Used Ebert Tl 30 St Forst-Spezialtieflader for sale (38,769)

Condition: new, axle configuration: 3 axles, total length: 120,000 mm, total width: 25,500 mm, Equipment: ABS, = Additional Options and Accessories = - Air suspension, rear - Air suspension, front = Notes = Ebert TL 30 ST Forestry Special Lowboy Trailer, completely flat bed, self-supporting construction. Permissible total weight: 30,000 kg, unladen weight: 5,900 kg, payload: 24,100 kg, dimensions 12,000 mm x 2,550 mm (also available in a longer and wider version), fully air-suspended, last axle with trailing linkage, SAF axles. Mr. Ebert (tel. ...) will be happy to assist you. You can find more information on our website. Errors and prior sale are subject to change! Hedpfx Asyfq Afoamonr = Further Information = Unladen weight: 5,900 kg Payload: 24,100 kg GVW: 30,000 kg Please contact Tobias Ebert for further information.

Condition: new, axle configuration: 3 axles, total width: 27,500 mm, Equipment: ABS, Ebert TL 30 ST LB special low-bed trailer, fully flat bed, self-supporting design. Permissible total weight: 30,000 kg, unladen weight: 6,900 kg, payload: 23,100 kg, dimensions: 13,600 mm x 2,750 mm (also available in a standard version), fully air-suspended, last axle with trailing steering, SAF axles. Mr. Ebert (Tel. ...) will be happy to assist you. For further information, please visit our website. Errors and prior sale excepted! = Further information = Please contact Tobias Ebert for more information. Hnodpfx Aaeyfu Ursmsr

Condition: new, axle configuration: > 3 axles, Equipment: ABS, Ebert TL 40 ST special low-loader, continuous flatbed design, self-supporting construction, permissible total weight: 40,000 kg, unladen weight: 8,900 kg, payload: 31,100 kg, dimensions: 14,000 mm x 2,550 mm (also available in a wider version), fully air-suspended, trailing lift axle, SAF axles. Mr. Ebert (Tel. ...) will be happy to assist you. For more information, please visit our website. Errors and prior sale excepted! Hnodpfx Aasyfrfzjmor = Further Information = Please contact Tobias Ebert for more information.

