Used Helmut Rink Gmbh Pk 1100 Rwt for sale (72,054)

Year of construction: 2026, condition: new, Instantaneous water heater with tubular heat exchanger directly in the boiler water * Low space requirement and low weight * Energy savings of up to 10%! * low maintenance * easy to clean * Optimum price/performance ratio * Optionally with oil or gas burner Ljdet Hfyaspfx Aiqehl Technical data: * Boiler output 80 kW * Hourly output up to 1,100 liters (10-78 °C) * Dimensions (H/W/D) approx. 160 x 110 x 160 cm * Unladen weight approx. 280 kg ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Year of construction: 2026, condition: new, Instantaneous water heater with tubular heat exchanger directly in the boiler water Lhsdpet Hfygofx Aiqol * Low space requirement and low weight * Energy savings of up to 10%! * low maintenance * easy to clean * Optimum price/performance ratio * Optionally with oil or gas burner Technical data: * Boiler output 100 kW * Hourly output up to 1,350 liters (10-78 °C) * Dimensions (H/W/D) approx. 160 x 110 x 160 cm * Empty weight approx. 320 kg ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Year of construction: 2026, condition: new, Instantaneous water heater with tubular heat exchanger directly in the boiler water * Low space requirement and low weight * Energy savings of up to 10%! * low maintenance * easy to clean * Optimum price/performance ratio * Optionally with oil or gas burner Technical data: * Boiler output 40 kW * Hourly output up to 550 liters (10-78 °C) * Dimensions (H/W/D) approx. 140 x 100 x 115 cm * Empty weight approx. 190 kg ##### Lhjdpfx Ast Eui Ioiqsl RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Year of construction: 2026, condition: new, Instantaneous water heater with tubular heat exchanger directly in the boiler water * Low space requirement and low weight * Energy savings of up to 10%! * low maintenance * easy to clean * Optimum price/performance ratio * Optionally with oil or gas burner Technical data: * Boiler output 60 kW * Hourly output up to 850 liters (10-78 °C) * Dimensions (H/W/D) approx. 160 x 110 x 140 cm Ljdpfx Aist Hfx Aeqshl * Empty weight approx. 230 kg ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Year of construction: 2026, condition: new, A modular system that you can easily adapt to your needs: * Mechanical or electric grinder * Packing press or basket press * Fruit presses in various sizes: 5 - 70 liters All home cideries offer: * Highest juice yield through hydraulics * Ergonomic and hygienic operation * Compact unit with mobile frame RINK - home cideries - :according to your needs: * The Standard home cider makers include a manual fruit grinder and enable an hourly output of up to approx. 70 liters. Ledpfx Aeuady Djiqjhl * The Super home cider mills include a RINK scraper mill and enable an hourly output of up to approx. 150 liters.

Year of construction: 2026, condition: new, Coaxial tubular heat exchanger for connection to an existing heating system / heat source * Coaxial tubular heat exchanger (KRWT) with thermal insulation * Automatic low temperature protection * Stainless steel juice pump * Chassis Advantages: * Low maintenance * Suitable for media containing turbid matter * Simple, quick cleaning * Durable thanks to the use of high-quality and robust components Optional: Mixing unit incl. circulation pump for a stable inlet temperature of the heating water Lhodst Uzhcjpfx Aiqsl ##### RINK - Pasteurizing systems for more than 30 years Proven technology - more than 500 units in customer use

Condition: new, Year of construction: 2026, EF 600-NG bag-in-box dosing machine - for filling fruit juices, wine, vinegar, oil, etc. * High-quality stainless steel housing * Clear display with important information (current flow rate, remaining quantity, etc.) * preset quantities 1.5, 3, 5, 10, 20 liters * freely adjustable quantities Ljdpfjt U Iiyox Aiqohl * Cleaning program * Extensive statistics * Only short downtime due to double holder * Compact design

