Used Beba Mit Rührstab for sale (7,175)

Condition: used, Compulsory mixer, agitator, mixer, mixing tool -wherever electrical mixers are not permitted -Nominal consumption: watts Lodpfjcm I Uhex Am Njaa -Speed: rpm -with: stirring stick -Number: 2x agitators available -Price: per piece -Dimensions: 470/330/H900 mm -Weight: 14 kg

Condition: good (used), Compulsory mixer, agitator, mixer, mixing tool, stirrer -wherever electrical mixers are not permitted -Nominal consumption: watts -Speed: rpm -without: stir stick -Number: 3x stirring devices available -Price: per piece -Dimensions: 450/300/H460 mm Ljdpfx Aocm I Unjm Nsaa -Weight: 14 kg

Condition: good (used), Forced-action mixer, agitator, stirring device, mixing tool, pneumatic hand mixer, pneumatic agitator -Agitator: Pneumatically operated, unfortunately no type designation -Speed: adjustable -Stirring rod: Ø 140 x 600 mm Lsdpfxogua Hdo Am Neaa -Overall dimensions: 300/140/H830 mm -Weight: 6 kg

Condition: used, mileage: 715,169 km, power: 345 kW (469.07 HP), first registration: 10/2013, fuel type: diesel, overall weight: 27,000 kg, axle configuration: 3 axles, color: red, gearing type: automatic, emission class: euro5, total width: 2,550 mm, total height: 3,850 mm, loading space length: 7,500 mm, loading space width: 2,400 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, According to our "General and Stipulated Terms and Conditions" and without any guarantee or warranty, we can offer you the following vehicle today, subject to prior sale, errors, and typographical mistakes, and non-binding until conclusion: Laodpfxoyx N Izj Am Noa Volvo FH 460 Globe Flatbed with Joloda Floor and Palfinger Rear Crane (Vehicle 444) First registration: 10.10.2013 715,169 km Engine: 12,777 cc 345 kW / 460 hp Euro 5 EEV Gross vehicle weight rating: 27,000 kg, unladen weight: 14,250 kg, payload: 12,650 kg Gross train weight: 44,000 kg Overall length: 10,700 mm, overall width: 2,550 mm, overall height: 3,850 mm Internal dimensions: approx. 7,500 mm (L) x 2,480 mm (W) x 600 mm (H) Drop sides, each divided into 2 sections per side, approx. 600 mm high 4 longitudinal and 10 cross locking bars on the loading floor for load securing using the Joloda system with locking wedges 8 pairs of lashing eyes in the outer frame Strap hooks on the lower rail Perforated outer frame on top HEKLA body 1 pair of LED work lights at the top behind the cab for illuminating the cargo area Rear crane Palfinger PK16001K B Power Link Plus with 3 hydraulic extensions, lifting hook Control from below and via remote control Battery charger for crane remote control located below the passenger seat 2 hydraulic rear supports 2 LED reversing lights, trailer coupling + reversing camera at rear Tires: 1.) 385/55R22.5 approx. 40/50%, 2.) 315/70R22.5 approx. 70/70%, 3.) 315/70R22.5 approx. 70/70%, spare wheel approx. 80% 3rd axle is a lift axle Large diesel tank passenger side One large plastic toolbox on each side, mid-position Central locking with remote control Roof spoiler Stationary air conditioning Sun visor LED daytime running lights Additional spotlights Sleeper cab with 2 beds 2 x electric windows, mirrors, heated mirrors Multifunction steering wheel Cruise control VEB brake Radio/CD Air conditioning, auxiliary heater, stationary air conditioning Lift axle control I-Shift Driver seat heating Price: €28,500 (net) All information is provided without guarantee or warranty. Our "General and Stipulated Terms and Conditions" apply. Place of jurisdiction for both parties up to a dispute value of €10,000 is the District Court of Ludwigslust, and for higher values, the Regional Court of Schwerin. Subject to errors, typographical mistakes, and prior sale.

