Used Flaring Cup Wheel Grinding Machine for sale (91,055)

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € Nwjdpfoyv Iqvjx Ai Ten Dm. 200x78x78 mm 2800 1/min 300 mm 300x150x55 mm 350x150 mm 500x160 mm 3.6 kW 1020 mm 820 mm 2170 mm 440 kg This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: ready for operation (used), functionality: fully functional, Vertical cup grinding machine DELTA LF 350 -Largest grinding surface approx. 155x360mm -Standard magnetic plate / Eclipse 350x150mm Nwsdpezz Sxlsfx Ai Tjn -Max. distance table / disc approx. 280mm -Distance grinding spindle / column approx. 315mm -Spindle speed 2840 rpm -Cup grinding wheel dimensions 200x80x78mm -Drive power 3 kW -Coolant system -Machine enclosure -Grinding wheel guard -Documentation Dimensions: L x W x H 0.7 x 1 x 1.8 meters / Weight approx. 550 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 2001, DELTA LB 300 - Cup grinding machine Nwsdpfsz Dix Sjx Ai Ton - Grinding area max. 330x140mm - Speed range max. 2840 rpm - Max. distance table - grinding wheel 280mm - Distance grinding spindle / column approx. 300mm - Cup wheel dimensions 200x80x78mm - Drive power approx. 3 kW - Coolant system - Machine housing - Grinding wheel guard - Machine feet - Documentation Dimensions: L x W x H 0.7 x 1 x 1.8 meters / Weight 500 kg Errors and omissions excepted.

Condition: ready for operation (used), functionality: fully functional, total length: 1,300 mm, total height: 1,800 mm, total width: 800 mm, center height: 150 mm, overall weight: 700 kg, No minimum price – guaranteed sale to the highest bidder! Nwsdpfx Aiez Ilymo Tsn Submitting a bid obligates you to collect the item within the specified timeframe between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Maximum height: approx. 150 mm Spindle length: approx. 800 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,300 x 800 x 1,800 mm Weight: 700 kg External reference: Hercegfi - Lot 112

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, OMN RV-500 Includes cooling system, dressing unit, and magnet. Njdpfez R Rpnsx Ai Tjwn

Condition: good (used), Year of construction: 1993, with oil filtration unit Nsdezvfdkepfx Ai Tewn Unfortunately, we do not have any further technical data available. Transport and loading can be organised throughout Europe at an additional cost upon request. Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Machinery Purchasing / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, ETC. Do you need a high-quality yet affordable machine for your manufacturing shop? Or are you looking to sell your equipment? For further information or contact options, please use the contact form.

Condition: like new (used), Year of construction: 2023, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 91.0651.90.11D, total height: 2,000 mm, total length: 2,000 mm, total width: 2,000 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 800 rpm, type of input current: three-phase, grinding wheel diameter: 180 mm, overall weight: 1,000 kg, grinding spindle speed: 2,000 rpm, workpiece diameter (max.): 225 mm, We offer this Wendt OPRA 200V tool grinding machine in like-new condition, year of manufacture 2023. Manufacturer: Wendt Model: OPRA 200V Year of manufacture: 2023 Condition: as new Category ID: 1166 Type ID: 307 Nodpsyh Rklefx Ai Tswn Machine type: tool grinding machine If you have any questions or need more information, please feel free to send us a message or call us.

Condition: excellent (used), Cup grinding machine Swivel arm grinding machine Nwedpfx Asui S R Dei Tjn Make Lomefa Type Unicum 8" YEAR OF MANUFACTURE 1980 grinding wheel diameter 200 mm Motor 380 Volt 1,84 kw Separate coolant tank in the machine base Transport dimension: L.850 mm W.800 mm H.1650 mm Weight 350 kg

Condition: good (used), – Magnetic plate 250 x 150 mm – 380V Nwedpfxjy Abzzo Ai Tjn

Year of construction: 2007, condition: ready for operation (used), A CNC precision grinding machine Peter Wolters with two opposing grinding wheels and a workpiece/carrier disc system for simultaneous machining of both workpiece sides is available. Carrier wheel outer diameter: 1050mm, carrier wheel ring diameter: 290mm, max. workpiece height: 100mm, machine dimensions X/Y/Z: approx. 2350mm/3400mm/2400mm, weight: approx. 7000kg, control: Siemens Simatic S7-400 with WinCC visualization, operating hours: approx. 7000h. Including twin loader, buffer table, CBN fine grinding wheels, dressing wheels, ultra-fine measuring system, temperature monitoring, remote maintenance system, wear compensation and alignment system. Without filter system and cooling system. Documentation available. An on-site inspection is possible. Njdpfx Aiey R Drle Tswn

