Used Cormak Luft 700 for sale (7,080)

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Package for Demanding Applications – ENERGY SAVER SET INCLUDES: LUFT 700 VSD+PM COMPACT screw compressor with dryer Horizontal compressed air tank – 500 L Key Features of the Energy Saver Series 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels of IE4 or even IE5 Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range) Bjdpsycg Ryefx Aqwoll Are smaller, lighter, and generate less heat 2. Advanced VSD Inverter Control The heart of the Energy Saver line is the frequency inverter (VSD). Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy. Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Saves the electrical installation in the facility Allows frequent start/stop cycles without overheating the windings 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters. Longer service life: No sudden pressure and temperature spikes prolong the screw stage life. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 1840 × 640 × 1470 mm Weight: 320 kg

Condition: new, Year of construction: 2026, functionality: fully functional, LUFT 700 COMPACT Screw Compressor with Refrigerated Air Dryer and 500 L Compressed Air Tank The LUFT 700 COMPACT screw compressor with an integrated refrigerated air dryer and a 500 L compressed air tank is a modern solution designed for reliable and efficient compressed air supply. The CORMAK LUFT series screw compressors combine state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. THE SET INCLUDES: LUFT 700 COMPACT screw compressor with refrigerated air dryer 500 L horizontal compressed air receiver Are you looking for a professional solution for powering pneumatic tools in a workshop, paint shop or small production line? The CORMAK LUFT 700 COMPACT screw compressor with refrigerated air dryer is an excellent choice. With a 5.5 kW motor and an impressive actual output of up to 690 l/min, it provides a continuous supply of compressed air required for efficient operation of impact wrenches, blow guns and painting tools. It can also be used as a compressor for small sandblasting machines. This model has been designed for continuous-duty operation, making it ideal for demanding applications such as tyre service centres, automotive workshops and small manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The screw compressor is also equipped with an integrated refrigerated compressed air dryer, which provides dry and clean air while protecting the compressed air system against corrosion and damage. The LUFT 700 COMPACT oil-injected screw compressor with dryer features a traditional belt drive, resulting in easier maintenance and lower servicing costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and a worn belt can be easily replaced with a new one. Extended Component Service Life The belt drive also contributes to longer component life. The absence of a rigid connection between the motor and the compressor's working components reduces mechanical wear and stress, helping to extend the service life of the system. The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM electronic control panel, giving the operator access to key machine information and greater flexibility and control over the production process. Key Parameters ✅ Pressure: up to 10 bar ✅ Air output: up to 690 l/min ✅ Motor power: 5.5 kW Technical Specifications Parameter Specification Motor power 5.5 kW Voltage 400 V / 50 Hz Output at 0–6 bar 690 l/min Output at 6 bar 650 l/min Output at 8 bar 650 l/min Bsdpfx Aqerh E Erjwell Output at 10 bar 630 l/min Outlet connection diameter (G) 3/4" Dimensions 1840 × 650 × 1675 mm Weight 370 kg

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Screw Compressor – Compact Power for Your Business – ENERGY SAVER Are you looking for a professional solution to power pneumatic tools in a workshop, paint shop, or a small production line? The CORMAK LUFT 700 VSD+PM screw compressor is the perfect choice. With a power output of 5.5 kW and an impressive actual air delivery of up to 690 l/min, it ensures a constant supply of compressed air, essential for the efficient operation of impact wrenches, blow guns, and spray painting tools. This model, powered by 400V, is designed for continuous operation, making it ideal for demanding applications such as small workshops, tire service centers, and craft businesses. Investing in a CORMAK screw compressor is a step toward significantly improved working comfort—say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The LUFT 700 VSD+PM features a reliable and robust direct drive system that eliminates vibrations and the need for belt transmission adjustments. This proven solution guarantees stable performance and long service life by ensuring direct power transfer from the motor to the screw module. The maximum pressure generated by this screw compressor is 10 bar. Full control over the operating parameters is provided by an intuitive MAM-series electronic control panel, giving you access to key compressor information and increasing flexibility and control over your processes. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 l/min Air delivery at 6 bar: 690 l/min Air delivery at 8 bar: 650 l/min Air delivery at 10 bar: 650 l/min Bljdpeycctqsfx Aqwel Outlet connection (G): 1/2" Dimensions: 800 × 520 × 740 mm Weight: 100 kg

Condition: new, Year of construction: 2026, LUFT 700 VSD+PM COMPACT Screw Compressor with Refrigerated Air Dryer The LUFT 700 VSD+PM COMPACT screw compressor with an integrated refrigerated compressed air dryer combines state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Are you looking for a professional solution for powering pneumatic tools in a workshop, paint shop or small production line? The CORMAK LUFT 700 VSD+PM COMPACT screw compressor with refrigerated air dryer is an excellent choice. With a 5.5 kW motor and an impressive actual output of up to 690 l/min, it provides a continuous supply of compressed air required for efficient operation of impact wrenches, blow guns and painting tools. It can also be used as a compressor for sandblasting applications. This model has been designed for continuous-duty operation, making it ideal for demanding applications such as tyre service centres, large automotive workshops and manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The screw compressor is also equipped with an integrated refrigerated compressed air dryer, which provides dry and clean air while protecting the compressed air system against corrosion and damage. The LUFT 700 VSD+PM COMPACT oil-injected screw compressor with refrigerated air dryer features a traditional belt drive, resulting in easier maintenance and lower servicing costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and a worn belt can be easily replaced with a new one. Extended Component Service Life The belt drive also contributes to longer component life. The absence of a rigid connection between the motor and the compressor's working components reduces mechanical wear and stress, helping to extend the service life of the system. The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM electronic control panel, giving the operator access to key machine information and greater flexibility and control over the production process. Key Parameters Blsdpfoybvkaox Aqwol ✅ Pressure: up to 10 bar ✅ Air output: up to 690 l/min ✅ Motor power: 5.5 kW Technical Specifications Parameter Specification Motor power 5.5 kW / 7.5 HP Voltage 400 V / 50 Hz Output at 0–6 bar Average 690 l/min Output at 6 bar 690 l/min Output at 8 bar 650 l/min Output at 10 bar 650 l/min Outlet connection diameter (G) 1/2" Dimensions 1350 × 600 × 850 mm Weight 200 kg

Condition: new, Year of construction: 2026, Set including the LUFT 700 VSD+PM screw compressor and a vertical 200-liter compressed air tank with fittings. The LUFT series screw compressor from the Polish brand CORMAK represents state-of-the-art pneumatic solutions combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high efficiency guarantee reliable and trouble-free operation. Compressor Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400 V / 50 Hz Air delivery at 0–6 bar: approx. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 800 × 520 × 740 mm Weight: 100 kg 200 L Pressure Tank – Technical Specifications Weight: 80 kg Number of connections: 6 Connection sizes: 1/2", 1", 2" Overall dimensions: 166.5 × 45 cm Tank capacity: 200 L Blodpeyguirsfx Aqwjl Working pressure: 11 bar Wall thickness: 4 mm Diameter: Ø 450 mm Height: 1665 mm Important Notice! The accessory set does not include a safety valve. A suitable safety valve must be purchased and installed separately by the user.

