Used Harrow Combination for sale (4,355)

Condition: used, Levelling bar Spring tines Standard point, interchangeable hydr. folding / double crumbler roller mech. depth adjustment Lighting Cat II / III Hitch / Ibsdpfx Aett Dacscpoc

Condition: used, Year of construction: 2022, Goosefoot coulter with overlap / flat bar crumbler 2x D270 / crosskill roller D400 with drawbar / one set of carriers for track eradicators / two cutter/planer / transport chassis 400/60 - / 15.5 / lower link connection Cat3 / front and rear lighting / expert opinion Ibsdpfxjrxutke Acpec

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Ibedpfx Acjz D Ihfopsc

Condition: good (used), Year of construction: 1987, For sale is a used Felder BF5-41 4-in-1 combination machine with a cutting length of 1200 mm. The machine has been inspected and refurbished by our service team. Technical data: - Cutting length 1200 mm - Cutting height 95 mm - Max. saw blade diameter 300 mm - 3 milling speeds - Planer width 410 mm - 4-knife cutterblock - 3 motors, each 3 kW / 4.1 hp - Year of manufacture 1987 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Ibjdpfx Ajz Symkocpec Related terms: combination machine, multi-function machine, planer, thicknesser, circular saw Reference: R-E28JC

Condition: good (used), Year of construction: 1996, For sale is a used Felder BF6-41X 4-in-1 combination machine with a cutting length of 2800 mm. The machine has been inspected and refurbished by our service team. Technical specifications: - Cutting length 2800 mm - Cutting height 103 mm - Max. saw blade diameter 315 mm - 3 milling speeds Ibedjz Sylgopfx Acpjc - Planer width 410 mm - 4-knife cutterblock - 3 motors, each with 3 kW / 4.1 HP - Year of manufacture 1996 - Includes feeding device The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Combination machine, combined machine, planer, thicknesser, thicknessing machine, circular saw Reference: R-D0975

Condition: good (used), Year of construction: 1999, For sale is a used Hammer C3-31 Trend 4-in-1 combination machine with a cutting length of 1250 mm. The machine has been inspected and refurbished by our service team. Technical data: - Cutting length 1250 mm - Cutting height 103 mm - 3 milling speeds - 3 system cutterhead shafts - Planing width 310 mm Ijdpfx Acoz Sthuopjbc - Max. passage height 230 mm - 3 motors, each 3 kW / 4.1 hp - Year of manufacture 1999 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: combination machine, combined machine, planer, thicknesser, thicknessing machine, circular saw Reference: R-J0001

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Ibedpfxjz Hngmo Acpsc Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Condition: used, Year of construction: 1990, operating hours: 2,946 h, power: 115 kW (156.36 HP), Equipment: air conditioning, cabin, INTERNAL VEHICLE NUMBER: M662 ----CLAAS DOMINATOR 88 SL ----HOURS: 2,946 ----YEAR OF MANUFACTURE: 1990 ENGINE: PERKINS 6-CYLINDER WITH TURBO (4-STROKE DIRECT INJECTION) WATER-COOLED MAXIMUM SPEED: APPROX. 25 KM/H CUTTING UNIT: 3.90 METERS RAPS TABLE THRESHING DRUM WIDTH: 1300 MM THRESHING DRUM DIAMETER: 450 MM STEPLESSLY ADJUSTABLE FAN FOR CLEANING FUEL TANK PIPE: HYDRAULICALLY SWIVELING TIRES NEW NUMBER OF SHAKERS: 5 SHAKERS HYDRAULIC DRIVE GRAIN TANK CAPACITY: 4600 L STRAW SPREADER TRANSPORT LENGTH: 10 METERS TRANSPORT HEIGHT: 3.85 METERS UNLADEN WEIGHT: APPROX. 8500 KG HEATING AIR CONDITIONING (COMPRESSOR MISSING) 3D LEVELING SYSTEM HYDROSTATIC TRANSMISSION WITHOUT CUTTING UNIT WAGON THE HEADER DRIVE HAS BEEN COMPLETELY OVERHAULED NEW BASKET NEW BELT NEW BLADE Contact us directly via WhatsApp: Why Autohaus Mat GmbH? 1. Attractive trade-in: We handle the process quickly and fairly. With our trade-in bonus, you maximize the value of your vehicle and benefit when purchasing a new model. 2. Individual financing solutions: Would you like to finance your new vehicle? We offer customized financing solutions tailored to your needs: with or without a down payment * Flexible terms * Top conditions 3. Personal customer service: Our experienced team will support you from the initial consultation to vehicle handover. 4. Our additional services: In addition to vehicle purchase, we offer exclusive services for a smooth process: Worldwide vehicle sales: Support with purchase and export, wherever you are. Transfer registration plates: Provision of export or short-term registration plates for transport. Customs clearance: We take care of all formalities for export abroad. Delivery of your vehicle: Safe and timely delivery directly to you. Important: All offers are subject to availability. The vehicle description serves as a guide; only the information in the purchase contract or order confirmation is legally binding. For vehicles with VAT, net sales for export are generally possible if all required documents are available. Net sales within the EU are now only conducted with VAT deposit and proof of registration in the destination country (Confirmation of Arrival), provided that all necessary documents are present. For our export customers, we offer the following services: Export license plates for up to 30 days * Short-term license plates (5 days) * Preparation of the export declaration Ijdpfx Acjz Sdvwspebc Contact us directly via WhatsApp: Staff on-site during opening hours. Please call in advance to make a reservation. We look forward to your call Your team from Autohaus MAT in Waibstadt

