Used Bevel Gear 23 Teeth - 1 Piece for sale (101,568)

Condition: like new (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 25582, Equipped with: Fanuc 30ia Control Hydraulic System Coolant System Chip Conveyor Pneumatics Lube System Jib Crane Change Gears Mist Collector Transformer Work Light Stack Light Specifications: Extreme Ratio: 10:1 Root Angle Range (B-Axis): -5 deg. TO 90 deg. Equivalent Root Angle Range: -8 deg. to 90 deg. (Equivalent refers to cradle type machine.) Face Hobbing: Examples of Maximum Gear Pitch Diameter -35 Degree Spiral -152 mm TRI-AC Cutter w/13 Blade Groups Max. Full Depth: 0.550" Max. Face Width: 1.6" Face Milling: Examples of Maximum Gear Pitch Diameter -35 Degree Spiral -7.5" Diameter Cutter Max. Full Depth: 0.625" Max. Face Width: 1.6" Max. Swinging Base Travel (B-Axis): -5 deg. to 90 deg. Max. Vertical Travel (Y-Axis): -4" to 7" Max. Horizontal Travel (X-Axis): -6" to 4" Sliding Base Travel (Z-Axis): 2" to 12" Machine Center to Work Spindle Face (Fixed): 4.5" Tooth Number: 5 to 200 Inclusive Cutting Diameters: Conventional Face Milling: 1.1" to 7.5" Helixact: 100mm to 200mm Fine Pitch: 102mm to 152mm Coarse Pitch: 152mm only Speeds: B-Axis--Swinging Base (Degrees per Second): 30deg./sec. Ledpjzn Aymefx Ahajah A-Axis--Work Spindle (Face Milling)(RPM): 0-75 A-Axis--Work Spindle (Face Hobbing)(RPM): 0-375 C-Axis--Cutter Spindle (RPM): 30-500 X-Axis--Horizontal (Inches per Second): 4.92"/sec. Y-Axis--Vertical (Inches per Second): 4.92" Z-Axis--Sliding Base (Inches per Second): 4.92"/sec. Work Spindle: Diameter of Taper at Large End (#39 Taper): 3-29/32" Taper per Foot: 39/64" Depth of Taper: 3" Floor Space: 95.75" x 63.5" Height (less mist collector): 90.75" Approx. Weight: 22,000 lbs

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Lajdpfx Ahertrykjaeh Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Laedpfx Asrtrzdehash Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Ledpfexdfa Ujx Ahasah Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs

Condition: new, 06580421;1104301010100 Packaging unit: piece Lodpj Abflvefx Ahaoah Packaging quantity: 1

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Laedpferuakgox Ahaeh Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: new, 06580422; 06565388; 1104301010200; 0656 53 Packaging quantity: 1 Packaging unit: piece Lsdpe Abfl Nofx Ahaeah

Condition: new, 6563287; 1104501; 0656 3287; 06563287 Laodpo Abfmaofx Ahash Packaging unit: piece Packaging quantity: 1

Condition: new, 6580616; 1104501; 0658 0616; 06580616 Lasds Abfmgepfx Ahash Packaging quantity: 1 Packaging unit: piece

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, wheel diameter: 700 mm, gear diameter: 1,000 mm, wheel width: 152 mm, workpiece spindle speed (max.): 67 rpm, feed length X-axis: 610 mm, feed length Y-axis: 610 mm, feed length Z-axis: 725 mm, pivoting range: 95 °, spindle bore: 203 mm, travel distance X-axis: 610 mm, travel distance Z-axis: 725 mm, Equipment: rotational speed infinitely variable, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Laodpsxaqa Sefx Ahaeh Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: used, Year of construction: 1977, machine/vehicle number: 19909, Equipped with: Index Plate Lasdpjxdfazjfx Ahaeh Geneva Cam Cutter Body Hydraulic Work Clamping Coolant Pump & Tank Chip Conveyor Additional Cutter Bodies, Index Plates & Geneva Cams Available Specifications: Minimum Outside Cone Distance: 2.75" Maximum Cone Distance: 10" Maximum Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 Deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 15.6 to 87.7 RPM Feeds (seconds/tooth): 5 to 34.3 Main Motor: 10hp, 1800 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approximate Floor Space: 118" x 86.5" Needed Overall Height: 70" Approximate Net Weight: 18,820 lbs Shipping Weight Boxed for Export: 20,500 lbs

