Used Fryma Koruma Colloidal Mill for sale (9,732)

Condition: used, Manufacturer: Fryma KorumaModel: MZ130RType: Colloidal millPower: approx. 15 kWApproximate capacity (manufacturer’s specification): 700–7000 l/hProduct particle size: 100–500 µm Hfjdpfey Iqi Esx Ab Njg

Year of construction: 2013, condition: used, Manufacturer: Fryma KorumaModel: MZ190Year: 2013Type: Colloidal millPower: 45 kWApproximate capacity (manufacturer’s specification): 2,600–26,000 l/hProduct particle size: 100–500 µmTechnical drawings available Hfodpfx Aboy H Rfkj Njg

Condition: good (used), Koruma DISHO-100/45 homogenizer. Capacity: 45 L Homogenizer: Ø100 mm – 0-5000 rpm Motor: 5.5 kW Jacket pressure: 6 bar Max temperature: 180 °C Material: Stainless steel Anchor agitator with scraper Hodpeyt Izhsfx Ab Nefg Vacuum capable Total dimensions - L:160cm x W:105cm x H:160cm.

Condition: used, Year of construction: 2009, Manufacturer: Romaco - Frymakoruma Model: Dinex Lab Year: 2009 Type: Vacuum mixer for R&D or small-scale production Application: liquid and/or viscous (semi-liquid) products = dispersion, homogenization, emulsion, grinding, and pumping of the product Tank: Pressure: -1 / 0 bar Volume: 18 L Temperature: 130°C Jacket: Pressure: 6 bar Volume: 2 L Temperature: 180°C Hjdpfx Asx R D Elob Nefg Homogenizer: high-speed agitation 2 modes = Pumping with discharge / Dispersion with high shear force Tool size: 100 mm Rotor: 20 x 4 mm Stator: 30 x 4 mm VEM motor 7.5 kW / 2890 RPM Scraper mixer: slow agitation SEW 0.37 KW motor Sterling SIHI LEMA 25 liquid ring vacuum pump Power 1.1 KW - Max. 16 m³/h. CIP (clean in place) 2 x feed hoppers, 1 of which is connected to the jacket with its piping Air pressure: 6 bar Water pressure: 6 bar Temperature control regulator Single-acting seal: reconditioned by Burgmann Paper documentation Weight: 750 kg

Year of construction: 2025, condition: new, Creaming, pasting, nut butter making machine (Stone cream/paste machine) The produced cream or butter has a particle size so fine that it flows from the machine like oil; no coarse particles are detectable. The machine was awarded a gold medal at the International Agricultural Fair of Serbia. Machine's function: Cream production, pumpkin seed grinding, coconut grinding. Possible cream/paste production from the following products: Oilseeds: - Peanut, hazelnut, almond, walnut, cashew nut. Hfodpfx Asxvrxzjb Nog - Pistachio, sunflower seed, pumpkin seed, hemp seed, coconut. - Soy milk (tofu), chickpea (hummus). Addition of water is required for soy milk and chickpea processing! Thermal treatment of oilseeds is required before processing. Fruit and vegetable cream processing: apricot, plum, bell pepper cream, garlic cream. Motor: 3 kW / 380 V Capacity: 20-60 kg/h Cream fineness, particle size: from 50 up to 150 microns.

Year of construction: 2023, condition: new, functionality: fully functional, You can see this machine until 22.03 at the Anuga Tec Cologne Hall 8 Stand B 079 at PVS Crushing and emulsifying machine for various products such as meat / sauces / soups Hfjdpfxeivikxs Ab Nsg pesto / ketchup / mayonnaise Reework applications (baked goods and others) Nut pastes . Pharmaceutical applications . ( in the production of heparin )

Condition: used, functionality: fully functional, Brogtec METEOR homogenizer High performance colloid mill ATEX Hjdpfx Ajr Hquhjb Nofg Colloid mill in pharmaceutical design, mobile on a stainless steel trolley. Electric cabinet on the trolley with speed control via frequency converter, on/off switch. Version with mechanical seal and sealing pressure vessel for pressure maintenance and cooling of the sealing medium in the sealing circuit of the mechanical seal. VAC/48-62 Hz, 400 V Brogtec METEOR High performance colloid mill - homogenizer ATEX Colloid mill in pharmaceutical design mobile on a stainless steel trolley. Electrical cabinet on the trolley with speed control via frequency converter, on-off switch. Design with mechanical seal and barrier pressure vessel for pressure maintenance and cooling of the barrier medium in the sealing circuit of the mechanical seal. VAC/48-62 Hz, 400 V

Condition: good (used), Colloid mill is operational and in good condition Hsdpfx Abew Nbqzj Nefg