Condition: new, Year of construction: 2026, functionality: fully functional, Set including LUFT 700 screw compressor, N10S refrigeration air dryer. The screw compressor of the Polish brand CORMAK, the LUFT series, is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Technical parameters LUFT 700 COMPACT Compressor Engine power 5.5kW Dehumidifier Engine power 0.29kW General parameters Capacity at 0-6 bar 680 lpm Capacity at 6 bar 650L/min Capacity at 8 bar 650 lpm Capacity at 10 bar 620 lpm Outlet G3/4" Overall dimensions 1250 x 600 x 895 mm Weight 380 kg Bodpfjrh E Diox Aqwoll Manufacturer: Cormak

Condition: new, Year of construction: 2026, Are you looking for a professional solution to power pneumatic tools in a workshop, paint shop, or small production line? The CORMAK LUFT 700 screw compressor is the perfect choice. With a 5.5 kW motor and an impressive actual air delivery of up to 690 l/min, it ensures a constant supply of compressed air required for the efficient operation of impact wrenches, blow guns, spray painting equipment, and other pneumatic tools. This model is designed for continuous operation, making it ideal for demanding applications such as tire service centers, smaller automotive workshops, and small manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter and more stable operation. The LUFT 700 features a direct-drive system, providing significantly higher efficiency and lower power losses compared to belt-driven models. This innovative solution guarantees optimal utilization of motor power, resulting in higher performance with lower energy consumption. The maximum pressure generated by this screw compressor is 10 bar. Full control over operating parameters is provided by the intuitive MAM-series electronic control panel, giving you access to key compressor information and increasing flexibility and process control. Are you looking for solutions that exceed market standards? CORMAK screw compressors are synonymous with innovation and reliability, designed for the most demanding applications. The combination of the proven reliability of an induction motor with intelligent control makes this screw compressor an extremely efficient, economical, and flexible source of compressed air, perfectly suited to the dynamic needs of modern industry. High-quality CORMAK screw compressors, such as the LUFT 700 model, are based on technologically advanced screw airends that determine their efficiency and reliability. By combining proven engineering solutions with innovation, CORMAK ensures that every airend is refined down to the smallest detail to withstand even the most intensive operating conditions. In CORMAK screw compressors, such as the LUFT 700, a key component ensuring reliability and optimized operation is the advanced MAM-series control panel. Designed for efficient compressed air system management, this controller enables continuous monitoring and rapid response to all operating parameters. TECHNICAL SPECIFICATIONS Motor power: 5.5 kW Power supply: 400V / 50Hz Air delivery at 0–6 bar: 690 L/min Air delivery at 6 bar: 650 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 630 L/min Outlet connection (G): 1/2" Dimensions: 1445 × 610 × 1410 mm Bsdpfx Aqsza Aptewoll Weight: 200 kg

Condition: new, Year of construction: 2026, Filter set essential for oil replacement in CORMAK screw compressors – suitable for models: LUFT 700 / LUFT 700 COMPACT / THEOR 7.5-10 Oil filter is essential for maintaining the cleanliness of the lubricating oil circulating in the system. It removes impurities and metal particles produced during normal wear. Clean oil ensures proper lubrication and cooling of moving parts, and also extends the life of the oil separator. Purpose: Removing contaminants from the lubricating and cooling oil. Benefits: Protection of bearings and screw components, reduced friction and overheating, longer oil lifespan. Air filter is the first line of defence for your compressor. It effectively captures solid particles, dust, and contaminants from the environment before they reach the screw block. Using a clean air filter prevents wear of compression components and minimises the risk of contamination of oil and compressed air. Purpose: Protecting the screw block and the rest of the system from contaminants from the surrounding air. Benefits: Increased compressor durability, maintained efficiency, reduced energy consumption. Oil separator filter (separator) is a crucial element of the oil compressor, designed to separate oil droplets from compressed air. A high-quality separator ensures minimal oil content in the outgoing air, which is vital for protecting pneumatic tools and production processes. Regular replacement prevents pressure loss and excessive oil consumption. Purpose: Achieving high-quality compressed air through effective separation of oil mist. Benefits: Low operating costs (reduced oil consumption), no contamination of the pneumatic system, stable pressure maintenance. Why Choose Our Filters? Full Compatibility: The offered filters are perfectly matched to the technical specifications of CORMAK screw compressors. Bljdpfx Aeycf D Soqwjl High Filtration Quality: Use of filtration materials with a large surface area and precise micron rating. Optimal Price: We provide high quality at a competitive price, offering an economical alternative to original parts. Take care of your CORMAK compressor today!