Condition: ready for operation (used), Getriebebau Nord SK71L/8-2 engine with SK12063AZ-71L/8-2 gearbox SN: 201892085-100, used, good condition, 100% functional, scope of delivery as per photos Ledpfxst Rmztj Am Neaa

Condition: new, Cantilever rack, new H: 400cm, base +3 storage levels with roof & rear panel Free delivery within Germany, except islands Data : - H : approx. 400 cm - D : approx. 147 cm - L : approx. 1420 cm - Cantilever arms : approx. 125 cm - Axial dimension: 290 cm (can be adapted to customer requirements) - New goods - made in Germany. - Delivery time approx. 6 weeks after commercial clarification. - 1000 kg load per arm - 4000 kg load per upright - Uprights in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are bolted. - Arms adjustable in 200 mm increments. - Levels: Base + 3 storage levels (4 storage levels) Shelf consists of : - 06 x uprights, incl. base approx. 400 cm made of IPE270. - 18 x cantilever arms approx. 125 cm made of IPE 120. - 06 x roof girder approx. 150 cm made of IPE 120, 5° rising roof pitch. - incl. roof and rear wall material. - incl. all necessary connecting elements and screws. Why BLT cantilever racks ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load. - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - Long after-sales guarantee - The upright base and upright back are welded together, providing additional safety and short assembly times because the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, therefore no weakening of the upright profile. Price : 12.250,00 € net plus statutory value added tax. Lasdpoy D Sxajfx Am Nea You will receive an invoice with VAT shown. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your operating equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2024, functionality: fully functional, carrying capacity per cantilever arm: 140 kg, shelf height: 2,500 mm, total length: 3,150 mm, total height: 2,500 mm, axle spacing: 1,030 mm, load capacity per stand: 1,120 kg, approx. 3.15 running meters Cantilever rack with shelves 60 cm deep H: 250 cm 140 kg/arm META Multistrong Data : - H : approx. 250 cm - D : approx. 81 cm - L : approx. 315 cm - Cantilever arms : approx. 60 cm - Axial dimension : 103 cm - NEW GOODS immediately from stock. Laedpfsy D Stkjx Am Noa - 140 kg load per arm - 1120 kg load per upright - Uprights in RAL5010 (gentian blue). - Cantilever arms in RAL5010 (gentian blue). - Arms are hooked in and secured with locking bolts. - Arms adjustable in 70 mm increments. - Levels: Base + 4 storage levels (5 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 250 cm made of IPE120. - 16 x cantilever arms approx. 60 cm made of rectangular profile 40 x 30 mm. - 12 x META shelf, approx. 100 x 60 cm - incl. all necessary connecting elements and screws. -- Available immediately Price : 1765,00 € net 2100,35 € gross You will receive an invoice with VAT included. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Year of construction: 2026, condition: new, Our KVK 1A is the almost identical sister model to the KVK 2 (MA), i.e. a semi-automatic stretch wrapper with turntable which, in comparison to the KVK 2 MA, is equipped with a cut-out for ground-level access with a hand pallet truck. The only thing that still has to be done manually with this wrapper is feeding and cutting the film. With a weight of 700 kg, this model is also designed for professional use and can be loaded up to 1500 kg. The 1A has a turntable of 1500 mm and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and film carriage, as well as an electromagnetic brake that can be very finely adjusted via potentiometer, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. If the winder needs to be used at a different location in between, it can be easily lifted and moved with a forklift using the integrated cut-outs. In addition to a photocell for detecting dark packages or black film, the wrapping height of the KVK 1A can be varied as an option (up to 3200 mm). Recommendation The KVK 1A is ideal if no ramp can be used for space reasons or if particularly heavy or unstable packaged goods are not to be pushed onto the turntable via a ramp. For further information, we have attached the technical data sheet as a PDF to this advertisement! Lsdsy Drhzjpfx Am Nsaa

