Used Coates 7/34180 for sale (33,283)

Year of construction: 2012, condition: excellent (used), functionality: fully functional, Glycol 8.5 meter cooling tunnel Belt width - 375mm Nljdpfx Abox Rzrpe Rjh

Condition: new, Wall-mounted coat rack, aluminum, F1 natural finish, 7 hat/7 coat hooks, length 1000 mm, hook spacing 150 mm. * Coat rack support, aluminum, 55 mm high * F1 natural finish * With rounded end caps * With aluminum hat/coat hooks, Ø 14 mm, hook spacing approx. 150 mm * Further technical specifications: Mounting type: Wall * Additional information: Hook spacing 150 mm * Material: Aluminum * Hook diameter: 14 mm * Height: 55 mm Surface: F1 natural finish Material: Aluminum Nsdpfe Abrlvex Ab Relh Height: 55 mm Length: 1000 mm Hook diameter: 14 mm Number of hooks: 7 hat hooks / 7 coat hooks Additional information: Hook spacing 150 mm Mounting type: Wall Design: Curved end caps

Condition: used, machine/vehicle number: 007649, Max working width: 600 mm Gluing System: EVA Hotmelt Nedpfxeu Eviqo Ab Relh

Condition: used, Powder coating booth with multi-cyclone and after-filter For sale is a professional, complete industrial system for powder coating: A Gema Volstatic powder coating booth, type MRS (multi-cyclone recovery system with after-filter). This system represents the highest Swiss quality, extreme robustness, and maximum efficiency in powder recovery. Thanks to its generous dimensions, it offers plenty of space for long and bulky workpieces. It is ideal for industrial companies, powder coaters, or workshops looking for a powerful and reliable system. Technical data • Manufacturer: Gema Volstatic • Type: MRS (multi-cyclone and after-filter system) • Electrical connection: 3 x 380 V / 50 Hz Nodjz Nyqwjpfx Ab Rslh • Equipment: Booth substructure with inlet, manual coating opening, and spray gun travel slots. • Recovery: Highly efficient multi-cyclone with cleaning flap and powder collection container. • Extraction / After-filter: Powerful fan unit with integrated pressure monitoring and automatic flushing air filter cleaning. • Fan power after-filter: 15 kW with 12 filter plates (air volume flow: 8000 m³/h) 22 kW with 16 filter plates (air volume flow: 12000 m³/h) • Fan differential pressure: 4.2 kPa (at 8000 m³/h) or 4.5 kPa (at 12000 m³/h) • Compressed air connection: Min. 6 bar / Max. 10 bar (Recommended: 7 bar) • Compressed air consumption (flushing air filter box): Max. 18 Nm³/h • External dimensions: approx. Height 3.20 m × Length 8.50 m × Width 1.84 m • Internal dimensions (usable space): approx. Height 2.40 m × Width 1.84 m Item location: • 48683 Ahaus / Ottenstein (Münsterland, North Rhine-Westphalia) Important pick-up & dismantling options (Please note): Option 1: Dismantling by the buyer The system must be professionally dismantled and transported by the buyer. Option 2: Our "all-inclusive package" (dismantling by us) Alternatively, we will take over the complete, professional dismantling of the system for you. Fixed price for this: 7,500,- € net (plus VAT). "Everything from one source: We would be happy to offer you a suitable bank financing option for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Powder coating booth with filter cart & fluidized bed For sale is a professional, industrial powder coating system from the traditional manufacturer Gema Volstatic. This is the proven MRS system (Multi-recovery System), which ensures highly efficient powder recovery (overspray extraction) and clean working conditions in the workshop. The system is extremely robust and, thanks to the generous manual coating opening, is ideal for manual operation (hand coating). Technical data & connection values: • Manufacturer: Gema Volstatic AG • System / Type: MRS booth with filter cart and fluidized bed • Electrical connection: Voltage 3 x 380 V / 50 Hz (standard three-phase) • Compressed air connection (input pressure): min. 6 bar / max. 10 bar (recommended pressure: 7 bar) • Compressed air quality: Water vapor content max. 1.3 g/m³, oil content max. 0.1 ppm Nsdpfsz N Aivex Ab Rslh • Compressed air consumption (filter plate cleaning): max. 18 Nm³/h • Fan output of the cleaning unit: • For organic powders: Depending on the number of filter plates, from 7.5 kW to 15 kW (volume flow up to 12,000 m³/h) • For powder coating: From 5.5 kW to 11 kW (volume flow up to 8,800 m³/h) • Fan differential pressure: 4.2 kPa (at 8000 m³/h) to 4.5 kPa (at 12000 m³/h) Dimensions & space requirements: • External dimensions of the booth: approx. Length 6.30 m × Width 2.52 m × Height 3.20 m • Internal dimensions of the booth (working area): approx. Length 6.00 m × Width 1.73 m • Dimensions of the platform: approx. Length 7.64 m × Width 2.45 m × Height 1.16 m Equipment & components: • Booth housing: Solid construction including booth inlet and booth substructure • Filter cart with fluidized bed: Excess powder is extracted downwards. The fluidized bed converts the powder into a liquid-like state using compressed air, so that it can be reprocessed and reused in the cycle (enormous material savings!). • Cleaning unit: Unit mounted on top including solenoid valve cover and sealing frame • Safety & control: Integrated pressure monitoring and pneumatic monitoring via the side control unit • Ergonomics: Hand lever valve for easy control directly on the booth, large manual coating opening for the operator, and gun travel slots on the back • CO₂ fire extinguishing system (fire protection system) Item location: 48683 Ahaus / Ottenstein (Münsterland, NRW) Important pick-up & dismantling options (Please note): Option 1: Dismantling by the buyer The system must be professionally dismantled and transported away by the buyer. Option 2: Our "all-inclusive package" (dismantling by us) Alternatively, we will take over the complete, professional dismantling of the system for you. Fixed price for this: €7,500.00 net (plus VAT). "We offer you a suitable bank financing option for your project." You can find more items - new and used - in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: M .415619, total length: 5,600 mm, total width: 1,300 mm, total height: 1,950 mm, overall weight: 1,500 kg, GPE/100-7″-UV Automatic machine for printing with registration on travel mugs This machine is in excellent condition Also comes with a set of jigs to print the travel mug with an handle Njdpfxj Aazuqs Ab Relh with the UV dryer Print cure instantly

