Used Dimter Fingerjointing Press for sale (12,178)

Condition: used, Year of construction: 2007, Lamination press Manufacturer: Dimter Tedpozuzwqefx Antjb Type: PROFIPRESS L2500 Year of manufacture: 2007 Technical data Wood dimensions to be processed Wood width, panels: 30 - 150 mm Wood thickness: 11 - 60 mm Wood inlet length: 800 - 2500 mm Panel widths, variable: max. 1300 mm Specific pressing pressure for cross-sections of 2500 x 60 mm: up to 1.6 N/mm2 The pressing surface per press cycle must not be smaller than 100 cm2 Filling width of the press per cycle: min. 650 mm / max. 1300 mm Max. filling area of the press per cycle: 3.25 m2 (The max. usable press width depends on the widths of the individual lamellas.) Wood type Softwood/hardwood Press without options Electrical connection, press: 7 kW Electrical connection, 40 kW generator: 56 kW Operating voltage: approx. 400 Volt / 50 Hz (C/s) Collection table extended to 3700 x 1300 mm, with stainless steel wood support Motor-driven multi-function slider Lamination press Profipress L 2500 Press bed area approx. 2500 x 1300 mm Sturdy base frame with lower press table made of stainless steel as a grounding electrode Quick-change stop guide sets for panel thicknesses of 19 - 40 mm, which can be hydraulically adjusted to the current filling width Hydraulic special pressure elements ensure uniform pressure distribution over the entire joint length and compensate for tolerances In multi-lane operation, filling widths may vary by a maximum of 15 mm Upper pressure plate with hydraulic drive generates high vertical pressing pressure for minimal displacement Integrated hydraulic unit for generating pressing force and driving the hydraulic motors Control cabinet and control panel Protective cladding Additional individual pressure elements from above Automatic gluing station with precision gluing head Infeed for different widths Camera Washing and rinsing device for gluing head Modem incl. software for online connection Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is non-binding.

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1300x800x1350 mm Weight 370 kg Total power requirement 0 kw Tsdpfx Aov A E Nksntsb

Condition: repair required (used), Year of construction: 1994, functionality: limited functionality, machine/vehicle number: 6305/7, pressing force: 15 t, working height: 905 mm, total length: 1,900 mm, pressing force 15 t line consisting of : feed rollers with servo drive press 15 t inclusive hydraulic unit feed rollers with servo drive Tedpfx Aneg T Spajtob saw >>without electrical equipment

Condition: used, Dimter Profipress L 2500 Year of manufacture: 2006 Dimensions: • Lamella width (for panels): 30-150 mm • Thickness: 11-60 mm • Infeed length: 800-2500 mm • Panel width: variable, up to max. 1300 mm • Infeed width per cycle: min. 650 mm / max. 1300 mm • Integrated hydraulic unit for pressing force and hydraulic motors • Electrical: • Operating voltage: approx. 400 V / 50 Hz Tsdpfx Anoyhggrstsb • Electrical connection rating for 40 kW RF generator: 56 kW

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Weinig Dimter Profipress C 2800 P - 6 m gluing press Manufacturer: Weinig Dimter Model: Profipress C 2800 P - 6 m Year of manufacture: 2009 Condition: Very good Machine description: For sale: Weinig Dimter Profipress C 2800 P - 6 m wood gluing press, year 2009, designed for the production of glued wooden panels and elements made of soft timber. The machine was developed for efficient production using PVAC glue in D2 / D3 class and allows processing of material within specified width, thickness and input length ranges. According to the documentation, this model can process timber with widths from 30 to 80 mm, thicknesses from 15 to 40 mm and input lengths from 2100 to 2800 mm. The machine allows the production of panels with variable widths from 600 to 1200 mm. For short lengths, the collecting distance range is 700 to 1400 mm. The output is up to 10 to 15 infeeds per minute, depending on the entrance width. The Profipress C 2800 P - 6 m is intended for processing soft timber. The permitted bending tolerance is maximum 5 mm per meter. The documentation also specifies recommended operating conditions, including room temperature from 15 to 30 degrees Celsius and air humidity in the range of 40 to 65 percent. Technical data: - Model: Profipress C 2800 P - 6 m Tsdeyvgiajpfx Antob - Year of manufacture: 2009 - Performance: max. 10–15 infeeds/min, depending on entrance width - Timber width: 30–80 mm - Timber thickness: 15–40 mm - Timber entrance length: 2100–2800 mm - Collecting distance for short lengths: 700–1400 mm - Panel width: 600–1200 mm - Timber type: soft timber - Permitted bending: max. 5 mm/m - Glue type: PVAC D2 / D3 - Recommended room temperature: 15–30°C - Recommended air humidity: 40–65% Features and advantages: - Press designed for glued panel production - Machine from the renowned Weinig Dimter brand - Output up to 10–15 infeeds per minute - Possibility to produce panels with variable width - Suitable for processing soft timber - Works with common PVAC D2 / D3 glue - Industrial application for woodworking and production plants

