Used Comi-Condor Hx/Gmp for sale (423)

Condition: good (used), Used Comi Cóndor HX / GMP 316L stainless steel Atex-rated horizontal centrifugal peeler. The unit features a perforated basket with a diameter of 1150mm. Maximum load 280kg, maximum cake capacity 222 litres. Internal design pressure rated at +0.5/-0.5 bar at 50°C. The unit is equipped with main drive, hydraulic powerpack, mounting springs and two control cabinets. Material: Stainless steel 316/316L Technical features Model: HX/GMP Maximum load (density 1.25 kg/dm³): 280 kg Condition: As is Bedpfx Aoynb Nuofwsll Manufactured by: COMI-CONDOR

Condition: like new (used), Year of construction: 2020, functionality: fully functional, GMP Roller Laminator EXCELAM-II 355 Q Working width 355 mm, hot lamination Blsdpfx Aszwwqljfwsl Laminator for hot lamination films from 32 - 175 microns Infrared-heated silicone rollers, ensuring scratch-free lamination Equipped with an 8-bit microprocessor LCD display and electronic reverse function, standby function Temperature adjustable from 0-160 °C in 1°C increments Temperature and speed settings are pre-programmed for each film thickness The roller pressure can be precisely adjusted for each film thickness using a scale disc Max. passage height: 5 mm Adapter for 25 mm core diameter Working speed: 0-1.6 m/min, adjustable in 9 steps Connection: 220 V / 50 Hz / 1300 Watts Dimensions: W546 x D456 x H285 mm Weight: 25 kg

Condition: ready for operation (used), Year of construction: 2018, Medium: demineralized feed water (Aqua Purificata), max. vessel operating pressure: 5bar, max. temperature: 200°C, vessel volume: 300l, test pressure: 8.68bar, steam output: 300kg/h. The steam generator was designed as part of an overall system, however it has its own control and automation and can be used in separate operation. Documentation available. An on-site inspection is possible. Bodpfjygmb Tsx Afwsll

Condition: ready for operation (used), Year of construction: 2018, Inlet medium: AP water, outlet medium: distillate, distillate outlet temperature: approx. 99°C, tank volume: 900l, number of preheaters/evaporator columns: 3/4, distillate production: 300l/h, pure steam production: approx. 70kg/h, operating modes: distillate production/pure steam production/WFI loop system sterilization, controls: Siemens SPS S7-300. The distillation unit was designed as part of an overall system but has its own control and automation and can be operated separately. Documentation available. An on-site inspection is possible. Blsdpfxoygmcdo Afwel

Condition: ready for operation (used), Year of construction: 2018, An insulated process vessel is available. Temperature min./max.: -10°C/143°C, volume: 2491L, operating pressure range: -1bar/3bar, test pressure: 5.6bar. An on-site inspection is possible. Blodpfx Asygmckofwsl

Condition: excellent (used), Now in stock at Glendale we have this GMP QTopic 380 Laminator with Foiling/Sleeking rewinder. Having been within a small digital implant, this laminator has had little use. The laminator is in perfect working order and includes the air compressor and foiling unit. Bljdpswi T Tvsfx Afwjl Raising ordinary print work to 'extra-ordinary'.GMP QTopic 380 has been developed to meet specific print finishing requirements and built to exacting technical standards – with fully controllable pressure and heat processes, devised to deliver optimum results with today's digital print output. The GMP QTopic 380 offers pneumatic pressure which is required to get a great finishing when laminating and/or foiling is required. The pneumatic pressure is supplied by the integrated silent air compressor housed in the Qtopic 380 stand. This semi-automatic system is hand feed with automatic sheet separation. Capable of working at speeds up to 10 metres per minute the QTopic 380 can laminator over 1300 SRA3 per hour. Turnaround times and waste are further minimised with the unique 'burst separation' system. The laminating film is micro-perforated on the edge by the robust marking device and then separated by the pneumatic burst roller. This easily separates the laminated sheets prior to the actual edge of the media, leaving clean and square datum edges from which to measure, cut, fold or guillotine. Faultless lamination. Class-leading lamination for the commercial and digital printer. Using state-of-the-art technology, combined with integrated pneumatic pressure, the QTopic 380 delivers superior bonding and faster production times – compared to standard systems. In addition, the fully adjustable heat and pressure combinations enable a wider range of laminates to be used with litho or digital printed media. Stunning foiling. For today's printers who demand stunning results with that extra ‘wow’ factor – the GMP QTopic 380 delivers more than just class-leading lamination. Metallic, coloured, patterned or holographic style foils can be added to digitally printed materials in either spot or flood treatments. This decorative effect traditionally would involve costly custom die production to create these effects. However, the QTopic can deliver instant and affordable results - and with upgraded pneumatic pressure, an even wider choice of media is now suitable for great results! Specifications Manufacturer GMP Model QTopic 380 Year 2021 Condition Refurbished Stock Number 114941 Laminating speed 1.5m to 10m/min Paper weight 110-400gsm Warm up time 5 minutes Laminating temperature up to 150° Temperature control Touch screen Speed control Touch screen Roller pressure Pneumatic Film core (mm / inches) 77mm 3" Electrical requirements 220/240v 50/60Hz Machine weight 187kg Dimensions L2010mm x W710mm x H1475 - all when in use

