Used Function Generator for sale (27,190)

Condition: used, Function generator, oscilloscope -Frequency range: 0.2 Hz to 240 kHz -Dimensions: 225/225/H85 mm -Weight: 1.2 kg Kjdpjb Nkt Iofx Afdjlr

Year of construction: 2025, condition: new, functionality: fully functional, Complete - New MWM and CAT GAS generator set, CHP as option, Generator 10500V/50Hz. Klodsv Uag Ijpfx Afder

Year of construction: 2012, operating hours: 10 h, condition: like new (used), functionality: limited functionality, The generator was involved in the development of a vertical wind turbine and, due to the termination of the project, has very few operating hours. The control cabinets were assembled in Offenburg. Kljdpsyl Nntjfx Afdor

Condition: used, Year of construction: 2023, PSA Nitrogen Gas Generator NITRO Source N2 Parker N2-75 PALY VIG 1000 Liter Klsdpfx Afox U Tgmjder Year of manufacture: 2023 The unit looks as good as new. The system was only in operation for a short period.

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Kedpsxfrv Esfx Afdslr Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean

Condition: used, Year of construction: 1990, MAN 125KVA diesel generator Kodpfjw U N Daex Afdelr

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Kledpfx Afsruakgjdor Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: new, functionality: fully functional, machine/vehicle number: SH 200, Heat Recovery Co-Generation System, featuring: Integrated by: Wartsila Heat Recovery Steam Generator System; Alfa Laval Steam Header SH 200, Alfa Laval Vertical Exhaust, Gas Boilers, Model AV-6N, Alfa Laval Steam Drum HK-10-2, Alfa Laval Feed Water Control Unit, Alfa Laval Condensate Transfer Pump RDD 901, NCE Boiler Washing Water Tank, Alfa Laval Blow Down Cooling Module, Alfa Laval Aalborg Oy WES Technik T-Piece Damper, Wartsila Logics Controls, Alfa Laval R1 Heat Recovery, Universal Vent Silencer, SWAS pH Water System (containerized). Kledpfjyf N Umex Afdor Sistema de cogeneración con recuperación de calor, que incluye: integrado por generador de vapor de recuperación de calor Wartsila; cabezal de vapor Alfa Laval SH 200; escape vertical Alfa Laval; calderas de gas Alfa Laval, modelo AV-6N; tambor de vapor Alfa Laval HK-10-2; unidad de control de agua de alimentación Alfa Laval; bomba de transferencia de condensados Alfa Laval RDD 901; tanque de agua de lavado de calderas NCE; módulo de enfriamiento de purga Alfa Laval; compuerta tipo “T-Piece Damper” Aalborg Oy WES Technik de Alfa Laval; sistema de control lógico Wartsila; recuperación de calor Alfa Laval R1; silenciador universal de ventilación; sistema de agua SWAS para control de pH (contenedorizado).

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Klsdpfx Aoxaqa Ssfdsr Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: used, Year of construction: 1977, machine/vehicle number: 19909, Equipped with: Index Plate Geneva Cam Cutter Body Hydraulic Work Clamping Kljdpfx Afoxdfazodor Coolant Pump & Tank Chip Conveyor Additional Cutter Bodies, Index Plates & Geneva Cams Available Specifications: Minimum Outside Cone Distance: 2.75" Maximum Cone Distance: 10" Maximum Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 Deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 15.6 to 87.7 RPM Feeds (seconds/tooth): 5 to 34.3 Main Motor: 10hp, 1800 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approximate Floor Space: 118" x 86.5" Needed Overall Height: 70" Approximate Net Weight: 18,820 lbs Shipping Weight Boxed for Export: 20,500 lbs

