Used Surface Grinding for sale (9,979)

Condition: used, Year of construction: 1961, Technical details: grinding length: 600 mm grinding width: 200 mm workpiece height: 270 mm grinding length: mit Magnet: 500 mm Distance Spindlecenter - clamping surface area, min:: 350 mm grinding spindle speed: 1000...4700 U/min table surface area: 720 x 200 mm table load capacity: 60 kp Credpfx Acou Ngg Uemof magnetic plate size: 455 x 180 (Gleichstrom) mm magnetic-table: vertical kippen 90° längs Stück total power requirement: 2,0 (2,7 PS) kW weight of the machine ca.: 1600 + 176 kg Gleichrichter kg dimension machine xH: 1,4 x 1,8 x 1,7 m transport measurements machine: 1,4 x 1,8 x 1,6 m dimensions electric cabinet: L: 850 x B: 450 x H: 1.100 mm dimensions of grinding wheel: Ø 225 x 20 x Bohrung Ø 51 mm mm The magnetic plate (24V) is cooled. Grinding spindle: The grinding wheel infeed is electric, vertical 270mm, infeed z-axis 0,002 mm to unlimited inching infeed 0,001 - 0,010mm Peripheral speed max 35 m/sec. allowed equipped with coolant tank, pump and magnetic separator, as well as grinding wheel - size Ø 152 x 14mm plus various accessories (in the cabinet) like some grinding wheels and balancing flange The machine is pre-equipped for an exhaust system. *

Condition: used, Year of construction: 1987, Technical details: grinding length: 600 mm grinding width: 350 mm workpiece height: 600 mm feed: 1 - 30 m/min magnetic plate size: 610 x 255 mm distance table - spindle center: min./max. 150 / 420 mm grinding spindle speed: 3000 U/min stroke of the table: min./max.: 200 / 650 mm total power requirement: ca. 4,0 kW weight of the machine ca.: 2,5 t dimension machine xH: 1,5 x 1,9 x 2,0 m dimension coolant device LxWxH: 0,63 x 0,40 x 0,65 m Cedeu Ngicjpfx Acmorf Headstock: -vertical travel Y = 0.002 - 0.06 mm -adjustment = 0,001 - 2mm Cross slide: -transverse travel Z = 360mm -feed adjustment = 1 - 60mm/stroke -rapid traverse = 1.2 m/min. Dressing manual Cooling water unit with capacity 140Liter Equipment: -3x support feet -machine lighting accessories: -alignment device for grinding wheel holder *

Condition: used, Technical details: grinding length: 630 mm grinding width: 250 mm workpiece height: 300 mm Table dimensions: 2050 x 340 mm magnetic plate size: 600 x 250 (110V) mm feed range: Tisch: 0,005 - 0,045 mm/Hub feed of spindle: 0,001 - 0,045 mm/Hub dimensions of grinding wheel: Ø 220 x 46 mm total power requirement: 8,5 kW dimension machine xH: 2,1 x 1,8 x 1,9 m dimension coolant device LxWxH: 0,8 x 0,31 x 0,5 m -Longitudinal table stroke = 700mm -transverse travel of table = 800mm Coolant pump Crsdpeu Ngkmjfx Acmjf *

Condition: used, Year of construction: 1984, Technical details: grinding length: 500 mm grinding width: 250 mm workpiece height: 250 mm table surface area: 530 x 200 mm magnetic plate size: L:460 x B:150 x H:87 mm table speed: 2 - 32 m/min table adjustment: Längsweg: 550 mm Crjdpfx Aeu Ngkyjcmof table adjustment: Querweg: 300 mm feed of spindle: 0,001 mm/Hub grinding spindle speed: 3.000 U/min dimensions of grinding wheel: max. Ø 250 x B:25; Bohung Ø 76 mm total power requirement: 4,3 kW weight of the machine ca.: 2,2 t dimension machine xH: 2,3 x 1,8 x 2,2 m dimensions of hydaulic: L: 500 x B: 480 x H: 680 mm dimension coolant device LxWxH: 0,65 x 0,45 x 0,8 m The machine is currently equipped with a grinding wheel Ø 240 x 22mm. On the table there is a permanent magnet plate with 30 induction fields, operated by a hand lever. Operation via swiveling control panel. no dressing device incl. oil collecting tank; grinding wheel holder and available documentation *

Condition: good (used), functionality: fully functional, SINUS – Magnet by JUNG model HF 50 RD Width x Depth: 450 x 175 mm Csdpfoy Ugfvex Acmorf Pitch: 9 mm