Condition: used, Year of construction: 2014, COMI 1092 Door liner thermoforming machine, Thermoformer HEDL 2000x800x200, Year of Manufacture 2014, Serial Number C1092 Machine Specifications (List View) Forming & Mould Dimensions Maximum inside frame dimensions: 2004 × 804 mm Maximum moulded part height: 150 mm (male mould) / 50 mm (female mould) Maximum mould base dimensions: 2000 × 800 mm Minimum mould base dimensions: 600 × 500 mm Coil width range (min/max): 580 to 900 mm Mechanical Characteristics Lower die holder force: 40,000 kg Machine weight: 20,000 kg (20 tonnes) Machine dimensions: See Drawing LO-029-14-01 Heating System Upper heating power: 168 kW Thermoregulator power: 24.99 kW (3 × 8.33 kW) Motors & Drives Forming motor power: 12 kW Vacuum pump motor power: 7.8 kW De-reel device motor power: 0.37 kW Sheet conveyor motor power: 8.17 kW Transport regulation motor power: 1.1 kW Fan motor power: 3.0 kW (4 × 0.75 kW) Transfer unloading motor power: 3.0 kW (2 × 1.5 kW) Scrap cutting motor power: 2.2 kW Moulded-part unloading belts motor power: 0.5 kW Cooling & Auxiliary Equipment Chiller power: 28.75 kW Auxiliary equipment maximum power: 4.12 kW Electrical Requirements Maximum installed power: 264 kW Typical operating power (50% load): 132 kW Pneumatic Requirements Pneumatic operating pressure: 6 bar Air consumption: 2,000 N litres/cycle Water Requirements Water temperature: 25 °C Water pressure: 2 to 3 bar . Fully automatic thermoforming machine designed to shape plastic sheets up to 2000 × 800 mm with a maximum forming depth of 150 mm (200 mm), suitable for high-capacity industrial applications. Thermoformer details: Forming area 2000 × 800 mm Bljdpfx Afszumwcswjl Max forming depth 150 (200) mm Heating station – ONLY Upper heater, heater length fully configurable, fulfils pre-heating and heating functions. Pressure and vacuum forming operation. Trimming press. Scrap collection end station. Industrial-grade construction with multiple access doors, observation windows, and integrated ventilation heat management.

Condition: used, Year of construction: 1993, COMI/RIGO 0599 inner liner thermoforming machine, SL200x90 NG DX Machine Specifications Forming & Tool Dimensions Maximum mold base dimensions: 2000 × 900 mm Minimum mold base dimensions: 800 × 480 mm Maximum frame interior dimensions: 2000 × 900 mm Maximum mold height: 800 mm Maximum molded part height: 550 mm Maximum sheet stack height: 1000 mm Maximum sheet support stack height: 180 mm Heating System Upper heating power: 89 kW Lower heating power: 78 kW Upper preheating power: 52 kW Blodpfx Ajzumuuofwjl Lower preheating power: 46.8 kW Motors & Drives Oil pump motor power: 30 kW Vacuum pump motor power: 12 kW (3 × 4 kW) Sheet transport motor power: 1.6 kW Transport regulation motor power: 1.1 kW Sheet moving motor power: 0.25 kW Fan motor power: 0.50 kW (2 × 0.25 kW) Pyrometer motor power: 0.18 kW Discharge transfer motor power: 0.70 kW Single-blade motor power: 5 kW Cooling & Utilities Chiller power: 78 kW Auxiliary equipment maximum consumption: 3.87 kW Electrical Requirements Maximum installed power: 399 kW Vacuum System Vacuum pump capacity: 570 m³/h (3 × 190 m³/h) Vacuum tank capacity: 4,000 L (2,000 + 2,000 L) Water Requirements Water inlet temperature: 12-20 °C Water inlet pressure: 2-3 bar Closed-circuit water maximum flow rate: 130 L/min Pneumatic & Hydraulic Requirements Pneumatic operating pressure: 6 kg/cm² Hydraulic operating pressure (min/max): 110 / 140 kg/cm² Mechanical Characteristics Upper die clamping force: 9,000 kg Lower die clamping force: 9,000 kg Oil quantity for operation: 480 L Air consumption (movement = 700, cooling = 800): 1,500 N litres/cycle Machine weight: 25,000 kg (25 tonnes)

