Used Elock2 Stopengo, Automatic Access Control - 1 Unit for sale (120,413)

Condition: new, Access control system with traffic lights to limit the number of people. Detection is reliably performed via sensors. The following detection options are available: entry and exit, or only entry. Detection occurs at a 90° angle to the traffic light pole on the left. Ljdpfx Ale Adkc Ee Toru

Condition: new, Access control system with traffic lights to limit the number of people. Detection is reliably performed via sensors. The following detection options are available: entry and exit, or only entry. Detection occurs at a 90° angle to the traffic light pole on the left. Lrodps Adkc Sefx Al Teu

Condition: new, Access control system with traffic lights to limit the number of people. Detection is reliably performed via sensors. Lrodpo Adkdcsfx Al Tju The following detection options are available: entry and exit, or only entry. Detection occurs at a 90° angle to the traffic light pole on the left.

Condition: used, DÜRR Type: DÜRR 1K adhesive application system Dürr 1K adhesive application system with drum pump, dispenser, and heated hose (approx. 5m). Technical machine description: Condition of the system: The drum pump, feed hoses, dispensing unit, etc., are contaminated with old adhesive and must be cleaned or replaced. The system has approximately 20 operating hours. The machine was used in a research facility. Year of manufacture: 2017 Air inlet pressure: Max. 6 bar Dimensions: Approx. 1.5 x 1 x 1.5 meters 1 adhesive control unit DÜRR (110017040) 1 single drum pump (110014004) Weight: approx. 300 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) Ljdpfx Aszgckcsl Teru We will gladly answer any further questions you may have by telephone.

Condition: used, IPG Ytterbium Type: YLP-C-1-100-20-20 IPG Ytterbium fiber laser with controller Lodpszdyyvefx Al Toru IPG Ytterbium fiber laser Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: new, Work platform, 3 steps, one-sided access, with handrail, H 600 mm, R13 slip-resistant surface, Günzburg model Lods Ac T Uuepfx Al Toru * Stable, welded tubular steel construction * Steps made of aluminum * Safety steps with certified slip resistance R13 * With a 600 mm high, one-sided handrail for increased safety Design: one-sided access with handrail Working height up to approx.: 2600 mm Base area depth: 880 mm Number of steps incl. platform: 3 Platform depth: 300 mm Platform width: 550 mm Base area width: 750 mm Features: R13 slip-resistant surface Max. total load: 150 kg Weight: 10.5 kg Platform height: 600 mm

Condition: used, Spare parts donor We are dismantling the CNC turning machine GILDEMEISTER, type GDM 42/2A CNC control system Eltropilot EPL 2 Machine no. 4.5733, year of manufacture 1989 Machine not operational - electrical problems Turning diameter, normal: 185 mm Swinging diameter, max.: 400 mm Cross slide travel = planar travel: 190 mm Longitudinal slide travel = longitudinal travel: 450 mm Spindle bore in the turning spindle: 52.7 mm Spindle passage in the draw tube: Ø 42 mm Feed rate X and Z, max.: 3000 mm/min Spindle speed: 40-6300 rpm, continuously variable Motor power, spindle drive: 22 kW Mains connection: 400 volts, 50 Hz, 45 kVA - Hydraulic 3-jaw chuck FORKARDT, Ø 200 mm - Tool turret, 12-station, VDI 40, every second station powered - Powered tool station in 6 stations - Electrical cabinet located beside the machine Footprint of the complete machine, L x W x H: 5000 x 2500 x 2100 mm Weight of the complete system: approx. 5.7 tons good condition Transport dimensions: Footprint of the base machine, L x W x H: 3000 x 2300 x 1900 mm Weight of the base machine: approx. 4.8 tons Footprint of the machine's electrical cabinet, L x W x H: 2500 x 550 x 2000 mm Weight of the machine's electrical cabinet: approx. 450 kg Lrjdpfx Asdzqm Rol Tou without chip conveyor Main motor missing Individual parts available upon request In the electrical cabinet: Siemens Siemens 6SC6101-3A-Z + the circuit boards

Condition: new, Work platform, 3 steps, one-sided access, H 600 mm, R13 anti-slip surface, Günzburger · Sturdy, welded tubular steel construction, steps made of aluminum, safety steps with certified R13 anti-slip surface, end caps with non-slip plastic shoes, max. total load Max. total load: 150 kg Base area depth: 880 mm Platform depth: 300 mm Features: R13 anti-slip surface Platform height: 600 mm Design: one-sided access Base area width: 750 mm Lrjdpe Ac T Ubefx Al Tou Weight: 9 kg Platform width: 550 mm Number of steps incl. platform: 3 Working height up to approx.: 2600 mm

