Used Used Vmi 40L Beater for sale (43,525)

Condition: excellent (used), ABB IRC5 Controller USED,20% discount at order more then 1 unit DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Psdpoxq Tvdjfx Af Rspw

Condition: used, Year of construction: 2004, machine/vehicle number: SO137, Used Sidel Combiblock for PET 18000 BPHTechnical Specifications & Performance DataThe Sidel Combiblock is a synchronized blow-fill-cap monoblock engineered for high-efficiency, reliable, and high-quality container production within used bottling lines and industrial packaging environments. Built in 2002, this integrated system combines a rotary PET blow molder, a high-precision gravity filler, and a robust capping turret into a single space-saving frame. The blowing section features 16 cavities for continuous operation and is equipped with an air recovery system to improve energy efficiency. The filling zone includes a pressurized clean cabin with filters, while the capping system handles advanced tethered closure profiles. Please note that molds are not included and a chiller is not supplied with the machine.Manufacturer: Sidel / Arol Combi Model: SBO 16 Series 2 (Blower) + Sidel ALSIM (Filler) + Arol (Capper) Year: 2002 Machine type: Synchronized Combiblock (Blow-Fill-Cap) Container material: PET Blower Cavities: 16 (molds not included) Blower Type: Rotary Neck finish set: Alaska Air Recovery System: Included Chiller: Not included Filler Valves: 63 mechanical valves Filling Type: Gravity filling Rotation Direction: Counter-clockwise Hygienic Enclosure: Pressurized cabin with air filters Capper Heads: 12 heads Cap Distribution System: Pick & Place Supported Caps: Plastic pre-threaded caps (GRAVITY and HEXALITE TETHERED GME30.28 NCB PT 1.00g - drawing available) Machine Condition: Fully overhauled at the end of 2024Advanced Automation & Control SystemsThis rotary platform supports steady, continuous motion for stable heating, blowing, and filling cycles. The isobaric gravity filling system utilizes 63 mechanical valves to ensure low-turbulence filling, while the integrated pressurized cabin with air filters guarantees a clean environment for sensitive beverage production. Integrated machine controls streamline changeovers and monitoring, while the air recovery system enhances sustainability and lowers compressed air consumption. Quick adjustments for the Alaska neck finish and the specialized Arol pick-and-place cap distribution system reduce downtime across multi-format industrial packaging operations.Production Line Integration CapabilitiesThe Combi system is designed for seamless integration into a complete beverage production line. By combining the Sidel SBO 16 blower, the ALSIM 63-valve gravity filler, and the Arol 12-head capper into a single monoblock, it eliminates intermediate air conveyors, reducing footprint and container scuffing. It pairs effectively with downstream packaging machinery and can operate inline with main conveyors, inspection systems, and labeling equipment. The machine is well suited for PET bottle handling and can be configured for a range of bottle sizes depending on installed molds and process parameters.Machine Condition & Maintenance HistoryThe complete Combi configuration was fully overhauled and refurbished at the end of 2024, supporting reliable, ready-for-operation performance for used bottling line projec... Pedpjzccgdsfx Af Repw

Condition: used, Year of construction: 2012, machine/vehicle number: LC647, Used Sidel filling line for water, PET 36000 BPHTechnical Specifications & Performance DataThis used bottling line is a high-efficiency PET still-water production system engineered for industrial packaging and beverage production. Designed around a 0.55L format and the 30/25 PCO1881 neck finish, it delivers a nominal output of 36,000 bottles per hour. Major equipment includes a Sidel SBO20 blow molder with 20 cavities, a Sidel EUROPA WM filling monoblock configured with 60 filling valves and 15 capping heads, and a Krones Contiroll HS labeling machine for continuous high-speed labeling. The line is a robust second hand solution for producers aiming to scale PET water operations with proven reliability.Production speed: 36,000 bph (design format 0.55L)Primary format: 0.55L (550 ml) bottlesNeck finish: 30/25 PCO1881Containers: PET bottlesBlow molder: Sidel SBO20, 20 cavitiesFilling monoblock: Sidel EUROPA WM, 60 valves / 15 capping headsLabeler: Krones Contiroll HSCap feeding: Sidel Aidlin 24 cap feederLine year: 2012 (core filler unit 2011)Advanced Automation & Control SystemsThe line integrates synchronized control between the blow molder, filling monoblock, cap feeding, and labeling systems to maintain stable, high-speed operation. Central operator interfaces coordinate start/stop sequences, speed ramps, and fault diagnostics. Safety interlocks, guarding, and emergency stops protect operators while ensuring consistent uptime. Quick adjustments and recipe-based parameters support repeatable setups for the 0.55L format, minimizing changeover downtime and optimizing overall equipment effectiveness.Production Line Integration CapabilitiesEngineered for inline operation, this PET bottling equipment connects via conveyor systems with accumulation and transfer sections for smooth product flow. The configuration supports still water applications with the 30/25 PCO1881 neck finish, enabling efficient handling from preform feeding and blow molding through filling, capping, and wrap-around labeling. The system architecture allows integration with upstream and downstream equipment such as inspection, case packing, and palletizing to form a complete beverage production and industrial packaging solution.Machine Condition & Maintenance HistoryThe line is still in production, indicating maintained operability and continuous performance under real operating conditions. Components have been kept in working order to support ongoing output. This second hand PET water line benefits from active status, helping prospective users evaluate performance and plan for a smooth transition to new production requirements.Operational Performance & VersatilityOptimized for still water, the Sidel EUROPA WM monoblock combines precise filling with consistent capping torque control across 15 heads. The Sidel SBO20 blow molder provides reliable preform heating and stretch-blow performance across 20 cavities for stable bottle quality at high speeds. The Krones Contiroll HS delivers continuous, high-speed labeling accuracy suitable for demanding PET beverag... Ppsdjzc Hqmepfx Af Rjw

