Used Temperature Test Chamber for sale (15,740)

Condition: used, Concrete sample press for concrete and material testing Dedpfx Ajxb Nv Ujktjkn Flexural strength test Determination of compressive strength

Condition: excellent (used), Two-chamber stainless steel tank 66m3 (40 + 26 m3) DIMENSIONS: - Diameter: 3,245 mm - Height: 13,053 mm Year of manufacture 2006 Weight: 4,680 kg Upper part: 40° slope - Lower part: 2% slope. DN 600 hatch with hinged cover at the top. stainless steel pressure-vacuum valve Dkjdpjvlpctofx Akten At the bottom, a DN400 hatch with a hinged cover a stainless steel pressure-vacuum valve Upper tank heating: 6 coils, exchange surface 6.95 m2, PS 2 bar Above 2 coils, exchange surface 2.33 m2, PS 2 bar A device for moving grounds, test valve Lower tank heating: 4 coils, exchange surface 4.64 m2, PS 2 bar. Above: 2 coils, exchange surface 2.33 m2, PS 2 bar. Liquid level gauge 555x432 rectangular hatch DN70 ball valve The tanks were used in the wine industry. The tanks have a technical drawing. The tanks are dismantled and ready for delivery.

Condition: good (used), Year of construction: 2007, max. wheel diameter 500 mm gear width 200-400 mm module 12 Dkedpfjvr Hf Eex Akton turning speeds 0-3250 U/min bracke pressure bis max. 95 Nm inner taper Konus #39 Control Fanuc 16 total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2.350 x 2.240 x 2.500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS The T 60 bevel gear testing machine is a CNC testing machine with three linear axes for the fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers versatile objective and subjective testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm.

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Dedpfx Aertrzdjktekn Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: good (used), Year of construction: 2002, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is Dodow N S E Aepfx Aktokn largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: good (used), Year of construction: 2005, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, 2005 CIMC tank container 20FT ISO tank container, 25,010 L / 1 compartment. T11, UN PORTABLE Steam heating Bottom discharge Dkjdpfx Aozb Ei Esktjn Design temperature: -40/+130 °C 5Y+CSC test valid until 05/2027 = Additional Information = General information Year of manufacture: Aug. 2005 Model year: 2005 Weights Empty weight: 3,800 kg Payload: 32,200 kg Gross weight: 36,000 kg Functional Cargo volume: 25,000 l Body brand: CIMC ONE WAY 20FT, 25,000L tank container, L4BN, UN Portable, T11 Number of compartments: 1 Condition Technical condition: very good Visual condition: good Further information Contact Arne Honingh for more information.

Condition: used, Year of construction: 1995, machine/vehicle number: 15809, functionality: not functional, Vacuum Dryer / Drying Chamber DWT / IWT MD 2600 x 15000 Used Compact System The machine is still connected to power and heating but has not been in use for the past 6 months. *PLC control renewed in 2014* *Vacuum pump defective* Dkodpfx Asy Aawnjkten Dryer diameter: 2600 mm Dryer length: 15000 mm Package length: 15000 mm Package width: 1200 mm Package height: 2100 mm Gross capacity: 38 m3 Net capacity: 25 m3 of sawn timber or 18 m3 of log wood Electrical connection: 50 kW Power consumption: 18 kWh Drain: 50 mm Water connection: 25 mm Heat connection: 87 kW, 85 °C hot water at the dryer Heat consumption: 500 kcal per liter moisture or 0.6 kW per liter moisture Including heating boiler operated with heating oil (*approx. 15-20 years out of service*) Hydraulic, fully automatic boiler closure Boiler material: solid stainless steel according to DIN, x5 Cr Ni 189 150 mm insulation, sheathed with 1 mm galvanized steel sheet 1 rail bridge in front of the boiler 5 trolleys for loading and unloading, each approx. 3000 mm long 15 fans with Siemens motors Heating register as stainless steel finned tubes with aluminum fins, approx. 180 m long, surface area 280 m2, diameter 25 mm Supply and return pipes, diameter 80 mm Heating medium: 85 °C hot water at the user Circulation pump capacity: 75 m3/h 3 fans for steam condensation Rails in front of the dryer: 16000 x 600 mm The entire system stands on a concrete foundation and can be lifted and loaded as a single unit with a crane. Dimensions for transport: approx. 21000 mm long, 3050 mm high (without cooling system) Sale from location 52146 Würselen, without dismantling, without transport and installation. Dismantling, loading, and transport by us optionally available. Subject to error in description and price. To avoid possible misunderstandings, inspection on site by appointment is possible and recommended. Sale as is.

