Used Teufelberger Strapping Tape 6X055Sw for sale (1,258)

Condition: new, maximum load weight: 36,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment Complete equipment available upon request GOOSENECK * Designed in SNT to optimize the loading area length * Length approximately 3,700 mm, with a rear slope of approximately 1,000 mm x 6° For SZM: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX Grid floor with 5 mm sheet metal reinforcement on the gooseneck and the rear slope * 2-inch kingpin * Guide plate from the gooseneck for the fifth wheel plate, approximately 500 mm wide, round * NATO socket on the connection strip at the front on the gooseneck * 1 pair of pluggable aluminum side panels, approximately 400 mm high, in anodized design * 1 LED work light each on the left and right, mounted at the top of the front wall * Controlled via on/off switch (operation of the work lights from the SZM is not possible in this case) LOADING AREA * Length approximately 9,600 mm, with a rear slope of approximately 900 mm x 6° * Loading area after the gooseneck can be hydraulically raised and lowered, length approximately 3,000 mm * Load capacity up to approximately 9,000 kg on the lifting platform and the loading area, continuous grid floor with approximately 5 mm sheet metal underlay as additional reinforcement, designed for point load TIRES * 235/75 R 17.5 3PMSF, twin tires, manufacturer of our choice * TPMS tire pressure monitoring system in accordance with ECE R 141 AXLES * BPW axles and suspension * 1st and 2nd axles rigid * 3rd axle with trailing steering * 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * 1st axle with start-assist * Technical axle load: 12,000 kg each AIR SUSPENSION * with raising and lowering valve HYDRAULIC LOADING RAMPS * 1 pair of two-piece AXS steel ramps with grid floor and a length of approximately 4,920 mm and a width of approximately 900 mm * Hydraulically foldable ramp tips, ramps can be individually moved hydraulically outwards by approximately 235 mm and inwards by approximately 365 mm * Flashing lights on the outer sides of the ramp tips, with a switch next to the ramp control * Ramp securing in driving position by means of a quick-release fastener * Painted sand coating on the outer frame of the ramp as well as on the ramp tip * Mechanical supports in drop tube design on the sides of the ramps to support when docking with loading ramps * Control valves for the hydraulic ramps on the right side of the vehicle BRAKE SYSTEM * From WABCO EBS-E according to EU regulations SURFACE TREATMENT * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure the best corrosion protection Csdpfx Aszzhfuodrerh PAINTING * Semi-trailer carmine red (RAL 3002) * Rims silver gray, side panels aluminum natural * Wheel hubs according to axle manufacturer, lamp sign pure white (RAL 9010) EQUIPMENT * Front wall made of steel, pluggable, approximately 1,600 mm high * Including connection strip for supply lines to the SZM, mounted approximately 1,000 mm from the lower edge of the outer frame profile * Possibility to attach lashing chains on the inside of the front wall on the left and right * Including aluminum tray underneath on the left and right for storing chains or lashing straps behind the front wall, approximately 12 mm thick DELIGNIT surface, screwed on * 2 pairs of screwable lashing rings additionally (LC 5,000 daN) * Electric winch, approximately 5,400 kg pulling force, with

Condition: good (used), functionality: fully functional, year of last overhaul: 2023, EN: For sale a complete and efficient line for profiling steel sheet from tape, e.g. Magnelis, into any profiles, e.g. type C, used in photovoltaic installations and farms, construction of steel halls, shelters as well as for furniture production, etc. The line with the unwinder is located in a heated hall in almost laboratory conditions, for the buyer the possibility of starting it up before purchase, I have contacts to companies that supply sets of profiling rollers for specific profiles as well as to companies dealing with the modernization of such machines in terms of its expansion, etc. Cjdpfx Adeu A U Utsrerh

Condition: new, 40 ready-made straps 5580 mm Credey Ud Nxjpfx Adrjh 48 mm

Condition: excellent (used), Year of construction: 2017, operating hours: 550 h, functionality: fully functional, load capacity: 16 kg, arm reach: 1,610 mm, controller manufacturer: KUKA, controller model: KRC4, teach pendant manufacturer: KUKA, teach pendant model: KCP4 (SmartPAD), We offer a complete, fully functional industrial robot set with a controller. This machine has very low operating hours and is ready for use in demanding applications (palletizing, welding, machine tending). The set includes: - Manipulator: KUKA KR16 1610 (reach 1610 mm, payload 16 kg) - Controller: KRC4 - Programmer: KCP4 (SmartPAD) - Complete cabling (power, signal) - Steel pedestal: Dimensions 800x800 mm, height 1000 mm (rigid construction) Installed software packages (KUKA Options): - SafeOperation: Safe limitation of the work area - mxAutomation: Easy integration with external PLC controllers - Profinet ProfiSafe Device: Communication using an industrial standard Csdpfey Uz Hujx Adrjrh - RemoteSupportView: Remote diagnostic access - BoardPackage and DiagnoseSafety Key information: - Operating hours: 550 h (almost like new condition) - Technical condition: Functional, tested. - Logistics: The set is secured and strapped onto pallets – ready for immediate transport.

Condition: new, Year of construction: 2026, functionality: fully functional, Automatic carton sealing machine with label printing | 220V | NEW Description For sale is a new automatic carton sealing and labeling machine for professional use in shipping, logistics, e-commerce, fulfillment, and production. The system combines automatic carton sealing with adhesive tape with an integrated real-time label printing system. This allows cartons to be sealed and then labeled with individually generated labels within a single process. According to the manufacturer, the integrated thermal printing system supports barcodes, dates, logos, and other variable label information. Ideal for companies with regular package and carton shipping, as well as for integration into existing packaging and conveyor systems. Technical data according to the manufacturer: Capacity: approx. 800–1,000 cartons/hour Carton length: from 130 mm Carton width: 80–300 mm Carton height: 90–400 mm Adhesive tape width: 30–50 mm Power supply: AC 220 V / 50 Hz Power consumption: 1.83 kW Machine dimensions: approx. 2,400 × 800 × 1,680 mm Machine weight: approx. 180 kg Operating temperature: –10 °C to +50 °C Features / Functions Automatic carton sealing Sealing of top and bottom Integrated labeling system Real-time label printing Crjdpozwch Njfx Adreh Support for barcodes, date, logos, and other information Touchscreen operation Adjustable parameters Status and error display Roller conveyor technology Suitable for different carton sizes Suitable for integration into automated packaging processes Typical applications Mail-order business, e-commerce, fulfillment centers, warehouses and logistics, production facilities, packaging companies, and industrial end-of-line packaging. The machine is particularly suitable for companies that want to automate carton sealing and labeling in a single process. Condition: New Scope of supply and delivery time: upon request. If you are interested or have technical questions, please send us a message. We will also be happy to assist you with the planning of other packaging machines and automation solutions. Note: Technical specifications are based on the manufacturer's documents. Images may show optional equipment. Subject to technical changes and errors.

