Used Trumpf Trumpf Trupunch1000 S05 for sale (487)

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, total height: 1,500 mm, total width: 900 mm, total length: 1,400 mm, overall weight: 850 kg, IDEAL BAS 052 Ref. 38326 Band Saw Blade Welding Machine • 2012 • ID: 38326 Hsdpfx Anez D Hyyoysu IDEAL BAS052 is a band saw blade welding machine with 25 kVA power and operates at 400-440 V. It features UNIOP control. Flash butt welding of band saw blades from a UniOP control: that is the working arrangement on this BAS 052, year of manufacture 2012. The machine was repainted only, so it is presented as it came out of service rather than as a stripped and rebuilt unit. Clamping is hydraulic and annealing runs under pyrometer supervision with the temperature held automatically, which takes the heat treatment out of the operator's hands. Welding ranges Band saw blades for wood: 6-50 mm. Bi-metal bandsaw: 6-50 mm. Control and clamping UniOP process control. Annealing temperature held automatically. Annealing pyrometer. Clamping: pneumatic. Mass and footprint Around 500 kg, standing 1400*900*1500 mm over width, depth and height. Instructions and packing come with the machine. With special Bandsaw pneumatic band insertion device for 10-25 mm width. Voltage 400-440 V Power 25 kVA Frequency 50-60 Hz Serial no. 239635 Year of manufacture 2012 Bandsaw blades welding widths From 6 to 50 mm possible, current setup is for blades from 10 to 25 mm wide.

Condition: used, Welding edge former, edge former, edge beveling machine TRUMPF Beveling of steel plates for weld preparation Type TKF 103 Sheet thickness: 4 - 25 mm Bevel length max: 10 mm Hedpfx Anedz Sq Esysu Bevel angle: 30° Power: 2000 watts Mains connection: 220 volts, 50 Hz - Equipped with a guide bracket for a 30° bevel angle - Resharpenable impact steel for high tool utilization - Set up for 20 mm sheet metal For beveling straight and curved edges with a minimum radius of 40 mm. For beveling edges on flat and curved workpieces, as well as tubes with an inner diameter of at least 80 mm. Weight: 14 kg

Condition: excellent (used), Trumpf TruTool C160- 2 Plus electric slitting shear Shears very good condition. Hsdouhm Rbepfx Anysu

Condition: excellent (used), The item for sale is a used Mannesmann Demag geared motor, consisting of a three-phase electric motor and an angular gearbox. Gearbox data: Manufacturer: Mannesmann Demag Type: S050 H-53-3 Hodpfx Aozw Ew Tjnyeu Number: 21300262 Gear ratio: i = 20.0 Oil capacity: 0.200 l Lubrication: oil Made in Germany Motor data: Manufacturer: Mannesmann Demag Motor number: 394356 Power: 0.37 kW Voltage: 220/380 V Current: 1.91/1.1 A Motor speed: 1370 rpm Frequency: 50 Hz Power factor: cos φ 0.78 Protection class: IP54 Insulation class: B Three-phase power supply With a gear ratio of i = 20, the approximate output speed of the gearbox is about 68.5 rpm.

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruFiber 6001 G, laser hours: 1 h, laser power: 300,012,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 20 mm, working length: 3,000 mm, working width: 1,500 mm, workpiece weight (max.): 8,000 kg, input voltage: 400 V, input current: 125 A, type of input current: three-phase, type of cooling: water, overall weight: 8,000 kg, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, The JFY BFC+ is a new fiber laser cutting machine featuring a high-quality TRUMPF laser source. It enables fast, precise, and efficient cutting of various materials. The machine combines a robust design with high beam quality, stable processes, and reliable performance in daily production. It is particularly suitable for companies in the sheet metal processing, steel, and mechanical engineering industries, as well as for the production of housings, industrial components, and ventilation elements. Key advantages of the machine: * Laser source power: various * TRUMPF laser source * Fiber laser technology * High cutting speed * Stable cut edge quality * Precise cutting head with autofocus * Robust machine design * Intuitive operation * Fast production preparation * Cutting of various materials possible * High repeatability accuracy of parts * Excellent price-performance ratio * Technical support and service in Poland Application areas: * Cutting of mild steel * Cutting of stainless steel Hedpfsz Eq H Hex Anysu * Cutting of aluminum * Cutting of structural elements * Manufacturing of housings and machine elements * Production of ventilation elements * Series and single-item production * Job-order cutting !!!Individual configuration of the machine is possible according to customer requirements, including table size, loading and unloading system, and additional equipment!!! We are happy to provide you with detailed offers, technical specifications, and delivery terms at any time.

