Used Atn Vario for sale (673)

Condition: used, Year of construction: 2009, Offered here is a soldering robot from ATN Berlin. This is the "Vario" model. Component feeding is realized via exchangeable cassettes. The soldering process uses induction, making it a contactless soldering method. Tedpfjy Slkfsx Ahmoc

Condition: excellent (used), Year of construction: 2020, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 202007-047, Water jet cutting system for processing foils, foam materials, and non-ferrous metals. Equipped with 4 parallel cutting heads and 2 printing units for applying texts such as serial numbers, etc. The machine was used for cutting sealants and aluminium foils in prototype production. Low operating hours due to no series production and single-shift operation only. The system is fully operational and can be inspected at any time. Tsdpfoxqmkhex Ahmjc

Condition: excellent (used), Vacuubrand Chemical Diaphragm Pump Here, we offer a Vacuubrand chemical diaphragm pump. VACUUBRAND VARIO Chemical Diaphragm Pump MV 10C EX VARIO Technical data: Max. pumping capacity 50Hz 8.1 m³/h Ultimate vacuum 2 mbar / 1.5 torr Ultimate vacuum with gas ballast 10 mbar / 7.5 torr Number of cylinders 8 Number of stages 4 Vacuum display / controller type without controller Ambient temperature, lower limit, operation, in °C 10°C Ambient temperature, upper limit, operation, in °C 40°C Ambient temperature, lower limit, storage, in °C -10°C Tedpfozgci Sox Ahmec Ambient temperature, upper limit, storage, in °C 60°C Max. outlet pressure absolute in bar 1.1 bar Suction-side connection small flange KF DN 25 Pressure-side connection small flange KF DN 16 Rated power in kW 0.5 kW Minimum speed VARIO in min-1 30 min-1 Maximum speed in min-1 1500 min-1 Nominal speed in min-1 1500 min-1 IP protection class according to IEC 60529 IP 54 Dimension L in mm 560 mm Dimension W in mm 457 mm Dimension H in mm 410 mm Weight in kg 61 kg Noise (sound pressure level) in dBA at 50 Hz or 1500 rpm/62% (VARIO)/1500 rpm (VARIO-SP)/12500 rpm (VACUU·PURE®) 42 dBA EX approval pumping chamber (pumped gases): II 2G Ex h IIC T3 Gb X, outdoor area with inert gas purging: II 2G Ex h IIB T4 Gb X, outdoor area without inert gas purging: II 3G Ex h IIB T4 Gc X, motor: II 2G Ex db IIB T4 Gb NRTL certification No Nominal voltage range 1 (in V) 230 V Mains frequency voltage range 1 (in Hz / DC) 50 Hz Weight 61 kg Type: MV 10C EX VARIO Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Year of construction: 2015, fuel type: diesel, Weights Empty weight: 5.250 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 1.230 cm Dimensions of cargo space: 610 x 200 x 208 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 720 m Additional information Please contact Christian Theißen for more information Manufacturer: ATN Model: Zebra12 Year of build: 2015 Condition: Used Tjdpfx Aoywr Etehmjc Data: Max. working height: 12,30 m Movable up to working height: 12,30 m Platform height: 10,30 m Max. reach: 7,20 m Platform lifting capacity: 230 kg Platform dimensions LxW: 1,52 x 0,87 m Transport dimensions LxWxH: 6,10 x 2,00 x 2,08 m Drive type: Diesel Empty weight: 5.250 kg Special features: Rotatable work basket, basket arm, pivot axis, solid rubber tires, PPE anchor points available.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, lifting height: 1,000 mm, lifting power: 200 kg/m, fuel type: electric, Equipment: UVV, Transport and trade-in possible by arrangement. Tsdsytn Etopfx Ahmsc

Condition: used, Year of construction: 2016, fuel type: electric, Please contact Gebrauchtgeräte Center for more information Tedpfx Aozfn Rfjhmoc

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 2,368 h, power: 26 kW (35.35 HP), load capacity: 230 kg, lifting height: 16,400 mm, Equipment: all wheel drive, Diesel-powered, all-wheel-drive articulated telescopic boom lift ATN ZEBRA 16 Year of manufacture: 2017 According to the meter: 2,368 hours 16.4 meters working height 9.4 meters lateral reach 26 kW Kubota engine ALL-WHEEL DRIVE - Articulated boom Todpfx Aozb Etkjhmsc - Telescopic boom - Immediately ready for use - Upon request: new Austrian inspection certificate provided before delivery! Selling price: €16,900 net Affordable delivery also possible!