Condition: excellent (used), For sale: Mannesmann Demag AF06-L-M-0-145-1 geared motor with a three-phase Demag ZBA90 A4 B020 motor. The unit is fully functional, tested, and ready for operation. The visual condition is good, with normal signs of use. Notes: * One mounting lug has been cut – this does not affect the operation or correct mounting of the geared motor. * There is a small crack on the plastic motor cover, which does not affect the operation of the unit. Technical data: Laedpfx Aez Snpzjhaoh Manufacturer: Mannesmann Demag AG Gearbox model: AF06-L-M-0-145-1 Motor model: Demag ZBA90 A4 B020 Power: 1.1 kW Supply: 3×400 V AC, 50 Hz Brake voltage: 180 V DC Rated current: 2.80 A Motor speed: 1400 rpm Output speed: approx. 23 rpm Gear ratio: i = 60.1 Brake torque: 20 Nm Cos φ: 0.75 Ingress protection: IP54 Insulation class: F Weight: 21.2 kg

Condition: new, Carbide-tipped circular saw blades Type TF-negative Trapezoidal flat tooth, negative Application: for thin-walled profiles made of aluminum and plastic Ledpfxj Abnw Uj Ahasah Made in Germany

Condition: new, functionality: fully functional, machine/vehicle number: 01.3206969317.0003.00, power: 2.2 kW (2.99 HP), rotational speed (max.): 1,400 rpm, input frequency: 50 Hz, type of input current: AC, overall weight: 89 kg, torque: 1,700 Nm, protection type (IP code): IP54, Voltage: 230/400 V (three-phase current) Brake voltage: 400 V AC Lodpfx Ahsu Datqeasah Insulation class: B This bevel geared motor is a powerful drive solution that is ideal for demanding industrial applications. With its robust design and high efficiency, this motor offers reliable performance at variable speeds. The integrated bevel gearbox ensures a compact design and enables optimum power transmission. It is particularly suitable for conveyor technology, mechanical engineering and other industrial applications where precision and durability are required.

Condition: new, Description Equipped with a powerful motor that can be adjusted to three speeds, the PCW3000-Li can be used both indoors and outdoors, down to -14°C (6.8°F). It features a brushless electric motor that can be tilted 360°. It is a direct drive, meaning there is no clutch. Ledpfj Adh H Uox Ahaeah Depending on the selected speed and the weight of the load being pulled, the battery provides 20 to 40 minutes of continuous pulling without any loss of power. It is always ready for use and requires no maintenance when not in operation. Included in the set: 1x PCW3000-Li: Battery-powered pulling winch, max. pulling force 1000 kg 1x PCA-1205M: Polyester rope, 10 mm x 50 m, 2200 kg MBS 1x PCA-1360: "ROPEWIZER" heavy-duty thimble for ropes with Ø 10-12 mm 1x PCA-1255: Rope bag - Small - Ø26 cm x H36 cm - for 50 m / 12 mm rope 1x PCA-1275: Stainless steel pulley, 60 kN MBL, for 6-10 mm ropes 2x PCA-1276: Oval steel carabiner, MBS 25 kN 1x PCA-1281: Rope end hook with safety latch, MBS 750 kg 1x PCA-1260: Polyester sling, 60 mm x 2 m, MBS 2180 kg 1x PCA-0231: 82V quick charger with active cooling 1x PCA-0206: 82V lithium-ion battery with Bluetooth - 2.5 Ah capacity 1x PCA-1350: Polyester round sling, 2.50 m

Condition: used, machine/vehicle number: XLWRT2839C2301615, operating hours: 20,000 h, gearing type: automatic, color: other, Year of manufacture: Apr 2012 Year of construction: 2012 Lasdjwd Na Ujpfx Ahaeh Axle 1: left 8mm right 8mm Axle 2: left 6 6 mm right 6 6 mm Axle 3: left mm right mm

Condition: new, Flagpole H8mxD90mm, hard aluminum, anodized, with rotating boom and internal raising mechanism. · 1-piece, with rotating boom Lajdpfx Aho Adcztsajh · with telescopic boom, diameter 40 mm, adjustable from 100-1500 mm, for flags with a hem · with plastic loops for attaching to the flagpole · Raising mechanism: internal Diameter: 90 mm Material: hard aluminum, anodized Height above ground: 8 m Features: with rotating boom