Condition: used, Year of construction: 2007, used to produce innerliners Equipment Specifications Summary Forming and Tool Dimensions Maximum frame inner size: 2005 × 905 mm Maximum tool base size: 2000 × 900 mm Minimum tool base size: 700 × 500 mm Maximum sheet size: 2090 × 960 mm Minimum sheet size: 790 × 560 mm Maximum tool height: 800 mm (550 + 250 mm) Maximum formed workpiece height: 550 mm Maximum sheet stack height: 1000 mm Maximum pallet height: 180 mm Heating System Upper heating power: 83.3 kW Lower heating power: 71.3 kW Upper preheating power: 52 kW Lower preheating power: 46.8 kW Drive Motors & Auxiliary Equipment Oil pump motor power: 19 kW Vacuum pump motor power: 23.4 kW Sheet centering motors power: 0.24 kW Sheet feed motor power: 2.2 kW Sheet feed width-adjustment motor power: 2.2 kW Sheet picker motor power: 0.37 kW Fan motor power: 5.5 kW Shear motor power: 2.2 kW Carriage motor power: 2.2 kW Rotary table motor power: 1.1 kW Scrap cutter motor power: 3.0 kW Scrap conveyor motor power: 0.37 kW Finished workpiece discharge belt motor power: 0.75 kW Cross-cutting motor power: 0.25 kW Cross-cut scrap conveyor motor power: 0.22 kW Transfer unit motor power: 1.5 kW Auxiliary units maximum consumption: 5.1 kW Tempering unit power: 52 kW Electrical Requirements Maximum installed power: 375 kW Power consumption at 70% load: 262.5 kW Vacuum System Vacuum pumps capacity: 750 m³/h (250 × 3) Tool vacuum tank capacity: 2,000 L Bell vacuum tank capacity: 2,000 L Hydraulic System Required oil quantity: 600 L Hydraulic operating pressure: 10 MPa Bedpfx Ajzumt Dofwoll Maximum hydraulic operating pressure: 18 MPa Pneumatic System Required air pressure: 600 kPa Compressed air consumption: 1,300 N liters/cycle Cooling Water Requirements Incoming water pressure: 200-300 kPa Incoming water temperature: 12-20 °C Outgoing water temperature: 30-35 °C Mechanical Characteristics Lower tool holder force: 9,000 kg Machine weight: 35,000 kg (35 tonnes) Key Utility Requirements Electrical Supply: 375 kW installed load Compressed Air: 600 kPa, 1,300 N liters/cycle Cooling Water: 200-300 kPa at 12-20 °C Hydraulic Oil Capacity: 600 liters Vacuum Capacity: 750 m³/h with two 2,000-liter vacuum tanks Fully automatic thermoforming machine designed to shape plastic sheets suitable for high-capacity industrial applications. Thermoformer details: Forming area 2005mm x 905mm Max forming depth 550mm 3x loading stations. 1 x heating station. (pre-heating, final heating, upper and lower elements) - ceramic/quartz infrared elements Pressure and vacuum forming operation. 4 x side trimming presses. (rotary) Guillotine. Scrap collection end station. Automation: Fully automatic batch processing with operator control panel featuring manual/automatic modes. Industrial grade build with multiple access doors, observation windows, and integrated ventilation heat management. Year of manufacture 2007.

