Used Classification Separator Le Filler for sale (19,322)

Condition: refurbished (used), Year of construction: 1995, Dust separator, dry sand screening unit. Throughput capacity: 160 tons/hour. Motor: 50 kW to 150 kW, depending on requirements. Current motor: 75 kW. New bearings. Interior lining with wear-resistant sheet metal. Disassembled and ready for transport. Equipped with a suction system and a hot air drying system. Gbedpfx Ajim D S Sofuou

Year of construction: 2003, condition: reconditioned (used), Machine inspected. Disassembled and ready for container transport (2). Wear-resistant liners. New bearings. Gbsdpfxjizkxws Afuju Throughput capacity of 160 tons per hour. 50 kW to 150 kW motor, depending on requirements. Current installed motor: 75 kW.

Year of construction: 2022, condition: good (used), functionality: fully functional, REF: MM6470 Volumetric filling and sealing system for pre-made pouches (doypacks). Rotary Volumetric Filler mounted on stainless-steel frame with 1 x Pre-made pouch (doypack) filling and sealing machine. Manufacturer - Qinyao/Top Y Machinery. Date of manufacture - 2022. Setup of volumetric filling system: Stainless-steel large infeed hopper over Rotary volumetric cup filler (freestanding) with nylon volumetric cups. Setup of pre-made pouch fill and seal machine: Twin-lane bag magazine (lanes 1# and 2#), vacuum pick-up and bag opening (1#Sucking, 2#Sucking, Pick Up Bag, Open Bag), front and back sealing jaws with sponge-faced grippers, Siemens Smart Line HMI, Omron controllers for front jaw, back jaw and printer, thermal transfer ribbon coder and discharge chute. Gbjdpfx Aszp E T Sefuou Speed – variable up to 20 packs / minute, depending on fill volume. Pack size range – can handle doypacks up to 300mm long x 250mm wide. Controls – Siemens Smart Line HMI touch-screen control with easy-to-use programme settings. Tooling – 1 x Set of volumetric cups, previously used to pack whey protein products (1000g volume), dried fruit (200g volume) and other dry ingredients (depends depending on product). Supplied with a fill head attachment for plastic scoops as the material is deposited. Electrical requirements - 3 phase. Requires compressed air supply. Condition – Very good, likely has a total use of one year production. *Please note* - the pre-made pouch (doypack) filler and sealer has previously been used / fed by a linear weigher and a multi-head weigher depending on what the products being packed were.

Condition: used, Year of construction: 2004, functionality: fully functional, REF: MM6444 Cimec America AM DPS 9-8-1C-1VA rinser, filler and capper monoblock. Manufacturer: C.I.M.E.C., Italy. Serial number 045, built 2004. CE marked, with EU Declaration of Conformity. A compact monoblock with 9 rinsing nozzles, 8 isobaric (counter-pressure) filling valves, a crown capping head and a ROPP capping head, for still or carbonated drinks in glass bottles. Carbonated product needs to be carbonated before filling. The machine does not include a carbonator. Filling Single pre-evacuation with CO2 bottle purge (not double pre-evacuation) No vacuum pump fitted Up to 2,000 bottles per hour (owner's figure), depending on bottle size and product Capping ROPP (screw cap) head enabled, set up for 28mm ROPP caps on MCA bottle finish Crown capping head disabled. The current owner never used it and its condition is unknown. An engineer would need to assess what is required to bring it back into use Change parts 330ml, currently fitted 200ml Gbodpey Um Anefx Afuju Not included Conveyors, drive or accumulation table CIP system Also included Spare seals, wear parts and spares for the filling heads, pedestals, rinser and drive train Spare parts list Condition Last in production in August 2025, when it was fully operational. Now in storage. The owner describes the machine as well used and in working order, but needing an engineer to get it fully up to speed. Videos of it running are available on request. Electrical 400V, 50Hz, 3-phase, 4.5kW Dimensions Approx. 3.5m long x 1.4m wide x 2.1m high (2.6m at the capper) Weight: to be confirmed. Documentation EU Declaration of Conformity and operator manual (English) for this serial number. Location Aylesbury, UK. (in storage) Viewing by appointment

