Used Screw Pump for sale (13,593)

Condition: ready for operation (used), Year of construction: 1997, Stock-No. 13602 Manufacturer Krauss Maffei Type of machine KM 650 – 8000 CM Year 1997 Working hours 80000 h Controlversion MC 3-F Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1704 x 1700 mm Distance between tie bars (h x v) 930 x 930 mm Mould opening stroke 1150 mm Mould height min 600 mm Max. daylight 1750 mm Hydraulic ejector - stroke 250 mm Ejector force 226 kN Injection unit: Screw diameter 130 mm Ls/D ratio 20 Injection pressure 1296 bar Stroke volume 6172 ccm Shot weight (PS) 5617 gr. Injection rate 1540 ccm/s Screw speed 138 1/min Plasticising rate max. 238 g/s Nozzle pressure 246 kN Nodpfeub S R Hsx Agrjlg Electric and Hydraulic Equipment: Nominal capacity of pump motor 132 kW Installed heating capacity 70 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 12,00 x 2,80 x 2,70 m Total machine weight 43000 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - 2 x core pulls on movable plate - 2 x core pulls on fix plate - 8 x hotrunner controller - Robot interface according to Euromap 67

Condition: good (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: H2618, overall weight: 5,200 kg, total length: 3,400 mm, total width: 1,900 mm, total height: 2,400 mm, motor manufacturer: Grasso, power: 445 kW (605.03 HP), Used Grasso FKS PP 450/S water-cooled chiller operating on ammonia (R717). Complete with 1 Grasso HR-H36S-28 screw compressor, 2EC IE4-0DP-250M2 electric motor – 50 Hz – 110 kW – 2970 rpm, brazed plate heat exchanger as evaporator, brazed plate heat exchanger as condenser, Grasso oil separator with a capacity of 275 litres, oil cooler, oil pump, and a control cabinet with a Siemens Simatic HMI controller. Capacity is based on chilled water inlet/outlet temperatures of 12°C/6°C and cooling water temperatures of 27°C/32°C. Specifications Brand: Grasso Type: FKS PP 450/S Nlsdpfxoxz Ek Ue Agrsg Capacity: 445 kW / 126.5 Tons (Chilled water: 12°C/6°C & hot water: 27°C/32°C) Refrigerant: Ammonia Weight: 5,200 kg Dimensions: 3,400 x 1,900 x 2,400 mm (LxWxH) Compressor: Grasso HMR-H36S-28 Display: Siemens Simatic HMI Year of manufacture: 2017

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Nsdpfx Aeyhcabsgrslg Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: refurbished (used), Year of construction: 2020, Machine Type: Cylindrical Grinding Machine Manufacturer: Schaudt Maschinenbau GmbH Model: PS 4 Year of Original Manufacture: 1986 Renovation/Retrofit: 2020 Control System (Post-Retrofit): Siemens CNC SINUMERIK 840D General Specifications Application: External cylindrical grinding Grinding Method: Plunge, traverse, face grinding Control Type: CNC (Siemens retrofit in 2020) Machine Weight: Approx. 3,500 – 4,500 kg Installation Area: Approx. 3.5 m x 2.0 m Workpiece Capacity Center Height: 180 mm Distance Between Centers: 1000 mm (varies by version) Max Workpiece Diameter: 360 mm Nljdsw Avrzjpfx Agreg Max Workpiece Weight: ~150 kg between centers Grinding Spindle Grinding Wheel Diameter: 400 mm Grinding Wheel Width: 50 mm Bore: 127 mm Peripheral Speed: Up to 45 m/s Spindle Drive Power: ~7.5 kW Spindle Speed Range: Up to 1,500 – 2,500 rpm (depending on wheel size) Headstock Type: Fixed or rotating spindle Speed Range (if motorized): ~30 – 500 rpm Taper: MK4 or similar Drive: AC Servo (post-retrofit) Tailstock Type: Manual or hydraulically actuated Quill Stroke: Approx. 50 mm Quill Diameter: ~75 mm Axes X-Axis (infeed): CNC-controlled Z-Axis (longitudinal): CNC-controlled Resolution: 0.001 mm Drive Type: Digital servo motors with ball screw Position Feedback: Absolute/Incremental linear encoders Coolant System Coolant Tank Capacity: Approx. 150 – 250 liters Coolant Pump: High-pressure, with filtration system Other Features (Post-Retrofit) Siemens HMI with touch interface Electronic handwheels (MPG) Updated safety system and enclosure New electrical cabinet with ventilation and cooling Optional AE sensor for gap detection or touch dressing