Condition: used, Year of construction: 2017, x-travel 2.600 mm y-travel 700 mm z-travel 700 mm control Celos 840 D SL Operate Siemens turning speed range - main spindle 20 - 20.000 min/-1 power capacity - main spindel 35 / 25 kW Torque 130 / 86 Nm tool taper HSK-A63 Nlodpfe Afpziox Ab Roh b - axis +-100 ° table surface area 2.900 x 700 mm max. table load 2.150 kg number of toolpositions 120 pos. tool taper HSK-A63 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 40 m/min feed speeds max. 40.000 mm/min feed power max. 8 kN total power requirement 67 kVA weight of the machine ca. 16,24 t dimensions of the machine ca. 8,0 x 5,6 x 2,9 m CNC - Travel Column Milling Machine DMG MORI - DMF 260 - 7 - NC tilting milling head (B-axis ±100°) - Balluff BIS C tool identification system -> One read/write head each at the tool loading/unloading station -> Evaluation unit -> CNC software -> Balluff chips NOT included! - incl. workspace partition - MPC (Machine Protection Control) - ATC (Application Tuning Cycle) - Dual changeover filter (25 µm) - Bed flushing / door flushing system (includes additional pump) - 2D surface feature (as an add-on to ATC) - EES (Extended Editing System) option - Provision for refilling the internal coolant supply (ICS) system - Provision for vacuum clamping - Clamping devices and machine vises NOT included!

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 2,134 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, total length: 5,500 mm, total width: 2,700 mm, table width: 711 mm, table length: 2,134 mm, overall weight: 11,650 kg, spindle speed (max.): 8,100 rpm, number of slots in tool magazine: 31, Equipment: chip conveyor, documentation/manual, CNC Milling Machine HAAS VF-7/40 TECHNICAL DATA: Nledpfx Abs Adzgze Reh - Date of manufacture September 2014 - X 2 134 mm - Y 813 mm - Z 762 mm - Control HAAS - Spindle speed max. 8 100 rpm - Table size 2 134 x 711 mm - Spindle nose to table 102 – 864 mm - Tool magazine 31 positions (SK40) - Spindle power 22.4 kW - Chip conveyor - Machine dimensions 5.5 x 2.7 x 3.3 m - Weight approx. 11 650 kg Machine in very good technical condition, connected to power – it can be inspected and tested on site by prior appointment. Professional loading is included in the price. Accessories, tooling and clamping devices shown in the photos are part of the offer only if listed under equipment. Technical data is for reference only and may contain inaccuracies. Subject to prior sale.