Condition: used, SINGLE Industrial Temperature Controller / Water Temperature Controller / Temperature Control System SINGLE STW 150/1-6-B25T/40-K7/KS7 Water/Glycol Temperature Controller Year of manufacture 2016 – mobile industrial version For sale is a used industrial temperature controller from the manufacturer SINGLE Temperiertechnik GmbH, model STW 150/1-6-B25T/40-K7/KS7. The temperature controller is suitable for temperature control of tools, machines, and industrial process circuits. According to the nameplate, the heat transfer medium is water/glycol. Technical data: Manufacturer: SINGLE Temperiertechnik GmbH Model: STW 150/1-6-B25T/40-K7/KS7 Device type: Industrial temperature controller Year of manufacture: 2016 Country of manufacture: Germany Heat transfer medium: Water / Glycol Electrical data: Operating voltage: 400 V Current type: 3~ / PE Frequency: 50 Hz Rated current: 14.8 A Apparent power: 10.2 kVA Temperature control system: STW 150 series for industrial temperature control applications Ledpfxe Aa Ngzs Al Tjru Water/glycol circuit Hydraulic connections for heat transfer medium Pressure gauge Piping and connection fittings Rear connection assembly Equipment: Industrial temperature controller Water/glycol temperature control Electrical main switch Pressure gauge Shut-off valve Hydraulic connections Connecting lines Ventilation openings in the housing Closed industrial housing Transport handle Castors Equipment as shown in the pictures Application areas: Tool temperature control Injection molding machines Plastics processing Mechanical engineering Production plants Process and circuit temperature control Industrial temperature control applications Mold and tool making Dimensions / Transport: Dimensions (L x W x H): not yet determined Unladen weight according to the nameplate: 131 kg Condition: Used Year of manufacture 2016 Optical condition as shown in the pictures Signs of wear and tear due to use are present. Some deposits and signs of wear are visible on the rear connections and fittings. Scope of delivery: 1 × SINGLE STW 150/1-6-B25T/40-K7/KS7 temperature controller Connection assembly and fittings as shown in the pictures Otherwise, the scope of delivery is as shown in the pictures. Shipping or freight shipping possible by arrangement. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, SINGLE Industrial Temperature Controller / Water Temperature Controller / Temperature Control System SINGLE STW 150/1-6-B25T/40-K7/KS7 Water/Glycol Temperature Controller Year of manufacture 2016 – mobile industrial version For sale is a used industrial temperature controller from the manufacturer SINGLE Temperiertechnik GmbH, model STW 150/1-6-B25T/40-K7/KS7. The temperature controller is suitable for temperature control of tools, machines, and industrial process circuits. According to the nameplate, the heat transfer medium is water/glycol. Technical data: Manufacturer: SINGLE Temperiertechnik GmbH Model: STW 150/1-6-B25T/40-K7/KS7 Device type: Industrial temperature controller Year of manufacture: 2016 Country of manufacture: Germany Heat transfer medium: Water / Glycol Electrical data: Operating voltage: 400 V Current type: 3~ / PE Frequency: 50 Hz Rated current: 14.8 A Apparent power: 10.2 kVA Temperature control system: STW 150 series for industrial temperature control applications Water/glycol circuit Hydraulic connections for heat transfer medium Pressure gauge Piping and connection fittings Rear connection assembly Equipment: Industrial temperature controller Water/glycol temperature control Electrical main switch Pressure gauge Shut-off valve Hydraulic connections Connecting lines Ventilation openings in the housing Closed industrial housing Transport handle Castors Equipment as shown in the pictures