Used Tracto-Technik Tube Bending Machines for sale (75,847)

Condition: new, Year of construction: 2026, machine/vehicle number: 302340, Profile Bending machine KB Türkei model MB 30 bottom shaft 30 mm Nwedpfx Aod S Uf Segrsl top shaft 35 mm two rollers driven with basement capacity: up to round tube 48 x 3,0 mm flat material 50x10 mm square tube 40x40x3,0 mm weight 170 kg motor 0,75 kw 400 Volt 50 Hz 3 ph.

Condition: used, Year of construction: 2004, sheet width 1550 mm plate thickness 6 mm Nodpfx Agozxt Txjrjwl diameter of upper rolls 228 mm drive elektronisch zwei angetri

Condition: new, Year of construction: 2026, number of rollers: 3, roller (bottom) diameter: 140 mm, roller (top) diameter: 140 mm, side roll diameter: 140 mm, sheet thickness steel (max.): 5 mm, Equipment: cone bending device, documentation/manual, hardened rollers, swiveling upper roller, - Capacity: 1270 x 5 mm - Electrically adjustable rear roller - Electrically adjustable lower roller (material clamping) - Digital display for rear roller movement - Digital display for lower roller movement (material clamping) - Hardened rollers Nwsdpfegg Rcxsx Agrel - Conical rollers - Pivoting upper roller - Brake motor - Emergency stop - Documentation - 400V

Condition: new, Year of construction: 2026, sheet width 3100 mm plate thickness 9 mm pre-bending 6 mm diameter of upper rolls 220 mm diameter of lower rolls 200 mm side roll diameter 170 mm min. dia. 250 mm roll speed 6 m/min total power requirement 10,3 kW weight of the machine ca. 4651 kg dimensions of the machine ca. 4915 x 1120 x 1235 mm Features - Machines include the following DAVI standard specification: The components of the machine structure (machine stand, frame and swivel bearings, etc.) have been calculated and designed to withstand the loads required for the applications and performance levels. The robust and heavy-duty machine construction absorbs the loads generated during the bending process without transferring them to the foundation. - High-quality surface finish: For forming delicate surfaces and/or soft materials without leaving marks Hydraulic-mechanical parallelism system, supported by electronics for fine-tuning. There are two INDEPENDENT & SYMMETRICAL hydraulic circuits for the left and right cylinders of each roller. The oil flow is regulated by two DOUBLE PUMPS, which are mounted on the same motor shaft and are fully synchronised. The two symmetrical hydraulic circuits move the cylinders and supply the rollers with the SAME amount of oil in a fully synchronised manner. Electronic control is activated only for extremely precise fine-tuning. - Smooth transmission of the drive Both the hydraulic motors and the gearboxes (top and bottom) can follow the deflection of the roll without load when bending narrow sheets. This ensures perfectly symmetrical deflection of the rolls under load. This system also allows the rollers to deflect freely, without the risk of breakage under excessive load. - ‘Roll-by-Wire’© digital technology Since 2004, DAVI has revolutionised the way sheet metal rollers are wired (similar to ‘fly-by-wire’ technology in the aerospace, FMS and automotive industries) and introduced ‘Roll-by-Wire’ technology. This allows the entire control system of the roller to be controlled via digital signals rather than, as was previously the case, via numerous relays and contacts. Digital technology is much faster and more reliable. Action Benefit Reduction in the number -> Reduction in potential of components component failures Very compact design -> Improved accessibility for maintenance work Improved accessibility for -> Damaged parts can be identified maintenance work more easily More reliable -> Greater accuracy thanks to the use of ‘digital signals’ Permanent lubrication technology The lever-arm feed system eliminates all linear friction during the movement of the side rollers, as the roller support arms, which house the bushings, rotate simply and smoothly around two large, strong pivot points made of alloy steel, ensuring precise and friction-free rotation. This guarantees reduced wear and safety during unlimited use. Further advantages of the lubrication-free lever-arm feed mechanism are: •NO daily maintenance required (lower operating costs). •More production time available. •The bearings are sealed to protect against scale, dust and rust Nwedpfxez Dxpms Agrjl - Hardened rollers •Excellent heat tre...