Condition: new, Core drill bit set, 7-piece, D.12-22mm, HSS-TiAlN, cutting depth 30mm, Weldon shank, RUKO · HSS · TiAlN-coated · with Weldon shank 19.05 mm (3/4") · CBN-ground · Contents: 6 core drill bits with Weldon shank (3/4") Ø 12, 14, 16, 18, 20, 22 mm, 1 guide pin Ø 6.35 x 77 mm for a cutting depth of 30 mm · Additional technical features: Contents: 7 pieces · Shank design: Weldon Nledpfxo Aby Nis Ab Rjh · Cutting depth: 30mm Cutting material: HSS-TiAlN ø mm: 44896

Condition: like new (used), Year of construction: 2014, load capacity: 7 kg, arm reach: 800 mm, ROBOT ARM MANUFACTURER: KUKA MACHINE TYPE: LBR iiwa 7 R800 MODEL YEAR: 2014 TECHNICAL SPECIFICATIONS PAYLOAD CAPACITY: 7 KG MAXIMUM LENGTH: 800 MM Nlodps Ad Na Ajfx Ab Roh CONTROL UNIT: KRC4 SUNRISE

Year of construction: 2023, operating hours: 300 h, condition: excellent (used), functionality: fully functional, This robotic cell is used for tending an injection molding machine for insert molding. Nodsz N Iq Espfx Ab Rjlh

Condition: used, Year of construction: 2000, functionality: fully functional, overall weight: 12,000 kg, Equipment: documentation/manual, FOUR IPSEN TQ 2/7 - Completely refurbished in 2010 - Usable dimensions: 910*610 H=500 - Gas-fired heating with radiant tubes - Control (load and atmosphere) via PROTHERM 500 system PRICE (incredible!): €32,000 EXW (excluding VAT) ENDOTHERMIC GENERATOR IPSEN 2018 (new retort in 2023) - Gas-fired heating - Reaction gas = natural gas Nljdpjz Iayuofx Ab Rjh PRICE: €32,000 EXW (excluding VAT) Equipment to be dismantled by the buyer (We can provide a quote for dismantling and loading onto a truck) Equipment available immediately Inspection possible (Saint Etienne 42)

Condition: used, CTS Type: CTS CW+40/7/7 Walk-in climate chamber CTS walk-in climate chamber, 7 m³ Temperature and humidity testing, 40–90°C Description: For sale is a CTS CW+40/7/7 walk-in climate and temperature test chamber in an industrial design. The system is used to simulate defined temperature and climate conditions for testing materials, components, and technical systems under realistic environmental conditions. Temperature and humidity can be precisely controlled, and constant or programmed test cycles can be run. Due to the high air circulation, uniform climate distribution is achieved throughout the test chamber. The walk-in design allows testing of large components or complete systems. Technical data: Manufacturer: CTS – Clima Temperatur Systeme Type: CW+40/7/7 Serial number: 113011 Year of manufacture: Design: Walk-in climate test chamber Test volume: 2 × 7 m³ Electrical data: Power connection: 400 V / 3N / 50 Hz Rated power: 29.6 kW Rated current: 45.8 A Climate data: Temperature range: +40 °C to +90 °C Humidity range: 10 % to 90 % relative humidity Dew point range: +30 °C to +87 °C Protection class: IP44 Internal dimensions: Width: 1400 mm, Depth: 1300 mm, Height: 2250 mm External dimensions of the complete system: Width: 3511 mm, Depth: 2765 mm, Height: approx. 2515 mm (total) Further technical data: Sound pressure level: 56 dB(A) Cooling: Water-cooled Heating: Stainless steel heating element Interior: Stainless steel Exterior: Coated steel sheet (RAL 9010) Air circulation: Radial fan Control: 32-bit controller with LCD Interfaces: RS-232 / RS-485 Program and cycle operation possible Safety temperature limiter & emergency stop available Refrigerant: R404A Nlodpfx Aeylmamjb Rsh Weight: approx. 2000 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, functionality: fully functional, inner dimension length: 3,000 mm, Powder coating line for sale – 3 m gas-fired oven I am offering for sale a powder coating line complete with equipment for surface preparation, drying, and powder coating of parts. The set includes: a 3 m long gas-fired oven, an open powder coating booth, a suspended conveyor system, Nledpfoz Uxtzox Ab Rsh 3 tanks for surface preparation, a tank-type dryer, a hoist above the tanks, a DEMI station for water demineralization. The powder coating line is located in Slovakia, where it can be inspected after prior arrangement. We offer assistance with relocating the equipment to a new location. Interested parties are invited to contact me via private message or by phone. 3 m gas-fired oven, open powder coating booth, suspended conveyor, 3 tanks for surface preparation, tank-type dryer, hoist above the tanks, and DEMI station.

