Used Dual Pressure Tester for sale (15,577)

Condition: good (used), Pressure tester, pressure gauge, manometer, test manometer, compression gauge -Manufacturer: Hydrotechnik Limburg, pressure tester Bwodpoyccvfjfx Ad Ael -Pressure range: 2x 0 to 10 bar -Dimensions: 260/150/H205 mm -Weight: 3.2 kg

Year of construction: 1999, operating hours: 76,000 h, condition: used, functionality: unexamined, Technical parameters: • Manufacturer: AUSTRIAN ENERGY • Type: Dual pressure drum boiler (1999) • HP steam flow: t/h 40.8 • LP steam flow: t/h 17.3 • HP steam parameters: bar/°C 52 / 425 • LP steam parameters: bar/°C 4.2 / 180 • Flue gas temperature at HRSG outlet: °C 80 • Flue gas stream to the stack: t/h 468, k Nm3/h 482 • Heat recovered by the steam and water cycle from flue gas in HRSG: MWt 45.9 • Maximum output of DH exchanger: MWt 8.0 • Operating hours: 76,000 hours Bwjdpfx Adoy D Hy Es Asl The high- and low-pressure sections of the equipment and the drums (HP and LP) consist of 6 independent, transportable modules. The boiler wall insulation is partial and requires replacement.

Condition: new, Year of construction: 2024, functionality: fully functional, PTR1600L Carmec Pressure tester for cylinder head and block - new machine Hydraulic tray lifting, motorized tray rotation. Max. cylinder head dimensions: 1350 mm x 300 mm × 395 mm Max. cylinder head weight: 300 kg Adjustable pressure air test: 0 bar -10 bar Adjustable working temperature: 0 - 90°C Stainless steel tank capacity: 540 Liter Heating power: 2× 4,0 kW Hydraulic unit power: 0,75 kW Rotation motor power: 0,18 kW Maximum vertical travel distance: 600 mm Up and down travel time: 10s Bodpfx Adou S Eqnj Ajwl Rotation speed: 4 RPM Supply voltage: 220-440V 3Ph+E ( +/- 10% ) Frequency: 50-60 Hz Operating voltage: 24 V AC Empty tank: 440 kg Machine dimensions: 2050 mm × 1120 mm × 1650 (max. H) mm If you are interested, please contact me! More machines for sale: Berco, Comec, A-M, Carmec, Kwik-Way, Serdi, PEG Connecting rod boring, cylinder boring, honing machines, valve seat milling, parts washer, valve grinder, line boring, valve guide press machine, pressure test bench, resurfacer, vacuum tester, valve spring compressor, crankshaft polisher machines

Condition: good (used), Pressure tester, pressure gauge, manometer, test manometer, compression gauge Bsdpjycczuefx Ad Aewl -Manufacturer: TGL, pressure tester -Pressure range: 0 to 25 bar -Case dimensions: 330/200/H140 mm -Weight: 3.6 kg

Condition: good (used), Analyzer, vapor pressure tester, Minivap VPS Bedpfswbd Twjx Ad Aowl -Manufacturer: Grabner, steam pressure tester Minivap VPS -Type: 210-000-00 -Carton dimensions: 200/185/H320 mm -Weight: 7.9 kg

Condition: good (used), Pressure testing device, measuring device -with trailing-pointer -Max. pressure: 20 bar -High-pressure hose Bwjdpfxjb A Rlys Ad Ael -Dimensions: 400/160/H200 mm -Weight: 4 kg

Condition: excellent (used), Electrical installation tester from the renowned German manufacturer Gossen Metrawatt The PROFITEST MXTRA model is designed for professional measurement of electrical installations and safety inspections. The device is used by electricians, service technicians, and for routine installation inspections. ⸻ TECHNICAL SPECIFICATIONS Manufacturer: Gossen Metrawatt Model: PROFITEST MXTRA Supply voltage: 230 V Measurement category: CAT III 600V, CAT IV 300V Professional electrical installation tester ⸻ INCLUDED IN THE SET PROFITEST MXTRA tester measurement cable adapter carrying bag The exact set is shown in the photos ⸻ APPLICATIONS Bwsdpfx Aoywcr Dsd Aol electrical installation measurement safety testing installation inspections electrical service ⸻ CONDITION used visually in good condition

Condition: excellent (used), Electrical safety tester from the renowned German manufacturer Gossen Metrawatt The SECUTEST Pro model is designed for testing electrical devices in accordance with the IEC 62353 standard. The set includes several devices along with measuring leads and carrying bags. TECHNICAL DETAILS Manufacturer: Gossen Metrawatt Model: SECUTEST Pro Standard: IEC 62353 Power supply: 230 V Professional tester for electrical device safety SET INCLUDES Several testers Measuring cables Adapters Carrying bags Exact condition as shown in the photos APPLICATIONS Testing of electrical devices Service and maintenance Safety inspections Medical and industrial use CONDITION Used Visually in good condition Technical condition not fully checked IMPORTANT Sale as a set as shown in the photos Bwjdpfx Asywcrwjd Aol No additional accessories except those pictured SHIPPING

