Used Ath Heinl Wheel Lifter for sale (22,578)

Year of construction: 2023, condition: as good as new (ex-display), EXHIBIT DEVICE. High quality and robust short stroke lift with hydraulic drive, almost maintenance free. Powerful hydraulic unit (230V / C16A) Very low drive-over height of only approx. 105 mm No electrical limit switches installed in the scissors, protective hose over the hydraulic hoses Mechanical synchronization due to bottom cross connection and double hydraulic lowering lock (no safety catch or compressed air required) High lifting force already from zero point Emergency lowering system for lowering in case of power failure Ideally suited for paint and body stores, repairs, brake and tire services Color anthracite gray Lifting capacity 3 t Lifting height 960 mm Drive-up height 105 mm Length of rails 1.450 - 2.040 mm Bwjdpfen Armwsx Ad Asl Rail width 530 mm Drive power 2.2 kW Lifting/lowering time approx. 20 s Operating voltage 230V / C16A Foundation min. C20/25 2,500 x 2,500 x 180 mm Can be inspected and tested by appointment.

Year of construction: 2023, condition: as good as new (ex-display), Pneumatically controlled, without electrical components Tool holder for storing impact wrenches and sockets Bsdpon Atm Iefx Ad Aowl Catch hook to secure the wheels against falling down Lockable castors for locking the wheel holder Load capacity 65 kg Lifting height 1,2 m Min. height of the room 2,8 m

Year of construction: 2010, condition: used, Technical details: range of revolution per miute: 180 U/min voltage: 220/ 50 V/Hz machine weight approx.: 150 kg dimension machine xH: 1,2 x 0,8 x 1,3 m total power requirement: 550 kW Car tire balancing machine The balancing process is automatic with wheel braking. Program selection can be chosen between 11 balancing methods. Microprocessor controlled LED display with digital weight display. Center hole of rim Ø 40 - 154mm Shafts Ø 36mm Measuring speed 120 rpm. Measuring time 5 - 10 sec. Cone sizes: Ø 44 - 63mm; Ø 61 - 79mm; Ø 77 - 114mm; Ø 107 - 154mm Wheel dimension: Rim width: 1,5" - 18" RimØ max. 10" - 24" Bedpfxju Ic Ais Ad Aowl Wheel Ø max. 890mm Wheel weight max. 65kg *

Condition: used, Year of construction: 1987, functionality: fully functional, turning diameter: 1,500 mm, spindle speed (min.): 9 rpm, spindle speed (max.): 27 rpm, The UBC 150 is a high-performance wheel turning machine specifically designed for the re-profiling of railway wheelsets without the need for disassembly. Manufactured by Rafamet Year of manufacture 1987 Max working diameter, mm 700-1500 Wheelset axle length minimum, mm 1640 Wheelset axle length maximum, mm 3000 Bwedpfx Aeypbcwod Ajl Gauge of the wheelsets to be machined, mm 1435 Track width, mm 1435, 1524, 1676 Clamping diameter, mm 550-1350 Maximum tire width, mm 140 Spindle speeds, rpm 9 – 27 Feed speeds, mm/min 1,6 – 50 Total power required, kW 172 Machine dimensions, mm 8700 x 3600 x 3200 Machine weight, kg 59200

Year of construction: 1980, condition: excellent (used), Widht: 1000-1676 mm Axis lenght: 1327-2700 mm Diameter of the wheels: 460-1120 mm Axle diameter: 70-200 Bwodpenbfcrsfx Ad Aol XAD 112, more information on request

Condition: used, Year of construction: 1985, railwidht: from 1430mm - 1520mm Bwsdpfswzg Tgsx Ad Ael diameter range: ø700 to ø1120mm

