Used Cormak Bending Machine For Tubes And Profiles for sale (73,460)

Condition: ready for operation (used), Year of construction: 1966, A Häusler rolling and bending machine is available. Number of rollers: 3, section modulus: 46cm², max. flat material capacity at 1000mm: 100mm/20mm, max. pipe capacity at 900mm: 102mm/6mm, max. square material capacity at 600mm: 60mm/60mm, max. T-profile capacity at 1200mm: 1200mm/1200mm/13mm, shaft diameter range: 125mm-135mm, machine dimensions X/Y/Z: approx. 4500mm/1700mm/1500mm, weight: approx. 6500kg. An on-site inspection is possible. Podsy Ax U Eepfx Afgopt

Condition: used, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Podpfx Afod E A I Ijgept Tube bending unit with SIEMENS servo motor and planetary gearbox Year of construction: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - last used for round tube Ø 15.4 x 0.8 mm, R60 mm - Bending tools and bending jaws interchangeable - Bending tool drive via AC servo motor and Alpha spur gear, planetary gearbox - 2-part bending tool opens and closes via hydraulic stroke movement - MERKLE hydraulic round block cylinder, item 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending jaw via Festo compressed air cylinder - without electrical control - without hydraulic unit Dimensions L/W/H 760 x 400 x 150 mm weight: approx. 60 kg good condition Removed from a functional special machine, tested before removal. Drive: Brushless permanent magnet servo motor SIEMENS Typ:1FK6061-7AF71-1EG0 Nominal torque = MO: 6.4 Nm Rated current = Io: 6.1 A Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 pieces available in right-hand version. 5 pieces available in left-hand version. The price quoted refers to 1 bending unit with servo motor. If required, we also sell individual assemblies of the bending unit. We also offer the electrical components for controlling the servo motor. We also offer hydraulic units.

Condition: new, Year of construction: 2026, Electric bending machine for bending pipes and profiles, bars and flat bars depending on the rolls - bending stones used. The machine is additionally equipped with mechanical pressure on the upper roll with vernier. Ideal for bending curves, circles, spirals, etc. Very high empty weight for optimum stability during operation. Complete with foot pedal for left/right drive control. Used in locksmith shops and on construction sites. Max. pipe bending range up to 50 mm. The bending machine allows work in both vertical and horizontal planes. Machine characteristics Electric bender for bending profiles and pipes. The bender allows working in both vertical and horizontal planes. The machine is equipped with mechanically adjustable pressure on the upper roll. Ideal for bending curves, circles, spirals. Bending radius adjustable by means of top pressure device with vernier scale. Application: Bending of profiles and tubes Different profiles can be bent by means of universal rollers Very high unladen weight for optimum stability Ground and hardened directional rollers on the sides, Bending rollers made of robust and hardened steel Operation via foot pedal Vertical and horizontal operation Left/right operation Standard equipment Side guide rollers foot pedal various roller sets DTR in Polish CE declaration Technical data Material: round tube [mm] 50 x 2 Material: rectangular profile [mm] 50 x 50 x 2 Ppodpfxju Snm Ie Afgjt Material: round bar [mm] 35 Material: solid rectangular piece [mm] 35 x 35 Diameter of rollers [mm] 40 Motor power [kW] S1 1.5 / S6 2.2 Power supply 3 phase, 400V Dimensions (L x W x H) [mm] 900 x 850 x 1700 Weight [kg] 485

Condition: new, Year of construction: 2026, Electric bending machine for bending pipes and profiles, bars and flat bars depending on the rolls - bending stones used. The machine is additionally equipped with mechanical pressure on the upper roll with vernier. Ideal for bending curves, circles, spirals, etc. Complete with foot pedal for left/right drive control. Used in locksmith shops and on construction sites. Max pipe bending range up to 30 mm. The bending machine allows working both vertically and horizontally. Machine characteristics Electric bender for bending profiles and pipes. The bender allows working in both vertical and horizontal planes. The machine is equipped with mechanically adjustable pressure on the upper roll. Ideal for bending curves, circles, spirals. Bending radius adjustable by means of top pressure device with vernier scale. Application: Bending of profiles and tubes Different profiles can be bent by means of universal rollers Very high unladen weight for optimum stability Ground and hardened directional rollers on the sides, Bending rollers made of robust and hardened steel Operation via foot pedal Vertical and horizontal operation Left/right operation Standard equipment Side guide rollers foot pedal Driver's manual in Polish CE declaration Technical data Round tube [mm] 30 x 1 Rectangular profile [mm] 30 x 30 x 1 Round bar [mm] 16 Solid rectangular piece [mm] 30 x 10 Shaft diameter [mm] 30 Rotation [rpm] 9 Motor power [kW] 0.75 kW Power supply 3 phase, 400V Dimensions (L x W x H) [mm] 1200 x 750 x 1210 Weight [kg] 252 Podpfx Asu Snlkofgept

