Used Wynveen Pellet Sieve for sale (584)

Condition: used, empty load weight: 6,075 kg, maximum load weight: 28,925 kg, overall weight: 35,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2027, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 435/50 R19,5, color: red, Year of construction: 2023, Equipment: ABS, Color: RAL 3002 Carmine Red Front/rear panel: Purple / white Extension ladder at the rear, door latch on the side Support wedges with holder, aluminum side impact protection, galvanized steel underride protection, quarter panel fenders in front of the 1st axle and behind each axle, with anti-spray flaps behind each axle, rear impact protection, Pallet stop on both sides, approximately 15-20 mm high, in a bolted design, loading height is reduced by approximately 15-20 mm, plastic toolbox Axles + Suspension SAF disc brake axles, "axle/chassis laser measured" to reduce tire wear and fuel consumption, air suspension, 1st axle automatic lift axle, including forced lowering and starting assistance, Activation via "3x braking" (starting assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Axle lift below the recommended ride height, therefore no warranty for tire damage Braking system 2-line compressed air braking system, color-coded lines for easy servicing, spring brake parking brake, 2 fail-safe coupling heads in front, without connecting line, EBS, electronic braking system with EBS socket in front, without connecting cable. Note: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Ride height in conjunction with lift axle, when the lift axle is raised, the loading or overall height increases by 50 mm (in Mega Flex only at low ride height or saddle height), vehicle - driving stability system Wheels and tires 435/50 R19.5", manufacturer's choice, steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side, 2 white position lights in front 2 white/red marker lights at the rear, 2 x 7-pole and 1 x 15-pole fail-safe sockets in front Floor Sieve-printed panels approximately 30 mm thick, on longitudinal supports for high point load capacity for forklift axle load up to max. 7100 kg Front wall / corner posts 2,580 mm high, corner posts steel in volume design, release device for side tarpaulin on front wall, "Crash-Blocker," bottom inside at approximately 140 mm height with steel impact protection Intermediate supports 3 pairs of sliding supports, fully adjustable in length, with 4-fold insertion pockets and a long pocket at the bottom, 3 pairs of support positions Insertion slats 5 rows of wooden insertion slats Rear wall / corner posts Corner posts at the rear, steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-wing with 2 internal rotary rod locks each Tarpaulin Tarpaulin, with welded-in horizontal and vertical straps Tensioning closures made of stainless steel Roof Fliegl sliding roof, sliding cover, end lift at the rear that can be folded up, with a cover that can be slid from back to front, L-shaped roof beam for the automotive industry, inner width between the roof beams approximately 2,490 mm, tarpaulin color: white, roof non-elastic, little deflection of the roof beam during loading and unloading, EcoLift - lifting roof can be raised by approximately 380 mm, on both sides, with gas spring support, 3 driving positions in the front: interior height in the front approximately 2900mm/ 2950 mm / 3000 mm Optimal rain strip at the rear, on top of the end rail, above the doors Hjdpfx Abezun I Aefjfk Fliegl manufacturer certificate for body strength according to EN 12642 XL, Fliegl manufacturer certificate for body strength accor

Condition: new, Year of construction: 2025, weight 720 kg diameter 1360 mm height 1200 mm 0 520 l Vibratory Surface Finishing Machines With Separator VKUE series machines can be used for surface finishing of metal and nonmetal work pieces. This type of machine has a large sieve surface and allows easy separation of the workpieces from the grinding stones. Hedpfey S D H Ssx Abfjfk Optional Accesories - Pneumatic Sound Lid - Pneumatic Flap Control - Frequency Control - Dossage Pump - Magnetic Valve - Control Panel Base - Rinsing Pipe (Different Types) The pictures are for orientation only. The optional accessories can be purchased for an additional charge.

Year of construction: 2023, condition: new, IMMEDIATELY AVAILABLE ! Vibratory finishing machines with separator The machines of the series VKUE can be used for the surface treatment of metallic and non-metallic workpieces. These machines have a large sieving surface and allow easy separation of the workpieces from the abrasive bodies. Optional accessories - Pneumatic sound flap - Pneumatic damper control - Frequency control - Metering pump - Magnetic valve - Control panel base - Flushing tube (different types) The pictures are for orientation only. The optional accessories are available Hfedpjn Smbrefx Abfok additional charge.