Year of construction: 2026, condition: new, Our KVK 1A is the almost identical sister model to the KVK 2 (MA), i.e. a semi-automatic stretch wrapper with turntable which, in comparison to the KVK 2 MA, is equipped with a cut-out for ground-level access with a hand pallet truck. The only thing that still has to be done manually with this wrapper is feeding and cutting the film. With a weight of 700 kg, this model is also designed for professional use and can be loaded up to 1500 kg. The 1A has a turntable of 1500 mm and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and film carriage, as well as an electromagnetic brake that can be very finely adjusted via potentiometer, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. If the winder needs to be used at a different location in between, it can be easily lifted and moved with a forklift using the integrated cut-outs. In addition to a photocell for detecting dark packages or black film, the wrapping height of the KVK 1A can be varied as an option (up to 3200 mm). Lajdpfx Amsy Drfye Nja Recommendation The KVK 1A is ideal if no ramp can be used for space reasons or if particularly heavy or unstable packaged goods are not to be pushed onto the turntable via a ramp. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS06, Exhibition facility Stretch winder ATLANTA NEOS ARYA system for automatic foil blowing and cutting. 99 programs can be saved individually With 1 remote control - optionally more possible Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil power stretch 120-400% Motorized pre-stretching system with stepless adjustment Adjustable pre-stretching ratio from 120 to 400% via control panel Foil application tension electronically controlled via control unit Fast loading system IEF for easy changing of foil rolls Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm Automatic foil cutting unit Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series At least 160 pallets per load - loading time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display - Screen lock program change - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other - Lifting carriage speed from 1.3 up to 5.4 m/min - Lifting carriage speed down from 1.3 to 5.4 m/min - Number of wraps on the pallet foot (1 - 10 wraps) - Number of wraps on the pallet head (1 - 10 wraps) - Adjustment of pallet wrapping height - Foil application tension foot & head winding / ascent & descent independently adjustable - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable - Ergonomic height for foil change Laedpfxjyktv Ss Am Nja ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable winding programs for SFERA EASY - Cross winding (up/down) - Simple winding (only up or only down) - Wrap cycle with preset start and stop height - Winding to a stored height (switching off the light button for the height) - Wrapping cycle for large pallets - Winding cycle for cover sheet film - Soft start cycle for application of edge protection - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Other systems available immediately from the Ludwigsburg warehouse

Year of construction: 2021, operating hours: 10 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S21MythoEasyLow04, Exhibition machine - like new. MYTHO EASY Low Very low height machine Winding height 2400 mm Turntable 1650 mm LP Flat turntable 30mm flat - 500mm long Max. Load weight: 1200 KG PowerStretch 200%, changeable by gear wheels 150-200-250% Automatic adjustable double cord formation - see pictures. Automatic. Cutting Optionbal: Film clamp on turntable German. Schuko plug 6 programs individually storable Lsdpox Ta Nxjfx Am Neaa Further demonstration units available immediately from stock. Prices ex stock Ludwigsburg

Year of construction: 2025, operating hours: 1 h, condition: as good as new (ex-display), Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm Lodpfoyktrtex Am Nsaa 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm Ledpfx Amsykub Ao Noaa FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: like new (used), first registration: 12/2023, Year of construction: 2023, operating hours: 160 h, Hydraulic oil cooler High-performance hose protection Lajdpex Tn Upofx Am Nea LED light on boom Quick coupler MS01 Standard equipment of the machine, width: 710 mm / 1,100 mm extended 180 mm rubber tracks Double-acting auxiliary hydraulics Two travel speeds CE certification This offer is non-binding; no guarantee for equipment details. Subject to errors, changes, and prior sale!

Condition: like new (used), functionality: unexamined, roll diameter: 50 mm, roll width: 930 mm, roll pitch: 70 mm, total width: 1,000 mm, total height: 900 mm, total length: 15,000 mm, conveying length: 15,000 mm, construction height: 900 mm, machine base height: 200 mm, roll spacing: 90 mm, axle spacing: 90 mm, overall weight: 3,500 kg, working width: 1,000 mm, segment length: 3,000 mm, load capacity: 100 kg, Lippert roller conveyor with drive Unused 1x 6 m 1x 9 m Lenze gear motor Ljdpjxu Nggefx Am Neaa 7 supports With control for forward and reverse, including emergency stop 16A plug

Condition: excellent (used), Viessmann Vitoplex/105kw low-temperature boiler with oil burner Laodpfx Amowauaxs Noa