Condition: excellent (used), Year of construction: 2022, operating hours: 10 h, ABB IRB 1300-7 /1.4 + Omnicore C90XT + TPU DEMO ROBOT DEVELOPED BY GSG ROBOTICS Nljdpsz Tacuefx Ab Rsh GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015 and offers a comprehensive service area for robot maintenance and repair. Over the years, we have evolved into a holistic partner for all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: used, machine/vehicle number: 006042, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Nlodpfs Aax Rvjx Ab Rsh Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: used, Offered is a facing lathe with a large faceplate. Swing diameter over foundation plates: 2480mm. Center height above foundation plates: 1250mm. Faceplate diameter: 1600mm. Maximum faceplate torque: 14000Nm. Main spindle bore: 100mm. Front main spindle bearing diameter: 240mm. Turning tool shank cross-section: 50 × 50mm. Equipped with four chuck jaws, movable bed-mounted carriage, cross slide, tool holder, mechanical control levers and handwheels. Nlodpfx Abe Afplhe Rsh

Condition: used, Year of construction: 1978, Equipment: documentation/manual, emergency stop, foot remote control, I am offering an electro-hydraulic profile bending machine, purchased in 2012, manufactured by Roundo AB, Sweden, type: R-7S (used, workshop-inspected, and partially refurbished with standard configuration, including vertically arranged bending axes, for sale. It is fully operational and can be demonstrated under power after prior consultation. - Control panel on the swivel arm with joysticks and switches - Digital displays for the two side rollers Significant added value: Extensive tool and profile package included! To be able to handle customer orders in an even more flexible and individual manner, significant investments have been made in expanding the range of tools. In addition to the standard tools, you will receive: • 36 additional rollers for a wide variety of profiles. • Special tool for flat and light-duty profiles up to a height of 500 mm. • Tools for square and rectangular tubes. Nsdpfx Abez Nhlij Rslh • Tools for various round tubes Ø (88.9 + 114.3 + 139.7 + 168.3) mm. This machine is designed according to the latest findings in the tube and profile processing industry (as of 2012). The fixed bending roller is equipped with an adjustable slip clutch, which automatically adjusts the speed of the bending roller to the workpiece being bent. The three bending axes are mounted on oscillating roller bearings. A set of complete universal bending rollers for bending angle and T-sections with flange facing inwards and outwards, flat sections upright and lying flat, and square material. The rollers are made of wear-resistant and hardened steel. They consist of three adjustable rings, allowing various profiles to be rolled. Two independently adjustable guide rollers, which can be adjusted fully hydraulically on three different axes. The guide roller unit is equipped with small, interchangeable rollers. This allows asymmetric profiles to be held flat. This is especially necessary for angle sections with the flange facing inwards. Maximum pressure valve to prevent machine overload. Thermal overload protection for both electric motors. Main switch, emergency stop switch, 24 V transformer, equipment according to UVV standards. Multi-button switch mounted on the swivel arm for operating the machine. A set of keys and tools including operating manual in German. In practice, it has been shown that the quality of bending angle steel with the existing standard roller sets leads to limited results. Extensive investment! In recent years, important core components of the hydraulic system have been professionally renewed. The execution of the work is fully documented with existing invoices: • 2021: All hydraulic hoses were completely replaced. • 2022: As part of an oil leak repair, a brand new Bauer hydraulic motor was installed. The total cost for the motor including professional installation amounted to approximately €21,000 net. • Proof is available for the hydraulic motor: Test Certificate for Hydraulic Motors, Certificate of Conformity, Manufacture Certificate, and invoices. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The dismantling, loading and collection must be organized and carried out by the buyer himself or by a freight forwarder commissioned by him. • Technical specifications according to existing documents. Subject to prior sale.

