Used Fortress Allat 450P for sale (22)

Condition: used, Year of construction: 1987, operating hours: 2,789 h, 1987 | Fortress Allat 450P | Used Asphalt Paver | 2789 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 5900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 55 inspection points 47 approved ✅ 5 imperfect ℹ️ 3 issues ⚠️ 📌 Inspector's Comment: The general condition of the machine corresponds to its age, with the presence of oxidation. The track pads are worn. The gas heating system could not be tested, some hoses will be needed for hot mix asphalt, but it works well when cold. Wear of various materials and multiple plays. Hour meter non-functional. Manufacturer's plate is missing. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39852 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform. Itodpfjx R E H Djx Abbsf

Year of construction: 2017, condition: used, functionality: fully functional, Ref: MM6310 1 x Fortress Technology Stealth / Driver Southall DS3000 combination metal detector checkweigher with pneumatic push-arm reject system into electronically lockable gravity roller bin. Fully retail / M&S compliant. This is a flexible system which can handle metallised film. It is suitable for range of products that want gentle handling, vegetables, bakery goods, ready meals, liquids, soups, bags of crisps, etc. Itedpfx Aex Ezhgsbbof Aperture dimensions - 450mm wide x 175mm high. Weighing platform - 500mm long x 350mm wide. Date of manufacture - 2017. Belt width - 350mm. Operating height - 1100mm (approx). Medium frequency - 150 kHz. Speed - recommended only up to 80 packs per minute. Overall dimensions - 3000mm L X 2200mm W X 1850mm H. Machine weight - 900 kg (approx). Electrical requirements - 240 V / 1 phase.

Year of construction: 2012, condition: excellent (used), functionality: fully functional, 1 x Fortress Technology Phantom metal detector / Driver Southall DS300 checkweigher combi unit with air-blast reject into lockable bins. Fitted with the following fail-safes - Reject confirmation, Bin-full monitoring and Low-air monitoring. Fortress Phantom serial number - EM1384. Driver Southall serial number - F4330. Date of manufacture - 2012. Metal detector aperture - 350mm W x 200mm H (133mm H useable). Weigh platform - 500mm L x 250mm W Loadcell - 5 kg (up to 3000g maximum weight). Ijdpfjynkpwjx Abbjtf Belt dimensions - 3250mm long x 245mm wide. Operating height - 890mm high. Medium frequency - 153 kHz. Overall dimensions - 3250mm long x 1100mm wide x 1930mm high. Electrical requirements - 230 V / 50-60 hz / 1 phase. Notes - can be fitted with spacing / metering conveyor which measures an additional 400mm long.

Condition: like new (used), Fortress Stealth metal detector with star flex checkwigher. Aperture 400 x 110mm. fully rebuilt. Twin push arm rejects into lockable bins. Video on request. very tidy machine. Itsdpfx Aex Syn Eobbsf

Condition: good (used), Fortress Phantom Metal Detector Fully stainless steel Aperture 500mm wide x 225mm high 1500mm long Belt Stop and alarm Itedpfx Abjxtfw Sobjf Video available on request

Condition: used, Year of construction: 2003, functionality: fully functional, total height: 4,000 mm, total length: 7,100 mm, total width: 8,100 mm, temperature: 80 °C, heating capacity: 116 kW (157.72 HP), Equipment: cabin, Complete wet paint installation with prep area, wet paint booth, mixing room, drying oven, and finishing zone. The installation can still be inspected in Diest. More details in the attachment or upon request. Isdpex H Rhrjfx Abbjtf - Dimensions: LxWxH = 8,100 x 7,100 x 4,000 mm (external) and 8,000 x 7,000 x 3,950 mm (internal). - Height to underside of rail = 3,740 mm measured from floor level. - With a shared sliding door with the spray booth. - Sliding doors as oven exit door: WxH = 1,200 x 3,800 mm, equipped with 1 window, 2 panels. - Emergency door with window in side wall: WxH = 800 x 1,900 mm, self-closing with door closer and latch. The emergency door is fitted with sealing rubbers, large in diameter and highly elastic EPDM quality. - Wall type: vertical double-walled sandwich panels filled with mineral wool, thickness 55 mm. Includes lighting, ventilation unit, control panel, and a complete monorail system in front of and throughout the installation up to the finishing zone.