Condition: excellent (used), functionality: fully functional, 800mm x 250mm, auto down feed, hydraulic dresser. Crjdjy S Uidepfx Acmef

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, ABA Easygrinder 5 Surface Grinding Machine. Year of manufacture: 2013 Technical specifications: Grinding length: 500 mm Distance from spindle center to magnetic chuck: 570 mm Grinding width: 250 mm Spindle power: 5.5 kW Spindle taper: 36 mm Grinding wheel: 300 × 50 × 76.2 mm Footprint (W × D × H, mm): 2,200 × 1,910 × 2,230 Machine weight (kg): 3,000 Options: Central lubrication, glass scale on Y-axis, variable speed control on the grinding spindle. The machine is in very well-maintained condition. Codpex Ti Sijfx Acmsrf Inspection under power is possible at any time by appointment in 58119 Hagen.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Technical details: Clamping table surface: 300 x 700 mm Electro-magnetic chuck: 300 x 600 mm Maximum travel: 640 mm x 320 mm Max. distance spindle center / table: 520 mm Max. workpiece weight*: 200 kg Grinding wheel: 300 x 30 x 75 mm Table speed, hydraulic: 2 - 18 m/min Automatic cross feed: 0.5 – 10 mm/stroke Rapid traverse, cross: 990 mm/min Graduation on handwheel: 0.02 mm Automatic vertical feed: 0.01 / 0.1 mm Rapid traverse, vertical: 360 mm/min Graduation on handwheel: 0.01 mm Grinding spindle motor: 4.0 kW Spindle speed: 1,440 rpm Hydraulic pump motor: 1.5 kW Length x width x height: 2,000 x 1,650 x 1,850 mm Weight approx.: 1,400 kg Surface Grinding Machine Bernardo FSM 3060 AHD 2-axis digital readout ES-12 H with LCD display Control with touch operation Electronic handwheel Grinding wheel Wheel flange LED work light Electro-magnetic chuck Balancing stand Balancing arbor Protective covers Demagnetizing unit Coolant system Diamond dresser Crjdpfx Aeyut A Tecmef Machine mounts Central lubrication Operating tools

Condition: used, Year of construction: 1996, grinding length 600 mm grinding width 250 mm workpiece height ca. 385 mm table surface area 600 x 200 mm Crjdpfx Acst Tqrnemsf table speed -stepless- 2 - 35 m/min table load capacity max. 250 kg grinding wheel size ø 225 x 25 mm grinding wheel hole diameter 50,8 mm vertical feed autom. 0,001 - 0,099 mm rapid traverse vertical 600 mm/min cross feed of table continual 10 - 1000 mm/min rapid traverse cross 1000 mm/min total power requirement 6 kVA dimensions of machine L x W x H 2,65 x 1,70 x 2,28 m Accessories: DRO on Y-and Z-axis, magnetic plate 600 x 200 mm, grinding wheel with flange, wheel trueing attachment, wet grinding attachment with paper band filter

Condition: used, Year of construction: 1999, grinding length 800 mm grinding width 400 mm workpiece height 375 mm table surface area 840 x 400 mm table speeds m/min Crjdpetz Evkjfx Acmsf spindle speeds (infinitely variable) 1000 - 3000 U/min grinding wheel motor 3,7 kW grinding wheel size 300 x 50 x 76,2 mm cross adjustment 100 - 1250 mm/min rapid traverse vertical 180 mm/min table load max. 700 kg distance spindle center to table max. 525 mm weight of the machine ca. 2,8 t dimensions of machine L x W x H 3,14 x 1,78 x 2,50 m Accessories: magnetic plate 800 x 400 mm, grinding wheel with flange, wheel dressing attachment, wet grinding attachment with paper band filter

Condition: used, Year of construction: 1967, grinding length 1650 mm grinding width 700 mm workpiece height 600 mm table surface area 1500 x 500 mm table speeds 0 - 20 m/min Cedpfxjtt S Uae Acmsrf cross feed autom. 0 - 20 mm/Hub grinding spindle speed 2000 U/min grinding wheel diameter 300 mm total power requirement 19 kW weight of the machine ca. 5 t dimensions of machine L x W x H 5,92 x 3,12 x 2,65 m Accessories: 2 magnetic plates, each 750 x 600 mm; grinding wheel with flange, various grinding wheels and flanges separate, wet grinding attachment