Condition: new, Canopy, add-on unit, type EH, dimensions 4300x2250x2330 mm, pitched roof, corrugated sheet metal, gray-white · For sheltering bicycle racks, waste containers, or as a storage area for pallets, wire mesh containers, or other storage items Ledpo Adcnaefx Ahaoah · Galvanized steel construction with a round tube frame Design: Add-on unit, single-sided Type: Pitched roof Frame color: Gray-white, RAL 9002 Width: 4300 mm Height: 2250 mm Roof: Corrugated sheet metal Roof color: Gray-white, RAL 9002 Frame: Galvanized steel construction Depth: 2330 mm

Condition: new, Flagpole H9mxD90mm, hard aluminum, anodized, with internal hoisting mechanism. · 1-piece · Cylindrical profile · Internal hoisting mechanism, lockable access opening · With plastic loops for attachment to the flagpole · Vandal-resistant cable system Material: Hard aluminum, anodized Laedps Adc R Isfx Ahajh Height above ground: 9 m Hoisting mechanism: Internal Diameter: 90 mm

Condition: new, Cold cleaner RFX 200l, price including disposal of the container RAPID · Suitable for the small parts cleaner, Art. No. 9172 473502 · This cold cleaner is a low-odor solvent mixture without the addition of emulsifiers or surfactants · Slow-evaporating · With corrosion protection · With excellent cleaning power and a considerable service life, for oil and grease contamination on engines, machine parts, and housings · It is a hydrocarbon solvent · Contains no halogenated hydrocarbons and is made exclusively from low-odor, aromatic-free solvents for liquids with a flash point > 55 °C, formerly hazard class A III (VbF) · The cold cleaner meets the requirements of occupational safety Laodpfx Ahs Adapbjaoh · The cleaning agent is available in 50-liter and 200-liter drums. Used cleaning fluid is exchanged for fresh fluid (disposal must be explicitly stipulated). This means: Guaranteed disposal without additional costs. Technical data: · Evaporation rate (ether 1): 150 · Flash point: 63° C · Density (15° C): 0.797 g/ml · Other technical properties: Design: Price including disposal Content: 200 l Packaging: Drum

Condition: new, for Vogesenblitz horizontal wood splitter, 28 tons. Lodpfx Ao Adgm Tohaoah

Condition: new, Description The VPE16 Vogesenblitz log splitter offers an impressive splitting force of 16 tons and is powered by a combined drive system via PTO shaft and an electric motor with 400 V/4.8 kW, equipped with a double pump. It is characterized by its compact design with a lowerable cylinder for a transport height of 1.90 m and is equipped with a three-point linkage for categories I and II. Safety is ensured by an easily operated 2-hand safety circuit, while two splitting speeds and a rapid piston return increase efficiency. The ergonomically shaped splitting wedge and the replaceable splitting knife with a length of 245 mm ensure user-friendliness and durability. Other features include brass guides, a full-steel base frame, a powder coating, and a holder for an axe and hatchet. The log splitter complies with the safety standards according to EN609-1 and has a mechanical log lifter. - 16 tons splitting force - Combined drive via PTO shaft and electric motor 400 V / 4.8 kW with double pump - Compact splitter with lowerable cylinder (quick release) for transport height 1.90 m - Three-point linkage cat. I and II - Easily operated 2-hand safety circuit - 2 splitting speeds - Rapid piston return - Ergonomically shaped splitting wedge - Splitting knife length 245 mm - Replaceable splitting knife - According to EN609-1 incl. mechanical log lifter - Holder for axe & hatchet - Brass guides - Full-steel base plate - Powder coated Drive: PTO shaft drive & electric motor 400 V Pump: Single / Double Opening width (cm): 108 Dimensions (H x L x W cm) (*working position - transport position): 250-190* x 120 x 110 Pump capacity (L/min): 54 / 42 Lajds Adlafopfx Ahaeh Speed 1 (cm/s): 10.6 / 9.5 Speed 2 (cm/s): 27.8 / 20.9 Splitting force (tons): 16 Piston return (cm/s): 16 / 14.2 Container capacity (L): 28