Condition: excellent (used), total length: 3,000 mm, total width: 1,500 mm, Panel press in very good working condition + Grecon finger jointing Tedpfxet Uduxe Anteb

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: HB10011N2025006, The machine has not been used yet! MACHINE DETAILS Control: Teach-in Motor power: 4.0 kW Dimensions & Weight Dimensions (L x W x H): 1,300 x 800 x 1,400 mm Unladen weight: 800 kg Transport packages: 1 piece EQUIPMENT Documentation Tjdpfxozuw D Te Antsb CE marking CE certificate

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 100 t, stroke length: 380 mm, table width: 300 mm, table length: 1,500 mm, throat depth: 1,100 mm, TECHNICAL DETAILS Press force: 100 t Max. stroke: 380 mm Stroke length: 100 mm Overhang: 1,100 mm Vertical adjustment: 750 mm Table length: 1,500 mm Table width: 300 mm MACHINE DETAILS Press type: Single-acting Control system: Conventional Motor power: 3.0 kW Dimensions & Weight Dimensions (L x W x H): 1,450 x 800 x 2,200 mm Net weight: 970 kg Transport packages: 1 piece EQUIPMENT Movable press cylinder Documentation Tedpezxcldjfx Antob CE certificate CE marking

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand colour production system, the “Xerox Versant 180 Press” Tedpfxozxwyps Anteb Items for sale: 1 x Xerox Versant 180 Press with the following specifications: incl. Fiery NX Pro-01 Includes A-CF01 paper deck Includes A-GW03/A-FN13 finisher Includes duplex ADF / R-ADF Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 1,096,427 Black: Approx. 661,731 Colour: Approx. 434,696 Condition: This is a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested for functionality A test print can be seen in the photo Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: ready for operation (used), General tongue-and-groove joint Working width max. 1660 mm Tsdpszxma Sofx Antob Milling height max. 200 mm Milling motor 14 kW A general tongue-and-groove joint can be used to join smaller, panel-like elements together to form a larger panel, or it can be used to create a continuous strand from smaller elements, which is then cut to the required length after the tongue-and-groove joint is formed.

Condition: refurbished (used), DKV III continuous press with braking unit Completely overhauled Optional with original hydraulic motors or with servo motors Options: - Chain threading - Co-rotating cut-off saw Function: For pressing the dovetail joint without stopping (in a continuous process). The upper and lower plate chains generate the feed force. Downstream braking plates transmit the required longitudinal pressing force to the wood through friction. Advantages: Tedpfsv T Aqyjx Antob - High performance despite a relatively slow feed rate - Absolutely no vertical displacement of the dovetail joints Technology: Heavy-duty plate chain 2", pneumatically adjustable Braking elements are floating Press force measurement via contact manometer Height adjustment electrically Maximum press force adjustable and dependent on feed rate and wood cross-section, 4500 daN at 32 m/min 2200 daN at 70 m/min Feed rate adjustable 10-70 m/min Drive power Adjustment of infeed unit 1 kW Adjustment of brake 1 kW Hydraulic motors 45 kW Technical data: Wood width 90 - 180 mm Wood thickness 20 - 80 mm Ratio thickness - width 6 : 10 Wood cross-section with 15/16.5 mm tenon max. 90 cm²