Condition: like new (used), TECMA SEALED CUPS DUAL PACKER x2, x4, x6 PACK CARTON YOM 2013 AS NEW CONDITION Bwodpfxeyrx Uvs Ad Aol MADE IN FRANCE

Condition: good (used), Mixing Tank, Mixer, Pressure Vessel, Heating Jacket, Chemical Industry, Used Equipment Bwsdpfotrdyrex Ad Ajl Design: Cylindrical tank with shallow dished bottom and top, equipped with an agitator. The tank bottom and shell are double-walled with a heating jacket. The tank lid is removable with a flanged bolt connection. The lid has a cleaning opening. Material Quality: Carbon steel with painted surface. Manufacturer: Robert Hinkel & Co Type: 9601 Volume: 200L Operating Pressure: 3 bar Electrical Data: 380V; 0.75kW; 2.0A

Condition: like new (used), Year of construction: 2017, functionality: fully functional, Description EQUIPMENT WAS NOT USED IT IS LIKE A BRAND NEW. IT CAN BE USED AS A LEAK OF AIR DETECTOR FOR BRAKES FOR COMPRESSED AIR INSTALATIONS IN SUITCASE WITH DOCUMENTS WE CAN SHIP WORLWIDE Specifications Model LD 400 Year 2017 Condition Used Bwodpsvlavwsfx Ad Aol

Condition: used, Chroma Type: ATE 17020 The Chroma 17020 is a highly professional, modular test system for lithium-ion & other battery pack qualification. Particularly strong in: - Lifetime testing, BMS verification, and validation of complex charging cycles - High energy recovery – up to 85% efficiency - Flexible expansion through numerous channels or higher current ranges - Enterprise deployment with extensive safety features & data persistence Technical data – Chroma ATE 17020 PTS Feature Specification Model: Chroma ATE 17020 PTS System type: Regenerative battery pack test system (charge/discharge test) Channel output: 600 W to 60 kW (modular and scalable) Total output: Up to 600 kW (depending on configuration) Voltage range: 20 V / 60 V / 100 V / 200 V / 500 V Current per channel: Depending on module: from a few amps up to >300 A per channel Parallel operation: Yes, for higher current up to 2,600 A Current and voltage accuracy: ±(0.05% of reading + 0.05% of range) Power accuracy: ±0.1% Transition time (charge/discharge): < 50 ms Sampling rate (measured data): up to 50 kHz (with BatteryPro) Data logging: Cyclic, 10 μs – 1 s / memory for 60 min power failure Test modes: CC, CV, CP, CC-CV, DCIR, pulse, drive cycle, dynamic profiles Number of channels: Up to 60 channels (expandable) Bsdpfx Aswwrxaod Aewl Communication: CAN, S-Bus, Ethernet, USB Software: Chroma BatteryPro (test programming, real-time monitoring) Protection functions: OVP, UVP, OCP, UCP, OTP, reverse polarity, wire loss, delta V/I, etc. Energy recovery: Yes – up to 85% energy efficiency, grid-friendly (THD < 5%) Cooling: Fan cooling, low waste heat due to energy recuperation Temperature monitoring: Optionally integrable, range 0–90°C ±2°C Dimensions & weight: Depending on configuration (e.g. 19″ rack, approx. 300 kg) Mains connection: 3-phase, 400 V AC (depending on model) Applications: E-mobility, battery development, quality assurance, cell research Weight: approx. 455 kg Condition: used Scope of delivery: (See picture) (Specifications and technical data are subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily Bwsdpefz Dvvsfx Ad Aol • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. Bjdpfx Asfz Ax Sed Aswl The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology Bwjdpfx Aeflpmqsd Asl User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology Bjdpefzrapsfx Ad Aowl User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit Bwsdpfxsfz A D Nj Ad Asl • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: used, This listing is for 1 of 6 Parker SciLog SciPres Pressure Monitor with Pressure Sensors The unit is in full working condition and is ready for immediate release. This Unit is Supplied with Scilog Scipress pressure sensorsand cables. The Parker SciLog SciPres Pressure Monitor is an advanced monitoring solution tailored for biopharmaceutical applications. Designed to work seamlessly with single-use pressure sensors, this device enables real-time pressure monitoring and comprehensive data documentation, ensuring your processes run smoothly and efficiently. Key Features: - Pre-Calibrated Sensors: The SciPres pressure sensors are pre-calibrated for immediate use upon installation, eliminating setup time and ensuring accurate readings right out of the box. - Gamma-Stable Technology: Engineered to withstand gamma radiation sterilization, these sensors are perfect for environments requiring stringent sterilization protocols. - Robust Data Storage: Each sensor is equipped with a dedicated chip that stores crucial calibration and sensor-specific information, supporting traceability and data integrity. - Versatile Size Options: Available in five sizes to accommodate various tubing configurations, including Luer, 3/8" barb, 1/2" barb, 3/4" Tri-Clover, and 1" Tri-Clover Ladish, ensuring compatibility with your existing systems. - Real-Time Monitoring: The SciPres pressure monitor supports up to three pressure sensor inputs simultaneously, displaying transmembrane pressure (TMP) and differential pressure (dP) for comprehensive monitoring. - Max Pressure Watchdog: This safety feature records the maximum pressure detected, along with sensor ID and calibration info, providing critical data for overpressure prevention. Bedpfx Adjxxx Tqo Aswl - Software Integration: Connect the monitor to a PC using SciDoc software for automated real-time documentation of sensor data, enhancing data management and compliance. - Comprehensive Support: Enjoy extensive customer support to assist with any issues or queries you may encounter. Applications: - Ideal for critical biopharmaceutical processes such as filtration, chromatography, reverse osmosis, fermentation, and use with bags and manifolds. The SciLog SciPres Pressure Monitor is your reliable partner for precise pressure management in a variety of settings. Specifications: - Display: Backlit, user-friendly interface - Outputs: Analog and digital signals - Power Supply: Universal wall adapter included - Calibration Points: Supports multiple calibration configurations