Condition: new, Year of construction: 2026, Container 150 l thermally insulated with 13.5 kW /400 V heating with automatic temperature switch-off, rack, bag-in-box filling device with bag holder * simple, safe, optimum price-performance ratio * no temperature fluctuations * absolutely gentle heating due to large heating surface of 0.4 m² * with thermostat: switches off when temperature is reached * Height-adjustable stainless steel frame - the container runs completely empty "Free time" during the heating time approx. 40 min. for 150 ltr. Hourly output approx. 150 ltr. also available with 18 kW /400 V heating - hourly output 180 ltr. 2-digit bottle filling available Lodpfxjt U H Nrs Aiqehl You do not have a 400V connection? Container pasteurizer is also available with gas condensing boiler. ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Year of construction: 2026, condition: new, Continuous pasteurizer electric - up to 400 ltr./h * Water bath boiler * Electric heating 13.5 / 18 / 27 / 31.5 kW - 400 V * Container (stainless steel) 150 ltr. with thermal insulation * Stainless steel tubular heat exchanger * Automatic low temperature safety device (compressed air required) * Stainless steel juice pump * Chassis with holder for low temperature safety device and pump Lhjdpfx Aot Uzitoiqel ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Year of construction: 2026, condition: new, Continuous pasteurizer electric with preheating of the juice in the coaxial tube heat exchanger They use available low-cost energy (e.g. from solar, heat pump, biogas, tec.) although the temperature level is not sufficient for pasteurization. The rest of the temperature increase to pasteurization level is done electrically (with less energy requirement). Lhodpfsuadm Dox Aiqol The components: Preheating: * Coaxial tubular heat exchanger (KRWT) with thermal insulation (max. 60kW) thermal * Mixing unit incl. circulation pump ensures a stable inlet temperature of the heating water Continuous pasteurizer electric: * Electric heater 13.5 / 18 / 27 / 31.5 kW - 400 V * Tank (stainless steel) 150 ltr. with thermal insulation with stainless steel tubular heat exchanger * Automatic low temperature safety device (compressed air required) * Stainless steel juice pump Pasteurizer mounted on chassis Simple operation Total capacity up to 1100 liters per hour ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Condition: good (used), Year of construction: 2013, operating hours: 13,140 h, functionality: fully functional, Model: BS1100PBD – 1100 mm working width. Maximum material thickness: up to 160 mm. Belt length: approx. 1900 mm. Feed speeds: 4.5 m/min and 9 m/min. Motor: approx. 20 HP (≈15 kW) with automatic star-delta starting. Configuration: single head roller/pad – single roller head arrangement. Frame: robust construction (double frame) for improved material support. Several technical conveniences: electric height adjustment of the worktable with fine micro-regulation, pneumatic braking system for rapid roller stop. Lhedpfx Ajxx T T Seiqsl

Condition: ready for operation (used), Year of construction: 2001, functionality: limited functionality, For sale is a Fischercope H100C XYp micro-/nano-hardness testing system by Helmut Fischer (year of manufacture: 2001). The device was last used in a laboratory, but is currently not fully functional and is therefore expressly sold as defective / for repair or as a source of spare parts. Known issues: - Table advance movement does not function correctly (the table is positioned under the measuring head, not under the microscope – precise measurement is currently not possible). Likely an electronic issue. - The measuring table moves independently to the left – possibly a joystick failure. - Indenter change does not work correctly (the probe does not move fully to the end stop). Therefore, the device is particularly suitable for: • Repair by individuals with electronics expertise • Sourcing of spare parts Lhsdpfx Asyu Nabsiqol • Research / hobbyists The optical condition is good for its age.

Condition: new, Year of construction: 2002, MKF Motorized Adjustable Spreader Beam Adjustable spreader beams are used when attachment points and load centers of gravity vary. Features & Highlights: Central suspension point: Solid triangular lifting eye for the crane hook. Electric center-of-gravity adjustment: Electric motor drive (connection via 230V CEE plug) to balance uneven loads directly at the push of a button. Ergonomic control panel: Height-adjustable control unit mounted on a vertical rail guide with a drag chain (energy chain) to protect the cables. Clear controls: Controls for locking pins (Open / Closed / Invalid Position) and center-of-gravity adjustment (incl. LED indicator for the center position), plus a central emergency stop switch. Includes transport frame: Robust, mobile base frame made of square steel tubing for safe and compliant storage. Technical Data Manufacturer: MKF Helmut Möschl GmbH Load capacity: 9,000 kg Dead weight: 550 kg Year of manufacture: 11/2002 Serial number: R 6906 Type: 743 4954 13 Beam dimensions: 1920 x 400 mm Frame dimensions: 2670 x 1250 x 1880 mm Original price: €10,700 "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Ledpfx Aiozwmcksqehl Find more items—new and used—in our shop! International shipping costs available upon request!

