Used Faccin Profile Bending Machine Faccin Rcmi 130 for sale (69,328)

Condition: excellent (used), Year of construction: 2013, controller manufacturer: ELFRAN Digital Read Out, number of rollers: 3, shaft diameter: 130 mm, overall weight: 5,800 kg, total length: 2,200 mm, total width: 2,400 mm, total height: 2,000 mm, Profile bending machine FACCIN - RCMI 130 MACH-ID 9451 Make: FACCIN Type: RCMI 130 Control: ELFRAN Digital Read Out Year: 2013 3 rolls driven 2 lateral guide rolls Digital readout for position rolls Set hardned universal rolls Set hardned profile rolls Horizontal and vertical:|Horizontal and Vertical Shaft Ø: 130mm Number of rolls: 3 Guodpfsyrq Dvex Adgjb Capacity flat: 240 x 30 x 1000mm Capacity Tube: 140 x 5 x 1500Ø x mm Capacity bar: 80 x 80 x 900mm Capacity T-Profile: 140 x 15 x 1400mm Capacity HEA-Profile: 160 x 1700mm Working speed: 0 - 6000mm/min. Side supports: 2 x Hydraulic side arms Length: 2200mm Width: 2400mm Height: 2000mm Weight: 5800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, functionality: fully functional, Year of construction: 2026, Technical characteristics: Section modulus 100 cm³ Main shaft diameter 130 mm Side shaft diameter 130 mm Outside diameter of the bending rolls 410 mm Adjustable rolling speed 0-6 m/min Installed power 18.4 kW (25 hp) Length 1,900mm Width 2,200mm Height 1,900mm Weight 5,720 kg Standard equipment: Hydraulic adjustment of the side rolls Guodpfxjd Eqg Nj Adgob 3 rolls driven (3 hydraulic motors + 3 planetary reduction gears) Independent lateral profile guide rolls, adjustable in 6 directions, fully hydraulic Automatic scope rotation speed compensation Complete universal rolls set for standard profiles and beams (12 pieces) Tool kit for machine equipment Low-voltage control on mobile operator panel Safety device according to regulations Technical documentation and CE certificates Digital displays for the roller position of the side rollers Optional, installed: Siemens NC control PGS-CLASSIC

Condition: good (used), Year of construction: 1999, overall weight: 2,900 kg, total length: 1,800 mm, total width: 1,900 mm, total height: 2,200 mm, Length:1800mm Gsdpfoycu E Eox Adgsub Width:1900mm Height:2200mm Weight:2900kg

Condition: good (used), profile bending machine Guodpfx Adswtph Dsgsb

Condition: good (used), Year of construction: 2018, Manufacturer: INDUCTAFLEX Type: AL-3e Control system: ACCURATE touch screen Year of construction: 2018 3 rolls driven servo Torq each roller 3500 nM Electrically support rolls Intelligent software : Ellipse program U Bend shapes control of tangents Auto section detector Specifications Metric US Standard Horizontal and Vertical Horizontal Axis Ø Gsdpfx Adjvd Dftjgsub 105 mm Number of rollers 3 Stroke X axis 0 - 400 mm Dimensions (estimate) length 4500 mm width 3200 mm height 2700 mm weight 3300 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, total length: 1,000 mm, total width: 750 mm, total height: 1,400 mm, Colour: Grey Empty weight: 400 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Power [kW]: 1.5 - Shaft diameter [mm]: 50 - Moment of resistance [cm³]: 6 - Top roll diameter [mm]: 50 - Bottom roll diameter [mm]: 50 - Capacity diameter round [mm]: 35 - Transport dimensions: 1000mm x 750mm x 1400mm (l x w x h) - Transport weight [kg]: 400kg Financial information VAT: The price shown is exclusive of VAT Gusdpfeypk Ebox Adgjb VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), functionality: fully functional, Year of construction: 2015, The Sahinler HPK 80 profile bending machine is a heavy-duty hydraulic section bender with 3 driven rolls for precise bending of steel profiles, tubes, and box sections. The machine is suitable for industrial use in steel construction and mechanical engineering, offering a robust build with high bending capacity and reliable repeat accuracy. Guedpey Rrh Iefx Adgeb

Condition: like new (used), Year of construction: 1998, Technical Data: Gsdpfx Aoy Rxuzodgeub 2 hydraulically adjustable rollers 3 driven rollers Display with digital readout Bending moment: 110 cm/3 Shaft diameter: 180 mm Roller diameter: 460 mm Main motor power: 15 kW Dimensions (L x W x H): approx. 2400 x 2000 x 1600 mm Weight: approx. 7.8 t Accessories: Various tools Condition: Very good, almost as new The seller assumes no liability for typing or data transmission errors. The machine complies with its age in terms of appearance, technology, and wear; used machines are sold without any warranty.