Condition: used, Year of construction: 1999, operating hours: 19,500 h, functionality: fully functional, machine/vehicle number: 85525, travel distance X-axis: 1,760 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, type of input current: three-phase, total width: 2,900 mm, total height: 3,100 mm, total length: 3,800 mm, table length: 2,030 mm, table width: 500 mm, table load: 900 kg, tank capacity: 290 l, tool length: 250 mm, tool diameter: 180 mm, Equipment: documentation/manual, rotational speed infinitely variable, 4 axes 36 tool stations SK40 Tjdpfsxup Iqsx Ahmec Pendulum operation with partition wall 2x swiveling bridges Coolant tank 290 l with belt filter Control unit Heidenhain TNC 410 MA A-drive RTA 200/300

Condition: like new (used), Year of construction: 2015, functionality: fully functional, Kilia Bowl Cutter 50 Litres Meister Plus Vario with Hand and Knee Operation Condition: Factory reconditioned with 6 months warranty. The Kilia 50 litre Meister Plus Vario is a powerful universal high-speed bowl cutter for the production of fine and coarse sausage products as well as many other products. The machine impresses with its compact design, high-quality stainless steel construction and modern, infinitely variable drive technology for precise mixing and cutting. The machine is equipped with a 6-knife head, infinitely variable knife shaft drive with forward and reverse operation, infinitely variable bowl drive, electric knife shaft brake, temperature cut-off, revolution counter with automatic stop, central lubrication for the knife shaft and plate shaft bearings, as well as a 7-inch touch display as an alternative operating solution. In addition, the machine features hand control and knee control for particularly practical and ergonomic operation. The noise protection cover is included, and the knife cover is manually operated. An electric knife cover drive is optionally available. Technical Data: Bowl volume: 50 l Capacity: approx. 35 kg Knife speed mixing/cutting: 50 to 5,100 rpm Reverse knife shaft operation: 50 to 500 rpm Knife tip speed: up to 97 m/s Bowl speed: 7 to 20 rpm Knife drive: infinitely variable Bowl drive: infinitely variable Time/revolution cut-off: yes Temperature cut-off: yes Central lubrication: yes Remote control: yes Touch control / hand control / knee control: yes / yes / yes Hydraulic knife cover drive: – Hydraulic ejector: – Manual ejector: – Recipe manager KPV: optional Scale: optional Standard Electrical Data: Tjdpezcux Sefx Ahmec Knife shaft drive power: 12 kW Bowl drive power: 1.5 kW Voltage: 400 V Frequency: 50 Hz Customer-side pre-fuse: 32 A

Condition: good (used), Year of construction: 2022, operating hours: 85 h, mast type: telescopic, fuel type: electric, Drivetrain Drive: Wheel Weights Empty weight: 5.140 kg Functional Lifting capacity: 200 kg Working height: 1.270 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Todpfezh Tdiox Ahmec Other information Remanufactured: Yes Max. horizontal reach: 605 m Transport dimensions (LxWxH): (L/B/H): 3,72m / 1,20 m / 1,98 m Additional information Please contact Tobias Mayr for more information

Condition: good (used), Year of construction: 2020, operating hours: 1,550 h, axle configuration: 4x4, fuel type: diesel, Equipment: all wheel drive, Drivetrain Drive: Wheel Make of engine: Kubota Weights Empty weight: 5.250 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 1.200 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: good Todpfxozd Nwke Ahmoc Visual appearance: good Other information Remanufactured: Yes Max. horizontal reach: 850 m Transport dimensions (LxWxH): (L/B/H): 6,06m / 1,99 m / 2,12 m Additional information Please contact Tobias Mayr for more information

Condition: used, Year of construction: 2021, operating hours: 1,174 h, load capacity: 200 kg, empty load weight: 2,850 kg, fuel type: electric, ATN Piaf 10RE. Year of manufacture: 2021. Operating hours: 1174. Working height: 10 meters. Lateral reach: 3.5 meters. Working weight: 2850 kg. Working width: 100 cm. 24-volt batteries. Integrated charger: 230 volts. Video available via WhatsApp. Todpfsz A If Ijx Ahmoc Minor damage to the side cover; see the last photo. Price: net + 21% VAT or net for export with VAT number. We speak Dutch. We speak German. We speak English. Our general terms and conditions apply to all transactions! Machines are sold EX Works Winterswijk (Netherlands) in as-is condition!

