Used Gm Gera Arcade Gek for sale (2,352)

Condition: used, Year of construction: 2024, Overview The bottle washer was previously used in a brewery. Due to the low number of operating hours, the machine is in very good condition, like new. It was replaced, as the previous owner wanted to run bottle formats, which did not fit this machine. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported. The machine comes with 12months warrantee. Tech Specs: - Capacity: 9,500 bph - Cell Pitch: 95 mm - Bottles per row: 25 - Dimensions + Weights: Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg Ready for operation with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg - YOM 2024 - Formats: - 0,25l - 0,33l - 0,5l - 0,75l The Machine in Detail / Equipment Features: Lhjdpfx Ajvrfivemzsn - Heated by steam - Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing - CE certified - Chemical Dosing Pumps - Machine data sheet included - High pressure pre rinsing - Rotating Spray nozzles - Single End Machine - Label discharge rear right - Finger discharge + finger feed - Bottle cells made of plastic - Concentration measurement - NaOH supply liquid - Sectional view arrangement of baths - Spindles SST - 24 volt control voltage - Control Siemens S7 - Regularly maintained - Full machine body in SST - Vapor Discharge - Machine dismantled, ready to ship - Automated machine Startup

Condition: used, Year of construction: 2007, Cleaning machine, manufacturer GM Gera, model: Arcade GEK2.1RV1, for 4,000 bottles/hour, 9 bottles/row, for 0.5 l NRW bottle, cell pitch 95mm, with pre-diverter, caustic bath 1+2, hot water bath 1+2, cold and fresh water spraying. Contact us for further information. Lhedpfoxghnaox Amzsn

Year of construction: 2024, condition: ready for operation (used), Nominal output: 9500 bottles/h (based on 0.5 litre NRW bottle, 68x260mm, 370g), mechanical control range: 3800-10,450 bottles/h, cycle time: 9.47s, total bottle cells: 3375, filled: 3175, per row: 135 basket rows, cell pitch: 95mm, chain pitch: 140mm, drive lanes: 3 lanes, discharge lanes: 3 lanes. Total throughput time: 21.32min, total immersion time: 7.24min, caustic immersion time: 5.34min, caustic filling time: 7.05 min, caustic contact time: 9.91min, total rinse time: 123s, total spray time: 47s, water consumption: 2.61m³/h, 275 ml/bottle, heat consumption (operation): 721. 715 kJ/h = 172,247 kcal/h, 75.97 kJ/bottle = 18.1 kcal/bottle, heat consumption (heating): 2,880 MJ = 687,467 kcal, total installed power: 27.2kW, pump power: 20.4kW, drives: 5.7kW, compressed air consumption (at 6bar): 0.2m³/h, dimensions housing: 7162x2740x2500mm. Overall dimensions: 7162x3540x2730mm, minimum access opening (W x H): 3840x2000mm, minimum ground clearance: 75 ± 25mm, height of infeed/outfeed: 645/1165mm, empty weight: 11,680kg, operating weight: 31,563kg, floor load: 8690kg/m², load per spherical base: 2130kg, number of spherical bases: 12. The machine has been running for approx. 6 months, so it is almost as good as new, including documentation. An on-site inspection is possible. Lodpjwb E S Iofx Amzjhn

Condition: used, Year of construction: 2010, Overview   This ARCADE GEL 6 bottle washer was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and must be replaced due to an increase in performance.   Technical details   Nominal output: 33,000 bph   Control range: 13,200 - 36,300 bph   Chain pitch: 169 mm   Cell pitch: 110 mm   Bottle cells per row: 30 pieces   Total bottle cells: 7,860 pieces   Bottle cells, loaded: 7,680 pieces   Consumption  Compressed air: 1m³   Steam (operation): 489 kg/ h   Steam (heating): 4,430 kg/ h   Electrical power: 48.4 kW   Water: 7.35 m³/ h   Bath volume   Pre-soak: 2,263 l   Pre-caustic: 7,240 l   Caustic 1: 31,755 l   Caustic 2: 350 l   Hot water 1: 350 l  Hot water 2: 350 l   Cold water: 350 l  Lsdpfx Ajt Ul Exomzehn

Condition: used, Year of construction: 2005, Overview Lhedpfx Aezbha Homzen The bottle washer was previously used in a mineral water factory. Due to the good maintenance, the machine is in good condition. All basins and the machine body are made of stainless steel. The machine is still working and will be free in early 2027, when the complete line is replaced. Tech Specs - Capacity: 15,500 bph - Cell Pitch: 95mm - Bottles per row: 16 - Dimensions + Weights: Housing: 8350 x 1,860 x 2,990 mm / 21,750kg Ready for operation with attachments: 8,700 x 3,560 x 3,330mm / 37,639kg - YOM 2005 - Formats: - 0,5l - 0,75l The Machine in Detail / Equipment Features - Heated by steam - Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing - CE certified - Chemical Dosing Pumps - Machine data sheet included - Rotating Spray nozzles - Single End Machine - Label discharge rear right - Label press mounted to the machine - Finger discharge + finger feed - Bottle cells made of plastic - Concentration measurement - NaOH supply liquid - Sectional view arrangement of baths - Spindles SST - Control Siemens S7 - Regularly maintained - Full machine body in SST - Vapor Discharge