Condition: excellent (used), Year of construction: 2016, Axial piston pump, hydraulic pump, oil pump, gear pump, screw pump -Manufacturer: Universal Hydraulics, hydraulic pump screw pump -Type: HSSPA-3/26.6-AVR-V4-01 Nljdpfxsvt Scls Agrjg -Motor: AC motors 3 kW -Dimensions: 760/250/H300 mm -Weight: 39 kg

Condition: ready for operation (used), Year of construction: 2013, operating hours: 23,000 h, clamping force: 1,200 kN, screw diameter: 40 mm, Hydraulic injection moulding machine manufactured in 2013. This SUMITOMO SHI DEMAG Systec 120/470-430 features a clamping force of 120 t and a screw diameter of 40 mm. It offers a maximum metering volume of 231 cm³ and a distance between tie bars of 470 x 470 mm. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG Systec 120/470-430 machine we have for sale. Contact us for further details. - Max. Specific Injection Pressure: 2025 bar- Max. Metering/Dosing Volume: 231 cm³- Mold Height Min./Max.: 250 / 850 mm- Distance Between Tie Bars: 470 x 470 mm- Centering Ring Diameter (Ejector/Nozzle): 125 mm- Core Pull: 1 circuit via switching valve on movable mold platen (Q-independent)- Operating Hours: Drives 23,000 hrs- Pump Drive Power: 22.0 kW- Power Supply: 400 V +-10% / 50 Hz, 3 Ph + N + PE- Oil Cooler Max Water Temp: 25°C Nlodpez Eq Svjfx Agreg

Condition: like new (used), Vacuum filler Continuous vacuum filler for straight filling and portioning Machine features: All-in-one 250 l hopper with counter arm and reinforced scraper, Nlodpfx Agsw Up Ncorsg Integrated vacuum pump 20 m³, Double screw, Standard double screw housing, Control: PC, Program memory for 99 filling programs, Portion weight: from 5 up to 60,000 g, Lifting and tipping device for HPC with 250 l hopper, To fit standard trolley, 200 l capacity, Machine dimensions in cm: Width: 134.0 Length: 220.0 Height: 200.0 Power: 9.5 kW Voltage: 380 V, 50 Hz Weight: 1300 kg

