Used Ebert Tl 30 St Lb Forst-Spezialtieflader for sale (40,280)

Condition: new, axle configuration: 3 axles, total width: 27,500 mm, Equipment: ABS, Ebert TL 30 ST LB special low-bed trailer, fully flat bed, self-supporting design. Permissible total weight: 30,000 kg, unladen weight: 6,900 kg, payload: 23,100 kg, dimensions: 13,600 mm x 2,750 mm (also available in a standard version), fully air-suspended, last axle with trailing steering, SAF axles. Mr. Ebert (Tel. ...) will be happy to assist you. For further information, please visit our website. Errors and prior sale excepted! Bledpfjyfu Urjx Ahmon = Further information = Please contact Tobias Ebert for more information.

Condition: new, axle configuration: 3 axles, total length: 120,000 mm, total width: 25,500 mm, Equipment: ABS, = Additional Options and Accessories = - Air suspension, rear - Air suspension, front = Notes = Ebert TL 30 ST Forestry Special Lowboy Trailer, completely flat bed, self-supporting construction. Permissible total weight: 30,000 kg, unladen weight: 5,900 kg, payload: 24,100 kg, dimensions 12,000 mm x 2,550 mm (also available in a longer and wider version), fully air-suspended, last axle with trailing linkage, SAF axles. Mr. Ebert (tel. ...) will be happy to assist you. You can find more information on our website. Errors and prior sale are subject to change! = Further Information = Unladen weight: 5,900 kg Payload: 24,100 kg Blsdpfx Asyfq Afohmjn GVW: 30,000 kg Please contact Tobias Ebert for further information.

Condition: new, axle configuration: > 3 axles, Equipment: ABS, Ebert TL 40 ST special low-loader, continuous flatbed design, self-supporting construction, permissible total weight: 40,000 kg, unladen weight: 8,900 kg, payload: 31,100 kg, dimensions: 14,000 mm x 2,550 mm (also available in a wider version), fully air-suspended, trailing lift axle, SAF axles. Mr. Ebert (Tel. ...) will be happy to assist you. For more information, please visit our website. Errors and prior sale excepted! = Further Information = Please contact Tobias Ebert for more information. Blodoyfrfzjpfx Ahmsn

Condition: used, axle configuration: 2 axles, total length: 157,000 mm, total width: 25,500 mm, Year of construction: 2008, Equipment: ABS, = Additional Options and Accessories = - EBS - Electronic Braking System - Air suspension, rear - Air suspension, front = Notes = For inquiries regarding the vehicle, please contact Mr. Seidel (at tel. ). Used EBERT forestry semi-trailer, low-bed trailer, type: TLS 36 ST, VIN: W0985180080D17001 self-supporting, with ECAS air suspension, fully hydraulically steered with remote control & ABS First registration: 03/2008, Permissible gross weight: 36,000 kg, Saddle load: 16,000 kg, Rear axle load: 20,000 kg, MOT: 01/2007, Low-bed length: 8,750 mm, Length: 15,700 mm, Width: 2,550 mm, Payload approx.: 27,000 kg The forestry machine is transported at a height of approx. 10-25 cm above the road surface. Tires: 235/75R/17.5 low-profile, tubeless. Tire tread: 1st axle 9-12 mm, 2nd axle 7-11 mm Axles: 2 x 10 tons Axles with S-cam brakes and ABS, hydraulically actuated two-circuit forced steering controlled from the kingpin. Saddle plate with 2-inch kingpin and drive-away wedge. 24V electric generator with HD piston pump, oil tank and 2 batteries enable remotely controlled functions via wireless remote control. Brakes: Two-line brake system according to EC with spring-loaded brake cylinders acting on the rear axles. With ABS Lighting according to StVZO (German Road Traffic Licensing Regulations). Integrated into a recessed underrun protection, incl. license plate holder. Also, warning lights in the pull-out marker panels for overwidth transport. The hydraulic forced steering is equipped with a wireless remote control as standard, so the driver can "steer" from the cab in tight hairpin turns and during turning maneuvers. Options included in the price: a. Yellow rotating beacon at the rear, pluggable Blodpfx Aoz Engkshmon b. with 4 pull-out marker panels (red/white) with a retracted width of 2,550 mm and an extended width of 2,750 mm or 3,000 mm. c. with electro-hydraulically operated ramps Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (tel. ) will be happy to assist you. Further information can be found on our website. ... Errors, changes and prior sale reserved !!! - Steering axle = Further information = Unladen weight: 9,000 kg Payload: 27,000 kg GVW: 36,000 kg Last inspection: 2027-01 Please contact Tobias Ebert for further information.

