Used Fischer & Krecke Flexpress 16S8 for sale (221)

Condition: good (used), Year of construction: 2005, operating hours: 7,500 h, functionality: fully functional, machine/vehicle number: 3149, Fischer&Krecke Flexpress 16S with 1250 mm printing width. The machine is still in operation and can be viewed at any time. Fully functional and in well-maintained condition. Cgedjxqmn Tspfx Appeu

Condition: ready for operation (used), Year of construction: 2005, A complete 8-color Fischer & Krecke flexographic printing system is available. Number of colors: 8, max. print width: 1250mm, max. material width: 1300mm, repeat print length min./max.: 320mm/800mm, max. mechanical speed: 360m/min, printable materials: PET (min. 12µm)/PP/OPP/LDPE/laminate materials. Inks: solvent-based, drying: thermal oil. Roll diameter: 800mm, core diameter: 76mm/152mm. Including BST Video Web Inspection System Premius, cleaning system Flexpress AutoClean (ACA), viscosity control Bloss Viscolor 1300, automatic roll change and rewind Flying Splice as well as an additional chill roll with a diameter of 460mm. Documentation available. On-site inspection is possible. Cgjdovva E Hepfx Appou

Condition: like new (used), Year of construction: 2005, functionality: fully functional, GEARLESS FLEXOGRAPHIC PRINTING PRESS F&K FLEXPRESS 16S/10 Central impression flexographic printing press Manufacturer: Marga Fischer & Krecke Cgedjzafipopfx Appju Model: Flexpress 16S/10 Gearless 10 colors Materials that can be printed: PE, PP, OPP, PET, PA. Mechanical speed up to 460 m/min Maximum material width: 1200 mm Maximum printing width: 1150 mm Minimum/maximum print repeat: 370/800 mm Fully automatic turret unwinder and rewinder Unwinder inner diameter: 76 and 152 mm Rewinder inner diameter: 76 mm Maximum coil diameter: 1000 mm Thermal oil drying system Corona treater: 2 units AVT 100% camera system Bloss viscometers Year: 2005

Condition: used, Year of construction: 1978, functionality: fully functional, FISCHER & KRECKE 31 DF Type: Rotary flexographic printing machine Model: 31 DF | Year of manufacture: 1978 Manufacturer: Fischer & Krecke, Bielefeld, Germany Machine purpose: The machine is designed for flexographic printing on paper and various types of films, both for independent use and in a line with other machines (e.g., for bag production, cutting, or lamination). It is ideal for printing packaging materials, labels, bags, and other paper products in various weights. The machine is fully functional. Technical parameters Input material: • Number of rolls: 1 • Core diameter: 70, 76, 100, 150 mm • Max. roll width: 89 cm (throughput) • Max. roll diameter: 125 cm • Printing width: max. 85 cm • Material weight: 15–350 g/m² Printing: • Number of colors: 1–4 • Printing line: max. 64 lpi • Printing repeat: 290–660 mm • Speed: up to 250 m/min Longitudinal cut: • up to 60 g/m²: approx. 2 × 4 cm • over 60 g/m²: approx. 2 × 3 cm Gluing: paper + microtene, hot melt adhesive Output: • Core diameter: 70, 76 mm • Max. roll diameter: 107 cm Fischer Krecke 31DF printing cylinders Repeat number of cylinders number of gears Repeat number of cylinders number of Codpfoy Uc Uysx Appogu gears REPEAT NUMBER OF CYLINDERS NUMBER OF GEAR WHEELS 290 3 3 300 4 4 310 4 4 320 4 4 330 4 4 340 4 4 350 4 4 360 4 4 370 4 4 380 4 4 400 4 4 420 4 4 440 4 4 460 4 4 480 4 4 500 4 4 520 4 4 540 4 4 560 4 4 630 2 2 660 3 3