Condition: new, Year of construction: 2022, functionality: fully functional, power: 2.6 kW (3.54 HP), overall weight: 35 kg, type of input current: three-phase, input voltage: 400 V, volume flow: 6,630 m³/h, fuel type: electric, ebm-papst: K3G450-PW12-07 centrifugal fan, radial fan, air supply fan, exhaust fan, high-pressure fan The impeller, motor and electronics are optimally matched to each other, resulting in an overall efficiency of well over 60%. The external rotor GreenTech EC motor contributes significantly to this efficiency. NEW!!! in stock: 3 pieces Manufacturer: ebm-papst Type: K3G450-PW12-07 Year of manufacture: 2022 Speed: 2040 min⁻¹ (revolutions per minute)​ Air flow q V: 6630 m³/h Air pressure: mac 948 Pascal Place of origin: Germany​ Electrical parameters Power supply: 3 phases, 380-480V AC, 50/60Hz​ Current consumption: 4.1A / 400V​ Power: 2650W / 400V​ Other characteristics Efficiency: 70% (A, static)​ IP protection: IP55​ VSD (variable speed drive) integrated​ Ins.CI.F, AO, Electronically protected​ Standards: CE, EAC, UKCA, cRUus Itjdpfxjxt I Nko Abbsf Dimensions Frame (height x width) 630 x 630 mm Impulse diameter: 450 mm Weight: 34.5 kg

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Isdoxdmgvspfx Abbotf Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: good (used), functionality: fully functional, MACHINE IS IN GOOD WORKING CONDITION Machine need NEW TAILSTOCK Iodpfovkycnsx Abbotf Machine Has ben used in Switzerland, Specifications Manufacturer CAZENEUVE Model HB575

Condition: excellent (used), Year of construction: 1974, functionality: fully functional, WE OFFER UNIVERSAL LATHE WITH BRAND NEW 3 AXIS DIGITALS COMPLETE TOOLS AND ACCESSORIESS. DESCRIPTION Description Precision lathe, turning machine -Manufacturer: VDF Heidenreich & Harbeck -Machine bed rails: hardened -Turning length: 750 mm -Turning Ø over bed: 500 -Turning Ø over recess: 355 mm -Turning Ø over support: 290 mm -Spindle bore: Ø 56 mm -Spindle speeds: 19 - 2000 rpm -Wedge bar chuck: Forkardt Ø 250 mm Itedpfx Asvkpkzjbbsf -Tailstock mount: MK4 -Drive: 7.5 kW -Accessories: 1x steady rest, 6x Multifix tool holder, -Dimensions: 1180/3050/H1345 mm -Weight: 2000 kg

Condition: ready for operation (used), functionality: fully functional, Ultrasonic Cleaner Paint Stripping Installation RAX-8 The solvent cleaning machine consists of 2 parts: 1) The ASD; a 4-tank ultrasonic cleaning and degreasing system 2) The distillation column (still); a closed boiling tank with a vapor zone above it, including condensation and cooling coils. The condensate is continuously returned to tank 1 via a water separation system, and the contaminated BEVO thinner from tank 3 is automatically pumped out. Tank contents: Tank 1: 40.5 liter immersion tank temperature: 76°C-79°C Tank 2: 75 liter immersion tank temperature: 22°C-30°C Tank 3: 40.5 liter immersion tank (vapor tank) temperature: 77°C-82°C Tank 4 empty (evaporation/cooling) temperature: ambient temperature Distillation column max 60 liters temperature: 76°C-82°C The machine has been professionally connected by a certified electrician. Itjdpfx Abew Ewl Usbsf

Condition: good (used), Year of construction: 2012, functionality: fully functional, Schiess CNC vertical lathe with C axis, year 1992, retrofitted in 2012 CNC: NUM 1060 FLEXIUM 2 tables, table diameter 2000mm – max turning diameter 2500mm – max table speed 201 rpm – table power 56 KW Load capacity (table included): 16,000kg Movable crossrail with 12 positions, 50mm pitch Available space under spindle nose: min. 795mm, max. 1345mm RAM Z stroke: 1000mm C axis with 360,000 positions – milling spindle max speed 1600 rpm – milling spindle power 22KW – 2 gear ranges Iedpfexpqm Rsx Abbjtf Tool magazine: 20 turning tool positions, 35 milling tool positions 1 milling head WIDAFLEX UTS80 1 milling head ISO 50 Renishaw MP60 touch probe (for parts) Tool presetter – Transmit function: G20 / G21 – No rigid tapping Chip conveyor Front door: partial opening M0 / full opening