Condition: new, Stromab Matrix F Automatic Fully Programmable Cross Cutting & Notching Machine A heavy duty optimising upstroke crosscut and notching machine, designed for programmable and repetitive cutting and notching from standard and / or random lengths of timber. The saw unit has a pneumatic upstroke action with variable speed control, The notching unit is independent of the saw and therefore allows for programming of the saw or notching either as separate program's or as one single job. The pusher / feed is fitted with a heavy duty rack and pinion drive feeding system for fast positioning giving a high level of repeat cutting accuracy. The saw unit and clamping area is totally enclosed by a clear hinged electrically interlocked hood that while giving the operator a clear view of the cutting area still gives complete protection. The infeed and outfeed tables are of all steel construction meaning even heavy sections or packs of timber can be processed. For additional operator safety the rear of the pusher system is guarded, while there is a full length safety pull cord on the front infeed table. Programming and entering of cutting lists is very simple through a colour touch screen controller with graphic representation of the cut pieces. The machine offers full optimisation and also has the added optional facilities of defect cutting and remote programming from PC or laptop with transfer vis USB key or network. Additional options also include - extended outfeed table and label printing. To date we have supplied over 250 Matrix saws in to the UK, with a number of customers installing several machines. Saw unit Self braking saw motor 10hp Saw blade diameter 500mm Max cutting width 360mm ( refer to chart ) Max cutting height 135mm ( refer to chart ) Dust extraction 4 x 100mm diameter Milling Unit Self braking milling motor 5.5hp Pneumatic milling stroke with adjustable speed Max milling stroke 400mm Max milling width 100mm Max milling depth 60mm Dust extraction 2 x 125mm and 2 x 100mm Push feed system 3000 to 13000mm Precision rack and pinion drive to pusher with magnetic reading tape giving a high level of repeat cutting accuracy. Pneumatic rising of the pusher at the end of cutting cycle Piece length reading photocell Positioning speed 100m/min Positioning accuracy + /- 0.4mm Touch screen control unit Remote programming of cutting list via colour graphic touch screen controller - connection via USB key. - 6 optimising criteria - longest size, minimum waste, sequence, priority size, by volume or by value. Crsdpfx Asdy Hrdedreh - 1000 cutting lists - 10,000 lines per list. - Cutting list entered via controller key pad or via remote PC using PC or cable - Graphic description of the workpiece.

Condition: used, maximum load weight: 25,280 kg, overall weight: 31,000 kg, axle configuration: 3 axles, first registration: 04/2014, loading space length: 6,600 mm, loading space width: 2,400 mm, loading space height: 1,400 mm, loading space volume: 20 m³, Year of construction: 2014, Equipment: ABS, Stock No. 5707 Approx. 20 m³ Meiller compact tipping semi-trailer with hydraulic tilting gate / paving machine brake ----* Manufacturer: Meiller * Type: MHPS 42/2 * First registration: 04/2014 * Gross vehicle weight: 31,000 kg * Unladen weight according to vehicle registration document: 5,720 kg * Payload: 25,280 kg * Axles: 2 x BPW with 1st axle as lift axle / drum brakes * Suspension: Air suspension * Tires: 425/65 R 22.5 approx. 50% on steel rims * Color: Chassis black, tipping body grey, tarpaulin grey * EBS Wabco * Volume: approx. 20 m³ (6.60 m long x 2.40 m wide x 1.40 m high) * Hydraulically operated tilting gate with additional locking mechanisms * Roll tarp with tensioning straps * Operating platform at the front with access on the left * Full-load supports (aluminum prop supports) * Saddle height loaded 1.27 m Cedpfxox S T Ncj Adrerh * Paving machine brake * Individual fenders * LED reversing lights * Foldable underrun protection * Approx. 4.00 m aluminum extension ladder on the right German trailer!! German documents!! Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, isolated errors may have crept into the text or the information provided. We assume no liability for errors, changes or interim sales. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: used, maximum load weight: 29,380 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 09/2002, loading space length: 9,900 mm, loading space width: 2,430 mm, loading space height: 2,000 mm, loading space volume: 48 m³, Year of construction: 2002, Equipment: ABS, Stock no. 5792 Approx. 48m³ Benalu tipping semi-trailer with combination door / entirely made of aluminum / hydraulic cylinder leaking! ----* Manufacturer: Benalu * Type: SYY3WB * First registration: 09/2002 * Gross vehicle weight: 35,000 kg * Unladen weight according to vehicle registration document: 5,620 kg * Payload: 29,380 kg * Axles: 3x BPW / disc brakes * Suspension: Air suspension with lifting and lowering function * Tires: 385/65 R 22.5 on steel rims * EBS Wabco * Color: Chassis and tipping body aluminum, natural, tarpaulin gray Csdpfx Adjzdm Tcsrerh * Volume: approx. 48m³ (9.90m long x 2.43m wide x 2.00m high) * Combination door (hinged door and swing door) * 2 x grain discharge chutes * Roller tarpaulin with tensioning straps * Operating platform at the front with access ladder on the left * Tensioning bar construction * Individual fenders * Full-load supports * LED reversing lights * Shovel and broom holder * Foldable underrun protection Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, individual errors may have crept into the text or the information provided. We assume no liability for errors, changes, or interim sales. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: new, maximum load weight: 32,155 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile crossmembers. Designed for high point loads. Fifth Wheel: * Fifth wheel plate with 2-inch King Pin. Rear Underrun Protection: * According to EC standards, bolted design. Side Underrun Protection: * According to EC standards. Landing Gears: * 2x 12 t landing gears with leveling foot and one-sided operation on the right side in the direction of travel. Axles: * 3x 9 t air suspension axle, manufacturer SAF, with disc brake approx. 430 x 45 mm, wheel mounting center-mounted ET120, ABS, total travel of the air suspension approx. 180 mm, including lifting approx. 110 mm and lowering approx. 70 mm. * Control of the air suspension via hand control with stop function. Steering: * Last axle mechanically forced steering. Axle Lift: * First axle liftable, with fully automatic, load-dependent lift control. Braking System: * Two-line compressed air braking system according to EC standards with EBS and RSS, automatic load-dependent regulation, spring brake cylinders as parking brake, fail-safe coupling heads permanently mounted on the front crossmember, without connection line to the tractor. * Manufacturer: Wabco. Tires: Cjdpfoy Auhzjx Adrjrh * 6, 385/65 R22.5 160J on rim 11.75 X 22,5 ET 120 - manufacturer of our choice. Including tire pressure monitoring system, tire pressure display in the driver's cab (pre-installation by the tractor manufacturer). Fenders: * According to EC standards, 1/4 PVC fenders in front of and behind the axle. Load Securing: * 9 pairs of folding lashing rings, evenly distributed (tensile force approx. 8.0 t). * 8 pairs of folding lashing rings, evenly distributed (tensile force approx. 2.5 t). * In the outer frame, a hole for lashing straps is provided every approx. 500 mm (lashing straps can be hooked into the closed side walls, beveled outer frame). Stake Pockets: * 10 pairs of stake pockets in the outer frame, evenly distributed. * 4 rows of stake pockets transverse to the loading area. * Stakable stakes: 20 stakes made of galvanized tube approx. 80/50 mm, total length approx. 1,000 mm. * Inside on the front wall, magazine for 20 stakable stakes. Front Wall: * Reinforced steel construction, fixed, inside covered with approx. 9 mm screen-printed floor (approx. 1,250 mm high). Floor: * Approx. 28 mm Z-hardwood floor embedded in the outer frame. Side Walls: * 4 x 25 mm side walls and rear wall made of extruded aluminum profiles, foldable and removable, removable Kinnegrip stakes. * Side wall and stake magazine: under the chassis. * Left and right insertion rails for side walls and stakes. Lighting System: * According to EC standards, 24 volts with multi-chamber lights, LED side marker lights, LED position lights white at the front, LED outline lights at the rear, license plate lights. * 1x 15-pin and 2x 7-pin connector on the front crossmember. Equipment: * Chock with holder, two units. * Warning signs according to ECE 70. * Work lights on the lamp carrier (switched on via reverse gear). * Holder for rotating beacon on the rear, incl. rotating beacon. * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm. Paint Finish: * Chassis and front wall sandblasted, primed and single-color top coated. * Chassis: hot-dip galvanized + R