Condition: used, Year of construction: 1995, Colors: 8 Gearless: No Fast Sleeve Change: No 4 motor CNC per printing deck: Yes Computer Supervision: Yes Web Width: 1320 mm Print Width: 1300 mm Min. Print Repeat: 380 mm Max. Print Repeat: 1100 mm Mechanical Speed: 350 m/min Cedpfx Apjxzrx Espsgu Working Speed: Up to 300 m/min Unwinding & Winding: Turret, FLYING SPLICE, Max. Reel Diameter 1000 mm Drying: 2 Zones, 4 Fans, 2 Gas Burners Video Camera: Yes Corona Treatment: No Web Guides: FIFE Viscosity Control: Yes Wash System: Yes, F&K Ceramic Anilox Rollers + Closed Chamber Doctor Blade 1x 80 L/cm, 2x 200 L/cm, 2x 120 L/cm, 4x 200 L/cm, 2x 320 L/cm, 3x 400 L/cm 200 sleeves, repeat between 390 mm and 1090 mm (8 for each repeat: 390, 400, 410, 420, 430, 450, 480, 510, 530, 540, 550, 630, 660, 670, 740, 780, 800, 850, 880, 930, 990, 1030, 1050, 1090 mm + 8 twinlock 740 mm + 8 twinlock 1030 mm) Mandrels for sleeves: 6x360 mm, 6x400 mm, 6x420 mm, 8x460 mm, 8x530 mm, 6x560 mm, 12x620 mm, 8x780 mm, 8x850 mm, 15x990 mm Printing cylinders: 8x380 mm, 8x390 mm, 12x400 mm, 8x410 mm, 8x450 mm, 6x460 mm, 7x470 mm, 4x490 mm, 12x500 mm, 8x510 mm, 12x530 mm, 8x540 twinlock, 6x560 mm, 8x570 mm, 8x580 mm, 8x590 mm, 12x620 mm, 9x640 mm, 12x660 mm, 6x670 mm, 6x730 mm Overall Dimensions: Length = 17 m, Width = 5 m, Height = 6 m Central Drum Diameter: 2280 mm

Condition: ready for operation (used), Year of construction: 1994, Web width: Max 1250 Print width: 1230 mm Print repeat Max 760mm , Min 300mm Max. mechanical speed: 300 m/min Single unwind Max. unwind diameter: 1250 mm Drying type Boiler Substrate types: Paper, polyethylene (PE), polypropylene (PP), and other flexible packaging materials Cgsdjwvvwdjpfx Appsu Ink system: Solvent-based inks/water-based inks

Condition: used, Year of construction: 2005, sheet width 3100 mm plate thickness 12 mm distance between columns 3260 mm Cgjdjzbc Acepfx Appou back stop - adjustable 3 - 1250 mm power capacity 37 kW voltage 400 V weight of the machine ca. ca. 14 t dimensions of the machine ca. 4,00 x 4,00 x 2,20 m CNC-controlled plate shear

Condition: ready for operation (used), Year of construction: 2001, functionality: limited functionality, For sale is a Fischercope H100C XYp micro-/nano-hardness testing system by Helmut Fischer (year of manufacture: 2001). The device was last used in a laboratory, but is currently not fully functional and is therefore expressly sold as defective / for repair or as a source of spare parts. Known issues: - Table advance movement does not function correctly (the table is positioned under the measuring head, not under the microscope – precise measurement is currently not possible). Likely an electronic issue. - The measuring table moves independently to the left – possibly a joystick failure. - Indenter change does not work correctly (the probe does not move fully to the end stop). Cgjdpfx Apjyu Nabopju Therefore, the device is particularly suitable for: • Repair by individuals with electronics expertise • Sourcing of spare parts • Research / hobbyists The optical condition is good for its age.

Condition: excellent (used), functionality: fully functional, three-jaw chuck diameter: 160 mm, Three-jaw chuck eccentric – clamping chuck 1 piece used, very well-maintained Horvath Fischer eccentric clamping chuck (three-jaw chuck) with a diameter of 160 mm, maximum adjustable eccentricity: 25 mm, chuck mounting cylindrical with a diameter of 150 mm, complete with chuck key and one set of hardened stepped jaws as well as the installation and operation manual for the Horvath eccentric chuck, all likely in the original wooden box (Hahn & Kolb). Year of manufacture unknown. From our own inventory. Eccentric lathe chuck for clamping workpieces on a lathe. Price €195 net ex stock, plus packaging costs. All technical data subject to errors and omissions. Cedpfxeg Umb Eo Appogu We sell exclusively to countries of the European Community.