Condition: used, Year of construction: 2013, Used for the production of inner liners, vacuum forming machine BL 2200x900x600-NG-EL-PF-DX, year of manufacture 2013, serial number C1091, voltage 380V-N-50Hz+PE. Machine Specifications Summary Forming & Sheet Dimensions Maximum inside frame dimensions: 2205 × 905 mm Mould base maximum size: 2200 × 900 mm Mould base minimum size: 700 × 500 mm Maximum sheet size: 2290 × 960 mm Minimum sheet size: 790 × 560 mm Maximum mould height: 850 mm (600 + 250 mm) Maximum formed part height: 600 mm Maximum sheet stack height: 1000 mm Sheet support stack height: 144 mm Electrical Power Requirements Upper heating power: 93.8 kW Lower heating power: 80.3 kW Forming motors: 23.2 kW Sheet conveyor motor: 4.6 kW Blsdjzumrmjpfx Afwel Transport support regulation motors: 0.6 kW Sheet centering device motors: 0.36 kW Sheet pick-up motors: 3.0 kW Cooling fan motor: 5.5 kW Extraction fan motor: 0.25 kW Unloading transfer motors: 3.0 kW Guillotine group motors: 8.1 kW Conveyor belt motor: 0.75 kW Thermoregulator units: 25.65 kW Chiller unit: 16.25 kW Ancillary equipment maximum consumption: 3.89 kW Maximum installed power: 269 kW Typical operating power (50% load): 135 kW Pneumatic System Forming tank capacity: 2 m³/cycle Pneumatic system pressure: 600 kPa Air consumption (VGS): 0.85 m³/cycle Air consumption (movements): 0.35 m³/cycle Air consumption (cooling): 0.90 m³/cycle Air consumption (pressure forming at 200 kPa): 3.2 m³/cycle Total air consumption: 4.85 m³/cycle Mechanical Characteristics Forming platen closing force: 400,000 N (400 kN) Maximum mould + reduction frame weight: 2,200 kg Machine weight: 30,000 kg (30 tonnes) Water Chiller Unit Chiller tank capacity: 240 litres + piping Water inlet pressure: > 0.1 kPa Water outlet pressure: 0 kPa Water inlet temperature: 20 to 25 °C Utilities Required Electrical supply: 269 kW installed load Compressed air: 600 kPa pressure, 4.85 m³/cycle consumption Cooling water: 20-25 °C inlet temperature Chilled water tank: 240 litres minimum capacity Fully automatic thermoforming machine designed to shape plastic sheets up to 2200 × 900 mm with a maximum forming depth of 600 mm, suitable for high-capacity industrial applications. Thermoformer details: Forming area 2200mm x 900mm Max forming depth 600mm 3x loading stations. 1 x heating station. - (pre-heating, final heating, upper and lower elements) ceramic/quartz infrared elements Pressure and vacuum forming operation. 4 x side trimming presses. (rotary) Guillotine. Scrap collection end station. Automation: Fully automatic batch processing with operator control panel featuring manual/automatic modes. Industrial-grade construction with multiple access doors, observation windows, and integrated ventilation heat management. Applications - High-throughput environments; this COMI machine is ideal for producing refrigerator liners, door panels, containers, and other thermoplastic components where consistent quality, large sheet handling, and repeatable forming cycles are essential.

Condition: used, functionality: fully functional, With this listing, you are purchasing a used “GMP Qtopic-380 Auto” laminating machine Item for Sale: 1 x GMP Qtopic-380 Auto We can easily configure the machine to meet your specific needs. Please feel free to contact us! Condition: This listing is for a used machine, which may show signs of wear (minor scratches or discoloration). The unit has been tested to ensure it is in working order Packaging and Shipping: Bjdszmtkmjpfx Afwjll You are welcome to view the unit during our business hours. Please schedule an appointment! Seaworthy packaging and worldwide shipping are available upon request! A functional test will be recorded on video for you prior to shipping or pickup. For more information, please feel free to contact us directly.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “GMP Eurolam III -540” laminator Item for Sale: 1x GMP Eurolam III -540 incl. compressor Condition: This listing is for a used device, which may show signs of wear (minor scratches or discoloration). Bjdjzlxykjpfx Afwoll The device has been tested for functionality. A test print can be seen in the photo. Packaging and Shipping: You are welcome to view the device during our business hours. Please schedule an appointment! Sea-worthy packaging and worldwide shipping are available upon request! Before shipping or pickup, we’ll record a video of a functionality test for you. For more information, you’re welcome to contact us directly.

