Used Chemspeed Asw2000 Parallel Synthesiser for sale (746)

Condition: used, This listing is for a Chemspeed ASW2000 Parallel Synthesiser ASW2000: Automated synthesis workstation The ASW platform enables you to do automated and unattended synthesis integrating work-up and analysis during or at the end of the synthesis. Dusdpfxoxzg Nfe Ad Njt 1. Transfer your chemistry to an automated synthesizer without restrictions or compromises: reactors in glass (maximum temperature range) and reagent handling under completely inert conditions. 2. Automated and unattended synthesis with complete process integration - from reagent preparation to synthesis, work-up, analysis and output. 3. Modular systems that can be configured for solution and solid phase synthesis: switch between modes, even in one synthesis protocol, or mix the two modes.

Condition: excellent (used), Year of construction: 1971, Centre lathe (parallel lathe) Brand: SAFOP Model: LEONARD 1500 Year: 1971 Specifications: Max. swing over bed (bed with 4 guideways): 2,200 mm Max. swing over carriage: 2,000 mm Max. turning length: 10,000 mm Max. load between centres (without steadies): 15,000 kg Spindle speeds (4 ranges): 1–100 rpm Tailstock quill diameter: 190 mm Quill stroke: 310 mm Spindle motor power: 40 HP Dsdpfx Adjw Az Hdo Nsut Equipped with: 4-jaw chuck, dia. 2,000 mm 3 roller steadies

Condition: used, Year of construction: 2005, Shrink-tunnel Additional title: with 2 parallel belts (incl. sleeve fit control) Air volume: 700 m³/h Engine speed: 900 rpm Power: 0,25 kW Length: 3 m Width: 1,25 m Dujdpfx Ajvcq E Ded Net Height: 2,1 m Weight: 500 kg Operation / Control: with control panel for each conveyor Features: Two parallel conveyors going through the unit coming from 2 sleevers, optical sleeve fit control with conveyor stop

Condition: used, functionality: fully functional, spindle bore: 62 mm, turning diameter: 410 mm, center height: 205 mm, turning length: 1,500 mm, type of input current: three-phase, Parallel lathe Norwich Orion Mod. c 6241 / YZ 1500 Centre height: 205 mm Swing over bed: 410 mm Distance between centres: 1500 mm Bar passage: 62 mm Dedpey N T R Ijfx Ad Neut Main motor power: 5.5 HP Steadies included

Condition: used, Workbench vice, parallel vice LEINEN with dovetail guide and height adjustment. Model: 125. Jaw width: 125 mm. Jaw height: 23 mm. Clamping range: max. 200 mm. Overall height: 550 to 750 mm. - 360° rotatable. - Dovetail guide. - Anvil surface for light straightening work. - Approx. 200 mm height adjustment without lift system. Weight: 44.5 kg. Good condition. Duedsy E T Dyopfx Ad Nst

Condition: good (used), functionality: fully functional, Technical Specifications HBX 360 Distance between centres (mm): 750 Centre height (mm): 180 Maximum diameter over bed (mm): 360 Maximum diameter over cross slide (mm): 180 Spindle bore (mm): 37 Maximum cross slide travel (mm): 180 Cross slide width (mm): 160 Tailstock quill travel (mm): 150 Dsdpfey D Ablex Ad Nsut Tailstock quill diameter (mm): 46 Bed width (mm): 335 Compound travel (mm): 110 Compound width (mm): 110 Quick-change toolpost type Spindle taper type Tailstock Morse taper: MT5 Spindle speed (rpm): 50 to 3000 Spindle speed variator: Yes (hydraulic) Spindle motor power (kW): 4.5 Transverse feed range (m/min): 0.0125 to 5.6 Longitudinal rapid traverse feed range (m/min): 56 to 112 Thread cutting: Yes Metric threading range (mm): 0.5 to 56 Whitworth threading range (TPI): 1/2 to 56 Foot brake Electric supply: 380V three-phase Dimensions (mm): 2000 x 1000 x 1250 Weight (kg): 1300 Chuck: Manual Ø200 (3-jaw) Equipment: - 2-axis Heidenhain digital readout - Machine lighting - 3-jaw manual chuck - Quick-change toolpost

