Used Elastomer Test Stand Bia Turnkey Test Syst for sale (20,570)

Condition: used, Elastomer Test Rig BIA Turnkey Test Systems Hexapod Item No.: PT-065 Name: Elastomer Test Rig Manufacturer: BIA Turnkey Test Systems Description: Test rig for determining and analyzing bearing characteristic curves and values at vehicle operating points bearing characteristic curves and values at operating points under specified temperatures bearing behavior under operating load (settlement behavior, characteristic curve changes) functional noise at operating points Rcedpfxjwhdnhs Amgjb on elastomer bearings in the chassis/drive system Test specimens are mounted between an upper fixed platen and a lower mobile platen. The mobile platen is driven by a hydraulic hexapod. The fixed platform is attached to the test structure via a 6-axis force sensor. A linear actuator allows adjustment of the distance between the two plates, to accommodate a wide variety of test specimens and fixtures. Degrees of freedom Amplitude Velocity Frequency Dynamics Xs ±25 mm 1.5 m/s 85 Hz 25 kN Ys ±25 mm 1.3 m/s 85 Hz 25 kN Zs ±25 mm 0.8 m/s 85 Hz 50 kN Mxs ±15° 340° / s 50 Hz 3.75 kNm Mys ±10° 360° / s 50 Hz 3.75 kNm Mzs ±25° 580° / s 50 Hz 3 kNm Hydraulic hexapod: The hydraulic hexapod consists of six hydrostatically mounted hydraulic cylinders. These have a cross-section of 12.53 cm². Each cylinder has two parallel servo valves (38 l/min). The six cylinders drive the mobile plate via six connecting rods. The connecting rods have a hydraulic ball joint at their base. The oil pressure for this hydrostatic bearing comes directly from the cylinder. Linear actuator: The distance between the upper and lower plates can be adjusted using a linear actuator. The actuator consists of an electric motor, a gearbox, and a screw-nut system. The linear actuator is equipped with an absolute encoder. This is attached to the input shaft of the gearbox. Hydraulic actuator: The hydraulic cylinders are equipped with magnetostrictive position sensors. Resolution: 0.0015% Linearity:

Year of construction: 2022, condition: good (used), Test stand for filter testing, filter testing, filter test system, filter measurement system, filter test system -Manufacturer: Lorenz, Filter Test System Type FMP 03 with accessories -Filter holder: Type FH 143/149 -Accessory case: with extensive contents -Individual components/accessories: see photos -Dimensions: 600/560/H975 mm / 640/460/H1130 mm / 430/340/H125 -Weight: 146.3 kg Rjdpjyk Ahwefx Amgocb

Year of construction: 2006, condition: ready for operation (used), Delivery head: 0-9.5m, pump speed: 6000/min, water temperature: 10-50°C, tank volume: 8m³, max. delivery pressure: 25bar, with documentation, on-site inspection is possible. Rcsdpfxsrn Ta Re Amgob

Condition: used, machine/vehicle number: 18331, test stand for performance up to 2.2 KW speed control speed change hand remote control with cable for switch of speed and rotational direction Rsdpfx Asghwwxjmgjcb data concerning converter please refer to type plate connection cable CEE 32A output CEE 16A space requirements width - 600 x depth - 650 x height - 1,750 mm rollable weight approx. 85 kg  