Application areas: Lrjdpfx Ao Aa Ng Ijl Tsu Tool temperature control Injection molding machines Plastics processing Mechanical engineering Production plants Process and circuit temperature control Industrial temperature control applications Mold and tool making Dimensions / Transport: Dimensions (L x W x H): not yet determined Unladen weight according to the nameplate: 131 kg Condition: Used Year of manufacture 2016 Optical condition as shown in the pictures Signs of wear and tear due to use are present. Some deposits and signs of wear are visible on the rear connections and fittings. Scope of delivery: 1 × SINGLE STW 150/1-6-B25T/40-K7/KS7 temperature controller Connection assembly and fittings as shown in the pictures Otherwise, the scope of delivery is as shown in the pictures. Shipping or freight shipping possible by arrangement. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, SINGLE Industrial Temperature Controller / Water Temperature Controller / Temperature Control System SINGLE STW 150/1-6-B25T/40-K7/KS7 Water/Glycol Temperature Controller Year of manufacture 2016 – mobile industrial version For sale is a used industrial temperature controller from the manufacturer SINGLE Temperiertechnik GmbH, model STW 150/1-6-B25T/40-K7/KS7. The temperature controller is suitable for temperature control of tools, machines, and industrial process circuits. According to the nameplate, the heat transfer medium is water/glycol. Technical data: Manufacturer: SINGLE Temperiertechnik GmbH Model: STW 150/1-6-B25T/40-K7/KS7 Device type: Industrial temperature controller Year of manufacture: 2016 Country of manufacture: Germany Lrsdpfs Aa Nf Rex Al Teu Heat transfer medium: Water / Glycol Electrical data: Operating voltage: 400 V Current type: 3~ / PE Frequency: 50 Hz Rated current: 14.8 A Apparent power: 10.2 kVA Temperature control system: STW 150 series for industrial temperature control applications Water/glycol circuit Hydraulic connections for heat transfer medium Pressure gauge Piping and connection fittings Rear connection assembly Equipment: Industrial temperature controller Water/glycol temperature control Electrical main switch Pressure gauge Shut-off valve Hydraulic connections Connecting lines Ventilation openings in the housing Closed industrial housing Transport handle Castors Equipment as shown in the pictures Application areas: Tool temperature control Injection molding machines Plastics processing Mechanical engineering Production plants Process and circuit temperature control Industrial temperature control applications Mold and tool making Dimensions / Transport: Dimensions (L x W x H): not yet determined Unladen weight according to the nameplate: 131 kg Condition: Used Year of manufacture 2016 Optical condition as shown in the pictures Signs of wear and tear due to use are present. Some deposits and signs of wear are visible on the rear connections and fittings. Scope of delivery: 1 × SINGLE STW 150/1-6-B25T/40-K7/KS7 temperature controller Connection assembly and fittings as shown in the pictures Otherwise, the scope of delivery is as shown in the pictures. Shipping or freight shipping possible by arrangement. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: new, Working platform, 5 steps, one-sided access, H 1000 mm, R13 surface, Günzburger · Sturdy, welded tubular steel construction, steps made of aluminum, safety steps with certified slip resistance R13, end pieces of the supports with non-slip plastic shoes, max. total load Platform height: 1000 mm Lodpfxe Ac T Uno Al Toru Design: one-sided access Base width: 830 mm Platform depth: 300 mm Max. total load: 150 kg Weight: 15 kg Features: R13 surface Working height up to approx.: 3000 mm Steps including platform: 5 Base depth: 1340 mm Platform width: 550 mm