Year of construction: 2008, condition: used, functionality: fully functional, This is a combination steamer, also known as a convection oven, manufactured by Convotherm, model OGS 20.20, in a gas-powered version, direct injection, without a boiler, manufactured in 2008. The unit is set for natural gas; it can be converted to propane gas. The combination steamer is functional; videos can be sent upon request. The combination steamer is equipped with a trolley for 20 x 2/1 GN or 40 x 1/1 GN pans and includes 2 x 1/1 GN insert racks. The unit is sold without inspection or warranty, as received from the customer. An inspection will certainly be necessary for recommissioning. Wiring diagrams and documentation are included. Only frozen, ready-made meals have been heated/regenerated in this combination steamer. You will receive an invoice with VAT shown. Our used equipment service for you: High-quality branded equipment at fair prices Professional overhaul/inspection & expert cleaning Checked & fully functional Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating manuals, connection diagrams & spare parts Inspection according to DGUV V3 Technical data: W x D x H: approx. 1232 x 1055 x 1952 mm Power connection: V: 400 / kW: 2.2 Gas connection: kW: 70.0 Insert slots: 20 x 2/1 GN or 40 x 1/1 GN Weight: approx. 403 kg Year of manufacture: 2008 Condition: Used, no inspection Additional information: ACS Advanced Closed System (automatic energy-saving system, optimal humidity in the cooking chamber) Crisp & tasty (multi-stage cooking chamber dehumidification in ACS) Press & Go (image symbol) for quick selection of predefined cooking recipes Tray Timer (staggered loading) Start time pre-selection in real-time mode Night baking Delta-T baking (requires multi-point core temperature probe) Cook & Hold Programmable with 250 cooking recipes, each with up to 20 steps CONVOTHERM cookbook with pre-programmed cooking recipes Disappearing door: more space and improved workplace safety Ijdpfxoz Smhis Acpsbc Double-glazed door with integrated door stop Antibacterial door handle latch with ventilation position and safety function Door handle latch with closing function Motor brake when opening the cooking chamber door: less steam escaping Fan with autoreverse function Handheld spray with stepless adjustment Multi-point core temperature probe Height-adjustable device feet Easy operation via menus/icons Bright graphic display Digital rocker switch for easy adjustment of temperature, time and core temperature Modular processor control with clear display and module self-check RS232 interface Storage of all device settings and cooking recipes in an additional memory module Permanent self-diagnosis for fault detection System with full-text error description Safety program mode: operation of the device with limited functionality is possible Basic prison version Robust design in stainless steel Seamless welded cooking chamber Rounded cooking chamber corners Suction plate easily removable Hygienic socket seal Cooking chamber lighting with shock-resistant glass cover Including loading trolley with condensate collection tray