Condition: excellent (used), ESPEC ARS-0680-AE Environmental Test System Type: ARS-0680-AE Manufacturer: ESPEC Design: Environmental Test System with external stainless steel test chamber For sale is a complete ESPEC Environmental Test System for temperature, climate, and automotive testing applications. The system consists of two ESPEC climate test chambers type ARS-0680-AE and an external stainless steel test cell mounted on a mobile frame. The external stainless steel chamber serves as the primary test space for larger samples such as vehicle headlights, lighting modules, electronic components, or automotive assemblies. The two ESPEC climate test chambers generate the required temperature and climate conditions for the external test cell. Condition / Display: Used system, optical condition as shown in the pictures. Both units display STOP / ready for operation. Operating hours according to displays: Approx. 5,887 h Approx. 6,950 h Special feature: Complete environmental test system with external stainless steel test cell. Especially suitable for complex testing applications with larger or externally connected test pieces. Technical Data of Climate Test Chambers: 2x ESPEC ARS-0680-AE Rcsdpey H H Uhofx Amgsb Year of manufacture: 2017 / 2018 Test chamber volume: approx. 680 liters each Temperature range: approx. -70 °C to +180 °C Humidity range: approx. 10 % to 98 % r.h. Temperature change rate: up to approx. 4–6 K/min Internal dimensions (W x H x D): approx. 850 x 1000 x 800 mm External dimensions (W x H x D): approx. 1050 x 1955 x 1805 mm Electrical Data: Connection: AC 400 V / 3~ / 50 Hz Max. current consumption: approx. 22–27 A Weight: approx. 505–615 kg per unit Cooling System: Air-cooled cascade refrigeration system No external water connection required Refrigerants according to type plates: R23 – 0.65 kg R452A – approx. 2.1–2.3 kg External Stainless Steel Test Cell: External remote test chamber on a mobile steel frame Large test space for bulky specimens Interior made of stainless steel Front opening with all-around seal Several toggle latches Side feedthroughs / connection ports Shelf / test tray provided Heavy-duty casters Equipment: 2x ESPEC climate test chamber ARS-0680-AE External stainless steel test cell Touchscreen control panel Program and constant operation Temperature and humidity operation Observation window Stainless steel test chambers Interior lighting / chamber lamp Side tube and cable feedthroughs Ethernet interface Specimen temperature input Power supply control for specimen Time signal outputs Water tank system for humidity operation Mobile design Scope of Delivery: 2x ESPEC climate test chamber ARS-0680-AE 1x external stainless steel test cell on mobile frame Available connection cables / accessories as present Available documentation as present Scope of delivery as shown Note: This is a customer-specific special test system. The two ESPEC climate test chambers and the external stainless steel test cell belong together and are offered exclusively as a complete system. Service / Preparation: Functional check and replacement of necessary components Refilling with legally compliant refrigerant (if required) Leak test with certificate Documented test run Miscellaneous: Inspection possible by appointment Loading can be arranged Commercial sale – Sold without warranty. (Subject to changes and errors)

Condition: good (used), In this offer you buy a used cutting plotter "Mimaki CJV150-75" Rcedpfx Amshg Amaegjb Item for sale: 1 x Mimaki CJV150-75 with the following equipment: incl. 8 ink colour printing system incl. special colours: orange, white and light black - Print head must be replaced Condition: This is a used machine and may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The unit has been tested for function A test printout can be seen in the photo. For more information you can of course contact us personally. Shipping is possible on request!

Condition: used, functionality: fully functional, The 16-channel FT2M control system from MTS was in use until recently and is now for sale. All 16 system cables for 16 control channels—force, displacement, and servo valve—are included. PC and system software are included. Equipment: 16 pcs: Dual Valve Driver Board 497.26 16 pcs: AC Amplifier Board AC Cond 497.13B 16 pcs: Dual DC Amplifier Board 497.22C 4 pcs: 497.01 Analog Chassis (19" rack) 4 pcs: Power supply +-15V/+5V Rcsdpswv Uqiefx Amgob 4 pcs: Station Control Card 497.34 4 pcs: RS232 Communication Card 497.36 1 pc: Hydraulic Control Panel 497.05 for 4 stations 1 pc: Global Resources III Card 498.71B 4 pcs: ADDA Card 498.65 2 pcs: PROC CPU 498.96-3

Condition: ready for operation (used), Siemens 6EV3054-0DC built-in power supply E Stand E , serial no. according to photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos Redpfx Amsi Edvwegscb