Condition: used, Year of construction: 1999, Working area 4000 x 1500 mm Max pressure 30 ton Podpfx Asxyiw Aef Repw No. of stations in turret 21 pcs. No. of indexing tool stations 10 pcs. Max. material thickness 8 mm Max. sheet size 3061 x 1528 m Max. punch dia. 89 mm Control: Siemens Sinumeric 840 D Equipped with: 4 threading stations Automatic loading/unloading system

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, turning diameter over cross slide: 270 mm, turning length: 639 mm, turning diameter: 255 mm, spindle bore: 66 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 4,000 rpm, travel distance X-axis: 190 mm, travel distance Z-axis: 500 mm, spindle motor power: 15 W, rapid traverse X-axis: 16 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 20 m/min, total height: 2,030 mm, total length: 2,840 mm, total width: 2,190 mm, overall weight: 9,300 kg, Equipment: documentation/manual, This CNC lathe has been fully inspected and overhauled directly by the manufacturer, CMZ. The work included replacing the main components subject to wear, restoring the geometries, and completely realigning the machine, bringing it back to a condition of high precision and reliability. Key features: - CNC FANUC 31iTB iHMI - Main and secondary spindles - Double turret with Y-axis - Removable tool presetter - Chip conveyor with lateral discharge - Second high-pressure coolant pump (8 + 15 bar) - Used IEMCA MASTER 80 bar loader available upon request Main overhaul operations: Psdpfx Afszlymxo Rjpw - Replacement of the B-axis slides - Replacement of the belts and seals of the main and secondary spindles - Installation of a new complete secondary spindle assembly - Overhaul of the B and lower Z axis guards - Restoration of the machine's geometries - Realignment of the S1 and S2 spindles - Realignment of the turrets - Complete check of the powered tools Upon request, we can provide a complete list of the operations performed and photographic documentation of the main stages of the overhaul carried out by the manufacturer. For over 30 years, Otto Machine has been selecting and selling used machine tools in Italy and abroad. The machines can be viewed at our showroom or via video call. Contact us to receive the complete technical data sheet, photographs, videos, and all information about the machine. It is possible to arrange a visit to our showroom or a video call to view it remotely.

Condition: used, Year of construction: 2018, Minimum sawing capacity (90 gr.) 80 x 10 mm Max. sawing capacity (90 gr.) 1100 x 510 mm Ppsdpfx Afszh Exro Rjw Max. sawing capacity (45 gr.) 710 x 510 mm Max. sawing capacity (60 gr.) 460 x 510 mm Saw band size 9920 x 54 x 1,6 mm Max. saw band speed 60-170 m/min Control: Mitrol Pegaso 3.6.0 Equipped with: Various in/out feed rolls