Condition: used, Year of construction: 2018, operating hours: 640 h, load capacity: 200 kg, empty load weight: 2,980 kg, fuel type: electric, ATN Piaf 1000R. Year of manufacture: 2018. Working height: 10 meters. Lateral reach: 3.40 meters. Working weight: 2980 kg. 24-volt battery. Integrated charger: 230 volts. Video available via WhatsApp. Price net + 21% VAT or net export with VAT number. We speak Dutch. Tedpfx Ahjz Dbwtomjc We speak German. We speak English. Our general terms and conditions apply to all transactions! Machines are sold EX Works Winterswijk (Netherlands) in as-is condition!

Condition: good (used), Year of construction: 2020, operating hours: 1,307 h, axle configuration: 4x4, fuel type: diesel, Equipment: all wheel drive, Drivetrain Drive: Wheel Make of engine: Kubota Weights Tsdpfx Ajzp Uhrjhmsc Empty weight: 5.250 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 1.200 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Other information Remanufactured: Yes Max. horizontal reach: 850 m Transport dimensions (LxWxH): (L/B/H): 6,06m / 1,99 m / 2,12 m Additional information Please contact Tobias Mayr for more information

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, overall weight: 392 kg, total width: 1,500 mm, total length: 4,000 mm, cutting height (max.): 250 mm, type of input current: three-phase, space requirement length: 4,000 mm, space requirement width: 1,500 mm, rotational speed (max.): 6,670 rpm, rotational speed (min.): 6,670 rpm, spindle speed (min.): 6,670 rpm, spindle speed (max.): 6,670 rpm, power of the milling unit: 6,000 W, length stop: 3,000 mm, working width: 500 mm, working height: 250 mm, input voltage: 400 V, power: 6 kW (8.16 HP), Mafell ZAF 250 - EXCELLENT CONDITION Scope of delivery: -1 milling head, complete with reversible blade; -1 support table Maximum wood dimensions (W x H) rectangular: 500 x 250 mm Maximum wood dimensions (W x H) 60°: 220 x 250 mm Length of the support with scale: 3000 mm Feed rate: 0.9 - 2.2 m/s Installation area: 1.5 x 4 m Nominal idling speed: 6670 rpm Nominal power: 6000 W Weight: 392.1 kg Three-phase motor: 400 V / 50 Hz Product details: -With the ZAF 250 Vario, all tenon shapes can be produced quickly and accurately, efficiently and with a perfect fit. - Straight tenons, angled tenons, corner and mortise joints - the compact ZAF 250 Vario is the right choice. - Using a stop, the exact length scale can be adjusted. -The milling tool, specially developed for the ZAF 250, can be quickly adapted to different tenon lengths and for milling joints. -The ZAF 250 Vario has precise adjustment options and a clear control panel. Thanks to the built-in laser, you can position the wood accurately. Result: Milling with millimeter precision in any type of wood! -After the tenon geometry has been set, the milling head automatically follows the shape of the tenon and delivers the desired tenon - including surface milling, chamfering and beveling. -The ZAF 250 Vario has an adjustable feed rate for applications in hardwoods. Application area: -Tenon and mortise milling up to 60° -Material usage, e.g.: solid wood and glued laminated timber Tsdjzbnl Aspfx Ahmjc Advantages: -Significant time saving - due to simple and quick adjustment of length, angle and tenon and mortise dimensions. - Maximum wood dimensions 500 x 250 mm at 0° and 220 x 250 mm at 60°. -Minimal space requirement – thanks to the swiveling head, the workpiece always remains in the same position. -No wood waste - fully dust-extractable.

Condition: used, Year of construction: 2019, operating hours: 1,893 h, load capacity: 200 kg, empty load weight: 2,850 kg, fuel type: electric, ATN Piaf 10E. Year of manufacture: 2019. Operating hours: 1893. Working height: 10 meters. Lateral reach: 3.5 meters. Working weight: 2850 kg. Working width: 100 cm. Tjdpfszzgbzjx Ahmsc 24-volt batteries. Integrated charger: 230 volts. Video available via WhatsApp. Price net + 21% VAT, or net for export with VAT number. We speak Dutch. We speak German. We speak English. Our general terms and conditions apply to all transactions! Machines are sold EX Works Winterswijk (Netherlands) in as-is condition!