Condition: used, Year of construction: 2015, Laminiermaschine / Laminator GMP Eurolam IDH 540IIIYear 2015 - Serial-No. CJ00340K Bogengröße / Paper Size max. 540x740mm Arbeitsgeschwindigkeit / Laminating Speed max. 30m/min Papierstärke / Substrate Thickness 120-350g/㎡ Front Roller Diameter T: 163mm / B: 150mm Rear Roller Diameter Laminating Temperture max. 150℃ Bledpfsq Sbp Rox Afwsl Power Consumption 12kWDie Maschine verfügt über eine Induktionsheizung, pneumatischen Zylinder-Andruck und eine professionelle PID-Temperaturkontrolle. Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Drill, pillar drill, column drill, column drilling machine -Manufacturer: Super Condor, pillar drill type 20 22 Bodpet Hy Urefx Afwell -Engine: unfortunately no type designation -Speed: Gearbox V-belt 8-speed -Table size: 255 x 255 mm, travel 670 mm -Spindle holder: MK2 -Spindle stroke: 120 mm -Feed device: yes -Projection: 205 mm -Column Ø: 100 mm -Dimensions: 830/380/H1730mm -Weight: 205 kg with pallet

Condition: excellent (used), Pneumatic pressure switches Type: MDR2/11 -Number: 7x pneumatic pressure switches available Price: per piece Bsdpfx Ajb A Sv Sofwell -Weight: 0.3 kg

Condition: good (used), GMP Surelam-Pro 500D Roll Laminator Production-ready, This high-quality machine is manufactured in Korea. Bedpfxszlgb Ao Afwsll Description: The GMP SURELAM laminator is a professional roll laminator with a working width of 500 mm. This laminator is ideal for a small printing company, advertising agency, or office. This device allows us to laminate a variety of materials thanks to independent heating control of the upper and lower rollers. Electronic lamination process control and two operating modes: manual and automatic, make working with this machine easy and enjoyable, and ensures laminations are always of the highest quality. The laminator offers single- or double-sided lamination options. Includes laminating pouch Technical specifications: – Maximum laminating width: 500 mm – Pouch thickness: 25-500 microns – Lamination speed: 700 mm/min – Pressure adjustment: manual – Temperature control: digital – Power supply: 230 V – Power: 3000 W

Year of construction: 2007, condition: excellent (used), machine/vehicle number: T805L30030, Max. Laminating Width : 800 mm Blodpfx Afoh Nxy Uswol

Year of construction: 2024, condition: used, Type of fuel: Diesel Blodpjy Aq Rxofx Afwel New: Yes

Condition: excellent (used), two speed with switch belt gear Bljdpfx Aoyxl Nzefwjl motor power 0,8kW clamp connection 380V

Condition: excellent (used), two speed with switch Blodpfx Ajyxcxasfwel belt gear motor power 0,8kW clamp connection 380V

Condition: good (used), Year of construction: 1996, functionality: fully functional, turning diameter over cross slide: 185 mm, spindle bore: 40 mm, spindle speed (max.): 2,800 rpm, total height: 1,290 mm, total length: 1,850 mm, total width: 880 mm, turning diameter over bed slide: 330 mm, type of input current: three-phase, overall weight: 1,150 kg, spindle mount: MK 5, Conventional lathe, Weiler, in good condition! Bjdpfx Aszx Uqljfwsll Year of manufacture: 1996 Includes collet chuck!