Condition: used, Parallel Lathe SCULFORT MAXICAP type 315-3000 R Between points: 3000 mm Maxi Ø on bench: Ø 635 mm Maxi Ø over saddle: Ø 470 mm Maxi diameter in brocken bed: Ø 1000 mm x Width 200 mm Spindle motor: 13 CV Spindle diameter: Ø 71 mm Rotation: from 20 to 1300 RPM Square turret GOODSHAPE 3-jaws chuck Ø 380 mm Dsdpfxsyz Aw Uj Ad Neut Threadings: Metric + Whitworth Tailstock: CM5 Feeds: longitudinal + transversal auto advances Equipped with: 1 lubricant pump + 1 face plate Ø 1000 mm Equipped with: 2 fixed steadies: Ø 380 mm + Ø 1000 mm Voltage: 380 V Dimensions (L x W x H): 5200 x 1600 x 1700 mm Weight: approx 5 T

Condition: used, Year of construction: 1987, spindle bore: 105 mm, Parallel Lathe PBR type TM-30 Between points: 3000 mm Maxi Ø on bench620 mm Maxi Ø over saddle: 400 mm Maxi diameter in brocken bed: 860 mm Spindle diameter: Ø 105 mm Spindle speed: from 15 to 1500 RPM 3-jaws chuck Ø 315 mm Year of construction: 1987 Motor: 15 CV Threadings: Metric + Whitworth Tailstock CM5 Scale 2 axes Equipped with: one 3-points fixed steady Rapid Feed non-functional: 1 way Automatic travel X + Z is not functionnal Voltage: 380 V Dujdpfx Aoyyynzod Not Dimensions (L x W x H): 4900 x 1500 x 1700 mm Weight: 4,5 T

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 420 mm, spindle bore: 105 mm, turning diameter: 660 mm, center height: 330 mm, turning length: 2,000 mm, total length: 3,500 mm, total width: 1,400 mm, total height: 1,600 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 36 rpm, overall weight: 3,700 kg, EX-STOCK PROMOTIONAL OFFER! NEW "CE" CERTIFIED. LATHE WITH MECHANICAL CLUTCH 3-AXIS DRO AND SEMI-NORTON GEARBOX. EQUIPPED WITH JOYSTICK FOR RAPID FEED ENGAGEMENT. ONE-PIECE CAST IRON BED. Center height: 330 mm Max swing over bed: 660 mm Max swing over carriage: 420 mm Max swing in gap: 870 mm Tool height: 32 mm Distance between centers: 2000 mm Spindle bore: 105 mm Spindle mount: Camlock D1-8 Spindle speeds: (12) 36 ÷ 1600 rpm Longitudinal feeds: 0.063 ÷ 2.52 mm/rev Cross feeds: 0.027 ÷ 1.07 mm/rev Metric threads: (22) 1 ÷ 14 mm Imperial threads: (26) 2 ÷ 28 TPI Tailstock taper: MT 5 Motor: 400 V 50 Hz 7.5 kW Coolant pump: 400 V 50 Hz 90 W Dimensions: 3500 x 1400 x 1600 mm Net weight: 3700 kg INCLUDED IN DELIVERY: 320 mm Ø three-jaw self-centering chuck, reversible jaws 400 mm Ø four-jaw independent chuck 600 mm Ø faceplate Travelling steady Fixed steady Rotating tailstock center MT 5 Thread chasing dial Leadscrew guard Tool post guard Spindle guard Rear splash guard Quick-change tool post type C LED work lamp Cooling system Electro-mechanical foot brake Dsdpfxsyyn Dds Ad Nout Quick-lock tailstock carriage Carriage gears in oil bath Adjustable leveling pads