Condition: good (used), Year of construction: 2019, functionality: limited functionality, Equipment: documentation/manual, Volumetric filling of liquid and viscous foods such as sauces, oils, marinades, dressings, or similar products into suitable containers (e.g., trays, bags, cans, jars, cups). Basic configuration: Stainless steel frame with integrated product hopper, filling station with 5 piston cylinders and filling valves, drive unit, control unit. Product hopper: - Made of stainless steel, with removable lid. - Fill level sensor for detecting the product level in the tank and automatic replenishment by upstream pumps/containers. Product-contact components made of stainless steel or food-grade materials, easily disassembled for cleaning. Gjdpfeyitb Eox Afujbu Filling valves available as fixed or with tracking movement to follow the motion of the packaging material and achieve higher output rates.

Condition: used, Year of construction: 2021, AVE UNIBLOCK 16/16/4 Bottle fillers." However, I can suggest common features found in similar bottle filling machines, which may include: - Filling Type: Gravity, Pump, or Gravity/Pump combination. - Production Rate: Typically measured in bottles per hour or minute. - Number of Filling Heads: In this case, it could refer to a 16-head system, meaning it can fill 16 bottles simultaneously. - Bottle Size Range: Specifications may include the range of bottle sizes the machine can handle. - Control System: May involve PLC (Programmable Logic Controller) for operations. - Material Construction: Stainless steel or food-grade materials suitable for hygienic applications. - Dimensions and Weight: Overall dimensions and weight for installation considerations. - Power Requirements: Voltage and power consumption details. Bottle Sizes: 250 ml, 500 ml, 1 Litre , 2 Litre Cap Size: 38 mm Capacity: 6000 bottles per hour on 1 L Gbjdoz Hrnhspfx Afuju Stations: Rinser , Filler and Caper Condition: Excellent

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total height: 2,100 mm, total width: 1,100 mm, total length: 1,300 mm, overall weight: 800 kg, REF: MM5446 Gbodpfx Afsx Dbkcjuju Borelli Group S.r.L. inline rotary filling machine suitable for filling glass bottles. This is a standard 10-head rotary filler with complete CIP kit for cleaning, including dummy bottles and washing spray system. Also supplied with filler in-feed scroll and bottle handling parts for Bordeaux glass bottles. Technical specification: ✅ Manufacturer - Borelli Group S.r.L ✅ Model - RMC10. ✅ Date of manufacture - 2018. ✅ Speed - up to 1500 bottles/hour (for 750ml bottles). ✅ Throughput - 1300 litres/hour. ✅ Filling system - Pure gravity. ✅ Speed variator - Inverter. ✅ Voltage - 415 V / 50 hz / 3 phase. ✅ Pneumatic supply - 3-6 bar.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, REF: MM5770 1 x Cime Careddu automatic inline rinsing and filling machine for 1L bottles. Suitable for filling glass and PET bottles. Manufacturer - Cime Careddu Srl Model - SILVER 16/16 (16 x heads). Date of manufacture - 2012. Can handle and fill bottles up to 2 litres in capacity but this unit is supplied with change parts for 1 litre bottles. Overall dimensions - 2.8m L x 1.7m W x 2.25m H. Gsdpfsulpmzsx Afuobu In operation until January 2025, can be viewed working until this point. This unit is a very reliable system and has been very well maintained, used for 30-40 hours (approx) per week. 

Condition: excellent (used), Year of construction: 1995, machine/vehicle number: 47070001, For separating and separating light and impurities Drum diameter x width: 1,400 x 1,200 mm Godpfx Aeqi Eh Hefuebu Vibrating feeder Blower with V = 7,000 m³/h incl. steel construction, platform, railings, etc.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, REF: MM5771 1 x Canellitech Srl automatic inline monoblock filling and crown capping machine for 5L bottles supplied with infeed and outfeed conveyors. Was used for filling 5L bottles and applying push-on caps. Manufacturer - Canellitech Srl Model - 8-1 (8 x filling heads). Date of manufacture - 2019. Speed - up to 500 bottles per hour. Gbedpfxoulpu Sj Afusu Has been used very lightly between 2019 and 2023 (2 x days per month). Overall dimensions - 2.7m L x 1.1m W x 2.45m H.