Condition: new, Year of construction: 2017, operating hours: 1,640 h, functionality: fully functional, Horizontal baling press Presto CC 40 M, year of manufacture 2017, semi-automatic Technical data: Manufacturer: Presto Type: CC 40 M Year of manufacture: 2017 Operating hours: 1640 Pressing force: 40 t Cycle time: 34 s Drive power: 15 kW Feed opening: 1080 x 1100 mm Feed volume: 0.85 m³ Tying: 4-strand, polyester strapping, manual Throughput at a bulk density of: 35 kg/m³ - 1.8 t/h 60 kg/m³ - 2.5 t/h 100 kg/m³ - 3.1 t/h Bale dimensions: 750 x 1100 mm Bale weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (L x W x H) Machine weight: approx. 3800 kg Materials: Paper, cardboard, film The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. The operating manual and CE declaration are available. Codpfjz A T Uzjx Adrjrh Note: Channel outlet with fully automatic control. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, prior sale is reserved, and can be withdrawn at any time. Inspections are possible by appointment. The sale is made against prepayment, ex works, without any warranty.

Condition: used, Year of construction: 2012, functionality: fully functional, Strautmann baling press, type BaleTainer, pressing force 60 t, year of manufacture 2012 Technical data: Manufacturer: Strautmann Umwelttechnik Type: BaleTainer Year of manufacture: 2012 Pressing force 60 t Total connection power 30 kW Bale dimensions 1,100 x 1,100 x 800 mm (W x D x H), 3 straps Bale weight up to 400 kg (3 straps) Binding: 4-way vertical Dimensions: 5,348 x 2,113 x 2,752 mm (L x W x H) Weight approx. 7,280 kg Materials: Paper, cardboard, PET bottles, film Note: The press is in good working order and has been inspected and tested. A video can be found on our website or YouTube channel. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is non-binding, subject to prior sale and may be withdrawn at any time. Crsdpez A T U Usfx Adroh Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: used, mileage: 35,400 km, power: 140 kW (190.35 HP), color: white, gearing type: mechanical, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure you receive the best possible advice, we kindly request that you schedule an appointment. Mr. Kiel will be happy to assist you; Tel: A50 front axle with increased load capacity, AR3 axle ratio i = 4.182, C6L multi-function steering wheel, CB7 stability level I, CL1 steering wheel adjustable in inclination and height, CW2 deletion of vehicle lowering, D03 high roof, D50 solid partition, E07 hill start assist, E1D digital radio (DAB), E1E navigation, E2N control for PRO features in NTG6, E3M MBUX multimedia system with 7-inch touchscreen, E43 trailer socket 13-pin, ED4 fleece battery 12 V 92 Ah, ES0 jump start assistance Contact, F64 exterior mirrors electrically foldable, F68 exterior mirrors heated and electrically adjustable, FF5 storage compartment above the windshield, FG8 cup holders in the front, FJ4 storage compartment under the cockpit, GD9 6-speed manual transmission ECO Gear 480, H15 seat heating for passenger, H16 seat heating for driver, H20 heat-insulating glass all around, HH9 semi-automatic climate control system TEMPMATIC, IL5 left-hand drive, IR6 wheelbase 4325 mm, overhang 1615 mm, IT4 3.5-ton vehicle, J10 speedometer km/h, J55 seat belt warning system for passenger seat, J58 seat belt warning system for driver seat, J65 outside temperature display, JA7 blind spot assist, JA8 crosswind assist, JB7 parking package with reversing camera, JG0 shift point indicator, JH3 communication module (LTE) for digital services, JI7 start-up mileage, maintenance interval 60,000 km, KB7 main tank 93 liters, L65 ceiling light(s) LD-/FG-compartment with door contact, L94 deletion of parking light, LA2 driving light assistant, LB1 lateral marker lights, LB5 3rd brake light, LC2 LED light strip in the cargo area, LE1 adaptive brake light, LG7 LED High Performance headlights, MP6 engine version Euro VI, MR0 emission class E (for heavy commercial vehicles), MU6 OM 654 DE 20 LA 140 kW (190 hp) 3800/min, P2L cargo area package 2, P2M parking assist package, Q10 crossmember for trailer coupling, Q11 longitudinal member reinforcement, QA5 vehicle preparation for AH load up to 2800 kg, R65 spare wheel holder under frame end, RH2 tires 235/65 R16 C, RS3 steel rims 6.5 J x 16, S02 driver's seat, S04 passenger seat adjustable, S22 armrest for driver's seat, S25 armrest for passenger seat, SA5 airbag driver, SA6 airbag passenger, SK2 seat occupancy detection driver's seat, T16 sliding door right, T75 grab handles for driver and passenger entry, T77 grab handle for entry, sliding door to cargo area on partition, T85 entry handle on corner pillar rear left, T86 entry handle on corner pillar rear right, V3L all-weather floor mats, V42 lashing rails on side wall at railing strap, V43 wooden floor, V94 cable duct on side wall, V95 cable duct on rear portal, VA2 interior paneling cargo area up to roof height (wood), VF7 fabric Maturin black We will gladly provide you with an offer for the trade-in of your used vehicle. Should you wish to lease or finance your vehicle, we will be happy to provide you with an individual offer. Mr. Kiel will be happy to assist you. IMPORTANT: Inspection only by prior arrangement! All information without guarantee, errors and prior sale reserved! Images are for illustrative purposes only! Deviations from advertisements or other descriptions are possible, for example, due to errors, incorrect data, transmission errors! ESP, navigation system, particulate filter, new MOT, partition Cjdjzcub Tspfx Adrerh Engine displacement: 1,950 cc

Condition: new, maximum load weight: 45,250 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt of the equipment. Complete equipment details are available upon request. Chassis, gooseneck: Special steel frame made of high-strength fine-grained steels, electrically welded at the connection points, well-dimensioned outer frame. 4-axle arrangement. Wheel arches above the axles with spray mist suppression. All steel parts are sandblasted. Lateral impact protection made of anodized aluminum installed. Increased point load of approximately 30,000 kg over approximately 4,000 mm. Special design in the gooseneck area for maximum low-bed length in combination with AluLeg support legs instead of telescopic support winches, maximum rear swivel radius of the tractor unit approximately 2,100 mm. Special superstructure with rear beam widening: DINKEL – special superstructure. Self-supporting aluminum roof beam/profile approximately 120 x 100 mm, sliding cover with plastic flaps. Rear beams can be widened to approximately 4,200 mm (only for loading and unloading). Three sliding beams per side with rubber strap relief. Additional center beam locking mechanisms in the roof beam and parking position, using a pull cable and spring latch. DINKEL – lifting roof mechanically height-adjustable. Lifting roof height approximately 400 mm, operable on both or one side, without opening the opposite side and the doors. Additional height adjustment of approximately 480 mm in approximately 40 mm increments with height adjustment in the beams. Front overhang on the front wall for operation under a tarpaulin up to a total height of approximately 4,400 mm. Four rows of stackable approximately 150 mm aluminum slats on the sides, with 450 mm pockets at the bottom and 4 rows of single pockets above. In the upper bed, only 3 rows of insertable slats. Spacing between slats evenly distributed. Floor: Approximately 27 mm special water-resistant glued beech plywood, rough surface. Steel sheet in the wheel arch area. Forklift drivable according to DIN standard. Outer frame flush with the surface. Brakes: WABCO air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve). Spring-loaded brake cylinders as parking brake. Wabco Smart Board with odometer and unit load indicator. Includes WABCO tire pressure monitoring system. Axles: 4 x 10,000 kg SAF/Sauer with drum brakes in low-bed design. Air suspension with lifting and lowering device, total lift approximately 230 mm. Third and fourth axles as friction-jointed trailing axles with electrical and mechanical lock. Twin tires: 235/75 R 17.5, -16-ply. Manufacturer of our choice, including E-wheel holder. Without E-wheel. Lighting: according to EC standard including side lights in LED design. Position lights in LED design. 2 additional reversing lights. 2 work lights on the front wall inside, at the top. Painting: Chassis and superstructure in a single color in the RAL color of your choice. Center beams, axles coated with KTL (cathodic electrodeposition) in black. Corner beams in hot-dip galvanized design. Plastic parts in black. Hot-dip galvanized parts unpainted. Rims in factory silver. Special equipment included: - E-supply cable 15-pin - Air suspension in ECAS design, operated on the semi-trailer - Overwidth signage at the front and rear in zinc-plated, continuously telescopic design with attached boundary lights including so Codpfxez Dmn Re Adrsrh