Condition: ready for operation (used), KUKA 1FK7100-5AZ91-1ZZ9-Z S05 servomotor, serial number: YFW250673501009, used, in good condition, 100% functional, scope of delivery as shown in the photos. Hsdpfsz Dzt Iox Anyju

Condition: ready for operation (used), KUKA rotor for 1FK7100-5AZ91-1ZZ9-Z S05 servo motor, serial number: YFVN50667032021, used, in good condition, 100% functional, scope of delivery as shown in the photos. Hodpfx Ajz Dzursnyou

Condition: ready for operation (used), Rexroth HDS05.2-W300N-HS32-01-FW controller, serial number: 291391-00396, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Hodpfx Asi D Tqqsnysu

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 28-R1-H140mm, This Trumpf style 28° H140 high upper punch is specially designed for deep box and tall flange sheet metal bending. Its 140mm tall profile provides ample clearance to prevent tool interference while forming deep, high-sided workpieces. Standard Length L500mm/508mm/515mm under request, L550mm sectionalised. Made of high-grade tool steel, the punch is CNC machined, heat-treated and precision ground. It offers high hardness, great wear resistance and consistent bending angles, minimizing edge chipping and guaranteeing long-term durability. Hodpfx Ansvlvzceyju It perfectly fits TRUMPF press brakes as well as Wila clamping system with fast installation and accurate alignment. An excellent choice for metal fabrication workshops producing deep enclosures, cabinet frames and complex bent profiles to raise production efficiency and workpiece accuracy. Trumpf style 28° high punch, total height H140mm, ideal for deep box and tall flange bending • Extra tall profile offers generous clearance, effectively avoids tool interference on deep formed workpieces • Fabricated from premium tool steel, fully heat treated and precision ground for high hardness • Stable bending angle, superior wear resistance and anti-chipping performance for long service life • Fully compatible with TRUMPF press brake systems, enables fast tool setup and precise positioning • Optimized for manufacturing deep enclosures, cabinet frames and complex high-side sheet metal components • Consistent forming quality, helps reduce scrap rate and improve overall bending productivity

Condition: new, functionality: fully functional, Energy-efficient, precise, and fast press brake Driven by servo motors and ball screw Bending length: 1300 mm Press force: 40 t Stroke: 150 mm Comparable to Durma, Baykal, Ermaksan, Trumpf, Amada, etc. Installation height: 375 mm X-axis travel: 440 mm X-axis speed: 1000 mm/sec R-axis travel: 150 mm R-axis speed: 100 mm/sec Y-axis positioning speed: 150 mm/s Bending speed: max. 20 mm/s Retraction speed: 150 mm/s Motor power: 2 x 3.8 kW Machine length: 1880 mm Machine width: 2435 mm Overall height: 2320 mm Machine weight: 3400 kg Standard equipment: European clamping system (Promecam) at the top 60 mm die holder at the bottom Stable X + R axis back gauge, CNC-controlled 2 pcs. back gauge fingers, manually adjustable on linear guide Foot pedal with emergency stop button Including the following options: DA66T control system Fiessler AKAS 2M laser finger protection + FPSC Safety PLC (manual) 1 set of upper tooling for the entire bending length: Angle (°): 85° H: 104.65 R: 0.8 Max T/m: 100 Hodsq D Dv Dspfx Anysu Material: C45 1 set of lower tooling for the entire bending length: Type: Multi-V die (4-way) Angle (°): 85° H: 60 V: 16 - 22 - 35 - 50 Max T/m: 80 Material: C45

Condition: ready for operation (used), Year of construction: 2015, - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER and LOADING/UNLOADING SYSTEM X-AXIS TRAVEL: 4000 mm Y-AXIS TRAVEL: 2000 mm Z-AXIS TRAVEL: 115 mm Hjdpfx Aexqtx Sonyju RAPID FEEDS X-Y-Z: 245 m/min WORKING AREA: 4000 x 2000 mm ADMITTED LOAD ON TABLE: 1250 Kg SOURCE: TRUDISK 5001 ; 5000 W WEIGHT: 15000 Kg OVERALL DIMENSIONS: 10900 x 5700 x 2400 mm NOTE: LIFT MASTER COMPACT LOADING/UNLOADING SYSTEM