Condition: as good as new (ex-display), functionality: fully functional, overall weight: 700 kg, total length: 900 mm, total width: 2,100 mm, total height: 2,200 mm, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 5 bar, electrical fuse: 20 A, The Ring Tester is engineered for automated crack detection on ring-shaped components, such as bearing races and gears, utilizing the eddyvisor C. In addition to crack testing, customers can inspect for grinding burn on the inner and outer rings of roller bearings. For this purpose, a robot manipulates and guides the sensor precisely along the contours of the test part. Testing is conducted using up to two probes. All relevant scanning parameters and communication protocols for controlling the eddyvisor C are integrated into the robot scanning program. Rcedpfeyx E D Esx Amgsb At the heart of the system is the eddyvisor C, a two-channel eddy current instrument, ensuring highly reliable detection of cracks and grinding burns. Process automation is achieved by an integrated Stäubli TX2-60 robot. The entire system is managed and operated via a control cabinet equipped with an integrated control and operating panel. A vertical spindle with chuck reliably clamps each test component during the inspection process. Non-conforming (NOK) parts identified during testing are automatically discharged to one of two designated NOK storage conveyors. Separate storage locations for reference and master parts facilitate calibration and ongoing quality assurance during operation. The system also incorporates the ibg Optical Reflection Sensor (iORS), enabling precise, non-contact inspection of rings.

Condition: as good as new (ex-display), functionality: fully functional, overall weight: 240 kg, total length: 1,213 mm, total width: 804 mm, total height: 1,856 mm, The ibg eddyrobot is a modular, semi-automatic system for eddy current crack and grinder burn detection. Equipped with the eddyvisor C and supporting up to four interchangeable ET probes, it delivers industrial-grade accuracy and flexibility. Its compact and mobile design makes it ideal for use on production floors, in laboratories, or for standalone inspection tasks. Key safety features include an electromechanical lock and emergency stop to ensure operator protection. The user-friendly interface enables straightforward operation, while the integrated ibg eddyvisor C with differential crack test probe provides precise and reliable inspection results. The system also features a flexible probe station that stores up to four ET probes, allowing for automatic probe changes via the robotic arm. At the core of the system is a Mecademic Meca 500 six-axis industrial robot featuring ±5 µm repeatability, ensuring consistent and repeatable test procedures. The entire unit is managed by a Beckhoff PLC. For mobility, the eddyrobot is mounted on 100 mm rubber wheels (two of which are lockable), and includes a handle and corner protection. Its compact footprint allows easy passage through standard doorways. For more information, please visit our website. Rjdpfjy H Dfdjx Amgecb

Condition: new, Siemens Simovert 6SE7016-4FS87-2DA0 Brake Unit E Version C > unused < in opened original packaging, 100% functional Rcsdpexahtcofx Amgjb

Condition: new, Siemens 6ES5101-8UC21 Simatic expansion unit E Stand 1 , unused in opened original box, 100% functional Rcsdpsi Edntofx Amgob

Condition: ready for operation (used), Siemens 6FX1124-0BA02 Dualport module E-version: D SN:333, used, normal signs of use, 100% functional, delivery as per photos. Rjdpfoxagn Sex Amgscb

Condition: new, Siemens Simovert 6SE7022-5FA87-2DA0 braking unit E version C > unused < in opened original packaging, 100% functional Rcodpfexahtiex Amgsb

Condition: ready for operation (used), Siemens 6FX1136-8BB00 880 BGR Multiport E-Stand: D SN: 13, used, good condition, 100% functional, delivery as shown in the photos. Rjdpfsx Dxc Nsx Amgocb

Year of construction: 2021, condition: used, Serial no. P61483, PC control, manufacturer Innomatec, touch display, process chamber, compressor station, peripheral units, roller trolley for crate provisioning. Subject to prior sale. Rcsdpoy A Ir Hjfx Amgsb