Condition: excellent (used), Catalog number: 8125 TECHNICAL DATA PLANER: - roller width 410mm - 3-knife roller - adjustable angle guide - table length 1800mm - both tables adjustable JOINTER: - max thickness of workpiece on the jointer 180mm - guard on the jointer roller – from above: - pawls - infeed roller, toothed - planing roller - outfeed roller, smooth – with horizontal drilling machine: - max tool diameter 16mm - max hole depth 120mm - max milling length 200mm - front/rear adjustment with drilling unit - table adjustment up/down and sideways - adjustable roller in the lower table - 2 feed speed options 8/12m/min - main motor 4kW CIRCULAR SAW: - max blade diameter 350mm - max cutting height (for a 300mm blade) 45mm - blade arbor diameter 30mm - blade adjustable up/down - cutting width with guide 350mm - cutting width on the carriage 500mm - table dimensions 1230x530mm - with carriage + miter gauge - blade guard Ijdpfx Acjz Rpl Topebc - motor power 3kW MILLING MACHINE: - spindle 30mm - spindle adjustable up/down - spindle height 80mm - guide - rotation right/left - dust extraction nozzle diameter 120mm - dimensions L/W/H 2800x2300x1050mm - weight approximately 1000kg FEATURES – with drilling machine – guard on the jointer roller – very good condition, used machine Net price: 16900 PLN Net price: 3930 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Format panel saw, milling machine, combination machine, table saw, circular saw, joiner’s circular saw, format saw, panel saw, table milling machine, tilting spindle milling machine FELDER Type: KF7 Year of manufacture: 1996 Format sliding table 300 cm Ibedpfez Eft Iex Acpjc Manual height adjustment of the saw blade Manual tilting of the saw blade up to 45° Parallel fence with fine adjustment up to approx. 125 cm Extension table with telescopic extension arm Rip fence extendable up to approx. 320 cm, adjustable for miter cuts with degree scale system Parallelogram protective device with upper extraction hood Motor power saw motor 3 KW Tilting spindle milling machine Manual height adjustment of the tilting spindle Manual tilting of the milling spindle up to 45° backwards Milling spindle diameter 30 mm 3 speeds adjustable via belt Milling spindle can be lowered and removed under the table Motor power milling unit 3 KW Milling fence with fine adjustment Folding device for feed A prior inspection is highly recommended; simply leave your phone number in an email, and I will contact you to arrange an inspection appointment. Subject to prior sale. All information without guarantee. The machines can be picked up by the buyer or shipped via a freight forwarder at the buyer's expense. Loading or packaging can be organized by us. The shipping costs are an estimate; they may vary depending on the distance and unloading options; please inquire. The offered item is offered with differential taxation. The stated selling price is the gross final price. An invoice with VAT breakdown will not be issued. You will receive an invoice in accordance with §25 UStG. Warranty basis: Due to age and wear, the sale is exclusively to commercial customers without any warranty, guarantee, or right of return. All information without guarantee. The buyer acknowledges this by submitting their bid. If the offered item is a used item, the warranty period is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered item is a new item, the warranty period is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, the warranty period is 12 months.

Condition: good (used), Year of construction: 2008, Working width: 250 cm Roller: Cage roller Ø 440 mm Iodpfx Acjz Rgicopebc Working depth: Up to approximately 26–28 cm, depending on the model and roller adjustment. (10 rotors with 2 tines each). More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: used, Year of construction: 2019, overall weight: 1,047 kg, Combined Surfacing and Thicknessing Planer Manufacturer: SCM GROUP spa Model: SCM Type: L Invincible FS7 Year of Manufacture: 2019 Weight: 1,047 kg Usable Working Width: 520 mm Total Table Length: 2310 mm Cutterhead Diameter: 120 mm Planerhead Speed: 5000 rpm 4 Knives: 35 x 3 x 520 mm Aluminum Surfacing Fence: 1200 x 190 mm Surfacing Fence Angle Adjustment: from 90° to -45° Min./max. Planing Height: 3 / 250 mm Feed Rate (Thicknessing): 5 - 8 - 12 - 18 m/min Dust Extraction Port Diameter (Surfacing): 120 mm Dust Extraction Port Diameter (Thicknessing): 120 mm Ijdpfsz Iqqkox Acpobc Purchase Price (Net): €15,000 plus applicable VAT. VAT will be shown separately on our invoice. Note: The equipment text or equipment description is taken from the original purchase invoice and has not been checked for accuracy or completeness. Deviations are possible! Financing possible Upon request, we can arrange suitable financing through our company. Please feel free to contact us. Subject to changes, errors and prior sale. Sale is made without guarantee or warranty and only to commercial customers. Inquiries will be processed from Monday to Friday between 8 a.m. and 4 p.m.

