Used Bekum Blow Moulding Machine for sale (65,656)

Condition: like new (used), functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Gbjdeg Ailcepfx Aixer Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, WE OFFER AN NICE WORKING CONDITION UNILOY MORETTI RETROFITED WITH NEW SIEMENS CONTROLS Gbodpfxevmd Nwe Aixer MACHINE IS WORKING DAILY PRODUCTION FOR TECHNICAL AUTOMOTIVE PARTS MACHINE WAS OVERHAULED IN COMPLETE WITH NEW OPERATIONAL SYSTEM IN 2022 MAIN TECHNICAL DATA - Installed power 130 kW - Heater power 32 kW - Auger diameter 70mm - Power of auger motor 45kW - Closing force 150kN - Plate 450x550 - Closing plate opening from 320 to 620mm - Head volume 3l

Condition: used, Stretch blow molding machine by Etek ISBM line = Injection stretch blow molding Stretch blow molding machine for single-use PET bottles made from PET preforms Stretch blow molding machine for production using the rotary process Manufacturer: ETEK / GF-Industries, Type Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Power: 90 kW Gsdpfx Aiskucxljxsbr Mains connection: 400 volts, 50 Hz Weight: approximately 6000 kg In like-new condition

Condition: good (used), Year of construction: 2017, functionality: fully functional, LINEAR PET BLOWING MACHINE SET with auxiliary equipment AC ARCOR - multiBlow2 - 2017 Speed: 1,5L - 6000 Cavities: 4 Formats: 0,1 - 3,0L AUXILARY EQUIP 1. Chiller - M.T.A S.p.A - TAE EVO 051 Godpjquuvrofx Aixebr 2. LOW Pressure compressor - SHAMAL 45kw 3. Receiver tank - Low pressure - MAX 16Bar 4. Receiver tank - High pressure - MAX 45Bar

Condition: ready for operation (used), Year of construction: 1988, A Bekum injection blow molding machine without molds is available. Industry: pharmaceutical, product: plastic bottles, operating bottle volume: 10ml, production capacity: 10ml: approx. 4800pieces/h, materials: PE/PP, machine dimensions X/Y/Z: approx. 6250mm/2200mm/2200mm, weight: approx. 12000kg. The rotary drive of the rotary table appears to be worn out. The injection cylinder of the unit is leaking and further leakages are present. An on-site inspection is possible. Expected to be available from July 2026. Gbedpfxsyz Ap Dj Aixjr

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, ID BYP01 We sell a used Chinese - PP melt-blown fabric extrusion line for melt blown, make: Zhangjiagang Sevenstars Machinery Co., Ltd., MFG 2020. It was used for a short time. excellent condition. All EU import duties have been paid. Output max 400 kg per 24 hours. Gbsdouiq Dhjpfx Aixsr General description: 1. Product size: PP melt blown fabric with width at 600mm (after trimming 17m*3) 2. Main Material: PP compounding material 3. Extruder type: SJ65/33 single screw extruder 4. Output capacity: 350-400kg/24hour 5. Electric power supply: 3phase, 380V; 50Hz 6. Additional equipment: • Vacuum feeder • Raw material dryer • Mesh manual filter • T-mould for melt blown fabric • Static electrical discharge equipment • Belt type forming 850mm • Collecting device • Winder and slitting Model L/D Output Speed of Screw Rotationl Power Center Height SJ-65 10-33 80-150kg/h 20-120r/min 18.5kw 1000mm This line contains the following machines: Automacic vacuum loader ZJ-400 and hopper dryer make RHONG model RDM-25, MFG 2020; Single screw extruder, model SJ65/33, MFG 2020; Heating oven for hot air, model HJGF101-4, MFG 2020; Extrusion T-mold, model: SUS630, made in Japan, MFG 2020; Forming device, MFG 2020; Winder & slitting system, MFG 2020; Oil free air compressor, MFG 2020; The PP melt blown nonwoven production line is a polymer melt extruded from a screw extruder. The polymer is extremely stretched by high-speed hot air or other means to form very fine short fibers, which are aggregated to A web is formed on a roller or a screen curtain, and is finally reinforced by self-adhesion or thermal bonding. Its unique properties are widely used in mask filter materials, thermal insulation filling materials, medical health materials, wiping materials, etc. The finished product can pass the N95 standard as the core material of the mask. Process of melt blown nonwoven production line Polymer preparation --- Melt extrusion --- Metering pump --- Melt blown die head assembly --- Solution thin-flow drawing --- Fibber cooling --- Auxiliary network --- Electrostatic electret --- Reinforced finished product. Melt-blown cloth is produced by melt-blown process. The equipment mainly includes: screw extruder, melt pump, screen changer, melt-blown device, winding device, air system (hot air blower and heater), etc. The function of the screw extruder is to melt the slice material; the role of the melt pump is to accurately measure, control the output and the fineness of the fiber, and continuously and evenly transfer the melt to the spinneret. The function of the screen changer is to filter out impurities in the melt so as not to block the spinneret holes. The function of the winding device is to pack the melt blown cloth into rolls. The function of the air system (hot air blower and heater) is to provide the temperature and pressure of the hot air used in the drawing of the spinning air stream. Price Euro 39.200 Euro + VAT, negotiable, FCA: Oradea / Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 13-13, The BLOMAX 4 Blowmoulding machine is of the model 13-13. The machine has no defects and operates in excellent condition with full functionality. Power : 400V/150A/60000W Year of construction : 2000 Gsdpfx Ast Akgwjixebr