Condition: used, Year of construction: 1999, Overview The bottle washer was previously used in a brewery. Due to the complete reconditioning in 2005 and continuously maintentance, the machine is in very good condition. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported.  Tech Specs: - Capacity: 6,700 bph - Cell Pitch: 102 mm - Bottles per row: 10 - Dimensions + Weights: Housing: 7,200 x 1,300 x 2,850 mm / 13,500 kg Ready for operation with attachments: 7,790 x 3,450 x 2,950 mm / 20,000 kg - YOM 1999 - Formats: - 0,33l - 0,5l The Machine in Detail / Equipment Features: - Heated by steam - Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing - CE certified - Chemical Dosing Pumps Lsdpfxswg E D Ie Amzohn - Machine data sheet included - High pressure pre rinsing - Rotating Spray nozzles - Single End Machine - Label discharge rear right - Finger discharge + finger feed - Bottle cells made of plastic - Concentration measurement - NaOH supply liquid - Sectional view arrangement of baths - Spindles SST - 24 volt control voltage - Control Siemens S7 - Regularly maintained - Full machine body in SST - Vapor Discharge - Machine dismantled, ready to ship - Automated machine Startup

Condition: used, Year of construction: 1993, Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operating side left CE certified Chemistry dosing pumps Machine data sheet Fixed pipe spraying controlled by machine cycle Single-end machine Label discharge rear right Finger discharge + finger feeding Bottle discharge left Bottle cells plastic HMI Lauer Lye concentration measurement 24 Volt control voltage Control S5 (on request conversion to S7) Regularly maintained Water part in VA Fume extraction Sampling taps KSB pumps in VA Plug-in strainers for baths Water meter Conductivity measurement from Endress Additional Equipment: Spare parts included   Lhedpjl Hx Adjfx Amzsn

Condition: used, Year of construction: 2003, Cleaning machine, manufacturer: GM Gera, type: Arcade, for 24,000 bottles/h, adjustable range 7,600 – 26,400 bottles/h 25 bottles/row basket pitch 95 mm, chain pitch 140 mm with Siemens S7 control system dismantled, available for inspection at warehouse Ljdpsyzdq Nefx Amzehn

Condition: used, Year of construction: 2012, Overview This returnable glass bottling line consists of equipment from KRONES, KETTNER, GM GERA, RINK, SYSCONA, MATEC, FALTERBAUM, Bohrer and further supporting manufacturers. The line is designed for the processing of returnable glass bottles in crates, mainly in 0.33 L and 0.75 L formats. It includes the key process steps from crate depalletizing, crate sorting, bottle decapping, unpacking, bottle washing, empty bottle inspection, filling and screw capping to labelling, full bottle inspection, crate packing, crate inspection and palletizing. The existing crate depalletizer and palletizer are available on site; however, due to their age and outdated technology, it is recommended not to include this unit in the line acquisition. Instead, suitable modern depalletizing equipment can be offered and integrated into the line concept according to the buyer’s requirements. The line has a nominal filling capacity of approx. 18,000 bottles per hour and the premix system rated at 22,000 L/h. The line is scheduled for dismantling in February 2027. Technical Data - Line type: Returnable glass bottling line - Application: Beverage filling in returnable glass bottles Lhodpsza Tx Sefx Amzsn - Formats: 0.33 L and 0.75 L glass bottles - Packaging: Bottles in crates - Filler capacity: 18,000 bottles/hour - Premix capacity: 22,000 L/hour - Closure type: Plastic screw caps - Labelling: Wet glue labelling, 2 aggregates - Main machine years: 1996 – 2016 - Dismantling planned: February 2027 Scope of Delivery - Crate Depalletizer | Existing unit on site; not recommended for takeover due to outdated technology. Suitable replacement equipment can be offered and integrated - Crate Sorting System | Syscona | Expert KSA | Sorting on 2 lanes: good / bad | 2014 - Crate Decapper | RINK | KM 690/4K | 2012 - Crate Unpacker | Kettner | Robot Junior RA3/C-T | 1996 - Bottle Washer | GM GERA | ARCADE GEL3 FV1-186/95-16 | 2005 - Crate Washer | Bohrer | R 30 | Crate washing machine | 2011 - Empty Bottle Inspector | Krones | Linatronic | 2014 - Filler / Screw Capper | Krones | Volumetic / Modulfill | 2012 - Labelling Machine | Krones | Universella | 2012 - Closure Inspection | Syscona | Expert FHK | 2016 - Inspection System | Krones | Checkmat 731 | 2012 - Crate Packer | Kettner | 1996 - Crate Inspection | Krones | Checkmat 708 | 2011 - Palletizer | Matec | Rotomat 3B | 2002 - Falterbaum | 20000TD | Premix system; capacity 22,000 L/h | 2000