Condition: excellent (used), Type: UF 450plus Air circulation: forced convection Temperature Temperature range: +20 °C to +300 °C Working range: at least +10 °C above ambient temperature Setting accuracy: up to 99.9 °C: 0.1 °C from 100 °C: 0.5 °C Temperature sensors: 2× Pt100 (DIN Class A, 4-wire) Interior and Capacity Volume: 449 liters Internal dimensions (W × H × D): 1040 × 720 × 600 mm Maximum number of shelves: 8 Load per shelf: 30 kg Maximum total load: 300 kg Interior: Stainless steel, all-around heating External dimensions and Weight External dimensions (W × H × D): approx. 1224 × 1247 × 784 mm Net weight: approx. 160 kg Gross weight: approx. 185 kg Electrical Data Voltage: 400 V, 3-phase Power: approx. 5800 W Control and Regulation Controller: ControlCOCKPIT TwinDISPLAY Regulator: digital PID microprocessor Timer: 1 minute to 99 days Functions: SetpointWAIT, HeatBALANCE, calibration at 3 temperature points Adjustable parameters: temperature, fan speed, exhaust flap, time programs Ventilation Recirculating air: adjustable in 10% increments Fresh air: electronically adjustable Exhaust air: with throttle valve Communication Interfaces: Ethernet, USB Software: AtmoCONTROL Safety Ijdpfxoyzzm Ij Abbstf Temperature limiter (TB), protection class 1 Temperature monitor/limiter (TWW/TWB) selectable ASF system for over- and under-temperature monitoring Equipment Stainless steel door with 2-point locking Stainless steel housing Low-noise air turbine Rear side with 2 feed-throughs approx. 12 cm diameter each Condition: used Scope of delivery: (see picture) (Subject to change and errors in the technical data, information is non-binding!) If you have any further questions, we are happy to assist you by phone. For detailed technical data and processing instructions, we strongly recommend consulting the original datasheets or obtaining information directly from the manufacturer.

Condition: good (used), Year of construction: 2021, cooling capacity: 25 kW (33.99 HP), In good condition, CO2 installation & cold room built in 2021. Cold room temperature of +-4°C and an evaporating temperature of -8°C. The installation includes the following: One cold room storage with a panel thickness of 100 mm and an isolation value of RC 5,21. Further, the cold room has an electrical slide door and 3 Bachara MGS 450/CO2 gas detectors. One for on the machine set and two for in the cold room. Cold room temperature is +-4°C. Dimensions internal: 24.800x7.800x2.900 mm (LxWxH) Dimensions external: 25.000x8.000x3.100 mm (LxWxH) Dimensions slide door: 2500x2500 mm (WxH) Cold room surface: 194 m² Cold room volume: 600 m³ Advansor MiniBooster 2x1 unit complete with a Bitzer 2HSL-3K-40S & Bitzer 4KTE-10K-40S (x2) semi-hermetic reciprocating compressors, Klimal RCO 273.108.53.80+WT 17.19 liquid collector, 2 Danfoss VLT drives and a Danfoss MMI control display. Dimensions: 1000x800x2200 mm (LxWxH) & weight: 820 kg. Delta FMT-7028 (x4) evaporators with a capacity of 6,3 kW. Each evaporator has 2 fans that have a diameter of 350 mm and an airflow of 3.000 m³/h. Dimensions: 1370x470x465 mm (LxWxH). Itoderz R Aropfx Abbef Eco KCE62M6V.4314 gas cooler with 2 EBM-Papst A3G630-AR85-90 fans - 50/60 Hz - 0,97 kW - 1140 RPM - diameter 630 mm. The gas cooler has a capacity of 50 kW. Weight: 250 kg. Please feel free to contact us for more information and additional pictures!

Condition: like new (used), Year of construction: 2003, operating hours: 6,762 h, functionality: fully functional, type of input current: three-phase, Equipment: compressor, documentation/manual, Saddle stitcher Müller Martini 8 station+Stacker Apollo 1540 -Year 2003/2005 USED, AS NEW CONDITIONS! - WITH ONLY 6762 WORKING HOURS Iodoyylnmopfx Abbotf Complete of instruction and electric manuals in english.