Condition: new, Work platform, 4 steps, one-sided access with handrail, H 800 mm, R13 non-slip surface, Günzburger * Stable, welded tubular steel construction * Steps made of aluminum * Safety steps with certified slip resistance R13 * With 600 mm high, one-sided handrail for increased safety Weight: 13.5 kg Platform width: 550 mm Platform depth: 300 mm Number of steps including platform: 4 Max. total load: 150 kg Design: one-sided access with handrail Platform height: 800 mm Base area depth: 1140 mm Working height up to approx.: 2800 mm Lrodpfxs Ac T Uze Al Tsu Features: R13 non-slip surface Base area width: 790 mm

Condition: new, Work platform, 2 steps, one-sided access, H. 400 mm, R13 slip-resistant surface, Günzburger · Sturdy, welded tubular steel construction, steps made of aluminum, safety steps with certified R13 slip resistance, end caps with non-slip plastic shoes, max. total load Ljdpfe Ac T T Rsx Al Toru Steps including platform: 2 Base width: 700 mm Design: one-sided access Features: R13 slip-resistant surface Weight: 6 kg Max. total load: 150 kg Platform width: 550 mm Platform height: 400 mm Base depth: 650 mm Platform depth: 300 mm Working height up to approx.: 2400 mm

Condition: new, Work platform, 4 steps, one-sided access, H 800 mm, R13 non-slip surface, Günzburger * Sturdy, welded tubular steel construction, steps made of aluminum, safety steps with certified R13 slip resistance, end caps with non-slip plastic shoes, max. total load Features: R13 non-slip surface Lrsdpfo Ac T Uhsx Al Tju Platform height: 800 mm Platform depth: 300 mm Design: one-sided access Weight: 12 kg Working height up to approx.: 2800 mm Base width: 790 mm Max. total load: 150 kg Base depth: 1140 mm Platform width: 550 mm Steps incl. platform: 4

Condition: new, - 20 m cable; Ø 6 mm - Cable speed approx. 0 - 0.5 m/sec - Pulling force up to 500 kg - Transmitter: with 3 AAA batteries; 1.5 Volt; 4 buttons (On / Off / Retract / Extend); 64 different frequencies; weight 120 g - Receiver: 12 Volt DC from the tractor; incl. cable and connector - In case of a power failure, the valve can also be operated manually - Incl. mounting bracket for mounting on H28 to models - When ordered together with an H28 to splitter, it will be delivered pre-assembled Lredpfx As Adkp Sol Teu

Condition: used, Removed from working unit. Please check out our other listings as well. Lsdpfxowxax Dj Al Tjru

Condition: new, Description The VP17 Vogesenblitz log splitter offers a splitting force of 17 tons and is powered via the power take-off shaft. It features a robust, quiet cast iron pump and complies with the safety standard EN 609-1. With a simple two-hand operation and two splitting speeds, it enables a maximum splitting length of 115 cm and a cylinder stroke of 105 cm, which can be lowered without tools. The standard patented mechanical log lifter with automatic locking, the rapid piston return, and the ergonomically designed splitting wedge enhance ease of operation. Other features include the replaceable splitting blade, the 9-way adjustable log clamp, a three-point linkage of categories I and II, and a powder coating for durability. Holders for an axe and hatchet are also provided. - 17 tons splitting force - Power take-off drive - Cast iron pump, robust and quiet - Complies with safety standard EN 609-1 - Simple and smooth two-hand operation - 2 splitting speeds - Splitting length 115 cm, cylinder stroke 105 cm, can be lowered without tools - Patented mechanical log lifter as standard, with automatic locking - Full steel base plate with beveled edges - Rapid piston return - Ergonomically designed splitting wedge - Splitting blade length 265 mm - Replaceable splitting blade - Left operating lever with 9-way adjustable log clamp and gas spring (for wood length from 77 cm and diameter from 8 cm) - Brass guide with grease nipples - Three-point linkage Cat. I and II - Holder for axe & hatchet - Powder coated Hydr. winch with remote control: - Pulling force approx. 600 kg - Cable speed up to 0.5 m/s - 20 m cable incl. cable hook with safety device - Cable diameter 6 mm Lodpo Adlg Sefx Al Tjru - Weight 75 kg - Transmitter: with 3 AAA batteries; 1.5 Volt, 4 buttons (On / Off / Reel In / Reel Out), 64 different frequencies, weight 120 g - Receiver: 12 Volt DC from the tractor, incl. cable and 7-pole plug - In the event of a power failure, the valve can also be switched manually. (Overall height in transport position with winch ~213 cm) Speed 1 (cm/s): 11.8 Pump capacity (L/min): 57 Drive: Power take-off drive Opening width (cm): 115 Dimensions (H x L x W cm) (*Working position - Transport position): 262-200 x 135 x 120 Speed 2 (cm/s): 27.9 Piston return (cm/s): 17.6 Tank capacity (L): 28 Pump: Cast iron pump Splitting force (tons): 17