Condition: used, Year of construction: 2018, operating hours: 6,442 h, Technical Data Working Area Axis Travel - X-axis: 4000 mm - Y-axis: 1970 mm - Z-axis: 455 mm Machining Area - X working area: 3000 mm - Y working area: 1550 mm - Z clearance: 250 mm Axis Systems - X-axis: Helical rack and pinion drive - Y-axis: Precision ball screw drive - Z-axis: Precision ball screw drive - Linear guides on all axes - Automatic central lubrication Main Spindle - 5-axis electro spindle - Type: 5-axis spindle with universal joint - Power: 12 kW (S6 operation) - Tool holder: HSK F63 - Maximum speed: 24,000 rpm - Ceramic bearings with air cooling - Full power available at approximately 12,000 rpm - Speed range: 1,000 - 24,000 rpm - Clockwise rotation - Integrated tool changer interface - Liquid-cooled spindle - Electrically controlled extraction hood - Maximum tool weight: 6 kg - Maximum saw blade diameter: 350 mm Tool Changer System 12-position linear tool magazine - Mounted on the left side of the machine frame - Separate station for tool changers - Maximum tool diameter: 250 mm - Maximum tool length: 240 mm 18-position disc tool magazine - Mounted on the gantry - Suitable for drilling tools and tool changers - Maximum tool diameter: 250 mm - Maximum tool length: 280 mm Drilling Aggregated Head DH18 6H 1S drilling head - 12 vertical spindles: 7 spindles in the X direction, 5 spindles in the Y direction - 4 horizontal spindles in the X direction - 2 horizontal spindles in the Y direction - Drilling stroke: 70 mm - Maximum drilling depth: 70 mm - Tool holder: 10 mm - Individual control of the spindles - Integrated slotting saw - Saw blade diameter: 120 mm - Maximum slotting saw blade thickness: 5 mm - Speed up to 7,500 rpm Vacuum and Clamping System Console Table - 6 consoles with front and rear stops - Wireless two-circuit vacuum system - Height of vacuum cups: 100 mm - Pneumatic console locking - Programmable pneumatic stops - 4 adjustable side stops - Reinforced support arms - Load-bearing capacity of the support arms: 40 kg each Vacuum Pump Capacity: - 90 m³/h at 50 Hz - 108 m³/h at 60 Hz - Additional vacuum connection for template machining - Controlled compressed air connections for frame clamps - Separate vacuum and compressed air switching for all consoles WoodFlash Software Package Control Panel - Complete machine operation via the CNC panel - Program creation and editing - Tool and workpiece management - Manual machine commands - Monitoring of vacuum, compressed air and safety systems Mobile Control Panel - 24" LED monitor - Keyboard and mouse - USB connection Operator Device for Feed Rate Nlsdozuw E Rjpfx Agrog - Manual feed override potentiometer - Variable feed rate adjustment during machining Safety Devices - CE safety system - Safety mats instead of light curtains - Emergency stop system - Protective fence on the left side - Safety monitoring of the doors - Sensors to monitor vacuum and compressed air Optional Equipment - External release switch - Protected energy chain system - Additional locking for A and C axes - Saw blade changing station on the gantry - Operating hours: 6442 hrs.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 300 h, clamping force: 400 kN, overall weight: 2,180 kg, controller manufacturer: ARBURG, controller model: SELOGICA direct, Hydraulic injection moulding machine manufactured in 2019. This Arburg ALLROUNDER 270 C 400-100 features a clamping force of 400 kN and an opening stroke of 350 mm. It has a maximum injection pressure of 2500 bar and a shot weight of up to 29 g. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 C 400-100 machine we have for sale. Contact us for further details. Njdpjzvm Azsfx Agrslg - Control System: SELOGICA direct- Clamping Force: 400 kN- Opening Force: 130 kN- Opening Stroke: max. 350 mm- Mold Mounting Height (min.): 200 mm- Platen Distance (max.): 550 mm- Distance Between Tie-Bars (H x V): 270 x 270 mm- Size of Mold Platens (H x V): max. 446 x 446 mm- Weight of Movable Mold Half: max. 180 kg- Ejector Force / Stroke: max. 30 kN / 125 mm- Dry Cycle Time (EUROMAP): 1.2 - 189 s-mm- Injection Unit Size: 100- Screw Diameter: 20 mm- Effective Screw Length (L/D): 25- Screw Stroke: max. 100 mm- Calculated Stroke Volume: max. 31 cm³- Shot Weight (PS): max. 29 g- Material Throughput (PS / PA6.6): max. 5.5 kg/h / 2.8 kg/h- Max. Injection Pressure: 2500 bar- Max. Holding Pressure: 2500 bar- Max. Injection Rate: 64 cm³/s- Max. Screw Torque: 120 Nm- Nozzle Contact Force / Retraction Stroke: max. 50 kN / 180 mm- Heating Capacity: 4.95 kW- Hopper Capacity: 1.8 L- Operating Voltage: 400 V 3~ 50 Hz- Control Voltage: 230 V ~ 50 Hz / 24 V DC- Motor / Heating Rated Current: 42 A / 11 A- Total Rated Current: 53 A- Total Connected Load: 29 kW- Pump Motor Power: 11 kW- Hydraulic Oil Capacity: 165 L- Net Machine Weight: 2,180 kg