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Kodpfx Afjxdfa Uodjlr Stock Divider Hydraulic Work Clamping Chip Conveyor Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Kodpfsrtryksx Afdslr Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: used, This listing is for a Bioquell Clarus L Hydrogen Peroxide Vapour (VHP) Generator. The unit is in full working condition and ready for immediate use. A mobile system designed for surface bio-decontamination of labs, isolators, and equipment, providing 6-log sporicidal reduction Kjdpfx Afsy D T Ngodolr

Condition: like new (used), Year of construction: 2011, operating hours: 36 h, machine/vehicle number: 02573550-060, color: green, power: 310 kW (421.48 HP), output frequency: 50 Hz, nominal power (apparent): 345 kVA, Used Diesel Generator – Cummins | 352 HP / 263 kW Standby | Enclosed | With Fuel Tank Technical Specifications: Engine Brand: Cummins Klodpowzirxofx Afder Engine Model: QSL9-G5 Standby Power: 352 HP /263 kW at 1800 rpm Prime Power: ~310 HP / 231 kW at 1500 rpm Voltage: 400/231 V Frequency: 50 Hz RPM: 1500 Fuel Type: Diesel Cooling: Liquid-cooled Control Panel: Included Fuel Tank: Integrated base frame fuel tank (visible on photos) Condition: Used – very good visual and operational condition Soundproof Enclosure: Yes Manufacturing Label: Frame code 4A9A145639

Condition: excellent (used), Year of construction: 2010, operating hours: 122,471 h, functionality: fully functional, power: 1,095 kW (1,488.78 HP), fuel: domestic gas L, rotational speed (min.): 1,500 rpm, type of input current: three-phase, Jenbacher J320 GS Gas Generator – 1095 kW Main specifications: Engine model: Jenbacher J320 GS Rated power: 1095 kW (ISO 3046) Speed: 1500 rpm Engine weight: 5200 kg Year of manufacture: 2010 Running hours & performance: Total operating hours: 122,471 h Active energy produced: 11,781 MWh Reactive energy: 7,327.8 Mvarh Alternator: Manufacturer: Stamford (AC Generators) Bearing types: 6319 C3 / 6228 C3 Grease type: Kluber Asonic GHY72 Re-lubrication interval: every 4000–4500 hours Heat exchanger: Manufacturer: Tranter International AB Model: GXD-042 Year of manufacture: 2010 Max. operating pressure: up to 30 bar Max. operating temperature: up to 75 °C Connection material: steel Condition: Equipped with Jenbacher DIA.NE control and monitoring system Kljdpfx Afjxb D Hbsdor Fully serviced in line with OEM schedules by an official service centre Excellent working condition 📍 Location: England

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: DK32037U640362L, overall weight: 975 kg, fuel type: diesel, tank capacity: 120 l, rotational speed (max.): 1,500 rpm, New ETT-50P generator from year 2026! TECHNICAL DETAILS Speed (max.): 1,500 rpm Power factor: 0.8 MACHINE DETAILS Output current: 72 A Kedey Emwyspfx Afdjlr Output voltage: 400 V Output frequency: 50 Hz Type of output current: three-phase Continuous power (apparent): 50 kVA Emergency current: 72 A Voltage: 400/230 V Phases: 3 Fuel type: Diesel Tank capacity: 120 l Dimensions & Weight Dimensions (L x W x H): 2,200 x 1,060 x 1,373 mm Total weight: 975 kg EQUIPMENT CE marking Suitable with ATS switching system for mains takeover