Condition: used, used parallel vice for use on a magnetic clamping plate, ground on all sides jaw width: 100 mm Dujdpfo Uvmvjx Ad Njt Jaw depth: 40 mm Clamping length: 120 mm

Condition: good (used), Parallel joint system for thread cutting machine, telescopic arm drill holder, drill, rotary drill, magnetic drill, impact drill -Parallel joint system: for thread cutting machines, drill press holders or similar uses -Hole: Ø 36 mm Dusdpfx Asyuu H Hod Net -Dimensions: 535/80/H770 mm -Weight: 21.9 kg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 690 mm, spindle bore: 155 mm, turning diameter: 1,090 mm, center height: 500 mm, center width: 700 mm, turning length: 3,000 mm, Parallel Lathe ZMM-SIBIMEX CU 1000/3000 Year of manufacture: 2007 CE certified Excellent overall condition Centre height: 500 mm Dodpfxjylazwj Ad Nsut Maximum turning length: 3000 mm Swing over bed: 1090 mm Swing over carriage: 690 mm Swing in gap: 1250 mm Spindle bore: 155 mm Bed width: 700 mm Motor power: 22 kW Approx. weight: 8000 kg Number of speeds: 24 Spindle speed range: 6.3 - 1250 rpm Speed range Machine complete with fixed and travelling steady rests Self-centering chuck 4-jaw faceplate Powered tailstock Elbo axis DRO Rapid traverse on feeds

Condition: good (used), functionality: fully functional, Parallel Lathe Safop 430 - 820 Travelling Bed Variable Turning Capacity: 430 x 2000 - 430 x 3000 Turning on Faceplate: 830 x 1000 Steady Rest Digital Readout Dsdpfx Asyi Ecbsd Nout Used Machine Internal Code Car

Condition: used, Parallel Lathe SCULFORT type MAXICAP SENIOR 380 x 4000 RN Between points: 4000 mm Maxi Ø on bench: Ø 780 mm Maxi Ø over saddle: Ø 580 mm (rear trolley dismantled) - Ø 500 mm (without rear trolley dismantled) Maxi diameter in brocken bed: Ø 1160 mm Width in brocken bed: 400 mm Spindle: Ø 80 mm Spindle speed: from 16 to 1280 RPM Square turret 3-jaws chuck Ø 400 mm Threadings: Metric + Withworth Duedpfjyarw Hox Ad Nst 3 points steady max Ø 350 mm Tailstock CM6 Motor power: 13 CV Feeds: auto transverse + longitudinal Clutch rapid used Lubricant tank Dimensions (L x W x H): 6500 x 1800 x 1900 mm Weight: approx 7 T

Condition: used, gauge block box, gauge blocks, gauge block holder, parallel support, parallel support pair, plane-parallel measuring leg -Manufacturer: Koba, parallel gauge block set -Gauge block holder: 0-200 -Gauge block set: not complete, see photos for contents -Dimensions case: 545/210/H45 mm Dodju H R D Eopfx Ad Nsut -Weight: 5.0 kg

Condition: used, Parallel Lathe WEISSER HEILBRONN Djdpfoxpufqsx Ad Neut Between points: 1100 mm Maxi Ø on bench: 440 mm Maxi Ø over saddle: 230 mm Cone: CM4 Spindle diameter: Ø 45 mm Spindle speed: from 45 to 2000 RPM TRIPAN Turret 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2500 x 1300 x 1500 mm Weight: approx 2 T

Condition: used, Parallel Lathe GEMA LZ 160 Between points: 1000 mm Dusdsxpuf Rjpfx Ad Nst Maxi Ø on bench: 310 mm Maxi Ø over saddle: 180 mm Maxi diameter in brocken bed: Ø 420 mm x Length 200 mm Spindle diameterØ 44 mm Spindle speed: from 48 to 1500 RPM TRIPAN Turret Supplied with 2 tool holders 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock: CM3 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2100 x 800 x 1300 mm Weight: approx 1,3 T

Condition: used, Parallel vice with electric clamp Dujdpfx Asby Uycsd Njt Jaw width 275 mm

