Used Fs-Solutions Fs-240-Mts-030.Inox for sale (13,105)

Condition: good (used), Year of construction: 2016, FS solutions conveyor 40 x 23 cm380 Volt More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Podpez Rb N Dsfx Ai Tegu Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: good (used), Year of construction: 2016, FS solutions conveyor 40 x 23 cm380 Volt Pedpfx Asz Rb N Rsi Tsgu More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Year of construction: 2011, condition: good (used), Fixed speed 380 Volt More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Pgjdpfjz Rdvtex Ai Tou Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: good (used), Year of construction: 2011, Aluminium frame380 VoltFixed speed235 x 60 cm Psdpfsz Rdvasx Ai Tjgu More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: good (used), Year of construction: 2016, Conveyor runs from high to low95 cm before the bend 210 cm after the bend 135 cm diagonally downward 250 cm flat 380 Volt Fixed speedAluminium frame Pgodpfx Ajz Rdvgei Tou More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: good (used), 465 cm diagonally downward 260 cm before the bend130 cm after the bend Width belt 19 cm 380 Volt Fixed speedAluminium frame More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Podpfjz Rd A Hjx Ai Tjgu Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: ready for operation (used), Year of construction: 2025, operating hours: 1,351 h, controller manufacturer: FANUC, controller model: i Series iPlus, This 6-axis DN Solutions DNX 2100S Advanced was manufactured in 2025. It features a FANUC i-Series control, a 6-axis configuration including B and C axes, and a tool magazine with 60 positions. The machine offers full turn-mill capabilities, through-spindle coolant up to 70 bar, and a Renishaw probing system. Consider the opportunity to buy this DN Solutions DNX 2100S turn-mill centre. Contact us for more information about this machine. • Axes Configuration: 6 axes (X, Y, Z, B, C1, C2) • B-axis milling spindle (indexing accuracy 0.0001°) • Milling/Main Spindle: • Tool Interface: HSK-C63 • Max Speed: 12000 rpm • Power: 18.5 / 15 kW • Max Torque: 58 Nm • B-axis Travel: 240° (±120°) • Left Spindle: • Chuck Size: Ø255 mm (10") • Max Speed: 4000 rpm • Power: 22 / 15 kW • Max Torque: 456 Nm Pedpozv Ruusfx Ai Tjgu • Right (Sub) Spindle: • Chuck Size: Ø210 mm (8") • Max Speed: 5000 rpm • Power: 18.5 / 15 kW • Max Torque: 326 Nm • Tool Magazine: 60 positions • Features: Driven tools, Full turn-mill capability • Through-Spindle Coolant: 70 bar • Programmable Coolant Pressure (7 steps) • Coolant Through Opposite Spindle • Oil Skimmer • Chuck Washing • Work Area Washing: 4.5 bar • Coolant Level and Pressure Monitoring • Oil Mist Collector Preparation • Hinged Belt Chip Conveyor • Renishaw Probing System (Measuring Head Included) • Automatic Tool Measurement • Radio Tool Measurement System RMP60 • Manual Pulse Generator (MPG) • 3-Color Signal Tower