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Grinding wheel dressing machine for dressing grinding wheels up to a diameter of 450 mm Njdpfoy Anykex Ai Town Easy to operate, robust, and precise Our grinding wheel dressing machine offers an unbeatable combination of ease of use and exceptional stability. The solid granite base ensures maximum precision and durability, while the user-friendly operation maximizes efficiency in your production. While you continue production on your tool grinding machine, our dressing machine saves you time – and therefore reduces costs.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Paper cup machine Mold installed 6OZ-vending Max. speed 50 cup/min Production speed 40 cup/min New digital ultrasonic installed 2025 In fully working condition. Nodpfxez Rzb Ho Ai Town Price EXW=additional cost for packaging, loading and transport cost's,

Condition: new, functionality: fully functional, inner diameter: 160 mm, outer diameter: 275 mm, grinding wheel width: 160 mm, Reishauer grinding wheel blanks, new – unused – unprofiled – not profiled 6 pieces, EK item E04239 Manufacturer: Reishauer, Swiss Made Reishauer article no. 418041.36 Specification: A80 G8 V0167 80 m/s 1 piece, EK item E04514 Manufacturer: Reishauer Reishauer article no. 418041.38 Specification: A120 G8 V0176 80 m/s SITAB grinding wheel blank, new – unused – unprofiled – not profiled 7 pieces, EK item E01117 Manufacturer: SITAB Specification: 9A 120.1 J9 V101 PF 80 m/s Dimensions: each 275x160x160 mm (outer diameter/inner diameter/width) e.g. suitable for a Reishauer grinding machine RZ160 / RZ260 A.M.O. - Schnarrenberger Manufacturer: Winterthur Nedjz Ah Rajpfx Ai Tswn - 951100182, 42A350/400 M1OV 2730/MI N.5 0M/S, DAS 2908 - 350x8x160 - 2 pieces - ZUL. 2730 / MIN 980106691, 11 C220 / 240 K3V, Tested 50 M/S - 350x8x160 - 2 pieces - 951100183, T 1 ESP-, 53A60/80 G10V, MAX. 2730/MIN, 50 M/S, DAS 2670 - 350x20x160 - 1 piece - T3693001, 53A80 K5V, EN12413, T1ESP - 350x12x160, MAX. 2180 RPM, MAX. 40 M/S - 4 pieces - T0010901, EN12413, T1 - 350x12x160, 42A120 K10V, MAX. 2180 RPM, Max. 40 M/S - 1 piece - Approved 1910/min 35m/s 690705041, Form 1, 53A320 Q16Y, 350x6x160 - 2 pieces - T6101101, 42A80 J18VPLF300W, EN12413, T1, 42A80 J18VPLF300W, MAX. 2730 RPM, MAX. 50 M/S, 350x25x16 - 1 piece - 81A80 F15VPMF501W, EN12413, MAX. 2730 RPM, MAX. 50 M/S, 350x32x160 - 1 piece - B1265901, 53A120 H13VPMF 302W, T1, EN12413, MAX. 40M/S, MAX. 2550 RPM, 300x32x76.2 - 2 pieces - B1265902, 53A120 H13VPMF 302W, T1, EN12413, MAX. 40M/S, MAX. 2550 RPM - 4 pieces Manufacturer: Dorfner - 5A 220-L6-V1AX, V.MAX.25M/S, EN12413, 350x8x160 - 4 pieces - 2A 80-K10-V2AX, V.MAX.35M/S, EN12413, 150x16x32 - 11 pieces - 80A 80-JOT10-VK2EH, V.MAX.50M/S, EN12413, 120x60x32 - 4 pieces Manufacturer: Unknown - KS 2, 3-10513-4-201, DAS.NR.536, 350x30x160 - 1 piece - 0-03462/1-500, KS 2, 350x20x160 - 3 pieces Profiling for the engagement angle EW and module Ceramic grinding wheels, roll grinding for gear flank grinding Sintered corundum grinding wheels Price on request Subject to errors and omissions in all technical specifications. Sale exclusively to countries within the EU.

Year of construction: 1985, condition: refurbished (used), Pot grinding machine Manufacturer: GMN Model: MPS E-200 Year of manufacture: 1985 Machine No.: 9701 With warranty Accessories: Nedpfx Aijgayvqj Tewn - Grinding wheel Ø 200 with flange - Dressing diamond - Side dressing device - Magnetic clamping plate 250 x 150 mm (pole spacing: 2 mm) - Wet grinding device - Operating manual - Used, as is -