Condition: ready for operation (used), Year of construction: 2011, - 10-head rotary bottle filling machine Gbjdpfxez Ry Dao Afuju - suitable for liquids such as wine, juices, sauces, beverages, oil, etc. - for bottles and/or jars

Condition: used, Manufacturer: Mineralwerke Type: PZ 250 M4 Godpfeh D Hmvjx Afuobu Voltage: 380 V Output: 55 kW Weight: 1950 kg

Condition: excellent (used), functionality: fully functional, Pamasol Single Stage Filler Gbedpfx Afsznw Aijusu Type: 2079 Device is in excellent condition, very little use. Unit was removed from the a "blue chip" pharma company operating in Cork, Ireland.

Condition: excellent (used), Year of construction: 2016, BAG-IN-BOX SEMI AUTO FILLING MACHINE Smurfit Kappa Vitop, ITALY, 2016 Bag filling volume from 1L to 28L Pouch-up filling volume from 1L to 3L Touch screen control panel The semi-automatic filling machine Vitop has been designed to fill liquid and semi-liquid products in bags and pouches. Improved shelf-life of liquid thanks to revolutionary filling valve that separates vacuum and nitrogen circuits Easy to operate and maintain Gsdpoyr Awbjfx Afuobu Precise electromagnetic flowmeter for filling accuracy Hygienic: Equipped with a cleaning a sanitizing program Suitable for Vitop® Original and Vitop® Compact Simple to adjust between sizes Optional laminar air flow for filling in ultra clean conditions Especially well-suited to medium and Pouch-Up® fillers, the semiautomatic filling machine Vitop offers excellent performances and reliability. The filler uncaps the tap, inhales air from the bag before filling, fills the bag/pouch with the required quantity of liquid and recaps the tap. Nitrogen is inflated at the end of the cycle in order to better preserve the product inside and help to clean the valve neck. An airflow hood (option) provides mechanical decontamination around the filling body area through overpressure.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, 16-head rotary filling machine with 2 checkweighers Gjdpfjzlhy Hjx Afusbu year: 2020

Condition: used, Year of construction: 2013, Overview This KOSME Barifill RFC 50-60-10 VKP rinser - filler - capper block, built in 2013, is designed for the rinsing and filling of glass bottles in beverage production lines. The block combines a 50-station single-channel rinser, a 60-valve glass bottle filler with short-tube VKP filling system and a Zalkin CA9 360 NG rotary capping section in one compact stainless steel machine. With approx. 16,000 bottles/hour on 0.75 L and approx. 20,000 bottles/hour on 0.33 L, the block sits in an attractive mid-range capacity class for water, beer, cider, wine and other glass-bottle applications. Integrated foam cleaning supports hygienic operation; the machine is operated via a touchscreen HMI on an articulated suspension arm and is enclosed in transparent protective safety guarding with safety interlocks. The machine is still installed and under power and underwent extensive maintenance in Q4/2025. Please note: the Zalkin capping heads are not included in the sale price - the capper base machine is included; the 10 capping heads are optionally available. Technical data - Manufacturer: KOSME S.r.l. - Model: Barifill RFC 50-60-10 VKP - Year of manufacture: 2013 - Machine type: rinser - filler - capper block for glass bottles - Filling system: short-tube VKP, 60 filling valves, 113 mm pitch - Rinser: 50 stations, single-channel, 113 mm pitch - Capper: Zalkin CA9 360 NG (2013), 10 capping positions, approx. 22,000 bottles/hour (capping heads not included in the sale price, optionally available) - Capacity: approx. 16,000 bph at 0.75 L / approx. 20,000 bph at 0.33 L - Foam cleaning: integrated - Control: touchscreen HMI on articulated suspension arm - Electrical supply: 400 V, 50 Hz, 17 kW installed power, 38 A - Compressed air: 6 bar, approx. 450 Nl/min - Water: 4 bar, approx. 3.5 m³/h - Machine weight: approx. 10,500 kg Equipment - KOSME Barifill RFC 50-60-10 VKP main machine - 50-station single-channel rinser - 60-valve glass bottle filler, short-tube VKP filling system - Integrated foam cleaning - Zalkin CA9 360 NG capper base machine - Touchscreen HMI on articulated suspension arm - Stainless steel machine frame with transparent protective guarding and safety interlocks - Process piping, vacuum / air equipment, stainless steel bottle handling - Layout drawing available - Optionally available (not included in the sale price): Zalkin capping heads Condition Used - installed in an industrial production environment and still under power. The machine underwent extensive maintenance in Q4/2025 and can be visited and inspected in operation on request. Gbsdpozi I T Isfx Afueu Availability From November 2026 (week 45). Location: Germany.