Condition: ready for operation (used), Year of construction: 2005, operating hours: 76,988 h, clamping force: 800 kN, screw diameter: 30 mm, total length: 4,050 mm, total width: 1,930 mm, total height: 2,200 mm, overall weight: 5,200 kg, warehouse no.: 503561 manufacturer: ENGEL type: VICTORY 200-80 Tech controller: CC100 Gbedpfx Aiozt Sdfexor year of construction: 2005 operation hours: 76988 h clamping force: 800 kN size of mould plates h x v: 670 x 600 mm min. mould height: 250 mm max. open daylight: 700 mm opening stroke: 450 mm screw diameter: 30 mm swept volume: 99 ccm injection pressure: 1450 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 1x machine incl. belt conveyor machine incl. Handling machine incl. water flow regulator machine without material hopper Anti vibration mounts Schuko-socket 10A measures of machine l x w x h: 4.05m x 1.93m x 2.2m total weight: 5200KG technical data robot-system handling type: Linearhandling manufacture: Engel controller: ER-HLI 31 VC year of construction: 2005 handling weight: 2 kg screen-text: deutsch total weight: 250 kg

Year of construction: 2014, condition: ready for operation (used), An ENGEL injection molding machine is offered. Clamping force: 1800kN, opening force: 96kN, max. opening stroke: 750mm, min. mold height: 300mm, max. platen distance: 1050mm, clear tie-bar spacing: tie-bar-less, mold mounting platens X/Y: 880mm/830mm, max. mold weight: 1500kg at center of gravity 230mm, ejector stroke: 180mm, ejector force forward/backward: 80kN/33kN, screw diameter: 55mm, metering stroke: 215mm, max. stroke volume: 510cm³, injection rate: 255cm³/s, max. injection pressure: 2050bar, nozzle stroke: 350mm, nozzle contact force: 67kN, injection unit heating capacity: 16.3kW, heating zones incl. nozzle: 5, barrel: M9 bimetallic barrel, integrated hot runner control zones: 24×220V, mold cooling circuits: 6×10l/min, hydraulic oil capacity: approx. 540l, operating hours: 67423h (as of 30.06.2026). The machine will be available from December. Machine dimensions X/Y/Z: approx. 6275mm/1888mm/2100mm, weight without mold: approx. 12200kg. Documentation available. An on-site inspection is possible. Gbjdpfxjzt Slpe Aixor

Year of construction: 2017, condition: ready for operation (used), Clamping force: 1800kN, max. opening stroke: 750mm, min. mold installation height: 300mm, screw diameter: 40mm, L/D: 20, G4 S10, clear tie-bar spacing: tie-barless, max. stroke volume: 220cm³, injection rate: 223cm³/s, max. injection pressure: 1930bar, material barrel: M9 (bimetallic barrel), length: 6455mm, height: 2100mm, weight without mold: 13.7t, operating hours: 59,947h, with documentation. Available from December 2026, an on-site inspection is possible. Gbjdpfjztzqzjx Aixjr

Year of construction: 1991, condition: ready for operation (used), A repair-needing Arburg injection moulding machine is offered. Clamping force: 850kN, distance between tie bars X/Y: 320mm/320mm, mould mounting platens X/Y: 490mm/490mm, min. mould height: 250mm, max. opening stroke: 375mm, max. platen daylight: 625mm, ejector stroke/force: 150mm/38kN, screw diameter: 35mm, max. stroke volume: 144cm³, max. shot weight PS: approx. 120g, max. injection pressure: 1500bar. Machine weight: approx. 2500kg. Heater was removed, hydraulic pump runs unevenly. An on-site inspection is possible. Gedpfoztra Hex Aixebr