Condition: good (used), Year of construction: 1994, For sale OERLIKON MATTISON R.P. 5 Vertical Surface Grinding Machine with Magnetic Circular Table – Ø 1100 mm – 45 kW Description: For sale, a vertical surface grinding machine with a vertical spindle and rotary table, manufactured by OERLIKON MATTISON, model R.P. 5. This is a very powerful and robust machine, ideal for quickly grinding large series, as well as for grinding flat surfaces, discs, blades, large rings, or large mechanical parts. Technical specifications: Nsdpfx Aezpzynoi Tjwn Brand: OERLIKON MATTISON Model: R.P. 5 Diameter of the magnetic circular table: ~1,100 mm (measured with a meter) Spindle power / main motor power: 44 / 45 kW (60 HP) Motor speed: 750 rpm Motor: SELIN Genova (380 V / 50 Hz / 87 A) Included equipment: Large, recessed electromagnetic circular table Separate electrical cabinet (380 V) Paper filter system / coolant separator with belt conveyor Segment grinding wheel head Control panel on the front

Condition: new, Year of construction: 2023, functionality: fully functional, New DELTA surface grinding machine type LB300 Specifications: Max. grinding size: 330x140mm Max. spindle speed: 2840 rpm Parallelism: 3 µm/100 mm Flatness: 3 µm/100 mm Machine weight: 400 kg Motor power: 2.2 kW Year of manufacture: 09-2023 Machine equipped with: Magnetic chuck New grinding wheel Nwsdpfx Aisyi Ui Ds Ton Lubrication system

Condition: good (used), Year of construction: 2006, functionality: fully functional, 10 cup wheels vertical glass grinding machine min. glass size : 40 x 40 mm glass thikness : 2 - 30 mm speed : 0,35 - 5,4 m/min. machine dimensions : 7900 x 1200 x 2900 mm worki,g height from conveyor : 850 mm power : 30,5 Kw weight : 4100 kg Nwedszz Hirspfx Ai Ton

Condition: excellent (used), Year of construction: 2018, operating hours: 1,680 h, functionality: fully functional, total length: 7,003 mm, total width: 1,920 mm, total height: 2,300 mm, overall weight: 2,710 kg, input frequency: 50 Hz, input voltage: 400 V, 8 cup wheels vertical glass grinding machine total number of working meters : 45716 min. glass size height : 35 mm glass thikness : 3 - 40 mm speed : 0,5 - 5m/min Nwjdpfxjz N Dk Uj Ai Tjn work piece weight : 200 kg/m power : 20 Kw

Condition: ready for operation (used), functionality: fully functional, DESCRIPTION OF MACHINE Nwjdpfxjwxrnwo Ai Tjn INCLUDED A LOT BELTS A Löser abrasive belt grinding machine offers the most flexible grinding / linishing on the market today. The combination of basic machine plus a variety of contact arms and attachments offers dozens of possible applications for many different purposes. There are over 20 standard attachments available for this machine allowing it to be used for centerless grinding, internal polishing, grinding of hollow bodies and small radius and turbine blade finishing to name but a few. Fields of application of these abrasive belt grinding machines include: *Foundries *Medical engineering *Aircraft industry *Vehicle construction *Mechanical engineering *Specifications Abrasive belt grinding machine, type KS 350 *Grinding belt length 3000-4000 mm *Grinding belt width 5 - 75 mm Loser KS 350 Belt design features:: *Drive motor 4 kW (standard design) with fitted variable speed inverter drive *Drive wheels of 100 - 280 mm diameters = 3 - 46 mtr./sec. belt speed *Mechanical belt tensioning *In case of a belt break the drive is immediately disconnected. Therefore, the risk of an accident is eliminated. *Contact disks of 50 - 400 mm diameters, with a wide choice of grinding attachments for any kind of surface finishing * DC injection breaking unit fitted. *Maintenance-free, dust-proof contact disk bearing with permanent lubrication, contact disk change in less than 1 minute. *LÖSER abrasive belt grinding machines open up new fields of application for belt linishers that in the past could not be processed with normal belt grinders. *When using 3 to 4 m long grinding belts, the 3-contact wheel system ensures the constant and optimal belt speed no matter which contact disk diameter is being used. *Driven by the motor pully, the three pully system allows the belt which is constantly tensioned a higher degree of torque at the same motor rating. *When working with Scoth-Brite disks or belts or with felt polishing belts, the drive can be infinitely adjusted even for speeds as low as 3 mtr. /sec. Due to the advantages offered by the 3-contact point system, any required surface finishing is possible using contact disks from 50 to 400 mm, contact rolls or contact rollers from 15 to 50 mm, contact belts of 6 or 30 mm width, polishing brushes, polishing disks and polishing belts.