Condition: used, This listing is for Peak Scientific Nitrogen Generator Corona 1010 + Corona compressor The unit is in full working condition and ready for immediate use Designed to provide a consistent, high-purity nitrogen supply for LC-MS applications. Compact and efficient, the Corona 1010 with integrated compressor ensures reliable performance and reduced reliance on gas cylinders in laboratory environments. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Kodpfxsy Dp A Aj Afdolr Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: new, Year of construction: 2026, machine/vehicle number: 20251112018, fuel type: diesel, motor manufacturer: Cummins QSK19-G11, General information Field of application: Construction Weights Empty weight: 7.200 kg Functional Generator capacity: 800 kVA CE mark: yes Other information Fuel consumption: 115 Liter/Hour at 75% Load Generator: Leroy Somer TAL-A49B Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1065 l Transport dimensions (LxWxH): 5x1,95x2,5 Kodpfx Aoxb Nx Aefdslr Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: used, Used Oxymat O500 PSA industrial oxygen generator made in 2012 and with capacity 40.6 m3/hour. Containerised system that includes the following equipment: - Almig 45 belt air compressor, cyclone separators, air receiver, Donaldson DCO 360 AB dryer, Donaldson ultrafilter, Oxymat 2-column O500 system, oxygen receiver, Oxymat control panel, Rix compressor, low oxygen gas detection system. - Not suitable for medical oxygen. Ksdpfoyt Rc Iex Afdelr

Condition: new, Year of construction: 2025, machine/vehicle number: CAT00C18A2S400367, fuel type: diesel, motor manufacturer: Caterpillar C18, General information Field of application: Construction Weights Empty weight: 5.952 kg Functional Generator capacity: 715 kVA CE mark: yes Kodpfxeyvx S Ds Afdjlr Other information Fuel consumption: 107 Liter per Hour at 75% Load Generator: Caterpillar A3355L4 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1082 l Transport dimensions (LxWxH): 5,32x1,92x2,29 Additional information Please contact Ronald van der Laar, Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: like new (used), Year of construction: 2010, operating hours: 57 h, functionality: limited functionality, machine/vehicle number: op aanvraag, overall weight: 4,000 kg, fuel type: diesel, color: white, output frequency: 50 Hz, nominal power (apparent): 165 kVA, continuous power (apparent): 150 kVA, rotational speed (max.): 1,500 rpm, type of cooling: air, Turnkey Emergency Power Container (165 kVA) with AEG UPS System in swap body container. Are you looking for a comprehensive, ready-to-use solution for your business continuity? This heavy-duty emergency power installation offers the ultimate protection against power outages and voltage fluctuations. The entire setup is housed in a high-grade, climate-controlled container. The Installation Includes: 1. SDMO / John Deere Diesel Generator (165 kVA) Output: 165 kVA Stand-by / 150 kVA Continuous (400V). Engine: Reliable John Deere 6068 6-cylinder turbo diesel. Alternator: Leroy Somer LSA 44.2 with R438 AVR (automatic voltage regulator) for an extremely stable sine wave—essential for sensitive electronics. Condition: Recent year of manufacture (2019), excellently maintained. 2. AEG Power Solutions UPS System Provides seamless bridging (0 ms transfer time) in the event of grid failure. Klsdpfoy D Ubqsx Afdsr Filters electrical noise and protects your equipment against voltage spikes and drops. Seamless communication with the SDMO generator for extended backup operations. 3. Climate-Controlled Container Housing Air Conditioning: Equipped with an industrial air conditioning system to keep UPS batteries and electronics at optimal operating temperature, regardless of external conditions. Security: Robust, lockable container suitable for direct outdoor placement (saving valuable indoor space). Plug-and-Play: Central connection points for easy integration into your existing infrastructure. Why choose this set? This configuration is specifically designed for critical environments where power loss is not an option, such as data centers, medical facilities, or high-end production lines. The combination of the powerful John Deere engine and the precision of AEG UPS ensures a true "no-break" power supply. Full technical specifications available on request. Price: €34,950 excl. VAT