Condition: used, Year of construction: 2023, Overview This Braumanufaktur Werk II Fillmaster R18 is a compact isobaric rinsing, filling and crown-capping monoblock for glass bottles, built in 2023 by Braumanufaktur Werk II (Großalmerode, Germany). It is sold as a complete craft-scale bottling set for carbonated beverages together with a 750 L fermentation and carbonation tank (SM Inox, 2021) and a 330 L pressure loading tank (SM Inox, 2023). The monoblock combines 6 rinsing stations, 6 isobaric filling valves and 6 crown-capping heads in a single compact unit. CO₂ pre-saturation of the bottles before filling reduces oxygen pickup and product oxidation. Mechanical movements are driven by a pneumatic system (6 - 8 bar); filling parameters, production data and bottle counters are managed via the Siemens SIMATIC HMI touch panel. The line is still installed and under power, and basic functionality can be demonstrated on site. Technical data - Manufacturer: Braumanufaktur Werk II GmbH (Großalmerode, Germany) - Model: Fillmaster R18 - Year of manufacture: 2023 - Machine type: isobaric rinser - filler - crown capper monoblock, glass bottles - Rinsing stations: 6 / filling valves: 6 / capping heads: 6 - Capacity: approx. 500 - 650 bph (semi-automatic, operator-dependent) - Filling system: isobaric, with CO₂ cylinder connection for bottle pre-saturation - Bottle formats: currently set up for 0.375 L glass; adaptable to other crown-cap formats - Crown caps: 26 or 29 mm, all sizes configurable - Control: Siemens SIMATIC HMI touch panel (filling parameters, production data, bottle counter) - Compressed air: 6 - 8 bar - Power: 230 V, 5 A - Dimensions: approx. 870 x 930 x H 1,910 mm Equipment - SM Inox FBTB 750 L PED fermentation and carbonation tank (2021): domed bottom, pressure lid, double insulated jacket with glycol circuit fed by an external heat pump, dedicated control panel for temperature, agitator and CO₂ injection (automatic / manual), carbonation stone fed via solenoid valve; PED Cat. III, approx. Ø 955 mm - SM Inox FCTC 330 L loading tank (2023): pressure lid with CO₂ inlet for pump-free liquid transfer between tanks, approx. Ø 640 mm - Mobile transfer / washing pump on stainless trolley - OEM technical documentation (operating manual, PLC instructions, quick guide) and declarations of conformity Condition Gjdpfxjziuaze Afuebu Used - very good condition with light use: the PLC production counter reads approx. 58,600 bottles / 12,000 litres in total. Still installed and under power; the sale takes place because the owner has discontinued production. Availability Immediately. Location: Italy. Preparation, dismantling and truck loading by the seller (EXW loaded). The machine can be visited and demonstrated on request.

Year of construction: 2021, operating hours: 480 h, condition: like new (used), functionality: fully functional, Electrostatic separator (corona) - EBS-4-271200 - builded to extract the metals from the rejection of the plastic from electric cable process Including additional options: - 3 screw transporters; - 3 m3 input hopper; - mechanisms for changing material flow and stand for big bag for mix collection; - touch screen for control cabinet english / rusian language; - set of spare parts Gbedpfx Aowcp I Aofuju Designed for dry high-efficiency separation of materials, that are differ in their electric properties: - mixtures of plastics and metals, including shredded cables, into metal (copper, aluminium), and non-conducting material (plastic); - mixture of different materials, provided that one of the components has conducting properties (extraction oftextilecord from rubber crumb in the processing of used tires ); - shredded WEEE (including PCB’s) into metal (aluminium, copper, nickel, bronze, and other) and nonconducting materials (plastic, textolite, fiber-glass plastic, and other), and also for: - separations of non-metal raw material (feldspar, pegmatite, quartz sand); - enrichingofdroughconcentratesofores of rare metals (titan-zirconia, tantalum- niobic, tin-tungsten, monazite), ores of precious metals (gold, silver); - benefication of diamond ore. The equipment was purchased at the end of 2021 directly from the prestigious manufacturer PRODECOLOGIA, which also installed it in our factory. The equipment works perfectly and can be tested at any time with PVC plastic, from our Guidetti plant for electric cable recycling. Upon request, we can also provide installation + commissioning at the buyer's location. PRICE : 108 000 EURO- netto