Condition: excellent (used), Year of construction: 2010, Boschert TRI 1500 CNC Z Rota Revo TRUMPF quick tool change system Punching force: 3 x 280 kN (28 tons) Station 1 Trumpf system tool - size 3 (105 mm) with spray device Hsdpfx Aeid I D Asnyou Station 2 Trumpf system tool - size 3 (105 mm) with freely indexable rotation Station 3 Trumpf system tool / Boschert Revotool - size 3 (105 mm) incl. Revotool with 8-position tool holder Travel distances x- 3000 mm (repositioning up to 9999 mm) y- 1580 mm Punching arm overhang: 1730 mm Tool system Trumpf size 1-3 (105mm) Labod 32060 graphic control / workshop programmable Max. sheet metal thickness: 6 mm (clamp opening) Max. stroke height: 90 mm, continuously programmable upwards and downwards. Punching scrap extraction Ball bearings in the machine table Table width left + right: 3200 mm each Table depth: 2810 mm Table height: 900 mm Overall width: 6482 mm Overall depth: 4600 mm Overall height: 2110 mm Drive power: 25 kVA Machine weight: 15,800 kg Hydraulic oil capacity: 160 l Color: Blue RAL 5017 / Light gray RAL 7035 Machine year of manufacture: 2010 Very well-maintained condition - Overhauled with a large amount of accessories

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 11598, controller model: SIEMENS 840D, laser power: 2,400 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, TRUMPF laser cutting system including LoadMaster! Submitting a bid requires collection by the deadline at the end of November! TECHNICAL DETAILS Axes X-axis: 3,000 mm Y-axis: 1,500 mm Z-axis: 115 mm Working area: 3,000 x 1,500 mm Laser and Power Laser output: 2,400 W Laser unit: TLF 2400 TURBO MACHINE DETAILS Control: SIEMENS 840D Electrical Data Mains connection: 400 V / 50 Hz Connected load: 71 kVA Control voltage: 24 V Main fuse: 3 × 125 A Compressed Air and Gas Connections Compressed air connection: 6 bar Nitrogen (N₂) connection: 30 bar Hsdpfxexu Ihij Anyeu Oxygen (O₂) connection: 20 bar Dimensions & Weight Dimensions (L x W x H): 9,800 x 5,300 x 2,000 mm Weight: 11,500 kg EQUIPMENT LoadMaster

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, stroke length: 445 mm, controller model: Trumpf TASC 6000, bending force (max.): 230 t, distance between stands: 2,690 mm, working length: 3,230 mm, TECHNICAL DETAILS Press force: 230 t Bending length: 3,230 mm Distance between frames: 2,690 mm Stroke: 445 mm Installation height: 615 mm MACHINE DETAILS Control unit: Trumpf TASC 6000 Total power requirement: 42 kVA Machine weight: approx. 19,200 kg Machine height: 3,300 mm EQUIPMENT 2 bending aids Wila tool clamping system (top and bottom) Hjdpfxsxn Sume Anysu 2 hand/foot controls Die shifting Lasersafe in front of the machine Side safety doors 6-axis backgauge

Condition: ready for operation (used), Year of construction: 1995, operating hours: 51,658 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, TECHNICAL DETAILS Sheet width: 2,500 mm Sheet length: 1,250 mm Sheet thickness: 8 mm Punching force: 220 kN MACHINE DETAILS Operating hours: 51,658 h Machine weight: approx. 11,050 kg Hjdpfxjy U U Npj Anyeu EQUIPMENT - TRUMPF Sheetmaster