Condition: used, Year of construction: 2010, Supper mini mill specs X 406mm Y 305mm Z 254mm . Max speed 10000 RPM . Power 15 HP (11.2 KW) . Taper CAT 40 / BT40 Hsdpfsy D A S Dex Ab Nsfg

Condition: repair required (used), Year of construction: 2019, functionality: fully functional, In operational condition: MAXMILL NVM1166 - HISION VMU1100 - HISION V180 Hfjdpfx Ajy Iyw Sjb Nsg

Condition: used, Used Fryma stand agitator with tempering unit Item number: 10897 Type: stationary Overall height: 1930 mm Overall width: 1320 mm Overall length: 1650 mm Leg height: 100 mm Motor: Power: 11-15 kW Speed: 2910 - 3490 rpm Voltage: 50 - 60 Hz Agitator: Hfodpfx Aeyzp Hvjb Nsg Dissolver Diameter: 100 mm Shaft length: 260 mm Tank: Volume: 46 L Material (media-contact): 1.4301 stainless steel Inner diameter: 400 mm Outer diameter: 450 mm Cylindrical height: 365 mm Outlet diameter: 22 mm Distance outlet to floor: 450 mm Tempering unit Make: Tool-Temp Overall height: 920 mm Overall length: 720 mm Overall width: 300 mm

Condition: good (used), Year of construction: 2013, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 530 mm, spindle speed (max.): 8,000 rpm, table width: 406 mm, table length: 1,372 mm, rotational speed (max.): 8,000 rpm, overall weight: 3,100 kg, space requirement width: 2,280 mm, space requirement length: 2,900 mm, space requirement height: 2,550 mm, Equipment: documentation/manual, rotational speed infinitely variable, X-axis: 1.000 mm Y-axis: 500 mm Z-axis: 530 mm Table size: 406 x 1.372 mm Spindle nose: BT 40 Hjdpfxsvpl I To Ab Nefg Spindle speeds: 1 - 8.000 rpm Controller: Fagor Featured with: - Cooling unit - User Manuals Country of origin: Taiwan Motor power: 10 HP Machine LxWxH: 2.900 x 2.280 x 2.550 mm Machine weight: 3.100 kg

Condition: used, functionality: fully functional, machine/vehicle number: D20E/7694, Offer Number: D20E/7694 Machinetype: multiple wire drawing machine - dry Make: SKET / MILL Type: 8 BLOCK Hsdpfjwi S Ixjx Ab Nsfg Constr. year: inlet wire diameter: 6,5 mm finished wire diamter: 1,6 mm number of drafts: 8 diameter of capstan: 550 mm and 650 mm speed -meters/sek: 8-12 Location: Europe

Condition: used, Used Fryma Koruma model VME-120/C stainless steel vacuum process vessel. - Manufacturer: Fryma Koruma - Model: VME-120/C Vessel: - Capacity of vessel: 25 - 120 litre - Vessel rated: -1 bar at 150°C - Capacity of jacket: 25 litre - Jacket rated: 3 bar at 150°C Mixers: - scraping-mixing system: speed 17/34 rpm driven by 2.0/2.4 kW motor - homogenizer system with diameter 230 mm: speed 300 - 1450 rpm, driven by 15 kW motor Includes: - vacuum pump - control panel - hydraulic agregate for lifting mixing units Specifications: Hsdpfxeykpdfo Ab Nofg Power: 19 kW Vacuum (Y/N): Y Capacity: 120 Jacket (Y/N): Y

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 26956, Specification Table size 914mm x 305mm X axis traverse 406mm Y axis traverse 305mm Z axis traverse 254mm Spindle BT 40 Spindle speeds 0-6000rpm Spindle motor 5.6kW Rapid feed rate 15.2m/min Hfedpfxowkrq As Ab Nsg Toolchanger capacity 10 tools Approximate weight 1542kg   Machine equipped with:- Haas CNC Control System Coolant system Lighting Enclosed guarding Manual

Condition: new, Year of construction: 2023, Hammer Mill with electrical box and cyclone filter for sale. The machines has a CE certificate. Technical parameters: Electric motor power: 45Kw Capacity: 1500-2000kg/hour Hfedoxf Nw Hepfx Ab Nsg Machine size: 1750mmx900mmx1550mm. Weight 1300kg. Located Locally in Hungary (EU)