Condition: new, Description The VPE17 Vogesenblitz log splitter offers an impressive splitting force of 17 tons and combines a PTO drive with a robust, quiet cast iron pump and an electric motor with 400 V / 4.8 kW and a double pump. The device meets the safety standard EN 609-1 and features a user-friendly two-hand operation and two splitting speeds. With a maximum splitting length of 115 cm and a tool-free adjustable cylinder stroke of 105 cm, it is very flexible. As standard, it is equipped with a patented mechanical log lifter with automatic locking. Other features include a full steel base plate, a quick piston return, an ergonomically shaped splitting wedge and an interchangeable splitting blade with a length of 265 mm. The left-hand control lever offers a 9-position adjustable gripping claw. The device is suitable for the three-point linkage of categories I and II and has holders for an ax and a hatchet. The powder-coated surface ensures durability. - 17 tons splitting force - Combined drive via PTO with cast iron pump and electric motor 400 V / 4.8 kW with double pump - Cast iron pump, robust and quiet - Complies with safety standard EN 609-1 - Simple and easy-to-use two-hand operation - 2 splitting speeds - Splitting length 115 cm, cylinder stroke 105 cm, tool-free adjustable - Patented mechanical log lifter as standard, with automatic locking - Full steel base plate with beveled edges - Quick piston return - Ergonomically shaped splitting wedge - Splitting blade length 265 mm - Interchangeable splitting blade - Left control lever with 9-position adjustable gripping claw and gas spring (for wood lengths from 77 cm and diameter from 8 cm) - Brass guide with grease nipples - Three-point linkage cat. I and II - Holder for ax & hatchet - Powder coated Hydr. winch with remote control: - Pulling force approx. 600 kg - Rope speed up to 0.5 m/s - 20 m rope incl. rope hook with safety device - Rope diameter 6 mm - Weight 75 kg - Transmitter: with 3 AAA batteries, 1.5 Volt, 4 buttons (On / Off / Reel in / Reel out); 64 different frequencies, weight 120 g - Receiver: 12 Volt DC from the tractor, incl. cable and 7-pole plug - In case of a power failure, the valve can also be operated manually. (Total height in transport position with winch ~213cm) Lrjdpe Adlbcefx Al Tsu Dimensions (H x L x W cm) (*Working position - Transport position): 262-200* x 135 x 120 Tank capacity (L): 28 Piston return (cm/s): 17.6 / 14.2 Splitting force (tons): 17 Pump output (L/min): 57 / 43 Speed 2 (cm/s): 27.9 / 21.0 Speed 1 (cm/s): 11.8 / 9.5 Opening width (cm): 115 Drive: PTO drive and electric motor 400 V Pump: Cast iron / Double

Condition: new, Description The VH22 Vogesenblitz wood splitter offers an impressive splitting force of 22 tons and is powered by the tractor's hydraulic system. It complies with the safety standard EN 609-1 and features a simple two-hand control as well as two splitting speeds. The maximum splitting length is 115 cm, and the cylinder stroke can be lowered without tools and is 105 cm. A patented mechanical log lifter with automatic locking is included as standard. Other features include rapid piston retraction, an ergonomically shaped splitting wedge, and an interchangeable splitting knife with a length of 265 mm. The left control console features a 9-position adjustable clamping claw, while the brass guide is equipped with grease fittings. The wood splitter has a robust, all-steel base plate, is mounted via a three-point linkage of categories I and II, and offers holders for an ax and a hatchet. The powder-coated surface ensures durability. - 22 tons of splitting force - Powered by tractor hydraulics - Complies with safety standard EN 609-1 - Simple and easy-to-use two-hand control - 2 splitting speeds - Splitting length 115 cm, cylinder stroke 105 cm, can be lowered without tools - Patented mechanical log lifter included as standard, with automatic locking - All-steel base plate with beveled edges - Rapid piston retraction - Ergonomically shaped splitting wedge - Splitting knife length 265 mm - Interchangeable splitting knife - Left control lever with 9-position adjustable clamping claw and gas spring (for wood lengths from 77 cm and diameters from 8 cm) - Brass guide with grease fittings - Three-point linkage Cat. I and II - Holder for ax & hatchet - Powder-coated Hydraulic winch with remote control: - Pulling force approx. 600 kg - Cable speed up to 0.5 m/s - 20 m cable incl. cable hook with safety catch - Cable Ø 6 mm - Weight 75 kg - Transmitter: with 3 AAA batteries; 1.5 Volt, 4 buttons (On / Off / In / Out), 64 different frequencies, weight 120 g - Receiver: 12 Volt DC from the tractor, incl. cable and 7-pole plug - In the event of a power failure, the valve can also be switched manually. (Overall height in transport position with winch ~213 cm) Container capacity (L): depends on the tractor's hydraulic performance Piston retraction (cm/s): depends on the tractor's hydraulic performance Splitting force (tons): 22 Speed 1 (cm/s): depends on the tractor's hydraulic performance Opening width (cm): 115 Lrodpfxe Adk A Ej Al Tou Drive: Tractor hydraulics Pump capacity (L/min): depends on the tractor's hydraulic performance Speed 2 (cm/s): depends on the tractor's hydraulic performance Dimensions (HxLxW cm) (*Working position - Transport position): 264-202* x155 x150