Condition: used, Year of construction: 2013, HOMAG edge banding line with infeed and outfeed. The machine consists of the following components: Machine configuration: HOMAG edge banding line with infeed and outfeed Infeed table: HOMAG PROFI TBL100/20/25/F FlexLine Edge banding machine: HOMAG PROFI KAL330/7/A3/WZ Panel outfeed: HOMAG ZHR 30/L/125/F TECHNICAL DETAILS Panel length min.: 240 mm Panel length max.: 3,000 mm Panel width min.: 120 mm Panel width max.: 1,200 mm Panel thickness min.: 12 mm Panel thickness max.: 60 mm Edge thickness min.: 0.3 mm Edge thickness max.: 3 mm Gluing system: EVA hot melt Number of processing units: 9 pcs. Number of units in the joining section: 1 pc. Number of units in the edge processing section: 7 pcs. Feed speed max.: 25 m/min Trimming unit Manufacturer / Model: S2 Motor power: 3 kW Speed: 9,000 rpm Automatic cycle adjustment: Yes End trimming unit Manufacturer / Model: HL 84 Number of motors: 2 pcs. Motor power: 0.4 kW Speed: 12,000 rpm Working speed max.: 25 m/min Flush trimming unit, top and bottom Manufacturer / Model: BF10 Number of motors: 2 pcs. Motor power: 0.55 kW Speed: 12,000 rpm Corner rounding unit Manufacturer / Model: FK 11 Number of motors: 2 pcs. Working speed max.: 25 m/min Nodpez En Axefx Ab Relh Profiling unit Number of motors: 1 pc. CNC positioning: Yes Automatic cycle adjustment: Yes Edge pulling unit Manufacturer / Model: PN20 Glue application unit Manufacturer / Model: FA 11 Scraping unit Manufacturer / Model: FA 11 Number of motors: 2 pcs. Feed speed, infeed max.: 40 m/min Feed speed, outfeed max.: 25 m/min EQUIPMENT FlexLine infeed table Pressure bar with rubber belt Panel stop Overpressure Edge heating lamps Edge magazine with 24 positions Hot melt glue tank Hot melt pre-melter Edge pressing roller unit with 3 pressure rollers CNC positioning of the pressure rollers Spraying device PowerTouch PC23 machine programming software Panel outfeed via transfer roller conveyor Panel transport via motorized conveyor belt Clamping feed system Panel outfeed system, left CE conformity The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External Reference: 7694

Condition: used, Year of construction: 2011, You are bidding on: a branded folding press from a very reputable and well-known manufacturer – Geka. Device features: - Folding press - Rail bends cleanly – test possible - Degree indicator - Bending length: slightly over 2 m - Sheet thickness: 2 mm (iron sheet; greater possible for aluminum, zinc, etc.) - Machine bends pneumatically via foot pedal - 15 cm front rail removable, leaving a 1 cm rail (desired by many; together 2.5 cm) Guillotine shear HT 200 or Schröder electric guillotine shear, 2 m – 2.5 mm ... manual lever shears also optionally available. Important: Optionally, you can find and purchase a wide range of machinery and machine accessories (e.g., different rails, depth stops) for sheet metal and steel processing in our shop. This includes folding presses, guillotine shears, drill presses, slip rollers, slitting and profiling machines, and corresponding accessories (beading devices, round rollers for gutter production, back gauge, etc.), as well as additional hand tools and spare parts from many top manufacturers. Feel free to contact me with any questions. You will receive an invoice with VAT shown separately. Free loading is available – weight approx. 850 kg. Nlodpfx Absyk H E Te Rjh Inspection and testing are possible and encouraged by prior telephone appointment. Payment in cash upon collection. Benefit from our experience and expertise—we will be happy to advise you. Collection by the buyer (or a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways.

Condition: used, Year of construction: 2008, Technical details: Nodpez Ig Sqofx Ab Rjlh max. turning diameter: 350 mm turning length: 1040 mm control: OSP E 100 L Fanuc greates pass round over bed: 550 mm Max. distance between centres: 1200 mm max. workpiecediameter: 550 mm Traverse X-Axis 1: 270 Traverse X-Axis 2: 230 mm Traverse Y-Axis 1: 120 (±60) mm Traverse Z-Axis 1: 930 mm Traverse Z-Axis 2: 920 mm Spindle 1 Power: 22 / 15 kW Spindle 1 RPM: 5000 1/min spindle nose: JIS A2-8 bar material dia.: 65 mm C-Axis: 0,001° Number of Turrets: 2 Turret No.1 stations / rotary tools: 12/12 VDI 40 Turret 1 tool RPM: 4500 1/min Turret 1 power rotary tools: 7.0 / 3,3 kW Turret No.2 stations / rotary tools: 12/12 VDI 40 Turret 2 tool RPM: 4500 1/min Turret 2 power rotary tools: 7.0 / 3,3 kW rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 26 m/min rapid traverse Z-axis: 40 m/min total power requirement: 33 kVA weight of the machine ca.: 10 t dimensions of the machine ca.: 7,0 x 2,3 x 2,3 m Accerories Chip conveyor part counter total counter tool setting Signal lamp 3 colors spindle load monitor B Spindle 1 Chuck 300 mm CNC Turning-and Milling Center The Okuma LT 300 MY has 2 turrets, the upper turret has Y-axis with milling function, the lower turret has milling function. It has main- and subspindle. This allows synchronized machining using 2 turrets. There is an Interlit paperfilter/high pressuire system with the machine with coolant cooler. There are 7 identical machines available, all in very good and well maintained condition. *