Condition: like new (used), operating hours: 250 h, SHI Machines Type: BlueBox Virtually unused with only 250 operating hours! Technical specifications: Power: 120 kW Torque: up to 470 Nm Rodpfoy Tg R Nsx Amgscb Speed: up to 6,000 rpm Operation: Four-quadrant operation Safety package: Bulletproof cover & data filter for "Go" signal line Dimensions: approx. 2800 × 1600 × 1300 mm Accessories, etc.: 1 clutch 120 - steel, incl. adapter Clutch size: 100 Max. speed: 7,300 RPM Max. torque: 1,000 Nm 1x adapter 1x clutch steel size 100 1x adapter 2 ø40 1x adapter 2 ø50 1x adapter 2 ø60 1x clamping device ø40 1x clamping device ø50 1x clamping device ø60 Adapter mounting tool Clutch 120 - CFRP, incl. adapter Max. speed: 8,500 RPM Max. torque: 720 Nm Adapter mounting tool CISPR 25 test bench made of wood on wheels for EMC BlueBox 120, size 2500 x 1000 x 900 mm Load capacity up to max. 500 kg, incl. 2 mm hot-dip galvanized ground plane Payload: up to 1,400 kg Weight: approx. 2,500 kg Operating voltage 400 V, 250 A Control voltage 24 V Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information provided are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. The device is used for, among others: • Quality control (QC) • End-of-line production testing • OEM laboratories and testing stations ⸻ Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last factory calibration by ETL: 05/2023 • Weight: 38 kg ⸻ Rcjdpfx Amjyc H N Njgsb Equipment / Included in delivery • Main ATS 400 X8 unit with integrated touchscreen display • Windows 10 Pro operating system (OEM) • Complete set of test leads and accessories (as shown in the photos) • Manufacturer’s documentation • Original markings, nameplates, CE certification ⸻ Technical notes • This is a professional test and measurement instrument, not consumer electronics • The equipment is ready for use in a production environment • No signs of tampering; all connectors and interfaces are complete

Year of construction: 2019, condition: ready for operation (used), A Flying Probe Tester Seica Pilot V8 Next Series with inline handling module on the left for vertical tilting of the PCB and inline handling module on the right for horizontal tilting and rotating of the PCB is available. Flying Probe Test System Seica Pilot V8 Next Series: PCB clamping system: manual, double-acting, manual active test area: 538x610mm, active test area: 518x610mm, PCB dimensions: 540x610mm, min. PCB size: 20x20mm, PCB thickness: 0.3 to 5mm, max. component height: 37mm, PCB loading: vertical, UUT edge clearance manual/automatic: 2/6mm, length: 1750mm, width: 1030mm, height: 1995mm, weight: 1.4t. Test tools/techniques: FNODE signature analysis on the nets of the unit under test, standard analog and digital in-circuit test, vectorless tests, JSCAN and OPENFIX to test ICs for opens and shorts, PWMON net analysis with power-on of the assembly, continuity tests to detect open connections on the assembly, visual tests for detecting component presence, component absence and rotation, high-resolution color camera, optional functional tests and boundary scan test capabilities, optional on-board programming tools for digital components, with complete documentation. An inspection on site is possible. Rjdpfx Amey Sv S Hogecb