Condition: used, Year of construction: 1995, Technical details: grinding height: -- mm grinding width: 220 mm grinding wheel diameter: 762 mm total power requirement: 90 kW weight of the machine ca.: 13 t grinding spindle 1 drive:: 37 kW grinding spindle 2 drive:: 37 kW Grinding machine for pre-grinding the connecting rod With 2 replacement spindle motors Nwodpfewi Nh Nex Ai Ton *

Condition: used, Year of construction: 2000, grinding length: 240 mm, feed length X-axis: 50 mm, feed length Y-axis: 50 mm, feed length Z-axis: 240 mm, grinding width: 300 mm, WEINIG RONDAMAT 970 – Profile and Tool Grinding Machine – Year of Manufacture 2000 For sale is a WEINIG Rondamat 970, year of manufacture 2000, a high-quality automatic profile and tool grinding machine from Michael Weinig AG. The machine is suitable for manufacturing and re-sharpening profile and planing knives, as well as for grinding tools and knife heads. Profile tools can be manufactured manually using a template and then automatically re-sharpened. The machine is also suitable for re-sharpening planing knives in the knife head. Technical Data Nwedpfxez Evalo Ai Ten * Manufacturer: Michael Weinig AG * Type: Rondamat R 970 * Year of Manufacture: 2000 * Machine No.: 91176 * Tool Diameter: 100–300 mm * Max. Tool Width: 240 mm * Grinding Wheel Diameter: 150–225 mm * Grinding Wheel Bore: 60 mm * Grinding Wheel Width: 2 / 3 / 4 / 10 mm * Grinding Spindle Speed: 1,500–3,000 RPM * Grinding Spindle Drive: 1.1 kW * Total Connected Load: approx. 2 kW * Coolant Tank: approx. 50 liters * Operating Voltage: 380 V / 50 Hz * Back Angle: 10–30° * Lateral Clearance Angle (manual): 0–20° * Lateral Clearance Angle (automatic): 2.5 / 5 / 7.5 / 10° * Relief Angle for Planing Knives: 60° * Automatic Indexing: up to 16 knives * Precision: Grinding tolerance under 0.005 mm. Suitable for: * Profile knives * Planing knives

Condition: new, Delta LF 350 Cup Grinding Machine Condition: New Technical data: Nodpfx Ais Aax Aro Town Max. grinding area: 155 x 360 mm Distance between column and grinding wheel axis: 315 mm Max. distance between table surface and grinding wheel: 280 mm Rapid feed per revolution of the handwheel: 2 mm Micrometer feed via small handgrip: 0.01 mm Dimensions of the cup wheel: ø200 x 78 x 78 mm Dimensions of the grinding segments: 50 x 20 x 90 mm Motor power of the wheel: (4 HP) - 3 kW Speed of the wheel (50 Hz): 2840 rpm Motor power of the electric pump: (0.08 HP) - 0.06 kW Weight of the machine: 550 kg Equipment: Low-voltage system (24 V) Cooling system with electric pump Wheel mounting flange and grinding wheel Grinding wheel guard - Table guard - Keyway Operating manual CE declaration of conformity according to the provisions of Directive 2006/42/EC Two-color paint RAL 7037-7035, two-component multi-layer paint Costs for delivery by freight forwarder, free to the curbside, see shopping cart or for inquiry items in the individual offer.

Condition: used, Year of construction: 1980, machine/vehicle number: 46.60, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Workpiece Area Workpiece length: 310 mm Workpiece width: 150 mm Workpiece height: 210 mm Grinding Spindle Spindle speed: max. 2,800 rpm Distance between grinding wheel and table: 280 mm Spindle overhang: 250 mm Clamping System Nwede Aa Nd Tspfx Ai Tsn Magnetic clamping plate: 300 × 150 × 70 mm Type of magnetic clamping plate: Permanent magnet Machine Design Column diameter: 130 mm Performance Data Total power consumption: 1.9 kW Machine weight: approx. 0.58 t Dimensions Space requirement: approx. 0.62 × 0.72 × 1.80 m EQUIPMENT Permanent magnetic clamping plate

Condition: ready for operation (used), functionality: fully functional, Used NILES ZSTZ 10L gear grinding machine Includes accessories Available immediately Nwsdpfx Aiez H Rm Ae Ton

Condition: ready for operation (used), functionality: fully functional, DELTA LC 400 / Rotary table grinding machine -Max. grinding diameter 400mm Nwedsz Nkf Eepfx Ai Tsn -Magnetic chuck -Grinding height / distance between table and grinding wheel approx. 230mm -Spindle speed 2850 rpm -Fine feed 0.01mm -Distance between column and grinding wheel axis approx. 320mm -Spindle motor 3 KW -Grinding wheel dimensions 200x80x78mm -Machine enclosure -Coolant system -Documentation Dimensions: L x W x H 1.2 x 0.8 x 1.8 meters / Weight 700 kg Errors and omissions excepted.