Condition: used, Year of construction: 2018, Delivery time approx. 5 months. Machine from educational use – TOP condition, low hours (edging unit unused). No tools included. Dismantling, delivery, assembly, commissioning, and training not included in the price. Includes Maestro 3D and Pro View. Nledpfx Aozvhlkogrjg MORBIDELLI P200 Working area X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm Edge banding made for you: The CNC machining center is equipped with a comprehensive selection of edge banding tools to meet any woodworking requirement. MAIN ADVANTAGES · High performance with the advanced H80C edge banding unit, 8,000 rpm drilling spindles. The most robust spindle technology on the market, offering over 1,000 maintenance-free operating hours. · Better equipped: Suction cups can be disabled and configured via the FLEX worktable to optimally adapt the machine to requirements. · Easier, more intuitive programming thanks to the integrated CAD-CAM module for edge banding technologies “MAESTRO EDGE”. · Easier operation: The lowered frame ensures the worktable is always accessible. The control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, no safety barriers are needed. Base structure: The base frame is a monolithic construction made from thick-walled steel, reinforced across the entire machine bed with welded square plates for exceptional rigidity. The bed’s shape, with a wide base, is the secret to lasting precision and stability. The load-bearing structure consists of a particularly robust, monolithic steel base, heavily ribbed and highly stiffened; the extra-wide support was specially designed to give the machine maximum stability, ensuring lasting precision regardless of operating conditions—with no need for floor anchoring. The base provides a large, solid support for the moving gantry: the working unit is thus equipped with a balanced, stable, and resilient support capable of handling the highest loads, ensuring top-quality performance and greater accuracy. The moving gantry is made from a robust single piece anchored to the base, sliding along top-quality prismatic guides with recirculating ball carriages. The working unit is attached and moves along the Y and Z axes on prismatic guides with recirculating ball carriages. Movement of the lower carriage (X-axis) and the working unit along the moving carriage (Y-axis) is enabled by rack-and-pinion transmission with helical teeth. This design results in greater tooth-on-tooth engagement, delivering higher acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures reduced wear on mechanical components and quieter operation. The vertical Z-axis is driven by a ball screw, ensuring perfect balance with dynamic loads and smooth acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage for maximum finishing quality.

Condition: excellent (used), Year of construction: 2012, Sumitomo Demag Systec 350/720-2300 / Production Line with Wittmann-Demag DR833 Robot Year of manufacture: 2012 Injection Unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cm³ Clamping Unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping system: toggle lever Control system: NC5 Additional equipment: Euromap 67 Robot interface 5x air valves 1x hydraulically operated core pull with proportional valve 5x hot runner controls Hardened injection unit – bimetal Moog proportional valve on the injection unit – high-precision injection Parallel movements Central lubrication 3 variable-capacity hydraulic pumps Nedpfjzy Inajx Agrolg Integrated printer Machine has been regularly serviced by authorized Sumitomo Demag technicians Robot Wittmann-Demag DR833 Year of manufacture: 2011 4-axis robot: 3 axes driven by servomotors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Axis travel: X-900, Y-1600, Z-3000 Touch control panel Robot safety package Robot with adapter, conveyor belt, and protective enclosure Purchase of the robot and conveyor belt at additional cost Dimensions: Weight: 15,750 kg L x W x H: 8.26 x 2.01 x 2.27 m All offered machines are started up by our service technicians prior to sale. It is possible to obtain a video of technical tests for the selected machine, or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: new, *IMMEDIATELY AVAILABLE* Includes: E & emergency hand pump Equipment: - Aluminum sideboards - Full steel floor - Ramp compartment Net price: €5,453.78 / Gross price: €6,490.00 Article number: HTK227311711.01 Technical data: • Brand: Humbaur • Model: HTK 2700.31 • Vehicle type: Three-way tipper • Vehicle condition: New • Initial registration: No initial registration • TÜV/MOT: 2 years from initial registration • Internal dimensions (L x W x H): 314 x 175 x 35 cm • External dimensions (L x W x H): 450 x 193 x 126 cm • Loading height of the floor: 75 cm • Permissible total weight: 2,700 kg • Tare weight: 870 kg • Payload: 1,830 kg • Chassis: High-loader (wheels under the body) • Tires: 195/50R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Aluminum sideboards, anodized, double-walled • All sideboards can be folded down and removed • Steel corner posts, removable • Rear flap can also be used as a swing gate • Insertion option at all 4 corners for tarpaulin frames, grille attachments, sideboard attachments or front panel extension • Stable toggle latches • Full steel floor – extremely robust • Very stable, screwed V-drawbar, REINFORCED • Very stable steel frame, welded • Frame completely hot-dip galvanized • Many cross members, resulting in high point load capacity • Additional longitudinal struts continuously welded • E-hydraulic system for tipping, with battery in the box and cover • 71AH battery • Battery is charged via a 13-pin connector from the towing vehicle (all pins of the socket must be connected) • External battery charging socket for 230V charger • Emergency hand pump for manual tipping in case of a dead battery • 6 lashing eyes recessed inside the side rails (800DaN/kg), TÜV certified! • Solid 4-stage hydraulic cylinder • Maintenance-free rubber spring axles from ALKO • Reverse automatic • ALKO overrun device and parking brake • Ramp compartment as preparation for aluminum ramps for easy retrofitting • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel, centrally located _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to make requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are protected by copyright!! Nlsdpfx Agjzy Am Derog Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale are subject to change -