Condition: good (used), functionality: fully functional, A good used 6 station Volumetric cup filler which has been fitted with a variable speed indexing drive and PLC controls - cup volume of 3Litre max in single drop and system capability of multidump set on HMI controls This machine is ideal for filling any free flowing granular product or seeds/pulses - complete on floor stand and supplied with a top sub hopper. Please request more pictures and videos which can be sent on Whats App Ready to ship worldwide Gbsdpezzkr Dsfx Afusu

Year of construction: 2012, condition: good (used), Separator sluice / cell wheel sluice Nestro, year of manufacture 2012, for the separation / differentiation of paper chips or paper edge sections. Technical data: Manufacturer: Nestro Lufttechnik GmbH Year of manufacture: approx. 2012 Motor: 4 kW Volume flow rate max. 28000 m³/h Inlet diameter max.: 450 mm Speed: 22 rpm Rotor width: 1500 mm Rotor diameter: 1200 mm Dimensions: 2200 x 2200 x 2500 mm (L x W x H) Weight: approx. 3000 kg Note: The machine is in good condition. It was inspected and tested by us in 28816 Stuhr. The video can be found at the top of our website or on our YouTube channel. Inspections, including under power, are possible at any time by arrangement. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. Gbsdpozt Ipkjfx Afuju The offers are non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: good (used), Line was filling jars with chutneys and fruit sauces. Lovely condition. Godotux H Iopfx Afujbu

Condition: good (used), functionality: fully functional, Can diameter range: 52 mm – 99 mm Can height range: 50 mm – 140 mm Number of stations: 15 Capacity: up to 200 – 225 cans per minute Gbedpfx Afozpyfvouju