Condition: new, weight 1050 kg diameter 1550 mm height 1250 mm 0 845 l total power requirement 5,5 kW Vibratory Surface Finishing Machines With Separator VKUE series machines can be used for surface finishing of metal and nonmetal work pieces. This type of machine has a large sieve surface and allows easy separation of the workpieces from the grinding stones. Optional Accesories - Pneumatic Sound Lid Hfedpeyk Iigsfx Abfjk - Pneumatic Flap Control - Frequency Control - Dossage Pump - Magnetic Valve - Control Panel Base - Rinsing Pipe (Different Types) The pictures are for orientation only. The optional accessories can be purchased for an additional charge.

Year of construction: 2023, condition: new, IMMEDIATELY AVAILABLE ! Vibratory finishing machines with separator The machines of the series VKUE can be used for the surface treatment of metallic and non-metallic workpieces. These machines have a large sieving surface and allow easy separation of the workpieces from the abrasive bodies. Optional accessories - Pneumatic sound flap - Pneumatic damper control Hfodpfxen Smcle Abfek - Frequency control - Metering pump - Magnetic valve - Stand for control panel - Flushing tube (different types) The pictures are for orientation only. The optional accessories are available additional charge.

Condition: new, weight 720 kg diameter 1360 mm height 1200 mm 0 520 l Vibratory Surface Finishing Machines With Separator VKUE series machines can be used for surface finishing of metal and nonmetal work pieces. This type of machine has a large sieve surface and allows easy separation of the workpieces from the grinding stones. Optional Accesories - Pneumatic Sound Lid - Pneumatic Flap Control - Frequency Control - Dossage Pump Hodpfx Abey Suu Tefofk - Magnetic Valve - Control Panel Base - Rinsing Pipe (Different Types) The pictures are for orientation only. The optional accessories can be purchased for an additional charge.

Condition: new, weight 540 kg diameter 1200 mm height 1100 mm 0 382 l total power requirement 1,9 kW voltage 350/50 V length in total 1820 mm Vibratory Surface Finishing Machines With Separator Hsdpfjymf Hzex Abfsfk VKUE series machines can be used for surface finishing of metal and nonmetal work pieces. This type of machine has a large sieve surface and allows easy separation of the workpieces from the grinding stones. Optional Accesories - Pneumatic Sound Lid - Pneumatic Flap Control - Frequency Control - Dossage Pump - Magnetic Valve - Control Panel Base - Rinsing Pipe (Different Types) The pictures are for orientation only. The optional accessories can be purchased for an additional charge.

Year of construction: 2008, condition: used, 2008 | Powerscreen Horizon 6203 | Used Screen 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 42900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 71 inspection points 51 approved ✅ 16 imperfect ℹ️ 4 issues ⚠️ 📌 Inspector's Comment: Several bodywork tasks are required, as well as labor time and some small hydraulic motors. Perhaps replace the entire sieve with a standard exchange, but after the work, it remains overall a functional machine and a rare model. Hjdjzuaxyopfx Abfefk 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40954 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Year of construction: 2022, condition: like new (used), functionality: fully functional, A very rare opportunity to acquire a 3 year old 600 kgs per hour, complete hot wash recycling and cleaning line suitable for a range of rigid polymers to be size reduced and intensively cleaned. Machinery has very low hours of operation, and is only available as a result of re-organisation of the current operations. Materials are firstly delivered either by manual loading , or by an automatic pnematic box or cage lift/tilt system to a picking belt and metal detection tunnel. Materials then proceed via an inclined conveyor belt to a Hot washing granulator. Size reduced materials then drop onto a vibrating sieve ,to separate the majority of dirty water and any fines. Granulated materials transfer to an inclined Archimedes screw delivering materials to a horizontal high speed centrifugal cleaner. After this cleaning the materials enter a large diameter vertical drying centrifuge and all used water is then recirculated to heated tank to be reused. Finished materials then conveyed to a ZigZag air separator for final fines/dust removal before being blown to a cyclone over a double bagging tower. The fines separated at this stage are blown to a separate cyclone over a single bagging tower for fines and fibres etc removed by the ZigZag tower. The entire line can be seen in operation in the UK and by special arrangement could be trialed with potential buyers materials. Used water caould be recycled through the system, but this is dependent upon the type of contamination to be removed. The entire line is of European manufacture, and all materials exposed to water are manufactured in Stainless Steel. Hodpfx Aboxcnxdsfjfk Decommissioning, Transport, Installation and commissioning together with operator training can also be offered internationally to a buyer of the equipment.