Condition: like new (used), 1 unused universal vertical milling head suitable for an ORADEA / EURO-MILL FUS 32 Design: “MAHO”, ISO 40 taper, quill stroke 100 mm, rated drive power approx. 3-4 kW, max. speed 2000 rpm, … Special accessories: - Multiplicator, gear ratio 1:4, ISO 40 taper Price: 499.00 EUR - Attachment for automatic feed device for vertical milling head quill, “MAHO” system, 6 feeds 0.02 - 0.2 mm/rev Price: 1,880.00 EUR - Horizontal milling head, auxiliary head for vertical milling head with ISO 30 spindle taper, swivels 360 degrees Price: 585.00 EUR Plus statutory VAT. Hjdeddtwbjpfx Ab Njfg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Universal Tool Milling Machine ORADEA EURO-MILL STIMIN (Romania) Model FUS 32 Serial No. 5591 Year of construction: 2009 Travel: X: 560 mm, Y: 320 mm, Z: 400 mm Table size: 950 x 450 mm Tool holder (vertical head): ISO 40 - M16 Tool holder (horizontal spindle): ISO 40 - S20x2 (Deckel-compatible) Spindle speed: 25-2000 rpm, 18 steps Hfjdpox Hkd Hefx Ab Nog Feed rate: 5-400 mm/min, 18 steps Rapid traverse: 1400 mm/min Main spindle motor power: 3 KW Electrical connection: 400 Volt, 50 Hz, 10 KW - 3-axis digital readout and linear glass scales by HEIDENHAIN, type ND 780 - Vertical milling head with quill, swivels +/- 90° - Quill travel at vertical head: 100 mm - Manual tool clamping with M16 thread - Counter bearing for horizontal milling with Ø 48 mm bearing bush - Central lubrication - Electrical control cabinet mounted on machine side - Coolant system integrated in machine base - Machine lamp - Including 2 tool holders - Operating manual with electrical diagram Required space (L x W x H): 1800 x 1600 x 1800 mm Weight: 1650 kg Very good condition

Condition: good (used), Single Head Capstan Block Wire Drawing Machine Hfedet Ixkzspfx Ab Neg Maximum Inlet Wire's Diameter: 30 mm

Year of construction: 1994, condition: ready for operation (used), Working pressure working chamber/ double jacket: 2.5/2bar, with documentation and accessories, on-site inspection is possible, videos not available. Hfedpfx Asrp E Nceb Nog

Year of construction: 1990, condition: used, Manufacturer : Fryma Model: MSM-18 Year: 1990   Type : Ball mill type Co-Ball Application: fine grinding of suspensions and highly viscous products. Grinding chamber volume: 1.1 litres Internal overpressure: 2.5 bars Jacketed: 2 bars Motor power: 5.5 kW   Capacity: 20 – 80 l/h depending on product.   Examples: Hfodpfxsx R Dd Is Ab Nsg food: chocolate coatings / fillings cosmetics: lipsticks, pigment pastes pharmaceutiques : additifs chimiques : laquage pour les pigments, les peintures et les céramiques.  

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head -Diameter: Ø 100 mm -Number of teeth: 6 -Indexable inserts: Carbide -Recording: SK50 -Weight: 4.5 kg Hfjdpfob A Ihdjx Ab Neg

Condition: new, functionality: fully functional, power: 55 kW (74.78 HP), Year of construction: 2026, Ball Mill for Powder and Mining Plant: Structure, Function, and Technical Details A ball mill is a key grinding machine widely used in mining, metallurgy, cement, chemical, and powder-making industries. It is designed to grind various ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, preparing materials for flotation, magnetic separation, or leaching processes. In powder production, they ensure uniform particle size and high surface area for further processing. Working Principle The ball mill operates on a simple yet effective principle: as the cylindrical shell rotates around its horizontal axis, the grinding media (steel or ceramic balls) are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion causes both impact and abrasion, reducing the material to the desired fineness. The grinding process can be performed in dry or wet conditions depending on the application. Structural Composition Hfjdpfx Absq Nf U Es Njg A standard ball mill consists of several main components: Feeding part: Equipped with a feeder or screw conveyor to ensure uniform material input. Discharging part: Can be grate type or overflow type, depending on the discharge method. Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel balls or ceramic balls of different diameters for efficient grinding. The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Technical Details Typical Specifications: Feeding size: ≤25 mm Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Cylinder speed: 18–38 r/min Power: 18.5–4500 kW Liner material: High manganese steel, rubber, or alloy steel Grinding media load: 30–45% of cylinder volume Operating Modes: Dry grinding: Suitable for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Application in Mining Plants In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. Common Applications: Gold, copper, iron, and zinc ore grinding Cement clinker and slag processing Silicate and ceramic powder production Coal and mineral powder preparation Conclusion A ball mill is an indispensable piece of equipment in both powder production and mining beneficiation plants. Its ability to grind materials into fine, uniform particles makes it vital for downstream processes such as flotation, sintering, and chemical reactions.