Year of construction: 2018, condition: used, A washing machine for cleaning glass bottles prior to beverage filling. The soiled empty bottles are loaded into bottle baskets and pass through the system for approximately 14 minutes. First, the bottles pass through a pre-soaking bath and a lye bath in the lower section, and are then rinsed in the upper section with lye, twice with hot water, cold water and finally fresh water. The cleaned bottles are discharged onto the bottle conveyor above the bottle inlet. Additional title: single-ended machine for cleaning glass bottles Nominal capacity: 33000 Fl/h ; mechanical control range: 13.200 - 36.000 Fl/h Number of basket holders: 269 pcs. ; of which 259 were filled – total number of bottles: 7.770 pcs. Processing time: 14,14 min Heating / Cooling: 1.352.712 kJ/h Lhjdpszizyzjfx Amzen Water: 7,92 m3/h Formats: 0,5 l NRW bottles Material: housing from stainless steel Position: in a cabinet on legs with an enlarged surface area Base construction: sinle-ended machine Features: pre-soaking and lye baths; spray nozzles; bottle conveyor with drives; pumps; top surface serving as a work platform with guardrails; housing; control cabinet; touchscreen display serving as an HMI panel

Year of construction: 2007, condition: used, A single-ended machine for cleaning glass bottles, with labels removed via a chain. The cleaning solution is steam-heated. Additional title: Single-ended machine Capacity: 17000 bo/h Weight: 26400 kg Machine partitioning: chain division: 110 mm Ljdpfx Amozg I Efjzehn Operation / Control: Simatic S7

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 7,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 420 mm, feed length W-axis: 900 mm, spindle diameter: 130 mm, table load: 15,000 kg, table length: 2,000 mm, table width: 1,800 mm, Union GERA BFP 130 CNC milling machine with Heidenhain 355 control, mechanically refurbished in 2019, in excellent condition, including base plates. Travel in X-axis: 7,000 mm Travel in Y-axis: 2,500 mm Travel in Z-axis: 420 mm Table load capacity: 15,000 kg Spindle diameter: 130 mm Lhedoz Ahqyjpfx Amzon Table length: 2,000 mm Table width: 1,800 mm Travel of W-axis: 900 mm

Condition: good (used), Year of construction: 1985, functionality: fully functional, Spindle diameter: 110 mm Maximum spindle speed: 1400 rpm Table surface: 2000 x 1600 mm Lsdpfe Abinhsx Amzshn Control system: Siemens Sinumerik System 8

Condition: new, functionality: fully functional, Year of construction: 2025, Charger Condition: New Technical Condition: New Description: If you have any further questions, please feel free to call us. In addition to this model, we have approximately 150 other industrial trucks in stock. Visit our website fleischmann-foerdertechnik. We are happy to inquire about leasing and financing, as well as delivery at favorable rates. Part-exchange of Linde equipment is also possible – even without purchasing a unit from us. Reported operating hours were read as of the date listed. Subject to prior sale, changes, and errors. Ledpfewg Ilusx Amzjhn

Condition: used, Controller: Heidenhain TNC 355 X-axis (table longitudinal) mm: 2.780 Y-axis (headstock vertical) mm: 2.425 Z-axis (column) mm: 2.310 B-axis (rotary table): degrees 360° Tool holder / taper: SK 50 (ISO 50) • Heidenhain TNC 355 CNC control • 360° NC rotary table (B axis) • Approx. 40 SK 50 tool holders included, partly fitted with tools • Siemens SIMODRIVE drive package Lhedpfx Amezxwyijzjn

Condition: new, functionality: fully functional, Charger Lhedpfxjywplwo Amzon Condition: New Technical Condition: New Description: If you have any further questions, please feel free to call us. In addition to this model, we have approximately 150 other industrial trucks in stock. Visit our website fleischmann-foerdertechnik. We are happy to inquire about leasing and financing, as well as delivery at favorable rates. Part-exchange of Linde equipment is also possible – even without purchasing a unit from us. Reported operating hours were read as of the date listed. Subject to prior sale, changes, and errors.