Condition: good (used), We have a large quantity of used conveyor belts for sale. Ppjdjiyp H Ujpfx Af Rjw Belt width: 500 mm Overall width: 620 mm Manufacturer: Vanderlande Price per linear meter: 300 euros Drive module: 1500 euros If interested, please contact us. Other dimensions are available upon request.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Complete Used Egg Tray Production Line (Molded Pulp) – 3,500 pcs/hour Complete used molded pulp production line for manufacturing egg trays and a wide range of molded fiber packaging. The line is in excellent working condition and is ready for immediate installation and production. Production capacity: Up to 3,500 pcs/hour (30-cell egg trays) Approx. 77,000 pcs/day Approx. 1,925,000 pcs/month The line can produce: Ppjdozlbm Hepfx Af Rew 30-cell egg trays 20-cell and 20A egg trays Egg cartons for 6, 10, 12, 15 and 18 eggs (with corresponding molds) Fruit trays Bottle and cup carriers Shoe inserts Protective packaging for electronics and household appliances Medical trays Seedling pots Disposable tableware Other molded fiber packaging The complete production line includes: Hydropulper and complete pulp preparation system Rotary molding machine Vacuum system Air compressor and air receiver Multi-layer gas drying system with heat recovery Hot air circulation and exhaust system Final thermo-pressing machines Automatic labelling machines for egg cartons (6, 10, 12, 15 and 18 eggs) Electrical control system Mold sets Spare parts Complete technical documentation Advantages: Low power consumption Compact industrial design Reliable and proven technology Wide range of molded pulp products Fast installation and commissioning Suitable for both start-up production and capacity expansion Additional services: Installation and commissioning Personnel training Technical support during start-up Production optimization until full operating capacity is achieved The production line is available immediately and ready for shipment. Inspection is possible by appointment. Videos, additional photographs, technical specifications and documentation are available upon request.

Condition: used, TOS BHU 50×2000 – USED UNIVERSAL CYLINDRICAL GRINDER A used TOS BHU 50 universal cylindrical grinder, center distance 2,000 mm, from a company liquidation. Inspection on-site or via video call is possible at any time. The following technical data are taken from the machine-specific TOS-BHU-50 data sheet and serve as a technical reference. Binding values for this individual machine will be determined after inspection. KEY FEATURES - Automatic program for longitudinal, transverse, and plunge grinding, external and internal - Precision standard IT class 5 - Spindles on hydrodynamic bearings with automatic bearing adjustment - Infinitely variable workpiece spindle speed, swivel headstock on both sides - Swiveling grinding wheel head TECHNICAL DATA (BHU 50 SERIES) - Grinding diameter: 500 mm - Center distance: 2,000 mm - Center height: 250 mm - Grinding wheel (Ø x width x bore): 500 x 80 x 203 mm - Diameter of worn grinding wheel: 380 mm - Diameter of workpiece in open/closed steady rest: 110 mm - Diameter of chuck: 200 mm - Taper in workpiece spindle and tailstock spindle: MK 5 - Swivel range of workpiece spindle headstock: 90°, grinding wheel headstock: ±45° Ppodezi Strepfx Af Rew - Largest longitudinal travel of the table (at 2,000 mm center distance): 2,290 mm - Table speed, infinitely variable: 0.05-5 m/min - Grinding spindle speed: 1,230 / 1,470 rpm - Workpiece spindle speeds: 16 steps, range 12-400 rpm - Grinding wheel headstock motor: 7.5 kW - Total power consumption: 16 kVA - Machine weight (at 2,000 mm center distance): approx. 6,600 kg - Largest workpiece weight: 300 kg between centers, 300 kg cantilevered STANDARD EQUIPMENT (SERIES) - Grinding wheel 500 x 80 x 203 mm for 33 m/s circumferential speed, flange, and guard - Dressing and mounting device for the grinding wheel flange, balancing mandrel - 2 fixed centers MK 5, 2 open steady rests (Ø 10-110 mm) - Sedimentation coolant system, splash guard - Micrometric dressing device for the grinding wheel (tailstock) - Driver and operating key set, machine lamp, technical documentation We would be happy to clarify in advance whether the specific machine has the full range of features based on its actual equipment. CONDITION Used machine from a company liquidation. Sold "as is, where is," warranty excluded. On-site inspection or video call inspection is highly recommended; independent functional and accuracy testing is available upon request. A general overhaul is possible upon request and for an additional charge. OUR SERVICE Online or on-site factory inspection, transport can be organized upon request, installation, commissioning, and operator training by our service technicians, direct German-speaking contact person for spare parts and support, member of FDM, the German Association of Machine and Tool Wholesale. As this is an individual machine, availability is subject to prior sale. Please call or write to us briefly, and we will arrange an inspection appointment as soon as possible.

Condition: good (used), functionality: fully functional, tank capacity: 40 l, total width: 300 mm, total height: 930 mm, wall material: stainless steel, operating pressure: 5 bar, overpressure (max.): 7 bar, Used stainless steel pressure vessel Article number: 10624 Last application: Pharmaceutical Podpfx Ajza Eicof Rjpw Volume: 40 L Type: Standing on a mobile trolley Height of rollers: 80 mm Material (in contact with media): 1.4301 / AISI 304 Design: Single-walled Dome lid: 80x97mm Operating pressure according to nameplate: 5 bar Dimensions of vessel: Outer diameter: 300 mm Cylindrical height: 500 mm Overall height: 930 mm Overall width: 450 mm Overall length: 470 mm Materials: Inside: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 Features: Nameplate: Yes