Condition: used, Year of construction: 2001, operating hours: 38,850 h, clamping force: 25 kN, displacement volume: 20 cm³, injection pressure: 1,810 bar, overall weight: 1,900 kg, screw conveyor diameter: 18 mm, terms of delivery: EXW (ex Works) Godpfx Aisyt R S Ajxjbr delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2001, operating hours: 60,790 h, clamping force: 60 kN, displacement volume: 224 cm³, injection pressure: 2,224 bar, overall weight: 3,350 kg, screw conveyor diameter: 18 mm, Min. mold height 15mm_Max. platen distance 575 + mm Payment: 100% prior to delivery Manufacturer: Battenfeld Type: BA600-50CDC Condition: überarbeitet Operating hours: 60.790 CLAMPING UNIT: - Clamping force: 60 t Öffnungsweg: 425 mm Mould installation height min.: 350 mm Mould installation height max.: - Tie bar distance (h x v): 320 x 320 mm Plate dimension (h x v): 490 x 490 mm Centering (fix- movingplate): 125 / 125 mm INJECTION UNIT: IU50 Gedpfx Ajh Tk Rvsixsbr Screw diameter: 18 mm Injection weight in polystyrol: 20,4 g Stroke volume: 22,4 cm³ Einspritzdruck: 2.224 bar CONTROL: Unilog 4B Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: ! Air valves: - Hot runner control devices: - Robot interface: Euromap 12 GENERAL DATA: - Installed heating capacity: 3,6 kW Pump drive power: 11,0 kW Total installed power: Motor + Heizung Total weight: 3.350 kg Total size L x B x H: 4,0 x 1,5 x 2,1 m

Condition: used, Year of construction: 2005, operating hours: 81,700 h, clamping force: 45 kN, displacement volume: 69 cm³, injection pressure: 2,400 bar, overall weight: 3,300 kg, screw conveyor diameter: 25 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: % prior to delivery Manufacturer: Engel Type: VICTORY 200/45 Tech + er/usp Condition: aus laufender Produktion Operating hours: ca. 81.700 CLAMPING UNIT: - Clamping force: 45 t Öffnungsweg: 355 mm Mould installation height min.: 175 mm Mould installation height max.: - Tie bar distance (h x v): holmlos Plate dimension (h x v): 550 x 430 mm Centering (fix- movingplate): / mm INJECTION UNIT: IU200 Screw diameter: 25 mm Injection weight in polystyrol: 63 g Stroke volume: 69 cm³ Einspritzdruck: 2.400 bar CONTROL: CC Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 1 Air valves: - Hot runner control devices: - Gjdpfx Aisrbqtnjxebr Robot interface: Angußpicker er/usp Other equipment: Nadelverschl. Hydr., Schnittstelle Dosier- und Temperiergerät GENERAL DATA: - Installed heating capacity: 6,8 kW Pump drive power: 11 kW Total installed power: Motor + Heizung Total weight: 3.300 kg Total size L x B x H: 3,3 x 1,2 x 2,2 m

Condition: used, Year of construction: 2001, operating hours: 70,000 h, clamping force: 50 kN, displacement volume: 739 cm³, injection pressure: 2,470 bar, overall weight: 2,500 kg, screw conveyor diameter: 28 mm, terms of delivery: FCA Pegnitz delivery time: on request Gjdpfezt Alysx Aixjbr terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2013, operating hours: 30,000 h, clamping force: 35 kN, displacement volume: 430 cm³, injection pressure: 2,146 bar, overall weight: 1,310 kg, screw conveyor diameter: 24 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Gsdpfx Aiszt Altsxebr

Condition: excellent (used), Year of construction: 2014, operating hours: 56,851 h, functionality: fully functional, clamping force: 1,100 kN, screw diameter: 25 mm, displacement volume: 86 cm³, injection pressure: 3,000 bar, mold height (min.): 200 mm, opening stroke: 450 mm, overall weight: 4,800 kg, input voltage: 400 V, Equipment: documentation/manual, warehouse no.: 503665 manufacturer: Wittmann Battenfeld type: EcoPower 110-350 controller: UNILOG B6P year of construction: 2014 Gsdpoy Akn Rjfx Aixobr operation hours: 56851 h clamping force: 1100 kN distance between tie-bars h x v: 470 x 420 mm size of mould plates h x v: 680 x 663 mm min. mould height: 200 mm max. mould height: 450 mm max. open daylight: 830 mm opening stroke: 380 mm screw diameter: 25 mm swept volume: 86 ccm injection pressure: 3000 bar equipment included screen text german Screentext Multi-Language CEE-socket 16A machine incl. water flow regulator Anti vibration mounts measures of machine l x w x h: 4.57m x 1.5m x 2.13m total weight: 4800KG