Condition: used, Year of construction: 1991, operating hours: 2,000 h, Name: Used injection molding machine Manufacturer: Ferromatik Milacron (Klöcker) Type: FX50 R 35 Year built: 1991 Hours of operation: 2000 h Driving force: 15 kW Dimensions: L 4300 x W 1400 x H 2200 mm Empty weight: 3400 kg Nlodpexl R Sxjfx Agrjg Technical doc.: Yes Message: General Data: Dry cycle rate: 40 min, Pump drive: 15 kW, Total connected load: 25.7, Oil tank capacity: 180 L Injection unit: Screw diameter: 35 mm, Injection pressure: 1730 bar, Displacement: 116 cm3, Screw stroke: 120 mm, Maximum part weight: 99 g, Maximum injection flow: 505 g/s, Calculated injection capacity: 15 kW, Plasticizing flow: 29 g/s, Screw length: 22 LID, Maximum screw speed: 430 min, Maximum screw torque: 360 Nm, Installed heating capacity: 10.7 kW, Number of heating zones: 5, Nozzle compression force: 65 kN Clamping unit: Clamping force: 500 kN, Mold opening stroke: 350 mm, tool installation height min.: 200 mm, platen distance max.: 550 mm, ejector force: 34 kN, ejector stroke: 150 mm, clear distance between columns max.: 355×355 mm, clamping plate max.: 540×540 mm. Accessories: With two tool tempering devices. Condition: Second hand Price: By request

Condition: excellent (used), functionality: fully functional, power: 11 kW (14.96 HP), Year of construction: 2024, operating hours: 25 h, machine/vehicle number: 24168, The inoCOMB Cabrio small silo is used for mixing and conveying pumpable (mineral or organic) materials with a grain size of up to approx. 8 mm. Pre-mixed render mortar, dry mortar, screed material, or floor leveling compounds supplied by the material manufacturer can be processed. The material container of the small silo can be filled with bagged goods, one-way containers, or big bags as required. During operation, the dry material is conveyed from the material hopper into the mixing tube via the dosing screw. In the mixing tube, the dry material—while water is added—is mixed by the mixing shaft into a homogeneous, pasty or liquid product. At the outer end of the mixing tube, the mixed material is discharged directly into the pump hopper. In the pump hopper, the material is conveyed via the pump shaft to the pump unit (rotor/stator). From there, the material is pumped through material hoses to the application site. Nedpfx Aoyk Twpsgrslg