Condition: used, Year of construction: 1997, operating hours: 500 h, functionality: fully functional, machine/vehicle number: Typ 250 R.B.S.EH, total width: 1,300 mm, total length: 3,200 mm, total height: 1,400 mm, trimming length: 2,960 mm, overall weight: 2,500 kg, table length: 25,002,920 mm, table width: 920 mm, table height: 900 mm, STEKO 250 master press, long belt grinder, veneer saw Cutting length 2970. Press 2500 x 1100, 920 for push-through operation Grinding table 2500 x 930 Ijdsz Ecfhspfx Acpsbc Includes existing grinding belts.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: SO-22949/1/19, REF: MM6218 1 X Sparc Systems 8-lane linear weighing combination system. Technical specification⚙️ ✅ Manufacturer - Sparc Systems Ltd. ✅ Model - LCWS. ✅ Overall dimensions - 1620mm long x 920mm wide x 1620mm high. Note 🗒️ Seller has a quote for service and getting production-ready at cost of £12-15k per unit. Iedpsxd Thmjfx Acpebc

Condition: like new (used), Year of construction: 2008, functionality: fully functional, planing width: 530 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 4,800 rpm, total length of planing tables: 2,300 mm, total width: 1,000 mm, total height: 920 mm, overall weight: 750 kg, Equipment: CE marking, KNAPP AD 530 SUPER Planer-Thicknesser | 530 mm | TERSA Shaft | Electric Table Lift | Year 2008, Planer-Jointer! Professional KNAPP AD 530 planer-thicknesser, manufactured in Austria. This is a high-class industrial machine designed for intensive use in woodworking shops, furniture production, and the manufacture of window and door frames. The AD 530 model stands out with its robust construction, 530 mm working width, long cast iron tables, and a modern TERSA shaft, enabling quick knife changes without adjustment. An additional advantage is the electric table lift on the thicknesser, which provides convenient and very precise adjustment of the working height. Key advantages: - Austrian KNAPP production - Year of manufacture: 2008 - Working width: 530 mm - TERSA MONOBLOCK planing shaft with 4 knives - Quick knife change without adjustment - Electric thicknesser table lift - Automatic opening of the planer tables - Long cast iron work tables - Robust construction with a weight of 750 kg - Industrial quality construction TECHNICAL PARAMETERS: - Manufacturer: KNAPP Produktion GmbH - Model: AD 530 SUPER - Year of manufacture: 2008 - Country of manufacture: Austria - Working width: 530 mm - Length of planer tables: 2300 mm - Shaft diameter: 120 mm - Shaft type: TERSA MONOBLOCK - Number of knives: 4 - TERSA knife dimensions: 530 × 35 × 3 mm - Shaft speed: 4800 rpm - Maximum planing height: 250 mm - Minimum planing height: 3 mm - Maximum material removal: 8 mm - Feed speeds: 7 / 11 / 15 / 19 m/min - Tilting fence 90°–45° - Thicknesser table dimensions: 530 × 930 mm - Motor power: 5.5 kW - Power supply: 400 V - Machine weight: 750 kg - Machine dimensions: 2300 × 920 × 1000 mm Equipment: - TERSA MONOBLOCK shaft with 4 knives - Automatic opening of the planer tables - Electric thicknesser table lift Application: The machine is perfect for: - furniture production, - carpentry, - companies producing stairs, - production of windows and doors, - processing of solid wood, - professional woodworking workshops. The machine is in very good technical condition. A solid construction ensures high operational smoothness, great cutting accuracy, and years of trouble-free operation. PRICE VAT MARGIN BRUTTO OR VAT23% INVOICE Ibodpfxezxxqve Acpsc WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: good (used), Year of construction: 2002, For sale is a used Holzprofi circular saw and milling machine with a cutting length of 2500 mm. The machine has been inspected and refurbished by our service team and is in good condition. Technical specifications: Ibjdpfez Apgiex Acpjc - Cutting length 2500 mm - Cutting width 1200 mm - Cutting height 90 mm - 3 milling speeds - Height-adjustable + swiveling - Dust extraction port Ø 100/80 mm - 2 motors, each 4.4 kW / 6 HP - Year of manufacture 2002 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: circular saw, milling machine, combination machine Reference: R-J047R