Condition: new, Year of construction: 2026, CORMAK PSM200 – Industrial Mobile Belt Grinder for Metal The CORMAK PSM200 is an industrial-grade mobile belt grinder for metal, designed for intensive grinding, deburring, and polishing of large surfaces, weld seams, and workpieces that are difficult to process on stationary machines. Thanks to its integrated dust extraction system and compact design, it enables efficient operation in changing workshop conditions and directly on assembly sites. Main Advantages Belt grinder with dust extraction – the integrated dust extraction system provides a clean and safe working environment. Mobility and compact design – ideal for workshop and assembly applications. Robust construction – the rigid frame ensures high machining accuracy even under intensive use. High grinding efficiency – optimized for grinding surfaces and weld seams. Adjustable depth stop – enables precise control of the material removal depth. Easy and quick operation – ergonomic design and a simple control system. Construction and Technology The CORMAK PSM200 is based on a robust construction designed to ensure stability and vibration damping, significantly improving operating comfort and precision. The 2.8 kW motor, powered by a single-phase 230 V supply, provides sufficient power reserve for continuous operation. The machine is equipped with a Ø200 × 300 mm flap wheel, ideal for smoothing edges, flat surfaces, and irregular metal surfaces. The integrated dust extraction system improves operator safety by reducing exposure to grinding dust. Precision and Performance The CORMAK PSM200 grinder has been designed for demanding industrial applications. The large working tool diameter and precise control of the machining depth enable consistent results, even when processing large workpieces. The adjustable grinding depth allows the operator to adapt the machine to the specific task, minimizing setup and changeover time. Applications The machine is designed for: welding and metalworking workshops, manufacturers of steel structures, railings, and tanks, industrial plants processing components that are difficult to clamp, service and maintenance teams, work carried out directly at assembly sites or in serial production. Standard Equipment Ø200 × 300 mm flap wheel Dust extraction system with filter Robust construction with adjustable depth stop Power cable with 230 V plug Protective housing for working components Technical Data Parameter Specification Power supply 230 V Motor power 2.8 kW Flap wheel size Ø200 × 300 mm Packaging dimensions 700 × 1000 × 600 mm Bodpfx Aezynnyoqwell

Condition: new, Year of construction: 2026, The LUFT screw compressor is the latest solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease to use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. CORMAK screw compressors: When you expect the highest quality and efficiency! Are you looking for solutions that exceed market standards? CORMAK screw compressors are synonymous with innovation and reliability, created with the most demanding applications in mind. Innovative design: Our compressors are based on advanced engineering and European precision. The solid design, enriched with modern components, guarantees long-term and trouble-free operation in all conditions. Quiet operation and comfort: Designed with attention to detail, our compressors are characterized by an exceptionally low noise level. Effective sound and vibration reduction systems provide a comfortable working environment, which translates into better concentration and well-being of operators. Intelligent control: The intuitive electronic control panel from the MAM series is the command center of your compressor. It allows precise monitoring of parameters, maintenance planning and quick diagnostics, ensuring stability and protection of key components. Adaptation to needs: We understand that each application is unique. CORMAK compressors can be configured with additional air treatment systems, allowing for a perfect fit to the specific requirements of your industry. Dynamic working pressure: Automatic pressure regulation ensures that the compressor delivers exactly the amount of compressed air needed at a given time, maximizing energy efficiency and minimizing losses. Sustainability: We focus on environmentally friendly solutions. Energy-saving technologies used in our compressors not only reduce your bills, but also reduce the impact on the environment, and the heat recovery option allows for maximum energy use. CORMAK: Technology that drives your success! Technical parameters Engine power 5.5 kW Voltage 400V/50Hz Efficiency 0-6 bar 690 L/min Efficiency at 6 bar 650 L/min Capacity at 8 bar 650 L/min Capacity at 10 bar 630 L/min Outlet port diameter (G) 1/2" Dimensions 810 x 610 x 850 mm Weight 120 kg Bsdjmqlguspfx Aqwell Manufacturer: Cormak

Condition: new, Year of construction: 2026, The RD700 VARIO is built on a solid column structure that ensures stability and vibration resistance. The radial arm enables precise head positioning from 300 to 700 mm relative to the column, while a quill stroke of 130 mm allows comfortable drilling in one setup. Key Components Spindle: Morse taper MT3 with drawbar, stepless speed control, maximum drilling capacity 32 mm. Feed system: Automatic spindle feed with three ranges, integrated with tapping mode. Main motor: 1.5 kW, 400 V, designed for continuous operation. Table and base plate: 250×250×250 mm cube table and 900×620 mm work plate with T-slots. Precision and Performance With stepless speed regulation and digital indicators, the RD700 VARIO guarantees high machining accuracy and repeatability. The automatic feed and tapping mode reduce cycle times, while the rigid construction minimises vibrations and extends tool life. Applications The CORMAK RD700 VARIO radial drilling machine is ideal for mechanical workshops, toolrooms, production plants, and maintenance departments. It is perfect for machining steel elements, welded structures, machine parts, and industrial components. Standard Equipment Cube table Base Drill chuck 3–16 mm / B18 Mandrel MT3 / B18 Reducing sleeve MK3 / MK2 Cooling system Tapping mode Digital spindle speed indicator Digital drilling depth indicator Adjustable height guard Basic tool set Safety guards User manual CE certification Technical Data *The price quoted is for the machine itself, excluding optional/additional equipment, installation, transport and training— please contact our consultant for more details. Parameter Value Maximum drilling capacity 32 mm Maximum tapping capacity M22 Spindle taper MK3 Minimum spindle speed 75 rpm Bsdpfxeyccn Ue Aqwjll Maximum spindle speed 2,500 rpm Speed change Stepless (75–438 / 438–2,500) Automatic feed range (3) 0.08 / 0.14 / 0.22 mm/rev Spindle–column distance 300–700 mm Spindle–table distance 0–430 mm Spindle–base plate distance 175–680 mm Vertical arm travel 505 mm Horizontal head travel 400 mm Quill stroke 130 mm Column diameter 150 mm Cube table size 250 × 250 × 250 mm Base plate work area 900 × 620 mm Motor power 1.5 kW Power supply 400 V Width 1,220 mm Depth 640 mm Height 1,750 mm Weight approx. 722 kg