Condition: excellent (used), Year of construction: 2026, operating hours: 3 h, functionality: fully functional, machine/vehicle number: DS-62-607, total length: 1,760 mm, total width: 1,610 mm, total height: 2,085 mm, overall weight: 1,120 kg, input voltage: 400 V, workpiece height (max.): 150 mm, input frequency: 50 Hz, workpiece width (max.): 600 mm, table height: 900 mm, input current: 14 A, This Q-Fin DS600 comes from our showroom in Bergeijk and is now available for sale. The machine has only been used for demonstrations and is therefore in excellent condition. The DS600 is fully operational and can be inspected and tested by appointment in our showroom. The DS600 is a powerful stand-alone slag hammer for the quick and efficient removal of metal slag from thermally cut sheet metal up to 600 mm wide. The machine is specially designed to effectively remove slag formation after the cutting process, making it an ideal first step in the finishing process. By removing metal slag in advance, it is prevented from causing damage to subsequent machines during further processing. In addition, the DS600 reduces contamination within the production process and positively influences the lifespan of abrasives and other consumables. The DS600 offers an efficient alternative to the manual removal of metal slag. This significantly reduces the physical strain on operators and allows products to be processed faster and with a more consistent quality. Thanks to its stand-alone design, the DS600 can be easily used as a separate machining unit or as a preparation for a subsequent finishing process. The Q-Fin DS600 combines speed, ease of use, and effective slag removal in one compact solution. This makes the machine particularly suitable for sheet metal processing companies that want to optimize their production process and reduce manual operations. Pedj Agm Rvjpfx Ai Tegu This machine is immediately available from our showroom in Bergeijk. Please feel free to contact us for more information or to schedule a demonstration.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: FND-SJ-367, total length: 595 mm, total width: 405 mm, total height: 1,195 mm, overall weight: 68 kg, input voltage: 400 V, workpiece height (max.): 20 mm, input frequency: 50 Hz, input current: 5 A, This Q-Fin SkipJoint is offered new and is available for immediate delivery from stock. The machines are ready for sale and can be delivered within a short timeframe. The SkipJoint is a compact and user-friendly machine for the quick, safe, and precise removal of microjoints in laser-cut sheet metal parts. Microjoints are small connections created during laser cutting to hold the parts in place. After the cutting process, these connections remain as small protruding edges on the product. With the SkipJoint, these microjoints can be easily removed without damaging the contours of the workpiece. Thanks to the vertically rotating sanding disc and the horizontal feed table, microjoints are removed precisely and at a right angle to the product. This ensures a clean and uniform finish. The machine is designed for manual operation and features a height-adjustable safety screen made of polycarbonate. This screen can be adjusted to the material thickness and provides extra protection during processing. The foldable steel feed table also ensures a practical and space-saving setup. The SkipJoint uses sanding discs with a diameter of 255 mm, which are available in various grit sizes and materials. Thanks to the Velcro fastening, the sanding discs can be easily and quickly replaced. Pgodo Agm Tiepfx Ai Tou The Q-Fin SkipJoint combines precision, safety, and ease of use in one compact solution. This allows sheet metal processing companies to efficiently remove microjoints, simplify manual post-processing, and achieve consistent finishing quality. These new machines are available for immediate delivery from our stock in Bergeijk. Feel free to contact us for more information or a quote.

Condition: excellent (used), Year of construction: 2023, operating hours: 300 h, functionality: fully functional, turning length: 658 mm, spindle bore: 81 mm, spindle speed (max.): 3,500 rpm, rotational speed (max.): 3,500 rpm, total height: 1,780 mm, total length: 1,729 mm, total width: 3,355 mm, workpiece weight (max.): 520 kg, overall weight: 4,300 kg, PUMA DNT 2600 is CNC lathe used for both rough and fine turning. Very fast and accurate medium-sized turning center. Psdpfxo Afma No Ai Tjgu Machine is selling with all the additional equipment that is listed below. Is in excellent condition and regularly serviced. Machine has around 300 working hours. Machine specification: -Model: PUMA DNT2600 -Controller: Fanuc I- Series -Max. turning diameter: 460mm -Max. turning length: 658mm -Left/main spindle: 26kW, 735Nm -15" display -2MB part program storage -Left/main chuck size: 255mm/10 inch -Turret with 10 tools (25x25 OD tool size, 50mm boring bar diameter) -Programable tailstock with live center MT5 -Coolant pump: 5 bar -Automatic tool setter -Parts catcher with a box -Bar feeder interface -DNS tool load monitoring -Signal light (3 colour)