Condition: used, functionality: fully functional, We currently have a Roundo bending machine available for sale. This machine is capable of bending large-size wide-flange beams — even when cold — into radii or cambered shapes. It is a robust and versatile unit, ideal for companies looking to enhance or expand their steel-forming capabilities. Gjdpfxsxn I Rws Adgoub

Condition: used, Year of construction: 2004, Machine information Godpfx Adsy Nlnfjgeub Type of machine: Profile bending machine Brand: COMAC Model: 308 Year of manufacture: 2004 Fully functional profile bending machine with roller sets for large profiles, e.g. steel beams 120 HEB

Condition: new, Year of construction: 2024, shaft diameter: 80 mm, Profile bending machine AHB 100 - with universal rollers - Three roller drive - Digital display left and right bending axis - Hydraulic lateral rectifier - Hydraulic drive of the bending rollers - Vertical and horizontal operation - built according to CE standards - Bending capacity flat bars max. 12 x 20 mm - Flat bent 200 x 40 mm - U profile inside and outside 180 mm - Angle profile web outside 100x100 mm - Angle profile web inside 90x90 mm - Solid material round 75 mm - INP 140 - Shaft diameter 100 mm - Roller diameter 315 mm Guodpevaw Elsfx Adgob - Bending speed 5 m/min. - Motor power 11 KW - Weight 2600 kg - module max Wcm3 -400 Volt 50 Hz. 3 ph. -1950x1600x2100 mm

Condition: excellent (used), Profile Bending Machine SOCAD type CP 13.8 Outer wing angle capacity: 80x80x8 mm Flat on field capacity: 55 x 30 mm Flat on flat capacity: 75 x 20 mm T capacity: 80 x 80 mm Square capacity: 55 x 55 mm Equippeed with 1 fluted trainer roller Ø 300 x Ht 150 mm + 2 rollers Ø 260 x thickness 110 mm Voltage: 380 V Motor power: 8 CV Dimensions (L x W x H): 1800 x 1200 x 1400 mm Weight: 2,5 T Godpfx Adexnnaljgoub

Condition: good (used), Brand Ercolina Model CE40H3 Year of manufacture 2006 Hydraulic drive Roller diameter Ø 165 mm Shaft Ø 40 mm Tube capacity (thin-walled) Ø 70x1.5 mm min. Ø 700 mm Tube capacity (thick-walled) Ø 2" x 3.2 mm min. Ø 450 mm Angle section capacity 50x50x6 mm min. Ø 400 mm Flat bar capacity 50x10 mm min. Ø 250 mm Flat bar capacity (hard edge) 100x15 mm min. Ø 250 mm Box section capacity 50x50x3 mm min. Ø 500 mm Shaft capacity Ø 35 mm min. Ø 250 mm Gsdpfxow Hx Tve Adgeub Power 1.85 kW Bending speed 10 rpm.

Condition: new, functionality: fully functional, Year of construction: 2022, machine/vehicle number: 111/52, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, Equipment: documentation/manual, foot remote control, For sale: New/unused Amob MAH 40/3 CNC profile bending machine. We purchased the machine new from Maqfort in 2022. Due to relocation of production and changes in the order profile, we found no use for the machine; it has not even been connected or commissioned. Therefore, it is a brand new machine. Equipment: Hydraulically controlled top roller feed / Can be operated in both vertical and horizontal positions / 3 mechanically driven rollers / Manually adjustable side rolls / CNC control / Movable foot pedal includes digital display, 2 pedals, emergency stop button / 3 standard (hardened) tooling rollers. Price: 25,153 euros. Gusdpjy Hn Uvsfx Adgsb In case of sale, Maqfort will provide installation, commissioning and staff training according to agreement.