Condition: new, functionality: fully functional, Year of construction: 2026, Dry and Wet Ball Mill: Structure, Operation, and Technical Details A ball mill is a fundamental grinding device used in mineral processing, cement manufacturing, chemical production, and other industrial applications. It works by rotating a cylindrical shell filled with grinding media—usually steel balls—causing impact and friction that reduce materials to fine powder. Based on the grinding environment, ball mills are classified into dry and wet types, each suited for specific materials and process requirements. Working Principle Both dry and wet ball mills operate on the same mechanical principle. The rotating cylinder, driven by a motor through a gear system, lifts the grinding media and material along the inner wall. As the rotation continues, the balls fall under gravity, striking and grinding the material. The difference lies in the presence or absence of a liquid medium during grinding. Dry Ball Mill A dry ball mill is used when the material must remain moisture-free or when water could affect product quality. It is commonly applied in cement clinker, limestone, quartz, and refractory material grinding. The discharge can be either grate type or overflow type, depending on the desired fineness. Technical Features: Feeding size: ≤25 mm Discharge size: 0.075–0.4 mm Capacity: 0.65–90 t/h Liner material: High manganese steel or wear-resistant alloy Drive system: Gear-driven or direct-coupled motor Dust control: Equipped with air exhaust and dust collector Advantages: Suitable for materials sensitive to moisture No drying process required after grinding Lower corrosion risk and simpler maintenance Easier material classification and separation Limitations: Dry grinding produces more dust and heat, requiring efficient ventilation and dust collection systems. Wet Ball Mill A wet ball mill operates with water or another liquid medium added to the material. The slurry formed during grinding improves efficiency by reducing friction and preventing excessive heat buildup. It is widely used in ore beneficiation, ceramics, and chemical industries. Technical Features: Feeding size: ≤25 mm Discharge size: 0.074–0.2 mm Hsdpfeq Nx Aljx Ab Njfg Capacity: 0.65–615 t/h Liner material: Rubber or high-chromium steel Discharge method: Overflow or grate type Auxiliary equipment: Classifier, pump, and thickener for slurry circulation Advantages: Higher grinding efficiency and finer particle size Reduced dust and noise levels Continuous operation suitable for beneficiation circuits Better control of particle uniformity Limitations: Requires drying if the final product must be in powder form and involves more complex slurry handling. The selection between dry and wet grinding depends on the material characteristics, downstream process, and environmental conditions. Dry mills are preferred for materials that must stay moisture-free, while wet mills are ideal for fine grinding and slurry-based processes. Conclusion Dry and wet ball mills share the same mechanical structure but differ in their grinding environment and application scope. The dry type offers simplicity and low maintenance for moisture-sensitive materials, while the wet type provides higher efficiency and finer output for mineral and chemical processing. Understanding their technical parameters and operational differences ensures optimal equipment selection, improved productivity, and reliable performance in industrial grinding operations.

Condition: excellent (used), Year of construction: 2001, AN VERY RARE OPORTUNETEY TO BUY AN EXCELLENT MACHINE WITH HUGE AMOUT OF TOOLINGS, DRAWERS, CLAMPING EQUIPMENT... CNC BORING MILL WOTAN RAPID 1 RETRIFITTED 2001 WITH HUGE AMOUNT OF OVER 450 TOOLING VERY LOW HOURS WORKING TIME DATA: CONTROL ON: 8001 H MACHINE POWER ON: 13692H PROGRAM RUN: 4650 H SPINDLE S1 TIME: 4690 H AXIS TIME: 4568H HYDRAULIC ON TIME: 12702 H WE OFFER AN STUNNING EXCELLENT CONDITION WOTAN CNC RAPID 1 WITH HUGE AMOUNT OF TOOLINGS, FOR A SPECIAL STAINLESS WORK. MACHINE HAVE HEIDENHAIN 530 CONTROLS TECHNICAL DETAILS: Hfjdsvkkf Hjpfx Ab Neg SPINDLE SPEED : 6,3-1600 U/Min SPINDLE MOVE : Y AXIS : 1250 mm DRILLING SPINDLE MOVE: Z AXIS: 600 mm W : 1000 mm X : 2000 mm B: 360.000 DEGREE SPINDLE DIAMETER: 105mm TOOL HOLDER: ISO 50 WITHOUT TOOL CHANGER CLAMPING: HIDRAULIC MAX TABLE LOAD: 6000 KG TABLE: 1120 X 1400 NUT -BILD 7 ; 22H7 INDEXING 4 X 90 DEGREE TOTAL WEIGHT: 16000 KG DIMENSION OF MACHINE: LENGHT 4800 X BREIT 4665 X HEIGHT 4200