Year of construction: 2017, condition: excellent (used), Tube cutting system with optical laser mark detection The FZH Vario Flex is a fully automated tube cutting system. It is specifically designed for the precise, reliable cutting of stainless steel tubes (e.g., for fuel, brake, air conditioning, or hydraulic lines). The system features optical laser mark detection. The control panel allows the user to select whether the cut is triggered mechanically (e.g., at the back of a union nut) or fully automatically via optical detection of a laser mark applied to the tube. Thanks to an integrated rotating 3-jaw cutting head and a micro-spray unit (minimum quantity lubrication), the machining process is extremely gentle on the tools. The tubes remain almost completely dry and free of heavy soiling. Tsdpfezw Ukcex Ahmoc The entire process—from loading and clamping to cutting and unloading—is highly automated and follows a material-friendly cycle. Fully integrated labeling and traceability system: The system is designed to meet modern quality standards (Industry 4.0 / automotive). Following the cutting process, a barcode label is automatically generated, assigned, and printed to ensure seamless part traceability (tracking and system logging are directly integrated). Equipped with two separate bin discharge stations (rear-facing hatches with sliding doors), the system automatically switches to the second station when a bin is full. Finished KLT bins can be removed while the machine continues to operate, without interrupting the production cycle. Technical Data & Capacities Maximum tube length (feed): 1,000 mm Material specification: Optimized for stainless steel tubes (including those with pre-assembled union nuts or flared ends) Sensors & positioning: Optical sensors for automatic detection of laser markings on the workpiece Feed system: Automatic drum magazine / vertical disc feeder (for manual or automatic loading) Length adjustment: Continuously adjustable for different tube lengths via a manual handwheel Cutting method: Chip-removing sawing / rotating cutting head with three-jaw clamping and cutting mechanism (up to 600 rpm) Coolant/lubrication system: Integrated micro-spray unit (MMS) for minimum quantity lubrication Control system: Siemens SIMATIC HMI industrial PC with TFT monitor, keyboard, and mouse Setup mode: Mobile Siemens teach-in terminal for manual axis configuration and position storage Integrated labeling and barcode printing system Enclosure: Aluminum profile system with safety Makrolon panels Logistics / Output Integrated bin deposit station 2 separate bin output stations for rear-side removal via protected interlock systems with sliding doors Suitable for standardized KLT containers (600x400 mm and 400x300 mm) Manufacturer: FZH Engineering GmbH Type / Platform: Vario Flex Year of manufacture: 2017 Material: Stainless steel Cutting head: Vario Flex Special features: Tubes with union nuts Diameter: Ø 6–76 mm Output length: L = 150–1,000 mm Cutting based on laser marking Wall thickness: 1 to 1.3 mm Condition: The system is in good visual and mechanical condition in excellent, clean condition. “Everything from a single source: We would be happy to offer you suitable bank financing for your project.” komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Equipment: CE marking, Fully functional, in very good technical and optical condition. Year of manufacture : 2017 The set contains: EUROMAT B5 / B10 VARIO oven + 2 loading spaces. Baking Sheets/Tray - Accessories. Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. Payment in cash, possible upon delivery on site. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. Please contact us before purchasing. We issue intra-community invoices - excluding VAT. Todpfx Ahez Aag Hsmsc opening hours Mon-Fri: 8 a.m.-4 p.m.

Condition: used, mileage: 181,811 km, power: 130 kW (176.75 HP), first registration: 03/2011, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 09/2027, color: white, gearing type: mechanical, emission class: euro5, number of seats: 5, loading space length: 3,100 mm, loading space width: 2,030 mm, loading space height: 350 mm, Year of construction: 2011, Equipment: parking heater, * Vehicle number for customer inquiries: 4849 * Entry-side rotating door on the right with sliding window * Differential lock, rear axle * Environmental badge (green) * Double seat for passenger compartment, right side * Trailer coupling, ball-type, low * Cross member reinforced, without trailer coupling * Warm water auxiliary heater * Double seat for passenger compartment, left side * Passenger seat, two-seater * Engine version Euro V * Entry-side rotating door on the left with window * Airbag, driver * Driver's seat, hydraulically adjustable, "Isringhausen" * MB-NA 56-2c, i=0.98 - left of the front drive shaft * Electric window lift, driver and passenger door * Trailer socket, 13-pole * Trailer socket, 7-pole * Entry-side rotating door on the right with window * Five-seater * Engine brake, pneumatically operated * Tachograph, digital, EG * Exterior mirror, electric, driver's side * Stabilizer, rear axle, reinforced, mounted under the frame * Tipping platform 3100x2200x350 * Driver comfort package * Meiller pump, 5-piston, type 254/1 * Brake system, hydraulic 2-circuit / pneumatic 2-circuit * 4/5-door No liability for printing and typographical errors Sale only to commercial customers Errors and prior sale reserved * Changes, prior sale and errors expressly reserved. The description serves to identify the vehicle and does not constitute a guarantee in the legal sense. The description in the purchase agreement is binding. * TOP SERVICE + QUALITY * We would be happy to provide you with a LEASING, FINANCING, or HIRE PURCHASE offer. Tsdpfxez H Dxfs Ahmoc * Guarantee insurance is possible upon request from the insurance company * TÜV / UVV LBW / Tachograph inspection and installation of OBU device by our local partners * Customs license plate for 30 days * All customs documents for export are available, but must be requested individually * TOLL for Toll-Collect can be booked in-house * Free transfer from Stuttgart Airport or Metzingen (Württ) train station * TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WhatsApp number * * ---- Visit us on our website at * Constantly over 200 vehicles in stock