Condition: new, axle configuration: 2 axles, Year of construction: 2021, Equipment: ABS, Technical specifications for the EBERT TLS 43 ST special low-loader: Permissible fifth wheel load: 19,000 kg, Permissible axle load: 24,000 kg, Permissible total weight: 43,000 kg, Payload: approx. 32,200 kg, Low-bed length: 9,350 mm, Axle center distance: 2,700 mm, Overall width: 2,550 mm, Loading height/low-bed: approx. 200 mm, 350 mm, Overwidth signage at the front and rear with red/white signs Wheels: 245 / 70 R 17.5 Steering: TRIDEC Axles: 12,000 kg – Gigant axles, hydraulically steered Electrical system: NATO connector used, power supplied by the towing vehicle, rotating beacon at the rear center, side marker lights in LED design, standard rear light for vertical mounting (LC5) Hydraulics: Hydraulic system on the upper deck for steering Upon request, we can provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Ebert (Tel.) will be happy to assist you. Further information can be found on our website. Errors and prior sale are subject to change! Bsdpfoyfp Aqsx Ahmoln Rental possible = Further information = GVWR: 43,000 kg Please contact Tobias Ebert for further information.

Condition: good (used), Year of construction: 2012, HAAS ST-30 CNC lathe with C-axis and driven tools Year: 2012 Technical details: Swing diameter 806mm, Maximum cutting diameter 533mm, Distance between centres 762 mm Maximum cutting length 660 mm Bar capacity 76 mm Spindle Motor 22,4 kW Max spindle speed 3400 rpm Bledpezz Agtefx Ahmon C-axis and driven tools Turret 12 positions Tailstock Accessories/options: 1 axial driven tool holder 1 radial driven tool holder 10 pieces static tool holders Tool presetter, Renishaw Foot pedal for chuck and tailstock operating Coolant tank Swarf conveyor Under power in our warehouse.

Condition: excellent (used), Year of construction: 2019, HAAS ST-30 – 2019 – BMT65 / driven tools / C-axis / only 1385 cutting hours For sale: HAAS ST-30 CNC turning center, manufactured in 2019. Bledpjz D E Ayofx Ahmjn The machine is in very good technical and visual condition, with very low operating hours – only 1385 hours of actual cutting time. A rich configuration including a BMT65 tool turret, driven tools, and a C-axis allows for not only turning operations but also milling, drilling, and threading without the need to transfer the workpiece to another machine. TECHNICAL DATA * Manufacturer: HAAS Automation * Model: ST-30 * Year of manufacture: 2019 * Date of manufacture: 07/2019 * Control: HAAS CNC * Chuck: 254 mm / 10” * Spindle nose: A2-6 * Maximum spindle speed: 3400 rpm * Spindle power: 22.4 kW / 30 HP * Maximum torque: 407 Nm at 500 rpm * Maximum bar diameter: 76 mm * Spindle bore diameter: 88.9 mm * Tool turret: BMT65 * Driven tools * C-axis * Hydraulic tailstock * Machine without Y-axis WORKING RANGE * X-axis travel: 324 mm * Z-axis travel: 660 mm * Maximum workpiece diameter above frontrest: 806 mm * Maximum machining diameter with BMT65 turret: 457 mm * Maximum machining length: 660 mm * Maximum bar diameter: 76 mm * Distance between centers: approx. 762 mm EQUIPMENT * BMT65 turret * Driven tools * C-axis * Tool probe * Hydraulic tailstock * High-pressure coolant system * Through-tool coolant * Belt chip conveyor * Mist collector/filtration system * Rigid tapping * Spindle orientation M19 * VPS – Visual Programming System * Wireless network * 1 GB memory * Compensation tables MACHINE HOURS Data read directly from the control: * Power-on time: 13,052 h * Cycle time: 1,764 h * Actual cutting time: only 1,385 h Please send a specific price offer.