Condition: used, functionality: fully functional, machine/vehicle number: 2919007, Year of construction: 2019, operating hours: 3,300 h, total length: 2,600 mm, total height: 2,700 mm, total width: 1,200 mm, type of input current: three-phase, overall weight: 1,800 kg, input voltage: 400 V, input frequency: 50 Hz, laser power: 400 W, Equipment: compressor, LM SOLUTIONS SLM 280 – 2019 – 800 HOURS – €60,000 Industrial 3D metal printer for sale – Proxicad Srl, Italy Proxicad Srl is offering for sale an SLM Solutions SLM 280, an industrial machine for the additive manufacturing of metal components, year 2019. The machine is used and is stated to be in perfect working order, with 800 operating hours recorded. The SLM 280 is intended for industrial applications requiring the production of metal components using laser powder bed fusion (LPBF) technology. Key features: Brand: SLM Solutions Model: SLM 280 Year of construction: 2019 Operating hours: 3300 Condition: used, in perfect working order according to the seller Location: Abruzzo, Italy Podpfx Ais Ad Nyps Togu Asking price: €50,000, negotiable

Condition: like new (used), Year of construction: 2022, operating hours: 400 h, functionality: fully functional, turning length: 1,030 mm, turning diameter: 460 mm, spindle bore: 81 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 265 mm, travel distance Z-axis: 1,100 mm, Doosan Puma GT2600LM, 2022. Machine with only 400 operating hours. Excellent condition. Fanuc 0i-F Plus iHMI-Touch control with Manual Guide. Max. turning length: 1030 mm Max. turning diameter: 460 mm Chuck: 250 mm Spindle bore: 81 mm Spindle: ASA A2-8 Max. spindle speed: 3500 rpm Motor: 18.5/22 kW 12-tool turret, BMT 55 Axis travels: -X: 265 mm -Z: 1100 mm -C: +-360° Live tooling Renishaw tool probe Tailstock Part catcher Included with the machine: Pgedps Aba D Hofx Ai Teu - Chip conveyor with collection tank - High-pressure pump - Documentation - 4 live tooling holders (2 angular, 2 straight)

Condition: excellent (used), Isothermal Aseptic Tank BIO-INOX 18,000 L – Stainless Steel BIO-INOX 18,000-liter aseptic tank with a double bottom and thermal insulation, designed for the storage and intermediate preservation of liquid and semi-liquid food products under controlled hygienic conditions. Its large-capacity vertical configuration and stainless-steel construction allow it to be integrated into aseptic processing industrial facilities, acting as a storage tank or buffer between thermal treatment and filling stages. The isothermal design helps limit temperature variations of the product during its stay in the tank, while its aseptic configuration is designed for processes where it is necessary to preserve the hygienic conditions of the previously treated product. MAIN FEATURES -Manufacturer: BIO-INOX -Type: Isothermal aseptic tank -Capacity: 18,000 liters -Vertical configuration -Double bottom -Stainless steel construction -Isothermal / thermally insulated design -Prepared for aseptic storage -Large storage capacity -Sanitary product connections -Stainless steel support legs -Designed for continuous industrial processes -Suitable as a buffer tank / intermediate storage -Integrable into aseptic processing and filling lines -Hygienic construction for the food industry APPLICATION The 18,000 L BIO-INOX is designed to receive and temporarily store processed product, maintaining it under controlled conditions before its transfer to the next stage of production. It can be used as an aseptic buffer tank between a sterilizer and a filler, providing accumulation capacity and helping to partially decouple the different stages of a process line. It can be integrated with: Aseptic sterilizers UHT systems Heat exchangers Sanitary pumps Homogenizers CIP systems Aseptic piping and valve systems Aseptic fillers Complete processing lines APPLICATIONS Pgjdpfx Aozxccvji Tju Particularly suitable for juice and beverage industries, fruit, tomato, puree, pulp, concentrate, sauce, and other liquid or pumpable food product processors that require intermediate storage within an aseptic process. Its 18,000-liter capacity, stainless steel construction, and isothermal configuration provide a large-capacity solution for aseptic processing and storage industrial facilities. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Pgjdpfjz D Ihfsx Ai Tou

