Used Cast Solute V 1500 for sale (43,050)

Year of construction: 2014, condition: new, functionality: fully functional, New chamber for manufacturing silicone molds + curing oven. Nsdez Ep U Nepfx Agrewl

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance, pallet surface to spindle center line: -20 to 430 mm Distance, B-axis center to spindle center line: -40 to 410 mm Distance, B-axis center to spindle center line: -20 mm Distance, pallet center to Z zero point: 265 mm Distance, pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance, pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool holder: SK 40 Spindle taper: 7/24, taper No. 40 Inner diameter of spindle bearing: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle alignment: Standard Tool clamping force: 7.0 kN Tool changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free secondary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed rates Rapid traverse, X/Y/Z-axis: 50 m/min Rapid traverse, B-axis: 30 min⁻¹ Rapid traverse, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Dwell feed rate, X/Y/Z-axis: 0 to 4000 mm/min Dwell feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. motion increment, X/Y/Z-axis: 0.001 mm Min. motion increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical connection values Rated apparent power: 36 kVA Nsdpfx Agez D Taaerjwl Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT Chip conveyor Coolant system Tool holders in the tool changer External reference: Hanon - Lot 1

Year of construction: 2003, condition: excellent (used), BCD Stainless Steel Process Tank Capacity 1500 |Ltr 316 Stainless Steel Nedpfxsz E Inze Agrowl Bevelled bottom Drian with leaver closer

Condition: excellent (used), functionality: fully functional, load capacity: 1,500 kg, Equipment: foot remote control, 3-axis PEMA welding positioner APS 1500 - stepless height adjustment - includes hand-held remote control - maximum load 15,000 N (1,500 kg) - rotation speed 0.07 - 1.3 rpm - rotational torque 1,000 Nm - hydraulic tilting up to 135° Nwedpeyupd Hofx Agrol - tilting torque 3,000 N - max welding current 700 A - plate diameter 700 mm - height 780 - 1,550 mm - dimensions 1,640 x 810 mm - power supply 3 x 400 V / CEE 16A - weight 730 kg

Condition: used, Year of construction: 2007, Attachment: Chamber filter press, used Type: Passavant Year of manufacture: 2007 Application: Sludge dewatering Filter plate format: 1500x2000 Number of plates: approx. 58 Filter plates: PP Nwedpfx Agszk E H Iorel Filter cloths: available as an option, tailored to the medium Filter area: approx. 286 m2 Press volume: approx. 4660 dm3 Filter pressure: approx. 15 bar Total weight: 32,900 kg Application: Sludge treatment, dewatering system. Filter presses are pressure filters that operate in a batch process for the solid-liquid separation of suspensions. Purchase or rental: Rental or purchase. Inspection of the equipment can be arranged at our facility.

Condition: new, Bernardo Universal Lathe Smart 410 x 1500 Pro Vario Technical Specifications Centre distance: 1500 mm Centre height: 210 mm Swing over bed: 420 mm Swing over gap: 580 mm Swing over cross slide: 255 mm Bed width: 250 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1 – 6 Speed range, 2 stages: 30 – 550 / 550 – 3000 rpm Longitudinal feed range (17): 0.05 – 1.7 mm/rev Cross feed range (17): 0.025 – 0.85 mm/rev Metric threads (42): 0.2 – 14 mm Nwsdpfx Agjxl Ta Serjl Imperial threads (45): 2 – 72 TPI Quill diameter: 50 mm Quill travel: 140 mm Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 2590 x 1050 x 1600 mm Weight: approx. 1325 kg Features • Equipped as standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, selected speed displayed digitally • Prism bed made of cast iron, inductively hardened and precision ground • Central, user-friendly feed and thread control with leadscrew and feed shaft • Modern main spindle bearings with precision angular contact ball bearings • Standard features include frequency inverter and 3-axis digital readout • Hardened and ground gears and shafts, including in the feed gearbox • Speed and feed settings are simple, smooth, and precise to operate • Adjustable tailstock for taper turning, handwheel with fine scaling (0.02 mm) • Removable bridge allows machining of large-diameter workpieces Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw steel chuck PO3-200 mm / D6 • Faceplate 350 mm • Fixed steady – max. workpiece diameter 135 mm • Travelling steady – max. workpiece diameter 65 mm • Foot pedal with brake function according to CE • Four-way tool post • Safety guard for four-way tool post • Micrometer longitudinal stop • Turret stop with fine adjustment • Frequency inverter • First fill with Shell Tellus 46 • Coolant system • Slip clutch • Thread dial indicator • LED machine lamp • Change gears • Reducing sleeve • 2 dead centres • Chip guard/rear screen • Operator tools