Condition: new, Year of construction: 2026, Recirculating Chamber Furnace, electric, new unit, delivery time 12 weeks - Maximum temperature: 250°C - Internal dimensions (W x D x H): 2100 x 2100 x 2000 mm - Volume: 8,820 liters - Control: Eurotherm Nanodac Controller/recorder with color touchscreen display - 2 pcs. recirculation fans - Double doors with safety door sensors - Overtemperature protection: Eurotherm 3216i - 2 pcs. fresh air fans - Automatic dampers - Electrical design: 400 V / 50 Hz / 3NPE Ledpfxov Hg Eue Am Neaa - Increased heating capacity approx. 70 kW - Temperature accuracy: +/- 6 K in an empty oven - Documentation, CE certificate of conformity - Electrical circuit diagram with spare parts list Note: The oven floor is not insulated but fitted with stainless steel sheet. This allows unrestricted entry for all track widths. Alternatively, an insulated floor can be offered (with customer-defined entry rails). We offer new and used industrial furnaces, which we can also retrofit and upgrade according to customer requirements. Furnace, ovens, drying oven, industrial oven, drying cabinet, heat oven, heat cabinet, recirculating oven, chamber furnace, heating oven, chamber recirculation oven, tempering oven, annealing oven, temper oven, annealing oven.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, Completely overhauled, stock item, 12-month warranty, no solvent furnace! - Max. temperature 250 °C - Total steam chamber 20.5 m³ - Usable dimensions (LxWxH) 2300 x 2750 x 2200 mm - Jumo Imago 500 controller - Heating capacity 36 kW - Max. loading capacity of the furnace car: 6000 kg, electrically driven Ljdsttbf Uopfx Am Neaa - Electric supply and exhaust air dampers by Belimo - Exhaust fan controlled via frequency inverter - Installation dimensions (LxWxH): 3000 x 3000 x 3125 mm plus track in front of the furnace - Own weight approx. 3500 kg - Free-standing control cabinet - Documentation - Electrically tested and supplied with current DGUV test protocol Inspection in our warehouse by arrangement. Car bottom furnace, oven, industrial furnace, convection furnace, chamber convection oven, tempering furnace, heat treatment furnace, drying oven, tempering oven, chamber furnace, drying cabinet,

Condition: used, We are offering used lockers for sale. TECHNICAL DATA Width: 1,200 mm Height: 1,800 mm Depth: 500 mm Colour: Light grey Condition: Used PRICE €70.00 net €83.30 gross incl. VAT Lsdpfx Amey Eqc De Neaa TIERED PRICING (unit prices) 1 - 5 units: €70.00 net 6 - 10 units: €66.50 net 11 - 25 units: €63.00 net from 26 units: €59.50 net Available quantity: 105 units YOUR CONTACTS AT DLK: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. Collection is possible for this item. Delivery or shipping can be arranged at additional cost. The extra charges depend on the delivery location and volume of the shipment and can be provided upon request. PROJECT PLANNING Our sales team is happy to provide you with a non-binding, customised quote tailored to your requirements. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. The price is per unit/net price as specified in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades in new and used products in the areas of warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machinery for trade, industry and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please do not hesitate to contact us. Four wins – The success factors of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions

Condition: new, For sale: ALU plates with certification from surplus stock and residual inventory. * - Description: ALU / AlMg4.5Mn (5083) with certificate -----2x----- - Aluminium rectangular plate / AlMg4.5Mn (5083) with certificate - Length: 2205 mm - Width: 2504 mm - Height: 60 mm - Weight per plate: 911 kg - Purchase price per plate: €5,374.90 | €5.90/kg - * - Sale price per plate: €2,687 / negotiable - * -----2x----- - Aluminium rectangular plate / AlMg4.5Mn (5083) with certificate Laodpfx Amew Skr Tj Nsa - Length: 2205 mm - Width: 2504 mm - Height: 70 mm - Weight per plate: 1,063 kg - Purchase price per plate: €6,271.70 | €5.90/kg - * - Sale price per plate: €2,687 / negotiable - * * Prices are net, VAT excluded * The material comes from surplus stock and residual inventory and is also sold individually. * IMPORTANT: Please note that, for logistical reasons, we are currently only selling within Europe. This means that all purchases and transactions are limited to customers within this geographical region. * “The seller excludes any warranty for the purchased goods. The goods are sold as is, with no guarantee of suitability for a particular purpose or freedom from defects. The buyer confirms that they have inspected the goods before purchase and are satisfied with their condition. The seller accepts no liability for damages resulting from the use of the goods. Any claims by the buyer against the seller are excluded.” * Status: 14.04.2026 * I am happy to answer any questions or provide further information at any time.