Year of construction: 1997, condition: like new (used), UNDER FLOOR WHEEL LATHE RAFAMET UGB 150 Underground lathe for reprofiling train wheels without necessary disassembly Truck guage: 1435 mm Range of wheel tread diameters: 600 to 1,500 mm Maximum axle load: 250 kN Minimum wheel base: 1,700 mm Machine is from 1997 Dismantled, ready for shipment. Bwodpfx Adjg R Syho Ajl

Condition: excellent (used), Polish production Rafamet lathe for sale, efficient machine in good condition after employing electrics and management by Rafamet. The machine worked until the very end, currently disassembled loading machine. Technical data Track width (for normal version) - 1435 mm Track width (for special execution) - 1524 or 1676 mm Wheel diameter - 800-1500 mm Bwsdpfx Adomidwcj Ajl The minimum distance between the axes of the sets - 1500 mm Maximum axle clamping on the rails - 25 tons Rotation of drive rollers (stepless) - 15-82 rpm Circumferential speed of drive rollers - 7.5-43 mm/min Feeds of copying supports (stepless) - 0.95-34 mm / min Travel of external jacks - 540 mm/min Travel of hydraulic jacks - 410 mm/min Slide travel - 2300 mm/min Sliding rail travel - 9000 mm/min Weight including standard equipment 25 200 kg Installed power 83kW (after modernization 58kW)

Year of construction: 1977, condition: used, turning diameter 700-1500 mm clamping length 3000 mm guage width 1676 mm Control weight of the machine ca. 60 t Rafamet UBC 150 wheelset lathe for railway wheelsets Serial No.: 152 110 Year of manufacture: 1977 Machining range: Diameter from 700 mm to 1500 mm Gauge of the wheelsets to be machined in standard version: 1435mm Bwodpjuddglofx Ad Aol track widths: 1435mm , 1524mm , 1676mm Length of wheelsets to be machined: 1640-3000mm Running diameter of the wheelset: 700-1500mm Driving diameter: 350-1350mm Width of the wheelset tyre: up to 140mm Fork dimensions of the wheelset lathe_ 8700x360x3250mm Total installed power: 172kW Weight of the machine: 59200kg Speed of the setting movement Lifting and centring device: 2500 mm/min. Headstocks: 1320 mm/min. Quills: 550mm/min. Supports in the longitudinal direction: 1300 mm/min.

Condition: new, Year of construction: 2026, Advanced CNC lathe designed for refurbishment and precision machining of aluminium alloy wheels. This machine ensures professional surface finishing, damage removal and restoration of wheel appearance. Equipped with a CNC control system enabling quick programming of machining cycles with excellent repeatability and surface quality. Compact size and ergonomic design make it perfect for workshops requiring efficiency and precision in alloy wheel processing. Technical data MAXIMUM TURNING DIAMETER OVER BED 690 mm MAXIMUM WHEEL DIAMETER 28 inches SPINDLE NOSE A2-6 SPINDLE BORE 82 mm CHUCK manual Bsdpfx Aoycqlujd Aowl MAXIMUM SPINDLE SPEED 1500 rpm MOTOR POWER 6.5 kW

Year of construction: 1984, condition: ready for operation (used), Rafamet UBB 112/2 Wheel Tread Diameter Minimum 700 mm Wheel Tread Diameter Maximum 1120 mm Clamping length 540 - 1050 mm Wheelset Axle Length Minimum 1640 mm Wheelset Axle Length Maximum 2800 mm Bwjdpfxohvml Ie Ad Ajl Maximum Tire Width 150 mm Maximum Wheelset Weight 4000 kg Saddle Set Up Motion Speed 2000 mm/min Saddle Feed Maximum 2000 mm/min Main Drive Motor Power 80 kW Weight aprox 40000 kg