Condition: good (used), Year of construction: 2000, Heavy-duty lathe ERNAULT SOMUA P72 with 3 guideways diameter over bed 2200mm diameter over carriage 2000mm speed 1.5 to 3000rpm - 75 HP machine weight 39t admitted weight 16t machine visible in operation Dujdpfx Aoxq D Tyjd Not

Condition: new, Parallel lathe with clutch and display Fervi T085F10 with mechanical clutch, 3-axis display and semi-norton gear box. Possibility of 2000 and 3000 mm distance between centers. WITH MECHANICAL CLUTCH, 3-AXIS DISPLAY AND SEMI-NORTON GEAR BOX. EQUIPPED WITH JOYSTICK FOR ENTERING RAPID FEEDS. WITH SINGLE-BLOCK CAST IRON BASE. Center height 330 mm Max. diameter over bed 660 mm Max. diameter over carriage 420 mm Max. diameter over pocket 870 mm Tool height 32 mm Distance between centers 1000 mm Bar passage 105 mm Spindle attachment Camlock D1-8 Spindle speed (12) 36 - 1600 rpm Longitudinal feeds 0.063 - 2.52 mm/rev Cross feeds 0.027 - 1.07 mm/rev Metric threads (22) 1 - 14 mm Inch threads (26) 2 - 28 TPI Tailstock taper CM 5 Motor 400V 50 Hz 7.5 kW Coolant pump 400V 50 Hz 90 W Dimensions 3000 x 1400 x 1600 mm Net weight 3330 Kg Accessories included: Self-centering chuck with 3 reversible jaws Ø320 mm Platform with 4 independent jaws Ø 400 mm Flange Ø 600 mm Mobile steady rest Fixed steady rest Rotating tailstock CM 5 Duedpfxsvbqt Se Ad Nst Thread comparator Lead screw protection Turret protection Spindle protection Rear splash guard Quick change turret type C LED lamp Cooling system Electro-mechanical foot brake Quick locking tailstock carriage Oil bath gears Adjustable leveling feet

Condition: new, Parallel lathe with display Fervi T075/400V3A. Monoblock cast iron base. Height of Centers 230 mm Max. diameter on Bench 460 mm Max. diameter on Carriage 270 mm Max. diameter on Slot 690 mm Tool Height 25 mm Distance between Centers 1500 mm Distance between Guides 300 mm Bar Taper CM MT7 Bar Passage 58 mm Spindle Attachment Camlock D1-8 Spindle Speed (12)25-1700 rpm Longitudinal Feeds (42) 0.031 - 1.7 mm/rev Cross Feeds (42) 0.014 - 0.784 mm/rev Metric Threads (41) 0.1 - 14 mm Inch Threads (60) 2 - 112 TPI Tailstock Spindle Stroke 130 mm Tailstock Taper CM MT4 Motor 400 V 50 Hz 5.5 kW Coolant Pump 400 V 50 Hz 90W Machine Dimensions 2750 x 1080 x 1370 mm Net Weight 2020 kg Total Dimensions 2870 x 1180 x 1570 mm Gross Weight 2200 kg Accessories Included: 3-jaw self-centering chuck Ø250 mm / D1-8 4-jaw self-centering chuck Ø300 mm / D1-8 Drive flange Ø350 mm Fixed steady rest Moving steady rest Reduction bushing CM 7 / 4 Fixed tailstock CM 4 Rotary tailstock CM 4 Dujdpsvbqv Hjfx Ad Net Thread comparator Turret guard Spindle guard Rear splash guard Quick change turret type B LED lamp Cooling system Electromechanical foot brake Bathed carriage gears oil Quick-lock tailstock carriage

Condition: good (used), Tovaglieri parallel lathe Used, from school provenance. Very good condition. Height of centers : mm 180. Distance between centers : mm 700. Bar passage : mm 45 Supplied accessories No. 4 available except sold Duedpfx Aekt U E Isd Net