Condition: new, functionality: fully functional, Charger Condition: New device Technical Condition: New Lhodpfoywpl Rox Amzjn Description: High-frequency charger If you have any further questions, please feel free to call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our website fleischmann-foerdertechnik. We are happy to assist you with leasing, financing, as well as low-cost delivery options. We can also accept Linde devices in trade-in – even if you do not purchase a unit from us. The operating hours displayed were recorded at the time of listing. Subject to prior sale, modifications, and errors.

Condition: new, functionality: fully functional, Charger Condition: New device Lhodpfsywpmnjx Amzen Technical condition: New Description: High-frequency charger available in the following capacities: 24V 50A, 24V 40A, 24V 30A, 24V 20A, 24V 15A, 24V 10A. If you have any further questions, please feel free to contact us. In addition to this model, we have approximately 150 other industrial trucks in stock. Visit our homepage at fleischmann-foerdertechnik. We are happy to assist you with leasing & financing as well as delivery at favorable rates. Trade-in of Linde equipment is also possible—even if you do not purchase a device from us. Recorded operating hours were read at the time of listing. Subject to prior sale, modifications, and errors.

Condition: new, functionality: fully functional, Charger Ledpfx Ameywpkyezehn Condition: New Technical Condition: New Description: If you have any further questions, please feel free to call us. In addition to this model, we have approximately 150 other industrial trucks in stock. Visit our website fleischmann-foerdertechnik. We are happy to inquire about leasing and financing, as well as delivery at favorable rates. Part-exchange of Linde equipment is also possible – even without purchasing a unit from us. Reported operating hours were read as of the date listed. Subject to prior sale, changes, and errors.

Condition: new, functionality: fully functional, Charger Condition: New Technical Condition: New Lhodpsywpk Tofx Amzsn Description: If you have any further questions, please feel free to call us. In addition to this model, we have approximately 150 other industrial trucks in stock. Visit our website fleischmann-foerdertechnik. We are happy to inquire about leasing and financing, as well as delivery at favorable rates. Part-exchange of Linde equipment is also possible – even without purchasing a unit from us. Reported operating hours were read as of the date listed. Subject to prior sale, changes, and errors.

Condition: new, functionality: fully functional, Charger Condition: New Technical Condition: New Description: If you have any further questions, please feel free to call us. In addition to this model, we have approximately 150 other industrial trucks in stock. Visit our website fleischmann-foerdertechnik. We are happy to inquire about leasing and financing, as well as delivery at favorable rates. Part-exchange of Linde equipment is also possible – even without purchasing a unit from us. Reported operating hours were read as of the date listed. Subject to prior sale, changes, and errors. Lodpfx Amoywpl Djzohn

Condition: new, functionality: fully functional, Charger Condition: New device Lsdpfxsywpmhe Amzjhn Technical condition: New Description: High-frequency charger available in the following capacities: 24V 40A, 24V 30A, 24V 20A, 24V 15A, 24V 10A. For further inquiries, please feel free to call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our website at fleischmann-foerdertechnik. We are happy to provide quotes for leasing & financing as well as delivery at competitive rates. Trade-ins of Linde equipment are also possible—even if you do not purchase a device from us. The operating hours indicated were recorded at the time of listing. Subject to prior sale, changes, and errors.

Condition: new, functionality: fully functional, Charger Condition: New device Technical condition: New Description: High-frequency charger. If you have any further questions, please feel free to call us. In addition to this model, we have around 150 other industrial trucks in stock. Please visit our website fleischmann-foerdertechnik. We are happy to offer leasing & financing options as well as delivery at favorable terms upon request. We also accept Linde equipment as trade-in – even if you do not purchase a device from us. Indicated operating hours were read at the time of listing. Lhjdpoywpmujfx Amzen Subject to prior sale, modifications, and errors.

Condition: new, functionality: fully functional, Charger Condition: New Technical Condition: New Lsdpeywpktjfx Amzjhn Description: If you have any further questions, please feel free to call us. In addition to this model, we have approximately 150 other industrial trucks in stock. Visit our website fleischmann-foerdertechnik. We are happy to inquire about leasing and financing, as well as delivery at favorable rates. Part-exchange of Linde equipment is also possible – even without purchasing a unit from us. Reported operating hours were read as of the date listed. Subject to prior sale, changes, and errors.

Condition: new, functionality: fully functional, Charger Condition: New Technical Condition: New Description: If you have any further questions, please feel free to call us. In addition to this model, we have approximately 150 other industrial trucks in stock. Visit our website fleischmann-foerdertechnik. We are happy to inquire about leasing and financing, as well as delivery at favorable rates. Part-exchange of Linde equipment is also possible – even without purchasing a unit from us. Reported operating hours were read as of the date listed. Subject to prior sale, changes, and errors. Ledpfoywpk Hex Amzehn