Condition: ready for operation (used), functionality: fully functional, turning diameter: 1,700 mm, center height: 630 mm, center width: 4,000 mm, spindle speed (max.): 400 rpm, empty load weight: 4,000 kg, TECHNICAL DETAILS Centre height: 630 mm Swing diameter over bed: 1,300 mm Swing diameter over carriage: 1,000 mm Swing diameter over removable bed section: 1,700 mm Centre distance: 4,000 mm Bed width: 700 mm Spindle bore: 120 mm Spindle speed: 2.8 - 400 rpm MACHINE DETAILS Itjdpsyua Ivjfx Abbjf Control: Conventional Dimensions & Weight Dimensions (L x W x H): 6,800 x 2,200 x 2,000 mm Unladen weight: 11,000 kg Transport packages: 2 EQUIPMENT Documentation Three-jaw chuck Four-jaw chuck Removable bed section Quick-change tool holder Fixed steady rest Travelling steady rest

Condition: excellent (used), mileage: 97,026 km, power: 331 kW (450.03 HP), first registration: 01/2023, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: yellow, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, Year of construction: 2023, Technical Information Number of cylinders: 6 Engine displacement: 10,800 cc Transmission Transmission: ZF TraXon, 12-speed, automatic Axle configuration Brakes: disc brakes Suspension: air suspension Front axle: Tyre size: 385/55R22.5; Max. axle load: 8,000 kg; Tyre tread left: 90%; Tyre tread right: 90% Iodpfx Absytcuvobjtf Rear axle: Tyre size: 315/70R22.5; Max. axle load: 13,000 kg; Tyre tread left: 90%; Tyre tread right: 90% Condition Technical condition: very good Optical condition: very good Damages: none Warranty Warranty: Geen

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 0500071, SPECIFICATION Table Size 600 x 320mm X axis traverse 450mm Y axis traverse 350mm Z axis traverse 380mm Spindle BT40 Isdpfx Abstylazjbstf Spindle Speeds 0-8000rpm Spindle Motor 10kW Rapid feed rates all axes 30m/min Toolchanger capacity 12 Tools Toolchanger change time 8 Seconds Approximate Weight 2000Kg   Machine equipped with:- Siemens 810D Shopmill CNC Control 4th axis unit Swarf auger Lighting Coolant system Enclosed guarding

Condition: good (used), mileage: 192,017 km, power: 120 kW (163.15 HP), first registration: 04/2012, fuel type: diesel, tire size: 195.75.16C, axle configuration: 4x2, wheelbase: 4,320 mm, fuel: diesel, fuel tank capacity: 80 l, color: green, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro5, suspension: other, number of seats: 2, total length: 7,100 mm, total width: 1,990 mm, Year of construction: 2012, Equipment: ABS, USB port, air conditioning, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, onboard computer, power assisted steering, power mirror, sliding door, soot filter, traction control, trailer coupling, = Further Options and Equipment = - 100% dealer serviced - Alarm system - Armrest - Exterior mirrors with indicator light - AUX port - Outside temperature display - Cup holder - DAB radio - Tachometer - Third brake light - Driver airbag - Height-adjustable driver’s seat - Remote central locking - Enclosed cab - Tinted glass - Rear doors - Height-adjustable steering wheel - Folding exterior mirrors - Particulate filter - Radio/CD player Itodpfx Aboxfwpqjbsf - Beacon light - Reversing camera - Disc brakes - Headlight height adjustment - Immobilizer - Tachograph - Partition wall = Remarks = Very well-maintained Mercedes Sprinter 516 CDI from 04/2012. Originally Dutch, delivered with 192,017 km, from the first owner, equipped with Rico sewer and pipe technology installation. The Sprinter is dealer maintained, comes with 3 remote controls, stationary air conditioning, heating, cruise control, tow bar, and radio. For further information or photos of this vehicle, you can contact us at or , also via WhatsApp! Check our full inventory at . = Further Information = General Information Number of doors: 5 Cab: single Technical Information Number of cylinders: 4 Engine displacement: 2,148 cc Axle Configuration Tyre size: 195/75/16C Axle brand: Michelin CrossClimate Brakes: Disc brakes Front axle: Max. axle load: 1,850 kg; Steered; Left tire tread: 70%; Right tire tread: 70%; Suspension: Coil spring Rear axle: Twin tyres; Max. axle load: 3,500 kg; Left inner tire tread: 70%; Left outer tire tread: 70%; Right inner tire tread: 70%; Right outer tire tread: 70%; Suspension: Leaf spring Weights Curb weight: 4,020 kg Payload: 980 kg Gross vehicle weight: 5,000 kg Max. towing capacity: 3,000 kg (unbraked 750 kg) Condition Technical condition: good Optical condition: good Damages: none Financial Information VAT/margin: VAT deductible = Company Information = Nidro Cars Holland is located in the centre of the country and is the right address for the purchase of your car, van or truck. The indicated price is the 'internet take-away price.' For questions or a test drive, please contact us: LOOK FOR OUR ENTIRE STOCK AT All types of trade possible with us! (Our advertisements are compiled with great care, but no rights can be derived from the content.)