Condition: new, axle configuration: 2 axles, Year of construction: 2021, Equipment: ABS, Technical data for the EBERT TLS 43 ATV special low-loader: Permissible fifth wheel load: 19,000 kg, Permissible axle load: 24,000 kg, Permissible total weight: 43,000 kg, Unladen weight according to DIN: approx. 12,500 kg, Low-bed length i.L.: approx. 6,650 mm + 4,000 mm, Axle center distance: 2,700 mm, Outer width: 2,550 mm, Loading edge/low-bed: approx. 200 mm, 350 mm, Sliding table length: 500 mm, Widening/low-bed to: 3,050 mm, Low-bed/telescopic extension: 4,000 mm, B-dimension: 12,000 mm, Entire vehicle hot-dip galvanized, with epoxy resin primer and 2-component paint finish, Overwidth signage at the front and rear with red/white panels Wheels: 9x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Steering: TRIDEC DLS with Tritronic Axles: 12,000 kg – DLS single-wheel suspension, hydraulically steered and hydraulically sprung Front upper deck: Doors accessible from the outside in the corners on the left and right, storage box with lid behind the front panel, height 600 mm, width 2,480 mm, depth 7,500 mm, spare wheel on the upper deck, behind the partition on the right, ladder on the right side to access the front upper deck from the low-bed, hydraulic coupling for detachment on the left side, 6-way Multi-Faster coupling, 6 lashing points, 3,000 kg design, on the outside of the upper deck / eyelets, 2 lashing points, 5,000 kg design, on top of the longitudinal beams (towards the rear) Low-bed: Climbing aids on the boom - extension, low-bed telescopic extension by 4,000 mm and lockable every 500 mm, with sliding table, lockable every 250 mm, 28 lashing points, 10,000 kg design, on the outside in the outer frame, 24 socket tubes 90x90, evenly distributed for widening the low-bed to 3,050 mm, 50 mm hardwood planks are placed between the extension tubes, 10 mm overhang Rear upper deck: Bodsyfvwbspfx Ahmsln Front upper deck slanted and perforated for retrofitting ramps, galvanized by means of adapters, ramp receiver profiles (Altec) – C rails at the rear, 6 lashing points, 10,000 kg design, on the outside of the upper deck, 6 lashing points, 5,000 kg design, in the excavator well, 8 lashing points, 5,000 kg design, in the case of overwidth in the outer frame, closure of the excavator well at the front and rear with a wood-based floor panel (insertable) Electrical system: NATO connector, power supply from the towing vehicle, rotating beacon at the rear in the middle, side marker lights in LED design, standard tail light for vertical mounting (LC5), work lights on the upper deck to illuminate the low-bed, detachment: sensor for securing and pressure switch for the suspension Air: Aluminum air tank 60l (2x 10l, 2x 20l), TEBS modulator, locking mechanism for extension on the left and right (valve on the side in the rear upper deck), double quick-release valve Hydraulics: Hydraulic system on the upper deck for steering, suspension, and detachable gooseneck Accessories: 2x 4 pieces of wood plank as support for widening the low-bed and intermediate table, 2 pieces of locking wedges for detachment, 4 pieces of support wedges On request, we will provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Ebert (Tel. ) will be happy to assist you. Further information can be found on our homepage. Errors and prior sale excepted! Rental possible = Further information = Unladen weight: 12,500 kg Payload: 30,500 kg GVW: 43,000 kg Contact Tobias Ebert for further information.

