Used Demag Electric Tugger Train With Trolley for sale (30,741)

Condition: used, Demag PK 10 N electric chain hoist with electric trolley complete Redpfx Aervkanommou

Condition: used, Electric Tow Tractor, Tugger Train Tractor STILL E-Tugger STILL Type R06 3-wheel tow tractor, electric tow machine Serial no. W4X126A00120 Year of manufacture: 2010 Towing capacity: max. 6000 kg Payload: 150 kg Front axle load: 420 kg Rear axle load: 600 kg Rsdjv Uramjpfx Ammeu Drive power: 3.2 kW / 60 min Battery voltage: 24 volts - 3-wheel tow tractor - Without towing coupling, mounting plate with Ø 14 mm holes, hole spacing 65 / 75 x 120 mm - Lighting system - 24-volt socket at rear - Equipped with 4 used traction batteries – functional – batteries, however, in poor condition - 3-wheel solid rubber tyres 4.00-8 / (3.00) Transport dimensions L x W x H: 1700 x 1000 x 1350 mm Unladen weight: 584 kg Battery weight: 467 kg (original battery defective) Four traction batteries provisionally installed – weight approx. 180 kg Total weight: approx. 770 kg In good condition

Condition: used, Route trolley with 4 pieces Liftrunner- Route trolley STILL transport trolley, platform trolley Device type: Liftrunner Device designation: E-frame Unit number: 5T 0501 A 00046 Load capacity: max. 600 kg inner frame size: 1980 x 1050 mm Platform size to center brace: 890 x 1050 mm platform height bottom: ca.220 mm Platform height top: approx. 260 mm Total length per trolley without drawbar: 2250 mm Total width: 1170 mm Total height: 260 mm (frame height without superstructures) - Route train consisting of 4 pieces Liftrunner route trolleys - each trolley has 2 platforms of approx. 890 x 1050 mm - 2 pieces hydraulic quick couplers per trolley - 2 single-acting hydraulic cylinders above the axle for lifting the superstructure Rjdpemxrv Sjfx Ammju - Vulkollan wheels Ø 140 x 55 mm - same track from the first to the last trolley through central axle - hydraulic lifting device, WITHOUT hydraulic power unit (hydraulic supply from towing vehicle) - without hydraulic hoses - without drawbar - Former use with half pallet roller (not included) Weight per trolley: 325 kg Transport dimensions in transport rack L x W x H: 2250 x 1200 x 1350 mm Complete weight 4 trolleys with stanchion frame: 1400 kg

Condition: good (used), Year of construction: 2007, Ref. no.: 18615 Manufacturer: DEMAG Type: IntElect 80/370-100 NC4 All Electric Year of construction: 2007 Clamping unit Clamping force: 80 ton Opening stroke: 340 mm Distance between tie bars: 370 x 370 mm Mould height min.: 150 mm Injection unit Screw diameter: 25 mm Injection volume: 51 cm³ Shot weight: 45 g Injection pressure: 2000 bar Measurements and weight Dimensions: 4,3 x 1,3 x 2,3 m Machine weight: 4750 kg Further information: A Technology That Stands Out in Energy Efficiency: Less Energy, Higher Precision The Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElect's servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramatically reducing annual operating costs. Motor System — Siemens MOTICS 3 Main Drive Motor · Water-Cooled Servo Motor The main drive unit that controls all clamping and injection movements with high precision. Plasticising Motor · Water-Cooled Servo Motor Based on the same Siemens MOTICS 3 platform, this motor melts material homogeneously through precise speed and torque control; its water-cooled design ensures stable operation during long-term intensive production. 5-Axis Full Servo Control The machine is equipped with 5 independent servo motors. Clamping, injection, screw retraction, ejector and plasticising axes all operate under full servo control. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times and minimum mechanical loss compared to hydraulic systems. NC4 Control System The keyboard-based NC4 system manages all machine parameters — including injection profile, mould protection and cycle analysis — from a single screen. Rodsza Dc Ujpfx Ammeu