Condition: used, functionality: fully functional, machine/vehicle number: 3910010947, counter reading (black): 3,310,691, With this offer, you are purchasing a second-hand colour production system, the “Xerox Versant 4100 Press” Items for sale: 1 x Xerox Versant 4100 Press with the following specifications: Tsdpfx Aezmpbnsnteb incl. Paper Deck A-CF03/A-CF04 incl. Finisher A-GW04/A-GW07 Includes Stacker LCS-1 Includes SquareFold Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 9,571,697 pages Colour: Approx. 8,874,258 pages Black: Approx. 697,439 pages Condition: This is a second-hand machine, which may show signs of wear (minor scratches or yellowing). The machine has been tested for functionality A test print can be seen in the photo Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: repair required (used), functionality: unexamined, Dovetail slotting machine for wood packages dimter HK 400 Dovetail slotting machine Input lengths: 800–6000 mm Cutting height: 285 mm, optionally 300 mm Color: Blue Consisting of: Pos. 01 Packaging unit Pos. 02 Package roller conveyor Pos. 03 Central milling cutter Pos. 04 Package roller conveyor Pos. 05 Package singulation unit Pos. 06 Chain cross conveyor Pos. 07 Infeed roller conveyor Pos. 08 Cycle press Pos. 09 Feed unit Pos. 10 Cut-off saw Including control cabinets and operator panels Tsdpfovi Hw Nex Antob The machine requires repairs and is sold in its current condition. It has already been dismantled and is stored in Achern. All technical documentation is available. We are available at any time to answer questions about the machine and provide technical information. We will provide consulting support for repair and reassembly.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 42,874 h, working width: 300 mm, cutting length (max.): 6,300 mm, workpiece width (max.): 120 mm, cutting speed: 300,000 mm/min, Optimizing Cross-Cut Saw manufactured in 2019. This WEINIG / DIMTER OptiCut 450 features a maximum board length of 6,300 mm and a wood thickness capacity ranging from 12 mm to 120 mm. It includes a powerful saw motor with 7.5 kW and a feed speed of up to 300 m/min. If you are looking to get high-quality cutting capabilities, consider the WEINIG / DIMTER OptiCut 450 machine we have for sale. Contact us for further details. • Working Height: 900 mm • Feed Direction: Left-hand feed • Blade Diameter: 500 mm • Blade Bore: 30 mm • Input Length, Min.: 500 mm • Input Length, Max.: 6,300 mm Tedpfx Aszwu Hwjnteb • Wood Width, Min.: 30 mm • Wood Width, Max.: 310 mm • Wood Thickness, Min.: 12 mm • Wood Thickness, Max.: 120 mm • Maximum Rectangular Wood Section: 310 × 12 mm • Maximum Rectangular Wood Section: 190 × 120 mm • Minimum Fixed Length After Sawing: 150 mm • Minimum Fixed Length at End of Board: 180 mm • Maximum Board Curvature: 10 mm/m • Length Tolerance: ±3 mm • Cutting Thickness Accuracy: ±0.8–1.5 mm • Feed Speed, Continuously Adjustable: Max. 300 m/min • Cutting Cycle Time, Including Braking and Acceleration: 0.6–1.0 sec. • Saw Motor Power: 7.5 kW (10 HP) • Feed Motor Power: 5.0 kW (7 HP) • Vario Conveyor Motor Power: 2.5 kW (3.4 HP) • Electrical Connection: Approx. 18 kW • Operating Voltage: 400 V / 50 Hz • Control Voltage: 230 VAC / 24 VDC • Nominal Current: 30 A • Fuses: 35 A • Compressed Air Consumption: Approx. 1,200 Nl/min • Operating Pressure: Approx. 8 bar • Extraction Air Velocity: Approx. 30 m/sec. • Extraction Air Volume: Approx. 1,800 m³/h • Sorting Conveyor Width: 250 mm • Usable Conveyor Width: 210 mm • Maximum Workpiece Width: 300 mm • Exit Conveyor Length: 7.5 m • Automatic Width Measurement: Laser distance sensors • Width Measurement Accuracy: Max. ±2 mm • Number of Active Products: Max. 16 • Minimum Wood Thickness for Measurement: 12 mm • Scrap Pit Width: 250 mm • Maximum Scrap Length: Approx. 120 mm • Heavy-Duty Ejector: For workpieces over 20 kg • Ejector Plate Height: 80 mm • Writing Length: Workpiece length − 10 mm • Control Panel: OptiCom Pro 18.5" • Display Type: Industrial TFT touchscreen • Display Resolution: 1366 × 768 pixels • Front Protection: IP65 • Board Infeed Capacity: Up to 6.3 m • Marking Station: 2 marking positions • Marking Bench Length: 5 m • Electrical System: 400 V / 50 Hz • UPS: 24 V supply • Operating Hours: 42,874 h

