Used D&M Dry Spray Wall Spray Wall Paint Wall for sale (93,379)

Year of construction: 2020, condition: refurbished (used), Dear customers, Our experience has shown that communication via email often unnecessarily prolongs the process. We would like to help you quickly, and for this purpose, a three-minute phone call is better than exchanging emails for three days. TSWa 20.20 Dry spray wall Dimensions: 2000 x 2000 mm (W x H) Fan is mounted above the wall Nlsdpfxsfv Hiqo Adred + Fan at height Airflow: 7,200 m³/h Motor: 0.75 kW, explosion-proof (ATEX) Exhaust pipe: 500 mm diameter Depth: 900 mm The pipework should not exceed a total length of 3-4 meters. Double filtration: Paper filter + Paint stop filter mat Clamping strip (+150 EUR net) Options/surcharge for: Paint stop filter mat clamping strip: 150 EUR net Side guide plates with hinges: 590 EUR net Images may vary. We would also be happy to offer you complete spray booths with air supply system, heat exchanger, air supply ceiling, piping, etc. Simply contact us.

Year of construction: 2020, condition: refurbished (used), Dear customers, Our experience has shown that communication via email often unnecessarily prolongs the process. We would like to help you quickly, and for that, it is better to have a three-minute phone call than to exchange emails for three days. TSWi 30.20 Nlodpfxofr T Eme Adrjd Dry spray booth Dimensions: 3000 x 2000 mm W x H Fan is integrated into the wall Airflow: 10,800 m³ / h Motor: 2.20 kW, explosion-proof Exhaust pipe: 500 Ø mm Depth: 900 mm Double filtration: paper filter + Paint stop filter mat Clamping strip (+180 EUR net) Options/surcharge for: Transition from square to round: 150 EUR net Paint stop filter mat with clamping strip: 180 EUR net Side guide plates with hinges: 590 EUR net Images may vary. We would also be happy to offer you complete spray booths with supply air system, heat exchanger, supply air ceiling, piping, etc. Simply contact us.

Year of construction: 2020, condition: refurbished (used), Dear customers, Our experience has shown that communication via email often unnecessarily prolongs the process. We would like to help you quickly, and for that, it is better to spend three minutes on a phone call than to exchange emails for three days. TSWi 20.20 Dry spray wall Dimensions: 2000 x 2000 mm (W x H) Fan is installed in the wall Airflow: 7,200 m³ / h Motor: 1.50 kW, explosion-proof Exhaust pipe: 400 Ø mm Depth: 900 mm Double filtration: Paper filter + Paint stop filter mat Clamping bar (+ EUR 150.00 net) Options/additional cost for: Nodpefr T Eqefx Adrjld Transition from square to round: EUR 150.00 net Paint stop filter mat with clamping bar: EUR 150.00 net Side guide plates with hinge: EUR 590.00 net Images may vary. We would also be happy to offer you complete spray booths with a supply air system, heat exchanger, supply air ceiling, piping, etc. Simply contact us.

Condition: refurbished (used), Dear customers, Our experience has shown that communication via email often unnecessarily prolongs the process. We would like to help you quickly, and for that, it is better to spend three minutes on a phone call than to exchange emails for three days. TSWc 20.20 Dry spray wall Dimensions: 2000 x 2000 mm W x H + Fan at the top Airflow: 7,200 m³ / h Motor: 1.50 kW, explosion-proof Exhaust duct: 400 Ø mm Depth: 900 mm Double filtration: Paper filter + Paintstop filter mat Clamping bar (+150 EUR net) Options/Additional cost for: Paintstop filter mat clamping bar: 150 EUR net Side guide plates with hinges: 590 EUR net Njdpofn Ndcsfx Adrsld Images may vary. We would also be happy to offer you complete spray booths with supply air system, heat exchanger, supply air ceiling, piping, etc. Simply contact us.