Condition: used, functionality: fully functional, Year of construction: 2012, LVD PPEC-7 135/30 Press Brake For sale: professional hydraulic CNC press brake LVD PPEC-7 135/30. This is a high-class, Belgian-made press brake, known for its precision, reliability, and servo-hydraulic control system. The machine is in full working condition and has undergone a complete technical service – oils and filters have been replaced. Inspection and testing are possible at our warehouse in Vilnius, Lithuania. Key information: Manufacturer: LVD Model: PPEC-7 135/30 Year of manufacture: 2012.10 Bending force: 135 T (1350 kN) Working length: 3050 mm Technical specifications: Distance between uprights: 2600 mm Stroke: 200 mm Table to frame distance: 500 mm Throat depth: 400 mm Approach speed: 100 mm/s Working speed: 11 mm/s Return speed: 100 mm/s Njdpfsyxp Eyex Ab Rolh Motor power: 11 kW Oil capacity: 275 L Weight: ~10,000 kg Equipment and configuration: Controller: Cadman Lite (2D graphic programming, Quick Bend, collision control) Table: Equipped with automatic deflection compensation system (Crowning – V-axis) Upper tool clamping: Wila hydraulic system Backgauge: X, X’, R, Z1, Z2 Backgauge fingers: 2 pcs. (3 measuring positions, up to 1000 mm measurement) Laser safety: CE – Lasersafe 2 front supports: PP1115 Machine is sold without bending tools Constructional advantages: • One-piece welded frame • Servo-hydraulic system with Y1–Y2 encoders (0.01 mm accuracy) • Precise and stable bending geometry • Suitable for both serial and precision production If you have any further questions, please do not hesitate to contact us.

Condition: used, mileage: 580 km, power: 66 kW (89.73 HP), first registration: 05/1962, fuel type: diesel, number of seats: 22, gearing type: mechanical, color: beige, Year of construction: 1962, Available in multiple colors (yellow/red/green), manufactured between 1957 and 1964. We also have 5 vehicles ready for restoration, which we can start working on immediately. Features: 8 or 20 sleeping berths * Double reclining seat * Large lounge area with 8 seats Njdpfx Abs Adymgo Relh Length: 6650 mm Width: 2250 mm Permissible total weight: 6200 kg Complete restoration Henschel engine Manual transmission Roof rack German H-registration for historic motor coaches - Rental possible for your event. - Delivery throughout Europe possible with our car transporters. We have a larger selection of vintage buses: Setra S 6, S 7, S 9 to S 14, Mercedes O 319 and O 3500, Saurer bonnet buses. We offer worldwide shipping. Price (net): 165,000.00 Euro

Condition: used, machine/vehicle number: 007694, Position 1: Panel Feeding and Loading HOMAG-PROFI KAL330/7/A3/WZ Njdpfxs Adz I Se Ab Rolh Position 2: Single Edgebanders HOMAG-PROFI KAL330/7/A3/WZ Position 3: Panel Return Systems HOMAG-PROFI KAL330/7/A3/WZ

Year of construction: 2022, condition: good (used), PLP MT100 Paddle coating machine Nledpjz I Dtfsfx Ab Rjh 2022, Stainless, The coating system MT is a complete machine able to mix in line pellets, kibbles, and other granulated products with additives such as liquid enzymes, fat, digest, aromas, oil, medicines, vitamins, complete with two shafts and adjustable paddles to mix and hold the product, capacity up to 50T per hour, with twin 5.5Kw motors, with heating, comes with 1500Kg buffer holding tank, infeed conveyor, paddle coater and outfeed conveyor