Condition: used, mileage: 181,811 km, power: 130 kW (176.75 HP), first registration: 03/2011, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 09/2027, color: white, gearing type: mechanical, emission class: euro5, number of seats: 5, loading space length: 3,100 mm, loading space width: 2,030 mm, loading space height: 350 mm, Year of construction: 2011, Equipment: parking heater, * Vehicle number for customer inquiries: 4849 * Entry-level swivel door on the right with sliding window * Differential lock, rear axle * Environmental badge (green) * Double seat for passenger compartment, right side * Trailer coupling, ball-type, low * Cross member reinforced, without trailer coupling * Auxiliary water heater * Double seat for passenger compartment, left side * Passenger seat, two-seater * Engine type Euro V * Entry-level swivel door on the left with window * Airbag, driver * Driver's seat, hydraulically adjustable, "Isringhausen" * MB-NA 56-2c, i=0.98 - left of the main shaft * Electric windows, driver and passenger side * Trailer socket, 13-pin * Trailer socket, 7-pin * Entry-level swivel door on the right with window * Five-seater * Engine brake, pneumatically operated * Tachograph, digital, EG * Exterior mirror, electric, driver's side * Stabilizer, rear axle, reinforced, mounted under the frame * Tilting bridge 3100x2200x350 * Driver comfort package Tedpfx Ahez H Dw Uemsc * Meiller pump, 5-piston, type 254/1 * Brake system: hydraulic 2-circuit/pneumatic 2-circuit * 4/5-door No liability for printing and typographical errors. Sales only to commercial customers. Subject to errors and prior sale. *Changes, prior sale and errors expressly reserved. The description serves to identify the vehicle and does not constitute a warranty in the legal sense. The description according to the purchase contract is decisive. * TOP SERVICE + QUALITY * We would be happy to provide you with a LEASING/FINANCING/RENT-TO-OWN offer. * Guarantee insurance can be arranged with the insurance company upon request. * TÜV/UVV LBW/Tachograph inspection and installation of OBU device by our local partners. * Customs license plates for 30 days. * All customs documents for export are available, but must be requested individually. * TOLL fees for Toll-Collect can be booked in-house. * Free transfer from Stuttgart Airport or Metzingen (Württemberg) train station. * TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * ---- Visit us on our website at * Over 200 vehicles constantly in stock.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Equipment: documentation/manual, refrigerant dryer, type plate available, Container includes the following contents: - 10ft storage container, new / Color: Anthracite grey Tedpfxjxc T Eve Ahmoc - SSC-Strong 37 Vario • Speed-controlled screw compressor • Free air delivery at 8 bar: 6.3 m³/min • Dimensions (LxWxH): 1432 x 1000 x 1480 mm • Weight: 705 kg - 2 compressed air tanks, 500 l each o With AD2000 certification o Horizontal design - 2 Ecomat 31 condensate drains - 2 sets of fittings - SCC refrigerant dryer DRA480 o ISO 8573-1 Class 4 o Refrigerant: R407C o Capacity: 480 m³ - Pre-filter FIL934-P - Fine filter FIL934-M The compressor has seen very little use and therefore has low operating hours. Upon request, we can read the operating hours and run the compressor for demonstration.