Condition: new, axle configuration: 2 axles, Year of construction: 2021, Equipment: ABS, Technical data for the EBERT TLS 43 ATV special low-loader: Permissible fifth wheel load: 19,000 kg, Permissible axle load: 24,000 kg, Permissible total weight: 43,000 kg, Unladen weight according to DIN: approx. 12,500 kg, Low-bed length i.L.: approx. 6,650 mm + 4,000 mm, Axle center distance: 2,700 mm, Outer width: 2,550 mm, Loading edge/low-bed: approx. 200 mm, 350 mm, Sliding table length: 500 mm, Widening/low-bed to: 3,050 mm, Low-bed/telescopic extension: 4,000 mm, B-dimension: 12,000 mm, Entire vehicle hot-dip galvanized, with epoxy resin primer and 2-component paint finish, Overwidth signage at the front and rear with red/white panels Wheels: 9x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Steering: TRIDEC DLS with Tritronic Axles: 12,000 kg – DLS single-wheel suspension, hydraulically steered and hydraulically sprung Front upper deck: Doors accessible from the outside in the corners on the left and right, storage box with lid behind the front panel, height 600 mm, width 2,480 mm, depth 7,500 mm, spare wheel on the upper deck, behind the partition on the right, ladder on the right side to access the front upper deck from the low-bed, hydraulic coupling for detachment on the left side, 6-way Multi-Faster coupling, 6 lashing points, 3,000 kg design, on the outside of the upper deck / eyelets, 2 lashing points, 5,000 kg design, on top of the longitudinal beams (towards the rear) Low-bed: Climbing aids on the boom - extension, low-bed telescopic extension by 4,000 mm and lockable every 500 mm, with sliding table, lockable every 250 mm, 28 lashing points, 10,000 kg design, on the outside in the outer frame, 24 socket tubes 90x90, evenly distributed for widening the low-bed to 3,050 mm, 50 mm hardwood planks are placed between the extension tubes, 10 mm overhang Rear upper deck: Front upper deck slanted and perforated for retrofitting ramps, galvanized by means of adapters, ramp receiver profiles (Altec) – C rails at the rear, 6 lashing points, 10,000 kg design, on the outside of the upper deck, 6 lashing points, 5,000 kg design, in the excavator well, 8 lashing points, 5,000 kg design, in the case of overwidth in the outer frame, closure of the excavator well at the front and rear with a wood-based floor panel (insertable) Electrical system: NATO connector, power supply from the towing vehicle, rotating beacon at the rear in the middle, side marker lights in LED design, standard tail light for vertical mounting (LC5), work lights on the upper deck to illuminate the low-bed, detachment: sensor for securing and pressure switch for the suspension Air: Aluminum air tank 60l (2x 10l, 2x 20l), TEBS modulator, locking mechanism for extension on the left and right (valve on the side in the rear upper deck), double quick-release valve Hydraulics: Hodpfx Aaeyfvwbemonr Hydraulic system on the upper deck for steering, suspension, and detachable gooseneck Accessories: 2x 4 pieces of wood plank as support for widening the low-bed and intermediate table, 2 pieces of locking wedges for detachment, 4 pieces of support wedges On request, we will provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Ebert (Tel. ) will be happy to assist you. Further information can be found on our homepage. Errors and prior sale excepted! Rental possible = Further information = Unladen weight: 12,500 kg Payload: 30,500 kg GVW: 43,000 kg Contact Tobias Ebert for further information.

Condition: new, axle configuration: 2 axles, Year of construction: 2021, Equipment: ABS, Technical specifications for the EBERT TLS 43 ST special low-loader: Permissible fifth wheel load: 19,000 kg, Permissible axle load: 24,000 kg, Permissible total weight: 43,000 kg, Payload: approx. 32,200 kg, Low-bed length: 9,350 mm, Axle center distance: 2,700 mm, Overall width: 2,550 mm, Loading height/low-bed: approx. 200 mm, 350 mm, Overwidth signage at the front and rear with red/white signs Wheels: 245 / 70 R 17.5 Steering: TRIDEC Axles: 12,000 kg – Gigant axles, hydraulically steered Electrical system: NATO connector used, power supplied by the towing vehicle, rotating beacon at the rear center, side marker lights in LED design, standard rear light for vertical mounting (LC5) Hsdpfx Asyfp Aqsamenr Hydraulics: Hydraulic system on the upper deck for steering Upon request, we can provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Ebert (Tel.) will be happy to assist you. Further information can be found on our website. Errors and prior sale are subject to change! Rental possible = Further information = GVWR: 43,000 kg Please contact Tobias Ebert for further information.