Condition: good (used), Year of construction: 1993, machine/vehicle number: 93212004, Offer 26084 Nsdpjy Em Dgsfx Agrswl Technical Data: - Maximum working width: 2040 mm - Maximum material thickness at 40 kg/mm² tensile strength: 4 mm - Bend angle adjustment: electronically pre-selectable, 0 - 135° - Automatic sequence control for a complete work cycle - Maximum upper beam opening/clamping stroke: 350 mm - Height adjustment: - Bending beam: 100 mm - Lower beam: 100 mm - Upper beam drive: 400 V / 4 kW - Bending beam drive: 400 V / 4 kW - Bending beam adjustment - Back gauge adjustable via handwheel - Electric foot switch - Space requirement with back gauge: approx. W 3200 x H 1650 x D 2100 mm - Weight approx.: 4500 kg

Condition: used, Technical details: sheet width: 1080 mm plate thickness: 1,25 mm distance between columns: 1200 mm dimensions LxWxH: 1,9 x 0,6 x 0,9 m weitere Merkmale: 2x Biegewalzen: -Ø 63 x 1080mm -die Oberwalze ist ausschwenkbar -die Unterwalze hat einen Verstellweg von 12mm -Antrieb manuell über Handkurbel 1x Laufwalze: -Ø 63 x 1080mm Nwsdeu Icdyopfx Agrol -mitlaufend -Verstellweg ca. 5mm *

Condition: as good as new (ex-display), Flat, upright / Ø: 60 x 10 mm / 500 mm Nwjdpfx Aspxmaujgrel Solid, square / Ø: 35 x 35 mm / 900 mm Tube, round / Ø: 70 x 2 mm / 1000 mm Shaft diameter: 50 mm Roll diameter: 138 mm bending speed: 4,5 / 9 m/min voltage: 400 V motor power: 0,6 / 0,9 kW dimensions WxDxH, approx.: 780 x 1040 x 1470 mm Weight, approx.: 360 kg Equipment: - Machine in stable welded steel construction - Roll drive via gearbox - Hardened rolls (standard roll set included) - Shafts hardened and ground - All switching and operating elements on mobile control panel with foot pedal for right/left rotation - Manuel adjustable straightening rolls - Can be used horizontally and vertically Options on request: - Hydraulic top roller infeed - Two-stage motor - Digital display - Brake motor for the production of precision sheets - Roll sets

Condition: excellent (used), functionality: fully functional, Gade Bending Machine 3100 X 25 Ton Mod. 30/25 Used Machine Nedpfx Agjwrrhwjrswl Internal Code: Svr 317

Condition: good (used), Year of construction: 1991, machine/vehicle number: 91212035, Offer 26016 Technical data: - max. working width 2040 mm - max. material thickness at 40 kg/mm² tensile strength 4 mm - bending angle adjustable electronically, preselectable 0 - 135° - automatic sequential control for a complete working process - largest opening width / stroke of the upper beam 350 mm - height adjustment: - of the upper beam 100 mm - of the lower beam 100 mm - upper beam drive 400 V / 4 kW - bending beam drive 400 V / 4 kW - accessories: - motorized bending beam adjustment - rear stop adjustable with handwheel - electric foot pedal Njdozgu Tispfx Agrowl - space requirement with rear stop: - approx. W 3200 x H 1650 x D 2100 mm - weight approx. 4500 kg

Condition: new, number of rollers: 3, shaft diameter: 50 mm, – Shaft diameter: 50 mm – Digital display Njdpsz Dquujfx Agrswl – Forward and reverse operation – Can be used horizontally and vertically – Foot pedal control – Emergency stop – Documentation – 400V