Condition: used, Year of construction: 2005, - Year of manufacture of the NH cutterbar: 2005 - Year of manufacture of the Biso header: 2007 - 20 ft. - Hydraulic reel drive Ijdjz Na D Ajpfx Acpsbc - Biso CX 100 rape cutterbar attachment with 2 electric side knives

Condition: excellent (used), Year of construction: 1999, operating hours: 650 h, functionality: fully functional, power: 4 kW (5.44 HP), Well-maintained, lightly used, powerful professional machine with 5 combined functions. Numerous accessories included. Features a circular saw and table router with sliding table, jointer and thickness planer, as well as a mortise drilling unit. 360 V Ijdpfezn I Aajx Acpjbc The machine is available for sale immediately. It is located in a ground-level basement in 23858 Reinfeld. Transportation is the responsibility of the buyer.

Condition: good (used), Year of construction: 1999, power: 5.5 kW (7.48 HP), Equipment: CE marking, For sale is a robust and precise jointer and thicknesser from the German quality manufacturer Panhans. Iedpfxezz Nk Es Acpsbc The machine is equipped with a Centrofix cutterblock. This quick-change system – similar to the Tersa cutterblock – allows for easy cutter replacement without time-consuming adjustment of the cutter knives. Technical data and features: +Manufacturer: Panhans +Type: AD 440/445-B +Year of manufacture: 1999 +Planing width: 630 mm +Motor power: 5.5 kW +Operating voltage: 400 V +Total length of the jointer tables: approx. 2,300 mm +Centrofix cutterblock +Cutterblock speed: approx. 5,000 rpm +Digital display for planing thickness +Electromotive adjustment of the thickness table with the push of a button +Two rollers in the thickness table +Automatic workpiece feed +Two feed speeds +Massive, finely planed cast iron tables +Folding jointer tables +Swiveling fence up to 45° +Dust extraction connection +Motor brake +CE version The robust Panhans construction ensures smooth operation and clean planing results. The digital display, the electric thickness table adjustment, and the Centrofix cutterblock allow the machine to be operated comfortably, quickly, and precisely. Ideally suited for professional use in carpentry shops, joineries, and woodworking shops. The machine can be demonstrated under power by prior arrangement. Shipping via freight forwarder is possible. You will receive an invoice with VAT shown. Price: €13,685 including VAT - €11,500 net Subject to prior sale and errors in the technical data.

Condition: used, Bäuerle KFL Milling and Drilling Machine The robust Bäuerle KFL combined woodworking machine combines a panel saw, a long-hole drilling machine and a table milling machine with feed in a single unit, and comes with a comprehensive range of accessories. Technical data: - Motors: 2 - Length: approx. 320 cm - Width: approx. 140 cm - Height: approx. 160 cm Isdpfjztvywsx Acpsbc - Table: swivelling - Technical details: on request

Condition: used, Combination jointer-planer machine Manufacturer: SCM LINVINCIBLE Type: 2200 Planing width: 50 cm Feed height: 20 cm 3-knife cutterhead 2 feed speeds Adjustable jointer fence Adjustable sliding rollers in the planer table Ijdpfez Ef Ifjx Acpjbc Condition: see images, or refer to the item description. Parts can also be picked up on site. All dimensions are approximate. All information is provided to the best of our knowledge but without warranty. Subject to prior sale. Shipping costs are an estimate; they may vary depending on the distance and unloading possibilities. The items can be picked up on site or shipped at the buyer's expense. The stated selling price is a net amount plus VAT. An invoice with VAT breakdown is included with the goods. Warranty basis: Due to wear and tear on used parts, the items are generally sold as defective – for spare parts – only to commercial businesses. By submitting his bid, the buyer accepts this as the basis of the purchase contract. If the offered item is a used item, the warranty is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered items are new, the warranty is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, the warranty is 12 months.