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 467334, Manufacture year 2010 Todpfxeypvdis Antsb Machine specifications: - Push infeed, max. length 6300 mm - Automatic length measuring and chalk reader - Cutting width 40 – 420 mm - Cutting height 15 – 170 mm - Min. cross section 20 x 10 mm - Max. cross section 270 x 170 / 410 x 30 mm - Motor 13.5 kW - Total electrical load approx. 22 kW -Operating pressure approx. 8 bar - Saw blade diameter 630 mm / bore 30 mm Consisting of: 1. Cross chain infeed system 8 pc. chain transport with 3 latch rows 2. Push infeed system with liftable pusher Infeed length 6300 mm, length detecting and chalk reader 3. OptiCom Direct controller 4. Opticut cross cut saw unit S90 XL With side pusher and waste gate 5. Outfeed transport belt

Condition: good (used), Year of construction: 1999, functionality: fully functional, Description LVD PPI 55/25 CNC PRESS BRAKE Force 55 tons - bending length 2500 mm - CNC MNC 95/C - distance between frame 2050 mm - motor 10 HP Tedpovk Ncqjfx Antob - weight 4200 kg INCLUDED A LOT TOLIINGS Specifications Manufacturer LVD Model PPI55/25

Condition: good (used), Year of construction: 1981, functionality: fully functional, WE OFFER AN NICE CONDITION PRESS SMG DZ 100-750/560 WITH SAFETY SICK CONTROL BARIER POWER: 1000 KN Tsdpfevldxpex Antob MACHINE IS AWAILIBLE IMEDIATELY FROM STOCK.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, WE OFFER AN VERY NICE DUNKES PRESS Tedpfx Anjvldx Notjb MACHINE IS READY FOR OPERATION.

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, WE OFFER AN BEAUTIFULL CONDITION DEEP DRAWN PRESS 160 TON WITH BACK FORCE BOTTOM 70 TON Tsdpfx Aevxbn Usnteb MACHINE WAS BUILD ON ORDER MACHINE WAS USED ONLY A COUPLE TIMES PER YEAR FOR SOME SMALL PARTS. CONDITION IS EXCELLENT . NEWER RUN A PRODUCTION. WE CAN ALSO DELIVER MACHINE FOR A CUSTOMER TABLE SIZE: 1030 X 630 OPEN GAP: 740 MM TOTAL WEIGHT APPROX 8000KG DIMENSION 1500 X 1500 X 4000

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, Description 100 TON C FRAME PRESS WITH BOTTOM FORCE BACK UP 40 TON Machine is great working condition, was overhauled cilinder, sealings. AWAILIBLE 3 MACHINES BOTTOM FORCE 40 TON Specifications Manufacturer MULLER 100T Model CEZ 100 Year 1979 Condition Used Press force 100 TON Travel up doen 0-560mm Todpfxjvldxio Antob Travel bottom up 0-200mm Power 15Kw

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Description WEOFFER AN BEAUTIFULL CONDITION REIS PRESS YEAR: 2004 WITH SIEMENS OPERATIONAL PANEL. Description Press force: 1000 KN Press closing speed: 50 mm/s Press opening speed: 50 mm/s Installation height: 1400 mm Maximum table distance: 1700 mm Todpfx Asxu Ddtontjb Tables: 1600×1300 mm Allowable weight 12000 kg No.1 clamping table Translation 1500 mm speed 200 mm/s Maximum load 6000 kg Nr.1 Tilting table Angle 60° Maximum load 7500 Kg Overall dimensions: 3900 x 2400 x 3045 mm FOR TRANSPORT WILL BE DISASEMBLED -CILINDER AND HYDRAULIC UNIT TO FIT ON MEGA TRAILER 3000mm height is required. Weight: 17000 Kg

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, WE OFFER AN VERY NICE CONDITION EXCENTRIC PRESS MAX FORCE: 63TON HEIGHT 10 - 110 mm Todovlduqepfx Anteb number of stroke: 140/71 weight 4500kg MACHINE WILL BE AWAILIBLE AFTER NEW YEAR