Condition: used, Year of construction: 2023, functionality: unexamined, machine/vehicle number: MTU 12V4000 L33, type of input current: three-phase, total height: 5 mm, total length: 25 mm, total width: 3 mm, type of cooling: water, Equipment: documentation/manual, rotational speed infinitely variable, Plant assembled and NEVER put into operation Cogeneration Unit MTU 12V4000 L33 GAS GENERATOR SET Condition: New – 0 hours Enclosure: Enclosed container Rated electrical power: 1,262 kW Thermal power: 1,355 kW Electrical efficiency (cos φ = 1.0): 42.1% Thermal efficiency: 45.2% Total efficiency (full heat recovery): 87.3% Fuel consumption: • At 100% load: 299 Nm³/h • At 75% load: 232 Nm³/h • At 50% load: 167 Nm³/h Manufacturer: MTU – Centrica Business Solutions Srl Equipment designation: Type: E1265 250 Nox L33 Natural Gas CHP Unit Configuration: Containerized Rated current: 1,935 KVA Engine: Genset Rolls Royce MTU 12V4000L33 Number of cylinders: V12 Max engine power: 1,320 kW Generator: Stamford Model: PE734E-312 Type: Three-phase, synchronous, four-pole, brushless Rated voltage: 400 V Frequency: 50 Hz Dimensions (L x W x H): 12,800 / 2,700 / 2,900 mm Absorption Unit CARRIER 16LJ-F41 Condition: New – 0 hours Enclosure: Enclosed container Capacity: 1,178 kW Cooling System Flow rate: 56.4 L/sec Pressure: 45 kPa Connection (DIN): 8” (inch) Volume: 0.48 m³ Heat Rejection System Flow rate: 93.1 L/sec Podpfx Asydqlqsi Tsgu Pressure: 117 kPa Connection (DIN): 10” (inch) Volume: 1.39 m³ Dimensions (L x H x W): 5,330 x 3,080 x 1,690 mm Weight: 13,700 kg Evaporative Cooling Towers: No. 2 Condition: New – 0 hours

Condition: used, Year of construction: 2023, overall weight: 9,600 kg, DN SOLUTIONS PUMA TT2100SYYB (2023) – Twin Spindle / Twin Turret CNC Turning Center For sale: DN SOLUTIONS PUMA TT2100SYYB, manufactured in April 2023, equipped with twin spindles, twin turrets, dual Y-axis, driven tools, and an LNS automatic bar feeder. High-productivity CNC turning center designed for precision and high-volume manufacturing of complex components. Machine specifications Manufacturer: DN Solutions (Doosan) Model: PUMA TT2100SYYB Year of manufacture: 2023 (April) Serial number: ML0429-000147 CNC control: DOOSAN-FANUC i Series Plus Maximum turning diameter: 230 mm Maximum turning length: 230 mm Main spindle chuck size: 10" Sub-spindle chuck size: 8" Main spindle bar capacity: 81 mm Sub-spindle bar capacity: 65 mm Main spindle speed: 3,500 rpm Main spindle power: 22 kW Sub-spindle speed: 5,000 rpm Sub-spindle power: 25 kW Turrets: 2 × 12 stations Live tooling: Both turrets Live tool speed: Up to 5,000 rpm Pgedj Aa Abrjpfx Ai Teu Y-axis: Upper and lower turret Y-axis travel: ±50 mm C-axis: Both spindles Machine weight: 9,600 kg Additional equipment LNS Quick Load Servo 80 S2 automatic bar feeder Automatic machine doors (CNC Autodoor) External coolant pumping system 15 bar Chip conveyor Twin driven-tool turrets Main and sub-spindle configuration LNS Bar Feeder Model: Quick Load Servo 80 S2 Bar diameter range: 6–80 mm Maximum bar length: 1,605 mm - with spindle extender included in the price Servo-controlled automatic bar loading Automatic diameter adjustment Highlights Complete front and back machining in a single production cycle Simultaneous operations using two independent turrets Two Y-axes for complex milling and drilling operations Automatic bar-fed production Suitable for high-volume precision manufacturing Modern 2023 machine Machine location: Slovenia, European Union Price: On request Inspection: Available by appointment Additional information, photographs, and machine inspection are available upon request.