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: V00311, bending radius (max.): 135 mm, working height: 1,100 mm, workpiece weight (max.): 2,500 kg, tool diameter: 60 mm, No minimum price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. workpiece weight: 2,500 kg Bending capacity: 63 x 4 mm Usable bending length with physical tube stop: 3,000 mm Working height: 1,100 mm Tool diameter: 60 mm Maximum bending radius: 135 mm MACHINE DETAILS Voltage: 400 V ±10% Permissible voltage fluctuation: max. -15% for 1 minute Frequency: 47-63 Hz Installed power NC1: 9.70 kW Installed power NC2: 9.88 kW Rated current: 31 A Control voltage: 24 V DC CNC voltage: 24 V DC Electrical protection rating: IP55 Pedpfx Ajy Sma Ujfgopt Dimensions (L x W x H): 4,581 x 1,093 x 1,372 mm EQUIPMENT OD 21.3 x 3.2 mm CLR 2.5D (bending tool, clamping jaw, die, pressure bar and POB clamp) OD 25 x 3 mm CLR 2.5D (bending tool, clamping jaw, die, pressure bar and POB clamp) OD 26.9 x 2.5 mm CLR 2.5D (bending tool, clamping jaw, die, pressure bar, mandrel and POB clamp)

Condition: new, The KPB 81, a robust Tube and Profile Rolling Machine, excels in high-performance bending, combining modern mechanical engineering with powerful hydraulics. This advanced machine allows you to bend medium and heavy steel profiles with remarkable precision, making it ideal for various applications in metal construction, locksmithing, and mechanical engineering. Equipped with three motor-driven rollers, hardened and ground shafts, and an overload slip-clutch, the KPB 81 ensures efficiency and safety. The modular roller system provides optimum adaptability for bending a wide range of profiles, while the hydraulically adjustable bending rollers enhance versatility, allowing for both horizontal and vertical machining. Standard equipment includes a digital display, control panel, and operator manual for intuitive operation. To experience the precision and performance of the KPB 81 in the Tube and Profile Rolling Machines category, you can request a quote today. Ppedpon Upglsfx Afget

Condition: ready for operation (used), Year of construction: 1996, Pressing force: 20 t for pipe diameter: 3/8; 1/2; 3/4; 1; 1 1/4 and 1 1/2 and 2" Hydraulic drive: 380 V, 0.55 kW Space requirement: 750 x 650 x 900 mm (height) Pedpfxjy Uv Dns Afgjpt Weight: 170 kg

Condition: new, Year of construction: 2026, shaft diameter: 50 mm, - Shaft diameter 50 mm - Rotates clockwise and counterclockwise Ppedpfxewv Ufas Afgst - Suitable for horizontal/vertical use - Foot control - Emergency stop - Documentation - 400V

Condition: good (used), Year of construction: 1996, Tube diameter: 4-28 mm Wall thickness: / mm Pedoy Uwrtspfx Afgjpt Minimum bending radius: 1.5 x D - 2.0 x D mm Control: Siemens LOGO Delivery rate: 4.5 l/min Max. bending angle +/-: 190° Nominal pressure: 250 bar Operating pressure: 3095 bar Delivery rate: 4.5 l/min Total power requirement: 1.5 kW Drive: Hydraulic cylinder and roller chain

Condition: good (used), – Hydraulic – Adjustable stroke – Foot pedal operation – Includes 5 dies: 2" / 1½" / 1¼" / 1/2" / 1/4" Ppsdpfx Afey T D Hnsget – 380V

Condition: good (used), Year of construction: 2005, control type: CNC control, Tube diameter: 30 mm Wall thickness: 2 mm Max. bending angle: +/- 180 + 10 ° Tube insertion length: 4100 mm Pjdpfxey Ukzuo Afgopt - Round steel tube up to 30 x 2.2 mm² - Round stainless steel tube up to 30 x 1.5 mm - Square tubes 20 x 2.5 mm - Bending time for 90 degrees: 1.5 sec. (feed) - Longitudinal feed speed: 450 mm/sec. - Maximum bending radius: 125 mm - Freestanding bending head, 850 mm long - Bending axis drive: electrohydraulic