Condition: good (used), Year of construction: 2022, machine/vehicle number: 2210BE044456-036, Offer 26103 Technical data: - Operation via hand-held remote control with cable - Load capacity: 2000 kg - Platform size: 2500 x 820 mm - Minimum lift table height: 205 mm - Maximum lift table height: 990 mm - Lift stroke: 785 mm - Lifting speed with / without load: 25 / 15 mm/s - Lowering speed with / without load: 25 / 20 mm/s - Hydraulic drive: 400 V / 2.2 kW - Required space: approx. W 2580 x D 840 x H min. 250 mm Bsdpfjy I S Agex Ad Aswl - Weight: approx. 270 kg

Condition: good (used), Year of construction: 2021, Offer 26108 Bedpfxoyz Su No Ad Aewl Technical specifications: - Operation via wired hand-held remote control - Load capacity: 2000 kg - Platform size: 2500 x 820 mm - Minimum lift table height: 205 mm - Maximum lift table height: 990 mm - Lift stroke: 785 mm - Lifting speed with / without load: 25 / 15 mm/s - Lowering speed with / without load: 25 / 20 mm/s - Hydraulic drive: 400 V / 2.2 kW - Space required: approx. W 2580 x D 840 x H min. 250 mm - Weight: approx. 270 kg

Condition: good (used), Year of construction: 2021, machine/vehicle number: 2101-BE041437-014, Offer 26104 Technical data: - Operation via hand-held remote control with cable - Load capacity: 4000 kg - Platform size: 2500 x 820 mm - Minimum lift table height: 230 mm - Maximum lift table height: 990 mm - Lift/stroke: 785 mm Bodpeyz Scmjfx Ad Aewl - Lifting speeds with / without load: 25 / 15 mm/s - Lowering speeds with / without load: 40 / 35 mm/s - Hydraulic drive: 400 V / 2.2 kW - Required space: approx. W 2580 x D 840 x H min. 230 mm - Weight: approx. 360 kg

Condition: excellent (used), Load capacity approx.: 2 t Fork length: 770 mm Fork gap: 105 mm Fork width outside: 400 mm Total length: 1100 mm Bwedpfxsd D U Uao Ad Asl

Condition: used, Tote Bin Lifter for stainless steel meat bins Bwjdpfjym U Afox Ad Asl Lifting height: 2050 mm Total dimensions: 1050 mm x 900 mm x 2940 mm

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, FABO Bucket wheel washers are intended to maximize the support of various terms throughout the process, such as the maximum recovery of fines or maximum remove of fines with lower power capacity. Bwedpfx Adeyxz Rhe Aol Sand and water compound is supplied into the washing tank of bucket wheels and the sand is obtained and dewatered by impellers after washing. The dirty water enters the spiral tank for fine sand pressing, then the pressed fine sand is shifted into the bucket wheel tank by the gradually rotating spiral blade, the fine sand is carried out by the buckets, dewatered and discharged.

Condition: used, High lift pallet truck, pedestrian stacker, pedestrian stacker HANSELIFTER - Hanse-Lifter Type E-SDJ1016-01 Wide-track pallet truck Series. Year of construction 2014 Rated load capacity pedestrian stacker 1000 kg Load capacity special construction device GIESLER 200 kg Nominal lift height 1600 mm Fork length 530 / 770 mm Fork carriage width 950 mm Bwodpfx Adshxvuwj Asl Underride height of wheel arms 130 mm Operating voltage hydraulic unit 12 Volt Overall height 2160 mm Overall length 1650 mm Overall width 1860 / 1200 mm - Manual driving mode - Electro-hydraulic lifting device - adjustable track width from 950 to 1650 mm (width between the wheel arms) - 1 12 volt battery - separate charger 12 Volt, 15 Ampere - Steel fork carriage on the mast - Fork carriage special construction device GIESLER, load capacity 200 kg - Fork carriage made of aluminum plate with precision guide, lateral adjustment via clamping lever - Stainless steel forks, complete length 770 mm to swivel plate - Forks cannot be lowered to the ground due to special construction device (approx. 170 to 250 mm depending on track width) Dead weight 485 kg as good as new condition