Condition: used, Year of construction: 2002, operating hours: 3,560 h, power: 206 kW (280.08 HP), maximum speed: 20 km/h, front tire size: 650/75 R 32, rear tire size: 16.0/70-20, Equipment: air conditioning, cabin, - 6.09 m cutting table with T-carriage and 6.09 m cutting table with T-carriage and rapeseed table (2 cutting tables) - 6-cylinder turbo engine, 281 hp - Patented compressed air cooling system - Hydrostatic drive - 4-speed gearbox - Differential lock - AutoFloat system - Hydraulic reversing mechanism - 4-drum threshing system, 60 cm diameter - Info-View monitor - Chopper - 3rd lifting cylinder - Rapeseed table with 2 electric side knives - Long, foldable extensions Ibodjz N Iz Djpfx Acpec - Front rotating beacon - Power socket - Threshing angle sensors

Condition: used, Year of construction: 2023, operating hours: 250 h, power: 400 kW (543.85 HP), maximum speed: 30 km/h, front tire size: TW IF 710/70 R42, rear tire size: SW VF 520/80 R26, Equipment: air conditioning, cabin, onboard computer, Engine: - FPT Cursor 13 engine - Tier V emission stage - Hi-eSCR2 technology - 12900 cm³ displacement - 6 cylinders - Turbocharger - Intercooler - Common rail injection - Rated power: 365 kW at 2100 rpm - Max. power: 400 kW at 2000 rpm - Self-cleaning and pivoting radiator rotary screen - Fuel tank 1300 l - AdBlue tank 130 l - Rotary screen brush Drive and axles: - Hydrostatic drive - 2-speed gearbox with electronic gear preselection - Overload protection - Parking brake - Wet multi-disc brakes – electro-hydraulic differential lock - Adjustable rear axle - 30 km/h at reduced engine speed Feeder: - Automatic feed pressure control and cutting height adjustment of the cutter bar - Inclination and angle adjustment of the cutter bar - AutoFloat system - Hydraulic quick coupler for cutter bar - Hydraulic reel drive - Hydraulic engagement of cutter bar/reel and feeder - Dynamic feed roll (450 mm diameter, 1100 rpm, reducible to 640 rpm, 8 bars) Cutter bar: - 760 CG, 10.70 m Varifeed: Bolted short crop dividers - Scraper strips on the feeder - Lower scraper strips - Reel - Reel speed sensor - Header lifters - Left and right rape seed separation knives - Kit for rape seed separation knives - Rear wall extension - Knife position sensor - Replacement knives - Knife guard - Knife bar 3" fine - Knife drive - 57.5 cm adjustment range - Spare wheel - Guide wheels Threshing and separation: - 2 longitudinal rotors - Counter-rotating for threshing and separation - 2.64 m rotor length; 0.559 m diameter - Engine speed with 2 speed ranges: 331 - 697 or 668-1407 rpm - Electrically adjustable from the cab - 1 threshing basket per rotor with 18 basket bars - 123° wrapping angle - Electrically adjustable - 2 separating baskets per rotor - 1 finger basket - 148° wrapping angle - Discharge drum: 4 bars - 1.57 m wide, 0.40 m diameter - Speed 800 rpm - Separating basket - wrapping angle 54° - Total threshing and separation area 3.06 m² - Adjustable guide plates in the rotor covers for controlled material flow - Twin Pitch PLUS rotors Cleaning: - OptiClean cleaning system - Increased cascade stages - Counter-rotating pre-cleaning floor and upper sieve - Electrically adjustable vane sieves - Total sieve area 6.50 m² - 2 separate re-threshers - Electronic monitoring - Automatic slope compensation up to 17% of the pre-cleaning floor Isdpfx Acsz Na H Depobc - Cleaning fan and sieve box - Cleaning fan with two fan outlets - Speed adjustable from 200 to 1100 rpm - Access to the pre-cleaning floor through large service openings on both sides of the machine Grain elevator & grain tank: - 12,500 l grain tank volume - 126 l/s unloading rate - 6.4 m unloading spout - Grain tank with 2 level indicators - Grain tank lighting - Grain sample extraction - Adjustable work lights on the unloading spout Straw and chaff distribution: - 6-row straw chopper and hydraulically driven chaff spreader - Tool-free change from straw laying to chopping operation - DualChop chopping bar - Active straw distribution OptiSpread plus - Adjustable working width - Distribution and throw direction (in case of side wind) Driver's seat: - Adjustable comfort seat with air suspension - Partial leather seat with additional comfort features - Passenger seat - 3-way adjustable steering column, automatic climate control - Refrigerator with adjustable temperature - Multifunction lever: Direction of travel and travel speed - Raise/lower cutter bar - Inclination adjustment - Reel

Condition: used, Year of construction: 2010, - Corn header attachment - Approximately 3,000 [units/pieces/etc.] - Flange drive - Protective tarpaulins - Parking supports Ijdpfxoz Nbcye Acpobc - Auxiliary chassis