Condition: new, maximum load weight: 15,825 kg, overall weight: 20,500 kg, axle configuration: 2 axles, loading space width: 2,480 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis * Steel welded construction made of welded longitudinal beams and pierced Z-shaped cross members * Narrow cross member spacing for high ground load, ramp storage * Between the longitudinal beams behind the axle assembly, below the loading area, two insertion pockets for one access ramp each * with locking plate in the head frame at the rear. Under-ride guard * according to EC Front kingpin * Kingpins with single-side operation * Rear support: Two adjustable drop-leg supports Axles * 2 x 10 t air suspension axle assembly * Manufacturer: SAF * Disc brakes approx. 370 x 45 mm * Wheel connection: 8-hole, center-mounted for twin tires, ABS * Total stroke of the air suspension approx. 310 mm, of which lifting approx. 250 mm and lowering approx. 60 mm * Control via hand lever with detent function. Tires * 8-ply, 265/55R 19.5 - Manufacturer: Goodyear * on steel rim 8.25 x 19.5. * Splash guard: made of PVC in front of and behind the axles according to EC Load securing * In the outer frame, a hole for lashing straps every approx. 150 mm, tensile force approx. 2.5 t (lashing straps can be attached when the side walls are closed, sloping outer frame) * 6 pairs of folding lashing rings, evenly distributed, tensile force approx. 8 t. * Recess pockets for stake pockets 80/50: 3 pairs of recess pockets in the outer frame, evenly distributed. Braking system * Compressed air braking system according to EC with EBS * Two spiral hoses as connection to the towing vehicle with coupling head red/yellow. * Spring brake on one axle. Floor * Approx. 28 mm Z-shaped hardwood floor embedded in the outer frame. Headboard * Removable from 25 mm side wall Lighting system Csdpfx Adsz Dmn Dersrh * Lighting system according to EC, 24 Volt * Multi-chamber rear lights * License plate lights * Side marker lights and position lights at the rear * Connection plate on the left on the drawbar including connection cable with 15-pole and 2 x 7-pole plugs. Paint finish * Chassis shot-blasted, cleaned and high-quality hot-dip galvanized according to the latest technology. * Superstructure parts cleaned, primed and hot-dip galvanized * Chassis: Hot-dip galvanized + RAL color of your choice * Side walls and side wall posts: RAL color of your choice * Under-ride guard: RAL 9010 pure white * Hubs: KTL black rims: RAL 9006 silver * Attachments: galvanized / KTL black * Contour marking: acc. to EC, yellow on the side and at the rear Incl. Accessories * Rear extension approx. 800 mm incl. under-ride guard * extendable loading platform, load capacity approx. 2 t, locking every approx. 200 mm * Mechanically adjustable fixed drawbar in length, 6 x approx. 100 mm * with screwed towing eye approx. 50 mm according to DIN 74053 * 4 rows of recess pockets transverse to the loading area, evenly distributed * 12 pieces of stake pockets made of galvanized tube, approx. 80/50/4 mm * approx. 1,000 mm long container locks for 1x20? container, extendable to approx. 2,820 mm, according to ISO 1496, EN 284 or EN 452 * 1 pair of aluminum access ramps * Load capacity per pair approx. 9,000 kg * 4 x stainless steel tool boxes between or behind the axles, 6 x 25 mm * Side walls and rear wall made of extruded aluminum hollow profiles, approx. 600 mm high, foldable and removable * removable Kinnegrip stakes

Condition: used, mileage: 179,000 km, power: 107 kW (145.48 HP), first registration: 01/2016, fuel type: diesel, overall weight: 5,200 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 2, loading space length: 5,200 mm, loading space width: 2,130 mm, loading space height: 2,050 mm, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Special equipment: Trailer socket preparation, Audio system: radio with CD player, MP3 compatible, USB and Bluetooth hands-free system, Body manufacturer interface, Exterior mirrors electrically adjustable and heated, Long exterior mirrors, for vehicle width 2350 mm, Generator 180 A, Fire extinguisher bracket, Fuel tank: 90 liters, Acoustic reversing warning (external warning system), Seats in the cab: passenger single seat, Seats in the cab: driver's comfort seat (hydraulic), Additional equipment: Driver's side airbag, Anti-slip regulation (ASR), Design: C-series, Brake assist, Electronic brake force distribution, Digital tachograph, Rear axle suspension: trapezoidal, Windshield and side windows tinted, Body/superstructure: sales body, Headlight range adjustment, Engine 3.0 L - 107 kW Diesel, Radio preparation with speakers, Wheelbase 4350 mm, Spare wheel in driving condition, Spare wheel holder between floor longitudinal member, Low emissions according to Euro 5 emission standard, Permissible total weight 5.20 t, payload 925 KG 1 SIPHON UNDER RESERVE AND 2 UNDER THE display case // LIFTING STRAP LONG 4640 MM ? WIDTH 1090 MM SUPPORTED BY GAS SPRING AND ELECTRO-CYLINDER + LONG FOLDING STRAP .4640 MM - WIDTH 300 MM // COUNTER LENGTH 1700 OF THE DISPLAY CASES // COOLING GLASS COLUMN LENGTH 1000 X WIDTH 900 MM POWERED BY THE GROUP AND FAN // 1/2 HP COMPRESSOR HOUSED IN THE CELL // EUTECTIC PLATES 1 GREEN BLOCK IN THE COOLING COLUMN // EUTECTIC PLATE 1 GREEN BLOCK IN THE HIGH RESERVE 2 IN L IN THE COOLING DISPLAY CASE 1 BLOCK IN THE LOWER RESERVE // AUTOMATIC DEFROSTING + TIMER // TEMPERATURE DISPLAY Quantity: 3 FOR DISPLAY, LOW AND HIGH RESERVE // 220-V CONNECTION FOR THE SCALE // 24-V SOCKET FOR THE SLICER //12V/24V CONVERTER //BATTERIES LITHIUM BATTERY PACK WITH CHARGER //12V/220V PURE SINE CONVERTER Csdpfxsz D Hcuj Adrorh The vehicle is in good condition!! MOT and emissions test renewed for an extra charge Financing possible via Santander Bank