Condition: good (used), 1x Arburg 320C 500-170 with Multilift, safety fence, and discharge conveyor. Sold without Z-belt conveyor, temperature control units, and Koch vacuum loader. The machine is available at short notice by arrangement. Ledpfx Ajyym Sajm Nsaa

Condition: excellent (used), functionality: fully functional, mileage: 15,020 km, power: 134 kW (182.19 HP), first registration: 07/1993, fuel type: diesel, empty load weight: 7,520 kg, axle configuration: 4x4, wheelbase: 3,800 mm, next inspection (TÜV): 07/2026, fuel: diesel, gearing type: mechanical, suspension: steel, Year of construction: 1993, Top condition With TÜV Length for superstructure approx. 3.60 m 4x4 all-wheel drive Leaf spring suspension Austrian vehicle Only 15,020 km original mileage Ljdpoyzrp Hefx Am Neaa Perfect for camper conversion

Condition: new, Year of construction: 2026, Recirculating Chamber Furnace, electric, new unit, delivery time 12 weeks - Temperature: 300°C - Internal dimensions (W x D x H): 1500 x 3000 x 2000 mm - External dimensions (W x D x H): 2410 x 3560 x 2730 mm - Capacity: 9,000 liters - Control: Eurotherm Nanodac, 100 programs with 25 segments each; additional 100 programs can be stored/loaded via FTP or a USB flash drive - 2 recirculating air fans - Double doors with safety door sensors - Over-temperature protection: Eurotherm 3216i - Control/recorder unit with color touch display - Robust steel construction, exterior in anthracite - Motorized dampers - Electrical specification: 400 V / 50 Hz / 3NPE - Increased heating power: approx. 70 kW - Entry rails, recess for cart loading - Documentation, CE declaration of conformity - Electrical schematic with spare parts list We are happy to offer transport, installation, and staff training upon request. Laodpfolkb Ezex Am Nja Also available as a new unit with exhaust fan and other equipment! Delivery time approx. 10–12 weeks. Please contact us! We offer new and used industrial furnaces, which we can also modify and upgrade according to customer requirements. Inspection in our machine hall possible at any time by appointment. Furnace, ovens, drying oven, industrial furnace, drying cabinet, heat oven, heating cabinet, recirculating air oven, chamber furnace, heating up oven, chamber recirculation air oven, annealing oven, tempering oven.

Condition: like new (used), Year of construction: 2025, Cantilever racking with roof supports: Hot-dip galvanized bolt-together system Scope of delivery: 9 rack uprights, height 4,230 mm, with base plate, usable depth 1,200 mm 27 cantilever arms, usable depth 1,200 mm, with deflectors 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Without wood purlins and trapezoidal sheets for roof assembly) Including longitudinal and diagonal braces for 1,500 mm upright spacing Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE sections - All components with hot-dip galvanized finish - Load capacity per upright 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, depth 1,200 mm with deflector = 4 storage levels vertically - Including longitudinal and diagonal bracing with 1,500 mm upright spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates in accordance with DIN standard Lasdpfx Ash R Taqsm Nea - Professional telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport with prior notification before delivery. The goods are packaged for easy unloading. The installation surface must be concrete, level, suitable for anchoring, and capable of supporting the applied loads. The floor condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms, 1,200 mm usable depth, with guards - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excluding timber purlins and trapezoidal metal sheets for the roof structure) - Includes longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. mounting hardware (excluding floor anchors) Laedpfjmhhy Nex Am Nja - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available to order at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright: 2,700 kg plus additional roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - Per upright: 3 bolted cantilever arms, depth 1,200 mm, with guards = 4 storage levels - Including longitudinal and diagonal braces with 1,500 mm upright spacing - Rack length: 12,100 mm - Including mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Specialist telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice before delivery. The material is thoughtfully packaged to facilitate easy unloading. The substructure must be concrete, level, and suitable for dowel anchoring, and capable of bearing the applied loads. The floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is neither required nor recommended. According to Occupational Safety regulations, it is recommended that the uprights have at least 500 mm overhang above the top storage level.