Condition: used, Year of construction: 1997, machine/vehicle number: M304, Krones PET Block 54/8 Monobloc Filler–Capper – OverviewThe Krones PET Block 54/8 is a second‑hand monobloc composed of a rotary isobaric filler and rotary screw capper for PET bottles. Engineered for beverage production and industrial packaging, this unit is ideal for integrating into a used bottling line requiring counter‑pressure filling and PCO 1881 closure application. With 54 fixed filling valves and an 8‑head capper, it delivers reliable performance on large PET formats with precise neck handling.Technical Specifications & Performance DataConfiguration: Monobloc Filler–Capper (filler + capper; no rinser module)Filling technology: Isobaric, fixed-valve counter‑pressureNumber of filling valves: 54Valve pitch (center distance): 126 mmCapper: 8-head rotary screw capper for plastic closuresNeck finish: PCO 1881 (short finish) – plastic screw capsBottle materials: PETNominal capacities: 1.5 L = 9,000–10,000 bph; 3.0 L = 7,000–8,000 bphMachine rotation: ClockwiseOverall dimensions: L 3.8 m, W 3.2 m, H 2.65 mApprox. weight: 7,500 kgReference: M304Module DetailsFiller carousel: 54 valves, designed for carbonated beverages and counter‑pressure operation; suitable for still beverages with inerting depending on product setup.Capper turret: 8 capping heads optimized for PCO 1881 plastic screw caps; consistent application torque and bottle neck handling for PET containers.Advanced Automation & Control SystemsPLC platform: Siemens S7 for process control, diagnostics and integration.Signal and I/O: Provision for standard digital signals to synchronize with upstream/downstream equipment on a used bottling line.Process control: Counter‑pressure phases managed via PLC for stable fill levels and CO₂ retention.Production Line Integration CapabilitiesLine compatibility: Ideal for beverage production environments seeking to upgrade or expand a second hand industrial packaging line.Upstream equipment: Can interface with external bottle rinsers or blow molding machines (not included).Downstream equipment: Compatible with conveyors, labellers, packers and palletizers.Handling system: PET neck handling for stable transfer between filler and capper.Machine Condition & Maintenance HistoryStatus: In storage; filler dismantled and stored.Operating readiness: Operating after scheduled service/maintenance.Power: Not connected.Operating hours: Not set.Typical availability: Unit can be prepared for dispatch after service with a standard lead time.Operational Performance & VersatilityProcess benefits: Isobaric fixed-valve design supports low-foam filling, minimized oxygen pickup and consistent fill volumes on large PET formats.Format range: Optimized for 1.5 L and 3.0 L bottles; additional formats possible subject to parts and changeover kits.Closure system: Reliable application of PCO 1881 screw caps for CSD, sparkling water and other carbonated beverages.Installati... Ppjdpfx Aeyhcgbjf Rew

Condition: used, Year of construction: 2017, Used Yaskawa industrial robot, model MH-50-35, in good condition, with DX100 controller. Ppsdpozia Hgsfx Af Rjw

Condition: used, Year of construction: 2018, Used Yaskawa industrial robot, model MH-24, in good condition, with DX100 controller. Psdpfx Afezia Eco Rspw

Condition: used, Year of construction: 2017, functionality: fully functional, Used Yaskawa industrial robot, model MA-2010, in good condition, complete with DX100 controller. Pjdoziay Hepfx Af Rspw