Condition: used, Year of construction: 1990, grinding length 900 mm grinding width 510 mm workpiece height 400 mm table surface area 800 x 400 mm longitudinal feed of the table max. 980 mm table speed -stepless- 1 - 35 m/min grinding wheel size 355 x 51 x 127 mm cross feed of the table 460 mm cross feed 1 - 40 mm/Hub vertical feed autom. 0,005 - 0,04 mm/Hub rapid traverse vertical 0,5 m/min grinding spindle speed 1450 U/min grinding spindle drive 5,6 kW table load capacity max. 1000 kg total power requirement 10 kW weight of the machine ca. 4,4 t Accessories: magnetic plate 800 x 400 mm, various grinding wheels with and Credpfx Ajtqqm Ajcmsf without flanges, wet grinding attachment with paper band filter

Condition: used, grinding length 1000 mm grinding width 750 mm workpiece height 700 mm Control SIEMENS, SIMATIC S 7-1500 table surface area 1050 x 640 mm table height over floor 1000 mm Cjdpfx Aexukqyscmerf table speeds 3.000 - 30.000 mm/min cross feed of table continual 5 - 5.000 mm/min cross feed of table intermittent 0,1 - 65,0 mm vertical adjustment, 1 graduation 0,002 mm rapid traverse vertical 0,25 m/min grinding spindle speed 50 - 2.500 U/min grinding wheel size ø 400 x 50 x ø 127 mm workpiece weight max. 1.000 kg table load max. 1600 kg total power requirement 33,2 kW weight of the machine ca. 9,3 t dimensions of machine L x W x H 4,50 x 2,37 x 2,65 m - complete electronic / electric renewed in 2018 Accessories: magnetic plate 1000 x 650 mm, grinding wheel with flange, wheel trueing attachment, extraction

Condition: used, grinding length 1000 mm grinding width 300 mm workpiece height 230 mm table surface area 1000 x 240 mm x-travel 1000 mm y-travel 270 mm z-travel 350 mm grinding wheel diameter 240 mm grinding spindle speed 2180 U/min Credpfx Acju Dn Txsmsf table speed -stepless- 3 - 30 m/min total power requirement 4,5 kW weight of the machine ca. 2,8 t dimensions of machine L x W x H 2,36 x 1,37 x 2,0 m Accessories: magnetic plate 680 x 200 mm, grinding wheel with flange (ø 240 x 25 mm), wet grinding attachment

Condition: good (used), - Table surface: 457 x 152 mm - Maximum distance between grinding wheel and table surface: 400 mm - Grinding spindle power: 2.2 kW - Grinding wheel dimensions: 200 x 25 mm diameter - Grinding wheel rotation speed: 1000-4000 rpm - Table travel speed: 1-25 m/min Crjdpfxswlhtvo Acmjf - Minimum programmable increment: 0.001 mm - Dimensions: 1800 x 1200 x 1950 mm

Condition: good (used), Year of construction: 2001, grinding length: 650 mm, grinding width: 525 mm, total height: 350 mm, table length: 600 mm, table width: 350 mm, Manufacturer: Geibel & Hotz Crodpfx Aovdal Aecmjf Type: FS 635-Z SA Control: Digital read out Year of construction: 2001 Magnetic table 600 x 350 mm Closed housing for CE Automatic vertical lubrication SA Automatic lubrication Coolant tank Specifications Metric US Standard X - axis 650 mm Y - axis 525 mm Z - axis 350 mm Table length 600 mm Table width 350 mm Table load 400 Feed X - axis 35000 mm/min. Feed Z-axis 1000 mm/min. Grinding stone dimensions 300 x 50 x 76.2 mm Power output 3.7 kW Speed 2800 ? rpm Dimensions (estimate) length 3200 mm width 2000 mm height 2870 mm weight 2300 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, Surface grinding machine ELB type SW 3 HA Juwel Machine no. No. 51810465 Year of construction 1965 Sanding area 300 x 150 mm Clamping surface 300 x 150 mm Electromagnet 300 x 150 mm Distance spindle center - magnet approx. 350 mm Grinding wheel diameter 175 mm Grinding wheel width max. 25 mm Grinding wheel speed 2800 rpm Cedpfsttc T Dsx Acmsrf Grinding spindle drive 0.75 kW Mains connection 380 Volt, 50 Hz. - Manual and automatic table cross adjustment (0.02 mm per graduation mark) - Manual cross adjustment via handwheel, travel per handwheel rotation, Y-axis 2 mm - Manual depth adjustment via handwheel, travel per handwheel rotation, Z-axis 0.2 mm - Longitudinal table movement via electric motor with 2 speeds - Grinding wheel extractor - Electromagnet type SD 15/30 Height = 78 mm - Lubrication pump for the table guide in the machine base - Wet grinding unit with pump opposite - Electric box Electromagnet for wall mounting - Operating instructions - Machine light Space requirement L x W x H 1250 x 1100 x 1950 mm Weight approx. 920 kg good condition