Condition: good (used), 1 x Syspal column lifter type 600/scb-1480 for 200 and 300 litre eurobins. Located Wiltshire. UKFM1- 6623 Bwjdpfovq N Duex Ad Aol

Condition: new, functionality: fully functional, empty load weight: 4 kg, in original packaging, without any warranty whatsoever Bwodjyftbwjpfx Ad Ajl

Condition: used, Savage Bros Firemixer, Model S-92 Complete with bowl lifter, Model 0708-80 Bodpfjxtqwksx Ad Aowl Natural gas RPM 30-60 Power 415 volts

Condition: used, Itec Tote Bin Lifter / Tipper Tipping height adjustable from 1800mm to 2800mm Overall height 3000mm Bodpfx Adjwgnn Ne Aewl Floor mounted Stainless steel Complete with control panel

Condition: used, Year of construction: 2011, load capacity: 1,000 kg, lifting height: 800 mm, fuel type: electric, fork length: 1,150 mm, overall weight: 150 kg, total height: 1,350 mm, total length: 1,750 mm, total width: 550 mm, No. 04498 Electric high lift pallet truck Lifter HX10E 540 Used, year of construction 2011 Electric lift, manual drive Load capacity 1000 kg Fork length 1150 mm Maximum lift height 800 mm Battery 12 V Including charger EASYLOG 1210 Good condition, battery lasts approx. 1 week Bsdpfx Asxyx Tmed Aswl Made in Italy, CE-compliant Transport dimensions approx. 1750 x 550 x 1350 mm LWH Weight approx. 150 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, Smartlift glasslifter SL-280 in good working condition. Bwsdpjvx T Exofx Ad Ajl

Condition: new, functionality: fully functional, power: 11 kW (14.96 HP), Year of construction: 2025, A spiral-type sand washer machine, also known as a spiral sand washing machine or screw sand washer, is a piece of equipment designed for washing, classifying, and dewatering sand and other granular materials. This type of sand washer typically features a spiral or screw-shaped structure for the purpose of lifting, conveying, and washing materials. Here are key features and aspects of a spiral-type sand washer machine: 1. Spiral Structure: The core component of the machine is a spiral or screw-shaped structure, often enclosed within a tub or trough. This spiral impeller is responsible for lifting, conveying, and washing the sand as it rotates. 2. Tub or Trough Design: The spiral structure is usually housed within a tub or trough that holds the water and sand mixture. This design allows for efficient washing and separation of impurities from the sand. 3. Multiple Blades: The spiral impeller typically has multiple blades or flights that provide mechanical agitation to the sand, ensuring thorough cleaning. 4. Water Injection: Water is injected into the tub or trough to aid in the washing process. The combination of water and the rotating spiral helps to remove impurities from the sand. 5. Adjustable Weirs: Some spiral-type sand washers have adjustable weirs or gates that control the flow of water and the retention time of the sand in the machine, allowing for customization of the washing process. 6. Classification and Dewatering: Spiral sand washers often include features for classifying and dewatering the sand. This may involve the use of a separate compartment or mechanism for fine sand recovery and water drainage. Bedpeq Nf S Rsfx Ad Ajwl 7. Variable Speed: The rotational speed of the spiral can often be adjusted to optimize the washing process for different types of materials and particle sizes. 8. Capacity: The capacity of a spiral-type sand washer is influenced by factors such as the size of the machine, the pitch of the spiral, and the efficiency of the washing process. Different models are available to suit various production requirements. 9. Materials Handling: Spiral sand washers are commonly used in applications such as aggregate processing, mining, concrete production, and other industries where the removal of impurities from sand is essential. 10. Ease of Maintenance: Many spiral-type sand washers are designed for easy maintenance, with accessible components and inspection points. Spiral-type sand washer machines are efficient tools for cleaning and processing sand, ensuring that the final product meets quality standards for use in construction, concrete production, and other applications. The specific features and capabilities of these machines can vary between different models and manufacturers.