Condition: new, *IMMEDIATELY AVAILABLE* Includes: E & Emergency hand pump Equipment: - Full steel floor - Ramp shaft - Aluminum side panels Net: €5,621.85 / Gross: €6,690.00 Nlsdpfx Agezy A Hwereg Article number: HTK230311711.01 Technical data: • Brand: Humbaur • Model: HTK 3000.31 • Vehicle type: Three-way tipper • Vehicle condition: New vehicle • First registration: without first registration • TÜV/HU: 2 years from first registration • Internal dimensions (LxWxH): 314 x 175 x 35 cm • External dimensions (LxWxH): 450 x 193 x 126 cm • Loading height of the floor: 75 cm • Permissible total weight: 3,000 kg • Unladen weight: 870 kg • Payload: 2,130 kg • Chassis: High loader (wheels under the body) • Tires: 195/50R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Aluminum side panels, anodized, double-walled • All side panels can be folded down and removed • Steel corner posts, removable • Rear flap can also be pivoted • Insertion option at all 4 corners for tarpaulin frames, grille attachments, side panel attachments or front wall extension • Stable toggle closures • Full steel floor - extremely robust • Very stable, screwed V-drawbar, REINFORCED • Very stable steel frame, welded • Frame completely hot-dip galvanized • Many cross members, resulting in high point load capacity • Additional longitudinal struts continuously welded • Electric hydraulics for tilting with battery in the box and cover • 71AH battery • Battery is charged via a 13-pin connector from the towing vehicle (all pins of the socket must be occupied) • External battery charging socket for 230V charger • Emergency hand pump for manual tilting in case of empty battery • 6 lashing eyes recessed inside on the side edge (800DaN/kg), TÜV certified! • Solid 4-stage hydraulic cylinder • Maintenance-free rubber spring axles from ALKO • Reverse automatic • ALKO overrun device and parking brake • Ramp shaft as preparation for aluminum ramps for easy retrofitting • 13-pin connector • Reversing light • Large-dimensioned safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to inquire about specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or temporary license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Errors, omissions and prior sale excepted -

Year of construction: 1999, condition: used, Manufacturer : Clextral Model : EVOLUM+ 53 Year : 1999 Type: Twin-screw extruder Précédente application : Cuisson-Extrusion agroalimentaire AC motor: 130 kW Nsdpfoyy S Iyex Agrelg Length of screw : 2120 mm Screw elements: nominal diameter 53 mm. L/D : 40 Barrels : 10 units Peripheral equipment not included but available on request: Granulator, dosing unit, water pump and new electrical cabinet. (Their integration may be subject to a feasibility study and a supplementary quotation.) A wide range of applications: fish feed, pet food, snacks, meat substitutes…

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Machining system M8 cube B Traverse path: 1.020 mm x 830 mm (x, y), with tool changer 720 mm in Y • Feed: up to 22 m/min. • New Chip disposal concept; integrated central chip trolley • Complete cabin Coordinate table: Solid concrete polymer table with a steel frame, portal design with doubles -sided Y drive. • Z-stroke: 245 mm • Portal passage: 200 mm • Installation dimensions (without Terminal): 1.760 mm x 1.740 mm x 1.950 mm (Machine) • Drive system: digital servo drive; ball screw for every axis • Weight: approx. 1.300 kg Control DATRON next+ DATRON next - Option package: HF spindle, 3kWR0, HSK-E 25 R GMN HC80cg-40000, thread reducing clamp CNC Hand-held control unit B10-2 DATRON next Camera-Feature Tool magazine 12-fold (HSK-E 25) DATRON Tool length probe incl. blow-off station, M8Cube 12-fold TC High-precision probe Z TP-R Vacuum distributor 2-fold Pro Vacuum pump, 250 cbm/h 3x400V, 32A, Vacuum plate with meander-formed slots 1000x700x30 mm (M8/ML/MXCube, M10 Pro) Nledpfx Aozlbx Njgrsg

Condition: ready for operation (used), Year of construction: 2017, Suitable for: screw caps, drop inserts, press-on caps, flip-top caps, cup-to-cup closures, pipettes, brushes, spray pumps, triggers, rubber stoppers, crimp caps, ROPP caps and other closure types, equipment: mechanical rotary indexing table, pneumatic cap feeders, closing station for 1 closure type, extraction connection, IBC including drip tray, continuously adjustable transition from the discharge arm, machine enclosure: stainless steel 1.4301 (AISI 304), max. output depending on bottle, fill level and closure type: 60 bottles/min, compressed air connection filtered, oil-free: 6bar, connected load: 1.5kW, power supply: 3x 400V, connection area height: 792mm, cable routing: 317mm, overall length: 4200mm, with documentation. An on-site inspection is possible. Nljdpfxezadklo Agrjg