Condition: used, Surface grinding machine BLOHM, Type HFS 6 Manufacturer's No.: 10493 Year of manufacture: 1973 Electromagnetic clamping plate 600 x 300 mm Grinding length 600 mm Grinding width 400 mm Table longitudinal travel max. 650 mm Cross travel 350 mm Distance spindle center - table surface max. 600 mm Distance spindle center - magnetic plate max. 517 mm Table clamping area 1020 x 300 mm Grinding wheel diameter 300 mm Grinding wheel width 50 mm Grinding wheel bore 76 mm Table longitudinal feed 2-30 m/min, stepless Table cross feed 2-65 mm, stepless, electric Cross feed rate 3 m/min Vertical feed 0.001 - 0.020 mm per increment Vertical feed rate 0.250 m/min Grinding wheel speed 1400 / 2800 rpm Hydraulic pump motor power 2.2 kW Grinding spindle motor power 5 / 6 kW Power connection 380 V, 50 Hz Total power 11 kW - Automatic depth feed - Hydraulic table longitudinal travel Csdod Hbafepfx Acmjrf - Grinding wheel dressing device on the spindle head - Electromagnetic plate, height 83 mm - Coolant system, separate, with magnetic filter in the filter housing - Grinding spindle lubrication - Separate control cabinet (800 x 500 mm) - Swiveling control panel - Operating manual and spare parts catalog Space requirement L x W x H 3000 x 2200 x 2100 mm Weight of surface grinding machine 3000 kg Weight of control cabinet 200 kg Good condition

Condition: good (used), Year of construction: 1986, functionality: fully functional, Precision surface grinder Degen Codpoy S Ailofx Acmjrf Type FSHQV300 with digital display Technical data and features: >> Year of manufacture 1986 >> Max. grinding length 300 mm >> Max. grinding width 160 mm >> Working height with new/worn grinding wheel 240/290 mm >> Manual magnetic chuck 300 x 150 mm x 80 mm >> Rapid traverse in the feed direction >> Magnetic chuck >> Total power requirement 2.0 kW >> Space requirement length 1.0 m x width 0.9 m x height 1.7 m >> Weight approx. 450 kg About the machine: A precision surface grinder from the German manufacturer Willy Degen, type FSHQV300, is offered for sale. It can be used for surface grinding or plunge grinding with automatic feed. The feed dimension is entered via the digital display. This is a German-made product with high precision and represents a top-quality machine. Take advantage of the opportunity to inspect and test this machine on-site while it is powered up.

Year of construction: 2008, condition: used, overall weight: 5,600 kg, total length: 3,500 mm, total width: 2,500 mm, total height: 2,000 mm, Machine Number: 209311Control System: LC Control with Touch PanelTravel Paths:X: 1000 mmY: 600 mmZ: approx. 700 mm distance table–spindle centerMagnetic Clamping Plate:1000 x 500 mm - Electro-PermanentTable Load Capacity: approx. 1000 kgSpindle: Power: 7.5 kW (optional 18 kW) - Speed ControlGrinding Wheel:400 x 60 (100) x 127 mmTable Speed: 2 – 60 m/minCross Feed: 2 – 60 mm/pulse - continuous up to 5 m/minEquipment:Belt Filter System Coolant SystemPartial Enclosure Dressing UnitElectrical Connection:400 V / 50 Hz approx. 100 A Dimensions (LxWxH) approx.: 3500 x 2500 x 2000 mm Grinding length: 1,000 mm Grinding width: 700 - mm Weight approx.: 5,600 kg Grinding height: 600 - mm Year of construction: 2,008 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation Cedpoy S Nilsfx Acmorf under power: Yes

Condition: excellent (used), Year of construction: 2008, Table size 600 x 300 mm Max. grinding area 600 x 300 mm Dimensions of the grinding wheel 406 x 50 x 127 mm Min. / max. distance table / spindle center 500 mm Table speed, hydraulically adjustable 5 - 25 m/min. Crossfeed 0.1 – 20 mm Cross travel rate 900 mm/min. Handwheel, cross 1 revolution 5 mm 1 division mark 0.02 mm Automatic vertical feed 0.001 - 0.999 mm/cycle Handwheel, vertical 1 revolution 2 mm 1 division mark 0.01 mm With AD 5 (automatic feed) 0.005 mm Grinding wheel spindle speeds 1450 / 2900 rpm Grinding motor 1.5 / 3.7 kW Hydraulic pump motor 0.75 kW Drive motor, cross 1.1 kW Drive motor, vertical 1.1 kW Machine dimensions L x W x H approx. 2300 x 1800 x 2100 mm Weight 1700 kg Accessories / Special features: • 2-axis digital display • Automatic vertical feed with spark-out and subsequent lift • Electro-magnetic clamping plate L x W 600 x 300 mm • Manual grinding wheel dressing device • Grinding wheel speed, 2 stages Cjdpfx Acoizka Ijmjrf • 1 piece grinding wheel with flange • Control panel • Lighting • Coolant system with belt filter and magnetic separator • Machine feet • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 11-153 D - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1991, grinding length: 500 mm, grinding width: 200 mm, Jung JA500-E Crsdpfx Aoy Iy Ukocmof 1991