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 620, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Note: The machine is located on the first floor. The main difference between the MTRent MTcut v60 and the MTRent MTcut v60D lies in the inclusion of an additional rotary axis ("D" stands for rotary table or integrated 4th axis for extended machining capabilities). TECHNICAL DETAILS Travel in X-axis: 600 mm Travel in Y-axis: 420 mm Travel in Z-axis: 450 mm Distance from spindle nose to table: 120–570 mm Spindle speed range: 60 – 12,000 rpm Torque: 70 Nm (S6, 40 %) Spindle power: 11 kW (40 %) Spindle cooling: Oil/Air Tool interface: SK40 Pull stud: DIN 69871/72 Table dimensions: 750 × 420 mm Number of T-slots: 5 T-slot width: 14 mm H8 T-slot spacing: 65 mm Rapid traverse X/Y/Z: 32 Feed rate: 1 – 12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool positions: 30 Tool change time: 1.5 s Maximum tool weight: 6 kg Maximum tool diameter: 76 mm Maximum tool length: 250 mm MACHINE DETAILS Control system: Heidenhain iTNC 620 Central lubrication: R68 (ISO 68) Hydraulic oil: R32 (ISO 32) Compressed air connection: 3/8" Compressed air: 6–8 bar Power supply: 400 V Fuse rating: 63 A Connected power: 25 kVA Coolant tank: 160 l Linear guides X/Y/Z: 30/35/35 mm Machine bed: Meehanite casting Machine weight: 4,000 kg EQUIPMENT Rotary table or integrated 4th axis Heidenhain iTNC 620 CNC control Digital Heidenhain drive technology Ceramic-bearing precision spindle Separate spindle cooling for constant temperature Ljdpfx Aozzlhasiqehl Integrated chip conveyor Maintenance-free Siemens spindle motor THK linear guides in all three axes 30-position tool changer with dual gripper Central lubrication Large access door to the work area Loading option from above using an overhead crane Two waterproof work area lights CE certification • The height and weight of the asset must be considered when selecting the transport vehicle. • A forklift is available for loading. • If the item is not collected on time, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. • The sale is made without any warranty or guarantee. • The information on the technical specifications comes from the original offer. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the item on site before the end of the auction.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 1261, total width: 8,500 mm, total length: 24,000 mm, total height: 3,650 mm, No minimum price – guaranteed sale to the highest bidder! Two complete filling/packaging lines are for sale, consisting of the following: 2 x B&C (Bertoncello & Cecchin, Italy) pouch filling machines CV 80 DN, manufactured in 1997 2 x Latz palletizers LHP 1800 (new Siemens S7 control system in 2025) 1 x Latz stretch wrapper The lines include various roller conveyors. The machines will be dismantled in week 38. Ledpfx Aezzn I Asiqshl TECHNICAL DETAILS Possible sack volumes: 10, 15, 20, 45, 50, or 70 liters MACHINE DETAILS Connection power: approx. 38 kW Overall width: 8,500 mm Overall length: 24,000 mm Overall height: 3,650 mm EQUIPMENT Defect removal belts Roller conveyors Latz stretch wrapper