Condition: good (used), Year of construction: 2007, Ref. no.: 18616 Manufacturer: DEMAG Type: IntElect 80/370-100 NC4 All Electric Year of construction: 2007 Clamping unit Clamping force: 80 ton Opening stroke: 340 mm Distance between tie bars: 370 x 370 mm Mould height min.: 150 mm Injection unit Screw diameter: 25 mm Injection volume: 51 cm³ Shot weight: 45 g Injection pressure: 2000 bar Redpfx Aszabkvsmmeu Measurements and weight Dimensions: 4,3 x 1,3 x 2,3 m Machine weight: 4750 kg Further information: A Technology That Stands Out in Energy Efficiency: Less Energy, Higher Precision The Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElect's servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramatically reducing annual operating costs. Motor System — Siemens MOTICS 3 Main Drive Motor · Water-Cooled Servo Motor The main drive unit that controls all clamping and injection movements with high precision. Plasticising Motor · Water-Cooled Servo Motor Based on the same Siemens MOTICS 3 platform, this motor melts material homogeneously through precise speed and torque control; its water-cooled design ensures stable operation during long-term intensive production. 5-Axis Full Servo Control The machine is equipped with 5 independent servo motors. Clamping, injection, screw retraction, ejector and plasticising axes all operate under full servo control. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times and minimum mechanical loss compared to hydraulic systems. NC4 Control System The keyboard-based NC4 system manages all machine parameters — including injection profile, mould protection and cycle analysis — from a single screen.

Condition: good (used), Year of construction: 2008, Ref. no.: 18622 Manufacturer: DEMAG Type: IntElect 100/470-180 NC5 All Electric Year of construction: 2008 Clamping unit Clamping force: 100 ton Opening stroke: 380 mm Distance between tie bars: 470 x 420 mm Mould height min.: 200 mm Mould height max.: 430 mm Platen size (h x v): 690 x 620 mm Injection unit Screw diameter: 35 mm Injection volume: 115 cm³ Shot weight: 103 g Injection pressure: 1600 bar Measurements and weight Dimensions: 4,8 x 1,4 x 2,2 m Machine weight: 5500 kg Additional information & extras Core pull: 1 pcs Further information: The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes. All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability. The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs. The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials. Key advantages of the IntElect series: * All-electric direct-drive servo technology * Extremely low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment Rjdpjy Ub D Tjfx Ammou * Ideal solution for technical and precision plastic parts * Suitable for high-speed serial production The Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency. The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.

Condition: good (used), Year of construction: 2008, Ref. no.: 18621 Manufacturer: DEMAG Type: IntElect 100/470-180 NC5 All Electric Year of construction: 2008 Clamping unit Clamping force: 100 ton Opening stroke: 380 mm Distance between tie bars: 470 x 420 mm Mould height min.: 200 mm Mould height max.: 430 mm Platen size (h x v): 690 x 620 mm Redpfx Amsy Ub D Hemou Injection unit Screw diameter: 35 mm Injection volume: 115 cm³ Shot weight: 103 g Injection pressure: 1600 bar Measurements and weight Dimensions: 4,8 x 1,4 x 2,2 m Machine weight: 5500 kg Further information: The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes. All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability. The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs. The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials. Key advantages of the IntElect series: * All-electric direct-drive servo technology * Extremely low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision plastic parts * Suitable for high-speed serial production The Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency. The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.

Condition: good (used), Year of construction: 2008, Ref. no.: 18619 Manufacturer: DEMAG Type: IntElect 100/470-180 NC5 All Electric Year of construction: 2008 Clamping unit Redpey Ub Dtsfx Ammju Clamping force: 100 ton Opening stroke: 380 mm Distance between tie bars: 470 x 420 mm Mould height min.: 200 mm Mould height max.: 430 mm Platen size (h x v): 690 x 620 mm Injection unit Screw diameter: 30 mm Injection volume: 85 cm³ Shot weight: 76 g Injection pressure: 2180 bar Measurements and weight Dimensions: 4,8 x 1,4 x 2,2 m Machine weight: 5500 kg Further information: Die Sumitomo (SHI) Demag IntElect Serie gehört zu den hochpräzisen vollelektrischen Spritzgießmaschinen, die speziell für technische Kunststoffteile, Automobilanwendungen, elektronische Komponenten sowie anspruchsvolle Serienproduktionen entwickelt wurden. Alle Hauptbewegungen der Maschine werden über Direct-Drive Servo-Elektromotoren angetrieben. Einspritzen, Dosieren, Werkzeugbewegungen sowie Auswerferfunktionen erfolgen vollständig elektrisch und ermöglichen dadurch höchste Präzision, ausgezeichnete Wiederholgenauigkeit und maximale Prozessstabilität. Die IntElect Serie ist besonders bekannt für ihren niedrigen Energieverbrauch und ihre hohe Produktionspräzision. Im Vergleich zu konventionellen hydraulischen Spritzgießmaschinen können – abhängig von der Anwendung – Energieeinsparungen von ca. 60 % bis zu 80 % erzielt werden. Gleichzeitig reduziert die geringe Wärmeentwicklung den Kühlbedarf und senkt die gesamten Betriebskosten. Die Maschine verfügt über ein direktes Servo-Einspritz- und Dosiersystem, das sehr schnelle Reaktionszeiten und eine hochpräzise Einspritzsteuerung ermöglicht. Die Spritzeinheit ist mit 4 Heizzonen ausgestattet und sorgt dadurch für eine homogene Plastifizierung sowie stabile Prozessbedingungen, insbesondere bei technischen Kunststoffen. Die wichtigsten Vorteile der IntElect Serie: * Vollelektrische Direct-Drive Servo-Technologie * Sehr geringer Energieverbrauch * Hohe Präzision und Prozesswiederholgenauigkeit * Geräuscharmer und vibrationsarmer Betrieb * Hohe dynamische Servo-Performance * Geringer Wartungsaufwand * Saubere Produktionsumgebung * Ideale Lösung für technische und Präzisionsteile * Geeignet für schnelle Serienproduktionen Die Sumitomo Demag IntElect Serie zählt aufgrund ihrer langen Lebensdauer, stabilen Produktionsleistung und hohen Energieeffizienz auch heute noch zu den gefragtesten vollelektrischen Spritzgießmaschinen am Markt.