Condition: used, functionality: fully functional, Year of construction: 2019, machine/vehicle number: 53, overall weight: 38,500 kg, input voltage: 400 V, input current: 355 A, input frequency: 50 Hz, broaching speed: 12 m/min, workpiece diameter (max.): 225 mm, total length: 7,100 mm, total width: 11,560 mm, total height: 6,000 mm, Forst RISH 60 x 2125 x 630 – Vertical internal broaching machine Used Forst broaching machine for internal broaching of ring gear workpieces. The machine features a lifting table and a servo-electric broaching drive; the broach pitch is set via the NC program. Machining is performed individually or in pairs, depending on the workpiece. Identification Manufacturer: Forst Technologie GmbH & Co. KG Type: RISH 60 x 2125 x 630 Factory number: 53 Forst order number: M233202 Reference / Inventory number: 351024 Year of manufacture: 2019 (according to machine data sheet) Technical data according to machine documentation - Maximum tensile force: 600 kN - Maximum stroke: 2,125 mm - Maximum cutting speed: 12 m/min - Return stroke speed: 20 m/min - Maximum workpiece diameter: 225 mm - Maximum workpiece height: 50 mm - Maximum tool diameter: 200 mm - Tool shank diameter: 80 mm - Tool tip diameter: 75 mm - Overall dimensions (L x W x H): approx. 7,100 x 11,560 x 6,000 mm - Total weight of the machine: approx. 38,500 kg - Weight of the base machine: approx. 34,500 kg - Electrical connection: 400 V, 3 phases, 50 Hz - Rated current according to nameplate: 355 A Documented features - Siemens SINUMERIK 840D sl / S7-300 - Operator panel OP012 and hand-held operating unit HT8 - SKF roller screw drive and linear guides Bedpez Hq Akefx Ahmeln - Hydraulic workpiece clamping - Coolant system with high/low pressure supply and 1,800-liter tank - Chip conveyor and chip centrifuge - Oil mist separator and central lubrication system Operating manual and technical documentation are available. The data and features listed describe the documented machine condition. The actual scope of supply should be agreed upon before finalization. The suitability for other workpieces requires a technical assessment and, if necessary, adapted tools and fixtures. Used machine, operated without malfunctions until disassembly. Price on request.

Condition: good (used), Year of construction: 2011, Swing 806mm, maximum cutting diameter 533mm, 762mm between centres, 660mm maximum cutting length, 76mm Bar capacity, 254mm 3 jaw chuck, 22.4kW Spindle Motor, Bledpjywuvhefx Ahmen 3400rpm spindle, 12 Station turret, tailstock, coolant, tool setter.

Condition: new, functionality: fully functional, Year of construction: 2022, overall weight: 150 kg, total height: 2,300 mm, total length: 1,200 mm, total width: 600 mm, load capacity per stand: 5 kg, working range: 400 mm, Feeding and storage system for light articles in trays. Feeding of trays for magazine storage in automated production. Especially for surface or contour sensitive parts. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm. • Fast tray change time (4-8 seconds) • Tray weight incl. workpieces max. 5kg • Tray stacker weight max. 50kg • Positioning accuracy ± 1mm • PLC control with operating and monitoring display • ESD equipment • Safety package light curtain - Leuze for tray stacker • Preparation communication AGV - Siemens IWLAN client • RFID read-write head • Autonomy time increase 1 stack • Machine safety: active door interlock • Low space requirement, due to compact design • Flexible adaptation to different machines, due to different interfaces • Low investment costs • Complete equipment • Stable design • (solid steel construction, powder coated) • No machine adapters necessary • Supply voltage 400V / 50Hz / 3ph • Compressed air connection min. 6bar Bedsxrgkwspfx Ahmeln • Dimension: 1200 x 600 x 2300mm (LWH)

Condition: new, functionality: fully functional, Year of construction: 2022, overall weight: 150 kg, total height: 2,300 mm, total length: 1,200 mm, total width: 600 mm, controller model: SPS-Steuerung, working width: 300 mm, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 6 bar, load capacity per stand: 50 kg, number of drawers: 1, positioning accuracy: 1 mm, working height: 30 mm, working length: 400 mm, working range: 400 mm, Equipment: CE marking, safety light barrier, Feeding and storage system for light articles in trays. Feeding of trays for magazine storage in automated production. Especially for surface or contour sensitive parts. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm. • Fast tray change time (4-8 seconds) • Tray weight incl. workpieces max. 5kg • Tray stacker weight max. 50kg • Positioning accuracy ± 1mm • PLC control with operating and monitoring display • ESD equipment • Safety package light curtain - Leuze for tray stacker • Preparation communication AGV - Siemens IWLAN client • RFID read-write head • Autonomy time increase 1 stack • Machine safety: active door interlock • Low space requirement, due to compact design • Flexible adaptation to different machines, due to different interfaces Blodpeyx Hgbefx Ahmjn • Low investment costs • Complete equipment • Stable design • (solid steel construction, powder coated) • No machine adapters necessary • Supply voltage 400V / 50Hz / 3ph • Compressed air connection min. 6bar • Dimension: 1200 x 600 x 2300mm (LWH)