Condition: like new (used), functionality: fully functional, machine/vehicle number: ST 1005-8/2 1/1, Year of construction: 2021, lifting height: 8,000 mm, chain length: 9,000 mm, load capacity: 500 kg, lifting speed: 133 mm/s, fine lifting speed: 33 mm/s, type of input current: three-phase, The overhead crane is in like-new condition and has been used very little. The chain is well-maintained and greased. Manufactured and calculated by Ralf Brinkmann GmbH. Transport within Switzerland and export can be arranged; the buyer bears the costs. Technical data: Load capacity: max. 500 kg Runway type: IPE runway beam Runway length (fixed): 12,000 mm Runway length (movable): approx. 9,595 m of which 4,615 mm (extending from the building) System consisting of: 12.00 m IPE runway beam for attachment to the existing concrete ceiling (2 pieces of 6,000 mm each with connecting elements) - Mounting plate on top - 9.59 m IPE runway beam, for movement on the "ceiling rail". intended for attachment via the following travel units. Additionally, it has two counter-pressure rollers, at the rear. Eyelet for attaching the hand trolley to be able to retract the telescopic rail, at the rear end of the telescopic rail. 2x hand travel unit for manual movement of the telescopic rail 4x set of end stops (stoppers) designed as bolted angles 2x C-rail system / cable management system for supplying power to the electric chain hoist / electric travel unit (no ideal control!) 1x hand trolley, for retracting the telescopic rail. 1x STAHL Crane Systems electric chain hoist ST 1005-8/2 1/1 Manufactured according to the rules of the EC Machine Directive, Device Safety Act, and BGV. Lifting mechanism operating mode according to DIN EN 13001-2: HD1 Motor classification (FEM/ISO): M4 Load-bearing component classification (FEM/ISO): M5 Protection type EN 60529: IP55 Designed for operation in an indoor environment, ambient temperature -20 to +40°C Lifting mechanism load capacity 500 kg Lifting height 8.00 m Lifting speed 2.00 / 8.00 m/min Power (nominal) 0.20 / 0.80 kW Design data, see product information / motor data sheet Duty cycle 20 / 40 % Load chain galvanized Travel unit electric travel unit, short overall height Travel speed 5.0 / 20.0 m/min Power 0.07 / 0.32 kW Duty cycle 20 / 40 % Flange width 200 mm Electrical system Contactor control Operating voltage 400 V Control voltage 48 V System frequency 50 Hz Control unit STH incl. 6.80 m control cable Paint finish Hoist - Topcoat polyurethane 80 µm Topcoat lifting mechanism in RAL 7021 color, black gray Topcoat control box and fan cover in color RAL 6018, yellow-green Note: Overload protection and emergency lowering by slip clutch (must not be operated under normal conditions) Equipment - Travel switch on both sides - Lifting end switch for upper hook position Lsdjzn H Twspfx Aiqehl - Guide for cable-mounted power supply, 505 mm - Radio remote control with emergency control unit STH (transmitter Quadrix, receiver FSE308 with integrated horn (91 dB) and signal light, charger, replacement battery, belt clip, adhesive symbols) Documentation: - Installation declaration according to Directive 2006/42/EC for machinery - Test book - Load capacity labeling according to UVV standards - Operating manual for cranes Currently, the crane is disassembled and stored in a hall in Switzerland, near the German border.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 620, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Note: The machine is located on the first floor. TECHNICAL DETAILS Travel range X-axis: 600 mm Travel range Y-axis: 420 mm Travel range Z-axis: 450 mm Distance spindle nose – table: 120–570 mm Speed range: 60 – 12,000 rpm Torque: 70 Nm (S6, 40 %) Spindle power: 11 kW (40 %) Spindle cooling: Oil/air Tool holder: SK40 Pull stud: DIN 69871/72 Table dimensions: 750 × 420 mm Number of T-slots: 5 T-slot width: 14 mm H8 T-slot spacing: 65 mm Rapid traverse X/Y/Z: 32 Feed rate: 1 – 12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool positions: 30 Tool change time: 1.5 s Maximum tool weight: 6 kg Maximum tool diameter: 76 mm Maximum tool length: 250 mm MACHINE DETAILS Control system: Heidenhain iTNC 620 Central lubrication: R68 (ISO 68) Hydraulic oil: R32 (ISO 32) Compressed air connection: 3/8" Compressed air: 6–8 bar Power supply: 400 V Fuse rating: 63 A Connected power: 25 kVA Coolant tank: 160 l Linear guides X/Y/Z: 30/35/35 mm Machine bed: Meehanite casting Machine weight: 4,000 kg EQUIPMENT Heidenhain iTNC 620 CNC control system Digital Heidenhain drive technology Ceramic-bearing precision spindle Separate spindle cooling for constant temperature Integrated chip conveyor Maintenance-free Siemens spindle motor THK linear guides in all three axes 30-position tool changer with double gripper Lhsdpfx Aiszzlh Hoqsl Central lubrication Large access door to the work area Loading possible from above using an overhead crane Two waterproof work area lights CE certification The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and day started will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data comes from the original offer. No liability is assumed for printing and measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, workpiece length (max.): 3,048 mm, workpiece width (max.): 1,524 mm, sheet thickness (max.): 3 mm, table load: 5,000 kg, No minimum price – guaranteed sale to the highest bidder! The machine’s control system and software have been renewed! TECHNICAL DETAILS Sheet thickness for circuit boards with a tensile strength of 400 N/mm² max.: 3.5 mm Sheet thickness min.: 0.5 mm Punch head force max.: 4 presses with max. force of 7 t & 4 presses with max. force of 26 t Force of the lower cylinder max.: 6 t Double-punch punching force: 12 t (2 hydraulic punches) Length of the input sheet min.: 370 mm Length of the input sheet max.: 3,048 mm Width of the input sheet min.: 300 mm Width of the input sheet max.: 1,524 mm Ljdpfx Ajzzkt Usiqehl Diagonal of the input sheet max.: 3,408 mm Length of the output sheet min.: 250 mm Length of the output sheet max.: 3,048 mm Width of the output sheet min.: 60 mm Width of the output sheet max.: 1,524 mm Vertical travel of the scissor lift table: 550 mm Usable load capacity of the scissor lift table: 5,000 kg Dimensions of the transportable stack of sheets min.: 300 x 100 mm MACHINE DETAILS Electrical data Voltage: 380 V Frequency: 50 Hz Current: 119 A Rated power: 61 kW Cooling capacity of the unit: 32.2 kW EQUIPMENT Scissor lift table TC27155C Motorized roller bed PRL3814F Universal destacking device DUF15 Punch head H2 Oil-dynamic hydraulic unit C1515 (3-part pump unit) Lower cylinder EI09 Double rotating punch P2R36 Water-air cooling unit R121 Refrigerant R407C Software RIO Control and management system MMACHNT-MICROMach Processor PENTIUM INTEL II 400 Mhz WINDOWS NT Documentation The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and for each day or part thereof will be charged. The fee must be paid before collection. The sale is made with the exclusion of any guarantee or warranty. The information on the technical data comes from the original offer. No liability is accepted for typing or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, operating hours: 15,396 h, pressing force: 173 t, stroke length: 500 mm, overall weight: 16,000 kg, working length: 4,250 mm, Equipment: CE marking, full service history, No minimum price – guaranteed sale to the highest bidder! TRUMPF TruBend 5170 including BendMaster! The machine has been continuously serviced and maintained by Trumpf, with a complete service record. The cylinders are leak-proof and have no oil loss. The tools shown for the robot are included. TECHNICAL DETAILS Stroke: 500 mm Press force: 1,700 kN Working length: 4,250 mm Tool clamping: Hydraulic, top and bottom Number of axes: 6 Load capacity: 60 kg Lhjdpfx Ajzzkvceiqel MACHINE DETAILS Voltage: 3 x 400 V Rated current: 41.0 A Frequency: 50 Hz Connected power: 28.0 kVA Control voltage: 24 V DC Follow-up time: max. 90 ms Follow-up distance at 220 mm/s: max. 10 mm Follow-up distance at 160 mm/s: max. 8.5 mm Operating pressure: max. 300 bar Weight: 16,000 kg Operating hours Press beam running time: 15,396 h Hydraulic system running time: 83,212 h Machine operating hours: 152,638 h EQUIPMENT CE marking Documentation/Manual Rear stop with sensors CNC crowning Bendmaster (robot with 8 m travel) Vacuum manipulators CNC gripping station Double sheet detection BendGuard laser safety device Spare parts: Cable carrier, spare vacuum plate, BWF fixators (machine feet) The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If collection is not completed within the specified timeframe, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data comes from the original offer. No guarantee is given for typographical or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on-site before the end of the auction.