Year of construction: 1988, condition: ready for operation (used), A regeneration plant Erema is available. Components: conveyor belt, extrusion unit, screen changer, strand pelletizer, control unit, and intermediate conveying system. An on-site inspection is possible. Hsdjw Dfgwepfx Abfofk

Year of construction: 1979, condition: ready for operation (used), A compound feed line is available. 1) Bühler hammer mill. 2) Bühler DPAB pellet press, year of manufacture: 1979. 3) Loos rapid steam generator, year of manufacture: 2000, capacity: 300kg/h, max. operating overpressure: 13bar. 4) Gebrüder Jensen weighing and mixing unit, year of manufacture: 1979. Production capacity range: approx. 5-10t/h. Including the associated drag conveyors and bucket elevators. Documentation available. An on-site inspection is possible. Individual sale by arrangement is possible. Hfodpfx Aey Aad Iebfok

Condition: new, Year of construction: 2026, For sale: various nozzles from Nozzitec - COLD JET. A quality. These nozzles can also be used on all COLD JET MICROCLEAN blasting machines. We have all the parts in stock for these machines. Contact us. Worldwide shipping. Hfjdpjztkw Rsfx Abfek Cold Jet dry ice machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: new, Year of construction: 2026, For sale: various nozzles from Nozzitec - COLD JET Hsdpsztkv Hefx Abfofk A quality. Also applicable to all COLD JET blasting machines. AERO 30 AERO 40 FP / HP AERO 75 DX AERO 80 FP We have all parts in stock for these machines. Please contact us. Worldwide shipping. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: good (used), Year of construction: 2018, Recycling technology, agglomerator, high-performance mechanical dryer, dry cleaner, plastic recycling machine, drying system -Handover: in its current condition as inspected -Condition/Scope of delivery: untested, as shown in the pictures -Manufacturer: WIPA, Dry Cleaner Mechanical High-Performance Dryer -Type: MD 1250-3000/90/0.75/3R Hjdpfeztndujx Abfofk -Drive motor: 90 kW -Drum length: 1800 mm -Sieve: Perforation Ø 5 mm -Dimensions: Dryer 4475/2140/H2630 mm / Control cabinet 1200/660/H2195 mm -Weight: 8400 kg / 340 kg

Condition: ready for operation (used), Screw diameter: 250mm, length: 4170mm, with documentation, without accessories or spare parts, was used for sieving fish meal. Hfedsm Amicopfx Abfsk

Condition: ready for operation (used), Plant includes receiver tank with agitator, extractor, centrifugal pump, sealing water tank, corner tube sieve eluate line, corner tube sieve condenser, vacuum unit, condenser, oil heat exchanger, conveying unit V 3825 and 3821, sight glasses and fittings, with documentation. Hodpfjiquuvex Abfsfk

Year of construction: 1980, condition: reconditioned (used), machine/vehicle number: 2489, stock-No.:2489 1 used, functionally tested Single-Screw-Extruder, ready for trial-run: Manufacturer: KUHNE Germany Type: ES 60-24 Screw- Ø 60 mm – 24 LD Main-feed zone can be chilled( cooling unit not included ) Screw speed up to 100 r.p.m. Extruder Motor: 25,5 kW – 63 A – DC 4x Heating zones with air-cooling 3x additional heating zones for down-stream equipment as: Hfsdpjd Sg Hcsfx Abfjk die-head, tools, screen-pack-changer, etc. control board Relating down-stream-equipment as screen-pack-changer, pelletizing etc. against additional price, details upon request. More extruders ex stock available, visit us or ask for our most recent Machine-Stock-List. You´re welcome.