Condition: used, axle configuration: 2 axles, total length: 157,000 mm, total width: 25,500 mm, Year of construction: 2008, Equipment: ABS, = Additional Options and Accessories = - EBS - Electronic Braking System - Air suspension, rear - Air suspension, front = Notes = For inquiries regarding the vehicle, please contact Mr. Seidel (at tel. ). Used EBERT forestry semi-trailer, low-bed trailer, type: TLS 36 ST, VIN: W0985180080D17001 Hnedpfjztltmox Aamjr self-supporting, with ECAS air suspension, fully hydraulically steered with remote control & ABS First registration: 03/2008, Permissible gross weight: 36,000 kg, Saddle load: 16,000 kg, Rear axle load: 20,000 kg, MOT: 01/2007, Low-bed length: 8,750 mm, Length: 15,700 mm, Width: 2,550 mm, Payload approx.: 27,000 kg The forestry machine is transported at a height of approx. 10-25 cm above the road surface. Tires: 235/75R/17.5 low-profile, tubeless. Tire tread: 1st axle 9-12 mm, 2nd axle 7-11 mm Axles: 2 x 10 tons Axles with S-cam brakes and ABS, hydraulically actuated two-circuit forced steering controlled from the kingpin. Saddle plate with 2-inch kingpin and drive-away wedge. 24V electric generator with HD piston pump, oil tank and 2 batteries enable remotely controlled functions via wireless remote control. Brakes: Two-line brake system according to EC with spring-loaded brake cylinders acting on the rear axles. With ABS Lighting according to StVZO (German Road Traffic Licensing Regulations). Integrated into a recessed underrun protection, incl. license plate holder. Also, warning lights in the pull-out marker panels for overwidth transport. The hydraulic forced steering is equipped with a wireless remote control as standard, so the driver can "steer" from the cab in tight hairpin turns and during turning maneuvers. Options included in the price: a. Yellow rotating beacon at the rear, pluggable b. with 4 pull-out marker panels (red/white) with a retracted width of 2,550 mm and an extended width of 2,750 mm or 3,000 mm. c. with electro-hydraulically operated ramps Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (tel. ) will be happy to assist you. Further information can be found on our website. ... Errors, changes and prior sale reserved !!! - Steering axle = Further information = Unladen weight: 9,000 kg Payload: 27,000 kg GVW: 36,000 kg Last inspection: 2027-01 Please contact Tobias Ebert for further information.

Condition: new, axle configuration: 3 axles, Year of construction: 2022, Equipment: ABS, Technical data for the EBERT TLS 43 ATV special low-loader: Permissible saddle pressure: 19,000 kg, Permissible axle load: 36,000 kg, Permissible total weight: 55,000 kg, Unladen weight according to DIN: approx. 15,500 kg, Low-bed length i.L.: approx. 6,650 mm + 4,000 mm, Axle table length: 3,550 mm, External width: 2,550 mm, Loading edge/low-bed: approx. 200 mm, 350 mm, Sliding table length: 500 mm, Extension/low-bed to: 3,050 mm, Low-bed/extendable by: 4,000 mm, B-dimension: 13,300 mm, Entire vehicle hot-dip galvanized, with epoxy primer and 2K paint finish, overwidth signage at the front and rear with red/white panels. Wheels: 13 x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Steering: TRIDEC DLS with Tritronic Axles: 12,000 kg – DLS single-wheel suspension, hydraulically steered and hydraulically sprung Hnsdpfxjyfu N As Aamsr Front upper deck: Sideboards, 600 mm high, corners angled on the front upper deck, doors accessible from the outside in the corners on the left and right, lockable storage box with a lid behind the front wall, height 600 mm, width 2,480 mm, depth 7,500 mm, spare wheel on the upper deck, behind the partition on the right, ladder on the right side to get from the low-bed to the front upper deck, hydraulic coupling for detaching on the left side, 6-way Multi-Faster coupling, 6 tie-down positions, 3,000 kg capacity, on the outside of the upper deck (eye-type tie-down points), 2 tie-down positions, 5,000 kg capacity, on top of the longitudinal beams (towards the rear). Low-bed: Climbing aids on the boom - extension, outer frame t=8 mm, low-bed extendable by 4,000 mm and lockable every 500 mm, with sliding table, lockable every 250 mm, 28 tie-down positions, 10,000 kg capacity, on the outside of the outer frame, 24 insertion pipes 90 x 90, evenly distributed for low-bed extension to 3,050 mm, 50 mm hardwood planks are placed between the extension tubes, 10 mm overhang. Rear upper deck: Upper deck sloping and perforated towards the front, for retrofitting ramp attachment profiles, using adapters with a galvanized finish, ramp attachment profiles (Altec) – C rails at the rear, 8 tie-down positions, 10,000 kg capacity, on the outside of the upper deck, 6 tie-down positions, 5,000 kg capacity, in the excavator well, 10 tie-down positions, 5,000 kg capacity, for overwidth on the outer frame, closure of the excavator well at the front and rear with a wooden floor panel (insertable). Electrical system: Use NATO coil, energy comes from the towing vehicle, revolving beacon at the rear in the middle, side lights in LED version, standard rear light for vertical mounting (LC5), work lights on the upper deck, to illuminate the low-bed, overwidth signage at the front and rear for controlling the detachment, sensor for securing and pressure switch for the suspension. Air: Aluminum air reservoir 80 l, TEBS modulator, locking of extension on the left and right (valve on the side in the rear upper deck), double release valve. Hydraulics: Hydraulic system on the upper deck for steering, suspension and detachable gooseneck. Accessories: 2x 4 pieces of wooden plank as support for extending the low-bed and intermediate table, 2 pieces of securing wedges for detaching, 4 pieces of chock blocks. Upon request, we will provide you with a leasing or financing offer. Mr. Ebert (Tel. ) will be happy to assist you. Further information can be found on our website. Errors and prior sale are excepted! Rental possible GVW: 55,000 kg Please contact...