Condition: good (used), Year of construction: 2003, Opportunity to buy a 3 axis vertical machining center in good condition. Mainly used process plastic, so it has not suffered heavy machining and only 7434 spindle hours. Optional: ca 30 BT-40 holders, including drill chuck holders, Weldon holders and collet chucks. This machine is immediately available for delivery. Travel distance X-axis 1500 mm Travel distance Y-axis 300 mm Travel distance Z-axis 350 mm CNC Control HEIDENHAIN TNC 410 Total height 2300 mm Total width 3250 mm Overall weight 3200 kg Spindle speed (max.) 8000 rpm Product length (max.) 2900 mm Number of axes 3 Toolholder BT40 Clamp surface height above machine table 860 mm Max tool diameter 80 mm Max tool length 200 mm Max tool weight 3 kg Internal cooling Air cooling through the spindle Capacity tool magazine 19 positions Nodpfx Agjzzz Eberewl Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, grinding length: 1,500 mm, grinding width: 300 mm, Disc grinding machine with magnetic clamping plate, 1500mm x 300mm. The grinding machine was in operation until we dismantled it. The company was dissolved due to the owner's retirement. Nwsdpjz Dumnjfx Agrsl The senior manager was always very satisfied with this grinding machine and even bought the same model again! Includes coolant system. Loading onto a truck is possible with a crane or forklift and is free of charge.

Condition: used, Used chamber filter press Andritz/Netzsch 1500x2000 with 125 plates Quantity: 2 available Njdpozlb D Sefx Agrowl Press dimensions: Length: 13455 mm x Width: 3125 mm x Height: 4635 mm Empty weight: 51600 kg Filter area: 459 m2 Filter area after expansion: 559 m2 Press volume: 4989 l Press volume after expansion: 6080 l Cake thickness: 25 mm

Condition: new, Bernardo Universal Lathe Titan 560 x 1500 Pro Vario Technical Specifications Distance between centres: 1500 mm Nsdpfx Agsxl Tcyjrswl Centre height: 280 mm Swing over bed: 560 mm Swing over gap: 785 mm Swing over cross slide: 350 mm Bed width: 350 mm Spindle bore: 105 mm Spindle mount: DIN 55029, D1 – 8 Speed range: 25 – 220 / 220 – 1500 rpm Longitudinal feed range (42): 0.055 – 3.061 mm/rev Cross feed range (42): 0.025 – 1.384 mm/rev Metric threads (41): 0.1 – 14 mm Inch threads (60): 2 – 112 TPI Quill diameter: 75 mm Quill travel: 185 mm Quill taper: MK 5 Motor power: 7.5 kW (10.0 HP) Machine dimensions: length 2840 mm; width x height 1150 x 1610 mm Weight approx.: 2420 kg Features • Supplied as standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, actual speed is displayed digitally • Versatile applications in general engineering, production, single-part manufacturing, etc. • Removable gap bridge enables machining of workpieces with large diameters • Standard with rapid traverse in both longitudinal and cross directions to reduce non-productive times • Modern main spindle bearing with precision angular contact ball bearings • The machine bed is cast in one piece, extremely torsion-resistant and vibration-damping, ensuring the necessary prerequisites for precise turning • Tailstock can be offset for taper turning • Central lubrication of the carriage Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-315 mm / D8 • Fixed steady rest – max. workpiece diameter 180 mm • Follow rest – max. workpiece diameter 120 mm • Foot pedal with brake function according to CE • Safety guard for quick-change tool post • LED machine light • Initial filling with Shell Tellus 46 • Face plate 450 mm • 2 live centres • Frequency inverter • Digital speed display • Slip clutch • Rapid traverse longitudinal and cross • Coolant system • Quick-change tool post with 4 holders • Change gears • Reducing sleeve • Chip guard rear wall • Operating tools