Condition: new, Year of construction: 2026, The presented model is an excellent choice for small workshops and manufacturing companies. Thanks to its high air delivery of 950 L/min in relation to its compact dimensions, it can efficiently power several pneumatic tools simultaneously. Its exceptionally low noise level of 68 dB ensures a comfortable working environment, even when the compressor is installed in the same room as operators. Built with premium-quality components, this compressor is designed for continuous operation and is perfectly suited for industrial applications. Energy Saver Series The Energy Saver line is an advanced range of screw compressors engineered to significantly reduce operating costs. Since energy consumption accounts for nearly 80% of the total cost of a compressed air system, these compressors have become the preferred choice for modern industrial facilities. Innovative Design Our compressors combine advanced engineering with European manufacturing precision. Their robust construction and high-quality components ensure reliable, long-lasting performance in demanding working conditions. Maximum Energy Efficiency Thanks to VSD (Variable Speed Drive) inverter technology and intelligent control algorithms, the LUFT 1000 VSD+PM automatically adjusts motor speed and energy consumption to the current compressed air demand. This results in substantial energy savings while maintaining maximum efficiency. Reliable Direct Drive System The LUFT 1000 VSD+PM is equipped with a proven direct drive transmission, minimizing mechanical losses and reducing stress on both the airend and motor. This ensures high efficiency, lower maintenance requirements, and extended service life. Quiet Operation Designed with operator comfort in mind, CORMAK compressors feature highly effective sound insulation and vibration reduction systems, resulting in exceptionally quiet operation and a more comfortable workplace. Intelligent Electronic Controller The advanced MAM electronic controller provides intuitive operation and complete control over compressor performance. It enables continuous monitoring of operating parameters, maintenance scheduling, fault diagnostics, and protection of critical components. Flexible Configuration Every compressed air system has unique requirements. CORMAK compressors can be equipped with additional air treatment systems, allowing the machine to be configured to meet the specific needs of various industries. Dynamic Pressure Control Automatic pressure regulation ensures the compressor supplies exactly the amount of compressed air required at any given moment, maximizing energy efficiency while minimizing unnecessary power consumption. Sustainable Technology Our energy-efficient solutions help reduce operating costs while minimizing environmental impact, making CORMAK compressors both economical and environmentally responsible. Technical Specifications Parameter Value Motor Power 7.5 kW / 11 HP Power Supply 400 V / 50 Hz Air Delivery (0–6 bar) Average 990 L/min Bedpfxezmf Aus Aqwjll Air Delivery at 6 bar 990 L/min Air Delivery at 8 bar 950 L/min Air Delivery at 10 bar 950 L/min Air Outlet Connection G 1/2" Dimensions 900 × 600 × 1840 mm Weight 268 kg

Condition: new, Year of construction: 2026, CORMAK HBS700 Band Saw The CORMAK HBS700 is a high-performance band saw designed for professional cutting of metal, wood, aluminium, and plastic materials. Thanks to its large guide wheel diameter, powerful 4 kW motor, and robust construction, the HBS700 band saw is an ideal solution for production plants, metalworking workshops, woodworking facilities, and industrial applications. Main Advantages of the Machine Large working capacity – maximum cutting height of 430 mm and cutting width of up to 700 mm allow machining of large and heavy workpieces. High-quality work table – a cast iron, ground, and polished table ensures stable material support and precise cutting. Quick blade tensioning lever – reduces setup time and simplifies blade replacement and maintenance. Wide table tilting range – adjustment from -5° to +45° enables precise angled cuts. Blade tension inspection window – allows continuous monitoring of blade tension without stopping the machine. Constant blade speed of 18 m/s – optimized for cutting materials with different hardness levels. Construction and Technology The CORMAK HBS700 is an industrial-class band saw based on a rigid steel structure and a heavy-duty machine frame, ensuring long service life and resistance to deformation. The large band wheels with a diameter of 680 mm provide smooth operation and stable blade guidance. The machine is powered by a three-phase motor with a power rating of 4.0 kW (S1) / 5.6 kW (S6), allowing efficient operation even when cutting thick and demanding materials. Integrated dust extraction outlets 2 × 100 mm enable effective connection to extraction systems for sawdust and chips, significantly improving workplace cleanliness and safety. Bljdjvugtnjpfx Aqwol Precision and Working Efficiency The large work table measuring 790 × 500 mm, combined with a wide cutting blade (up to 40 mm) and a rigid guide system, ensures high-quality and repeatable cuts even in demanding applications. The operator has full control over cutting direction, angle, and depth. The well-balanced construction minimizes vibration and reduces the risk of cutting errors, ensuring smooth and accurate operation. Applications The CORMAK HBS700 band saw is suitable for: Cutting non-ferrous metals and structural steel, Processing solid wood and laminated timber, Prototype and production work in industrial facilities, Cutting technical plastics and composite materials, Use in technical workshops, tool rooms, and metalworking facilities. Standard Equipment High-voltage release safety switch Precision rip fence Cutting blade 5020 × 25 mm, 10 TPI Optional Equipment Extraction hose Ø100 mm Clamps for dust extraction connection Transport trolley or mobile base Technical Specifications Parameter Specification Wheel diameter 680 mm Maximum cutting height 430 mm Maximum cutting width 700 mm Work table dimensions 790 × 500 mm Table tilt range -5° to +45° Blade width range 19 – 40 mm Blade length 5020 mm Blade speed 18 m/s Overall dimensions 1090 × 700 × 2430 mm Weight 308 kg Motor power S1 / S6 4.0 / 5.6 kW Dust extraction outlets 2 × 100 mm Power supply 3-phase, 400 V Operating manual (DTR) Included CE declaration Yes

Condition: new, Year of construction: 2026, CORMAK LUFT 1500 VSD+PM Compact screw compressor with dryer – compact set for demanding applications – ENERGY SAVER SET INCLUDES: LUFT 1500 VSD+PM COMPACT screw compressor with dryer. Horizontal compressed air receiver 500 L. Key features that distinguish these models: 1. Permanent Magnet (PM) Motor Technology Most Energy Saver compressors use Permanent Magnet motors. Unlike standard induction motors: They achieve efficiency levels compliant with IE4 or even IE5 standards. They maintain high efficiency even at very low speeds, where standard motors lose performance. They are smaller, lighter and generate less heat. 2. Advanced Inverter Control (VSD) The core of the Energy Saver line is a frequency converter (inverter). Demand matching: The compressor does not operate on an “all-or-nothing” basis. If your system requires only 30% capacity, it reduces speed accordingly, consuming proportionally less energy. Elimination of idle operation: Conventional compressors often run unloaded for several minutes after filling the tank, consuming around 25–30% of rated power without producing air. Energy Saver models virtually eliminate this loss. 3. Soft Start Bjdpsychbasfx Aqwell Thanks to the inverter, these units start smoothly from 0 Hz, eliminating current surges at start-up, which: Protects the plant’s electrical installation. Allows frequent start-stops without overheating the windings. 4. Real Savings In practice, Energy Saver technology reduces electricity bills by 30% to 50% compared with fixed-speed compressors. It also maintains very stable network pressure (within 0.1 bar), essential for precision equipment such as laser cutters. Extended service life: Smooth pressure and temperature changes prolong screw element life. Technical Parameters Motor power 11 kW / 15 HP Voltage 400V / 50Hz Output 0–6 bar 1620 L/min Output at 6 bar 1580 L/min Output at 8 bar 1350 L/min Output at 10 bar 1230 L/min Outlet connection (G) 1" Dimensions 1600 × 740 × 1750 mm Weight 500 kg