Year of construction: 2003, condition: refurbished (used), Stock-No. 2086 twin-screw compounding extruder BERSTORFF type ZE 60 A - UT screw size 2 x 64 mm - 32 LD Capacity 800 kg/h depening material specifications Drive from 197 kW up to 350 kW possible , optional by appoinment L/D 34 - 40 LD , by appointment > due to your material formula needs drive up to 230 kW - 350 kw optional against add.price 1x venting port Hedpoc Rukwjfx Abfjfk new control board optional - equipment against additional price: screen-pack-changer pelletizing material feeding , loss-in-weight gravimetrci blenders pellet-classifier and more Please inform which equipment you need for a detailled quotation, thank you. All ex stock available

Year of construction: 2021, condition: good (used), functionality: fully functional, 1 complete granulation line, partially overhauled and expanded in 2025, consisting of: Conveyor trough with screw (level-controlled) for 100% ground material or additive, feed screw with mixing paddle and color dosing, frequency-controlled Buffer silo for film with agitator and frequency-controlled rotary valve, as well as an agitator in the stuffing unit with load monitoring and reverse operation (adjustable) RCP horizontal stuffing unit 15 A for film and ground material, frequency-controlled. Extruder 120 mm - 38 LD - vacuum degassing (water ring) Year of construction 1996 - screw new in 2026 / heaters new / cooling fan new 180 kW - DC (frequency inverter 180 kW as a spare) Laser sieve Kitech with 60 mesh, diameter 350 mm Control via control cabinet, year of construction 2025 Strand die with 26 holes, closable and adjustable for different materials using variable screw-in nozzles Strand cooling water tank with new stainless steel bearings in plastic rollers Strand blower Strand granulator SG 200 Kitech, with 5 kW drive - frequency-controlled Granulate classifying sieve and conveyor blower with pipelines BIG BAG filling station with closure for Big-Bag change Commissioning by our technicians, details and costs upon request. Hedpfszb Dp Rjx Abfsfk Inspection in Wuppertal, appointment available on short notice.

Year of construction: 2021, condition: good (used), 1 complete granulation line, cutting/compacting/extruder combination, tangential, since 2021 only operated in a single shift using production waste, including DPE ground material/aluminum (pipe material). System consisting of: Hydraulic roller cutter, 140 cm width, for roller diameters up to 60 cm, 18.5 kW drive. Erema conveyor belt with metal detection bridge, 900 cm x 110 cm, with timer. Wagner WS30 shredder, 30 kW, rotor width 140 cm with hydraulic slide, rotor with 74 reversible cutting blades, discharge and inclined conveying screw. Roller feed for heavy rolls with cutting device in the longitudinal direction to relieve the mill, frequency inverter-controlled drive, 3.5 kW. Cutting mill with 11 kW, downstream for parallel operation with shredder/roller feed, suction/conveying fan to the buffer silo with agitator, frequency inverter-controlled for discharge rate/dust protection. Feed screw for ground material. Conveyor belt, L 9 m x W 80 cm, metal detection bridge, frequency inverter controlled via load detection from the cutting compactor. Conveying screw for 100% ground material, stainless steel, L 4.5 m and diameter 100 mm. Cutting compactor, 138 kW, frequency inverter controlled, suction fan, water spray cooling, tangential to extruder ES 180 mm 30 LD with 2-stage vacuum degassing, including: Laser filter LF with diameter 500 mm / 2-disc system, discharge screw for contaminants with timer, melt pressure sensor, spare screens: 60 mesh 2x, 70 mesh. Strand die, 26 holes - interchangeable dies, year of manufacture 2021, melt pressure sensor, complete overhaul/replacement of wear parts in January 2026. Hjdpfx Aozb Dr Sjbfefk Strand cooling water tank, L 700 cm x W 70 cm, stainless steel. Strand rollers made of plastic with stainless steel ball bearings, height-adjustable, year of manufacture 2023. Strand granulator SG 200 E with 7.5 kW as well as 1 spare granulator 5.5 kW for quick replacement during overhaul or cleaning/maintenance work. Granulate classification sieve, stainless steel, including conveying fan and pipes. BIG BAG filling frame, 2-place, with ladder and platform. BIG BAG floor scale with receipt printer. Throughput material-dependent, up to 900 kg/h. Start-up, commissioning by our technicians, details and costs upon request - after consultation. Inspection in Wuppertal, appointment can be arranged shortly.