Condition: excellent (used), TETRA PAK TBA/19 200 B ASEPTIC FILLER – 200 ML Industrial aseptic filler TETRA PAK TBA/19 200 B, designed for the automatic forming, filling, and sealing of 200 ml multi-layer Tetra Brik Aseptic cartons. This equipment integrates the operations of sterilizing the packaging material, forming the brick, dispensing the product, and hermetically sealing it within a continuous process under aseptic conditions. Tetra Pak technology enables the packaging of previously sterilized liquid products, such as UHT milk, juices, nectars, and plant-based beverages, promoting their preservation at room temperature without the need for refrigeration before opening, provided that the required sterilization and packaging conditions are met. MAIN FEATURES - Manufacturer: TETRA PAK - Model: TBA/19 - Version: 200 B - Type: Automatic aseptic brick filler - Format: 200 ml Gjdpfxoz Rzcwo Afujbu - Packaging: Tetra Brik Aseptic - Automatic forming, filling, and sealing system - Packaging material feed via reel - Sterilization of the packaging material - Continuous forming of the multi-layer carton - Filling of previously sterilized product - Longitudinal and transverse sealing system - Automatic cutting and forming of packages - Control of aseptic conditions - Automatic transport and discharge - System for controlling operating parameters - Upper platform for access and maintenance - Industrial construction with stainless steel components - Integrable into complete aseptic packaging lines OPERATING PROCESS The multi-layer packaging material is fed from a reel and passes through the machine's sterilization system. Subsequently, the material is formed into a continuous tube by longitudinal sealing. The product, previously sterilized using a compatible UHT system, is introduced inside under aseptic conditions. The machine performs transverse sealing, separation, and forming of the individual 200 ml packages, resulting in hermetically sealed bricks. The finished packages can be automatically transferred to inspection, straw application, coding, grouping, case packing, and palletizing systems. APPLICATIONS Especially suitable for dairy industries, juice manufacturers, plant-based beverage producers, and long-life beverage producers. Compatible products according to configuration: - UHT milk and flavored milk - Dairy smoothies - Fruit juices - Nectars - Plant-based beverages made from soy, oats, or rice - Nutritional beverages - Other liquid beverages compatible with aseptic filling The TETRA PAK TBA/19 200 B allows for the automation of liquid product packaging in individual 200 ml formats, integrating forming, filling, and sealing into a single industrial unit. Machine available for inspection. Additional technical information, production capacity, formats, dimensions, additional photographs, or videos can be provided upon request.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: NVT, type of input current: DC, warranty duration: 24 months, overall weight: 30 kg, filling weight (max.): 30,000 g, input voltage: 220 V, pressure: 2 bar, tank capacity: 30 l, New filling machine that can be used for filling liquids. This includes: Milk Water Gbedpfx Aforivxcsusu Alcohol Disinfectant Etc. A very robust machine that operates on air and 220V, plug and play! Ideally suited for filling small batches. A very small compressor is sufficient to get this machine running. This can also be supplied with the machine. For this, we recommend a minimum 12L version. The filling machine has a 1000ml cylinder, allowing it to fill a maximum of 1000ml per stroke. By having the machine perform multiple strokes, multiples of this amount can also be filled easily. For example, 2500ml can be filled by performing two strokes of 1250ml each. The smallest stroke is 100ml, and any amount between 100 and 1000ml can be filled in a single stroke. We also have models with a cylinder that can fill up to 5000ml per stroke. Equipped with a suction hose, allowing the machine to draw directly from a drum or IBC. The machine is equipped with a foot pedal and an automatic mode. In automatic mode, the machine continuously fills, allowing for easy and quick filling of larger quantities. The foot pedal allows filling at your own pace. Depending on the operator and the amount of milliliters, between 15 and 25 units can be filled per minute. This makes it a very fast machine. The machine weighs approximately 15/20kg and can be easily placed on a table. It is entirely made of stainless steel, making it a very high-quality machine. If you have any questions, please email us, and we will be happy to assist you with this or another machine. We also have a labeling machine that is a very good complement to the filling machine. We strive to respond to you within 24 hours. We are also available by telephone. We are happy to assist you on working days between 08:30 and 17:00.

Condition: used, Year of construction: 1994, Overview This Ortmann + Herbst Hansa B 100/20 is a rotary filler-capper monoblock for glass bottles, originally built in 1994 and completely refurbished in Germany in 2013. It combines 100 filling valves with a 20-head aluminium screw capper in a single machine and reaches up to 30,000 bottles per hour with 750 ml glass bottles. The 2013 refurbishment covered the machine's controls, drive and guarding: a new electrical system with Siemens S7 control and a Siemens SIMATIC MP377 12" touch panel, a new main bearing, and a new safety housing around the machine. Two change part sets are included, for 250 ml and 750 ml bottles. The machine is still installed and under power, so it can be inspected in its production environment. Technical data - Manufacturer: Ortmann + Herbst - Model: Hansa B 100/20 - Year of manufacture: 1994, completely refurbished 2013 Gbsdpfxozu Iaxs Afueu - Machine type: rotary filler with screw capper, glass bottles - Filling valves: 100 - Capping heads: 20, for aluminium screw caps - Pitch: 115 mm - Capacity: up to 30,000 bph with 750 ml glass bottles - Control: Siemens S7 with SIMATIC MP377 12" touch panel (2013) - Change parts: two sets, for 250 ml and 750 ml bottles Equipment - New electrical system with Siemens S7 control and touch panel (2013) - New main bearing (2013) - New safety housing around the machine (2013) - Cap sorter with feed chute for aluminium screw caps - Two change part sets: 250 ml and 750 ml bottles Condition Used - refurbished. Built in 1994 and completely refurbished in 2013, including the electrical system, the main bearing and the safety guarding. Still installed and under power; the machine can be visited and inspected on site. Availability From 2 November 2026. Location: Germany. Preparation, dismantling and truck loading by the seller (EXW loaded). The machine can be visited on request.