Condition: new, TECHNICAL DATA: - Base area: 10,000 x 24,000 mm [other configurations available] - Grid pattern: 5,000 x 6,000 mm - Finished floor height: 3,340 mm - Clear height: 3,000 mm - Flooring: 38 mm raw/white chipboard, P6 quality - Load capacity: 350 kg - Colour: RAL of your choice - Condition: new The mezzanine platforms are expandable in the specified grid as standard. Other sizes and heights available upon request. Our team will be pleased to advise you! Delivery scope: Pgodpfxexpizae Ai Tju - Columns - Primary and secondary beams - Cross bracing - Flooring - Fastening material Sample prices: 30 m² | Dimensions: 5,000 x 6,000 mm | €2,685.00 net, excl. shipping and VAT 60 m² | Dimensions: 5,000 x 12,000 mm | €4,785.00 net, excl. shipping and VAT 90 m² | Dimensions: 5,000 x 18,000 mm | €6,855.00 net, excl. shipping and VAT 120 m² | Dimensions: 5,000 x 24,000 mm | €8,955.00 net, excl. shipping and VAT 60 m² | Dimensions: 10,000 x 6,000 mm | €4,785.00 net, excl. shipping and VAT 120 m² | Dimensions: 10,000 x 12,000 mm | €8,645.00 net, excl. shipping and VAT 180 m² | Dimensions: 10,000 x 18,000 mm | €12,495.00 net, excl. shipping and VAT 240 m² | Dimensions: 10,000 x 24,000 mm | €16,335.00 net, excl. shipping and VAT Further versions available. Please contact us for more information. Optional accessories: - Guard railing - Flush wall connection - Staircase - Transfer station - Impact protection - Diagonal braces instead of cross bracing available at extra cost YOUR CONTACT PERSONS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM PLANNING & MADE-TO-MEASURE MANUFACTURING This mezzanine platform represents an example from our standard range. Of course, we develop and manufacture your storage platform precisely according to your business requirements—tailored to surface area, load-bearing capacity, installation height, and intended application. Our planning department will prepare a customized, non-binding offer tailored to your specifications. Whether new construction, expansion, or modernization of existing systems—we support you with extensive expertise and practical solutions. TRANSPORT & INSTALLATION We are happy to assist you with transport and installation. This item is available for pick-up. Delivery or shipping is available at additional cost. Additional charges are based on the delivery location and the volume of the shipment and can be requested individually from us. PAYMENT TERMS Payment conditions will be agreed upon in the event of an order. The quoted price is the unit/net price, or as stated in the description (plus VAT). You will of course receive an invoice indicating VAT. ABOUT US DLK in Nordhorn trades in new and used products in the fields of warehouse logistics, conveying technology, mezzanine platforms, textile racking, as well as machinery for trade, industry, and the trades. We continuously offer attractive used equipment from a variety of manufacturers/brands on favorable terms. If you have any questions, feel free to contact us. ✅ Four wins—the success factors of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions

Condition: used, Year of construction: 2022, machine/vehicle number: 01, General description The item for sale is an industrial laser marking machine by Solutions SK, model LM9 (designation FD060). The machine is from the 2022 production year and represents a complete solution for precise marking of parts, enclosed in a safe, free-standing housing. Technical data and specifications Manufacturer: Solutions SK Laser Machine model: Laser LM9 / LM9/B3 Designation / ID: FD060 Serial number: 01 Pgedpfxsz R Eiue Ai Tou Date of manufacture: 07.2022 (Code: 22-07-00) Control interface: Industrial SIEMENS SIMATIC HMI TOUCH touchscreen panel Operating panel: Equipped with hardware buttons for START, RESET, STOP, a switch for working light (SVETLO), and a main emergency stop switch (NÚDZOVÉ ZASTAVENIE).