Condition: used, turning diameter over cross slide: 710 mm, spindle bore: 180 mm, turning diameter: 1,000 mm, turning length: 4,000 mm, quill stroke: 250 mm, quill diameter: 125 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 6 rpm, bed width: 560 mm, overall weight: 9,700 kg, Equipment: rotational speed infinitely variable, KRAFT BV-40160 – USED HEAVY-DUTY LATHE A KRAFT BV-40160 from a company liquidation. Originally delivered to the previous owner as new from the factory in 2016/2017. On-site inspection or via video call is possible at any time. KEY FEATURES Ppedezi Duhopfx Af Rsw - Conventional guide and lead screw heavy-duty lathe, turning diameter 1,000 mm, distance between centers 4,000 mm - Additional guide for the tailstock on the lower machine bed - Frequency-controlled main drive 22 kW - Swiveling 4-position tool holder TECHNICAL DATA - Turning diameter over bed: 1,000 mm - Turning diameter over cross slide: 710 mm - Swing diameter in the gap: 1,280 mm, gap width 450 mm - Center height: 500 mm - Distance between centers: 4,000 mm - Bed width: 560 mm (3V + 1 flat), additional tailstock guide on the lower bed - Cross slide width: 350 mm - Spindle bore: 180 mm, spindle nose A2-15 - Spindle speeds: 4-speed, continuously variable 6-800 rpm - Main motor: 22 kW with frequency inverter - Cross movement of tailstock: 550 mm, upper slide movement: 225 mm - Tailstock quill Ø 125 mm, stroke 250 mm, taper MK 6 - Tool bit cross-section: 40 mm - Lead screw: Ø 60 mm x 2 T.P.I. - Weight: net approx. 9,000 kg / gross approx. 9,700 kg - Dimensions: approx. 5,845 x 1,950 x 1,925 mm STANDARD EQUIPMENT - Coolant system - Fixed steady rest Ø 60-380 mm - Swiveling, manual 4-position tool holder - Sliding chuck guard with electrical interlock - Swiveling, electrically interlocked guard for the upper tailstock - Traveling, rear chip / splash water guard - Halogen machine lamp - Installation / leveling elements, machine tools - German and English technical documentation, CE version - 400 V, 50 Hz, 3-phase CONDITION Used machine from a company liquidation. Sold "as is, where is", no warranty. On-site inspection or via video call is strongly recommended. OUR SERVICE Online or on-site factory inspection, transport organized on request, assembly, commissioning and operator training by our service technicians, direct German-speaking contact person for spare parts and support, member of the FDM, the trade association of the machine and tool wholesale trade. Since this is a single item, subject to prior sale. Please call or write to us, and we will arrange an inspection appointment as soon as possible.

Condition: used, Year of construction: 2013, functionality: fully functional, spindle bore: 105 mm, turning diameter: 800 mm, turning length: 3,000 mm, quill stroke: 240 mm, quill diameter: 100 mm, spindle speed (max.): 720 rpm, spindle speed (min.): 7 rpm, bed width: 600 mm, overall weight: 5,500 kg, rapid traverse X-axis: 4 m/min, rapid traverse Z-axis: 2 m/min, workpiece weight (max.): 2,000 kg, IMTI SDM 800/3000 – USED HEAVY-DUTY LATHE An IMTI SDM 800/3000, manufactured in 2013, from a company liquidation. Originally an exhibition/demonstration machine in our showroom, sold to the previous owner in 2016. Inspection on-site or via video call is possible at any time. KEY FEATURES - Conventional guide and lead screw heavy-duty lathe, center distance 3,000 mm - Multifix quick-change tool holder with 4 tool holders - 4-jaw faceplate Ø 800 mm, 3-jaw chuck Ø 500 mm - 3-axis digital display SINO SDS6-3V TECHNICAL DATA - Swing over bed: 800 mm - Swing over cross slide: 1,000 mm - Swing over carriage: 480 mm - Center distance: 3,000 mm - Bed width: 600 mm - Spindle bore: 105 mm, spindle nose DIN 55027 size 11 - Spindle taper: Ø 120 mm, taper 1:20 - Spindle speeds: 7-720 rpm - Thread cutting: metric 1-240 mm (52 steps), inch 1-14 (26 steps), module 0.5-120 mm (53 steps) - Longitudinal feed 0.1-24.3 mm/rev, cross feed 0.05-12.5 mm/rev - Rapid traverse longitudinal/cross: 4,000 / 2,000 mm/min - Tool toolbit cross-section: 50 x 50 mm - Cross slide travel: 420 mm, top slide: 200 mm - Tailstock quill Ø 100 mm, taper MK 6, stroke 240 mm - Fixed rest Ø 20-200 mm, traveling rest Ø 20-100 mm - Main motor: 11 kW, rapid traverse motor: 1.1 kW - Workpiece weight between centers: max. 2 t, in chuck: max. 500 kg - Total weight: approx. 5,500 kg Pjdpfxszi Dhbe Af Rjpw STANDARD EQUIPMENT - Multifix quick-change tool holder size D1 with 4 tool holders - 4-jaw faceplate Ø 800 mm, 3-jaw chuck Ø 500 mm incl. chuck flanges 350/500 mm - 3-axis digital display SINO SDS6-3V - Fixed rest Ø 20-200 mm, traveling rest Ø 20-100 mm - Complete coolant system - Fixed center, drive plate, change gears - Electrical end stop longitudinal, halogen machine lamp - German and English technical documentation incl. CE declaration of conformity - 400 V, 50 Hz, 3-phase CONDITION Used machine, manufactured in 2013, from a company liquidation. Sold “as is”, no warranty. Inspection on-site or via video call is highly recommended. OUR SERVICE Online or on-site factory visit, transport organized upon request, assembly, commissioning and operator training by our service technicians, direct German-speaking contact for spare parts and support, member of the FDM, the trade association for wholesale trade in machines and tools. Since this is a single item, subject to prior sale. Please call or write to us, and we will arrange an inspection appointment as soon as possible.