Condition: used, Year of construction: 1990, Technical details: Podou Ibvuopfx Afgspt tube diameter: 42 mm wall strength: 25 mm round bar steel: max. Ø 20 mm square material: Rohr 25 x 25 mm bending radius max.: innen max: Ø 20 und außen max: Ø 170 mm bending speed: keine Angaben °/s tube pipe draw up length: 3000 mm control: Software RC 7000 weight of the machine ca.: 2,8 t dimensions electric cabinet: 800 x 700 x 2000 mm dimension machine xH: 5,1 x 0,7 x 2,0 m Application: Machining of deformable tubes, rectangular tubes and round bars and square tubes. Description of the software RC7000, programming manual rectangular tube 42 x 20 x 2,5mm bending direction to the left Operation via control panel with monitor Accessories: -div. bending tools for tube Ø 25mm -12 div. collets -div. auxiliary and clamping devices *

Condition: ready for operation (used), ERCOLINA TOPBENDER with 2-axis positioning system / 3 meters -CE marking -Pipe capacity 60mm -Bending radius R10-R300 -Bending angle 0-180 degrees -Motor power 1.5 KW -Bending speed 1.25-1.5 revolutions/min -Includes 2-axis positioning system / 3 meters -2 sets of tooling with sliding shoe R100-1-1/4 & R67-25mm Ppjdpfx Ajy T Namefgst -Foot switch -Documentation Dimensions: L x W x H (base machine) 0.7 x 0.9 x 1.4 meters / Total weight 220 kg Errors and omissions excepted.

Condition: new, Year of construction: 2026, functionality: fully functional, ALMI AL-U for zinc spout in pipes with outer diameter from Ø22 to Ø76 mm Pipe notch for zinc spout in pipes with outside diameters Podpoy T N S Ajfx Afgept diameter from Ø22 to Ø76 mm for cutting out vent slots from round and rectangular metal pipes from rectangular metal pipes from 22 mm outer diameter Easy to attach to the wall Wall thickness max. 3 mm steel, 2.5 mm VA, weight 7 kg

Condition: new, Year of construction: 2026, functionality: fully functional, ALMI pipe notcher AL2 for pipes with outer diameter Ø48.3 (1 1/2″) and Ø60.3 (2") mm Podpfoy T N Svsx Afgopt Pipe notcher for pipes with outer diameter Ø48.3 (1 1/2″) and Ø60.3 (2") mm Easy to attach to the wall Ideal for double corner connections Wall thickness max. 3 mm steel, 2.5 mm VA, weight 15 kg

Condition: new, Year of construction: 2025, functionality: fully functional, ALMI pipe notcher AL1 for pipes with an outer diameter of Ø26.9 (3/4″), Ø33.7 (1″) and Ø42.4 (1 ¼") mm Pipe notcher for pipes with outer diameter Ppjdpfx Ajy T N Spsfget Ø26.9 (3/4″), Ø33.7 (1″) and Ø42.4 (1 ¼") mm Easy to attach to the wall Ideal for double corner connections Wall thickness max. 3 mm steel, 2.5 mm VA, weight 8 kg

Condition: used, Hydraulic Profile Bending Machine, Pipe Bending Machine LANG Type Ondomat 60 Serial No. 2589 Year of manufacture: 1970 Bending capacity max.: Ø 60 x 2 mm Pressing force: 20 tons Pjdpfx Aeyi Hrwjfgspt Counterforce: 7.5 tons Maximum bending angle: 135° Tool stroke: 250 mm Maximum tool width: 125 mm External width of tool rocker: 90 mm Motor power: 18 kW Power supply: 380 Volt, 50 Hz - Hydraulic bending process with counterpressure cylinder for wrinkle-free bending - Up to 10 different bending angles in sequence via automatic indexing turret - Two-hand control panel - 1 set of bending dies Ø 30 mm, die width rocker = 78 mm, die width counterholder = 50 mm Required space (L x W x H): 2000 x 750 x 1500 mm Weight: approx. 2 tons Good condition