Condition: good (used), High-frequency ignition device, heating, gas and oil burners, control box, combustion control, burner control -Manufacturer: Landis & Gyr, firing control -Type: LOK16.250A27 Lrsdpfxjxnk Eqo Al Tsu -Dimensions: 105/105/H125 mm -Weight: 1.2 kg

Condition: new, Description Lrodpfx Ao Ab S Ansl Tou The PERZL RZ 180 is a high-quality forestry grapple equipped with a powerful radio-controlled winch. The grapple has an opening width of 1800 mm and is ideal for use in timber harvesting. It is supplied without a protective guard and is fitted as standard with a 3-point linkage and upper and lower pivot pins. The grapple features two double-acting hydraulic connections and a feed line with return line for the winch. The radio-controlled winch has a pulling force of 1.7 tons and provides additional power with a 40 m long, 7 mm thick steel cable, which has a breaking load of 3.4 tons. Its cable speed is approximately 0.5 m/s. The grapple itself is made of high-strength fine-grained steel QSTE700 and offers a closing force of 9.5 tons at 180 bar. With an unladen weight of 430 kg, it measures 1,000 mm in width, 1,220 mm in length, and 2,300 mm in height. This quality product is manufactured in Germany and meets the highest standards of efficiency and robustness. - Forestry grapple with radio-controlled winch, without protective guard - Equipped with a 40 m cable, pulling force: 1.7 t - Standard with 3-point linkage - Upper and lower pivot pins - 2x double-acting hydraulic connection for grapple - 1x feed line with return line for winch - Made of high-strength fine-grained steel QSTE700 - Quality product from PERZL, manufactured in Germany Technical data radio winch: - Radio-controlled winch incl. receiver & handheld transmitter (12 V power supply from the tractor required) - Pulling force 1.7 t - Incl. 40 m / 7 mm compacted steel cable, breaking load 3.4 t - Cable speed approx. 0.5 m/s - Unladen weight approx. 60 kg (without forestry grapple) Swivel range left and right: 98° each Closing force: 9.5 t at 180 bar Length in closed condition: 1,300 mm Smallest diameter: 80 mm For tractors from: 75 hp Width in closed condition: 1,000 mm Opening width: 1800 mm Height: 1,300 mm

Condition: new, Description The PERZL log grapple RZ 180 is a high-quality tool equipped with a radio-controlled cable winch and a protective guard. It offers an opening width of 1,800 mm and is ideal for use in forestry applications. The log grapple has a pulling force of 1.7 t and is equipped with a 40 m long, compacted steel cable with a breaking load of 3.4 t. The grapple is standardly equipped with a 3-point hitch, as well as upper and lower link pins, and features two double-acting hydraulic connections and a feed line with return line for the cable winch. Made from high-strength fine-grain steel QSTE700, it offers a closing force of 9.5 t at 180 bar and can swivel approximately 98° in both directions. The radio-controlled winch requires a 12 V power supply from the tractor and has a cable speed of approximately 0.5 m/s. With a weight of approximately 60 kg (without the log grapple) and an overall grapple width of 1,000 mm, overall length of 1,220 mm, and overall height of 2,300 mm, the log grapple is robust and functional. A quality product from PERZL, manufactured in Germany. - Log grapple with radio-controlled cable winch and protective guard - Equipped with a 40 m cable, pulling force: 1.7 t - Standardly equipped with a 3-point hitch - Upper and lower link pins - 2x double-acting hydraulic connection for the grapple - 1x feed line with return line for the cable winch - Made of high-strength fine-grain steel QSTE700 - Quality product from PERZL, manufactured in Germany Technical data of the radio-controlled winch: - Radio-controlled cable winch incl. receiver & handheld transmitter (12 V power supply from the tractor required) - Pulling force 1.7 t - Incl. 40 m / 7 mm compacted steel cable, breaking load 3.4 t - Cable speed approx. 0.5 m/s - Protective guard - Weight approx. 60 kg (without the log grapple) Closing force: 9.5 t at 180 bar Lsdpfo Ab S Ahjx Al Teru Smallest diameter: 80 mm Width in closed condition: 1,000 mm Swivel range left and right: 98° Length in closed condition: 1,300 mm For tractors from: 75 HP Opening width: 1,800 mm Height: 1,300 mm