Condition: used, functionality: fully functional, Great deals, top prices – please inquire. I am offering 4 used, refurbished Flow high-pressure pumps with oil coolers, see below: Pump 1 Flow 7XD -60, 7856 operating hours, 2 intensifiers, both working simultaneously, 4.5 l/min, 45 kW motor, oil-water cooling, Pump 2 Flow 7XD -60, 25179 operating hours, 2 intensifiers, both working simultaneously, 4.5 l/min, 45 kW motor, oil-air cooling, Pump 3 Flow 20XR, 48000 operating hours, 2 intensifiers, 1 is redundant as a reserve, 3.8 l/min, 37 kW motor, oil-air cooling Pump 4 Flow 20XR, 55000 operating hours, 2 intensifiers, 1 is redundant as a reserve, 3.8 l/min, 37 kW motor, oil-air cooling The pumps are from a single original owner and are in good condition. Pump 1 + Pump 2 are already ready for shipping and have been tested. Pjdpszivhtjfx Af Repw Pump 3 + Pump 4 are also available at a special price as a unit or for self-installation. Both pressure intensifiers per pump have been completely overhauled. Prices available upon request.

Condition: used, Year of construction: 2000, machine/vehicle number: SO117, Used HDPE 4+4 Blow Molding Machine TECHNE SYSTEM up to 2700 bphMain Technical Features and Premium UpgradesThis HDPE Blow Molding Machine offers a highly specialized system for blow molding containers made of high-density polyethylene (HDPE). Specifically, this is a TECHNE 4000 T660 manufactured in 2000, which is preserved in an OPTIMAL state of cleanliness and order. Reflecting its meticulous maintenance history, the machine was cleaned daily in the lower section, and completely blown and cleaned once a week, starting from the extruder down to the bottom.In December 2023, the system received a brand-new retrofit consisting of a latest-generation Gefran PLC equipped with a color touch screen, fully customizable functions, and complete machine control via HMI. This upgrade also features a Gefran GFC modem for remote assistance.The machine operates with a 4+4 cavity double head configuration with a 150 mm cavity spacing, handling bottle formats up to 2 liters and producing up to 2700 bottles per hour (bph). This design optimizes production with a symmetrical and highly efficient layout. Furthermore, the system is equipped with proportional hydraulics for movements utilizing Rexroth hydraulics, along with independent control of 8 parisons. It features 8 parisons with independent profiles managed by Moog servovalves, offering precise parison control up to 400 points.The production line comes exceptionally well-equipped with peripheral machinery, including a complete plastic loader kit with a Moretto mixer, a Tria granulator (2022), and a Villani double leak tester (comprising 2 independent leak testers). Additionally, an extensive complete replacement kit is included. These spare parts encompass:All Rexroth proportional movement valves (carriage, nozzles, and molds)All linear transducersCarriage translation columns complete with a full set of bushingsClosing lever equipped with bushings and pinsA Voith hydraulic pumpAll ATOS hydraulic cylindersA brand-new direct current (DC) extrusion motorA brand-new direct current (DC) inverterVarious mechanical parts, heating elements, nozzles, cores, and diesYou can access this machine starting mid-October.Mold Configuration and FlexibilityTo ensure high precision in shaping bottles, the blow molding system provides a cavity spacing of 150 mm. Additionally, the machine includes a double carriage with a 660 mm carriage stroke, which allows you to control the production cycle optimally and minimizes downtime. In particular, this Blow Molding Machine accommodates containers up to 2 liters, giving you significant flexibility in producing various types of packaging. The system supports both straight or inclined blowing (up to 30 degrees), adapting easily to different container geometries.The extrusion system features a 100 mm / 25 L/D extruder equipped with a vertical filter. Although the machine does not include molds in its standard supply, it supports a wide range of mold sizes, up to a maximum capacity of 2 liters. Furthermore, you can easily adapt the entire system to meet specif... Ppsdpfxjvgvkae Af Rew