Condition: new, axle configuration: 3 axles, Year of construction: 2022, Equipment: ABS, Technical data for the EBERT TLS 43 ATV special low-loader: Permissible saddle pressure: 19,000 kg, Permissible axle load: 36,000 kg, Permissible total weight: 55,000 kg, Unladen weight according to DIN: approx. 15,500 kg, Low-bed length i.L.: approx. 6,650 mm + 4,000 mm, Axle table length: 3,550 mm, External width: 2,550 mm, Loading edge/low-bed: approx. 200 mm, 350 mm, Sliding table length: 500 mm, Extension/low-bed to: 3,050 mm, Low-bed/extendable by: 4,000 mm, B-dimension: 13,300 mm, Entire vehicle hot-dip galvanized, with epoxy primer and 2K paint finish, overwidth signage at the front and rear with red/white panels. Wheels: 13 x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Steering: TRIDEC DLS with Tritronic Axles: 12,000 kg – DLS single-wheel suspension, hydraulically steered and hydraulically sprung Front upper deck: Sideboards, 600 mm high, corners angled on the front upper deck, doors accessible from the outside in the corners on the left and right, lockable storage box with a lid behind the front wall, height 600 mm, width 2,480 mm, depth 7,500 mm, spare wheel on the upper deck, behind the partition on the right, ladder on the right side to get from the low-bed to the front upper deck, hydraulic coupling for detaching on the left side, 6-way Multi-Faster coupling, 6 tie-down positions, 3,000 kg capacity, on the outside of the upper deck (eye-type tie-down points), 2 tie-down positions, 5,000 kg capacity, on top of the longitudinal beams (towards the rear). Low-bed: Climbing aids on the boom - extension, outer frame t=8 mm, low-bed extendable by 4,000 mm and lockable every 500 mm, with sliding table, lockable every 250 mm, 28 tie-down positions, 10,000 kg capacity, on the outside of the outer frame, 24 insertion pipes 90 x 90, evenly distributed for low-bed extension to 3,050 mm, 50 mm hardwood planks are placed between the extension tubes, 10 mm overhang. Rear upper deck: Upper deck sloping and perforated towards the front, for retrofitting ramp attachment profiles, using adapters with a galvanized finish, ramp attachment profiles (Altec) – C rails at the rear, 8 tie-down positions, 10,000 kg capacity, on the outside of the upper deck, 6 tie-down positions, 5,000 kg capacity, in the excavator well, 10 tie-down positions, 5,000 kg capacity, for overwidth on the outer frame, closure of the excavator well at the front and rear with a wooden floor panel (insertable). Electrical system: Use NATO coil, energy comes from the towing vehicle, revolving beacon at the rear in the middle, side lights in LED version, standard rear light for vertical mounting (LC5), work lights on the upper deck, to illuminate the low-bed, overwidth signage at the front and rear for controlling the detachment, sensor for securing and pressure switch for the suspension. Air: Aluminum air reservoir 80 l, TEBS modulator, locking of extension on the left and right (valve on the side in the rear upper deck), double release valve. Hydraulics: Hydraulic system on the upper deck for steering, suspension and detachable gooseneck. Accessories: 2x 4 pieces of wooden plank as support for extending the low-bed and intermediate table, 2 pieces of securing wedges for detaching, 4 pieces of chock blocks. Upon request, we will provide you with a leasing or financing offer. Mr. Ebert (Tel. ) will be happy to assist you. Further information can be found on our website. Errors and prior sale are excepted! Rental possible GVW: 55,000 kg Please contact... Bledpjyfu N Asfx Ahmon

Year of construction: 2003, condition: good (used), machine/vehicle number: S3042, For direct extraction of blocks in the quarry Vertical and horizontal cutting Blsdpfjxb D Apex Ahmsn Guide 2755 mm Useful cutting length 2310 mm (see more or less) 4 automatic leveling cylinders 12 m of rails In good working condition. Dismantled, loaded onto truck. Contact by phone in French, by email in your language.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: AC, input voltage: 400 V, input frequency: 50 Hz, LiSEC – PKL, SBL, ATL, LBR, GFB-60/30 RE-S, VB-45 Float (Low-E) and Laminated Glass Cutting Line with mobile overhead crane (gantry) with rotating suction frame Bledpfxoy Rulie Ahmsn for automatic pick-up of large-sized glass sheets (jumbo) and automatically movable shelf rack storage systems (LBR). Construction year: 2008 Max. glass size: 6000 x 3210 mm In good condition. Inspection is possible by appointment. Available: NOW