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 0520090257, center height: 230 mm, spindle bore: 58 mm, swing diameter over cross slide: 270 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 30 rpm, type of input current: three-phase, swing diameter over bed slide: 460 mm, turning diameter over cross slide: 270 mm, overall weight: 1,810 kg, turning diameter: 460 mm, turning diameter over bed slide: 460 mm, input voltage: 400 V, rotational speed (min.): 30 rpm, rotational speed (max.): 2,000 rpm, total height: 1,370 mm, total length: 2,750 mm, total width: 1,080 mm, bed width: 300 mm, quill diameter: 60 mm, quill stroke: 130 mm, distance between centers: 1,500 mm, workpiece length between centers: 1,500 mm, Torno Mecânico Convencional C6246VX / 1500mm - Ano 2020: Nwsdpszxrkiofx Agrsl Torno mecânico universal com 460mm de giro sobre a bancada e 1500mm entre pontas. Motor trifásico 400V/50Hz. Equipado com visor digital (DRO) de 2 eixos, torre porta-ferramentas de mudança rápida, sistema de refrigeração e proteção de segurança articulada no fuso. Máquina em bom estado de conservação, adquirida em 2020 e utilizada em ambiente de I&D. Ideal para oficinas de manutenção, ferramentaria ou produção de pequenas/médias séries. O comprador deve organizar/tratar da recolha. IVA incluído no preço Conventional Mechanical Lathe C6246VX / 1500mm - Year 2020: Universal mechanical lathe with 460mm swing over bed and 1500mm between centres. Three-phase motor, 400V/50Hz. Equipped with a 2-axis digital readout (DRO), quick-change tool post, coolant system, and a hinged safety guard over the spindle. Machine in good condition, purchased in 2020 and used in an R&D environment. Ideal for maintenance workshops, toolrooms, or small/medium-batch production. Buyer must arrange collection. VAT included in price.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, operating hours: 813 h, Matzek R-SW 1500 SV suction truck, built in 2023, 813 operating hours, tank capacity 1500 liters, side channel blower 7.5 kW, suction and pressure approx. 250 mbar, 2 spring-loaded rollers at the front 80 mm, wheels at the rear 130 mm, serial no. 232956/SV, suction machine for oil and chips Nwodpfxov Ix Abo Agrsl

Condition: ready for operation (used), Year of construction: 2019, Multi-spindle drilling machine manufactured in 2019. This COMEC FMOV 1500 6UF + CA2 features a working width of 1500 mm and a working depth of 300 mm, allowing for efficient processing of long workpieces up to 1500 mm in one cycle. It includes an automatic parts loader and pneumatic clamping for enhanced productivity. If you are looking to get high-quality drilling capabilities, consider the COMEC FMOV 1500 6UF + CA2 machine we have for sale. Contact us for further details. • Configuration: 6 multiple heads arranged on 3 working lines • Workpiece capacity: Drilling of long workpieces up to 1500 mm in one cycle • Working width (X): 1500 mm • Working depth (Y): 300 mm Nwjdszuhb Aepfx Agrsl • Max. clamping height: 70 mm • Top surface processing: Yes • Horizontal processing: Yes • Interchangeable aggregates: Yes • Positioning: Manual • Drilling feed: Pneumatic • Clamping: Pneumatic • Control: PLC with selectable work cycles • Modularity/customization: High • Cleaning and waste system: Integrated, efficient • Certification: CE Additional equipment • Automatic parts loader (synchronized with the machine cycle)

Year of construction: 2008, condition: good (used), Centralized dust, fume, and solid pollutant extraction system for industrial facilities. The VAC unit is an ideal choice for a high vacuum system for welding fume extraction and dust removal from grinding and polishing processes. Capacity: 1,500 m³/h at 20,000 Pa vacuum Max vacuum: 22,000 Pa Nwedpfxopug Dpo Agrsl Inlet diameter: 135 mm Motor power: 22 kW Includes FlexFilter DX filtration unit with ATEX explosion relief panel (the panel discharges pressure in the event of an explosion). Separation efficiency: approx. 99.95% (fine dust) Additional cartridge filters on the clean air outlet. Noise silencer. The device is equipped with a new set of filter bags.

Condition: used, Year of construction: 2002, Technical details: rated capacity: 1670 kVA rated capacity: 1500 KW voltage: 400 / 50 V / Hz Number of working hours: 800 h This UPS system is ideal for fault-free operation under the demanding environmental conditions that can occur in industrial applications. Suitable for stabilizing mains systems, for example. The UPS system consists of the Powerbridge (a flywheel mass with attached generator) and a Uniblock (electric motor/generator block). The Uniblock supplies the power for the customer modules without grid faults. The Powerbridge serves as energy storage. In the event of a mains failure, the Powerbridge briefly takes over the power supply (at full load, the power supply is maintained for 39 seconds). Energy storage unit type PB60+ with bridging time 39sec. A diesel engine is connected via an overrunning clutch. This means that as soon as the engine has reached the speed of the Unibklock, it pulls the generator up to the synchronous speed and thus takes over the power supply. At the same time, the Powerbridge is supplied with energy again. Nodpfxou Nzwus Agrewl *