Condition: used, Year of construction: 2010, machine/vehicle number: PR28, Used SACMI OIMA 350T injection molding machine - Year 2010Technical Specifications & Performance DataThis injection molding machine for PET preforms is a high-output cell engineered for beverage production and industrial packaging applications. Manufactured by OiMA, it combines robust clamping performance with precise injection control and a complete set of auxiliaries for reliable second hand operation within a used bottling line context.Manufacturer: OiMA S.p.A.Model: 6500.350Application: PET preform production for beverage packagingClamping force: 350 tonInjection volume: 4500 cm³ per 100 MPaInstalled power: 436.58 kWPower supply: 400 V, 50 HzMachine mass: 20,000 kgPress year: 2014Mold: SACMI PPM 072 H, 72 cavities, 34 g preforms, neck type Alaska Blue PRE 342Year: 2010Mold temperature: 8–12 °CMold mass: 9,720 kgAuxiliaries included: Sytrama REV 156 PET take-out robot; Plastic System dehumidifier; Plastic System hopper H6000H; Plastic System mold-area dehumidifier DSH 2004 MIC DISP; conveyor; palletizing systemMaterial processed: PETAdvanced Automation & Control SystemsThe cell integrates a Sytrama REV 156 PET robot for automatic take-out and part handling, supporting stable cycle times and consistent product quality. The machine is equipped with an electric charging unit and hydraulic accumulators for fast, repeatable injection phases. Operator-friendly controls and interlocked safety guards help streamline setup and routine operation.Automated take-out and transfer via Sytrama robotAccumulator-assisted injection for stable, fast cyclesIntegrated dehumidification and material handling for resin conditioningElectrical specifications: 400 V, 50 HzEngineered for quick, repeatable mold changes and efficient maintenance accessProduction Line Integration CapabilitiesThis injection cell can operate as a standalone preform production unit or be integrated upstream of stretch blow molding in a PET production line. The included dehumidifiers, hopper loader, conveyor, and palletizing system simplify in-plant logistics and align with broader bottling equipment and packaging machinery workflows.Standalone or inline operation with PET packaging linesDehumidification and hopper loading optimize PET resin preparationConveyor and palletizing system support downstream handling and warehousingIdeal for beverage production environments targeting consistent preform supplyMachine Condition & Maintenance HistoryThis second hand injection molding machine is presented in operational condition and ready for immediate use after standard site preparation and commissioning. The core press is year 2014, with the SACMI mold and auxiliaries from 2010, providing a balanced mix of robust mechanics and proven proce... Psdpfjzktdbox Af Rjpw

Condition: used, Chip conveyor Width: 500 mm Ppjdpezi T E Njfx Af Rsw Height: 900 mm Used for wood chip transportation after screen

Condition: used, Used PSV approximately 4,000 litre working capacity and approximately 6,300 litre total capacity (product dependent) vertical stainless steel reactor. Unit has welded dished top and bottom heads. Unit measures approximately 1,800mm diameter x 2,450mm straight side. Internal rated 6 bar/full vacuum design pressure at 130 deg.c. External stainless steel coil jacket rated 9 bar/full vacuum design pressure at 185 deg.c. Unit has external stainless steel cladding. Has top entry stainless steel 2-tier, 4-blade pitched blade agitator driven by motor/gearbox. Unit has (4) stainless steel internal wall mounted baffles. Specifications: Capacity: 4,000 L Type of stainless: Stainless Steel Internal Pressure: 6 bar Internal Temperature: 130°C Jacket Pressure: 9 bar Diameter: 1,800 mm Straight Side: 2,450 mm Type Of Heads: Welded Dished Top and Bottom Podpozdfb Hefx Af Rjpw Legs/Lugs: 4 Lugs

Condition: used, Year of construction: 2004, machine/vehicle number: PR25, Used NEGRI BOSSI 850T injection molding machine - Year 2004Technical Specifications & Performance DataThis NEGRIBOSSI U850 Injection Molding Machine delivers high-tonnage performance for large-shot applications and precision molding. Configured with a 100 mm screw, it offers robust shot volume and clamping power, making it suitable for industrial packaging components and beverage production accessories. Manufactured in 2004, the machine integrates proven NEGRIBOSSI engineering with an EUROMAP 8500H-6500 injection unit and a user-friendly HMI.Model: U850 (EUROMAP 8500H-6500)Clamping force: 8500 kNScrew diameter: 100 mmShot volume: 3925 cm3Shot weight (PS): 3570 gMaximum shot weight: 3750 gInjection pressure: 1670 barBetween tie-bars (H x L): 1140 x 1020 mmPlaten size (H x L): 1670 x 1580 mmMould height (min–max): 400–1100 mmOpening stroke: 1200 mmEjector stroke: 399 mmHydraulic operating pressure (mould/injection): 180 barMotor-pump power: 74 kWPlasticizing power (100 mm): 37 kWHeating power (100 mm): 37 kWTotal installed power (100 mm): 198 kWCore pullers: 2Robot interface: YesAir circuit: 1Electric dosing motor: YesMachine dimensions (L x W x H): 11550 x 2600 x 2305 mmMachine weight: 39600 kgAdvanced Automation & Control SystemsThe U850 features a modern HMI with clear operational menus and diagnostic pages to streamline setup and production. The machine supports robot interface connectivity for automated part removal and downstream handling. Electric dosing and precise plasticizing power ensure stable melt quality and repeatable cycles. Safety controls and process monitoring are integrated through the control interface to maintain consistent, high-quality output.HMI control: multi-page interface with technical characteristics viewAutomation: robot interface enabled for pick-and-place and cell integrationPower architecture: motor-pump 74 kW; plasticizing and heating 37 kW each (100 mm configuration)Process monitoring: live readouts for temperature, times, positions, and pressuresProduction Line Integration CapabilitiesThis injection molding machine integrates seamlessly into industrial packaging and beverage production environments, supporting automated cells with robots, conveyors, and quality control stations. Its robust clamping unit and generous tie-bar spacing accommodate multi-cavity molds for components used in used bottling line refurbishments and second hand production setups.Compatible with automated part removal robots and conveyors Ppedpfezkht Dsx Af Rjw