Condition: used, Year of construction: 2009, machine/vehicle number: PRJ 040485, functionality: fully functional, rotational speed (max.): 4,300 rpm, rotational speed (min.): 225 rpm, overall weight: 260 kg, Equipment: CE marking, The ALZMETALL ALZSTAR 30/S is a robust, precise, and durable pillar drilling machine, particularly suitable for craft businesses, training workshops, and industrial workshops. It belongs to Alzmetall's more price-sensitive "Start-Up" series but still offers the manufacturer's accustomed industrial quality. Here are the most important technical data and features at a glance: Technical Data Feature Value / Specification Drilling capacity (in steel St 60) 30 mm Drilling capacity (in cast iron GG 20) 30 mm Thread cutting max. M 16 (steel) / M 20 (cast iron) Spindle mount MK 3 (short spindle) Spindle stroke (Z-axis) 140 mm Overhang 293 mm Column diameter 115 mm Machine table (support surface) 515 x 360 mm (with T-slots) Bljdpfszdqdlex Ahmon Distance spindle - table min. 132 mm / max. 724 mm Feed By hand Motor power 1.0 / 1.6 kW Spindle speed (stepless) Depending on the option: 225 – 4,300 rpm or 100 – 1,800 rpm Machine weight approx. 260 kg Standard equipment & highlights Stepless speed adjustment: The speed can be adjusted steplessly using a mechanical variator, allowing for optimal adaptation to the respective material and drill diameter. Digital speed display: The current spindle speed is displayed clearly on the front of the machine. Thread cutting device: An integrated reversing switch enables quick switching between right-hand and left-hand rotation. Safety: The machine is equipped as standard with a locking mushroom-head push button for EMERGENCY STOP, a motor protection switch, and an electrically secured spindle guard. Note: Sold without warranty or guarantee. We assume no liability for the operational functionality of the machine. The sale is made excluding any liability for material defects, to the extent permitted by law.

Condition: new, Year of construction: 2024, functionality: fully functional, total width: 600 mm, total length: 1,200 mm, total height: 2,300 mm, overall weight: 150 kg, type of input current: three-phase, input voltage: 400 V, working range: 400 mm, product height (max.): 30 mm, warranty duration: 12 months, controller model: SPS-Steuerung Siemens Simatic HMI, input frequency: 50 Hz, compressed air connection: 6 bar, load capacity per stand: 50 kg, positioning accuracy: 1 mm, Equipment: CE marking, documentation/manual, lighting, safety light barrier, Feeding and storage system for light articles in trays. Feeding of trays for magazine storage in automated production. Especially for surface or contour sensitive parts. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm. • Fast tray change time (4-8 seconds) • Tray weight incl. workpieces max. 5kg • Tray stacker weight max. 50kg • Positioning accuracy ± 1mm • PLC control with operating and monitoring display • ESD equipment • Safety package light curtain - Leuze for tray stacker • Preparation communication AGV - Siemens IWLAN client • RFID read-write head • Autonomy time increase 1 stack Bjdpfxeyycqxj Ahmeln • Machine safety: active door interlock • Low space requirement, due to compact design • Flexible adaptation to different machines, due to different interfaces • Low investment costs • Complete equipment • Stable design • (solid steel construction, powder coated) • No machine adapters necessary • Supply voltage 400V / 50Hz / 3ph • Compressed air connection min. 6bar • Dimension: 1200 x 600 x 2300mm (LWH)

Condition: excellent (used), Year of construction: 2007, Control system OSP P 200L Swing over bed 530 mm Swing over cross slide 420 mm Max. turning diameter 340 mm Turning length 1000 mm Travel X 260 mm Z 1020 mm C 0.001° Spindle speed (2 ranges) 38 – 3,800 rpm Bljdpfjz Hwmcox Ahmen Spindle power 22/15 kW Spindle bore 80 mm Bar capacity 70 mm Number of tools in turret/driven 12/12 VDI 40 Driven tool speed 4,500 rpm Driven tool power 5.5/3.3 kW Chuck diameter 315 mm Machine dimensions 3310 x 1895 x 1925 mm 6.000kg 3 pcs driven tool holders, 5 pcs fixed tool holders. Chip conveyor, Tailstock with hydraulic locking, Tool measuring equipment,