Condition: excellent (used), Year of construction: 2012, operating hours: 49,130 h, functionality: fully functional, clamping force: 900 kN, screw diameter: 42 mm, displacement volume: 214 cm³, injection pressure: 1,724 bar, ejector force: 20,400 N, ejector stroke: 130 mm, plate length: 610 mm, plate width: 635 mm, total length: 4,370 mm, total width: 1,210 mm, total height: 2,200 mm, overall weight: 3,730 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 725 mm, Equipment: documentation/manual, warehouse no.: 503452 manufacturer: BOY type: 90 E controller: Procan ALPHA year of construction: 2012 operation hours: 49130 h clamping force: 900 kN distance between tie-bars h x v: 430 x 360 mm size of mould plates h x v: 635 x 610 mm min. mould height: 250 mm max. open daylight: 725 mm opening stroke: 475 mm screw diameter: 42 mm swept volume: 214.7 ccm injection pressure: 1724 bar screw length: 20 l/d Gbedpfsy Akl Asx Aixsr screw stroke: 155 mm screw speed: 280 min screw torque: 700 N plasticising rate: 136 g/s PS number of heating zones: 4 nozzle stroke: 250 mm equipment included screen text german core pulling hydraulically 1x machine without material hopper machine without water flow regulator Anti vibration mounts interface EUROMAP 67 interface USB measures of machine l x w x h: 4.37m x 1.21m x 2.2m total weight: 3730KG

Condition: ready for operation (used), Year of construction: 2010, operating hours: 54,872 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 55 mm, displacement volume: 570 cm³, injection pressure: 2,387 bar, total length: 6,500 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 15,000 kg, clamping force: 2500 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 995 x 1050 mm Gsdpfxezgt Ile Aixebr min. mould height: 330 mm max. open daylight: 1150 mm opening stroke: 820 mm screw diameter: 55 mm swept volume: 570 ccm injection pressure: 2387 bar measures of machine l x w x h: 6.5m x 2.2m x 2.3m total weight: 15000KG

Condition: used, Year of construction: 2004, operating hours: 76,000 h, total height: 2,480 mm, total width: 2,330 mm, total length: 9,830 mm, screw diameter: 70 mm, clamping force: 4,200 kN, displacement volume: 1,047 cm³, 2. Unit 55 with ø 22 Injection pressure: 1674 bar Volume: 30cm³Distance between injection unit 1 and 2: 300 mm (piggy / Multinject) clamping force: 4200 kN distance between tie-bars h x v: 800 x 800 mm size of mould plates h x v: 1270 x 1200 mm min. mould height: 380 mm max. open daylight: 1400 mm opening stroke: 1020 mm screw diameter: 70 mm swept volume: 1047 ccm injection pressure: 1778 bar equipment included screen text german core pulling hydraulically 6x Machine without Handling machine without material hopper Anti vibration mounts mould heating 16x Gbedpfxozgt Npo Aixjr Injection moulding machine for two components measures of machine l x w x h: 9.83m x 2.33m x 2.48m total weight: 23090KG

Condition: good (used), Year of construction: 2011, operating hours: 78,454 h, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 60 mm, clearance between the columns: 630 mm, displacement volume: 678 cm³, injection pressure: 2,007 bar, installation height: 330 mm, total length: 6,500 mm, total width: 2,200 mm, total height: 2,300 mm, clamping force: 3000 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 995 x 1050 mm min. mould height: 330 mm max. open daylight: 1150 mm opening stroke: 820 mm screw diameter: 60 mm swept volume: 678 ccm injection pressure: 2007 bar equipment included machine without robot-system screen text german CEE-socket 16A pressure accumulator for uprated injection speed core pulling hydraulically 2x Gjdpfxezgt Skj Aixsbr machine without material hopper Anti vibration mounts interface robot EUROMAP 67 interface for handling Schuko-socket 10A measures of machine l x w x h: 6.5m x 2.2m x 2.3m total weight: 15000KG