Condition: used, functionality: fully functional, Year of construction: 2011, Used profile bending machine from SAF Type: DS 60 HP Plus Shaft diameter: 50 mm Gjdpfxey Atidj Adgjub 3 driven rolls Digital readout with program option 1 set of rolls for flat and box material Year of manufacture: 2011 (delivered 2014)

Condition: new, Year of construction: 2026, number of rollers: 3, shaft diameter: 60 mm, overall weight: 1,080 kg, Equipment: documentation/manual, emergency stop, hardened rollers, - Ring bending machine - Shaft diameter 60 mm - The two lower rollers are hydraulically driven - Three rollers are driven - 2 digital displays - Brake motor - Can be used horizontally/vertically - Mobile control panel Guedpfxjgg N Amo Adgsb - Emergency stop - Documentation - 400 V

Condition: ready for operation (used), Year of construction: 1966, A Häusler rolling and bending machine is available. Number of rollers: 3, section modulus: 46cm², max. flat material capacity at 1000mm: 100mm/20mm, max. pipe capacity at 900mm: 102mm/6mm, max. square material capacity at 600mm: 60mm/60mm, max. T-profile capacity at 1200mm: 1200mm/1200mm/13mm, shaft diameter range: 125mm-135mm, machine dimensions X/Y/Z: approx. 4500mm/1700mm/1500mm, weight: approx. 6500kg. An on-site inspection is possible. Gujdpfx Ajy Ax U Eedgsb

Condition: good (used), functionality: fully functional, Plate Rolling Machine XZPP 100/16 Shaft diameter: 100 mm Roll diameter: 450 mm Max. strength of rolled material: 392 MPa Rolling speed: 0-6 m/min Total machine power: 11 kW Machine dimensions (L x W x H): 1570 x 1434 x 1578 mm Guedpey D A Nvefx Adgsb Machine weight: 3950 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: 18105876-5772, shaft diameter: 360 mm, roller diameter: 800 mm, overall weight: 46,000 kg, total length: 4,500 mm, total width: 4,850 mm, total height: 3,750 mm, operating speed: 6 mm/s, Certified shafts made of forged NiCrMo alloy steel + Protected with height adjustment system (PHAS) Gedpfewayt Rex Adgsub Quick bending roll configuration change system (TIMS Technology) Side guide rollers adjustable in 6 directions with fully hydraulic controls Steplessly adjustable rotation speed and simultaneous shaft movements Operating switches on a centrally movable control panel

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 450 kg, input voltage: 400 V, total length: 900 mm, total width: 850 mm, total height: 1,700 mm, Technical Specifications Material: round / rectangular tube: 70 × 2 mm / 60 × 60 × 3 mm Material: round / square bar: 35 mm / 35 × 35 mm (diameter) Roller diameter: 50 mm Motor power: 2.2 kW Power supply: 3-phase, 400 V Dimensions (L × W × H): 900 × 850 × 1700 mm Gjdpfoytffwjx Adgeub Weight: 450 kg Delivery Terms The machine is brand new 12-month warranty Warranty service Post-warranty service CE Declaration of Conformity Technical documentation (DTR) in English Delivery to the customer is possible. The delivery cost is determined individually according to the carrier’s quotation. If you are interested in other machines, we encourage you to visit our website.