Condition: good (used), Cleaning booth for component cleaning using a high-pressure cleaner. Previously used for cleaning components after 3D printing (e.g., for removing support material). Operation via foot switch. In good condition. Codpfx Apoza T Nkopjgu

Condition: excellent (used), Fischer FISCHERSCOPE X-RAY XDL 240 Professional X-ray fluorescence measuring device / XRF analysis system Manufacturer: Helmut Fischer GmbH Type: FISCHERSCOPE X-RAY XDL 240 For sale is a professional Fischer X-ray fluorescence measuring system for coating thickness measurement, material analysis, material testing, and quality control. The device comes from commercial use and is offered including PC system, monitor, software, documentation, calibration standards, accessories, and tools, as shown in the pictures. Manufacturer: Helmut Fischer GmbH Made in Germany Type: XDL 240 Serial number: SN150004753 Supply voltage: 115 V Frequency: 50 - 60 Hz Power consumption: 120 W Fully shielded device according to RöV §8 Annex 2 No. 3 Approval number: BfS 11/07 V RöV Fischer WinFTM software available WinFTM XDL 240 Version 6.33 L-PDM PC system with HP computer, monitor, keyboard, and mouse. Original Fischer documentation, certificates, data storage media, USB dongle / license stick and other accessories available. EC Declaration of Conformity available. Certificate for the Full-Protection Instrument available. Calibration and reference standards and other measuring accessories as shown in the pictures are included. Suitable for coating thickness measurement, material analysis, quality control, laboratory applications, and industrial measurement technology. Used measuring system from industrial application. Optical condition, see pictures. The system starts up, software and user interface are visible. No further technical inspection or calibration has been carried out by us. Inspection and testing on site is possible and desired after prior arrangement. Important note: "The table shown in the photos is not part of the sale." Dimensions and weight: Dimensions: 57.0 x 76.0 x 65.0 cm Internal dimensions: 46.0 x 49.5 cm Cgsdpfxoy Ulalj Appou (maximum sample height depending on configuration) Power supply: Voltage: 100 - 240 V~ (AC) Frequency: 50 - 60 Hz Power consumption: 180 VA (Volt-Ampere) Weight: 120 kg Scope of delivery: FISCHERSCOPE X-RAY XDL 240 HP PC system Monitor Keyboard and mouse Software / data storage media USB dongle Calibration standards Tools Documentation and accessories as shown in the pictures Sale exclusively to commercial businesses. Sale is used, without guarantee, warranty, or return. All information provided to the best of our knowledge according to nameplates, documentation, and clearly identifiable data. Scope of delivery and condition, see pictures. We will be happy to answer any further questions by telephone or message.

Condition: used, functionality: unexamined, machine/vehicle number: DC18330, total width: 2,000 mm, total length: 2,000 mm, We are offering this used Johann Fischer Aschaffenburg measuring plate, type IDT009 – surface plate, spotting plate, marking-out plate, year of manufacture unknown. Manufacturer: Johann Fischer Aschaffenburg Origin: Made in Germany Type: Measuring plate Item number: IDT009 DC number: DC 18330 Inventory number: QS-00355 Inspection date: 23.3.03 If you have any questions or need further information, please feel free to send us a message or call us. Cedpfxoy H Dgbs Appegu

Year of construction: 2020, condition: used, FISCHER – Cantilever racking for installation in enclosed spaces. The racking must not be clad on-site without consulting FISCHER. Design according to the specifications. Racking No. 1 - single-sided (cantilever arms bolted on). Number of racks: The following information refers to 1 rack. 1 unit Number of uprights: 3 units Cjdpfxszab Rce Appsgu Racking length (center-to-center distance): 2,500 mm Distance between uprights: 2 x 1,250 mm Upright height (hole pitch 100 mm): approx. 2,500 mm Top storage level: 2,200 mm Foot length: 1st side/2nd side 2,000 / 0 mm Cantilever arm lengths (total length incl. end stop): 2,000 mm Cantilever arms: 1st side/2nd side 4 / 0 units Desired load capacity per cantilever arm: 500 kg Load capacity per upright side (without considering the foot): 2,000 kg Max. floor pressure: 0.11 kN/cm2 Shipping weight per rack: 607 kg Color of uprights: fire red, similar to RAL 3000 Color of cantilever arms: fire red, similar to RAL 3000 1 spray can The profile thickness applies to 100% utilization of the rack load capacity. Seismic zone could not be determined. A verifiable or tested static analysis is available for an additional charge. Text for the static calculation: Important note regarding the static calculation of the storage system: The static calculations take into account the fundamentals according to Eurocode (DIN EN 1991-1-1, DIN EN 1991-3 and DIN EN 1991-1-4) and the framework conditions of the respective national annexes (NA) applicable in the countries where the system will be installed. Since storage systems are usually installed in urban or industrial areas, the requirements applicable to these areas (e.g., for Germany, ground category III and IV) are included in the calculation. Important note regarding building permits, please note: Storage systems may require a permit according to the respective state building code. In the event of an order placed with Fischer, the client undertakes to obtain the necessary public-law permits for the storage system. If the permit is not granted, or the granted permit is revoked or withdrawn, the contractor shall not be liable for this. In the event of installation by Fischer, we generally assume that a valid building permit is in place at the time of installation. Any necessary verifiable static calculations for the building application can be obtained for a fee; please contact us. Cantilever racking: 1 unit 1,500.00 Foot rounding as a safety element: 3 units 13.50 per foot and side Storage location: Customer