Year of construction: 2020, condition: refurbished (used), Dear customers, Our experience has shown that communication via email often unnecessarily prolongs the process. We would like to help you quickly, and for that, it is better to spend three minutes on a phone call than to exchange emails for three days. TSWc 30.20 Dry spray wall Dimensions: 3000 x 2000 mm W x H + Fan at the top Airflow: 10,800 m³ / h Motor: 2.20 kW, explosion-proof Exhaust duct: 500 Ø mm Depth: 900 mm Double filtration: paper filter + Paintstop filter mat Nlodpfofn Nddjx Adred Clamping rail (+€180.00 net) Options/additional cost for: Paintstop filter mat clamping rail: €180.00 net Side guide plates with hinge: €590.00 net Images may vary. We would also be happy to offer you complete spray booths with air supply system, heat exchanger, air supply ceiling, piping, etc. Simply contact us.

Condition: ready for operation (used), Anti-spark centrifugal extractor fan Cardboard filters Nledpfx Ajw Rpxcjdrjd “Paint-Stop” filter Electric panel with IP55 protection class Ceiling light with IP65 protection class Emergency push-button Discharge hopper

Condition: new, The AL-KO COLOUR JET paint mist extractor is used to extract toxic mist in the workshop. The AL-KO COLOUR JET is therefore ideal for paint extraction in timber-processing operations, in carpenters' and joiners' workshops and in the craft sector in general. The AL-KO COLOUR JET is a fold-out paint mist extraction system. It is delivered as a plug-in paint mist extraction system. Nlsdpfjhby Risx Adrsd Motor 0,75 / 2,1 kW ex/ 400 V / 50 Hz Fan speed 960 / 1.430 RPM capacity 3.000 / 6.800 m3/h dimensions (B/ W/ T) 1.912 x 1.405 x 943 mm with attached side panels 2.971 x 1.405 x 1.215 mm filter area 2 m2 noice level 72,0 dB(A) weight 248 kg

Condition: good (used), Year of construction: 1994, Working area approx. 2,080 x 1,430 mm, side impact plates on the right and left, filter area approx. 1,800 x 1,300 mm, 2 rows of paper volume filters approx. 650 x 1,800 mm, internal fine filter G4 approx. 1,350 x 2,000 mm, air flow rate 4,500 m³/h, pressure max. 500 Pa, Nljdpfopvil Tsx Adrsd motor 1.1 kW / 1,400 rpm.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, warranty duration: 12 months, Paint/spray wall dimensions without fan and control Panel! Extraction surface - dimensions (mm): 4430(w)x1900(h) Overall dimension(mm): 4530(w)x2350(h)x810(d) Technical data: - Fan power 4.4kW (ATEX) - Fan suction capacity: 24000 m³/h (max 1200Pa) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation Nedpfx Adeia Ta Ujreld - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, Paint/spray wall dimensions without fan and control Panel! Extraction surface - dimensions (mm): 3000(w)x1900(h) Overall dimension(mm): 3100(w)x2350(h)x810(d) Technical data: - Fan power 3kW (ATEX) - Fan suction capacity: 16000 m³/h (max 1100Pa) Njdpfxeia Ta Ro Adreld - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty We can manufacture filtration supply (new air to sprayroom). Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, Paint/spray wall dimensions without fan and control Panel! Extraction surface - dimensions (mm): 3000(w)x1400(h) Overall dimension(mm): 3100(w)x1850(h)x810(d) Nlodpfx Aeia Ta Hsdred Technical data: - Fan power 3kW (ATEX) - Fan suction capacity: 16000 m³/h (max 1100Pa) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, Paint/spray wall dimensions without fan and control Panel! Extraction surface - dimensions (mm): 2190w)x2350(h) Overall dimension(mm): 2295(w)x2295(h)x810(d) Technical data: - Fan power 2.2kW (ATEX) - Fan suction capacity: 12000 m³/h (max 1100Pa) - Connection voltage: 400V Nledpfx Adoia Ta Asrsd - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1624x950x2345 mm Weight 0 kg Nsdpfxovz El Ne Adrjld Total power requirement 1,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2394x990x3115 mm Weight 0 kg Total power requirement 2,6 kw Nedpfjvz Ewfjx Adrjld

Condition: ready for operation (used), Year of construction: 1997, A misted Rippert wet separator system in stainless steel design is available for the painting process. Working width: 5000mm, exhaust air capacity: 18000m³/h, water capacity: 700l. Stainless steel chimney included. On-site inspection is possible. Njdowydgzjpfx Adrold