Year of construction: 2003, condition: refurbished (used), Stock-No. 2086 twin-screw compounding extruder BERSTORFF type ZE 60 A - UT screw size 2 x 64 mm - 32 LDscrew speed up to 625 r.p.m. adjustable Capacity +/- 800 kg/h depending material specifications Drive from 197 kW up to 350 kW possible, optional by appoinment FLENDER gear-box L/D 34 - 40 LD , by appointment , due to your material formula needs 1x venting port new control board Hfsdpoh Eyduofx Abfsk optional - equipment against additional price: screen-pack-changer / melt-filtration unit pelletizing material feeding , loss-in-weight blenders pellet classifier screw configuration and more Please inform about your needs to send you a detailled quotation, thank you All ex our stock Wuppertal-Germany available

Year of construction: 2023, operating hours: 1,500 h, condition: excellent (used), functionality: fully functional, Abstracts This is a high-quality system that mixes and homogenizes up to 3 additives in a hot mixer. The control system is included in the scope of supply. First, the material is transported from the production area to a storage silo. From this first silo, the material is fed into the hot mixer, then into the cooler, and finally into a second silo for intermediate storage. After that, there is the option to directly fill the powder onto a big bag filling scale or to compress it into pellets using a pellet press and then fill them. The steel structure is included in the scope of supply. Where necessary, the system is designed according to ATEX standards. In the Documents section, you will find a detailed English and German description of the complete scope of this system. Do not hesitate to call us to discuss and demonstrate the system. A similar system can be inspected in Europe. Main machines: • Mixaco hot mixer HM3000 - 400 kW • Mixaco cooling mixer KM9000 - 90 kW • Steel structure • AZO feeding station and gravimetric dosing for 2 solids and 1 liquid • AZO 2 special dosing scales for difficult-to-flow powders or solids • AZO 4 transport line, pressure and vacuum conveying • AZO 2 metrologically verifiable big bag filling stations • AZO control system • Kreyenborg silos ATEX 15 m³ • Kahl pelletizer 37-850 – 132 kW with box cooler and accessories The system was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered at a port or in the production facility in Europe, EXW. Hfsdoztc Nfjpfx Abfjk The details for optimal transport need to be clarified. The machine price does not include packaging.

Condition: excellent (used), Year of construction: 2017, JUSTSEN/DANSTOKER Heating unit Max Heating output : 1 MW Alloweble pressure : 4,0 bar Alloweble temp : 110 celcius Test pressure : 6.0 bar Volume : 2200 litre Water cooling foundation Can be used for : Wood waste/wood chips/wood pellets etc. Hodpfxjzr E Hqs Abfjfk Electric cabinet with PLC touch screen Complete unit, still connected to power, can be examined in working condition on demand.

Condition: used, Year of construction: 2001, operating hours: 13,602 h, total length: 2,200 mm, total height: 1,100 mm, total width: 1,550 mm, Colour: Red Empty weight: 1.200 kg Price: On request - Details: Hodpezhr Tvjfx Abfsfk - └ Description: 400 volt take-up 48A fuse 63A - Year: 2001 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 600-229 - Operating hours: 13602 - Main motor power [kW]: 18,5 - Rotation speed [rpm]: 380 - Rotor width [mm]: 600 - Number of shafts [pcs.]: 2 - Opening width [mm]: 550 - Opening length [mm]: 50 - Sieve perforation [mm]: 20 - Number of rotating knives [pcs.]: 32 - Transport dimensions: 2200mm x 1550mm x 1100mm (l x w x h) - Transport weight [kg]: 1200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 844, PLEASE READ THE DESCRIPTION CAREFULLY Used IPF25 filling machine with integrated weigher for filling paper open-mouth bags, including bags with handles. The machine is suitable for processing a variety of bulk products, such as: Cat litter Pet food Charcoal Wood pellets Other dry bulk materials .... Bag dimensions: Width: 150 to 300 mm Length: 300 to 600 mm Side gusset: 35 to 85 mm Hfedpfxozrvldo Abfek The machine is currently in our workshop and is undergoing refurbishment. The refurbishment work will be carried out in stages. If you are seriously interested, we can expedite this process so that the machine becomes available sooner. Please feel free to contact us for additional information or to arrange a viewing.