Year of construction: 2015, condition: excellent (used), Spectra-Physics Spirit Dual Frequency Femtosecond Laser High Q Laser GmbH p/n: 06900 fR Rack LCR1 Bjdpfoym Dtajx Ad Aewl Used, device is in very good condition. Removed from "blue chip" pharma company in Cork, IE. Sold as seen

Condition: new, Year of construction: 2019, functionality: fully functional, total length: 6,000 mm, total width: 1,800 mm, Industrial vacuum and pressure impregnation plant designed for efficient and uniform wood treatment. The T10 features a Ø1,800 mm × 6,000 mm autoclave, handling 8–9 m³ of timber per charge, with operating pressure up to 15 bar (abs). The plant is fully automated via PLC, enabling precise control of vacuum, pressure, time and preservative absorption. Built to EN 13445 standards with third-party inspection, it is suitable for modern chrome- and arsenic-free preservatives. Complete system includes pressure vessel, working tank, vacuum and pressure pumps, cleaning system, trolley loading system and safety features. Bsdjx Sdptjpfx Ad Ajwl Ideal for sawmills and industrial wood processors seeking reliable, high-quality impregnation performance. Technical specifications available on request.

Condition: used, axle configuration: 3 axles, first registration: 06/2014, loading space length: 13,350 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, total length: 14,000 mm, total width: 2,600 mm, total height: 4,000 mm, tire size: 385/65R22.5, tire condition: 30 %, color: white, Year of construction: 2014, Equipment: ABS, Tire size: 385/65R22.5 Rear axle 1: Tire tread: 30%; Reduction: single reduction Rear axle 2: Tire tread: 50%; Reduction: single reduction Bwodpfx Adjy It N Ij Ael Rear axle 3: Tire tread: 40%; Reduction: single reduction Unladen weight: 9,045 kg Payload: 32,955 kg Gross vehicle weight: 42,000 kg Body manufacturer: Schmitz Cargobull Damage: none = Company information = Heisterkamp Used Trucks BV doesn’t just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are ready for immediate operation. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today’s demands, and fulfill the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Telephone: - Email: - Website:

Year of construction: 2015, condition: refurbished (used), functionality: fully functional, machine/vehicle number: E61MH16062525487 / E11MH15102480183 / DT1UE15055010409, This listing is for the Rational CMP 61 / CMP 101 combi steamers as a duo system. The units have been fully refurbished in our in-house workshop and are in full working order. As shown, the offer includes the combi steamers with UltraVent condensation hood and a mobile base frame as a complete package price. The two Rational units beside the duo system are not included in the offer. Bodpfoy I Tudox Ad Aowl Total tower height: 2125 mm The duo system can be disassembled for transport if required. You will receive an invoice including VAT. Service: We are happy to help you find a certified Rational service provider nationwide in Germany. Looking for a specific Rational model? Contact us— we have access to a large range of new and used Rational equipment. We offer expert advice on all models, including SCC, CM, CMP, VCC, iVario, iCombi Classic, and Pro. The CombiMaster® Plus by RATIONAL is built to last and impresses with features that guarantee the highest food quality. It supports the chef’s individual skills with precise control of the cooking chamber climate, as well as exact settings for temperature, humidity, air circulation, and cooking time. Technical data UltraVent condensation hood: (9261) W x D x H: approx. 854 x 1226 x 470 mm Minimum door opening for transport W x H: 845 x 1050 mm Power connection: V: 230 / Hz: 50-60 Weight: approx. 55 kg Serial number: DT1UE15055010409 Condition: used, refurbished, fully functional Technical data combi steamer CMP 61 (9257) Serial number: E61MH16062525487 Year built: 2016 Suitable for: 1/1, 1/2, 2/3, 1/3, 2/8 GN containers Capacity: 6 x 1/1 GN Meals per day: 30-80 Width: 847 mm Depth: 776 mm Height: 782 mm Minimum door opening for transport W x H: 845 x 850 mm Weight: 103 kg Electrical connection: 3-phase 400 V / 10.0 kW / 50/60 Hz Condition: used, refurbished, fully functional Technical data combi steamer CMP 101: (9260) W x D x H: approx. 847 x 776 x 1042 mm Minimum door opening for transport W x H: 845 x 1050 mm Power connection: 400 V / 18.6 kW / 50-60 Hz Capacity: 10 x 1/1 GN Weight: approx. 132 kg Serial number: E11MH15102480183 Year built: 2015 Condition: used, refurbished, fully functional Further information: Applications: Steam mode: from 30° C to 130° C Hot air mode: from 30° C to 300° C Combination mode: from 30° C to 300° C Finishing®: Brings pre-prepared and chilled foods up to serving temperature in an optimal climate Automatic fat separation for clean cooking chamber air Manual cleaning program 5 fan speeds: From sensitive to robust, the CombiMaster® Plus has the right airflow for every product Double-glazed, ventilated door (swiveling for easy cleaning) LED cooking chamber lighting Core temperature probe Cool-down function High-performance fresh steam generator (automatic rinsing and draining) Hand shower with automatic retract Dynamic air circulation If you have questions, need advice or would like to view something in person, you can reach us by phone during our business hours: Monday to Friday, 09:00 - 13:00 and 14:00 - 17:00. Sale is subject exclusively to our general terms and conditions (GTC).

Condition: as good as new (ex-display), Demo device with less than 20 operating hours // BEST CONDITION System: Optiv M 6.6.4 multi-sensor coordinate measuring machine with Dual Z technology Probes and sensors: - 10x CNC motor zoom with digital color camera and 12-segment LED ring light - HPsS-X1H Scanning Sensor with HH-A-T5 - HP-S-X1C/H stylus holder (1xM3) - M3 stylus kit for HP-S-X1C sensor - HR-X button rack for HP-S-X1C/H (3 ports, L=400) - Sensor calibration unit without calibration artifacts - Glass standard 25mm - Ring gauge 20mm Computers and software: Bsdpfoncfd Rjx Ad Ajwl - Measurement and evaluation software PC-DMIS CAD++ - Machine control unit BEST - Dell 27" monitor - work table Optional accessories: - Chromatic white light sensor (CWS) - CWS measuring head 3mm - Solara.MP12 - QA STAT 12 - O-QIS 12 Delivery, commissioning and other services on request If desired, the measuring device can be converted from OptiCheck3D V 5.0

Condition: excellent (used), Compressor type: Dry air Bwjdpfx Adewcgc Rj Asl Revolutions per minute 750 Outlet pressure: 42 bar Volume spawned: Number of cylinder lines 2/4 stages Supplied air: 7.73m³ / min; 464m³ / h Motor power: 90kW

Condition: used, This listing is for 1 of 3 Hamilton Microlab 600 series dual syringe dispenser The units are in full working condition and ready for immediate use General Description Bsdpfx Adsxhfztj Ajwl The Hamilton Microlab 600 Series Dual Syringe Dispenser is a semi-automated liquid handling system designed for laboratories requiring high-precision, high-accuracy fluid transfers. Built on Hamilton’s world-renowned syringe technology, it leverages positive-displacement mechanics to ensure consistent performance across a broad range of fluid viscosities and characteristics. Semi-Automated Liquid Handling With a simple touch of the hand probe button or an optional foot switch, users can actuate the dual precision syringe drives to aspirate or dispense exact fluid volumes. This ergonomic control reduces hand fatigue and enhances repeatability in routine workflows. Precision by Design Microlab 600 diluters and dispensers achieve precise and reproducible results through positive-displacement syringe drives that are independent of fluid viscosity, vapor pressure, or temperature. This makes the instrument highly suitable for complex or sensitive fluid-handling tasks such as: Serial dilutions Titrations Standard preparations Reagent distribution Sample aliquoting