Condition: good (used), Year of construction: 2012, Ref. no.: 18610 Manufacturer: DEMAG Type: IntElect 160/520-340 NC5 All Electric Year of construction: 2012 Clamping unit Clamping force: 160 ton Opening stroke: 495 mm Distance between tie bars: 520 x 520 mm Mould height min.: 275 mm Mould height max.: 585 mm Platen size (h x v): 760 x 785 mm Injection unit Screw diameter: 35 mm Injection volume: 156 cm³ Shot weight: 139 g Injection pressure: 2180 bar Rsdpey Ub Dmefx Ammju Measurements and weight Dimensions: 5,4 x 1,5 x 2,1 m Machine weight: 7600 kg Further information: The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes. All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability. The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs. The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials. Key advantages of the IntElect series: * All-electric direct-drive servo technology * Extremely low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision plastic parts * Suitable for high-speed serial production The Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency. The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.

Condition: not inspected (used), functionality: unexamined, total length: 750 mm, total width: 400 mm, total height: 1,000 mm, overall weight: 150 kg, No minimum price – guaranteed sale to the highest bidder! Bidding obligates timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Auction of a workshop trolley with the following contents: Various twist drills Redpfx Asy D Nufommju Milling cutters Hand tools Files MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 750 x 400 x 1,000 mm Weight: 150 kg External reference: 16

Condition: excellent (used), Year of construction: 2001, operating hours: 70,180 h, clamping force: 800 kN, screw diameter: 40 mm, injection pressure: 1,830 bar, injection weight: 205 g, Demag Ergotech Viva 800-400 (144) Description without hopper General information Product Code: 144 Availability: In Stock Year of production: 2001 Brand: Demag Technical data Shot Weight: 205 g Clamping Force: 800 kN Screw dia: 40 mm Redpfsvvtx Tex Ammou Injection pressure: 1830 bar Tie bar distance: 400 x 400 mm Platen size: 590 x 580 mm Mould height min.: 250 mm Type of controls: NC4 Language: German Power: 26,1 kW Workinghours: 70180 h Weight: 3600 kg Dimensions: 4,35 x 1,7 m Hopper: No Core pull: Yes

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: 16119, Electric pallet truck, Zallys Jespi model, manufactured in 2016. Fully functional, no damage. Features custom-made, high stainless steel side rails that are completely removable. Original, low side rails are included. Maximum load capacity: 500 kg. Previously used for transporting food, well-maintained, and never overloaded. Rjdpfxey Ubvie Ammeu