Condition: new, power: 375 kW (509.86 HP), axle configuration: 6x2, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, loading space length: 62,000 mm, loading space width: 25,000 mm, Year of construction: 2024, Equipment: ABS, EBS, air conditioning, = Additional Options and Accessories = - Braking system = Notes = Front axle 9.0 t, Hydraulic Auxiliary Drive (HAD), Rear axle 13.4 t, Tag axle 8.0 t steered & liftable, Electronic braking system with ABS and ASR, Retarder, Trailer brake 2-line, Wheelbase 4,800 mm, Stabilizer on front axle, Rear underrun protection, Front underrun protection, Air connection in the cab, air-sprung driver comfort suspension seat, functional passenger seat, side sunblind on driver's side, air conditioning, hot water auxiliary heater, circuit breakers, voltage converter 24 V / 12 V, power socket 24V / 25A in the passenger footwell, programmable special module PSM, trailer socket 24V / 15-pin, M-cab StreamSpace 2.30m, comfort cab suspension, sun visor, heated front mirrors, air horn, movable cab access, comfort locking system with central locking, Mercedes PowerShift 3, axle configuration 6x2 with HAD, 26.0-ton vehicle, air suspension rear axle, radio/CD with Bluetooth, axle load measuring device, pre-wiring for CB radio, pre-wiring for toll collection, main tank 510 L, AdBlue tank 60 L, Euro 6, air compressor 2-cylinder, transmission oil cooler, trailer coupling, stability assistant, cruise control, and much more.... Box with hydraulic flaps, length: 6,200 mm, volume: 41 cbm, box KTL-coated, Crane: Palfinger Q170L with 2 hydraulic supports, liftable cabin with auxiliary heater, fully hydraulic double telescopic boom (reach 11.5 m!), oil cooler, rotator, Optional equipment: Hnsdjyfpn Tspfx Aamsr - Timber grapple Epsilon FG53 - GMT 050 with and without TTC - Quick-change system between felling grapple and timber grapple - extendable heavy-duty drawer for timber grapple / felling grapple - Front blade over cab with crane storage Application: Processing and removal of cut timber. Upon request, we will provide you with a leasing or financing offer. Mr. Ebert (Tel. will be happy to assist you. Further information can be found on our website. Errors and prior sale reserved! ESP, auxiliary heater Cab: Long-distance = Further Information = Cabin: High sleeper cab Engine displacement: 12,800 cc GVWR: 26,000 kg Please contact Tobias Ebert for more information.