Condition: excellent (used), emtest / AMETEK Automotive EMC Test System incl. Laptop & Software Manufacturer: emtest / AMETEK Design: Automotive EMC / on-board network testing system Format: Mobile 19" industrial cabinet For sale is a professional test and simulation system from emtest / AMETEK, designed for industrial applications in the fields of automotive, electronics testing, on-board network simulation, and EMC/EMI test technology. The system is supplied with a laptop featuring pre-installed control and test software, making it ideal for professional laboratory, development, and test bench use. The system comprises several integrated test modules, cooling fan units, as well as various power, control, and interface components. Visibly identifiable components: Module 1: emtest AutoWave Module 2: emtest VDS 200Q Display designation: VDS 200Q100.2 Function according to display: Voltage Drop Simulator Serial number on display: SWN 001638 AutoWave display: Version 8.03.05 Out: 2 / In: 0 VDS 200Q display: DC Supply Waveforms Firmware: V2.02.00 Generator: V2.01.01 Additional model designation (from documentation): VDS 200Q100.2-208 Connections / Interfaces: - Ethernet - IEEE 488 - USB VDS - Frame Bus In / Frame Bus Out - Analog In - AutoWave CH1 / CH2 / CH4 - 0–10 V connection - DC output / output connectors - CEE power plug - Emergency stop switch Features: - Mobile industrial/19" cabinet - Multiple integrated cooling fans - Front control and terminal panels - Rear power and interface connections - Side-mounted emergency stop switch - Industrial-grade build for laboratory, development, and test bench applications Potential application areas: - Automotive test engineering - On-board network simulation - Voltage drop simulation - Electronics and component testing - EMC/EMI laboratory - Research and development - Quality assurance - Test bench and measurement applications Technical notes: - Four-quadrant voltage drop simulator - Suitable for automotive voltage profile testing - Supports various automotive test standards, such as LV 124, LV 148, ISO 7637-2, ISO 16750, and similar standards - Output range per documentation: -20 V to +80 V - Bandwidth up to 250 kHz Condition: Rsdpfxsy Rlbhs Amgjcb Used device with age- and use-related signs of wear. See pictures for cosmetic condition. Unit powers on; displays are active. A full technical function test under load has not been performed. Dimensions & weight: Exact dimensions and weight have not been established. Due to its design as a mobile industrial cabinet, assume corresponding industrial-grade weight. Exact measurements and weights can be provided upon request. Scope of delivery: - emtest / AMETEK test system in a mobile industrial cabinet - Laptop with installed control and test software - AutoWave module - VDS 200Q / VDS 200Q100.2 module - Built-in fan and connection units - Scope of delivery as shown in images Notes: - Inspection possible by prior appointment. - Loading can be arranged. Commercial sale – sold without warranty. Subject to changes and errors.

Condition: used, ETS MPA102/L620M Shaker Vibration Testing & Horstmann HS 220 Climate Test Chamber System Vibration Testing System: ETS MPA102/L620M Sine Force: 600 kgf Random Force: 600 kgf Shock Force (6 ms, half sine): 1,200 kgf Max. Sine Velocity: 2 m/s Max. Sine Acceleration: 981 m/s² Armature Diameter: 200 mm First Resonance Frequency: 3,300 Hz Dimensions: 943 x 633 x 770 mm Shaker Weight: 730 kg Amplifier Unit: 6 kVA Blower Unit: HP-2 / 4 kW Climate Chamber: Horstmann HS220 Test Chamber Volume: 220 liters Test Chamber Dimensions: 600 x 600 x 600 mm (H x W x D) Temperature Range: -40 to +180 °C Cooling Rate: 2 K/min 3 K/min Heating Rate: 3 K/min 3 K/min Electrical Connection: 400V, 3/N, 50 Hz / 5 kW External Dimensions: 1,630 x 1,700 x 1,200 mm (H x W x D) Used item as shown in the pictures. Rcodpoy Sl Uqsfx Amgsb Shipping: The specified shipping costs apply to deliveries within Germany. Worldwide shipping available (please inquire for shipping costs outside Germany). The given shipping costs apply to shipping within Germany. Sale only to commercial customers. No warranty or guarantee. Deviations from the technical data as well as errors in the article description are possible and subject to change.