Condition: new, Year of construction: 2026, functionality: fully functional, 230 V Screw Compressor CORMAK screw compressors are a guarantee of quality and reliability. Our many years of experience in selling compressors have allowed us to develop models offering an excellent price-to-quality ratio. The presented model is ideally suited for small workshops and small manufacturing businesses. It offers a high output of 380 l/min in relation to its compact dimensions, allowing several devices to be operated simultaneously. The very low noise level of 60 dB ensures that working in the same room is comfortable and not disruptive. Thanks to the use of high-quality components, the compressor has been designed for continuous-duty operation and can also be used in industrial applications. THE SET INCLUDES: LUFT 400 screw compressor 150 L horizontal compressed air receiver Are you looking for an efficient and reliable compressor for smaller workshops, service centres or hobby applications, while requiring a single-phase power supply? The CORMAK LUFT 400 screw compressor is the ideal solution. With a 3.0 kW motor and an impressive actual output of up to 400 l/min, it provides a continuous supply of compressed air required for efficient operation of impact wrenches, blow guns and painting tools. This model, powered by 230 V / 50 Hz, has been designed for continuous-duty operation, making it ideal for demanding applications such as smaller workshops, tyre service centres and craft businesses. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The LUFT 400 features a reliable and robust direct-drive system, eliminating vibrations and the need for belt-drive adjustment. This proven solution ensures stable operation and a long service life by providing direct power transmission from the motor to the screw compressor element. Bljdpsza Al Uofx Aqwol The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM electronic control panel, giving the operator access to key compressor information and greater flexibility and control over the production process. Key Parameters ✅ Pressure: up to 10 bar ✅ Air output: up to 400 l/min ✅ Motor power: 3.0 kW ✅ Power supply: 230 V Technical Specifications Parameter Specification Motor power 3.0 kW / 4 HP Voltage 230 V / 50 Hz Output at 0–6 bar Average 400 l/min Output at 6 bar 390 l/min Output at 8 bar 380 l/min Output at 10 bar 380 l/min Outlet connection diameter (G) 1/2" Dimensions 1130 × 520 × 1300 mm Weight 170 kg

Condition: new, Year of construction: 2026, LUFT 1500 COMPACT Screw Compressor with Refrigerated Air Dryer The LUFT series screw compressor by the Polish brand Cormak represents the latest innovations in pneumatics, combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Key Features of the Screw Modules in CORMAK Compressors: Modern Technology and Efficiency The screw modules ensure excellent performance and outstanding energy efficiency. Their design focuses on maximizing output while minimizing energy consumption. Precision and Control Thanks to advanced engineering solutions, the screw modules allow for precise control of the compressed air generation process. This translates into stable pressure and optimal operation of the entire pneumatic system. Durability and Reliability The screw modules used in CORMAK compressors are built for longevity. Their sturdy construction and use of high-grade materials ensure reliability even under harsh industrial conditions, minimizing downtime and the need for frequent repairs. Integrated Refrigerated Air Dryer – Top-Level Air Quality Two-Stage Drying System Effectively removes moisture and protects the pneumatic system. Variable-Speed Fan Automatically adjusts cooling capacity according to operating conditions, resulting in energy savings. Dual Filtration System A pre-filter with 3.0 µm accuracy removes larger solid contaminants. A precision filter with 0.1 µm accuracy captures fine oil particles (aerosols) and other impurities, ensuring ultra-clean air. Technical Specifications: Parameter Value Bodexnk Acepfx Aqwsll Motor Power 11 kW Voltage 400V / 50Hz Output (0–6 bar) 1620 L/min Output at 6 bar 1580 L/min Output at 8 bar 1350 L/min Output at 10 bar 1230 L/min Outlet Connection Diameter (G) 1" Dimensions 1550 x 740 x 1150 mm Weight 500 kg Manufacturer: CORMAK

Condition: new, Year of construction: 2026, The CORMAK LUFT 2000 VSD+PM is an excellent choice for truck service workshops, tire service centers, and small manufacturing facilities. Despite its compact dimensions, it delivers an impressive 2,000 L/min actual air output, allowing multiple pneumatic tools to operate simultaneously. Its exceptionally low 74 dB noise level provides a much quieter and more comfortable working environment than conventional piston compressors. Built with premium-quality components, the compressor is designed for continuous-duty industrial operation. Compact Power for Your Business Powered by a 15 kW motor and delivering up to 2,000 L/min, the compressor provides a continuous supply of high-pressure compressed air required for: High-torque impact wrenches Heavy-duty pneumatic tools Truck tire inflation Industrial production equipment Continuous workshop operations Operating on a 400 V / 50 Hz power supply, the unit is engineered for continuous operation, making it ideal for workshops, tire service centers, manufacturing facilities, and various industrial applications. By replacing a conventional piston compressor with the LUFT 2000 VSD+PM, users benefit from significantly quieter operation, greater efficiency, and improved workplace comfort. Reliable Direct Drive System The LUFT 2000 VSD+PM features a proven direct-drive transmission system, eliminating vibration and removing the need for belt adjustment or replacement. Direct power transmission from the motor to the airend ensures: Maximum mechanical efficiency Reduced maintenance requirements Smooth and reliable operation Extended service life Maximum Working Pressure – 13 Bar The compressor delivers a maximum operating pressure of 13 bar, making it suitable for demanding industrial applications requiring higher air pressure. Operation is managed through the intuitive MAM electronic controller, providing real-time monitoring of key operating parameters, maintenance scheduling, diagnostics, and complete control over compressor performance. VSD Inverter Technology The integrated Variable Speed Drive (VSD) inverter continuously adjusts the compressor motor speed according to the actual compressed air demand. Compared with fixed-speed compressors, VSD technology offers: Significant energy savings Reduced electricity consumption Stable system pressure Lower mechanical wear Longer compressor lifetime Lower operating costs Because electric power represents up to 80% of the total lifetime operating cost of a compressor, VSD technology delivers a rapid return on investment. Blsdpfx Aozmgc Aeqwel Premium Screw Airend High-performance CORMAK compressors such as the LUFT 2000 VSD+PM are equipped with technologically advanced screw airends that provide outstanding efficiency and long-term reliability. Technical Specifications Parameter Value Motor Power 15 kW / 20 HP Power Supply 400 V / 50 Hz Air Delivery (0–6 bar) 2,100 L/min Air Delivery at 6 bar 2,000 L/min Air Delivery at 8 bar 1,700 L/min Air Delivery at 10 bar 1,600 L/min Air Outlet Connection G 3/4" Dimensions (L × W × H) 1,080 × 750 × 1,000 mm Weight 400 kg