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 1,460 kg, fuel type: diesel, color: grey, continuous power (apparent): 138 kVA, total length: 2,950 mm, total width: 1,050 mm, total height: 1,300 mm, motor manufacturer: Cummins 6BTA5.9-G2, Standby generator with 138 KVA output Year of manufacture: 2026 Condition: New 50 Hz Dimensions: 2.95m x 1.05m x 1.30m Engine manufacturer: Cummins 6BTA5.9-G2 Alternator: Leroy Somer TAL-A44-E Weight: 1,460 kg CE marked Kedoy Egy Ispfx Afdolr If you have any questions, you can contact us at any time.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 1,190 kg, fuel type: diesel, color: grey, output frequency: 50 Hz, continuous power (apparent): 88 kVA, total length: 2,500 mm, total width: 1,000 mm, total height: 1,250 mm, motor manufacturer: Cummins 4BTA3.9-G11, Emergency power generator, 88 kVA output Year of manufacture: 2026 Condition: New Kledpfxjy Egxds Afdjr 50 Hz Dimensions: 2.5 m x 1.00 m x 1.25 m Engine manufacturer: Cummins 4BTA3.9-G11 Alternator: Leroy Somer TAL-A44-C Weight: 1190 kg If you have any questions, you can contact us at any time.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 1,430 kg, fuel type: diesel, color: grey, continuous power (apparent): 110 kVA, total length: 2,950 mm, total width: 1,050 mm, total height: 1,300 mm, motor manufacturer: Cummins 6BT5.9-G2, Emergency power generator with 110 kVA output Year of manufacture: 2026 Condition: New 50 Hz Dimensions: 2.95 m x 1.05 m x 1.30 m Engine manufacturer: Cummins 6BT5.9-G2 Alternator: Leroy Somer Weight: 1,430 kg Klodoy Egp Nspfx Afder If you have any questions, you can contact us at any time.

Condition: excellent (used), mileage: 70,031 km, power: 169 kW (229.78 HP), first registration: 02/2010, fuel type: diesel, tire size: 315/70 R22,5, axle configuration: 4x2, wheelbase: 6,100 mm, fuel: diesel, color: grey, gearing type: automatic, emission class: euro5, suspension: air, total length: 11,100 mm, total width: 2,550 mm, permissible axle load (axle 1): 7,100 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2010, Equipment: ABS, air conditioning, central locking, electric window regulation, navigation system, power assisted steering, power mirror, trailer coupling, = Additional Options and Equipment = - Aluminum fuel tank - Heated mirrors - Cabin - Refrigerator - Air suspension - Air-suspended seats - Metallic paint - Radio/CD player - Reversing camera - Side door - Pre-heating system - Toolbox - Power take-off (PTO) = Notes = Kljdpfx Ajyvh H Rofder Multi-purpose vehicle (motorhome?), in excellent condition, comprehensively renovated in 2021, only 70,031 km. Fully equipped kitchen with cabinets, countertops and range hood, water connection and refrigerator, LED lighting, wardrobes, air conditioning, 22 kVA generator, 4 hydraulically operated stabilizer legs, fully accessible roof with folding railings, pneumatically operated Clark transmitter mast (approx. 12 m high). Automatic transmission with 3 pedals, 3 seats, air conditioning, CPV, electric windows/mirrors, reversing camera, navigation system, 5-cylinder diesel engine, 90% tire tread, twin tires, trailer hitch, Dutch registration with valid technical inspection until October 5, 2026. = Further Information = Technical Information Number of cylinders: 5 Engine capacity: 9,290 cc Axle Configuration Tire size: 315/70 R22.5 Brakes: Disc brakes Suspension: Air suspension Front axle: Max. axle load: 7,100 kg; Tire tread left: 90%; Tire tread right: 90% Rear axle: Twin tires; Max. axle load: 11,500 kg; Tire tread left inner: 90%; Tire tread left outer: 90%; Tire tread right inner: 90%; Tire tread right outer: 90% Weights Curb weight: 14,450 kg Payload: 4,150 kg Gross vehicle weight: 18,600 kg Maintenance, History and Condition APK (Technical Inspection): valid until 10/2026 Technical condition: very good Visual condition: very good Identification Registration number: BX-JZ-01 More Information Please contact Arne Honingh for further details.