Condition: used, Designation: Vibration Test System Manufacturer: Data Physics Model: LE-1216-3VH Force Rating: Sine (5 - 2000 Hz) Random (20 - 2000 Hz) 12000 lbf (53.4 kN) vector 12000 lbf (53.4 kN) rms Frequency Range Full Force Reduced Force Level 5 to 3000 Hz 2500 to 3000 Hz Maximum Displacement (Peak-Peak): Rated Stroke Limit Shock/Bump Continuous or Random Electrical Overtravel Limit Between Mechanical Stops 3.0 in (76 mm) 2.5 in (63.5 mm) 3.1 in (79 mm) 3.2 in (81 mm) Rcsdoy Rqiwspfx Amgeb Maximum Velocity 71 in/s (1.8 m/s) Maximum Acceleration Sine 100 g vector, 5 to 2500 Hz Random 50 g rms, 20 to 2000 Hz Fundamental Resonance Frequency (Bare Table) 2050 Hz (nom.) Body Suspension Natural Frequency — Thrust Axis: - Vertical: 2 Hz - Horizontal: Below 2 Hz Blower Power (Full Load): 20 Hp, 20 kW; 230/460 V, 3-phase, 60 Hz Alternate Power: 20 Hp, 20 kW; 208/400 V, 3-phase, 50 Hz Air Pressure: Air Spring: - Vertical: 90-100 psig (621-690 kPa) - Horizontal: 2-5 psig (14-34 kPa) Field Specifications: - Rated Current (dc): 64 A - Maximum Voltage (dc): 240 V - Field Resistance at 20°C: 3.2 ohm Stray Flux Density with degauss coil: < 14 gauss at 12 in (304 mm) above table Field Protection: - Rated degauss coil current: 2.6 A (Nominal) - Maximum degauss coil voltage: 120 V Weight: 1216-3VH: 8000 lbs (3636 kg) Power Amplifier Model: DSA10-80 Item condition: Used item as shown in pictures Armature newly rewound Slip table / 40 mm grid M8 760 x 760 Armature bolt circles 8" / 16" M10 Please contact us if you have any questions. Shipping: The quoted shipping costs apply to deliveries within Germany. Worldwide shipping (please inquire for shipping costs outside of Germany). Sale only to commercial customers, without warranty or guarantee. Deviations from technical data and errors in the description of the items may occur and are subject to change.

Condition: excellent (used), LDS / CTS Vibration Test System Model: V895-440 HBT SP + CTS CV-70/1700-10 Manufacturer: Ling Dynamic Systems (LDS) / CTS For sale is a complete electrodynamic vibration test system consisting of an LDS shaker, SPA56K power amplifier, K2+ control system, and CTS climate chamber. Ideal for combined vibration and environmental testing in industrial, automotive, aerospace, as well as research and development applications. Shaker / Vibrator Manufacturer: Ling Dynamic Systems Ltd. (UK) Model: V895-440 HBT SP Air-cooled vibrator Armature diameter: 440 mm Frequency range: DC – 2100 Hz Sine force: 55.6 kN Shock force: 166.8 kN Max. acceleration: 981 m/s² Max. velocity: 1.6 m/s Displacement: 63.5 mm pk-pk Payload: approx. 700 kg Air-bearing and vibration-isolated system. Compressed air supply required. Power Amplifier Manufacturer: LDS Model: SPA56K v3 V890/5 Class-D high-performance switching amplifier Air-cooled industrial version Mains voltage: 415 V Max. power consumption: 86.9 kVA Efficiency: > 90 % Controller display: Amplifier: SPA8/16K_v3 Vibrator: V830_185 Control System IMV K2+ vibration control system Multi-channel control system Including Dell Precision PC system, monitor, keyboard, and mouse CTS Climate Chamber Manufacturer: CTS Clima Temperatur Systeme Model: CV-70/1700-10 Year of manufacture: 03/2020 Temperature range: -70 °C to +180 °C Humidity range: 10% to 95% r.h. Volume: approx. 1700 liters Rated voltage: 400 V / 3/N / 50 Hz Power: 21.9 kW Rated current: 37.1 A Refrigerant: R452A: 9.5 kg Rjdpfxjy Iwp Sj Amgjcb R23: 3.7 kg Equipment Combined climate and vibration testing Slip table / mounting table included Vibration-isolated installation Programmable operation possible Slip Table 760 mm x 850 mm Threaded insert spacing: 100 mm Activated Licenses: Excitation modes Sine, resonance dwell, limit control, amplitude dwell Multi sweep sine, noise soft-clipping, sine-on-random PSD limit control, shock Extensions Scheduler, multi-language, launcher, system monitor Weight Shaker: approx. 3.0 – 3.2 t Total weight: approx. 6,000 – 7,000 kg Condition Used system System was last in operation System starts / control active Inspection under power possible Scope of delivery LDS V895-440 HBT SP shaker LDS SPA56K amplifier IMV K2+ system Complete PC system CTS climate chamber Accessories per photos Loading possible. Sale without warranty. Subject to prior sale and changes.