Condition: new, Year of construction: 2026, SCV15000TC VIBER BIG-BAG is a professional industrial dust extraction system designed for large woodworking facilities and industrial production lines. Equipped with two high-capacity BIG-BAG containers, it ensures maximum operational continuity and simplified handling while minimizing downtime. It is an ideal solution for extracting sawdust and dust from high-demand machinery requiring highly efficient air filtration. Key Advantages Nwjdpfx Agoup Diforol Capacity of 15,000 m³/h – ensures effective extraction even in the most demanding industrial applications 18.5 kW power output – high-efficiency S1-duty motor designed for continuous operation in harsh conditions VIBER system – automatic filter shaking system extending filter lifespan TC housing – fully sound-insulated enclosure reducing noise and vibration Two BIG-BAG containers – significantly increased waste capacity and more convenient unloading REHEAT – heat recovery system from exhaust air, reducing energy losses DAMAGE PROTECT – mechanical protection of the impeller and suction duct against damage caused by large objects Construction and Technology The SCV15000TC VIBER BIG-BAG is built on a rigid steel structure designed for intensive use in demanding industrial environments. The chip extraction fan features a dynamically balanced impeller with aerodynamically optimized blades, ensuring consistently high performance with low noise levels. The filtration unit consists of 117 polyester filter cartridges with a filtration surface area adapted to intensive dust extraction processes. Precision and Performance Thanks to high vacuum pressure and a large inlet diameter (400 mm), the extractor efficiently removes chips, dust, and sawdust from multiple workstations simultaneously. The design allows operation as a central extraction system, enabling full integration with an entire production line. High energy efficiency and the automatic filter cleaning system significantly reduce the need for frequent servicing, lowering operating costs. Applications The SCV15000TC VIBER BIG-BAG is recommended for operation with: panel saws and sliding table saws wide belt sanders edge banders and CNC milling machines automated woodworking and wood-based material processing lines Standard Equipment VIBER automatic filter cleaning system Polyester filters (117 pcs) TC sound-insulated housing DAMAGE PROTECT protection system Control cabinet with main switch Two BIG-BAG containers with support frames Technical Specifications Power supply voltage: 400 V Motor power: 18.5 kW Rotational speed: 3000 rpm Filter type: Polyester, 5 microns / filter category “G” Filter dimensions: Ø160 × 960 mm Filtration area: 59 m² Number of filters: 117 pcs Inlet diameter: 400 mm Capacity: 15,000 m³/h Vacuum pressure: 3000 Pa Air velocity: 40 m/s Noise level: 80 dB Number of BIG-BAGs: 2 pcs BIG-BAG capacity: 1250 L each / 2500 L total Dimensions (L × W × H): 3850 × 1500 × 3800 mm Weight: 1150 kg

Condition: new, Bernardo universal lathe Solid 460 x 1500 Pro Vario Technical specifications center width: 1500 mm center height: 230 mm Swing diameter over bed: 460 mm Swing diameter over cranking: 690 mm Swing diameter over cross slide: 274 mm bed width: 300 mm spindle bore: 80 mm spindle mounting: DIN 55029, D1 - 8 Speed range, 2 steps: 25 - 250 / 250 - 1700 rpm range of longitudinal feeds: (42) 0,031 - 1,7 mm/rev Range face feeds: (42) 0.014 - 0.784 mm/rev Metric threads: (41) 0.1 - 14 mm inch threads: (60) 2 - 112 Gg/1" Quill diameter: 60 mm quill travel: 130 mm quill mount: MK 4 Motor power: 5,5 kW (7,5 PS) Machine dimensions: (W x D x H) 2750 x 1080 x 1370 mm Nedpfx Agsnfu Amorowl weight approx. 2050 kg Scope of delivery 3-axis digital display ES-12 V with LCD display 3-jaw chuck PS3-250 mm / D8 Fixed steady rest - passage diam. max. 150 mm Moving steady rest - passage diam. max. 110 mm Initial filling with Shell Tellus 46 Clamping disc 450 mm Quick-change toolholder with 4 inserts Safety device for quick-change toolholder Foot pedal with brake function according to CE Coolant device Frequency converter Slipping clutch Change gears Reducing sleeve 2 centering points Threaded clock LED machine light Chip rear wall Operating tool Rapid traverse longitudinal and plane