Condition: used, El. heated chamber oven, make Heraeus Djdpfsxlq Tpox Aktekn Type: PL 320 Temperature: max. 650°C Clear dimensions (W x D x H): approx. 280 x 440 x 200 mm

Year of construction: 2011, operating hours: 34,000 h, condition: used, functionality: fully functional, Two double-temperature control units from the company Single are for sale: Dedpfozbx Rpsx Aktekn Medium: Water Heating capacity: 9 kW per unit Cooling capacity: 20 kW per unit Mobile Interface: PT 100 sensor Alarm

Condition: excellent (used), Liebisch SKBWF 1000 A-TR Corrosion Testing Device Manufacturer: Gebr. Liebisch GmbH & Co. KG Type: SKBWF 1000 A-TR Corrosion testing device / salt spray chamber for salt spray, condensation water, and combined testing. Technical Data Dkodjzba N Tepfx Aktjn Test chamber volume: approx. 1000 liters External dimensions: approx. 2600 x 1120 x 1210 mm Internal dimensions: approx. 1535/1425 x 800/780 x 660/650 mm Max. test specimen load: 10 kg per level Voltage: 400 V Frequency: 50 - 60 Hz Phases: 3~ Rated current: 12 A Power data according to nameplate: S Watt: 2800 W K Watt: 2150 W B Watt: 500 W W Watt: 1700 W Test solution reservoir: approx. 150 liters Distilled water consumption (humidifier): approx. 80 - 120 ml/h Test solution consumption: approx. 0.7 - 1.0 l/h Water filling volume (bottom trough system): approx. 15 liters Testing procedures DIN EN ISO 9227 DIN EN ISO 6270-2 VDA 621 / 415 ASTM B 368 MIL STD 202 F-101D VW PV 1210 Equipment Automatic control Touch panel / operating panel GFK test chamber Test specimen grids Test specimen holders Connections for temperature, humidity, compressed air, and test solution NaCl test solution supply Deionized water supply Condition Used device from industrial application. Optical condition according to the pictures. Interior with visible deposits / corrosion traces. Device can be switched on, display is active. A complete technical functional test under test conditions was not performed by us. Inspection possible by appointment. Scope of supply: see pictures. Loading can be arranged. All information provided to the best of our knowledge based on available documents, nameplates, software displays, and data sheets. Errors and changes reserved.

Condition: good (used), Weiss SC 450 Corrosion Testing Equipment Manufacturer: Weiss Umwelttechnik GmbH Type: SC 450 Corrosion testing equipment / salt spray test chamber for salt spray tests, condensation water tests, corrosion testing, material testing, and quality assurance. Technical Data Test chamber volume: approx. 480 liters Test chamber height with hood: approx. 1190 mm Test chamber height without hood: approx. 740 mm Width to spray nozzle: approx. 750 mm Depth: approx. 570 mm External dimensions: Height with hood: approx. 1370 mm Height without hood: approx. 920 mm Width: approx. 1930 mm Depth: approx. 800 mm Temperature range, salt spray test: 5 K above ambient temperature to +50 °C Temperature range, condensation water test: 5 K above ambient temperature to +45 °C Temperature stability over time: ±1 K Brine tank: approx. 180 liters Compressed air: min. 4 bar / max. 10 bar Weight empty: approx. 180 kg Electrical Data Voltage: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2 kW Rated current: 8.7 A Dkedpfx Akezbatrjten Equipment Liebisch / Weiss control system S!MCON/32 control and regulation unit Color touch panel Acrylic glass nozzle in the spray channel Heated compressed air humidifier Flow and dosing device for brine Brine storage tank Test specimen holder / support tubes Floor grate Measurement and connection fittings Test procedures Salt spray test according to DIN EN ISO 9227 / DIN 50021 Condensation water test according to DIN EN ISO 6270-2 / DIN 50017 Condition Used equipment from industrial use. Operating hours according to display: approx. 37,926.6 h Optical condition according to pictures. Interior with visible deposits / corrosion marks due to use. The device can be switched on, display is active. A complete technical function test under test conditions has not been carried out by us. Inspection and testing on-site are possible by arrangement. Scope of delivery: see pictures. Loading can be arranged. All information provided to the best of our knowledge based on available documents, nameplates, software displays, and manufacturer data. Errors and changes excepted.