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 80 V, total height: 627 mm, total length: 1,025 mm, total width: 708 mm, Tested forklift battery for your forklift - 80V 4PZS 500Ah - DIN A + 1 year warranty + Includes Aquamatik filling system + Includes end cell connector & REMA 320 plug (other connectors can be installed upon request) + Capacity: min. 90-100% (C5 capacity protocol will be provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,025 mm Width 708 mm Height 627 mm Weight: approx. 1,210 kg Suitable for the following models and others: Hnedpfsy Rnr Aox Aamjr Linde E 16 P - 386-02 - side battery change Linde E 20 - 1252-01 Linde E 20 - 336-00 Linde E 20 - 387-00 Linde E 20 FLAT - 336-00 Linde E 20 L - 386-00 Linde E 20 R - 387-00 Linde E 25 - 1252-01 Linde E 25 - 387-00 Linde E 25 C - 387-00 Linde E 25 R - 387-00 Linde E 25 RL - 387-00 Linde E 25 S - 1276-00 Linde E 30 - 1252-01 Linde E 30 - 387-00 Linde E 30 - 387-00 - side battery change Linde E 30 / 500 - 387-00 Linde E 30 C - 387-00 Linde E 30 L - 387-00 - side battery change Linde E 30 R - 387-00 Linde E 30 RL - 387-00 Linde E 30 S - 1276-00 Linde P 200 - 370-00 Linde P 250 - 127-00 - vertical battery change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 - side battery change Linde P 250 SWB - 5007-10 - vertical battery change Linde W 20 - 127-00 Linde W 20 - 127-00 - vertical battery change Linde W 20 - 127-06 - overhead battery change Linde W 20 - 5007-10 - side battery change Linde V 20 - 5007-10 - vertical battery change Linde W 30 - 5007-10 - side battery change Linde W 30 - 5007-10 - vertical battery change Toyota 7FBMF16 Toyota 7FBMF18 Atlet EH 25 Clark STE 20 Other common battery sizes available on request. Transport possible.

Condition: new, functionality: fully functional, Year of construction: 2022, overall weight: 150 kg, total height: 2,300 mm, total length: 1,200 mm, total width: 600 mm, controller model: SPS-Steuerung, working width: 300 mm, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 6 bar, load capacity per stand: 50 kg, number of drawers: 1, positioning accuracy: 1 mm, working height: 30 mm, working length: 400 mm, working range: 400 mm, Equipment: CE marking, safety light barrier, Feeding and storage system for light articles in trays. Feeding of trays for magazine storage in automated production. Especially for surface or contour sensitive parts. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm. • Fast tray change time (4-8 seconds) • Tray weight incl. workpieces max. 5kg • Tray stacker weight max. 50kg • Positioning accuracy ± 1mm Hnjdpoyx Hgbsfx Aamor • PLC control with operating and monitoring display • ESD equipment • Safety package light curtain - Leuze for tray stacker • Preparation communication AGV - Siemens IWLAN client • RFID read-write head • Autonomy time increase 1 stack • Machine safety: active door interlock • Low space requirement, due to compact design • Flexible adaptation to different machines, due to different interfaces • Low investment costs • Complete equipment • Stable design • (solid steel construction, powder coated) • No machine adapters necessary • Supply voltage 400V / 50Hz / 3ph • Compressed air connection min. 6bar • Dimension: 1200 x 600 x 2300mm (LWH)

Condition: new, functionality: fully functional, Year of construction: 2022, overall weight: 150 kg, total height: 2,300 mm, total length: 1,200 mm, total width: 600 mm, load capacity per stand: 5 kg, working range: 400 mm, Feeding and storage system for light articles in trays. Feeding of trays for magazine storage in automated production. Especially for surface or contour sensitive parts. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm. • Fast tray change time (4-8 seconds) • Tray weight incl. workpieces max. 5kg • Tray stacker weight max. 50kg • Positioning accuracy ± 1mm • PLC control with operating and monitoring display • ESD equipment • Safety package light curtain - Leuze for tray stacker • Preparation communication AGV - Siemens IWLAN client • RFID read-write head • Autonomy time increase 1 stack • Machine safety: active door interlock • Low space requirement, due to compact design • Flexible adaptation to different machines, due to different interfaces Hsdsxrgkwspfx Aamjnr • Low investment costs • Complete equipment • Stable design • (solid steel construction, powder coated) • No machine adapters necessary • Supply voltage 400V / 50Hz / 3ph • Compressed air connection min. 6bar • Dimension: 1200 x 600 x 2300mm (LWH)