Condition: excellent (used), Year of construction: 2009, Vertical glass washing machine Working height: 1500 mm Open top Glass thickness: 2 - 13 mm Working direction: from right to left Washing machine consists of: - 2 brushes (1 pair), - 2 pcs. of air knives, - 1 stainless steel water tank separated in 3 parts (1 part with water heating), - motorized inlet and outlet conveyors, - outlet conveyor is with inspection lamps. The speed of movement of the conveyor is regulated by inverter Nwedpfxsy Na Rnj Agrjl Total floor dimensions: L 4900 x W 1500 x H 2650 mm Very good and clean condition Good working order, tested See video As is Available immediately

Condition: used, KELLENBERGER KEL-VARIA R175 x 1500 is a CNC cylindrical grinder engineered for high precision, top accuracy and reliable production. Capacities: centre height 175 mm, distance between centres 1500 mm, Z-axis 1650 mm, workpiece weight on centres max. 150 kg; grinding wheel Ø500×80 mm (bore 203 mm) or Ø400×63 mm (bore 127 mm); max wheel travel 320 mm. Key specs: wheel speeds stepless 1000–2150 rpm (peripheral speed 45 m/s); feed 7500 mm/min; work spindle swivels -10/+100° with 8–800 rpm; permitted load 160 Nm; grinding spindle motor 7.5 kW; work spindle motor 2 kW; 3×400 V 50 Hz; rapid 15 m/min; approx. weight 6000 kg; dimensions 4700×2300×2000 mm; air 6 bar. Accessories: coolant system, paper filtration, MARPOSS touch probe, set of grinding wheels, rotary centre, set of centers, set of workpiece drivers, set of throat gauges, lamp, 2 tool cabinets, tailstock with fine adjustment, oil mist extractor, spindle nose for collets. Achieves tight tolerances; typical applications: automotive, watchmaking, machine tool Njdpfx Agoyxn Itjrowl

Condition: new, Year of construction: 2026, Machine type: EVP 1500 Manufacturer: ERBA Power kW: 11 Total volume: 1500 L Description: The EVP 1500 vibratory finishing machine from ERBA features a flat working tank bottom without separation. It is ideally suited for larger and heavier workpieces. Emptying and/or separation is performed via bottom discharge (manual/pneumatic). Upon request, the machine can be equipped with reinforced suspension and a reinforced motor for higher loads. The motor speed can be continuously adjusted via a frequency converter (optional). The system can also be equipped with fully automatic PLC control (optional). ERBA vibratory finishing systems are known for their durability and longevity, which is also due to the hot-cast polyurethane lining of the working tank. As an experienced partner, we offer expertise in all aspects of vibratory finishing. Together with you, we develop efficient solutions for optimal process results. The stated price is net plus the currently valid statutory VAT and plus freight costs. Items shown in pictures may include accessories that are optionally available and subject to additional charges. The quoted price refers to the base machine. If you are interested, we look forward to hearing from you. We are happy to advise you without obligation. Nedpfoyq N Drox Agrowl The European Commission provides a platform for online dispute resolution (ODR platform). This offer serves exclusively as an online presentation of our goods. Contract negotiations are concluded via telecommunication (email, telephone, messaging portal). In the first step, we will provide you with a non-binding offer, along with information on our general terms and conditions including imprint and the right of withdrawal, before any purchase/contract conclusion occurs.

Condition: new, New refrigeration compressor (compressor) from the renowned manufacturer Copeland. Condition: New – warehouse stock (old stock), with no signs of operation. The compressor is factory-prepared, protected, and equipped with safety labels. Identification data (from nameplate): • Manufacturer: Copeland • Type: D3RS/1500/EWM7000 • Catalog number: 606.110.14 • Serial number: 356784 (BBC-YORK) • Design: semi-hermetic • Application: refrigeration / air conditioning system • Configuration: Block 1 • Start-up: U. Direct start (direct-on-line starting) • Equipment: Oil sump heater (Kurbelwannenheizung) Electrical data (from Copeland nameplate): • Power supply: 3~ 50 Hz • Speed: 1,450 rpm • Volumetric capacity: 49.90 m³/h • Voltage: 380–420 V (Y) • Starting current (LRA): 117–129 A Nwodpfeyga Utsx Agrol • Max. operating current (MRA): 28.8 A • Max. working pressure H/L: 25 / 20.5 bar • Test pressure H/L: 27.5 / 22.6 bar • Degree of protection: IP54 • Year: 1996 Oil (recommended): • Mineral: Fuchs KM / Suniso 3 GS / Capella WF 32 / Shell 22-12 The compressor is ideal as a new replacement part, for modernization of refrigeration or air-conditioning installations. Sale as shown in the pictures.