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, We are offering for sale a complete, fully functional ZREMB concrete plant, designed for the production of ready-mix concrete, precast elements, and paving stones. The plant is equipped with high-quality components from reputable manufacturers, automatic control, and a modern recycling and heating system, enabling year-round production. Key equipment: ZREMB Concrete Plant • Complete steel structure with enclosure, • Automatic control system SAUTER GmbH SUS 4.0, • Control container, • Full automation of the production process. ORU Mixers • Planetary mixer 750 l, • Planetary mixer EPM 3000 ES (3000 l), • EPM 3000 equipped with two independent discharge outlets, increasing production capacity. Dosing System • Lifting and filling device, • Tipping skips, • Buffer tank above the mixers, • Aggregate distributor for two mixers, • Cement scales for both mixers, • Water scale with flow meter, • Chemical additive dispenser, • Liquid pigment dispenser, • Microwave moisture probes in the mixers and aggregate tanks. Material Storage • Aggregate storage silo 6 × 25 m³ with a roof, • Aggregate belt scales, • 3 cement silos with complete equipment, • 1 two-chamber silo, • 5 screw conveyors. FEGO INDUSTRY Recycling System Complete installation for concrete and washout water recovery: • Capacity 12 m³/h, • Aggregate washing 2–32 mm, • Aggregate separator, • Washout water tank 40 m³, • Intermediate tank 1.5 m³, • Recycling tank, • 3 slurry pumps. FEGO INDUSTRY Heating System Water heating • Boiler 255 kW, • Capacity: • 13,500 l/h (10°C → 45°C), • 6,750 l/h (10°C → 70°C), • Fuel: light fuel oil, • Fuel consumption: 21.5 kg/h. Aggregate heating Hot air system: • Thermal power 250 kW, • Air temperature 110–120°C, • Capacity 6500 m³/h, • Fan 18.5 kW. Thanks to the installation, production is possible even during the winter season. The sale also includes: • Complete supporting structure, • Working platforms, • Enclosure made of sandwich panels, • Technological installations, • Electrical installations, • Complete control system, Njdpfxozw Aq Rs Agrslg • Technical documentation (if available). Advantages - Automatic concrete production - Two independent ORU mixers - Two discharge outlets from the EPM 3000 mixer - Complete washout water recycling - Water and aggregate heating - Possibility of operation throughout the year - Complete installation ready for dismantling and reassembly Interested parties are invited to contact us by phone at 605 583 061 to obtain detailed information and arrange a presentation of the equipment.

Condition: like new (used), Year of construction: 2015, clamping force: 1,200 kN, Engel E-Victory 170H/50V/120 combi (2015) 2k machine CC300 controll Clamping force: 1200 kN Mould min-max: 300mm Total tool max height: 800 mm plate size : 740 x 680mm Opening stroke: 505 mm Ejector stroke: 130 mm Nsdpfxsxyi Rvj Agrslg Ejector force: 39.8 kN Pump drive power: 15 kW Injection unit 1 Screw diameter: 25 mm Max. swept volume: 59 cm³ Screw speed max: 400 r/min Screw speed max (current): 400 r/min Injection rate: 109 cm³/s Injection rate (increased): 109 cm³/s Specific injection pressure: 2400 bar Specific injection pressure (increased): 2400 bar Injection unit 2 Screw diameter: 20 mm Max. swept volume: 25 cm³ Screw speed max: 450 r/min Injection rate: 104 cm³/s Specific injection pressure: 2400 bar Machine with conveyor. Working hours : 41.427 h Possible to buy robot Engel VIPER 20 Linear (Z=3320mm)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, operating hours: 5,000 h, machine/vehicle number: 90201097-0010/2003, screw conveyor diameter: 44 mm, screw conveyor length: 2,420 mm, For sale is a twin-screw extruder from the renowned company Berstorff, manufactured in 2003, for the production and processing of demanding rubber and TPE compounds. Nlsdpfsz Eqwrox Agrjg The system was operated in a pilot plant of a research institute and was used exclusively for research and development purposes. Unlike systems used in industrial production, the extruder was therefore not used in continuous production. Accordingly, the machine has only a few operating hours. The extruder is particularly suitable for research and development departments, compounders, and companies in the rubber and plastics industry that are looking for a high-performance system for trials, recipe development, material testing, and small-batch production. The detailed technical data and the available screw elements can be found in the attached documentation. The existing equipment allows for flexible configuration of the screw for different compounding tasks.