Condition: used, Year of construction: 2001, machine/vehicle number: 20010329, Offer 17500 Technical data approx.: - Nominal power approx. 100 kVA - Projection approx. 350 mm - Arm distance approx. 200 mm Pgedpfx Aiov Eak Ij Tou - Arm diameter approx. 50 mm - Double stroke cylinder type X - Z force at 10 bar approx. 2400 daN - Working stroke approx. 20 mm - Arm distance approx. 200 mm - Separate control cabinet HARMS + WENDE - Total weight approx. 250 kg

Condition: excellent (used), HORIZONTAL TANKS: 10 units of 40,000 liters each. Pedps Agn Sysfx Ai Tjgu 7 units of 50,000 liters each.

Condition: excellent (used), Converging Solutions converging conveyor Model: High Speed Variable speed control Serial number: 5054 Year of construction: 2002 240 V, 1 Ph, 50 Hz, 16 A Belt width: 625 mm and (3x) 135 mm Total dimensions: 1460 mm x 1000 mm x 1140 mm. Pgsdpfxev Tz Tmj Ai Tju

Condition: used, Year of construction: 2022, operating hours: 1,990 h, Doosan DN Solutions LEO 1600 Year 2022 Fanuc i Plus control system 6-inch (170mm) chuck Spindle bore 45mm Travels: X-175mm Z-330mm Max turning diameter 320mm Max turning length 303mm 12-tool turret MT4 tailstock Included with the machine: Chip conveyor with tank and pump Very good condition PDF specification file available Pgedpfxez R S T Io Ai Tou