Condition: used, circulating medium 25 °C Cooling capacity 10 kW Rated power supply 5,45 kW Dedpfx Aezbc Hbsktekn Operating/control voltage 400-415/24 V / 50 Hz Rated current/max. fuse 15,2 / 25 A The temperature control units are, in our assessment, in good used condition. The offer includes two units. Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: excellent (used), Year of construction: 2020, AKE technologies Shaker System for Vehicles Manufacturer: AKE technologies GmbH Type: Shaker System for Vehicles Year of Manufacture: 2020 For sale is a professional vehicle shaker system for vibration, resonance, and NVH (Noise, Vibration & Harshness) testing. The system is used to perform reproducible vibration and load tests on vehicles, assemblies, and components. The system enables the simulation of vehicle vibrations, road influences, resonances, and noise generation under controlled testing conditions. Technical Data Operating voltage: 3 x 400 V AC / 50 Hz Dkjdpfxezazm Ro Aktjn Control voltage: 24 V DC Power consumption: approx. 4 kW Compressed air supply: 6 bar Compressed air consumption: approx. 0.3 m³/min Total system weight: approx. 4,000 kg Stroke and positioning system: Approx. 1,000 kg load capacity per lifting table according to documentation Shaker Data AKE HPS350 High-Power Shaker Frequency range: DC to 3,000 Hz Dynamic force: up to approx. 2.6 kN Static force: approx. 11 kN Stroke: approx. 5.5 mm peak-to-peak Max. velocity: approx. 0.74 m/s Max. acceleration: up to approx. 22 g Natural frequency: approx. 65 Hz Software Vibration Research VibrationVIEW AKE Drive File Manager Unlocked Functions: 8 Input Channels Sine up to 4900 Hz Random up to 4900 Hz FDR up to 4900 Hz Sine Multichannel Random Multichannel Dual Loop Control Equipment Industrial control cabinet with power electronics Operator computer High-power shaker units Vehicle wheel mounts Stroke and positioning units Lifting columns with crossbeam Measurement and sensor technology Operating and emergency stop units Application Areas NVH analyses Vibration tests Resonance studies Noise analyses Component testing Endurance tests Research and development Condition Used system from industrial application. Optical condition, see pictures. The system has been disassembled and stored. A complete technical functional test under load has not been performed. Scope of Delivery AKE Shaker System for Vehicles Industrial control cabinet Operator computer Installed software High-power shaker units Vehicle wheel mounts Lifting columns with crossbeam Documentation Software media Accessories according to pictures Inspection possible by appointment. Loading can be arranged. All information provided to the best of our knowledge. Errors, changes, and prior sale reserved.

Year of construction: 2014, operating hours: 150 h, condition: as good as new (ex-display), The temperature control unit from GWK is for sale; it was only used at trade shows. I can gladly send you a description of the unit! Medium: Water Heating capacity: 9 kW Operating temperature: max. 160 degrees Celsius Dkedsza U Dcjpfx Akten Cooling capacity: 40 kW Cooling: Heat exchanger Mobile

Year of construction: 2026, condition: as good as new (ex-display), Universal Testing Machine PM10 Force: 10 kN Crosshead stroke: 700 mm Test area: 400 mm Overall height: 1230 mm Weight: approx. 85 kg Travel resolution: 0.01 mm Test speed: 1–500 mm/min Return speed: 700 mm/min Load cell: 10 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for 'quick tests' without the need for a PC. For tests requiring data storage and curve recording, the basic software provides full control and evaluation capabilities. Dkjdpfjyc U Ugjx Aktsn It allows you to generate various test sequences and create test reports. In addition, you have the option to further process the raw data in your own programs. Options: - Delivery and commissioning - DAkkS or factory calibration in accordance with DIN EN ISO 7500-1 - Grips and Fixtures: Compression plates, bending fixtures, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Year of construction: 2026, condition: as good as new (ex-display), Universal Testing Machine PM5 Force: 5 kN Traverse Travel: 520 mm Working Depth: 66 mm Overall Height: 1036 mm Weight: approx. 48 kg Position Resolution: 0.01 mm Test Speed: 1–500 mm/min Return Speed: 700 mm/min Load Cell: 5 kN Incl. evaluation electronics and basic software. Dkjdpfx Akoydanhjtjn Our testing machines can be operated in stand-alone mode via a numeric keypad, enabling “quick tests” without the need for a PC. For testing procedures requiring data storage and curve recording, our basic software provides both control and evaluation functions. This allows you to generate different test sequences and create a test report. In addition, raw data can be further processed in your own software. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips and fixtures: Compression plates, bending fixtures, shear devices, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PM3, Universal testing machine PM3 (2026) Force: 3 kN Crosshead travel: 520 mm Working space depth: 66 mm Dksdpfeyc U Dbex Akten Overall height: 1036 mm Weight: approx. 40 kg Displacement resolution: 0.01 mm Testing speed: 1-500 mm/min Cc7d2rmq Return speed: 700 mm/min Load cell: 3 kN Includes evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for a “quick test” even without a PC. For tests that require data storage and recording of the curve profile, we offer the option to control and evaluate the tests using the basic software. This allows you to generate various test sequences and create a test report. Furthermore, you have the option to process the raw data in your own programs. Optional: - Delivery and commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamping devices: Pressure plates, bending fixtures, shear fixtures, wedge clamps, scissor clamps, peeling clamps, screw clamps, pneumatic clamps, and hydraulic clamps.