Year of construction: 2002, operating hours: 10,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: AB 460 200, We offer a used vertical sputtering system, an ARDENNE VISS 300. The system dates back to 2002 and was expanded with a third chamber in 2016. The system features an airlock and three chambers equipped with SSM750RF magnetron sputtering units from Ardenne. This includes one generator from Trumpf Hüttinger, model PFG2500RF. There is also a dual magnetron sputtering source that is currently not installed, along with the corresponding control unit from Astral. Hjdpozp Ep Tefx Anysu There is a temperature control unit for one of the two cooling circuits to maintain a constant temperature, e.g., 38°C, as well as two external cooling units with heat exchangers. Zinc oxide (ZnO) and zinc sulfide (ZnS) were sputtered in the chambers. The system was in use until the end of May 2026 and was shut down without any defects. The system was regularly maintained by the operator and is in very good condition. Before delivery, we will service all installed vacuum backing pumps and turbopumps (bearing replacement). On request, assembly and commissioning can be arranged on-site. If you are interested in the system, please do not hesitate to contact us with any further questions.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 70,119 h, machine/vehicle number: A0111A0021, controller model: TruControl 1000, laser source model: Festkörperlaser, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,270 mm, Equipment: CE marking, safety light barrier, TECHNICAL DETAILS Working area: 2,500 x 1,270 mm Parts flap: 300 x 500 mm Clamping claws: 2 units Laser Solid-state laser: TruDisk 3001 LLK outlets: 1 unit Fiber optic cable: 10 m Cutting head Lens focal length: 200 mm MACHINE DETAILS Operating hours Laser on-time: 70,119 h Total operating hours: 73,936 h Control Laser control: TruControl 1000 Screen size: 15" EQUIPMENT Robust, easily accessible C-frame Precision linear guide system for high-accuracy processing Linear magazine including 2 clamping claws Maintenance-free drives Repositioning device with programmable hold-down Brush tables Good parts container Chip bin Enclosed beam guidance via fiber optic cable ContourLine FocusLine NitroLine Chiller unit Diode-pumped excitation for long service life Upgradeable for up to 3 additional LLK outlets Quick-change cutting head system ControlLine Electro-hydraulic punching head Programmable hold-down plate Tool length compensation Punch lubrication spray Slug extraction system Open control based on Bosch PNC-P Control panel with TFT color display Teleservice via Internet Automatic shutdown USB port Network connection CE marking Multi-beam light barriers Laser source safety monitoring system Quick disconnect for hydraulics Scatter radiation protection Additional LLK outlet for operation with Trumpf system MultiTool function MultiBend function Thread forming function Marking / fast embossing function Roller and deburring technology function Softpunch function Adaptive stroke calibration Spray lubrication for die Additional clamping claw Individually opening clamping claws Hodpfx Anjy R Uateysu Height-adjustable clamping claws Automatic clamping claw closing Repositioning cylinder with height-adjustable pressure pieces Sensor for parts chute Loading/unloading aid for brush tables Vibration-damped foundation Chip conveyor with tilting bin Liftable brush segment Parts conveyor belt

Condition: ready for operation (used), Year of construction: 2010, overall weight: 23,000 kg, punching force: 31 t, controller manufacturer: SIEMENS, sheet thickness (max.): 6 mm, number of axes: 11, This 11-axis Finn-Power SG6 12.61 was manufactured in 2010. It features a maximum punching force of 300 kN and can handle sheet thicknesses up to 6 mm. The machine includes a thick turret with 20 stations and an integrated CNC right-angle shear for efficient part separation. If you are looking to get high-quality punching capabilities, consider the Finn-Power SG6 12.61 punching and bending machine we have for sale. Contact us for further details. • Max. punching diameter: approx. 88.9 mm (in 3 mm steel) • Punching speed: up to 600 hpm (short pitch) • Positioning accuracy: ±0.1 mm • Max. sheet size: 1500 x 2500 mm • Automatic repositioning: yes, via CNC clamps • Number of clamps: 2 (with intelligent repositioning) Hodpfxoy H Iluj Anyeu • Loading/unloading capability: manual or automatic (configuration dependent) • Turret: Thick Turret / Trumpf style • Number of stations: 20 • Integrated shear: CNC right-angle shear • Shearing capacity: up to 6 mm (mild steel) • Process advantage: part separation without micro-joints or secondary operations • Edge quality: superior to traditional nibbling • Control unit: Finn-Power / Siemens • Software: NC Express / Tulus • Functions: automatic nesting; optimized punching and shearing sequences • Diagnostics: self-diagnostics and assisted maintenance