Condition: used, Empty weight: 8.700 kg Dimensions (LxBxH): 90 x 72 x 110 cm Serial number: 98077 Control system: Mazatrol M32B Pgodpfjz R S Tuex Ai Teu X-axis: 1050 mm Y-axis: 510 mm Z-axis: 560 mm Work table dimensions: 1300 × 550 mm Maximum load: 1,500 kg Spindle: Taper: BT50 / CAT50 Speed: 25 – 6,000 rpm Power: 15 kW / 18.5 kW (peak) Tool changer: 1 Capacity: 30 tools Weight: 8,700 kg Power supply: 380 volts Overall dimensions: 3,000 × 3,800 × 2,250 mm Includes: Matching tool cabinet with various tool holders Tool cabinet dimensions: 900 x 720 x 1100 mm Online auction of metalworking machines, woodworking machines, overhead cranes, workshop equipment, and lumber inventory, including an AMADA Arcade 210 CNC punch and nibbler, MAZAK VTC-41L and MT-V-515 vertical CNC machining centers, MAZAK Super Turbo-X 48 Mk II CO₂ laser cutting machine, BYSTRONIC Byjet 4022 CNC waterjet cutting machine, TECNOMA profiling and roll forming machines, ELUMATEC and EMMEGI aluminum sawing machines, HACO ERMS 200-metric-ton CNC press brake, ADIRA CNC press brake, LEFORT C 265T hydraulic scrap baler/shear combination, ESAB Pegasus CNC plasma cutting machine, GEMA powder coating machine with drying oven and exhaust system, EURO-MAC punching and nibbling machine, various KONE and DEMAG overhead cranes, VECOPLAN industrial shredder, NEDERMANN filter unit, METORA band saw, various metalworking and woodworking machines, panel saws, edge banders, milling machines, drills, compressors, workbenches, teak beams, sawn logs, and various accessories, etc. The online auction opens Wednesday 14 October and closes Tuesday 24 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 17 November Pickup days are on: - Tuesday 1 December - Thursday 3 December Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Year of construction: 2019, Overview Complete 10 hl craft brewery around a BBC INOX Essential 1000 steam-heated two-vessel brewhouse, installed in 2019. One package from milling to bottling: brewhouse, hot liquor, wort cooling, steam and water treatment, fermentation with glycol cooling, filling, labelling and capping, a walk-in cold room for bottle conditioning, plus handling and cleaning equipment. Suited to a new brewery or a brewpub moving up to 10 hl; fermentation capacity can be extended. Technical data - Brew length: 10 hl (1,000 L) per brew - Brewhouse: 2 vessels, AISI 304, steam-heated Pgodpfx Asz E U Diei Tou - Fermentation: 3 x 18 hl gross (approx. 15 hl working), AISI 316, atmospheric - Cellar output: approx. 700-800 hl/year with 3 fermenters on 3-week cycles - Year: 2019 Scope of Delivery - Brewhouse | BBC INOX | ESSENTIAL 1000 | mash/boil kettle 1,600 L, steam-heated, whirlpool inlet; lauter tun 1,300 L with false bottom and rake; AISI 316 wort pump, grant, platform and stairs; control panel with 15 recipes | 2019 - Hot liquor tank | 2,000 L | AISI 304, internal steam coil, CIP spray ball, manway, level gauge, pump; approx. H 3,100 x D 1,270 mm - Plate heat exchanger | Kelvion | NT 25 PH | AISI 316 plates, 2,000 L/h, wort 98 to 12.8 °C - Cylindro-conical fermenters, 3 units | BBC INOX | 18 hl | AISI 316, 60° cone, dual-zone glycol jackets, individual temperature controllers, CIP spray ball, sampling valve - Glycol chiller | outdoor monobloc, glycol down to -5 °C, buffer tank and circulation pump - Steam generator | process steam for brewhouse and hot liquor tank - Water softener | ion-exchange column with brine tank - Bottling / priming tank | BBC INOX | AISI 304/316, polished, level gauge - Linear gravity bottle filler | 6 filling spouts, 480 L/h, 33 / 50 / 75 cl, AISI 304 on trolley - Semi-automatic labeller | OMB | front and back label on round bottles, photocell, 230 V | 2019 - Crown capper | AIR-MATIC | pneumatic column capper, 26 / 29 mm crowns - Walk-in cold room | 5.30 x 3.10 x H 2.50 m, dismountable panels, +2 to +10 °C - Malt mill | two hardened-steel rollers, adjustable gap, 25 kg hopper, 1.5 kW - Digital floor scale | stainless steel low-profile platform, tare and dosing - Semi-electric stacker | Jungheinrich | HC 110 | 1,000 kg, lift height 1,600 mm, 12 V, integrated charger | 2019 - Manual hydraulic stacker | BASIC | D 1025 | 1,000 kg, fork lift 85-2,500 mm - Floor scrubber-dryer | Lindhaus | LW 38 PRO - Stainless steel workbench | AISI 304, 200 x 70 x H 85 cm - Wire-mesh storage baskets | foldable, stackable, 112 x 77 x H 95 cm - Food-grade hoses and stock | hoses with DIN fittings; approx. 1,600 empty bottles, 250 cartons, 3 x 20 L kegs, 2,000 crown caps Condition Used, visually very good, clean installation, still installed and under power. The fermenters are atmospheric: carbonation by bottle conditioning or via an additional pressure tank. Chiller, cold room and steam generator must be disconnected by certified technicians. Availability Immediately. Location: Italy. Dismantling and loading by the buyer. The brewhouse, hot liquor tank and heat exchanger are also available as a separate package.

Year of construction: 2017, condition: ready for operation (used), Granulator THM ZM 600 / MeWa UG 600 Podpezhg Eyefx Ai Tsgu Drive power: 55 kW Rotor length: 600 mm Rotor diameter: approx. 480 mm Number of knives: 18 rotor knives and 3 stator knives Rotor speed: The machine can operate at 4 different speeds if required: 257 rpm / 317 rpm / 343 rpm / 422 rpm. Weight: approx. 5500 kg Control cabinet brand new (original from THM recycling solutions GmbH) Hydraulic feed pressure device (HNDE), feed hopper