Condition: new, Parallel lathe with clutch and display Fervi T085F10 with mechanical clutch, 3-axis display and semi-norton gear box. Available in stock subject to prior sale. WITH MECHANICAL CLUTCH, 3-AXIS DISPLAY AND SEMI-NORTON GEAR BOX. EQUIPPED WITH JOYSTICK FOR ENTERING RAPID FEEDS. WITH SINGLE-BLOCK CAST IRON BASE. Technical data: Center height 385 mm Max. diameter over bed 770 mm Max. diameter over carriage 575 mm Max. diameter over pocket 1050 mm Tool height 32 mm Distance between centers 1000 mm Bar passage 105 mm Spindle attachment Camlock D1-8 Spindle speed (12) 36 - 1600 rpm Longitudinal feeds 0.063 - 2.52 mm/rev Cross feeds 0.027 - 1.07 mm/rev Metric threads (22) 1 - 14 mm Inch threads (26) 2 - 28 TPI Tailstock taper CM 5 Motor 400V 50/60 Hz 7.5 kW Coolant pump 400V 50/60 Hz 90 W Dimensions 2500 x 1550 x 1700 mm Net weight 3250 Kg Gross weight 3250.00 kg Accessories included: Self-centering chuck with 3 reversible jaws Ø 320 mm Platform with 4 independent jaws Ø 400 mm Flange Ø 600 mm Mobile steady rest Fixed steady rest Rotating tailstock CM 5 Thread comparator Lead screw protection Turret protection Spindle protection Rear splash guard Quick change turret type C Djdsvbqlhjpfx Ad Nsut LED lamp Cooling system Electro-mechanical foot brake Quick locking tailstock carriage Oil bath gears Adjustable leveling feet

Condition: new, Parallel lathe with clutch and display Fervi T085F10 with mechanical clutch, 3-axis display and semi-norton gear box. Available with distance between centers also 2000 and 3000 mm. WITH MECHANICAL CLUTCH, 3-AXIS DISPLAY AND SEMI-NORTON GEAR BOX. EQUIPPED WITH JOYSTICK FOR ENTERING RAPID FEEDS. WITH SINGLE-BLOCK CAST IRON BASE. Technical data: Dedpfovbquiex Ad Nout Center height 280 mm Max. diameter over bed 560 mm Max. diameter over carriage 360 mm Max. diameter over pocket 770 mm Tool height 32 mm Distance between centers 1000 mm Bar passage 105 mm Spindle attachment Camlock D1-8 Spindle speed (12) 36 - 1600 rpm Longitudinal feeds 0.063 - 2.52 mm/rev Cross feeds 0.027 - 1.07 mm/rev Metric threads (22) 1 - 14 mm Inch threads (26) 2 - 28 TPI Tailstock taper CM 5 Motor 400V 50/60 Hz 7.5 kW Coolant pump 400V 50/60 Hz 90 W Dimensions 2500 x 1400 x 1500 mm Net weight 2920 Kg Gross weight 3555.00 kg Accessories included: Self-centering chuck with 3 reversible jaws Ø 320 mm Platform with 4 independent jaws Ø 400 mm Flange Ø 600 mm Mobile steady rest Fixed steady rest Rotating tailstock CM 5 Thread comparator Lead screw protection Turret protection Spindle protection Rear splash guard Quick change turret type C LED lamp Cooling system Electro-mechanical foot brake Quick locking tailstock carriage Oil bath gears Adjustable leveling feet

Condition: used, Parallel Lathe MULLER & PESANT Between points: 2500 mm Maxi Ø on bench: 520 mm Maxi Ø over saddle: 280 mm Maxi diameter in brocken bed: 700 mm Spindle diameter: Ø 56 mm Spindle speed: from 12,5 to 1000 RPM TRIPAN Turret 3-jaws chuck Ø 250 mm Tailstock CM4 Auto feeds longitudinal + transversal Dujdexnpwropfx Ad Nst Lubricant pump Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1600 mm Weight: approx 3,5 T