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 24 h, Make: DURMA Type: HD-TC 60170 Fiber Year of construction: 2024 Automatic loading unit 6000 mm Unloading system 4000 mm Laser power: 2000 Watt Control: Siemens Sinumerik 840D Operating hours: 24 h Max. pipe diameter: 170 mm Min. pipe diameter: 20 mm (12 optional) Pjdpfodx Nfwox Afgept Max. Square profile dimensions: 120x120 mm Max. Dimensions of rectangular profiles: 150x100 mm Max. Profile length: 6500 mm Min. profile length: (for automatic feed) 3000 mm Max. Profile weight: 37.5 kg/m Max. Material thickness: (for 2 kW) 8 mm Min. material thickness: 0.8 mm Length of the last inserted part: 185 mm Positioning accuracy: +/- 0.20 mm Repeat accuracy: +/- 0.05 mm Max. Loading capacity: 3000 kg Profile types: round, square, rectangular, elliptical H,C,U,L *Installation area L/W/H: approx. 16000x7400x2350 mm * Weight: approx. 20000 kg * depending on equipment variant Standard equipment Sinumerik 840D control system Autofocusing PRECITEC Procutter cutting head F150 focus Manual unloading table Manual loading Laser diode for defining position points Central lubrication Chip conveyor External user interface for the output of analog values (power-speed-pressure) External CAD/CAM programming software Lantec with autonesting Work area lighting Warning light Various laser cutting options selectable Remote control: remote maintenance access via LAN connection or WLAN CE marking Extended equipment IPG fiber laser source 2000 Watt (incl. cooler) Automatic loading unit 6000 mm Unloading table 4000 mm Filter, compact dust extraction - Vanterm The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration in Staufenberg. We will be happy to send you further information on request.

Condition: as good as new (ex-display), Year of construction: 2024, Make: DURMA Type: HD-TC 60170 Fiber Year of construction: 2024 Automatic loading unit 6000 mm Unloading system 4000 mm Laser power: 2000 Watt Control: Siemens Sinumerik 840D Operating hours: 24 h Max. pipe diameter: 170 mm Min. pipe diameter: 20 mm (12 optional) Max. Square profile dimensions: 120x120 mm Max. Dimensions of rectangular profiles: 150x100 mm Max. Profile length: 6500 mm Min. profile length: (for automatic feed) 3000 mm Max. Profile weight: 37.5 kg/m Max. Material thickness: (for 2 kW) 8 mm Min. material thickness: 0.8 mm Length of the last inserted part: 185 mm Positioning accuracy: +/- 0.20 mm Repeat accuracy: +/- 0.05 mm Max. Loading capacity: 3000 kg Profile types: round, square, rectangular, elliptical H,C,U,L *Installation area L/W/H: approx. 16000x7400x2350 mm Ppodod Tt Atjpfx Afgst * Weight: approx. 20000 kg * depending on equipment variant Standard equipment Sinumerik 840D control system Autofocusing PRECITEC Procutter cutting head F150 focus Manual unloading table Manual loading Laser diode for defining position points Central lubrication Chip conveyor External user interface for the output of analog values (power-speed-pressure) External CAD/CAM programming software Lantec with autonesting Work area lighting Warning light Various laser cutting options selectable Remote control: remote maintenance access via LAN connection or WLAN CE marking Extended equipment IPG fiber laser source 2000 Watt (incl. cooler) Automatic loading unit 6000 mm Unloading table 4000 mm Filter, compact dust extraction - Vanterm The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration in Staufenberg. We will be happy to send you further information on request.

Condition: used, functionality: fully functional, Hydraulic mandrel tube bending machine Complete bending sets with mandrels and bending shoes: Ø 18, 20, 22, 25, 2 x 30 + 35 mm Additional mandrels without bending shoes: Ø 28, 2 x 38 + 42 mm Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel Ppedpfxewnrt Ss Afget

Condition: used, Semi-automatic tube bending machine, mandrel tube bender MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Serial No. Year of construction for simultaneous bending of two steel tube sections up to Ø 12 mm Bending angle max. 90° Tube diameter max. 12 mm Mandrel length approx. 65 mm Rated power 3.5 kW Compressed air max. 6 bar / approx. 1 litre per bending cycle Power supply 400 Volt, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Angle input control via STÖBER Controlbox Series 4000/5000 - SIEMENS S7-200 control with TD200 display Ppsdpfx Afjpu R Nvegjt - Machine without bending tools and without tool storage pins 25 x 183 mm - Only 1 bending mandrel available (see pictures). Required space (L x W x H) 1000 x 1000 x 1500 mm Weight 390 kg Good condition