Condition: used, Year of construction: 1974, length 450 mm width 250 mm height 1.250 mm accuracy +/- 1 ° distance between tapping holes H: 130 mm distance between tapping holes V: 150 mm Cgedpfx Apeydqnxjpsu distance between tapping holes H: 70 mm distance between tapping holes V: 200 mm JOHANN FISCHER - Measuring Angle

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 159879, 🔥 PREMIUM LISTING – FISCHER MFV-1224/50 HIGH-SPEED ELECTROSPINDLE 🔥 50,000 RPM | HSK-C32 | TOP CONDITION | READY FOR PRODUCTION High-end FISCHER MFV-1224 electrospindle available for sale – a premium solution for precision grinding and high-speed CNC machining. Ideal for demanding industrial environments where accuracy and reliability are critical. ⸻ ⚙️ Key Specifications • Model: FISCHER MFV-1224/50 • Maximum speed: 50,000 RPM • Tool interface: HSK-C32 (Automatic Tool Change) • Type: High-frequency electrospindle • Built for high precision & high-speed applications ⸻ ✅ Condition & Performance • Professionally tested and verified • Excellent running condition – smooth operation • No abnormal noise, no vibration • Spindle is ready for immediate installation • No crashes, no hidden defects ⸻ 🎯 Typical Applications • Internal & external grinding • High-speed milling • Precision machining (aerospace, molds, tooling) ⸻ 📦 What’s Included • Complete spindle unit (as shown) • Carefully packed for safe transport ⸻ 💎 Why this spindle? • Premium Swiss/German engineering quality • High reliability at extreme speeds • Excellent value compared to new (save thousands €) ⸻ 💰 Price: [5000€ – negotiable] 📍 Location: Romania 🌍 Worldwide shipping available ⸻ 📹 Extra Cgedpfsy Hpbwjx Appou • Running video available on request • Additional photos & technical details available ⸻ 📩 Serious inquiries only. Ready to ship – fast deal preferred.

Condition: good (used), Johann Fischer Aschaffenburg / Surface Plate / Measuring Table with Base Cabinet - Surface plate with substructure (mobile) - Table size: 1.5x0.6 meters - Accuracy: DIN 876 /1 - Mobile on base cabinet with drawers Dimensions (LxWxH): 1.5x0.6x0.9 meters / 550 kg Subject to errors and input mistakes. Cjdpfx Apoy Shaispogu

Condition: used, pressure 50 t chamfer lenght 1500 mm distance between columns 1220 mm Control Cybelec DNC 1200 closing speed 95 mm/min working feed 1-10 mm/sec work stroke 156 mm overrun time 59 ms tracking travel 6 mm throat 200 mm distance table - lower edge of ram 301 mm table width 160 mm table height 850 mm x-axis 550 mm travel R-axis +/- 50 Cgjdpfx Ajra Rrhoppsu Number of axles 3 (Y, X, R) St. weight ca. 3600 kg a lot of lower and upper tools incl. work light new control in 2003: Cybelec DNC 1200

Condition: used, Year of construction: 1993, press force 100 t stroke - 170 mm working lenght 3200 mm dayligth 450 mm table dimensions 3220 x 800 mm speed down 50 mm/s speed up 150 mm/s working speed 7 mm/s oil volume 600 l power requirement 20,0 kW Weight 16,0 t dimensions (WxDxH) 3,7 x 2,5 x 2,6 m SPECIAL DEAL Cjdpfxovuk Rds Appjgu as is where is, WITHOUT additional work free loaded to truck year of manufacture 1975 - modernization 1993