Condition: used, mileage: 29,618 km, power: 100 kW (135.96 HP), first registration: 02/2024, fuel type: diesel, overall weight: 2,825 kg, color: grey, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,050 mm, total width: 2,032 mm, total height: 1,994 mm, loading space length: 2,602 mm, loading space width: 1,705 mm, loading space height: 1,394 mm, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Errors and prior sale excepted! Internal number: 0926. RB03574 ----EQUIPMENT * Trailer coupling, fixed * Exterior mirrors, electrically adjustable, heated and folding - with integrated turn signals * Roof rack - integrated and foldable - max. roof load: 100 kg * LED headlights - LED high beam - LED low beam - LED daytime running lights incl. integrated LED turn signals at the front - Cornering lights, static - High beam assistant * Paint: Metallic * Cargo area floor: Vinyl floor covering "Easy Clean" * Charging station, inductive, for mobile devices - according to Qi standard, compatibility depends on the device * Load securing package - Airline rails on the side walls on the right and left, in the middle position, for load securing and 8 lashing eyelets, incl. load securing box with ratchet straps and hooks. * Radio: Ford audio system with 13-inch multifunction display and Ford SYNC 4 incl. navigation - Digital radio reception DAB/DAB+ (Digital Audio Broadcasting) - 13-inch TFT multifunction display - Integrated control panel and audio remote control on the steering wheel - Ford SYNC 4 with AppLink and touchscreen - AppLink - Amazon Alexa Built-in voice assistant * Side wall paneling, half-height * 2-stage release for passenger compartment and cargo area (rear door flaps or rear swing door) - Prevents locking of open doors * Anti-lock braking system with electronic brake-force distribution (EBD) * Airbag, driver side * Exterior mirrors, electrically adjustable and heated Codpfxez Exd Tj Adrjrh * Exterior mirror housings made of plastic, dark gray * Battery: H7 AGM single battery * On-board computer with consumption and mileage information (e.g. remaining range) as well as outside temperature display * Roof, flat * Roof console * Double-wing rear door with 180° opening angle (without window) * Tachometer * Third brake light * Electronic Stability Program (ESP) - Hill start assist - Emergency Brake Assist (EBA) - Traction control (TCS) * Power windows, front, electric - with quick-down/up function for driver's side * Parking brake, electronic * FordPass Connect - incl. live traffic information and 5G WLAN hotspot - Information about the current status or location of the vehicle and control of selected vehicle functions via the smartphone with the FordPass app - Real-time traffic information (in conjunction with the navigation system) - WLAN hotspot (up to 5G/LTE, for up to 10 mobile devices) - More information about FordPass Connect can be found at / * Windshield, heated * Transmission: 8-speed automatic * Grab handle, driver and front passenger side * Glove box with lockable lid * Interior lighting in the front with delay function * Automatic climate control in the front - with recirculation heating - with R-1234yf refrigerant * Headrests, front (3) * Fuel tank 55 l * Cargo area lighting (LED) * Steering wheel: Steering wheel made of plastic * Center console, small * Emergency call assistant eCall - Emergency call system to send an emergency call in the event of an accident or manual activation * Technology package 2 (Trend) - Ford audio system with 13-inch multifunction display and Ford SYNC 4 - Pre-Collision Assist, camera-based - Driver drowsiness warning - Traffic sign recognition system - Wrong-way driver warning function - Lane keeping assist incl. lane departure warning - Park pilot system, front and rear - Cruise control - Intelligent speed limiter with speed limit display - Rear view camera * Particulate filter: Diesel particulate

Condition: used, mileage: 156,025 km, power: 110 kW (149.56 HP), first registration: 05/2021, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 05/2027, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Vehicle number (for inquiries): 134 MERCEDES-BENZ SPRINTER 315 HIGH + LONG Paint code: * 9147 Paint color Arctic White MB 9147 Interior: * VF7 Fabric Maturin black Equipment: * 212L Berlin * 9147 Paint color Arctic White MB 9147 * AI1 Control code rear axle ring gear 215 * AR2 Axle ratio I = 3.923 * BH1 Hold function * BH8 Control code hydraulic aggregate variant 7 * BK1 Control code wheel brake configuration 1 * C6L Multifunction steering wheel * C907 - * CB8 Stabilization level II * CL1 Steering wheel adjustable in inclination and height * CW2 Omission of vehicle lowering * D03 High roof * D50 Fixed partition * E07 Hill start assist * E1D Digital radio (DAB) * E1E Navigation * E1G Live Traffic capability * E1U USB socket 5 V * E2N Control of Pro features in NTG6 * E3M MBUX multimedia system with 7-inch touchscreen * ED4 Fleece battery 12 V 92 Ah * EE5 Ultracap - locking automatic transmission * ES0 Jump start contact * EY5 Mercedes-Benz emergency call system * EY6 Breakdown management * F68 Exterior mirrors heated and electrically adjustable * F907 - * FF4 Storage compartment above roof liner * FF5 Storage compartment above windshield * FJ4 Storage compartment under dashboard * FKA Box van * FY7 Multi-button remote control * G43 9G-Tronic * H20 Heat-insulating glass all around * HH9 Semi-automatic controlled air conditioning system Tempmatic * HI1 Climate zone 1 (cold/comfort) * IC1 Model series C907/C910 Sprinter * IE0 Model series C907 VS30 Rwd * IG4 Standard * IG5 Basic * IH6 Head unit ECE/ROW * IK0 Complete vehicle * IL1 Domestic (Germany) * IL5 Left-hand drive * IR4 Wheelbase 3665 mm (BM-defining code) * IT4 3.5-tonner * J10 Speedometer km/h * J58 Seatbelt warning system for driver's seat * J65 Outside temperature display * JA8 Crosswind assist * JB7 Parking package with reversing camera * JH3 Communication module (LTE) for digital services * JI7 Start-up mileage maintenance interval 60000 km * K13 Main tank 71 liters * KP7 Exhaust gas purification SCR generation 4 * L Left-hand drive * L65 Dome light in loading/passenger compartment with door contact * L94 Omission of parking light * LA2 Driving light assistant * LB1 Side marker lights * LB5 3rd brake light * LC2 LED light strip in loading area * LE1 Adaptive brake light * LX5 Europe * M40 Generator 14V/200A * MJ8 ECO start-stop function * MT2 Emission class Euro 6D-TEMP N1 * MU3 Engine OM654 DE 20 LA 110 kW (150 hp) * Q11 Longitudinal member reinforcement * Q67 Towing eye rear * R65 Spare wheel holder under frame end * R87 Spare wheel * RF1 Tire manufacturer Continental (10) * RH2 Tires 235/65 R16 C * RM0 All-season tires * RS3 Steel rims 6.5 J x 16 * S22 Armrest for driver's seat, ISO-fix (child seat attachment system) * S25 Armrest for passenger seat, center armrest at the rear (FFO) * S87 Driver's seat console, low * SA5 Airbag driver * SB2 Passenger seat comfort * SB3 Driver's seat sprung seat Credpfez Exu Sjx Adrsh * SK2 Seat occupancy recognition driver's seat * T16 Sliding door right * T77 Grab handle at the entrance of the loading area sliding door on partition * T86 Grab handle on rear corner pillar right * V42 Tie-down rails side wall on bulwark strap * V43 Wooden floor * V94 Cable duct on side wall * V95 Cable duct on rear portal * VA2 Interior lining loading area up to roof height (wood)