Condition: good (used), functionality: fully functional, Used L + Z lathe with 3-axis digital readout Manufacturer: WEILER Type: Condor 81 B Machine. No.: 87596 Year of manufacture: approx. 1987 Center distance: 750 mm Turning diameter over bed: Ø 330 mm Center height above bed: 165 mm Turning diameter over support: Ø 180 mm Center height above support: 90 mm Spindle bore: Ø 40 mm Tailstock inner taper: MK 3 Pinol adjustment: 110 mm Spindle speed: 45 - 2800 rpm. (16 steps + 2 motor speeds) Feed range: 0.016 - 0.50 mm/rev Drive power: 1.6 + 3.2 kW (drive motor stage 1+2) Mains connection: 400 Volt, 50 Hz Connected load: 32 kW Control voltage: 42 Volt Equipment + accessories: - 3-axis digital readout from Heidenhain type VRZ 750 - Quick clamping device and various collets + draw tube - 3-jaw power chuck Ø 160 mm Forkardt F160 - Multifix size B quick-change steel holder - LED work light - Bed stop - Automatic longitudinal & face feeds - Electro-mechanical spindle brake switchable - 2x emergency stop - Electrical feed key query (via sleeve with button) - Coolant tank with pump in the machine base - Folding chuck guard - Splash guard - Circuit diagram - Adjustable machine feet Bodpfx Afjvadqzswoll Space requirement: 1850 x 950 x 1400 mm (L x W x H) Weight: approx. 1100 kg This new generation of Weiler lathes is very user-friendly and robust. Machine can be demonstrated on site under power. All information without guarantee. Subject to prior sale.

Condition: excellent (used), functionality: fully functional, center height: 165 mm, bar diameter (max.): 40 mm, WEILER CONDOR VS 2 -Condition: “Good” -Maximum turning diameter: 165 mm -Swing over bed: 330 mm -Distance between centers: 800 mm -Spindle speed range: 28-2800 rpm -Automatic longitudinal / cross feeds -Spindle bore: 40 mm -Threading capabilities: Metric, inch, etc. -Collet chuck - quick-change tool holder incl. collets -3-jaw chuck -Faceplate -Multifix system with inserts -Emergency stop Bjdpfxszvy T Te Afwoll -Documentation

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, L & Z Lathe WEILER CONDOR B incl. three-axis digital display -CE marking -Machine from an educational institution / very well maintained -Center height 165mm -Swinging diameter over bed 330mm -Swinging diameter over cross slide 185mm -Turning length 800mm -Spindle speeds 22 - 2800 rpm -Automatic / longitudinal and cross feeds -Threading / metric / inch, etc. -Bar capacity 40mm -Tailstock / Morse taper MT3 -Multifix base and inserts -Three-jaw chuck 200mm -Electric chuck guard -Spindle cover Bsdpfxozvx A To Afwoll -2x Emergency stop -Coolant system -Chip guard -Documentation Dimensions: L x W x H 1.8 x 0.8 x 1.6 meters / Weight 1200 kg Errors and omissions excepted.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1289892, FREWITT MG-800 OSCILLATING SCREENING AND GRANULATING MACHINE Pharmaceutical version – Stainless steel – Comprehensive documentation DESCRIPTION For sale is a Frewitt MG-800 oscillating screening and granulating machine in high-quality stainless steel/pharmaceutical version. The machine is in very good and well-maintained condition and is fully functional. The MG-800 is suitable for the controlled crushing, granulation and screening of products, especially in the pharmaceutical, chemical and food industries. The oscillating operating principle, in combination with interchangeable screen inserts, allows for adaptation to different products and desired particle sizes. PHARMACEUTICAL/STAINLESS STEEL VERSION The original Frewitt specification documents a high-quality stainless steel design: Bsdpfx Ajvt Sywsfwsll - Machine body stainless steel 1.4401 - Product-contacting parts stainless steel 1.4301 - Product-contacting interior surfaces polished - High-quality, hygienic design - Enclosed machine design The system was designed for professional use in demanding production environments. TECHNICAL DATA Manufacturer: Frewitt, Switzerland Model: MG-800 Machine No.: 1289892 Machine type: Oscillating screening/granulating machine Voltage: 380 V Frequency: 50 Hz Current consumption: 4.4 A Version: Stainless steel / Pharmaceutical version EQUIPMENT - Frewitt MG-800 granulating machine - Stainless steel feeding system - Stainless steel discharge system - Rotor - Screen basket - Extensive selection of various screen inserts - Infinitely adjustable speed control - Protection and safety devices - Separate operating/control unit - Sturdy stainless steel base - Extensive stainless steel piping and connections The various screen inserts available allow for flexible adaptation to different products and desired granule or particle sizes. DOCUMENTATION Extensive original Frewitt documentation is available for the machine, including: - Technical documents - Original drawings - Design drawings - Specification and material specifications - Spare parts/component information The available original documentation is particularly advantageous for use in pharmaceutical and industrial environments. CONDITION / FUNCTION The machine is in very good used condition and is fully functional. Inspection and test run are possible by arrangement at our premises. Price on request. Subject to prior sale and errors.