Condition: new, Year of construction: 2026, functionality: fully functional, LUFT 1000 COMPACT Screw Compressor with Refrigerated Air Dryer and 500 L Compressed Air Tank The LUFT 1000 COMPACT screw compressor with an integrated refrigerated air dryer and a 500 L compressed air tank is a modern solution designed for reliable and efficient compressed air supply. The CORMAK LUFT series screw compressors combine state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. THE SET INCLUDES: LUFT 1000 COMPACT screw compressor with refrigerated air dryer 500 L horizontal compressed air receiver Are you looking for a professional solution for powering pneumatic tools in a workshop, paint shop or small production line? The CORMAK LUFT 1000 COMPACT screw compressor with refrigerated air dryer is an excellent choice. With a 7.5 kW motor and an impressive actual output of up to 990 l/min, it provides a continuous supply of compressed air required for efficient operation of impact wrenches, blow guns and painting tools. It can also be used as a compressor for small sandblasting machines. This model has been designed for continuous-duty operation, making it ideal for demanding applications such as tyre service centres, automotive workshops and small manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The screw compressor is also equipped with an integrated refrigerated compressed air dryer, which provides dry and clean air while protecting the compressed air system against corrosion and damage. The LUFT 1000 COMPACT oil-injected screw compressor with dryer features a traditional belt drive, resulting in easier maintenance and lower servicing costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and a worn belt can be easily replaced with a new one. Extended Component Service Life The belt drive also contributes to longer component life. The absence of a rigid connection between the motor and the compressor's working components reduces mechanical wear and stress, helping to extend the service life of the system. The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM electronic control panel, giving the operator access to key machine information and greater flexibility and control over the production process. Key Parameters ✅ Pressure: up to 10 bar ✅ Air output: up to 990 l/min ✅ Motor power: 7.5 kW Technical Specifications Parameter Specification Motor power 7.5 kW Bjdpforh E Dqjx Aqwell Voltage 400 V / 50 Hz Output at 0–6 bar 990 l/min Output at 6 bar 950 l/min Output at 8 bar 950 l/min Output at 10 bar 930 l/min Outlet connection diameter (G) 3/4" Dimensions 1840 × 650 × 1675 mm Weight 400 kg

Condition: new, Year of construction: 2026, LUFT 1000 COMPACT Screw Compressor with Integrated Refrigeration Air Dryer The LUFT series screw compressor from the Polish brand CORMAK represents the latest advancements in pneumatic technology, combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Key Features: Innovative Design Our compressors are built on advanced engineering and European manufacturing precision. The solid construction, enhanced with modern components, ensures long-lasting and reliable operation in all working conditions. Integrated Refrigeration Dryer The COMPACT version with an integrated dryer offers space-saving and comprehensive functionality in a single unit. The built-in refrigeration dryer ensures clean and dry air, protecting your system from corrosion and damage. Quiet Operation & Comfort Designed with attention to detail, our compressors operate with exceptionally low noise levels. Effective soundproofing and vibration reduction systems provide a comfortable working environment, enhancing operator focus and well-being. Smart Control System The intuitive MAM electronic control panel acts as the command center of your compressor. It allows precise monitoring of parameters, scheduling of maintenance, and quick diagnostics, ensuring system stability and protecting key components. Tailored to Your Needs We understand that every application is unique. CORMAK compressors can be configured with additional air treatment systems to perfectly match the specific requirements of your industry. Dynamic Operating Pressure Automatic pressure adjustment ensures that the compressor delivers exactly the amount of compressed air needed at any given moment, maximizing energy efficiency and minimizing losses. Sustainable Development We prioritize environmentally friendly solutions. The energy-saving technologies used in our compressors not only reduce your energy bills but also minimize environmental impact. The heat recovery option allows for maximum energy utilization. Bljdpfsxmg A Ajx Aqwel Integrated Refrigeration Dryer – Top-Level Air Quality Two-Stage Drying System: Provides effective moisture removal and protection for your pneumatic system. Variable-Speed Fan: Automatically adjusts cooling performance to match working conditions, optimizing energy consumption. Dual Filtration System: Includes a pre-filter with 3.0 µm precision for removing larger solid contaminants, and a fine filter with 0.1 µm precision that captures oil aerosols and other fine particles, ensuring the highest level of air purity. Technical Specifications Parameter Value Motor Power 7.5 kW Voltage 400V / 50Hz Air Delivery (0–6 bar) 990 L/min Air Delivery at 6 bar 950 L/min Air Delivery at 8 bar 950 L/min Air Delivery at 10 bar 930 L/min Outlet Connection Diameter (G) 3/4" Dimensions (L x W x H) 1320 x 650 x 945 mm Weight 320 kg

Condition: new, Year of construction: 2026, LUFT 1500 INVERTER Screw Compressor The LUFT 1500 INVERTER screw compressor combines state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Are you looking for a professional solution for powering pneumatic tools in a workshop, paint shop or production line? The CORMAK LUFT 1500 INVERTER screw compressor is an excellent choice. With an 11 kW motor and an impressive actual output of up to 990 l/min, it provides a continuous supply of compressed air required for efficient operation of impact wrenches, blow guns and painting tools. This model has been designed for continuous-duty operation, making it ideal for demanding applications such as tyre service centres, large automotive workshops and manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The LUFT 1500 INVERTER features a direct-drive system, providing significantly higher efficiency and lower power losses compared with belt-driven models. This innovative solution ensures optimal utilisation of the motor's power, resulting in higher performance and lower energy consumption. The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM electronic control panel, giving the operator access to key compressor information and greater flexibility and control over the production process. Bjdpfx Aqjxnxzaowell Key Parameters ✅ Pressure: up to 10 bar ✅ Air output: up to 1,580 l/min ✅ Motor power: 11 kW Technical Specifications Parameter Specification Motor power 11 kW Voltage 400 V / 50 Hz Output at 0–6 bar 1,620 l/min Output at 6 bar 1,580 l/min Output at 8 bar 1,350 l/min Output at 10 bar 1,230 l/min Outlet connection diameter (G) 1" Dimensions 1170 × 730 × 1020 mm Weight 243 kg Manufacturer Cormak