Condition: used, mileage: 50,000 km, power: 120 kW (163.15 HP), first registration: 08/2023, fuel type: diesel, overall weight: 2,800 kg, wheelbase: 3,200 mm, next inspection (TÜV): 09/2028, color: white, emission class: euro6, number of seats: 3, loading space volume: 5.5 m³, loading space length: 2,510 mm, loading space width: 1,660 mm, loading space height: 1,320 mm, construction height: 1,915 mm, working width: 1,928 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, sliding door, soot filter, traction control, Air conditioning system (Tempmatik), 3-button remote control for central locking, exterior mirrors electrically adjustable and heated - both sides, electric windows, 2-way, multifunction steering wheel including trip computer, hill start assist, Attention Assist (drowsiness detection system), speed limiter (cruise control), speed limiter 210 km/h, reversing camera, solid bulkhead, spare wheel with road tires, all-season tires, light and rain sensor, daytime running lights, fog lights, audio navigation system Audio 40 (DAB+ - Bluetooth - USB), hands-free system, USB interface, Mercedes-Benz emergency call system, heat-insulating glass, tachometer, driver airbag, driver and passenger airbags, anti-lock braking system (ABS), electronic stability program (ESP), comfort seats, center armrest, driver comfort seat with armrest and lumbar support, start/stop system, particulate filter, service booklet maintained, sliding door for cargo/passenger compartment on the right, immobilizer, outside temperature display, power steering, paint: ARCTIC WHITE, wooden cargo floor with interior paneling, tie-down rails in the cargo area - side wall on the frame strap, load anchoring/tie-down points, DAB tuner (digital radio reception), two-way speakers at the front, passenger seat as a double seat, comfort lighting in the passenger/cargo area, BlueEfficiency package, permissible gross weight 2.8 t, exterior mirrors aspherical - both sides, mounting rails for roof rack, automatic activation for headlights, adaptive brake light, windshield with antenna, communication module (LTE) for digital services, maintenance interval display Assyst, instrument cluster with pixel-matrix display, lockable glove compartment, window pillar trim, central locking with remote control, seat belt system with warning system (driver/passenger side), seat belt system with warning system (driver side), seat belt system with warning system (passenger side), seat belt pretensioners, ceiling light in the cargo area, cup holders at the front, brake assist, breakdown management, steering wheel (steering column mechanically adjustable), crosswind assist, fleece battery 92 Ah, generator 250 A, fuel tank: main tank 57 liters, Pro, design and equipment line PRO, body/superstructure: long wheelbase, wheelbase 3200 mm, drive type: rear-wheel drive, transmission 6-speed - TSG (Eco Gear), over 150 vans and buses in stock. Financing or leasing possible via Santander Consumer Bank, Targo Bank or Auto Europa Bank, we will gladly advise you. This offer is non-binding, no guarantee for equipment details. Listed features may need to be checked separately. Changes, errors and prior sale reserved. Delivery possible for an extra charge. Export license plates available here. Trade-in of your old vehicle. Retrofitting of: - trailer couplings, up to 3500 kg possible - auxiliary heaters - screen for reversing camera and/or navigation via mobile phone (Android Auto) - reversing system with rear-view camera - workshop equipment - cruise control - retrofitting of a tail lift and other individual solutions for your business needs possible for an extra charge. Csdpfjzwdy Hjx Adrorh

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,200 kg, maximum load weight: 8,600 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 7,300 mm, loading space width: 2,480 mm, total length: 9,490 mm, total width: 2,550 mm, total height: 3,900 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Year of construction: 2026, Equipment: tail-lift, - Bespoke transport solution - Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and specification are carried out individually to customer requirements. #Chassis, centre-axle trailer - Outer frame, slightly angled, new design with "Load-Lock-Profil" for lashing strap attachment - 2-speed landing leg, front - Plastic toolbox - Platform height 1080 mm - Drawbar coupling, centre-axle trailer - Drawbar with tested 40 mm drawbar eye, haulage version - Drawbar mechanically height-adjustable via threaded spindle, below floor level, max. adjustment range 200 mm - Drawbar mechanically length-adjustable from approx. 1950-2300 mm, lockable in approx. 50 mm increments, drawbar length set to approx. 2100 mm #Axles + suspension - SAF/BPW axles, manufacturer's choice - Axles/running gear laser-aligned, reducing tyre wear and fuel consumption - Air suspension #Braking system - 2-line air braking system - Spring-loaded parking brake - Duomatic coupling head, front, with connecting line to the towing vehicle - 24-volt EBS, electronic braking system with EBS connector, front, with connecting cable - With lifting & lowering valve - Vehicle driving stability system #Wheels and tyres - 4x 235/75 R17.5, manufacturer's choice - 4x steel rims, factory silver #Electrics - 24-volt multi-chamber lights, yellow LED lighting on the sides - 2 white position lights, front - 2 white/red outline marker lights, rear - 1x 15-pin plug, front, with connecting cable #Floor - Screen-printed plywood flooring, approx. 30 mm thick, for high point load capacity - Platform length approx. 7,300 mm #Front wall / front corner posts - Pass-through loading system with front barn doors, 2-leaf, each with 2 internal rod locks, steel corner posts, release mechanism for side curtain - Loading ramp flap, approx. 2,400 mm wide, split once, approx. 350 mm long, for resting on the tail lift, load capacity approx. 1,800 kg, incl. support for the tail lift (drawbar length then approx. 2100 mm; for a tail lift length of 1800 mm, the coupling set-back dimension from the truck must then be min. 20 to max. 240 mm). Note! Usable internal length is reduced by the loading ramp flap! - Side boards #Centre stanchions - 2 pairs of sliding stanchions, adjustable along the full length, with 4 insertion pockets each and a long pocket at the bottom - Insert slats - 5 rows of wooden insert slats (4 rows in combination with side boards) #Rear wall / rear corner posts - Rear corner posts, steel, up to the underside of the roof, tarpaulin attachment with round tube and tensioning ratchet - Rear barn doors, 2-leaf, each with 2 internal rod locks #Tarpaulin - Tarpaulin with welded-in horizontal and vertical straps - Tensioning buckles made of stainless steel - Customer lettering possible on side curtains and rear doors #Roof - Sliding roof cover, rear end bow lifts up, cover slides from rear to front, tarpaulin colour: white - Optimised rain strip at the rear, at the top of the end bow, above the doors #Country of registration / plates - Germany - With DEKRA inspection and certification (in accordance with §13 EC-FGV) - Fliegl manufacturer's certificate for body strength to EN 12642 XL - Prepared for single-line number plate holder - Reflective strips: white, continuous along the bottom of the side curtains and at the top corners - Reflective strips: red, all around the rear doors Cedpfx Aozcp E Tedrjrh - Bespoke transport solution