Condition: new, Year of construction: 2026, functionality: fully functional, color: other, Equipment: cabin, hydraulics, CONSTMACH JS-1 mobile jaw and impact crusher is a high-efficiency mobile crushing and screening plant designed for processing natural stones such as medium-hard limestone, dolomite, and river stone. The JS-1 is manufactured with advanced engineering expertise and offers maximum efficiency even in challenging site conditions thanks to its durable components, high-performance crushers, and compact design. The system's first chassis features a CJC-60 primary jaw crusher, a vibrating feed hopper, a bypass belt, and a wheeled mobile chassis with hydraulic legs. The second chassis houses a CSI 1210 secondary impact crusher, a three-deck vibrating screen, a return belt, foldable stockpile belts, and a dust suppression system. Thanks to the powerful impact crusher design of the JS-1, the final products have an excellent cubic shape, providing ideal aggregate quality, especially for concrete production. The plant's production capacity varies between 60 and 80 tons per hour, depending on the hardness of the rock. Thanks to its user-friendly automation system, SIEMENS – SCHNEIDER brand components, and PLC control, the plant can be fully automatically managed via a tablet. Installation is completed in a short time, and the need for external equipment is minimized thanks to hydraulic opening mechanisms. The JS-1 can be easily transported with a single tractor due to its dimensions suitable for international road transport. JS-1 - Mobile Jaw and Impact Crusher Technical Specifications Production Capacity: 60-80 tph Maximum Feed Size: 600 x 380 mm Feed Height: 4.5 meters Main Configuration: Jaw Crusher + Secondary Impact Crusher + Vibrating Screen Total Motor Power: 275 kW Electric Generator Requirement: 550 kVA Plant Weight: 60 tons (total of two chassis) Plant Dimensions: 1st chassis 11x3x4.4 m / 2nd chassis 3.35x4.3x17.8 m Chassis Type: Double Chassis Why Choose the JS-1 Mobile Crushing and Screening Plant? Iedpfx Ajxqg Eljbbotf CONSTMACH JS-1 is an excellent choice for professionals seeking maximum efficiency, minimum operating costs, and superior product quality in the rock crushing process. Its fully automatic control system, high mobility capability, and durable construction offer uninterrupted production for many years. Furthermore, CONSTMACH's engineering expertise, after-sales technical support, and spare parts supply guarantee ensure the continuity of your business. If you are looking for quality, performance, and reliability in stone crushing solutions, experience the difference with the JS-1 Mobile Jaw and Impact Crusher, backed by CONSTMACH quality. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: ready for operation (used), ABB Robotics 2 x PS 60/4-50-P-LSS-3985 servo motor combination SN: 910.8090020-063 / 910.8090020-029, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please ask for price separately! Itedpfoi D Eycjx Abbsf

Year of construction: 2018, condition: excellent (used), Sanco Dosing Installation, Year of Manufacture: 2018 Consisting of: - 2x insulated 1200-liter tanks with manhole and agitator Itodewf Izajpfx Abbsf - Accompanying platform - 2x PROMASS A flow meters with control cabinets - LKH-5 centrifugal pump - Grundfos pump - Plate heat exchanger - Associated piping The installation was previously used for dosing lecithin, but is also suitable for other products. The unit has been dismantled in working condition and is currently stored in our warehouse. We are happy to assist you further upon serious interest in this installation.