Condition: used, Year of construction: 2007, machine/vehicle number: IntNr231675, A high-performance MIKRON UCP 600 Vario 5-axis universal machining center, manufactured in 2007, is for sale. Technical data Working area Travel in X-axis: approx. 600 mm Travel in Y-axis: approx. 450 mm Travel in Z-axis: approx. 450 mm Number of CNC axes: 5 5-axis machining: yes Rotary/swivel table: NC-controlled Rotary/swivel table Table diameter: approx. Ø 450 mm Tjdpez E N T Ssfx Ahmoc Max. workpiece/table load: approx. 200 kg B-axis / swivel range: approx. -115° to +30° C-axis / rotary range: 360°* Main spindle Tool interface: HSK-A63 Max. spindle speed: up to approx. 20,000 rpm Spindle hours: approx. 15,015 h Tool changer Automatic tool changer: available Tool interface: HSK-A63 CNC control Control manufacturer: HEIDENHAIN Control: iTNC 530 Coolant system Chip conveyor Mains voltage: approx. 400 V / 50 Hz The machine can be inspected by appointment. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2021, operating hours: 629 h, 2021 | ATN CX15 | Used Scissor Lift | 629 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 14400 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 39 inspection points 37 approved ✅ 2 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The basket is in very good condition, used in rentals but with very few hours. The high control station is brand new, the set remains in good condition. 📄 Want to see the full inspection, extra photos, or a video? Tsdpfx Ahjzpakxjmec Tip: The reference "41158 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 220 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 150 mm, number of axes: 3, Gantry milling machine manufactured in 2016. This ISEL ATN Vergusssystem 3 features a robust assembly with X, Y, and Z-axis components, along with a PC control system equipped with a monitor, keyboard, and mouse. The machine offers travel ranges of approximately 220 mm in X, 500 mm in Y, and 150 mm in Z. If you are looking to get high-quality milling capabilities, consider the ISEL ATN Vergusssystem 3 machine we have for sale. Contact us for further details. - CNC Potting & Dosing System- Machine 1: 0 hours- Machine 2: approx. 20 hours- Machine 3: approx. 500 hours- 3 machines in total- Components per Machine: ISEL machine base frame with X, Y, Z-axis assembly, PC control system with monitor, keyboard and mouse- Loose Accessories: None (all components are assembled together)- External Dimensions: 4 m wide x 1.4 m deep x 2.6 m high (one machine is smaller due to the Y-axis configuration)- Axis data specified for each machine:- Travel Ranges: Approx. X- 220 mm, Y- 500 mm, Z- 150 mm- PC Processor / CPU: Intel(R) Core(TM) i3-2120 CPU @ 3.30GHz- PC Memory / RAM: 4096 MB DDR3 1333- BIOS: American Megatrends Inc. RX67QV BIOS Ver 1.05- Software Included: ISEL Remote program (for programming travel paths), ATN software (for programming movements with dosing times for casting/potting systems, e.g., Hilger & Kern), WinControl- Linear Drive Motor / Actuator Specs: Iselgermany EC-LES Spindelantrieb, 135W / 48V- Linear Module Type: Isel Linear-Einheit LES 4 Tedpfx Ahezw H Efjmec

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 7,225 h, power: 121.36 kW (165.00 HP), fuel type: diesel, first registration: 04/2013, next inspection (TÜV): 12/2026, Equipment: air conditioning, front power take-off, Manufacturer: Fendt Model: 716 Vario Plus Type: Tractor First registration: 04/25/2013 MOT: 12/2026 Used, with signs of wear, good condition Power: 165 hp Four-wheel drive: yes Air brake system: yes Front tires: Trelleborg 540/65R28 Operating hours: 7225 Front PTO: yes Automatic hitch: yes Transmission type: Vario Air conditioning: yes Front hydraulics: yes Tjdpfx Ahsz Hx E Hjmoc Number of cylinders: 6 Suspended front axle: yes Cab suspension: pneumatic The stated price includes 19% VAT. An invoice will be issued upon purchase. Upon request, we will gladly send you further information regarding the equipment. We recommend an inspection before purchase. Sale expressly excludes any liability for material defects. No guarantee, no warranty, sold as seen. Information without guarantee Details, information, and technical data from the manufacturer To avoid any possible misunderstandings regarding the condition of the item and the scope of the auction, we generally recommend an inspection BEFORE placing a bid! Further technical data can be requested from the manufacturer. Our business hours are from Monday to Friday between 8:30 a.m. and 12:00 p.m. and 1:00 p.m. and 4:30 p.m. During this time, inspections and collections are possible and desired, AFTER prior appointment. Subject to prior sale, changes, errors and printing errors.