Condition: excellent (used), Year of construction: 2019, operating hours: 8,250 h, clamping force: 2,000 kN, screw diameter: 50 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, total length: 4,110 mm, total width: 2,650 mm, total height: 4,810 mm, overall weight: 22,000 kg, clamping force: 2000 kN size of mould plates h x v: 1772 x 800 mm min. mould height: 400 mm max. open daylight: 900 mm opening stroke: 500 mm round table diameter: 2000 mm screw diameter: 50 mm swept volume: 392 ccm injection pressure: 2000 bar equipment included rotary table screen text german screen text english Gjdpsyv D T Tefx Aixebr CEE-socket 16A core pulling hydraulically 4x air valve 1x machine incl. water flow regulator machine without material hopper Anti vibration mounts interface robot EUROMAP 67 interface EUROMAP 73 interface OPC measures of machine l x w x h: 4.11m x 2.65m x 4.81m total weight: 22000KG

Condition: excellent (used), Year of construction: 2013, operating hours: 22,420 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 20 mm, displacement volume: 31 cm³, ejector force: 25,000 N, ejector stroke: 175 mm, total length: 4,200 mm, total width: 2,100 mm, overall weight: 4,300 kg, type of input current: three-phase, input voltage: 400 V, turntable diameter: 1,200 mm, Equipment: documentation/manual, During the inspection, it was determined that the cylinder no longer met our quality standards. This means that you have the choice between a 25, 30, or 35 mm unit. This will be purchased individually for you and is included into our offered machine price. warehouse no.: 503459 manufacturer: ARBURG type: Allrounder 1200 T 1000-170 controller: Selogica year of construction: 2013 operation hours: 22420 h technical data clamping unit clamping force: 1000 kN min. mould height: 400 mm max. open daylight: 700 mm opening stroke: 300 mm round table diameter: 1200 mm Gedpfx Aisy Akpujxebr equipment included 3x control for hotrunner screen text german CEE-socket 16A complact flash drive rotary table freely programmable inputs (2) and outputs (2) machine with material hopper machine incl. water flow regulator Hydraulically actuated needle shut-off-nozzle interface EUROMAP 67 Servomotor pump drive Energy-saving drive wear-resistant injection unit measures of machine l x w x h: 4.2m x 2.1m x 0m total weight: 4300KG

Condition: used, Year of construction: 2008, operating hours: 10,113 h, clamping force: 1,200 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, displacement volume: 156 cm³, injection pressure: 2,429 bar, total length: 6,000 mm, total width: 1,700 mm, total height: 2,190 mm, clamping force: 1200 kN distance between tie-bars h x v: 470 x 470 mm Gbodpfszgt E Rjx Aixer size of mould plates h x v: 780 x 735 mm min. mould height: 200 mm max. mould height: 450 mm max. open daylight: 850 mm opening stroke: 400 mm screw diameter: 35 mm swept volume: 156 ccm injection pressure: 2429 bar equipment included screen text german screen text english CEE-socket 16A core pulling hydraulically 2x machine incl. water flow regulator machine without material hopper Anti vibration mounts electric interface for handling units according to Euromap 12 Schuko-socket 10A measures of machine l x w x h: 6m x 1.7m x 2.19m total weight: 9700KG

Condition: like new (used), Year of construction: 2019, operating hours: 950 h, functionality: fully functional, clamping force: 1,800 kN, screw diameter: 55 mm, clearance between the columns: 710 mm, displacement volume: 653 cm³, injection pressure: 2,041 bar, mold height (min.): 300 mm, opening stroke: 650 mm, total length: 5,500 mm, total width: 1,800 mm, total height: 2,300 mm, overall weight: 10,500 kg, Injection molding machine for processing PVC-H. Conversion for processing PS/PP/PA etc. can be offered upon request! warehouse no.: 503679 manufacturer: Wittmann Battenfeld type: Smart Power XL 180-1330 controller: UNILOG B8 year of construction: 2019 operation hours: 950 h clamping force: 1800 kN distance between tie-bars h x v: 710 x 660 mm size of mould plates h x v: 950 x 955 mm min. mould height: 300 mm max. open daylight: 950 mm opening stroke: 650 mm screw diameter: 55 mm swept volume: 653 ccm injection pressure: 2041 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 2x air valve 1x machine with material hopper PVC-U injetion unit Godpfx Aijzgt Ifexsbr Schuko-socket 10A measures of machine l x w x h: 5.5m x 1.8m x 2.3m total weight: 10500KG