Condition: new, Year of construction: 2026, NEW ON THE POLISH MARKET 230 V screw compressor Screw compressors from the Polish brand CORMAK are a guarantee of quality and reliability. Our several years of experience in selling compressors has allowed us to create models with an excellent price-quality ratio. The presented model is perfect for small workshops or small manufacturing companies. It is characterized by high efficiency (380 l / min) in relation to its dimensions, which allows you to operate several devices at the same time. Very low noise level (60 dB) makes staying in the same room not inconvenient. Thanks to the high-quality components used, the compressor is designed for continuous operation and can be used in industry. CORMAK screw compressors: When you expect the highest quality and efficiency! Are you looking for solutions that exceed market standards? CORMAK screw compressors are synonymous with innovation and reliability, created with the most demanding applications in mind. Innovative design: Our compressors are based on advanced engineering and European precision workmanship. The solid design, enriched with modern components, guarantees long-term and trouble-free operation in all conditions. Efficiency optimization: Thanks to inverter technology and intelligent algorithms, the LUFT 400 dynamically adjusts energy consumption to the current demand for compressed air. This means a significant reduction in operating costs while maintaining maximum efficiency. Proven drive system: The LUFT 400 compressor uses a reliable direct drive that minimizes loads on the screw block and engine, ensuring efficient operation and long service life. Quiet operation and comfort: Designed with attention to detail, our compressors are characterized by an exceptionally low noise level. Effective sound and vibration reduction systems provide a comfortable working environment, which translates into better concentration and well-being of operators. Intelligent control: The intuitive electronic control panel from the MAM series is the command center of your compressor. It allows precise monitoring of parameters, maintenance planning and quick diagnostics, ensuring stability and protection of key components. Adaptation to needs: We understand that each application is unique. CORMAK compressors can be configured with additional air treatment systems, allowing for a perfect fit to the specific requirements of your industry. Bjdpfx Aqjtz S H Njwoll Dynamic working pressure: Automatic pressure regulation ensures that the compressor delivers exactly the amount of compressed air needed at a given time, maximizing energy efficiency and minimizing losses. Sustainability: We focus on environmentally friendly solutions. Energy-saving technologies used in our compressors not only reduce your bills, but also reduce the impact on the environment, and the heat recovery option allows for maximum energy use. Technical parameters Engine power 3.0 kW / 4 HP Voltage 230V/50Hz Efficiency 0-6 bar average 400 L/min Efficiency at 6 bar 390 L/min Capacity at 8 bar 380 L/min Capacity at 10 bar 380 L/min Outlet port diameter (G) 1/2" Dimensions 800 x 520 x 740 mm Weight 95 kg Manufacturer: Cormak

Condition: new, Year of construction: 2026, LUFT 1000 INVERTER Screw Compressor The LUFT 1000 INVERTER screw compressor combines state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Are you looking for a professional solution for powering pneumatic tools in a workshop, paint shop or production line? The CORMAK LUFT 1000 INVERTER screw compressor is an excellent choice. With a 7.5 kW motor and an impressive actual output of up to 990 l/min, it provides a continuous supply of compressed air required for efficient operation of impact wrenches, blow guns and painting tools. Blodomqlhvjpfx Aqwsl This model has been designed for continuous-duty operation, making it ideal for demanding applications such as tyre service centres, large automotive workshops and manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The LUFT 1000 INVERTER features a direct-drive system, providing significantly higher efficiency and lower power losses compared with belt-driven models. This innovative solution ensures optimal utilisation of the motor's power, resulting in higher performance and lower energy consumption. The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM electronic control panel, giving the operator access to key compressor information and greater flexibility and control over the production process. Key Parameters ✅ Pressure: up to 10 bar ✅ Air output: up to 990 l/min ✅ Motor power: 7.5 kW Technical Specifications Parameter Specification Motor power 7.5 kW Voltage 400 V / 50 Hz Output at 0–6 bar 990 l/min Output at 6 bar 950 l/min Output at 8 bar 950 l/min Output at 10 bar 930 l/min Outlet connection diameter (G) 1/2" Dimensions 810 × 610 × 850 mm Weight 160 kg

Condition: new, Year of construction: 2026, The CORMAK TSC710 planer knife sharpener is an efficient and precise machine designed for sharpening planer knives, wood chipper knives, shredder knives, and other machine knives used in the woodworking industry and manufacturing facilities. With the ability to sharpen knives up to 800 mm in length, this model is an excellent choice wherever accuracy, repeatability, and reliable operation are essential. The machine is designed for professional users who expect perfectly sharpened tools, reduced machine downtime, and full control over the sharpening process. Key Features Planer and machine knife sharpener – enables precise sharpening of knives used in planers, thicknessers, jointers, chippers, and shredders. Sharpening knives up to 800 mm – the large working range allows the machine to handle most knives used in woodworking workshops and manufacturing facilities. Efficient liquid cooling system – protects the cutting edge from overheating and helps maintain the material's properties during grinding. Precise grinding unit guidance – the motor and grinding assembly move along stable linear guides with linear bearings. Simultaneous sharpening of multiple knives – special clamping blocks allow up to 4 thin planer knives to be sharpened in a single cycle. Blodpfx Aqozwlviswol Compact and rigid construction – the 65 kg machine provides excellent stability, reduces vibration, and improves operator comfort. Construction and Technology The CORMAK TSC710 is equipped with a grinding assembly that moves along linear guides. This solution ensures smooth and uniform movement of the grinding wheel along the entire length of the knife, resulting in high sharpening accuracy and repeatability. The integrated liquid cooling system effectively dissipates heat generated during grinding. This protects the cutting edge from overheating while helping the knife maintain its correct geometry and material properties. One of the key features of the TSC710 is its efficient cooling system. During operation, the coolant limits the heating of the cutting edge, which is particularly important when sharpening knives made of tool steel and HSS. Cooling helps achieve a high-quality ground surface, extend knife service life, and reduce the risk of material property degradation caused by excessive heat. The TSC710 can sharpen knives up to 800 mm in length, 150 mm in width, and 30 mm in thickness. Smooth height adjustment of the grinding wheel allows precise setting of the grinding parameters, while the manual feed along the linear guides gives the operator full control over the sharpening process. Standard Equipment CORMAK TSC710 knife sharpener Grinding wheel Integrated cooling system Coolant tray Clamping blocks for simultaneous sharpening of multiple knives Clamping components Operating manual Technical Specifications Specification Value Motor power 1.1 kW Power supply 230 V Maximum knife sharpening length 800 mm Maximum knife width 150 mm Maximum knife thickness 30 mm Spindle speed 2,800 rpm Grinding wheel diameter 100 mm Grinding wheel height 51 mm Grinding wheel thickness 13 mm Cooling system Yes Feed type Manual, on linear guides Simultaneous knife sharpening Yes, up to 4 knives Machine dimensions 1170 × 465 × 610 mm Weight 65 kg