Condition: used, Year of construction: 2025, total length: 1,200 mm, total width: 800 mm, total height: 1,800 mm, Colour: Blue Empty weight: 450 kg Price: On request - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: PB12093N2025005 - Operating hours: 0 - Drive system: Conventional - Vertical/Horizontal: Horizontal and vertical - Number of rolls [pcs.]: 3 - Power [kW]: 1.5 - Shaft diameter [mm]: 50 - Top roll diameter [mm]: 155 - Bottom roll diameter [mm]: 155 - Bending speed [mm/min]: 11 - Capacity diameter round [mm]: 50 - Options: Digital readout - Transport dimensions: 1200mm x 800mm x 1800mm (l x w x h) Tjdpfjztxn Rex Antob - Transport weight [kg]: 450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2018, Optimizing Cross-Cut Saw manufactured in 2018. This WEINIG DIMTER Opticut S90 features a saw blade diameter of 500 mm and a maximum cutting height of 120 mm. It accommodates input lengths from 400 to 6,300 mm and widths from 20 to 300 mm. If you are looking to get high-quality cutting capabilities, consider the WEINIG DIMTER Opticut S90 machine we have for sale. Contact us for further details. • Saw blade • Diameter: 500 mm • Bore: 30 mm • Adjustable saw blade speed: 40–100% via frequency converter • Workpiece capacity • Input length (min/max): 400–6,300 mm • Width (min/max): 20–300 mm • Thickness (min/max): 10–120 mm • Maximum cutting height: 120 mm • Minimum cross-section: 20 x 10 mm • Maximum cross-section 1: 215 x 120 mm • Maximum cross-section 2: 300 x 40 mm • Permissible timber curvature: max 2 mm/m or 8 mm over entire length • Table inclination: 10° Tsdpfozuhdwsx Antob • Motion and accuracy • Positioning speed (reverse stroke): max approx. 180 m/min • Positioning speed (forward stroke): max approx. 60 m/min • Positioning accuracy: +/- 0.1 mm • Motors and power • Pusher motor power: 5.1 kW • Saw motor power: 7.5 kW • Total electrical load: approx. 15 kW • Control and interface • Control unit: OptiCom Pro with 18.5" touch screen • Screen resolution: 1366 x 768 pixels • Protection class (front): IP65 • Interface: USB port and Ethernet network connection • Data format: CSV (ASCII) for import/export • Utilities and environment • Voltage: 400 V / 50 Hz • Operating pressure: 6–8 bar (min.) • Air consumption: approx. 250 NL/min • Extraction connection: diameter 125 mm • Required extraction performance: speed approx. 30 m/s; volume approx. 1,300 m³/h • Noise level (idling): ≤ 85 dBA

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 3,000 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 142 mm, controller manufacturer: SIEMENS, controller model: WS 400-20, CNC processing center manufactured in 1997. This WEINIG / DIMTER Unicontrol 10 features a maximum workpiece length of 3,600 mm and a maximum workpiece height of 100 mm. It includes a powerful cross-cut saw with a spindle speed of up to 3,000 rpm and a tenoning spindle motor power of 15 kW. If you are looking to get high-quality CNC processing capabilities, consider the WEINIG / DIMTER Unicontrol 10 machine we have for sale. Contact us for further details. • Max. workpiece height: 100 mm • Min. workpiece height: 40 mm • Min. workpiece width: 40 mm • Max. workpiece width: 140 mm • Max. workpiece length with CNC stop: 3,500–3,600 mm • X-axis stroke: 3,000–3,500 mm (version dependent) • Cross-cut saw motor power: 3.7 kW • Cross-cut saw spindle speed: 2,800–3,000 rpm • Cross-cut saw max. tool diameter: 400 mm • Cross-cut saw spindle diameter: 40 mm • Tenoning/slotting spindle quantity: 2 pcs • Tenoning spindle diameter: 50 mm • Tenoning spindle clamping length: 400–640 mm • Tenoning spindle max. tool diameter: 400 mm • Tenoning spindle motor power 1: 11 kW • Tenoning spindle motor power 2: 15 kW • Tenoning spindle speed: 2,900–3,250 rpm • Profiling spindle quantity (vertical): 2–3 pcs • Profiling spindle diameter: 50 mm • Profiling spindle clamping length: 320–400 mm • Profiling spindle max. tool diameter (flight circle): 232 mm Tjdpfx Aszug Nrsntjb • Profiling spindle motor power: 11 kW (each) • Profiling spindle speed: 6,000 rpm • Horizontal profiling unit (top) motor power: 3 kW • Horizontal profiling unit spindle diameter: 40 mm • Horizontal profiling unit max. tool diameter: 130 mm • Horizontal profiling unit speed: 5,850 rpm