Condition: like new (used), Year of construction: 2016, operating hours: 500 h, functionality: fully functional, spindle speed (max.): 24,000 rpm, Gravograph IS 6000 IQ – CNC engraving machine – approx. 500 operating hours For sale is a very well-maintained Gravograph IS 6000 IQ with only approx. 500 operating hours. The machine is suitable for engraving and milling operations, for example, for the production of signs, lettering, and customized engravings. Machine data: Manufacturer: Gravograph / Gravotech Model: IS 6000 IQ Year of manufacture: 05/2016 Operating hours: approx. 500 Condition: used, very well maintained Equipment: Engraving software GS8-GRAPHIC incl. dongle Stable machine table with T-slots for workpiece clamping Matching base frame Wired handheld control unit Extraction device on the machining head Spray device 750-W HF spindle kit for the IQ series, according to the order confirmation from November 2017 The machine was purchased in December 2016. It is worth noting the excellent condition and the low usage with only approx. 500 operating hours. Price: net 14,500 EUR Location: 09627 Bobritzsch-Hilbersdorf Ljdpfxoz D Htge Aiqshl Availability: immediately If you are interested, we look forward to receiving your inquiry.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 8,255 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 700 kg, table width: 500 mm, table length: 575 mm, For sale is a machine island consisting of two wire EDM machines, ZK Genius 700, with the corresponding Chameleon Quad automation system! The entire system is in very good used condition. The system consists of the following components: 1x ZK Genius 700, year of manufacture 2015, with 22,056 operating hours 1x ZK Genius 700, year of manufacture 2019, with 8,255 operating hours 1x Chameleon Quad, year of manufacture 2015 TECHNICAL DETAILS Wire EDM machines Zimmer & Kreim Genius 700 Travel in X-axis: 400 mm Travel in Y-axis: 350 mm Travel in Z-axis: 350 mm Table size: 575 × 500 mm Maximum workpiece weight: 700 kg Axes: Controlled C-axis and rotating spindle Processing modules: C-module for hard metal, PCD or etching processing Processing modules: O-module for very fine surface roughness Software: CIMCO Editor for path erosion Automation Chameleon Quad Electrode positions: 176 UPC pallet positions: 9 Loading system: Loading drawer MACHINE DETAILS Wire EDM machine 1 Manufacturer / Model: Zimmer & Kreim Genius 700 Year of manufacture: 2015 Operating hours: 22,056 h Wire EDM machine 2 Manufacturer / Model: Zimmer & Kreim Genius 700 Year of manufacture: 2019 Operating hours: 8,255 h Automation Manufacturer / Model: Chameleon Quad Year of manufacture: 2015 EQUIPMENT CO₂ fire extinguishing system from Kraft & Bauer Lhsdpfx Aiezy Hn Eoqol Extraction system Double rotary gripper for Erowa ITS Single gripper for UPC pallets Loading drawer for UPC pallets