Condition: new, Year of construction: 2026, CORMAK 500 x 1000 (CJ6250Cx1000) Universal Lathe The CORMAK 500 x 1000 is a robust and precise conventional metal lathe designed for professional machining in industrial plants, tool rooms, and repair workshops. Thanks to its high bed rigidity, modern drive system, and versatile equipment, the machine ensures reliable and repeatable operation for both single-item and batch production. Key Advantages of the Machine Induction-hardened bed, resistant to torsion and vibrations – guarantees machining accuracy. Removable bridge section allows for machining parts up to 630 mm in diameter. Modern spindle bearing system with ball bearings ensures stable operation at high speeds. Precise speed and feed control – full control over process parameters. Rapid longitudinal and cross feeds – for faster operations. Digital readout for 3 axes – simplifies dimensional control and shortens setup time. Wide threading capabilities – metric, imperial, modular, and D.P. threads. Main motor 5.5 kW – high power for demanding material machining. Standard Equipment 3-axis digital readout 3-jaw self-centering chuck, Ø 250 mm Fixed steady rest Travelling steady rest Spindle reduction sleeve Foot-operated emergency brake Full-length chip guard Coolant system 24V halogen work light Threading dial indicator Tool kit CE Declaration of Conformity User manual Brand-new machine with warranty Technical Specifications Parameter Value Swing over bed 500 mm Swing over cross slide 325 mm Swing in gap 630 mm Turning length in gap 260 mm Maximum turning length 1000 mm Bed type Induction-hardened Bed width 330 mm Chuck diameter 250 mm Spindle bore 80 mm Spindle nose D1-8 CAMLOCK Spindle speed range 24–1600 rpm Max tool size 25 x 25 mm Longitudinal feed range 0.072–4.038 mm/rev Cross feed range 0.036–2.019 mm/rev Cross slide travel 305 mm Compound slide travel 130 mm Metric threads 1–192 mm Inch threads 0.5–28 TPI Bedpfx Aqjxd Upxswsll Module threads 1–56 mm D.P. threads 8–56 D.P. Tailstock quill diameter 65 mm Tailstock quill travel 120 mm Tailstock taper MT 5 Digital readout 3-axis Main motor power 5.5 kW Coolant pump power 0.1 kW Machine weight 1700 kg

Condition: new, Year of construction: 2026, CORMAK MM2315 400V Wood Edge Sander The CORMAK MM2315 400V is a professional oscillating edge sander designed for intensive use in woodworking shops and manufacturing facilities. Equipped with a powerful motor, a precision belt tracking system, and an adjustable sanding unit, it enables efficient and accurate sanding of edges, flat surfaces, and irregularly shaped workpieces. Its compact design combined with a large working table makes it a versatile solution for professional wood processing. Key Features Oscillating sanding belt – ensures even belt wear, reduces the risk of scorching the workpiece, and extends the service life of abrasive belts. Curved workpiece sanding – made possible by the additional 300 × 250 mm auxiliary table, allowing precise guidance of irregularly shaped components. Quick belt replacement system – an intuitive lever enables fast belt changes without the need for tools. Adjustable sanding unit for vertical and horizontal operation – expands the machine's versatility and allows the sanding unit to be positioned according to production requirements. Adjustable worktable height – provides precise height adjustment within an 80 mm range, adapting the working position to different material thicknesses. Large work surface – the 840 × 300 mm main table ensures stability and comfort, even when sanding large workpieces. Bsdpfxozrvazj Aqwoll Construction and Technology The machine is built on a heavy-duty steel frame that provides excellent rigidity and vibration resistance. At its core is a 2.2 kW motor, delivering the power and performance required for efficient material removal, even during continuous operation. The 2515 × 152 mm sanding belt operates at a speed of 980 m/min, ensuring fast and consistent sanding results. The oscillating belt mechanism is one of the key advantages of this model, significantly improving surface finish quality while minimizing sanding marks. An additional 700 mm side fence supports long workpieces, providing better guidance and greater control during operation. Precision and Performance The sanding angle can be precisely adjusted from 0° to 45°, allowing both edge and end-grain sanding to meet specific production requirements. The adjustable table height and the ability to process various workpiece sizes—from thin strips to thick panels—provide excellent production flexibility. Thanks to the movable sanding unit, the operator can set the optimal working position, while the integrated Ø100 mm dust extraction port allows connection to a dust collection system, helping maintain a clean and safe working environment. Standard Equipment Height-adjustable worktable Auxiliary table for curved workpieces Adjustable sanding unit Oscillating belt system Quick belt replacement mechanism 700 mm side fence Dust extraction port Operating manual (Polish) CE Declaration of Conformity Technical Specifications Specification Value Sanding belt size 2515 × 152 mm Worktable size 840 × 300 mm Edge and end-grain sanding angle 0–45° Auxiliary table size 300 × 250 mm Table height adjustment 80 mm Side fence size 700 × 60 mm Maximum sanding length 790 mm Dust extraction port diameter 100 mm Belt speed 980 m/min Motor power 2.2 kW Power supply 400 V Weight 138 kg Warranty 12 months Operating manual Yes CE Declaration Yes