Condition: used, 2-stage electric motor with gearbox DEMAG Type FG 08B-B3-23-H1-F1 Output speed fast: 915 rpm Output speed slow: 174 rpm 1 unit three-phase DC shunt-wound motor DEMAG Type: KBA 125 B Motor No.: 3926599 Speed: 915 rpm Motor power: 4.7 kW Power supply: 400 Volt, 50 Hz - Clutch disconnects via armature thrust movement during direct drive 1 unit three-phase DC shunt-wound motor DEMAG Type: KBA 80 A Motor No.: 3926599 Speed: 1360 rpm Motor power: 0.83 kW Power supply: 400 Volt, 50 Hz - Brake disengages via armature thrust movement during operation - When stationary, the brake operates through the reduction gearbox on the motor - Output speed via gearbox: 174 rpm Reduction gearbox DEMAG Type FG 08B-B3-23-H1-F1 Gearbox No.: 13926599 Rsdjy N D E Aepfx Ammsu Input speed: 1360 rpm Output speed: 174 rpm Gear ratio: i = 7.8 Output shaft via motor armature: Ø 32 mm Shaft stub length: 80 mm Centering diameter at motor: Ø 125 mm Bolt circle diameter at motor: Ø 150 mm / 4xM12 internal thread Dimensions (LxWxH): 1100 x 430 x 300 mm Weight: approx. 160 kg Good condition

Condition: used, -Dimensions: 782x1195x2142 mm -Fixed trolley: 400x800 -Model: 3P12B -Serial no.: 3P12B31 -Capacity: 80 baguettes -Voltage: 400V -Power: 31 kW -Weight: 500 kg Rjdpfx Amowxxiusmou -Refurbished equipment: the equipment is prepared upon order, pick-up and return dates are agreed at that time (please request the price after refurbishment)

Condition: excellent (used), - Brand: BONGARD - Model: 8.62E - External dimensions: 1430x1930x2220 mm - Tray size: 600x800 mm - Capacity: 150 baguettes - Electric Rjdpfxswxmgno Ammou - Power: 56 kW - Voltage: 400 V

Condition: not inspected (used), functionality: unexamined, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item between 23/06/2026 and 26/06/2026! Auction of a workshop trolley with the following contents: Open-end spanners Combination spanners Socket set Rsdpfx Amsy D Ry Aemju Screwdrivers Pliers Spirit level MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 870 x 460 x 1,000 mm Weight: 70 kg External reference: 56

Condition: used, Electric Loading Lift - Mobilift for ergonomic handling of small loads Pedestrian stacker, pallet stacker Manufacturer: TransOrt Model: PRO 140 M Serial No.: P14012557 Year of manufacture: 2018 Rated capacity: 140 kg (with 400 mm outreach) Lifting stroke: 1380 mm Lifting cycles per charge: 140 kg x 1 m x 100 times Lift height: max. 2900 mm (underside of jib) Lifting speed (fast / slow): approx. 100 / 50 mm/s Outreach (load handling device): 890 mm Chassis length: 1100 mm Chassis width: 440 to 740 mm adjustable (internal measurement) Chassis height: 85 mm Underride length: 620 mm Chassis design (front / rear): Ø 80 / 125 mm (2 fixed / 2 swivel castors) Total length: 1450 mm Total width: 635 mm Overall height: 1980 mm Maximum height: 2980 mm (with lifting device extended) Battery capacity: 24 V / 18 Ah - Electric lifting drive via toothed belt with safety mechanism that stops the descent via freewheel as soon as the load contacts an obstacle. - Cable remote control with spiral cable and buttons for 2 lifting speeds - Control panel with emergency stop, on/off, and battery status indicator - Battery pack with quick-change system - 2 x 12 Volt, 18 Ah lead-acid batteries installed in battery pack - Integrated charger 24 VDC, 80 Watts - Manually maneuverable, steering castors with three-level parking brake - Continuously height-adjustable handle - Load pickup quick coupling TAWI system - Flange plate for quick coupling on the jib 30 x 340 mm with 5x M8 threaded holes Net weight of loading lift: 75 kg Installed lifting aid: Counterbalance jib made of 60 x 40 x 3 mm rectangular stainless steel tube Lifting aid capacity: 50 kg Outreach to handle: 865 mm Hanging handle with knurled nut Net weight: 13 kg As new condition, unused ex stock 2 units available, price per unit Rsdpfxjpcqdwe Ammsu

Year of construction: 1995, condition: good (used), DEMAG Electric Hoist DKUN 5-500-K-V1F4 Type: Electric chain hoist Rjdpfx Asudv Tksmmou Year: 1995 Chain: 3 meters Three-phase 380V Capacity: 1.000Kg 2 speeds (12,5m/min. - 6,2m/min.) 1.7Kw