Condition: used, Year of construction: 2008, The Fischer milk pasteuriser 5000 is an industrial-grade machine designed for pasteurizing milk on a large scale. Here are some details about such a pasteuriser: - Capacity: The "5000" typically indicates that this pasteuriser can handle up to 5000 litres of milk per batch, making it suitable for large dairy processing operations. - Functionality: The pasteuriser is designed to heat milk to a specific temperature, holding it there for a required amount of time to eliminate harmful bacteria and pathogens while preserving the milk's quality and nutritional value. - Construction: Fischer machines are commonly made from stainless steel, ensuring hygiene and durability. The materials used are designed to withstand high temperatures and pressures encountered during the pasteurization process. - Design: It often features an insulated design for energy efficiency and may include a user-friendly control panel for monitoring and adjusting the pasteurisation parameters. - Efficiency: The pasteurising process is usually continuous, allowing for high throughput, which is essential for commercial operations to meet demand. - Temperature Control: It may include advanced temperature control systems to ensure precise pasteurization, which is crucial for product safety and quality. - Safety Features: Modern pasteurisers often come with safety mechanisms to prevent overheating or pressure build-up, ensuring safe operations. - Applications: Suitable for dairy farms, creameries, and food manufacturers looking to process large quantities of milk while adhering to health and safety regulations. Capacity: 5000 Litres per hour Temperatures: 4-55-65-78(90) - 55-65-4 c Stages exchange plates : 5 Outlets: Separator / Homogeniser / De Aerator / Holding Tube DeAerator: Included Cjdpsx Tdauofx Appjgu Heated: Steam with Heat Exchanger and Steam Valve Positioning Balance Tabk: Included Chart recorder: In control panel Control Panel: Included Divert Valve: Included Product Pump: Included Skid Mounted: On Stainless steel Skid Hot water Pump: Included Electrical Requirements: 3 phase 400 V / 50/60 hz Cooling: Connection with old water connection Condition: Still in use Available: 3 weeks from order

Condition: excellent (used), For sale: Professional Fischer DUALSCOPE DMP40 coating thickness gauge designed for non-destructive measurement of metallic and non-metallic coatings on various substrates such as steel, iron, aluminum, and other non-ferrous metals. • Condition: Very good, fully functional and ready for operation • Current PCA calibration certificate dated 05.11.2023 • Complete set in original case including probe, cables, calibration foils, adapter, manual, and certificate Specifications and benefits • Automatic substrate recognition (FE/NFE) and selection of the appropriate measurement method • Wide measuring range and high measurement precision • Color display with intuitive navigation menu in Polish • Functions for statistics, results recording, and data export • Non-destructive measurement – ideal for production quality control and laboratory testing • Compliance with ISO, ASTM, and DIN standards • Robust industrial housing suitable for both field and laboratory use The set includes • Fischer DUALSCOPE DMP40 gauge • Measurement probe • Measurement cables • Calibration foils • Measurement adapter • Original transport case • Fischer lanyard • User manual and PCA certificate Applications • Coating quality control in electroplating, painting, and automotive industries • Industrial production and research laboratories • Service measurements and technical inspections Cgjdexlu Taepfx Appsu

Condition: ready for operation (used), Johann Fischer 2000mm x 2000mm Granite Surface Plate Measuring Plate Granite Plate Granite Dimensions: 2000mm x 2000mm x 300mm (L x W x H) Height with supports: approx. 860mm Net weight: approx. 3500 kg Accuracy: DIN 876/1 Grade: 1 Flatness: actual deviation 0.0155; permissible deviation 0.030 Reference temperature: +20 °C You are welcome to arrange an inspection appointment. We are happy to organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. The prerequisite is a valid VAT identification number. Subject to prior sale. Visit our shop and take a look at our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Please note that deviations from technical data as well as errors in the item description may occur and are subject to change. Codey Iapuopfx Appsgu

Condition: used, Year of construction: 1999, pressure 200 t chamfer lenght 4100 mm Control CYBELEC DNC 900 stroke 260 mm weight of the machine ca. 16.000 kg Cedpfxsy H N Iwe Appsgu dimensions of the machine ca. 4500x2400x3000 mm

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, Industrial blow molding machine BATTENFELD FISCHER model VK1-1, year 1988, currently operational. Csdpfx Ajyn Ityjppjgu Single-station machine used for industrial packaging production via blow molding process. Functional equipment available for inspection at the plant in Albacete (Spain). Net price EXW Albacete. Negotiable.

Condition: used, Length ~ 77 lfm Depth 600 / 800 / 1200 mm Height ~2000 - 4000 mm Stands, quantity ~ 56 stk Lot of screwed cantilever racks Fischer and others. This is the complete factory equipment of a small planing mill. Cedpoy Ez Dnjfx Appsgu Free-standing and wall-mounted. One-sided and two-sided. Completely variable.

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, Industrial blower VOITH FISCHER model VK1-07, year 1979, currently operational. Csdpfx Asyn Iuweppjgu Compact machine suitable for the production of small containers using blow molding process. Equipment has been used in an industrial environment and is available for inspection at the plant in Albacete (Spain). Net price EXW Albacete. Negotiable.