Condition: new, Description The VP16 Vogesenblitz is a powerful wood splitter with a splitting force of 16 tons, driven by a power take-off and a 45-liter pump. This compact splitter features a lowerable cylinder with a quick-release mechanism for a transport height of 1.90 m and is equipped with a three-point linkage of categories I and II. Safety is ensured by an easy-to-use 2-hand safety circuit. With two splitting speeds and a quick piston return, it offers efficient operation. The ergonomically designed splitting wedge with a splitting blade length of 245 mm is replaceable and provides additional safety according to EN609-1 thanks to the mechanical log lifter. Other features include a holder for an axe and hatchet, brass guides, a robust full-steel base plate, and a powder-coated surface. - 16 tons splitting force - Drive via power take-off, 45-liter pump - Compact splitter with lowerable cylinder (quick release) for a transport height of 1.90 m - Three-point linkage cat. I and II - Easy-to-use 2-hand safety circuit - 2 splitting speeds - Quick piston return - Ergonomically shaped splitting wedge - Splitting blade length 245 mm - Replaceable splitting blade Lrodpfxs Adlgro Al Tsu - According to EN609-1, including a mechanical log lifter - Holder for axe and hatchet - Brass guides - Full-steel base plate - Powder-coated Winch with remote control: - 20 m cable, Ø 6 mm - Cable speed approx. 0 - 0.5 m/sec - Pulling force up to approx. 600 kg - Transmitter: with 3 AAA batteries; 1.5 Volt, 4 buttons (On / Off / In / Out), 64 different frequencies, weight 120 g - Receiver: 12 Volt DC from the tractor; including cable and plug - In case of a power failure, the valve can also be switched manually. (Overall height in transport position with winch ~213cm) Speed 1 (cm/s): 10.6 Opening width (cm): 108 Speed 2 (cm/s): 27.8 Dimensions (H x L x W cm) (*Working position - Transport position): 250-190* x 120 x 110 Container capacity (L): 28 Pump capacity (L/min): 54 Pump: Single Piston return (cm/s): 16 Splitting force (tons): 16 Drive: Power take-off drive

Condition: new, Description The VP12 Vogesenblitz log splitter offers a splitting force of 12 tons and is operated via a power take-off shaft with a 37-liter pump. It features a compact, lowerable cylinder for a transport height of 1.90 m and a three-point linkage of categories I and II. The easy-to-use two-hand safety switch, two splitting speeds, and the fast piston return increase ease of operation. The ergonomically shaped splitting wedge and the replaceable splitting knife with a length of 245 mm ensure flexible operation. Other features include construction compliant with EN 609-1, a mechanical log lifter, holders for an axe and hatchet, brass guides, and a robust all-steel base plate with a powder-coated surface. - 12 tons splitting force - Drive via power take-off shaft, 37-liter pump - Compact splitter with lowerable cylinder (quick release) for a transport height of 1.90 m - Three-point linkage Cat. I and II - Easy-to-use 2-hand safety switch - 2 splitting speeds - Fast piston return - Ergonomically shaped splitting wedge - Splitting knife length 245 mm - Replaceable splitting knife - Compliant with EN609-1, incl. mechanical log lifter - Holder for axe & hatchet - Brass guides - All-steel base plate - Powder-coated Hydraulic winch with remote control: - Pulling force approx. 600 kg - Cable speed up to 0.5 m/s - 20 m cable incl. cable hook with safety device - Cable Ø 6 mm - Weight 75 kg - Transmitter: with 3 AAA batteries; 1.5 Volt, 4 buttons (On / Off / In / Out), 64 different frequencies, weight 120 g - Receiver: 12 Volt DC from the tractor, incl. cable and 7-pin plug - In the event of a power failure, the valve can also be switched manually. (Overall height in transport position with winch ~213 cm) Speed 1 (cm/s): 11.4 Dimensions (H x L x W cm) (*Working position - Transport position): 250-190 x 120 x 110 Piston return (cm/s): 18.9 Pump: Single Pump capacity (L/min): 37 Opening width (cm): 108 Speed 2 (cm/s): 25.6 Drive: Power take-off drive Tank capacity (L): 28 Splitting force (tons): 12 Lrsdpfs Adldksx Al Teu