Condition: good (used), functionality: fully functional, Equipment: documentation/manual, Spray Dryer: - Manufacturer: Niro Atomizer - Model: MSD - Capacity: up to 1,900 kg/h water evaporation - Design: Three-stage dryer - Drying air volume: 45,000 kg/h Evaporators/High Concentrators: Nledpfx Adexgg Hborod - Manufacturer: GEA/Laguilharre - Throughput: 12,500 l/h Including big bag and sack emptying station Evaporator (Pre-concentrator) - Make: GEA - Model: RM20 - Capacity (feed): 20,000 l/h - Operating principle: MVR and TVR (hybrid)

Year of construction: 2020, condition: refurbished (used), For suction diameters from 120 to 700 mm. Please provide your volumetric flow rate, and we will select the right cyclone for you. Various designs available: - Legs made of painted square steel profiles - Cell wheel lock and transition piece with inspection flap - Inlet box with check valve - Tangential outlet with/without pressure relief area - Square outlet with/without pressure relief area - Sound insulation Of course, you can also purchase all accessories from us, such as fans, suction pipes, deflector hoods, etc. Mode of operation: The contaminated air is introduced tangentially into the cylindrical upper part, causing the air to rotate. The material is forced outwards towards the circumference of the cyclone under the influence of centrifugal force and is discharged through the hole in the bottom. The cleaned air leaves the cyclone through the centrally located outlet pipe at the top. The separation efficiency increases with the feed rate, but so does the pressure loss and, consequently, the energy consumption. Therefore, it is important to find a good compromise. We have developed a range of cyclones that are optimized for filtering large quantities of material. They are therefore very well suited for the wood/paper/recycling/grain and feed industry. Nljdpfx Adsftb Ebsred Below, you can select the cyclone with the appropriate size based on the air volume and a typical pressure drop in the range of 1000 Pa. Operating pressure +/- 5000 Pa

Year of construction: 2020, condition: refurbished (used), Paint booth on wheels Ready for connection, 230 V Motor power: 1.1 kW Airflow rate: 2,500 m³/h Nlsdpfxsfuhu Aj Adred Dimensions: 1200 x 1200 mm (W x H) Hose connection at the rear underside: 250 mm Double filtration system: paper filter and paint stop filter mat Spray booth, paint booth, paint mist extraction, dry spray wall, spray wall, paint wall.

Condition: ready for operation (used), HM-D 539 production optimization Njdjzixpgepfx Adrsld maximum disc diameter: 550 mm minimum disc diameter: 500 mm Disc saw diameter on the spindle: 30 mm voltage: 400V power: 10 kW loading CE marking year: 2006

Condition: like new (used), Year of construction: 2009, operating hours: 467 h, functionality: fully functional, Plow and play. Very low-hours, fully equipped mobile dry ice production plant: Total operating time for the pelletizer is 467 hours. The last full service was performed in 2026. Pelletizer * Mobile, containerized manufacturing system * "Production HUB with Triventek PE80 pelletizer, 80 kg/h" (Denmark), built into a portable container with lighting. * ISO CO2 tank, 8 m3, portable on a frame, manufacturer: Wessington Cryogenics Ltd, England. * 3 pieces of thermo containers, 200 kg capacity each. New price: €250,000 * All manufactured in 2009, but very little used. Mobile & Modular: Built directly into a 10-foot High Cube ISO shipping container, it can be easily transported to rugged or remote locations. Nsdpfx Aey R I Tmjdrold Worldwide shipping. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Timber drying 3 chamber ensemble (fully functioning, used). Nodozg Iw Ijpfx Adreld Parameters: - length: 12,9 m - width: 8,8 m - total height: 5,2 m / usable height: 4,1 m Hot water 90°C More technical details available on demand. On site inspection and testing are possible.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, cooling capacity: 680 kW (924.54 HP), Equipment: cooling unit, condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture:2004 Nominal power 680.4 /579.2 kw Refrigerant:R404 Refrigerant content:218.9+25 liters Flow rate: Temperature range: -50°C- +100°C Max pressure: Operating pressure: 28bar/-1bar Nedpfjvllxdex Adrold (performance depends on usage parameters) Number of fans: 5 pcs, diameter 900 mm, Air flow:162500 /131000 m3/h Motor power consumption:17.60/11.50 Kw Heat exchanger aream2 Operating noise 52 dB Length: mm Height: mm Width: mm Weight: ca kg The radiator has been technically inspected, fully functional