Condition: used, Year of construction: 2022, machine/vehicle number: LC653, Used Micro can CL10 line 4000 Cans per hourTechnical Specifications & Performance DataThis complete automatic canning line is a compact, engineered for efficient beverage production in aluminum cans. Manufactured by Micro Can, it integrates key bottling equipment into a cohesive, space-efficient unit suitable for industrial packaging environments. As a second hand, used bottling line, it offers proven reliability and excellent value for expanding or optimizing production.Line type: Complete automatic canning lineManufacturer: Micro CanMain module: Micro Can CL10 filler/seamerRated output: 4,000 cans per hourContainers: Aluminum cansFormats: Standard 0.33ml and 0.44mlFilling type: gravity Advanced Automation & Control SystemsThe line is designed for streamlined operation with integrated control and coordinated infeed/outfeed logic between the depalletizer, filler/seamer, and labeling machine. Quick setup and simple recipe changes support efficient format adjustments. Operator-friendly controls, interlocked guards, and emergency stops provide safe, intuitive handling during routine operation and maintenance. The configuration minimizes interface risks and ensures stable synchronization across the complete packaging process.Production Line Integration CapabilitiesOptimized for inline operation, this second hand canning line connects upstream depalletizing to downstream labeling with harmonized conveyor handling. It is suitable for beverage production expansions, pilot facilities, or as a dedicated canning cell within a larger packaging plant. Designed for aluminum cans, it can be interfaced with upstream processing and downstream secondary packaging equipment as needed.Machine TypeManufacturer/ModelYearDepalletizerFilling MonoblockMicro Can CL10Labeling MachineWrap-around labellerMachine Condition & Maintenance HistoryThe line is offered as a complete, ready-to-operate unit. As a used bottling line, it has been configured for immediate deployment in industrial packaging environments, subject to standard site preparation and utilities. Overall condition is consistent with a professionally integrated second hand canning line built for dependable daily operation.Operational Performance & VersatilityWith a rated output of 4,000 cans per hour, the Micro Can CL10 filler/seamer delivers stable filling and precise seaming performance. The wrap-around labeling machine supports continuous production with consistent label application, and the depalletizer... Ppodpfxozkhtqj Af Rsw

Condition: used, Year of construction: 2023, machine/vehicle number: ET195, Used adhesive labeling machine PE labelers overhauled up to 6000 BPH Complete transformation from a mechanical machine to an electronic machine Used rotary labeler overhauled up to 6000 complete replacement of the head with new plates, motors, boards, and double jacks for optical centering replacement of groups with 3 new adhesive groups PE labeler or PackLab type. complete overhaul of the glue group for the l-shaped seal for the PE labelers review of seal stretching pliers new electrical panel new complete and CE standard protections for the PE labelers installation of the touchscreen and plc control panel new certifications for Used labeler rotary machine overhauled up to 6000 a bottle passage format for the Used adhesive labeling machine overhauled up to 6000 composed of: auger entry/exit star counter star 11. one seal format per glue group for adhesive rotary labeling up to 6000 complete with: 1 warehouse 3 blades 1 hook drum Delivery time equipment of the Used adhesive labeling machine overhauled: Podpfevlnv Eex Af Rjpw This PE labeler can be serviced and delivered in approximately 90 working days from the order and payment of the first deposit. It is important to approve all technical drawings and label measurements for the PE labelers. This allows orders for replacement materials for the PE labelers to be prepared in an efficient time. In this particular historical period, we encounter very long delivery dates for electrical materials. Is for this reason that it is very important to plan the entire project in the correct direction to avoid wasting time for the PE labelers overloaded. For the installation of the PE labelers we only use our own direct workers, to give safety to our customers. We follow the entire process from start to finish and to the commissioning of the new or used machinery.

Condition: used, Suction collector Suction bell -used- ----- Technical data ----- Connection piece: 350 mm, Psdpju R Tb Uefx Af Rspw Spigots: 5 pieces, nozzle diameter: 2x160,2x100,1x120 mm