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the upgraded safety and performance test package “P Plus.” This is not a standard laboratory incubator, but rather a high-end safety test chamber specifically designed for aging, performance, and safety testing of lithium-ion energy storage systems. The device is fully functional and has been tested. It originally sustained a transport-related housing damage, which has been professionally repaired and repainted. Technically flawless – visually in very good condition 100% operational – no limitations Price advantage: €1,000 cheaper than comparable units Special Value Added: The unit is designed to reliably detect, monitor, and safely contain critical battery events – up to EUCAR hazard level 5 (fire/flames, no explosion). What exactly can the device do? (Item 2 – Performance & Application) - Aging tests on lithium-ion cells - Performance tests (charge/discharge cycles at temperature) - Long-term temperature runs and thermal cycling tests - Testing of unpowered and cyclical powered cells - Reproducible, precise temperature control throughout the entire chamber - Safe testing under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: - Battery & cell manufacturers - Research and development laboratories - Test labs & safety testing - Automotive / E-mobility / Energy storage sectors The P Plus package turns the KB 720 into a genuine battery safety test cabinet: Integrated Safety Features: - Automatic & manual CO₂ fire suppression system - Smoke detector with optical and acoustic alarm - Mechanical double-door locking (secure containment) - Spark protection inside chamber - Exhaust port with reversible overpressure valve - Connections for external inertization (e.g., nitrogen) - Emergency stop / manual trigger of suppression system - Cable feedthroughs for charging and measurement cables Result: The device is designed for testing lithium-ion cells up to EUCAR hazard level 5, where fire or flames may occur, but without explosion or uncontrolled propagation. This is not an abuse or destruction testing device, but a compliant, safe test chamber for real-world operational and fault scenarios. Technical Key Data: Temperature range: –10 °C to +100 °C Internal volume: approx. 698 liters Shelves: 4 × stainless steel Max. load per shelf: 45 kg Max. overall load: 100 kg Electrical Data: Power supply: 200–240 V AC Frequency: 50 / 60 Hz Phase: single-phase Power consumption: approx. 2.1 kW Fusing: 16 A Refrigerant: R134a Protection class: IP 20 Dimensions & Weight: External (W × H × D): approx. 1250 × 1950 × 900 mm Internal (W × H × D): approx. 970 × 1250 × 576 mm In summary – why this device is special: - Genuine battery safety test cabinet - EUCAR hazard level 5 capable - Integrated CO₂ extinguishing system - Large chamber (≈700 l) - High market and resale value Rcsdpoyyw E Rjfx Amgeb Weight: approx. 285–300 kg Documents & Downloads Condition: used Scope of delivery: (see photo) (Specifications subject to change and errors reserved!) Further questions? Please feel free to contact us by phone.

Condition: good (used), Year of construction: 2013, Helium leak detector Rcedpot Uru Tsfx Amgeb Manufacturer: Leybold Type: Phoenix L300i Condition: very good! Connection: 230V Delivery time: ex stock (u.ü.V.)