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, laser power: 3,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS X-axis travel: 3,000 mm Y-axis travel: 1,500 mm Z-axis travel: 115 mm Working area: 3,000 × 1,500 mm Workpiece weight: 710 kg Drive and control system Drive: TLF 3000 Turbo Laser power: 3,000 W Control unit: Siemens 840D Sheet thickness steel: 20 mm Sheet thickness stainless steel: 12 mm Sheet thickness aluminum: 8 mm Hedpey D H Ipjfx Anyju MACHINE DETAILS Overall dimensions (L × W × H): 9,800 × 5,300 × 2,000 mm Machine weight: 11,500 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 13,500 h, machine/vehicle number: A1240A0666, control type: CNC control, degree of automation: automatic, actuation type: electric, laser power: 4,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, table length: 4,000 mm, table width: 2,000 mm, working length: 4,000 mm, working width: 2,000 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, feed rate X-axis: 4,000 m/min, feed rate Y-axis: 2,000 m/min, overall weight: 14,500 kg, total length: 12,000 mm, total width: 5,300 mm, total height: 2,200 mm, Equipment: centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, TRUMPF TruLaser 3040 (L32) laser cutting machine with 4000 W power, year of manufacture November 2019, the machine has been in use only since 2020. The machine is in very good condition, fully operational, and has been serviced regularly every 6 months by an authorized service provider. Technical data: TRUMPF TruFlow CO2 laser - max. power TruFlow 4000 (programmable in 1% increments): 4000 W Working area: X axis: 4000 mm Y axis: 2000 mm Z axis: 115 mm Maximum sheet weight: 1800 kg Dimensions and weight: Length: 12,000 mm Width: 5,300 mm Height: 2,200 mm Weight: 14,500 kg TRUMPF CNC control system based on Siemens Sinumerik 840D: Maximum mild steel thickness: 20 mm Hodpfx Ansy D Ryvjyju Maximum stainless steel thickness: 15 mm Maximum aluminium thickness: 10 mm Gas consumption: Laser gas CO2: 1 l/h Laser gas N2: 6 l/h Laser gas He: 13 l/h Cutting gas: O2, N2 depending on application Laser cooling: closed-loop system Total device power consumption (including cooling unit): with TruFlow 4000 – max. 61 kW Compressed air consumption: with TruFlow 4000 – 31 Nm³/h Paint - color: Fixed machine parts, extraction, control cabinets, cooling unit: blue - RAL 250 20 20; frame crossbeam and laser unit: white - NCS S 0505 R80B.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, total height: 1,240 mm, !Exhibition return cabinet! WKS003 Tool cabinet set for bending with five vertical pull-outs of 180mm each Dimensions: W=1040mm, D=1300mm, H=1240mm Two-colour powder-coated (Trumpf) Housing: gentian blue structure (RAL5010) Pull-outs: white structure (RAL9002) Payload of 900 kg per pull-out Product code: 94032080 manufactured: DE/08 Weight: 445 kg net (475 kg gross) Hodpfxjuucmge Anyju Pre-assembled as a set for approx. 33 running metres of press brake tools. Max payload 900 Kg for each drawer

Condition: good (used), Electric sheet metal shear TRUMPF OMS 450 Max. sheet thickness, normal steel: 4.5 mm Hsdpfof Aznnsx Anyju Max. cutting width: 25 mm Drive power: 1.1 kW Without base frame! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Year of construction: 2005, operating hours: 54,000 h, condition: used, pressure 50 t chamfer lenght 1250 mm distance between columns 1020 mm Stroke beam 215 mm 470 mm 300 mm Quick speed,inspeed 150 mm/sec bendingspeed 0-10 mm/sec opening speed 150 mm/sec X-axes 600 mm 200 mm Hjdpjppdpcefx Anysu Z1+Z2 axes controlled by cnc manuell,4 Anschlagfinger mm Number of working hours 54000 h Dimensions of machine: length 1600 mm width 1500 mm height 2300 mm weight 4900 kg Control Task total power requirement 9 kW dimensions of the machine ca. 2x2x2,5 m

Condition: used, mileage: 1,001 km, empty load weight: 72 kg, driver cabin: other, gearing type: other, load capacity: 5,000 kg, Vehicle location: Bovenden. Hodpfxsi Rppro Anyou Drive unit AS05 (torque of approximately 3750 Nm at an operating pressure of 200 bar) suitable for excavators with a service weight of 3 to 5 tons. ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE; subject to changes, prior sale, and errors!

Condition: as good as new (ex-display), Year of construction: 2026, Boschert blanking machine LB13, for punching Type LB13 Punching/Trumpf Cutting capacity: 6 mm St40 / 4 mm V2A Internal stop for cutting strips. Station 2: Punching with Trumpf tool system Hodpohp N Ryofx Anyou Punch diameter max. 76 mm Overhang 150 mm Punching force approx. 15 tons with active stripping system Demonstration machine Year of manufacture: 2026