Condition: new, Year of construction: 2024, functionality: fully functional, total width: 600 mm, total length: 1,200 mm, total height: 2,300 mm, overall weight: 150 kg, type of input current: three-phase, input voltage: 400 V, working range: 400 mm, product height (max.): 30 mm, warranty duration: 12 months, controller model: SPS-Steuerung Siemens Simatic HMI, input frequency: 50 Hz, compressed air connection: 6 bar, load capacity per stand: 50 kg, positioning accuracy: 1 mm, Equipment: CE marking, documentation/manual, lighting, safety light barrier, Feeding and storage system for light articles in trays. Feeding of trays for magazine storage in automated production. Especially for surface or contour sensitive parts. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm. • Fast tray change time (4-8 seconds) • Tray weight incl. workpieces max. 5kg • Tray stacker weight max. 50kg • Positioning accuracy ± 1mm • PLC control with operating and monitoring display • ESD equipment Hnedeyycqxopfx Aamjr • Safety package light curtain - Leuze for tray stacker • Preparation communication AGV - Siemens IWLAN client • RFID read-write head • Autonomy time increase 1 stack • Machine safety: active door interlock • Low space requirement, due to compact design • Flexible adaptation to different machines, due to different interfaces • Low investment costs • Complete equipment • Stable design • (solid steel construction, powder coated) • No machine adapters necessary • Supply voltage 400V / 50Hz / 3ph • Compressed air connection min. 6bar • Dimension: 1200 x 600 x 2300mm (LWH)

Condition: used, SMA Sunny Tripower STP 25000TL-30 Solar Inverter, 25 kW Available quantity: 11 units Manufacturer: SMA Solar Technology AG Model: Sunny Tripower STP 25000TL-30 Device type: Solar inverter Condition: used Year of manufacture: 2016 Rated AC power: 25,000 W Apparent power: 25,000 VA DC maximum voltage: 1,000 V MPPT voltage range: 390–800 V Hnsdpfxszn Ayts Aamsr Max. DC input current: 33 A / 33 A Max. PV short-circuit current: 43 A / 43 A AC rated voltage: 380 / 400 / 415 V (3~) Grid frequency: 50 / 60 Hz Max. AC output current: 36.2 A Degree of protection: IP65 Protection class: I Surge voltage category: III Weight: max. 61 kg

Condition: used, Year of construction: 2007, functionality: fully functional, The tempering units from the company Single are for sale. All three units are water-cooled models with different specifications: Medium: Water 1. STL 1-9-B5/20-TK6, 9 kW heating capacity and 20 kW cooling capacity Hnedpsziwlgefx Aamjr 2. STL1-12-30-TKN4, 12 kW heating capacity and 30 kW cooling capacity 3. STL1-12-30-TKN4

Condition: new, Year of construction: 2022, Warehouse number: 100547099 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Cutting width: 300mm Mount: Martin SW020 Capacity: 60L Weight: 64kg Year of manufacture: 2022 Hodpfx Aajzk Afbjmsnr Class: up to 3.5 tons Location: Passau BG: 06

Condition: new, Year of construction: 2021, Storage location number: 100522561 Transport dimensions (L x W x H): 0 x 0 x 0 Hsdpfx Aajzk Ad Rsmsnr ---- Cutting width: 300mm Mounting: Martin SW010 Capacity: 45L Weight: 50kg Class: up to 2.6 tons Year of manufacture: 2021 Location: Passau BG:

Condition: new, Year of construction: 2022, Warehouse number: 100551917 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Cutting width: 300mm Mount: Martin SW010 Hnedpfx Aszkzqcsamer Capacity: 45L Weight: 50kg Class: up to 2.6 tons Year of manufacture: 2022 Location: Passau BG: 02

Condition: new, Year of construction: 2022, Storage location number: 100551918 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Cutting width: 300mm Mounting: Martin SW010 Capacity: 45L Hjdpezkzp Ejfx Aamsnr Weight: 50kg Class: up to 2.6 tons Year of manufacture: 22 Location: Passau BG:

Condition: new, Year of construction: 2022, Warehouse number: 100564216 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Cutting width: 300mm Capacity: 45L Weight: 47kg Mounting: Martin SW010 Year of manufacture: 22 Class: up to 2.8 tons Location: Passau BG: Hnsdpfx Aaezkzqiomor

Condition: new, Year of construction: 2022, Storage location number: 100564215 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Cutting width: 300mm Mounting: SW010 Capacity: 45L Weight: 47kg Hjdpfszkzqvsx Aamenr Load capacity: up to 2.6 tons Year of manufacture: 2022 Location: Passau BG: 02

Condition: new, Year of construction: 2022, Storage location number: 100551916 Transport dimensions (L x W x H): 0 x 0 x 0 Cutting width: 300mm Mounting: Martin SW010 Hodpfx Aaozkzkpsmjnr Capacity: 45L Weight: 50kg Class: up to 2.6 tons Year of manufacture: 2022 Location: Passau BG:

Condition: new, mileage: 420 km, power: 375 kW (509.86 HP), axle configuration: 6x2, color: green, driver cabin: day cab, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, = Further options and accessories = - Brake system = Notes = Arocs 2751 6x2 HAD - pre-equipped for forestry crane operation!! Front axle 9.0 t, Hydraulic Auxiliary Drive (HAD), rear axle 13.4 t, steering and liftable trailing axle 8.0 t, electronic brake system with ABS and ASR, retarder, two-line trailer brake, wheelbase 4,800 mm, stabilizer on front axle, extendable rear underrun protection, front underrun protection, compressed air connection in cab, air-suspended driver’s comfort swing seat, functional passenger seat, air conditioning, transparent external sun visor, comfort steel-spring cab suspension, M-Cab ClassicSpace, reinforced end cross member, interactive multimedia cockpit, navigation system, LED fog lights, construction rear lights, 2 low LED revolving beacons, body: Hyva-Lift roll-off tipper 20-60 Titan, hook height: 1,570 mm, container length: 4,500 mm to 7,000 mm, lifting force: 200 kN, container with crane platform, capacity: approx. 30 cbm, container length 7,000 mm, recessed hook, foldable protection roof 2,000 mm with hand pump, crane: Epsilon Q150L, crane cabin available on request, length: 9.7 m Application area: Processing and transport of cut material. We will be happy to provide you with a leasing or financing offer from Mercedes-Benz Bank on request. Mr. Ebert and Mr. Seidel (Tel. ...) will be pleased to assist you. For further information, please visit our homepage. !Subject to changes, errors, and prior sale! ESP, navigation system Cabin: Local traffic = Further information = Engine displacement: 12,809 cc Please contact Tobias Ebert for further information. Hjdpfx Ajyfqvfsamonr

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 680 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,642 mm, fuel type: diesel, mast type: triplex, construction height: 2,400 mm, power: 37 kW (50.31 HP), fork length: 1,200 mm, empty load weight: 4,780 kg, total length: 3,189 mm, drive type: Diesel, construction width: 1,350 mm, Rough terrain forklift Hnedpfxovuck Ne Aamer Load centre: 500 Fork width: 120 mm Fork thickness: 45 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: very good Front tyre type: Pneumatic Front tyre condition: 80 - 100% Rear tyre type: Pneumatic Rear tyre condition: 80 - 100% Sideshift, 3rd valve, rear work light, front work light, heating, full cabin, beacon,