Condition: used, machine/vehicle number: 0000622128, EWM Titan XQ 400 puls DW Compact, used Nsdpfoyngdwex Agrelg Model: Titan XQ 400 puls EMC class: A Minimum welding current (A): 5 Maximum welding current (A): 400 Duty cycle at 40°C: 400 A / 80%, 370 A / 100% Open-circuit voltage: 82 V Mains voltage: 3 x 400 V Voltage tolerance: -25% to +20% Recommended generator power: 23.8 kVA Mains frequency: 50 Hz / 60 Hz Cooling capacity: At 1 l/min: 1000 W Pump pressure: 3.5 bar Tank capacity: 8 l Protection class: IP23 Dimensions: 1150 mm x 678 mm x 972 mm Multi-process pulse MIG/MAG welder with all welding characteristics and processes, non-compact, non-modular Drive XQ and Drive XQ HP wire feeders Swivel console for wire feeder "blueCool" coolant down to -10°C (14°F), 5 l, 5 l Interconnection cable set, water-cooled, 14-pin, 1.8 m Adapter for B300 basket spool MIG/MAG function torch, with OLED graphic display, water-cooled, X-technology, 4 m Ground cable with screw clamp, 450 A / 60%, 70 mm² Pressure regulator with manometer, 30 l Mains plug, installed

Condition: excellent (used), Year of construction: 2012, operating hours: 25,000 h, functionality: fully functional, clamping force: 8,500 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, Clamping force 8500 kN Mould opening force, max. 560 kN Travel force movable platen opening 89 kN Travel force movable platen closing 92 kN Size of mould platens (h x v) 1600 x 1600 mm Distance between tie bars (h x v) 1140 x 1140 mm Mould opening stroke 1600 mm Mould height min/max 500/1100 mm Max. daylight 2100 mm Hydraulic ejector - stroke 300 mm Ejector force 200/100 kN Injection unit: Screw diameter 95 mm Ls/D ratio 23 Injection pressure 1795 bar Stroke volume 3367 ccm Shot weight (PS) 3064 gr. Injection rate 690 ccm/s Screw speed 116 1/min Plasticising rate max. 104 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Nsdpsyb Sx Hefx Agrelg Installed heating capacity 53 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,00 x 2,60 m Total machine weight 43000 kg Max. mould weight 12200 kg Accessories: - Anti vibration pads Additional Options: - 1 x Air valve - 4 x hydr. core pulls - 12 x hydr. sequentional valves - 2 x 12 folds water flow regulator - Robot interface according to Euromap 67

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: AB1038, travel distance X-axis: 1,160 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,160 mm Travel range, Y-axis: 610 mm Travel range, Z-axis: 610 mm Table length: 1,320 mm Table width: 610 mm Accuracy: ±0.01 mm Feed rate, X-axis: 30 m/min Feed rate, Y-axis: 30 m/min Feed rate, Z-axis: 30 m/min Spindle speed: max. 12,000 RPM Nsdpfx Agozzx Hiorelg MACHINE DETAILS Control system model: Siemens Sinumerik 840D Input voltage: 400 V Weight: 7,000 kg EQUIPMENT Chip conveyor Documentation Oil mist separator Note: The machine has undergone regular electronic and mechanical maintenance. New ball screws were installed approximately 1 year ago.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, We offer 2 used screw pumps. Company: Montanbüro GmbH. Machine type: S5/7.5 kW. Year of construction 2017. Nsdpfx Agevdtagorslg Fully functional.