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,000 kg, maximum load weight: 32,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: original, Year of construction: 2026, *Save on Transport Costs! Up to three platform trailers can be delivered as a space-saving 3-unit stack. Simply assemble the front wall yourself after delivery and benefit from significantly reduced transport costs. *Customized Transport Solution Configure your Fliegl trailer to your exact requirements. The vehicle shown is an example. Production and equipment are tailored individually to customer specifications. #Chassis High-strength steel welded chassis Fifth wheel with replaceable 2" kingpin Angled outer frame with Load-Lock profile for easy strap attachment 24 t two-speed landing gear, single-side operation, semi-round feet with load compensation Approx. 1,930 mm rear swing clearance Rear access ladder Side door retainers 2 wheel chocks with holders Aluminium side underrun protection Galvanized rear underrun protection Quarter fenders in front of and behind axle assembly Anti-spray mud flaps (EC compliant) Rear impact protection 2 spare wheel carriers incl. mounting kit 1 spare wheel with steel rim Lockable plastic toolbox #Axles & Suspension BPW disc brake axles (430 mm) Crjdjzmtc Aepfx Adreh Laser-aligned axle and suspension system for reduced tyre wear and fuel consumption Air suspension Automatic lift axle with forced lowering and traction aid (activated by pressing the brake pedal 3 times) #Braking System Dual-line air brake system Colour-coded air lines for easier servicing Spring parking brake 2 interchangeable air couplings at front (without connecting lines) EBS electronic braking system with front EBS socket Raise/lower valve Vehicle Stability System (RSS) Suitable only for tractors equipped with ABS #Tyres 385/65 R22.5 tyres Steel rims, factory silver #Electrical System 24 V lighting system Multi-chamber rear lights LED side marker lights 2 white front position lights 2 red/white rear outline marker lights 2 × 7-pin front sockets (without connecting cables) #Loading Platform Approx. 30 mm phenolic plywood floor 8 longitudinal support beams Forklift axle load up to 7,900 kg Steel chequer plate reinforcement at rear #Front Wall Approx. 1,350 mm aluminium front wall Heavy-duty steel corner posts Front curtain release system Crash Blocker with integrated steel impact protection #Registration & Certificates German registration EC type approval (2007/46/EC) 24/7 service hotline Optional delivery as a secured 3-unit transport stack Fliegl body strength certificate according to EN 12642 XL ECE R70 rear warning plate

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,600 kg, maximum load weight: 24,400 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 5,900 mm, loading space width: 2,520 mm, loading space height: 860 mm, total length: 10,290 mm, total width: 2,550 mm, total height: 860 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, color: original, Year of construction: 2026, Tailor-made transport solution Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and specification are customised to customer requirements. #Low Loader Drawbar Trailer Chassis Welded steel construction Turntable with heavy-duty ball race Folding rear support legs 2 wheel chocks with holders Half-shell mudguards on 1st axle Quarter mudguards behind 2nd and 3rd axles Side underrun protection Yellow side LED lights instead of reflectors Full-width rear mudflap (not in combination with forklift mounting) 1 lockable plastic toolbox, W 600/H 425/D 460 mm #Lashing Points Low Loader 1 pair of recessed 10 t lashing cut-outs in front gooseneck side members 7 pairs of recessed 10 t lashing points in top and side outer frame 1 on front gooseneck 5 in low bed 1 in rear bevel 12 pairs of 5 t lashing holes in outer frame (for load straps) 5 on gooseneck, 6 in low bed and 1 in rear bevel #Drawbar Equipment Drawbar with certified 40 mm towing eye Spring-assisted drawbar height adjustment #Axles + Suspension Drum brake axles, manufacturer's choice "Achsen-/Fahrwerk laservermessen" reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushes and mechanical axle load equaliser #Wheels and Tyres 235/75 R17.5 Manufacturer's choice Twin steel wheels, factory silver #Braking System Twin-line air brake system Spring parking brake 2 non-interchangeable front coupling heads with connecting lines to towing vehicle Connecting lines extended by approx. 60 cm Without ABS, with mechanical ALB, max. 60 km/h approval #Electrical System 12 V multi-chamber lights with yellow side LED lights Flashing side LED lights linked to indicators 2 front white position lights 2 rear white/red outline marker lights 1 x 7-pin 12 V front plug with connecting cable, extended by approx. 60 cm Credpoznw U Esfx Adrsh 1 removable LED beacon with bracket, switched via side lights 2 pairs of illuminated warning boards, extendable to 3,000 mm #Floor Front gooseneck with steel chequer plate Recessed storage box in transition to gooseneck Approx. 70 mm softwood floor, steel chequer plate in wheel arch area Rear bevel with 70 mm softwood floor Low loader deck incl. rear bevel: 5,900 mm #Loading Ramps Steel ramps, 3,000 mm long, 750 mm wide, laterally adjustable Timber-covered (steel chequer plate at ramp tips) Hydraulic operation via PTO with flow control, left-hand side operation in direction of travel Hydraulic connection with SVK plug NW 10/3 incl. connecting hose #Paint Finish Chassis painted DB 7350 Nova Grey "10 Jahre Gewährleistung gegen Durchrostung" Drawbar galvanised or black, manufacturer's choice Loading ramps hot-dip galvanised

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT21801012535, empty load weight: 3,860 kg, maximum load weight: 14,140 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 08/2026, next inspection (TÜV): 06/2027, loading space length: 7,750 mm, loading space width: 2,480 mm, loading space height: 1,200 mm, total length: 9,925 mm, total width: 2,550 mm, total height: 3,150 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: silver, Year of construction: 2026, Demonstration vehicle - Please note: images shown are archive photos. The vehicle may currently be in use! #Chassis – centre-axle trailer Cjdezw Ep Nopfx Adrorh - Fine-grain steel welded construction - Outer frame slightly angled, new design, featuring a "Load Lock" profile for lashing strap attachment - 1 pair of geared landing legs front, semi-round base plate, shock-compensating foot, single-side operation, direction of travel right - 1 pair of geared landing legs rear, semi-round base plate, shock-compensating foot, single-side operation, direction of travel right - 2 wheel chocks with holder - Side impact protection, aluminium - Underrun protection, steel - Quarter-shell mudguards - 2 plastic tool boxes with drawer and insert shelf, w=650 / h=520 / d=670 mm, lockable with a padlock #Towing gear – centre-axle trailer - Drawbar with certified 50 mm towing eye, general haulage version - Lower coupling head on drawbar - Folding bracket with spring support on drawbar, guiding the connecting cables to the truck #Axles + suspension - SAF disc-brake axles, 430 mm disc diameter - "Axles/chassis laser-measured" reducing tyre wear and fuel consumption - Air suspension with lift & lower valve #Wheels and tyres - 385/65 R 22.5", manufacturer's choice - Steel rims, factory silver #Braking system - Two-line compressed-air braking system - Spring-loaded parking brake - Vehicle stability system - Duomatic connection front, with connecting line to towing vehicle, direction of travel right - EBS electronic braking system, EBS connector front with connecting cable #Electrics - 24V multi-chamber LED lights, yellow LED side marker lights, LED number plate light (note: false fault warnings possible with certain towing vehicles despite correct function) - 2 white position lights front - 2 white/red outline marker lights rear - 1x 15-pin plug front with connecting cable, direction of travel right - Reversing camera system, colour flat-screen monitor, wireless link, screen with suction-cup mount, powered via 24V vehicle socket #Floor - Phenolic-coated plywood, approx. 30 mm, high point-load capacity - Note: floor warping possible due to weather - "Premium floor sealing", sealed all round - Platform length approx. 7,750 mm #Front wall / front corner posts - 25 mm aluminium hollow-section, 1,950 mm high, corner posts steel, reinforced profile, +2 additional centre supports - Front wall internally lined with 1,250 mm high phenolic-coated plywood #Centre stakes - 2 pairs of folding stakes at side-board height, foldable and removable #Side boards - 25 mm aluminium hollow-section, 700 mm high, foldable and removable, without tarpaulin rail #Rear wall / rear corner posts - 1 pair of folding stakes at side-board height, foldable and removable - 25 mm aluminium hollow-section, 700 mm high, foldable and removable, with internal folding step #Country of registration / plates - Warning plate ECE-70 - Warning plate "A" for waste transport, foldable - ADR warning plate at rear, foldable #Paint finish - Frame hot-dip galvanised incl. passivation - "15-year warranty against corrosion perforation"