Condition: good (used), Three-roll bending machine, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll bending machine, profile bending machine, three-roll sheet metal rolling machine, manual bending machine -Manufacturer: Carl Kneusel, 3-roll bending machine, hand-operated -Max. sheet width: 1020 mm -Max. sheet thickness: mm -Roller diameter: 55 mm -Dimensions: 1670/580/H1150 mm Nodpfx Asz A S Srjgrowl -Weight: 156 kg

Condition: ready for operation (used), functionality: fully functional, Swivel bending machine, type 2000 x 2-3mm - Bending length 2000mm - Sheet metal thickness over the entire length 2-3mm - Bending process performed manually - Counterweight Dimensions: L x W x H 3 x 0.8 x 1.5 meters / Weight 1600 kg Nwedpfez Akc Esx Agrsl Subject to errors and omissions.

Condition: used, Roundo PS340 3000 mm Hydraulic Double-Pinch Plate Bending Rolls Manufacturer: Roundo AB Model: PS340 Year: 1983 Country of manufacture: Sweden Type: Hydraulic three-roll double-pinch plate bending rolls Capacity Maximum working length: 3,000 mm Pre-bending capacity: approximately 12 mm mild steel aximum rolling capacity: approximately 18–23 mm mild steel, depending upon finished diameter Standard upper-roll diameter: 340 mm Plate capacities based upon mild steel of approximately 270 N/mm² yield strength Minimum rolling diameter: approximately 1.1–1.4 times the upper-roll diameter, depending upon material thickness Remaining straight edge after pre-bending: approximately 1.5–2 times plate thickness Nwodpfxezuzpys Agrsl Features Hydraulic double-pinch design Both lower rolls independently hydraulically adjustable Pre-bending of both ends without removing and reversing the plate Hydraulic rotation of all three rolls Infinitely variable rolling speed Hydraulic powered drop end Portable pendant control Front safety trip bar Heavy-duty fabricated and stress-relieved frame Forged and crowned steel rolls Rolls mounted in heavy-duty roller bearings Suitable for cylindrical and conical bending Approximate machine weight: 14,000–15,000 kg, subject to confirmation Approximate main motor: 22 kW, subject to data-plate confirmation

Condition: used, Year of construction: 1990, machine/vehicle number: 98 / 1, Item No. 26247 Technical Data: - max. working width 2040 mm - max. material thickness at 40 kp/mm² tensile strength 3.5 mm - bending angle adjustment, electronically pre-selectable, 0 - 135° - smallest bending radius 1.25 x sheet thickness - smallest inner flange height 6 x sheet thickness - automatic sequential control for a complete work cycle - operation via hand or foot buttons - largest opening width / stroke of the upper beam 200 mm - height adjustment: - of the upper beam 80 mm - of the lower beam 80 mm - upper beam drive 400 V / 1.1 kW - bending beam drive 400 V / 1.5 kW - manual rear stop, operable from the front Nwedpfozzzhcox Agrel - various bending strips, split gooseneck tool (incomplete) - space requirement approx. W 3300 x H 1350 x D 1500 mm - weight approx. 2600 kg

Condition: new, Year of construction: 2026, - Capacity: 2070 x 6 mm - Electrically adjustable nip roller - Electrically adjustable bottom roller (material clamping) - Digital display for rear roller movement - Digital display for bottom roller movement (material clamping) - Hardened rollers - Tapered rollers Nodpfjlht N Iex Agrewl - Rotatable top roller - Central lubrication system - Brake motor - Emergency stop - Documentation - 400V

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 1050 mm plate thickness 2.0 mm roll length 1070 mm roll diam. toproll 75.0 mm engine output 1.5 kW weight 325 kg range L-W-H 1530 x 700 x 1160 mm Nwsdpexacbuefx Agrol Exhibition machine - like NEW not yet in use (!!) Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 1250 mm Nedpfx Agoxaafdsrjwl plate thickness 1.5 mm roll length 1270 mm roll diam. toproll 75.0 mm engine output 1.5 kW weight 400 kg range L-W-H 1730 x 700 x 1160 mm Exhibition machine - like NEW not yet in use (!!) Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device