Condition: new, functionality: fully functional, Year of construction: 2026, Dry and Wet Ball Mill: Structure, Operation, and Technical Details A ball mill is a fundamental grinding device used in mineral processing, cement manufacturing, chemical production, and other industrial applications. It works by rotating a cylindrical shell filled with grinding media—usually steel balls—causing impact and friction that reduce materials to fine powder. Based on the grinding environment, ball mills are classified into dry and wet types, each suited for specific materials and process requirements. Working Principle Both dry and wet ball mills operate on the same mechanical principle. The rotating cylinder, driven by a motor through a gear system, lifts the grinding media and material along the inner wall. As the rotation continues, the balls fall under gravity, striking and grinding the material. The difference lies in the presence or absence of a liquid medium during grinding. Dry Ball Mill A dry ball mill is used when the material must remain moisture-free or when water could affect product quality. It is commonly applied in cement clinker, limestone, quartz, and refractory material grinding. The discharge can be either grate type or overflow type, depending on the desired fineness. Technical Features: Feeding size: ≤25 mm Discharge size: 0.075–0.4 mm Capacity: 0.65–90 t/h Liner material: High manganese steel or wear-resistant alloy Drive system: Gear-driven or direct-coupled motor Dust control: Equipped with air exhaust and dust collector Advantages: Suitable for materials sensitive to moisture No drying process required after grinding Lower corrosion risk and simpler maintenance Easier material classification and separation Limitations: Dry grinding produces more dust and heat, requiring efficient ventilation and dust collection systems. Wet Ball Mill A wet ball mill operates with water or another liquid medium added to the material. The slurry formed during grinding improves efficiency by reducing friction and preventing excessive heat buildup. It is widely used in ore beneficiation, ceramics, and chemical industries. Nlodpfsq Nx Alex Adred Technical Features: Feeding size: ≤25 mm Discharge size: 0.074–0.2 mm Capacity: 0.65–615 t/h Liner material: Rubber or high-chromium steel Discharge method: Overflow or grate type Auxiliary equipment: Classifier, pump, and thickener for slurry circulation Advantages: Higher grinding efficiency and finer particle size Reduced dust and noise levels Continuous operation suitable for beneficiation circuits Better control of particle uniformity Limitations: Requires drying if the final product must be in powder form and involves more complex slurry handling. The selection between dry and wet grinding depends on the material characteristics, downstream process, and environmental conditions. Dry mills are preferred for materials that must stay moisture-free, while wet mills are ideal for fine grinding and slurry-based processes. Conclusion Dry and wet ball mills share the same mechanical structure but differ in their grinding environment and application scope. The dry type offers simplicity and low maintenance for moisture-sensitive materials, while the wet type provides higher efficiency and finer output for mineral and chemical processing. Understanding their technical parameters and operational differences ensures optimal equipment selection, improved productivity, and reliable performance in industrial grinding operations.

Condition: used, Polymer Recovery, Dremel Style plastic washer and spin dryer vibratory screener, gas blower system, sink float tank and feed hopper with augers, feed hopper will need to be removed from I-beam frame, unit is bolted and welded to frame (does not include lower I-beam frame), includes all control panels, winning bidder responsible for proper disconnection and removal of machine. Nedpfx Adoxd D I Rjreld

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2012, loading space length: 13,620 mm, loading space width: 2,470 mm, loading space height: 2,910 mm, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 435 / 50 / R19.5, wheelbase: 8,940 mm, color: white, Year of construction: 2012, General information Model code: ## Axle configuration Tyre size: 435 / 50 / R19.5 Make axles: BPW EcoPlus Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 25%; Tyre profile right: 25% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 25%; Tyre profile right: 25% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 25%; Tyre profile right: 25% Weights Empty weight: 7.550 kg Carrying capacity: 33.450 kg GVW: 41.000 kg Nodoznu N Hspfx Adrold History Number of owners: 1 Condition General condition: average Technical condition: average Visual appearance: average Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL