Used Dcm Leopard Lma for sale (1,483)

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). Bdedoyx Uy Ajpfx Afweg • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: good (used), Year of construction: 2014, functionality: fully functional, Technical Data Material: Printed or unprinted shrink films Film types: PVC, PET, OPS shrink film Film thickness: approx. 28–100 µm Minimum sleeve width: approx. 50 mm Maximum sleeve width: approx. 300 mm Maximum unwind diameter: approx. 600 mm Maximum rewind diameter: approx. 600 mm Sleeve width tolerance: approx. +/- 0.15 mm Outer web overlap: approx. 0–1 mm Glue position: Adjustable Maximum production speed: Up to 500 m/min Maximum sleeve roll weight: approx. 50 kg standard Power supply: 240 V / 50 Hz Compressed air: Minimum 6 bar, dry and oil-free, approx. 40 litres/min Bdjdpfx Aozka T Asfwog _____ Machine Configuration Based on available information, the machine is equipped with the following main units: Unwinding Section • Unwinding unit • Cantilevered unwind shaft • Pneumatic arm for supporting the master roll • Core adapter for 76 mm core diameter • Core adapter for 152 mm core diameter • Electromagnetic brake controlled by an ultrasonic sensor • Automatic web guiding with ultrasonic sensor Gluing / Solvent Application • Solvent application unit for gluing • Pressurized solvent tank • Speed-dependent glue quantity control • Adjustable glue seam position Sleeve Forming Section • Longitudinal pre-cutting / perforation unit with two perforation wheels • Semi-automatic forming tool for sleeve widths from approx. 50 to 300 mm • Adjustable guide rollers for sleeve forming • Roller sets for laying the film around the forming bar • DCM control system for sleeve width measurement Rewinding Section • Rewinding unit • Machine control cabinet • Touchscreen control

Condition: excellent (used), Year of construction: 2023, Max. master reel width: 1000 - 1400 - 1600mm Max. master reel weight: Up to 3000kg Max. master reel diameter: 1000 to 1800mm Minimum standard slit: 20mm (other sizes on request) Rewinding reel maximum diameter: 610mm Maximum production speed: 1000m/min Bodpfxjzhwgbe Afwsdg Separated shaftless unwinder Automatic positioning of the web guide camera Razor blades/circular knives/pneumatic knives with automatic slit positioning ASP Automatic tape applicator Linear lay-on rollers 4 differential or pneumatic shafts, mounted on two turrets with automatic reel change Automatic slit reel unloading and positioning Automatic core positioning 6 motors Automatic web tension control through loading cells APPLICATIONS: Bags, Food packaging, Outer packing, Soft drinks/mineral waters labelling, Aluminum covers for pharmaceuticals MATERIALS: PE, Aluminium, Papers, Laminates

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 362 mm, travel distance Z-axis: 2,155 mm, controller manufacturer: FANUC, controller model: 18-T, number of axes: 2, Horizontal turning machine manufactured in 1998. This DAEWOO Puma 350 LMA features a turning length of 2000 mm and a chuck diameter of 320 mm. It is equipped with a live tool and includes a steady rest. If you are looking to get high-quality turning capabilities, consider the DAEWOO Puma 350 LMA machine we have for sale. Contact us for further details. • Turning length: 2000 mm • Chuck size: 320 mm Additional equipment • Steady rest included Technical Specification Bedezx Tfujpfx Afwodg Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Simens 6RA8025-6GS22-0AA0 SINAMICS DCM DC-Converter SN: Q6H22450101, used, good condition, 100% functional, scope of delivery as per photos Bdsdozu E N Repfx Afwog

Condition: used, Electric chain hoist crane DEMAG, type DCM PRO -125 1/1 H2.8 V8/2, Manulift Year of manufacture: 2004 Load capacity: 125 kg Bodpfxjzugnus Afwodg Hook travel: 2.8 meters Lifting speed: 8 m/min Fine lifting speed: 2 m/min Distance from suspension to load hook: 630 mm Power supply: 400 volts, 50 Hz 1 load chain = 125 kg Manulift hand control directly on the crane hook Weight: 21 kg Good condition

Condition: used, Year of construction: 1982, machine/vehicle number: 82/MA/7, functionality: fully functional, cutting height (max.): 180 mm, cutting width (max.): 350 mm, saw blade diameter: 350 mm, saw blade bore: 80 mm, Equipment: documentation/manual, Year of manufacture 1986 Fully functional Bdodezhh Uvopfx Afweg Cutting height (max.) 180 mm Cutting width (max.) 350 mm Saw blade diameter 350 mm Saw blade bore 80 mm Disc diameter 350 mm Description A.COSTA LEOPARD / S Cutting width: 350 mm Cutting height: 180 mm Main motors: 2 x 55 kW Feed motor: 5.5 kW Height adjustment motor: 0.37 kW Total power: 0.37 kW Max. disc diameter: 350 mm Spindle diameter: 2 x 80 mm Sleeve diameter: 2 x 100 mm Minimum element length: 800 mm Electric feed adjustment Automatic central lubrication Electric height adjustment Adjustment Electric disc height adjustment Six upper pressure rollers Pneumatic clamps Anti-ejection latches Weight: ± 6.000 kg Spare sleeves, spacers, saw blades Total length: 400 cm Number of rollers: 2 straight, 14 angled. TOTAL: 16 lower rollers + 2 upper rollers Pneumatic clamping of upper rollers

Condition: used, functionality: fully functional, type of input current: three-phase, cutting height (max.): 170 mm, cutting width (max.): 380 mm, working height: 170 mm, – Italian manufacture TECHNICAL SPECIFICATIONS: – cutting width: 380 mm – cutting height: 170 mm – motors: 2 x 55 kW – feed motor: 3 kW – height adjustment motor: 1.1 kW – max. blade diameter: 350 mm – spindle diameter: 2 x 60 mm Bdedpfxjw H R R Hs Afweg – sleeve diameter: 2 x 80 mm – track width: 350 mm – total power: 114.1 kW – feed speed adjustment via frequency inverter – automatic central lubrication – minimum workpiece length: 800 mm – electric height adjustment – shaft height adjustment – six top pressure rollers – pneumatic hold-downs – five anti-kickback devices – powered lower outfeed roller – connector diameter: 2 x 200 mm – spindle speed: 4500 RPM – machine dimensions (L/W/H): 300 / 220 / 190 cm – weight: approx. 5000 kg

Condition: used, machine/vehicle number: 152.00.80.20, Universal machining center, CNC tool milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine Bedpfx Ajfbma Nofwodg -function tested -Clamping table: 800 x 445 mm -Travel: X/Y/Z 500/500/385 mm -Spindle holder: SK40 -quill stroke: 90 mm -Speeds from: 31.5 to 3150 rpm -Coolant device -Dimensions: 1475/1770/H2000 mm -Weight: 1966 kg

Condition: used, Year of construction: 1985, x-travel 500 mm y-travel 500 mm z-travel 350 mm table surface area 800 x 450 mm spindle taper: ISO 40 quill stroke mm feed - longitudinal/cross mm/min feeds vertical mm/min turning speed range max. 3150 U/min voltage 380 V / 50 Hz power capacity 4 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 2,5 x 2,3 x 2,0 m • HEIDENHAIN TNC 155 - control, Bdjdpfx Aotv Ia Tsfweg • with electrical hand wheel, • several tool tapers, • new set of bevel gears,

Condition: good (used), Year of construction: 2012, DEMAG crane chain hoist DCM-Pro 2 80 1/1 H2.8 V16/4 80 kg with crane canopy (2x3m) The DCM-Pro manulift was developed for safe and fast load handling with one-hand operation. The DCM-Pro is based on the lifting unit of the DC-Pro chain hoist and the DSM-C control unit. Due to the control unit being rigidly connected to the load handling attachment, the operator only needs one hand to operate the chain hoist as well as to guide the load. Manufacturer: DEMAG Type: Crane chain hoist Bdedpfxohwd E Ns Afwsg Model: DCM-Pro 2 80 1/1 H2.8 V16/4 Load capacity: 80 kg Control: GSA Type 4 Movement radius: sideways 3 metres and forwards/backwards 2 metres Steel beam: included in the offer Condition: used  Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, Year of construction: 1986, functionality: fully functional, cutting height (max.): 180 mm, cutting width (max.): 350 mm, saw blade diameter: 350 mm, saw blade bore: 80 mm, disc diameter: 350 mm, A.COSTA LEOPARD /2/75 Cutting width: 350 mm Cutting height: 180 mm Main motors: 2 x 55 kW Feed motor: 5.5 kW Height adjustment motor: 0.37 kW Total power: 0.37 kW Maximum disc diameter: 350 mm Spindle diameter: 2 x 80 mm Sleeve diameter: 2 x 100 mm Minimum element length: 800 mm Electric feed adjustment Automatic central lubrication Electric height adjustment Electric disc height adjustment Six upper pressure rollers Pneumatic clamps Anti-expel latches Weight: ± 5,500 kg 2 spare sleeves and spacers Infeed table: Infeed table connected to the main machine. Total length: 400 cm Number of rollers: 2 straight, 14 inclined. TOTAL: 16 lower rollers + 2 upper rollers Bodpfx Afowi I Hkswjdg Upper rollers with pneumatic pressure

Condition: used, Year of construction: 2022, - Brand : Comet - Type: Leopard 25 - Year of construction: 2025 - Weight: 4070 kg. - Hours : 652 hours - Drive: Petrol + 220 volts Bodpfx Afewhqifswodg - Working height: 25.5 meters - Lateral reach: 11.5 meters - Lifting capacity: 200 kg. - Remote control - Adjustable tracks - Rotatable work tray - New safety inspection - Aerial work platform book available - CE document available - Video on our website - Trade-in and transport possible * Brand: Comet *Type: Leopard 25 * Construction year: 2025 * Weight: 4070 kg. * Hours: 652 hours * Drive: Petrol + 220 volts * Working height: 25.5 meters * Lateral reach: 11.5 meters * Lifting capacity: 200 kg.

Condition: used, cutting height (max.): 200 mm, cutting width (max.): 380 mm, saw blade diameter: 350 mm, total length: 3,000 mm, total width: 2,200 mm, total height: 1,900 mm, overall weight: 5,000 kg, A. COSTA LEOPARD double-shaft wide belt sander, 2x75kW (100hp) Bdsdpfx Afoy Rzygowsg

Condition: used, engines - 55 and 55 kW feed motor - 7.5 kW height adjustment motor - 1.1 kW cutting height - 200 mm cutting width - 350 mm Bodpfx Aswrw D Refwjdg blade saw diameter max.- 300 mm spindle diameter - 2 x 60 mm sleeve diameter - 2 x 70 mm track width - 350 mm total power - 119 kW electric feed regulation automatic central lubrication minimum length of the element - 600 mm electric height adjustment shaft height adjustment six upper pressure rollers pneumatic clamps five anti-ejection pawls ruler stub diameter - 220 mm spindle speed - 4500 RPM dimensions of the machine (length / width / height) - 275 / 235 / 210 cm weight - ~ 7000 kg Feeders: max. cutting length - 1850 mm min. cutting length - 800 mm max. material length - 2500 mm min. material length - 600 mm max. material width - 700 mm max. material height - 200 mm roll width - 700 mm roll diameter - 130 mm number of rolls - 26 3 smooth pressure rollers 4 toothed pulling rollers feed adjustable on the inverter 0-70 m/min. central lubrication of saw guides power of the saw motor - 2 x 9.2 kW feed motor power - 1.5 kW power of the disc spreading motor - 3 kW chain motor power - 1.1 kW dimensions (length / width / height) - 7050 / 2100 / 1850 mm

Condition: used, A.COSTA LEOPARD multirip saw with double arbor Bodpfx Afsvf Dagowedg - Max cutting depth: 200 mm - Width of track: 350 mm - 2 x 55 KW / 75 HP - Weight: around 5 tons

Condition: excellent (used), Year of construction: 2016, Kliper DCM 90, lightly used, fully operational. We speak English, German, and ex-Yugoslav languages. Contact also possible via WhatsApp. Bedpfx Aoykrxlsfwsdg

Condition: used, Year of construction: 1990, functionality: fully functional, Updated Electrics Scrap Conveyor 2 Plane Straightener Bdedpjzt S Uwofx Afwog Multi Checker Unit