Condition: used, total length: 1,330 mm, total width: 1,040 mm, total height: 1,150 mm, Empty weight: 1.800 kg Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - Shaft diameter [mm]: 85 - Capacity diameter round [mm]: 60 - Transport dimensions: 1330mm x 1040mm x 1150mm (l x w x h) Gusdoxuf Slepfx Adgeb - Transport weight [kg]: 1800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2025, total length: 1,200 mm, total width: 800 mm, total height: 1,800 mm, Empty weight: 450 kg Price: On request - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: PB12093N2025005 - Operating hours: 0 - Drive system: Conventional - Number of rolls [pcs.]: 3 - Power [kW]: 1.5 - Shaft diameter [mm]: 155 - Capacity diameter round [mm]: 50 - Transport dimensions: 1200mm x 800mm x 1800mm (l x w x h) - Transport weight [kg]: 450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Godpfx Aexixrhedgeub VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2001, total length: 1,200 mm, total width: 800 mm, total height: 1,700 mm, Empty weight: 500 kg 3 mech. driven rolls (brake motor) hardened shafts top roll hydraulic adjustable hardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation double foot pedal forfor- and backward drive - Year: 2001 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 371 - Drive system: Conventional - Vertical/Horizontal: Horizontal and vertical - Number of rolls [pcs.]: 3 Gedowu Tnkepfx Adgoub - Number of driven rolls [pcs]: 3 - Power [kW]: 1.1 - Shaft diameter [mm]: 50 - Transport dimensions: 1200mm x 800mm x 1700mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2026, control type: NC control, degree of automation: automatic, actuation type: hydraulic, power: 22 kW (29.91 HP), Equipment: CE marking, emergency stop, foot remote control, CRONOSSTECH PKH 160 Profile Bending Machine The CRONOSSTECH PKH 160 model offers maximum efficiency in heavy-duty profile bending applications thanks to its robust construction and powerful hydraulic system. All three rolls are driven, enabling stable and precise bending without slippage. Key Advantages - Three rolls driven by hydraulic motors - High-strength, durable construction - Horizontal and vertical operating capability - Digital displays for precise bending - Heavy-duty industrial application Areas of Use - Steel construction fabrication - Tube and profile bending applications - Machinery and equipment manufacturing - Shipyard and marine industry - Automotive and auxiliary industries Standard Features Gujdpfx Ajy Hgwiedgjb - Welded steel frame construction - Three rolls driven by hydraulic motors and planetary gearboxes (individual planetary gear for each roll) - Hardened and ground shafts made from special high-strength materials - Hardened standard rolls - Mobile and independent control panel - Horizontal and vertical working positions - Dual-speed operating system - Digital displays (2 units) - Three-way hydraulic side supports Optional Features - Special rolls, bending and reducing tools - NC control system Technical Specifications – PKH 160 - Roll diameter: Ø160 mm - Roll bearing diameter: Ø500 mm - Working speed: 3 – 6 m/min - Motor power: 22 kW - Machine length: 2500 mm - Machine width: 2350 mm - Machine height: 2600 mm - Weight: 10,700 kg Production Note: This machine is manufactured by CRONOSSTECH in Turkey. It is designed in line with high-quality standards and is suitable for industrial use.

Condition: like new (used), functionality: fully functional, Year of construction: 1995, machine/vehicle number: 956158, control type: manual, number of rollers: 3, shaft diameter: 75 mm, overall weight: 1,300 kg, total length: 1,000 mm, total width: 1,130 mm, total height: 1,100 mm, power: 4 kW (5.44 HP), input voltage: 380 V, SOLD ROUNDO (Sweden) electro-hydraulic section bending machine Model: R-3 Capacity: 14 cm3 Machine no.: 956158 Delivered to agent: 10-1995 Delivered to customer: 26-7-1996 Dimensions: 1 x 1.13 x 1.1 m Weight: 1,300 kg Shaft diameter: Ø 75 mm Motor power: 4 kW - Hydraulic machine - Can operate in horizontal or vertical position - 3 driven rolls Includes: Brake motor Push-button control Digital read-out 1 extra set of rolls for pipe Ø 48 and Ø 42 mm Dutch-language manual Price of the ROUNDO section bending machine, model R-3: on request via email The machine has its original paint and has seen very little use! Delivery conditions: Delivery time: ex stock, subject to prior sale Delivery: ex works Baarle-Nassau Payment: before collection Prices: net, excluding VAT Machinehandel De Leeuw BV is one of the few companies in Europe specializing in trading and stocking mainly used Kardex Remstar VLM automatic lift (shuttle systems) & rotary storage systems (paternoster systems). See our website for our current stock list. We assemble and/or disassemble these systems in a safe manner with VCA-certified technicians, and have been doing so for over 33 years. We also dismantle other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard Machinehandel De Leeuw BV Oordeelsestraat 7–B 5111 PA Baarle-Nassau Guedpfx Adexl Sq Aegeb The Netherlands