Condition: good (used), Year of construction: 2002, Control system OSP U 100L, Swing over bed 530 mm, Swing over cross slide 420 mm Max. turning diameter 340 mm Bedpfx Ahez Hwf Ejmeln Turning length 1000 mm Travel X 260 mm Z 1020 mm C 0.001° Spindle speed (2 ranges) 38 – 3,800 rpm Spindle power 22/15 kW Spindle bore 80 mm Bar capacity 70 mm Number of tools in turret/driven 12/12, VDI 40 Driven tool speed 4,500 rpm, 5.5/3.3 kW, Chuck diameter 315 mm Machine dimensions 3310 x 1895 x 1925 mm, 6.000kg 3 pcs driven tool holders, 5 pcs fixed tool holders. Chip conveyor, Tailstock with hydraulic locking, Tool measuring equipment,

Condition: good (used), Year of construction: 2008, Pass threw Hook type shotblasting machine 3000x3500 with motorised hook with crane OMSG Year or production: 2008 Type: Hook type Max. diameter of workpiece: 3000 mm Max. height of workpiece: 3500 mm Max. workpiece weight: 10.000 kg Manual blasting chamber: YES Blow off chamber: YES Machine oppening width: Nr. Of turbines: 16 Turbine type: 350 Turbine wheel diameter: 350 Power of turbine: 16x 11kW Max. turbine flow: Type of transport rail: I Bjdezubb Nopfx Ahmeln Cleaner type: airwash Foundation: YES Housing protection: Mn+ rubber Filter: YES Installed power: 241 kW

Condition: good (used), Year of construction: 1997, functionality: fully functional, Specifications Manufacturer MAZAK Model SQT 30MS Year 1997 Condition Used Bedpfxovk Ewko Ahmeln Description MAZAK SUPER QUICK TURN 30MS CNC SUB SPINDLE, 'C' AXIS, DRIVEN TOOLING LATHE WITH MAZATROL T PLUS CONTROL Kitagawa B-212 3 Jaw Power Chuck. Maximum Swing Ø560mm. Maximum Swing Over Cross Slide Ø500mm. Maximum Turning Ø413mm. Distance Between Spindles 1,035mm. Main Spindle Bore Ø88mm, Sub Ø61mm. Axis Travel 'X'=244mm, 'Z'=1,035mm, 'B'=1,067mm. Maximum Main & Sub Spindle Speeds 3,000rpm. Maximum Milling Spindle Speed 1,500rpm. 12 Station Turret. TOOLINGS INCLUDED WHICH WERE USED IN THE WORKSHOP AND EQUIPMENT FROM PHOTOS WEIGHT 6700 KG DIMENSIONS: LENGHT 4010 mm WIDE 2100 mm HEIGHT 2160 mm

Condition: used, Year of construction: 2005, bore capacity in steel (diameter) 30 mm Bljdpoy N D Iqsfx Ahmon throat 275 mm bore stroke 100 mm taper MK 4 MK table-size 420 x 340 mm feeds nein mm/U turning speeds 80 - 2000 U/min total power requirement 0,9 / 1,45 KW weight of the machine ca. 0,22 t dimensions 0,85 x 0.6 x 1,9 m Pillar drill with: - Variable spindle speed - Digital speed display - Digital depth display - Forward/reverse rotation