Condition: new, Description The VP12 Vogesenblitz log splitter offers a splitting force of 12 tons and is powered via a power take-off (PTO) with a 37-liter pump. It is a compact splitter with a lowering cylinder for a transport height of 1.90 m and features a three-point linkage of categories I and II. The easy-to-use two-hand safety control, two splitting speeds, and the rapid piston return ensure efficient operation. With an ergonomically shaped splitting wedge, a splitting blade length of 245 mm, and an interchangeable splitting blade, it can be used in a variety of applications. It complies with the safety standard EN 609-1 and is supplied including a mechanical log lifter. Additional holders for a splitting maul and axe, as well as brass guides and a robust powder coating, complete the equipment. - 12 tons splitting force - Drive via PTO, 37-liter pump - Compact splitter with lowering cylinder (quick release) for a transport height of 1.90 m - Three-point linkage Cat. I and II - Easy-to-use 2-hand safety control - 2 splitting speeds - Rapid piston return - Ergonomically shaped splitting wedge - Splitting blade length 245 mm - Interchangeable splitting blade - Complies with EN609-1 incl. mechanical log lifter - Holder for splitting maul & axe - Brass guides - All-steel base plate - Powder coated Hydraulic winch, mechanically controlled: - Pulling force up to approx. 600 kg - Cable speed up to 0.5 m/s - Limit switch at the cable inlet - 20 m cable with cable hook and safety device - Cable Ø 6 mm (Overall height in transport position with winch ~213 cm) Opening width (cm): 108 Speed 2 (cm/s): 25.6 Pump capacity (L/min): 37 Lodpfxe Adldws Ahasah Splitting force (tons): 12 Pump: Single Piston return (cm/s): 18.9 Drive: PTO drive Speed 1 (cm/s): 11.4 Dimensions (H x L x W cm) (*Working position - Transport position): 250-190 x 120 x 110 Tank capacity (L): 28

Condition: new, Description The VPE12 wood splitter offers an impressive splitting force of 12 tons and is equipped with a combined drive system via a power take-off, a 37-liter pump, and a powerful electric motor (4.8 kW/400 V). This compact splitter features a lowerable cylinder for a transport height of only 1.90 m, a three-point linkage (Cat. I and II), and an easy-to-use two-hand safety switch. With two splitting speeds and a fast piston return, it offers high efficiency. The ergonomically shaped splitting wedge and the replaceable splitting blade (245 mm) ensure optimal performance. Furthermore, it is equipped with a hydraulic log lifter according to EN609-1 and provides holders for an ax and hatchet. The brass guides and the sturdy, all-steel base plate are powder-coated, ensuring durability and robustness. - 12 tons of splitting force - Combined drive via power take-off, 37-liter pump, and 400 V / 4.8 kW electric motor - Compact splitter with lowerable cylinder (quick-release) for a transport height of 1.90 m - Three-point linkage Cat. I and II - Easy-to-use two-hand safety switch - 2 splitting speeds - Fast piston return - Ergonomically shaped splitting wedge - Splitting blade length 245 mm - Replaceable splitting blade - Complies with EN609-1, including hydraulic log lifter - Holder for ax & hatchet - Brass guides - All-steel base plate - Powder-coated Cylinder return speed (cm/s): 18.9 / 12.5 Drive: Power take-off and 400 V electric motor Pump: Single Opening width (cm): 108 Lasdo Adk Twepfx Ahaoh Speed 1 (cm/s): 11.4 / 7.7 Splitting force (tons): 12 Pump output (L/min): 37 / 21 Speed 2 (cm/s): 25.6 / 16.7 Dimensions (H x L x W cm) (*Working position - Transport position): 250-190 x 120 x 110 Tank capacity (L): 28

Condition: new, Description Laede Adgphepfx Ahaeh The FB509 TF T Vogesenblitz 9-ton wood splitter is the most powerful AMR short log splitter and impresses with its high-performance features and well-thought-out safety features. With a 2-hand safety circuit for safe and efficient operation, robust construction, and a solid work table, it ensures stability and durability. The practical wood storage areas facilitate the handling and stacking of wood. The wood splitter is equipped with a chassis that facilitates transport and offers additional safety through a protective switch for the electric motor, as well as an integrated oil filter. The continuously adjustable stroke of up to 50 cm allows adaptation to different wood sizes. The FB509 TF T offers you a reliable device for effective wood splitting work. - 2-hand safety circuit with synchronized movement - Splitting wedge with quick return - Length of splitting wedge 325 mm - Cylinder stroke 50 cm, continuously adjustable for a wide range of wood sizes - Oil filter protects the system from contamination - Splitting length continuously adjustable for flexible adaptation - Fixed splitting table for splitting lengths up to 55 cm - Height of the splitting table approx. 88.5 cm - Incl. chassis and two storage baskets Opening width (cm): 55 Pump (cm/s): Single Splitting force (t): 9 Drive: Electric motor 4 kW / 400 V Dimensions (H x L x W) (cm): 130x60x84 Ram advance (cm/s): 6.8 Hydraulic oil capacity (L): 10 Pump capacity (L/min): 16.5 Ram return (cm/s): 15.15