Condition: as good as new (ex-display), Year of construction: 2022, sheet width 1070 mm plate thickness 4.0 mm pre-bending 3.0 mm roll length 1070 mm roll diam. toproll 110 mm bending speed 3.0 m/min engine output 2.2 kW weight 848 kg range L-W-H 2250 x 1000 x 1800 mm New price ~ 10.000 euros Exhibition machine - like NEW (!!) Nwsdpfx Ajxacdpegrol Equipment: - robust electro-mechanical round bending machine - 2x central rollers driven by electric motor (top & bottom roller) - right/left running of the rollers - top roller can be manually swiveled out, with folding bearing - manual delivery of the side roller - including conical bending device - asymmetrical roller arrangement - rollers with profile inlets - safety device (safety line with switch unit) - 1x freely movable control panel - operating instructions (ENG)

Condition: good (used), functionality: fully functional, BEYELER HYDRAULIC BENDING MACHINE 3000X100 TON. MOTORIZED REGISTER, 3 AXES. RECESS 250. DIMENSIONS: 350X160X245 cm (H), WEIGHT 6,500 KG (65 QL.) Nsdpfx Agsvxif Isrswl

Condition: new, number of rollers: 3, roller (bottom) diameter: 95 mm, roller (top) diameter: 95 mm, side roll diameter: 95 mm, roller length: 1,070 mm, sheet thickness steel (max.): 3 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, swiveling upper roller, - Capacity 1070 x 3 mm - Conical rollers Nedpfswhgm Tsx Agrewl - Pivoting top roller - Foot pedal control - Brake motor - Emergency stop - Documentation - 400V

Condition: ready for operation (used), Year of construction: 1992, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 3200 kg range L-W-H 4500 x 1500 x 1300 mm Features: Nodpfx Asxacdvjgrjwl - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: good (used), functionality: fully functional, Hydraulic tube end forming machine BLM (Italy) for tubes, up to 6 tools (5 follow-up tools) can be interchanged for forming Drive power: 7.5 kW Max. tube diameter: approx. 40 mm Nwsdpfxszzwpvo Agrel Max. forming length: 100 mm Weight: approx. 1.4 tons

Condition: new, Shaft diameter 40 mm 138 mm Upper shaft diameters 138 mm engine output 1,1 / 380 kW / V work speed 6 m/min weight of the machine ca. 230 kg required space 750 x 600 x 1400 mm The Gerd Wolff PK 40 is a pipe bending machine which is produced for our GERDWOLLF Maschinenfabrik" by a renowned manufacturer from Türkiye. Standard Accessories and technical details - Sheet metal frame - 2 bottom rolls are driven - Direct drive power - Upper roller is idle (free rotation) - Hardened rollers - Hardened shafts made of special steel material - Standard rollers - Adjustable guide rollers - Horizontal and vertical working position Nwedpeyn R Ugjfx Agrjl Optional equipment - Tube bending rollers - Profile bending rollers - Angle bending rollers - Digital readout - Optional lateral angle guides

Condition: used, Year of construction: 1986, sheet width 2040 mm plate thickness 6,0 mm distance between columns 2100 mm roll diam. toproll 180 mm roll diam. bottom roll 160 mm weight of the machine ca. 2,4 t dimensions of the machine ca. 3,5 x 0,85 x 1,75 mm Sheet metal bending machine with 3 rollers Nedpfez Ek Aujx Agrowl - 2 driven rollers - Emergency stop device

Condition: used, Engine and transmission for GRM 80 – according to the previous owner, the transmission was overhauled and has not been used since. Nwodpfx Aszw I Hqogrol ATTENTION!! This offer includes only the engine and transmission!