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 197430 € 3731.43 € 1010 mm 590 mm 1000 x 400 mm 1000 x 400 mm 0 -25 m/min 0 - 4000 mm/min Crjdpfxsy Ubbfj Acmef 0,001 mm 450 mm 450 mm 0 - 3800 mm/min 0.001 mm 600 - 3600 1/min 11 kW 3675 mm 4055 mm 2480 mm 6500 kg 423 kg 670 kg 405 x 50 x 127 mm 2,4 / 3,9 kW 5.9 kW 0,005 mm 0,003 mm Rigid machine construction with a movable column for effective stability to ensure high grinding performance and machining accuracy Smart iControlIV control with 15" touchscreen with electronic wired handwheel PC-based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multi-groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 6 angular contact ball bearings (4 front and 2 rear) All 3 axes with precision ball screws and AC servo motors A balancing system is attached to the spindle housing to reduce stress on the machine structure Full enclosure with lighting Electromagnetic chuck Coolant system 300 l/min with drum paper filter and magnetic separator Driven wheel dressing device mounted on the table, 1.7 kW, with double support, width 200 mm, diameter 35 or 52 mm Grinding wheel Grinding wheel flange Grinding wheel balancing scale Heat exchanger for the control cabinet Machine and equipment compliant with CE regulations Operating instructions in GERMAN or ENGLISH Accuracy standard ISO 1986-1 OPTIONS (prices on request): Linear encoders for Y and Z axes Oil mist collector

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 171130 € 3234.36 € 610 mm 590 mm 600 x 300 mm 600 x 300 mm 0 - 25 m/min 0 - 4000 mm/min 0,001 mm 350 mm 450 mm 0 - 3800 mm/min Crsdjy Uba Ujpfx Acmef 0.001 mm 600 - 3600 1/min 11 kW 3103 mm 3933 mm 2480 mm 5800 kg 810 mm 314 kg 420 kg 405 x 50 x 127 mm 2,4 / 3,9 kW 3.9 kW 0,005 mm 0,003 mm Rigid machine construction with a movable column for effective stability to ensure high grinding performance and machining accuracy Smart iControlIV control with 15" touchscreen with electronic wired handwheel PC-based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multi-groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 6 angular contact ball bearings (4 front and 2 rear) All 3 axes with precision ball screws and AC servo motors A balancing system is attached to the spindle housing to reduce stress on the machine structure Full enclosure with lighting Electromagnetic chuck Coolant system 200 l/min with drum paper filter and magnetic separator Driven wheel dressing device mounted on the table, 1.5 kW, with double support, width 100 mm, diameter 35 or 52 mm Grinding wheel Grinding wheel flange Grinding wheel balancing scale Heat exchanger for the control cabinet Machine and equipment compliant with CE regulations Operating instructions in GERMAN or ENGLISH Accuracy standard ISO 1986-1 OPTIONS (prices on request): Linear encoders for Y and Z axes Oil mist collector

Condition: used, Year of construction: 1989, MAKE GER, MADE IN SPAIN MODEL RS 10/60 YEAR TABLE LENGTH 1300.0 mm TABLE WIDTH 600.0 mm TRAVEL X AXIS: 1600.0 mm Y AXIS: 600.0 mm MAX DISTANCE (TABLE TO WHEEL) 800.0 mm MAX WORKPIECIE WEIGHT 1000 KGS GRINDING WHEEL SIZE 400.0 x 100.0 x 127.0 mm SPINDLE SPEED MAX 1500 RPM MACHINE DIMENSIONS 4600.0 x 2700 x 2600.0 mm Codpfx Asy Du N Uecmjrf MACHINE WEIGHT 7600 KGS PLUS ELECTROMAGNETIC CHUCK SIZE: 1000.0 X 600.0MM HYDRAULIC PACK COOLANT SYSTEM WHEEL MOUNTED DRESSER