Condition: new, New Electric Belt Hoist SWF - PFAFF Silberblau Type ATHLO belt - BH203L3E Textile belt hoist, crane hoist with trolley Serial No.: 3540053G01007 Year of manufacture: 2003 (new - unused) Lifting capacity: 1,600 kg Hook path: 6 meters Main hoisting speed: 6.5 m/min Creeping hoist speed: 1.0 m/min Trolley travel speed: 10 / 2.5 m/min Distance from undercarriage wheel to load hook: approx. 450 mm Pendant control cable length: approx. 6 meters 3 load strands = 1,600 kg Main hoist motor power: 1.9 kW Creep hoist motor power: 0.3 kW Trolley motor power at 10 m/min: 0.25 kW Trolley motor power at 2.5 m/min: 0.06 kW Power connection: 400 Volt, 50 Hz - Emergency stop - Very quiet, low-maintenance, and safe operation - Trolley for I-beams, with 2 travel speeds - Suitable for I-beams with approx. 100 to 200 mm width - TELEMECANIQUE position limit switch type XCR Space required L x W x H: 1100 x 700 x 600 mm Rodsypw Hrspfx Ammeu Weight: 140 kg As-new condition – unused from stock

Condition: reconditioned (used), Year of construction: 2000, Manufacturer: Demag Type: DH520 H20 4/1 F10 Year of manufacture: 2000 lifting capacity appr.: 8.000 kg hook path appr.: 10,000 mm trolley track appr.: 1,400 mm Reeving: 4/1 Thruster group: FEM/ISO 2m/M5 Working speeds: hoist appr. 0.8/8.0 m/min trolley appr. 5.0/20.0 m/min Certification of the remaining service life of appr. 80% by an inspection expert Equipped with: - Mechanical fine lift F10 - Rope and bottom block 4/1 - trolley Redpfx Ajkqm Aiommju

Operating hours: 800 h, condition: used, functionality: fully functional, lifting height: 6,000 mm, main lifting speed: 8,000 mm/min, Demag monorail trolley, short design, ready for immediate use, incl. overload protection and electrics, trolley wheels must be replaced, 2x available, KBH140 B2/12 Rsdoq R Rf Aopfx Ammju

Condition: used, Electric chain hoist, DEMAG crane Type PK2N-F Serial no.: 5785034 Year of manufacture: 1988 Load capacity: 500 kg Hook travel: 5 metres Main lifting speed: 5 m/min Precision lifting speed: 1.25 m/min Control pendant cable length: approx. 3.5 metres Power supply: 400 Volt, 50 Hz - 2 load chains = 500 kg - Electric trolley DEMAG, type 13/3 PF8 with 1 travel speed approx. 8 m/min, type 13/3PF 8 Rodsxf Uqfjpfx Ammeu - For double-T beams with approx. 100 to 200 mm flange width Weight: 63 kg Good condition

Condition: used, Electric trolley, electric trolley for chain hoist, crane trolley, trolley, rolling trolley For double T-beam STEEL type GU-A035400 . 0104671 Year of construction 1986 Load capacity approx. 1100 kg Roller diameter approx. 80 mm track width from 65 mm to 110 mm driving speed 12,5 m/min Motor power 0,42 kW Mains connection 380 Volt, 50 Hz. weight 20 kg good condition Rodel Ab Rtspfx Ammou

Condition: good (used), Year of construction: 2023, machine/vehicle number: 11141057, Offer 25033 Technical data: - Total lifting capacity: 1,600 kg - Lifting capacity per chain strand: 800 kg - Lifting height – chain travel approx.: 8 m - 2 lifting speeds: 3.0 / 12.0 m/min - Drive: 400 V Rodpfx Aewwiwasmmeu - Weight approx.: 160 kg - Space requirements without chain box approx.: W 650 x H 350 x D 650 mm - Space requirements with chain box approx.: W 650 x H 850 x D 650 mm - Handheld remote control - 1 piece separate redirect support for the second chain strand - 1 piece load pick-up with threaded rod

Condition: excellent (used), functionality: fully functional, 3 units complete DEMAG single-girder trolleys with hoist DH316 H12 Load capacity 6.3 t Rope reeving 4/1 Hoist motor KBH140 B2/12 Main lift 6.3 m/min Fine lift 1.0 m/min Hoist gearbox i=85 Trolley: Travel motor KBF80 A8/2 / Gearbox AF04 i=14.1 Redpfev Uvn Isx Ammju With DEMAG DST pendant control and main crane connection box Price is per unit; when purchasing 3 units, €3,900.00 each Good condition Info: 20,000 DEMAG spare parts and components in stock! demag parts warehouse