Condition: new, Year of construction: 2026, LUFT 1500 INVERTER Screw Compressor The LUFT 1500 INVERTER screw compressor combines state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Are you looking for a professional solution for powering pneumatic tools in a workshop, paint shop or production line? The CORMAK LUFT 1500 INVERTER screw compressor is an excellent choice. With an 11 kW motor and an impressive actual output of up to 990 l/min, it provides a continuous supply of compressed air required for efficient operation of impact wrenches, blow guns and painting tools. This model has been designed for continuous-duty operation, making it ideal for demanding applications such as tyre service centres, large automotive workshops and manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The LUFT 1500 INVERTER features a direct-drive system, providing significantly higher efficiency and lower power losses compared with belt-driven models. This innovative solution ensures optimal utilisation of the motor's power, resulting in higher performance and lower energy consumption. The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM electronic control panel, giving the operator access to key compressor information and greater flexibility and control over the production process. Key Parameters ✅ Pressure: up to 10 bar ✅ Air output: up to 1,580 l/min ✅ Motor power: 11 kW Technical Specifications Parameter Specification Motor power 11 kW Nedjxnxzaspfx Agrewl Voltage 400 V / 50 Hz Output at 0–6 bar 1,620 l/min Output at 6 bar 1,580 l/min Output at 8 bar 1,350 l/min Output at 10 bar 1,230 l/min Outlet connection diameter (G) 1" Dimensions 1170 × 730 × 1020 mm Weight 243 kg Manufacturer Cormak

Condition: used, Year of construction: 2019, battery capacity: 1,376 Ah, battery voltage: 80 V, overall weight: 2,500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Battery type: 8 PzS Nominal voltage: 80 V Capacity: 1,376 Ah Voltage in idle state: 88.89 V Suitable for: Linde E70 and E80 Dimensions & Weight Dimensions (L x W x H): 1,290 x 1,030 x 770 mm Net weight: 2,500 kg All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 1156 Nwedpjzz H Dpofx Agrol

Condition: new, Year of construction: 2025, working width 1500 mm Nedox H Tvfepfx Agrowl workpiece width - max. 0,5 - 50 mm dimensions 3300 x 1500 x 1800 mm feed stepless 0-4 m/min total power requirement 20,4 kW weight of the machine ca. 2800 kg The SBM-L G1S2 grinding and deburring machines were developed for double-sided deburring and edge rounding of workpieces in a single operation. LISSMAC machines are used for deburring sheet metal and processing sheet metal parts, laser parts, and stamped parts. The L series is equipped with three units on the top and bottom . Workpieces made of stainless steel, steel, aluminum or non-ferrous metal can be processed on the top, bottom or both sides. Processing sheet metal on both sides and rounding edges in a single operation saves up to 60% in time. It is also possible to easily connect automation solutions or integrate the machine into production lines. The machine design ensures ergonomic working and a pleasant working environment without dirt, dust, or noise pollution. Consisting of: - SBM-L 1500 G1S2 evo grinding machine - 4x SBM 1500 grinding belts with P60 Co web - 2x SBM-L 1500 grinding belt L=4123 W=70 P80 Co - SBM-M/L 1500 sound insulation - LIServ 4.0 package evo - Camera set MP - Dry extraction DDE 3002 - Standard piping DDE 3002 The machine is available for immediate delivery from our warehouse in Niederlangen.

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,500 mm, travel distance Y-axis: 680 mm, travel distance Z-axis: 670 mm, total height: 2,700 mm, overall weight: 5,350 kg, spindle speed (max.): 8,000 rpm, product length (max.): 5,440 mm, number of axes: 3, This 3-axis MICROCUT Challenger VM-1500 was manufactured in 2007. It features a table size of 1,500 x 660 mm, capable of handling a maximum weight of 1,000 Kg. The machine offers X, Y, and Z travels of 1,500 mm, 680 mm, and 670 mm respectively, with a rapid traverse rate of 20 m/min. It includes a BT 40 spindle taper and a spindle speed up to 8,000 rpm. Contact us for more information about this machine. • Table dimensions: 1.500 x 660 mm • Max. table weight: 1.000 kg • X/Y/Z rapid traverse: 20 m/min • Tools station: 24 positions • Max. tool diameter: 80 mm (150 mm) Nwedpfxeyg Hapo Agrol • Max. tool length: 300 mm Technical Specification Taper Size BT 40