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, Equipment: documentation/manual, Ercolina ECO 50 V1T is a professional and reliable pipe and profile bending machine. Compact, durable, and easy to operate, it is designed for precise bending of steel, stainless steel, aluminum tubes, as well as square and rectangular profiles. This unit is used but in good working condition, fully tested and ready for operation. ⚙️ Technical Specifications* Model: Ercolina ECO 50 V1T Max. pipe diameter (steel): up to Ø 50 mm Max. square profile: up to 40 × 40 × 3 mm Max. round hollow profile: up to Ø 48 × 3 mm Minimum bending radius: from ~80 mm (depending on tooling) Bending angle: up to 190° (programmable) Control: electronic (V1T version – with digital angle setting and memory) Motor power: approx. 1.5 – 2.2 kW Power supply: 400 V, 3-phase Dimensions: ~1100 × 600 × 1200 mm Weight: approx. 250 – 300 kg ✅ Key Features High-quality Italian brand ERCOLINA. Bending up to 190° with programmable radius. Compact and robust construction. Electronic angle setting with memory for fast and accurate production. Suitable for both one-off jobs and serial production. Used but tested and in good working condition. 🎯 Applications Pipe and profile production Railings, furniture, and metal structures Metalworking workshops Small and medium industrial companies Ppsdpfxjxdnx Ho Afgst

Condition: used, Year of construction: 2017, pipe diameter (max.): 80 mm, mandrel length: 4,500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate pipe geometries with bending radii of up to 1.5XD → maximum bending performance pipe 76 x 4 mm (400 N/mm²) Pedpfxottah Ro Afgjpt → maximum bending performance pipe 60 x 60 x 3 mm (400 N/mm²) → maximum bending performance pipe 76 x 2.9 mm (stainless steel) → total connected load 7 kW → pipe length 4.5 mtr Robust and durable steel construction in a force-locking connection - no construction susceptible to torsion due to, for example, the split construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The touch display of the control enables simple and intuitive programming and use of the system. After the pipe has been pushed on, it is fixed in the carriage by the chuck. This enables the pipe to be positioned precisely and thus the creation of dimensionally accurate geometries. The standard also includes checking the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine does not give permission for this. This prevents incorrect operation. Optional additional features provide more convenience and increase the output and thus the efficiency of the system. Data is exchanged from the optional pipe calculation program TBS-3D (PC version) via USB stick or via FTP access from the computer to the machine control system. USB or LAN connectors (RJ45) are available as standard. Existing pipe geometries can be converted quickly and easily, for example, using the STEP format. Standard equipment: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec.) → Bending direction left → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic twist measurement ±0.1° → Manual stop system (overtravel stops in length) → Manual locking system (15° in twist) → Three-jaw chuck for locking the pipe in the carriage → External control panel PLC control: → Touchscreen 10.1" → ETH 10/100, X2X Link, USB → Foot switch operation → Data transfer via network (W)LAN or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The control calculates the feed values directly after entering the length and angle and the bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic pipe clamping with adjustable clamping pressure → Programmable early mandrel retraction Options (can be ordered as additional equipment): → Variable bending speed using frequency converters or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + twist) → Mobile version (rollers) → Radius extension Pictures show new machine

Condition: good (used), Year of construction: 1999, overall weight: 2,900 kg, total length: 1,800 mm, total width: 1,900 mm, total height: 2,200 mm, Length:1800mm Ppsdpfjycu E Eox Afgst Width:1900mm Height:2200mm Weight:2900kg

Condition: excellent (used), Year of construction: 2013, controller manufacturer: ELFRAN Digital Read Out, number of rollers: 3, shaft diameter: 130 mm, overall weight: 5,800 kg, total length: 2,200 mm, total width: 2,400 mm, total height: 2,000 mm, Profile bending machine FACCIN - RCMI 130 MACH-ID 9451 Make: FACCIN Type: RCMI 130 Control: ELFRAN Digital Read Out Year: 2013 3 rolls driven 2 lateral guide rolls Digital readout for position rolls Set hardned universal rolls Set hardned profile rolls Horizontal and vertical:|Horizontal and Vertical Shaft Ø: 130mm Number of rolls: 3 Capacity flat: 240 x 30 x 1000mm Capacity Tube: 140 x 5 x 1500Ø x mm Capacity bar: 80 x 80 x 900mm Capacity T-Profile: 140 x 15 x 1400mm Capacity HEA-Profile: 160 x 1700mm Podpfeyrq Dvsx Afgspt Working speed: 0 - 6000mm/min. Side supports: 2 x Hydraulic side arms Length: 2200mm Width: 2400mm Height: 2000mm Weight: 5800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!