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902031812, empty load weight: 6,115 kg, maximum load weight: 28,885 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2023, next inspection (TÜV): 10/2026, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 40 %, ground clearance: 310 mm, color: red, Please note: the images are archive photos! The vehicle may currently be in use. #Chassis – haulage semi-trailer Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Slightly tapered outer frame, new design with "Load-Lock-Profil" for lashing strap attachment 24 t 2-speed landing legs, single-side operation, with half-round foot and straight mounting plate, with thrust compensation Pull-out ladder at the rear "D-Lock" door retainer for I-Lock closure 2 wheel chocks with holder Pallet box (capacity: 24 Euro-pallets) "Heavy Blocker" rear underrun protection, transverse + lateral roller-type impact buffer 1 plastic tool box, w=600 / h=425 / d=460 mm Storage compartment for 32 slat boards under the loading floor Pallet stop on both sides, approx. 15-20 mm high, bolted design #Axles & suspension BPW disc brake axles with 430 mm disc diameter Crsdpfx Aozxz R Sjdroh Laser-aligned axles/chassis – reduces tyre wear and fuel consumption Air suspension 1st axle automatic lift axle, additionally operable electrically from the truck, including forced lowering and pull-away aid #Braking system 2-line air braking system Colour-coded pipework for easy servicing Spring-loaded parking brake 2 anti-mismatch coupling heads at the front 24V EBS, electronic braking system with EBS socket at the front with lift & lower valve + auto-reset function Vehicle stability system #Wheels and tyres 385/65 R22.5" Polished aluminium rims, Alcoa Dura-Bright #Electrics 24V, LED multi-chamber lights, yellow LED side marker lights, number plate light 2 white LED front position lights 2 white/red LED outline marker lights at the rear 1 x 15-pin socket at the front LED work lights on both sides 2 additional LED work lights at the rear #Floor Plywood flooring approx. 30 mm thick, on longitudinal bearers for high point load capacity, for forklift axle loads up to max. 7100 kg Steel sheet covering fitted at the rear over approx. 300 mm Premium floor sealing – floor sealed all around #Front wall / front corner posts 2580 mm high, steel corner posts of box-section design, release mechanism for the side curtain at the front wall Crash-Blocker, steel impact protection on the lower inside, approx. 140 mm high #Centre posts 3 pairs of sliding posts, movable along the entire length 3 pairs of post positions #Slat boards Aluminium V-profile slat boards #Rear wall / rear corner posts Rear corner posts, steel, up to roof edge, curtain attachment with round tube and curtain tensioning ratchet Rear barn doors, 2-leaf Fliegl "I-Lock" integrated door lock, awarded the "iF Design Award" #Roof "Fliegl-Blitz-Verdeck" Sliding roof, rear end bow foldable, roof sheet slides from rear to front, L-shaped roof rail as used in the automotive industry Roof non-elastic, minimal deflection of the roof rail Anti-Ice System, with 1 central hose, automatic forced venting via the brake light Optimum rain gutter at the rear #Country of registration / plates Type approval per EC 2007/46 Fliegl manufacturer's certificate for body strength per EN 12642 XL Fliegl manufacturer's certificate for load securing per VDI 2700 sheet 12 ff. Warning board per ECE-70 Please note: archive photos!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,500 kg, maximum load weight: 33,500 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 12,660 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Year of construction: 2026, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis, semi-trailer, container Fine-grained steel welded construction, kingpin plate with 2 replaceable kingpins and 2 kingpin positions Container receptacles: 1 x 20 ft in the center without steel/non-slip flooring in the rear area Crsdji Riv Nepfx Adrsh 2 x 20 ft or 1 x 40 ft with gooseneck tunnel without height adjustment at the rear and without folding center supports, transport of containers without a tunnel is not possible. 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without stroke compensation 2 chock blocks with holder Aluminum side underrun protection Galvanized steel rear underrun protection Semi-elliptical fenders with anti-splash flaps according to EC Rear impact protection Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44 tons gross vehicle weight Air suspension Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by tractor units that guarantee the effectiveness of the ABS! with raise/lower valve Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal for display on the dashboard in the driver's cab; the truck must be appropriately prepared; no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, tail and brake lights in LED, yellow LED lighting on the sides (Note: with certain tractor units, false diagnoses may occur, even if the function is working) 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connection cable 2 additional LED work lights at the rear, switched via reversing light Operating instructions Note: Transport of filled tank containers is not permitted! Country of registration / signs Germany with DEKRA approval and certificate (according to §13 EC - FGV) prepared for single-row license plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau - 10-year guarantee against rust-through or hot-dip galvanized - 15-year guarantee against rust-through Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements.

Condition: used, Year of construction: 2015, Overview Traditional-method finishing line for cava, champagne and other sparkling wines, from riddling and neck freezing through disgorging, dosing, corking and wire hooding to capsuling, labelling and case sealing. The machines are rated between 1,800 and 2,500 bottles/h. Two stainless steel tanks complete the offer. The line is sold as a whole; the gyropalettes and the two tanks are also available separately. Technical data Csdpsz E U D Nsfx Adrorh - Product: sparkling wine, traditional method (cava, champagne) - Capacity: 1,800 to 2,500 bottles/h depending on the machine - Bottle formats: Bordeaux and Burgundy/cava - Years of manufacture: 1987 to 2018 - Electrical supply: 380-400 V, 50 Hz Scope of Delivery - Gyropalettes | ADRESSES INDUSTRIE | 504 S | for 504-bottle metal cages or 500-bottle packs, approx. 6,000 bottles per batch, control cabinet | 1998 - Balancer manipulator | DALMEC | PARTNER PMC | pneumatic, max. load 80 kg, bottle gripper head, unloads the cages into the neck freezer | 2005 - Neck freezer | TALLERES URPINAS | G+20 B | glycol/brine bath at -25 °C, touch panel, 2.28 kW, 380 V, 2,000 bottles/h | 2005 - Disgorging and dosing monobloc | PERRIER | crown cap removal, ice plug ejection, expedition liqueur dosing and levelling, approx. 50,000 bottles since the last general overhaul, original manual, 2,500 bottles/h | 1987 - Corker | AROL | GEMINI F | natural cork (mushroom) corking, single head | 2015 - Wire hooder | Robino & Galandrino | VITTORIA T 1/1 JUNIOR | monobloc with the corker, wire hood plaque feeder, inclined long-duration wire hood magazine, touch panel, 400 V, 50 Hz, original manual, 2,000 bottles/h; cork feeding and sorting hopper available as an option | 2015 - Bottle turner / homogeniser | FORNS | continuous, mixes the expedition liqueur into the wine, 2,500 bottles/h | 1987 - Washing, drying and blowing tunnel | CAMES | WDT-1 | exterior washing, high-speed Sonic air knives, 400 V, 50 Hz, 700 kg | 2018 - Capsule applicator | C.M.A.R. | capsule distributor with pleating and smoothing heads | 2001 - Labelling machine | PRIMA INDUSTRIES | PLM 1500 | self-adhesive, 3 label stations plus neck collar, capsule orientation with spot and UV sensors, SICK photocells, star wheels for 75 mm (Bordeaux) and 89 mm (Burgundy/cava) bottles, 3 kW, 400 V, 1,800 bottles/h | 2018 - Case sealer | SIAT | SK2-S | top and bottom adhesive tape sealing, 380 V, 3-phase | 2015 - Tank with agitator | DECALSA INDUSTRIAL | 12,200 L, agitator, heating and cooling coils, control box | 1988 - Tank | MAGUSA | DPG | 10,000 L, AISI 304 | 2000 Condition Used, still installed and in production. Regularly maintained; most machines have had one owner since new. Availability Available now. Inspection possible. Location: Spain.