Condition: used, Year of construction: 1996, functionality: fully functional, 5/16" National Machinery Formax Model FX22M Two Die Two Blow Progressive Header Bdjdpfxezt S T He Afwog

Condition: used, National FXTC Combined Pointer + Thread Roller Bdsdozxqidopfx Afwjg Year: 80's Capacity (mm): M8x80/100 Thread Die dimensions (mm): 115/130x80 Parts/min (max): 300

Condition: good (used), Rebuilt by Doornbos 2020 with new Volvo engine, 750bar 80 liter/min, WOMA pump and Hammelmann ES2 control Bedpfjvpl Hcex Afwodg

Condition: good (used), machine/vehicle number: 2832, Year of construction: 2023, load capacity: 25,000 kg, lifting height: 3,920 mm, mast type: duplex, fork carriage width: 250 mm, fork length: 2,400 mm, total length: 7,005 mm, total width: 3,000 mm, operation weight: 33,800 kg, additional equipment features: Rear mud guards, Front mud guards, Equipment: lighting, Kalmar DCG250-12 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Bodpjyuhv Ujfx Afwodg Wheel size – Drive wheel: 180-250 Wheel size – Steering wheel: 180-250

Condition: good (used), machine/vehicle number: 2249, Year of construction: 1989, load capacity: 32,000 kg, lifting height: 6,500 mm, mast type: duplex, fork carriage width: 300 mm, fork length: 2,500 mm, total length: 6,800 mm, total width: 3,400 mm, operation weight: 42,800 kg, additional equipment features: Centralized greasing system, Weight system, Kalmar DCB32-1200 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 16.00x25 Bsdsyuhlpopfx Afwjdg Wheel size – Steering wheel: 16.00x25

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: TET902P3-20-phase cut-off - 2200387390, cooling capacity: 178 kW (242.01 HP), type of input current: three-phase, type of cooling: water, overall weight: 2,907 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 30.4 m³/h, pump pressure: 3.16 bar, total width: 1,250 mm, total length: 4,655 mm, total height: 2,151 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Offers exclusively to companies with a German billing address! Process chiller/refrigeration unit/chilled water unit, air-cooled, Type: TAEevo Tech 902 P3-20 phase cut-off MTA S.p.A. TAEevo Tech 902 P3-20 are air-cooled, compact water chillers suitable for outdoor installation (from -20°C to +46°C). Includes crankcase heater, phase monitoring, buffer tank 950 liters, and integrated P3 circulation pump and winter control (-20°C). Chilled water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 178 Chilled water temperature outlet/inlet (°C): 7 / 12 Flow rate (m³/h) 30.4 Available pump pressure (bar) 3.16 Ambient temperature (°C) 32 Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phases Ph 3, Max. power consumption (kW) 90 Max. current (A) 160 Starting current circuit (A) 365 Protection class: IP54 Dimensions: Length (mm) 4655, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2907 Connection Rp 3" Serial number: 2200387390 Year of manufacture: 2022 Condition: Optically 1, Technically ok (Warehouse stock, as new) Price: upon request (Subject to technical changes and prior sale!) Bsdpfxow H R Nco Afwedg Location: MTA Deutschland GmbH, 41334 Nettetal

Year of construction: 2006, condition: used, The Ulma PV 350 flowpack machine is designed for packaging loose, difficult-to-handle, delicate, and wet products. It can be used for, among other things, leeks, carrots, fennel, celery, radishes, pak choi, peppers, Chinese cabbage, and even anthuriums. Top sealer Automatic product length sensor Suitable for transparent/unprinted film Double film roll holder, up to a maximum width of 1000 mm Pneumatic opening of the sealing rollers Digitally adjustable sealing temperature Self-centering, adjustable folding unit Electronic speed control Temperature control for sealing bar and sealing rollers Infeed belt on the right side Built in accordance with European directives / CE marking Capacity up to a maximum of 50 pieces per minute, depending on the product. Digital (English) manual available. Upon request, this can be sent to you. Product dimensions Ulma PV 350: Length: Min. 60 mm – up to infinity, using a length indication photocell. Bjdpfx Ajzxi A Ajfwsdg Width: Min. 10 mm – Max. 250 mm Height: Min. 10 mm – Max. 235 mm Note: 2 units available.