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, Universal testing machine PM3 Force: 3 kN cross beam stroke: 520 mm Dedpfx Aofdzupektjkn Working area depth: 66 mm total height: 1036 mm Weight: ca.40 Kg Travel resolution: 0.01 mm testing speed: 1-500 mm / min Cc7d2rmq Return speed: 700 mm / min Force transducer: 3 kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Year of construction: 2026, condition: as good as new (ex-display), Universal testing machine PM3 Force: 3 kN cross beam stroke: 520 mm Working area depth: 66 mm total height: 1036 mm Weight: ca.40 Kg Travel resolution: 0.01 mm testing speed: 1-500 mm / min Return speed: 700 mm / min Force transducer: 3 kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & commissioning -DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Djdod R Dpuspfx Aktjkn Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Year of construction: 2026, condition: as good as new (ex-display), Universal testing machine PM5 Force: 5 kN crosshead stroke: 520 mm working chamber depth: 66 mm total height: 1036 mm Weight: approx.48 Kg travel resolution: 0,01 mm test speed: 1-500 mm / min Return speed: 700 mm / min Force transducer: 5 kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, so that a "quick test" can also be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This enables you to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & Commissioning Dkedpjd R Dqbefx Aktsn -DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamping fixtures: Pressure plates, bending fixtures, shear fixtures, wedge grips, shear grips, peeling grips, screw grips, pneumatic grips and hydraulic grips.

Condition: good (used), Process controller, controller, temperature controller, temperature sensor, temperature setting -Type: KROt-96/a,re11 -Setting value: from 0 to 1200 °C -220 V 5 A Dsdpfx Akeb A Sv Totskn Price: per piece -Quantity: 2 available -Weight: 0.6 kg

Condition: used, Year of construction: 2020, Good condition. Single module! Dodpowcrlkofx Aktekn Ask for additional information!

Condition: ready for operation (used), Chamber depth: 750mm, sealing bar configuration 2x 650mm per chamber, built-in, electrical connection 3 x 400/415V 50Hz, 3 x 220V 60Hz, weight approx. 650kg (with 300m³/h vacuum pump), packaging speed approx. 2–3 cycles/minute. Length: 1600mm, width: 1055mm, height: 1045mm, weight: 650kg. An on-site inspection is possible. Djdsw Nq Sbepfx Aktekn

Year of construction: 1976, condition: used, Technical details: diameter: 500 mm workpiece weight: 30 kg test dia. min.: 200 mm Dkodpfx Akjyyapxstsn total power requirement: 0,03 kW weight of the machine ca.: 1000 kg dimensions of the machine ca.: 1x0,5x1,06 m

Year of construction: 2019, condition: excellent (used), Memmert ICH 750 L eco – ex demo (2019) – L version with lighting We offer a Memmert ICH 750 L eco climate chamber, L version (with lighting), from 2019. This unit comes directly from the manufacturer's showroom and has been used very little. It is in very good technical and visual condition. Key features: * Model: ICH 750 L eco (L version – with lighting) * Year: 2019 (ex demo) * Capacity: approx. 750 liters * Temperature range: * without humidity: 0°C to +60°C * with humidity: 0°C to +60°C * Humidity range: 10–80% RH * Energy-efficient ECO cooling system * Digital controller with intuitive operation * Stainless steel chamber L version – lighting: * Integrated lighting system (light + UV) * Ideal for photostability testing (e.g., according to ICH Q1B) * Uniform illumination of samples * Possibility of operation in day/night cycles Equipment and advantages: * Precise temperature and humidity control * Very good uniformity of conditions within the chamber Dkedpfxsymy Utj Aktjn * Quiet and stable operation * Reliability and high-quality Memmert construction Condition: Ex demo unit – minimal signs of use, fully functional, tested before sale. Additional information: Upon request, we can send photos, a video of the unit in operation, or conduct an online presentation. 9-month warranty on spare parts for the unit.