Condition: ready for operation (used), functionality: fully functional, input voltage: 380 V, spindle mount: MK 3, total width: 600 mm, total length: 900 mm, total height: 1,900 mm, table width: 400 mm, table length: 550 mm, overall weight: 360 kg, spindle speed (max.): 2,800 rpm, spindle speed (min.): 160 rpm, spindle stroke: 150 mm, Equipment: rotational speed infinitely variable, type plate available, 3-phase 380V, 2-speed motor is running fine. Stepless speed adjustment thanks to variomatic spindle drive. Spindle RPM adjustable from 160 up to 2800. MT3 spindle taper. Albrecht 1-13mm drill chuck included. Chuck eject tool included. Drilling depth adjustable. Maximum drilling depth: 150mm Table size: 550x400mm Table height adjustable. Weight: 360KG Overall dimensions: 90x60x190cm Made in Germany Overall good condition. Contact us for shipping possibilities! Hsdpfswy Ec Djx Aamonr € 2,350.00

Condition: new, Year of construction: 2023, operating hours: 3 h, functionality: fully functional, machine/vehicle number: D 25217, overall weight: 970 kg, fuel type: diesel, tank capacity: 210 l, color: grey-black, power: 29 kW (39.43 HP), output current: 63 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 26.4 kW (35.89 HP), nominal power (apparent): 33 kVA, continuous power: 24 kW (32.63 HP), continuous power (apparent): 30 kVA, total length: 2,000 mm, total width: 115 mm, total height: 1,490 mm, rotational speed (max.): 1,800 rpm, motor manufacturer: Mitsubishi, type of cooling: water, number of cylinders: 4, Equipment: CE marking, ## FOGO Generator Set 30/33 kVA – Mitsubishi Engine – Leroy Somer Generator – Soundproofed ### Manufacturer FOGO ### Engine * Manufacturer: Mitsubishi (Japan) Hodpfozk Dt Tox Aamsnr * Model: S4S-61SD * Emission Standard: Stage II * 4-cylinder diesel engine * Water-cooled * Rated speed: 1,500 rpm ### Generator * Manufacturer: Leroy Somer (France) * Power: 30 / 33 kVA * Voltage: 230 / 400 V * Frequency: 50 Hz * AVR voltage regulation ### Control System ComAp InteliLite AMF25 * Digital control and start unit * Automatic mains monitoring (AMF) * Automatic start function (for ATS box) * Display of voltage, current, frequency, and power (kW) * Engine monitoring * Operating hour counter * Maintenance interval display * Integrated battery charger ### Technical Data * Dimensions: 200 × 113 cm * Weight: 970 kg * Fuel tank capacity: 210 liters * Sound level: approx. 66 dB(A) at a distance of 7 m * Fuel consumption: * 4.4 l/h at 50% load * 6.4 l/h at 75% load * Integrated spill containment tray for fluids: approx. 50 liters ### Scope of Delivery * FOGO generator set 30/33 kVA * Soundproof enclosure * Digital control system * Fuel tank * Starter battery * Exhaust with silencer * Socket package (SOM) included ### Optional Accessories * ATS box (Automatic Mains Failure / Automatic Transfer Switch) available. * Additional cost: €2,400 * Delivery time: approx. 4–8 weeks ### Display Messages Maintenance / Service * The maintenance indicator is based on the operating hours and days set at the factory. Since the engine still contains the original factory oil, the maintenance indicator can be reset if desired. Warning Charger * This message appears because the integrated battery charger and the engine/coolant pre-heater are currently not connected to an external 230 V power supply. After connecting the mains power supply, the message will disappear. Inspection and test run are possible at any time by appointment. We are happy to answer any further questions by telephone or message.