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 83,800 h, Equipment: CE marking, LVD STRIPPIT GLOBAL 30 1225 turret press The machine is in very good technical condition and was used by Alsanit. It has been regularly serviced exclusively by the manufacturer's service department. Only new and original spare parts are used during service. The turret press is currently in continuous production use. If you are interested, we encourage you to schedule a visit to confirm the technical condition and technological capabilities of the machine. General data: Location: Alsanit Sp. z o.o., ul. Wieleńska 2, 64-980 Trzcianka, Poland Province: Wielkopolskie Year of manufacture of the turret press: 2006 Date of purchase and installation of the machine: June 2019 Machine operating hours: 83584 cycles Maximum pressing force: 300 kN (30 tons) Maximum sheet thickness: 6.4 mm Turret system type: Thick Turret Control unit: CNC: GE FANUC 180 IP Maximum travel in the X-axis: 2,576 mm Maximum travel in the Y-axis: 1,337 mm Maximum table load (uniform): 145.6 kg Simultaneous speeds: 110 m/min Number of strokes per minute (punch diameter 25 mm): ±2% 400 min-1 Number of strokes per minute (nibbling function - 2 mm): 1000 min-1 Number of strokes per minute (marking/0.5 mm): 1700 min-1 Maximum slide speed in the X-axis: 83 m/min Maximum slide speed in the Y-axis: 73 m/min Number of tool stations in the turret: 30 pcs Station A – max. diameter 12.7 mm: 8 pcs Station B – max. diameter 31.7 mm: 16 pcs Blsdpfx Ahozxzagemjn Station C – max. diameter 50.8 mm: 2 pcs Station D – max. diameter 88.9 mm: 4 pcs Number of indexed (rotary) stations in the turret: 4 pcs (stations D) Note: Each station D can accommodate a multi-tool (1 multi-tool contains 3 to 8 tools), which increases the number of tools from 12 to 32 pcs. Machine height: 2,325 mm Machine length: 5,584 mm Machine width: 5,160 mm Machine weight: 13,750 kg Sheet size: 1250 x 2500 mm Number of sheet clamps (individually programmable): 3 pcs Tilting scrap collector for cut parts: 450 x 500 mm Brush table protecting against scratching the sheets CE certificate Electrical power supply: 380/415 Volt, 35.5 kVA, 63 A, cable cross-section (3+1)x16 mm2 Additional equipment: Scrap conveyor; Brush table MACHINE SPECIFICATION The machine is constructed as a closed bridge frame. The rigid construction ensures stability, reduces noise, vibrations, and oscillations during operation, which in turn has a positive effect on the long service life of both the tools and the machine. The sheet clamps are controlled by a foot switch, and the pin that extends from the table for positioning allows the operator's hands to remain free for proper placement of the sheet on the table. The turret drum of the LVD Strippit Global 30 punch press is made as a cast monoblock, mounted in the machine structure and supported by high-quality and precise bearings. In addition, inside the turret drum, in each tool station, there are hardened and improved sleeves, which can be easily replaced if necessary. The servo drive of the turret ensures precise bidirectional rotation of the turret and the indexing stations (which are locked by a ball head pin after reaching the required angular position, and the accurate linearity and perpendicularity are ensured by tapered, hardened sleeves).

Condition: used, Year of construction: 2025, Mr. Herden will be happy to assist you with any inquiries regarding the wheels (by phone). Blsdpfxjyuafbs Ahmen Forestry wheels / rim / 4 units in stock & immediately available Price for four wheels: €2,490.00 net / €2,963.10 gross Forestry rim 20.00 x 24.5, TUBE EDGE 8/291.3/335, offset ET-55, 21.5 mm / 37 mm ball seat Agricultural rim valve TR 618, Alligator Screw-in water valve, straight, 50 mm long For valve hole Ø 15.7 mm, max. 10.5 bar, V5-01-1 We have many more products in our warehouse that are immediately available! Mr. Herden (phone) will be happy to assist you. Upon request, we will also be pleased to provide you with a financing offer. We are an official sales and service partner for Holp. We are an official sales and service partner for Gierking GMT. We are an official sales and service partner for OilQuick. We are an official sales and service partner for Weber MT. We are an official sales and service partner for Westtech. We are an official sales and service partner for DMS. We are an official sales and service partner for Seppi M. We are an official sales and service partner for Magni telehandlers. We are an official sales and service partner for JCB construction machinery. We are an official sales and service partner for Mercedes-Benz. We are an official sales and service partner for Iveco. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Subject to errors and prior sale! = Further information = Intended use: Construction Please contact Marius Herden for further information.

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 178501, turning length: 1,000 mm, travel distance X-axis: 280 mm, travel distance Z-axis: 700 mm, total height: 2,000 mm, total length: 5,000 mm, total width: 2,200 mm, overall weight: 5,000 kg, controller manufacturer: OKUMA, controller model: OSP-P 300 L, input voltage: 400 V, input frequency: 50 Hz, input current: 154 A, nominal power (apparent): 29 kVA, Equipment: chip conveyor, OKUMA LB 3000 EX 2 - M C 1000 CNC lathe - includes driven tool stations and a C-axis The machine is equipped with a tailstock, a 12-position tool turret, and a three-jaw chuck, diameter: 250 mm, manufacturer KITAGAWA, including a chip conveyor. Bsdpfszxyd Dsx Ahmoln FCA D-63843 Niedernberg