Year of construction: 2003, condition: used, Technical details: Lhsdpeu N Afgjfx Aiqel operating pressure: 10 bar voltage: 400/50 V/Hz control voltage: 24 V total power requirement: 0,76 kw weight of the machine approx.: 160 kg dimensions L x W x H: 0,58x0,68x1,35 m heat exchanger application area: transportation of heat energy from a medium to another medium (liquid or gas) connections 3/4" for flow/return 2x both sides 2 Pieces available *

Condition: used, Year of construction: 2020, functionality: fully functional, type of input current: three-phase, warranty duration: 6 months, input voltage: 400 V, Equipment: documentation/manual, We offer this used Alfred Gruber GmbH bottle filling machine, model ARFD 6/11, complete with rinser and RingBull Off capping system, manufactured in 2020. Manufacturer: Alfred Gruber GmbH Type: Bottle filling machine ARFD 6/11 Year of manufacture: 2020 Manufacturing number: 2020044 Order number: 5728 Capacity: 1100 bottles/h Capacity per bottle: 0.33 l Rated current: 16 A Rated voltage: 3×400 V/N/PE Frequency: 50 Hz 1 unit: Fully automatic bottle rinser integrated into the system Linear electro-pneumatic bottle rinser with 2x6 spray nozzles suitable for bottles Suitable for cylindrical bottles: Height: 170-300 mm Diameter: ø 58-90 mm 1 unit: Water filter system for bottle rinser 1.0μ and 0.45μ filters with housing 1 unit: Automatic bottle filling and 5-liter can filling machine with IDM, 6-position - Fully automatic filling process - Container maximum ø90mm, height 320 mm - Semi-automatic filling process - Container maximum ø175mm, height 350mm - Semi-automatic filling process for 2.0l siphon bottles with handle and 5.0l party keg cans (only every second station can be used) Lhsdpfxezlymfe Aiqol Capacity: 1,100-1,200 bottles/h (0.3l bottle) 1,000 bottles/h (0.5l bottle) 700 bottles/h (1.0l bottle) 1 unit: Spray tunnel For washing away beer residue from the containers 1 unit: Rotary table – infeed 1 unit: Fully automatic ring pull-off capping system integrated into the system Optional conversion to crown cap ø26 with sorting bowl at an extra cost of Euro 25,000 instead of the Ring Bull Off 1 unit: Conveyor belts Completely serviced and maintained, including a 6-month warranty and electrical components.

Condition: used, Maximum pressing force: 3,150 kN Stroke rate: 15-80 strokes/min Ram adjustment: 10 mm Stroke: 200 mm Voltage: 400 V Motor power: 30 kW Ljdpfozwf Tnsx Aiqshl Connected load (total power): 65 kW Weight: approx. 17,000 kg Two-hand safety distance: 198 ms

Year of construction: 1992, condition: used, functionality: fully functional, machine/vehicle number: 029.700, Painting/drying booth from Luft- und Trockentechnik GmbH, type KSP 6-BT, manufactured in 1992. The system is suitable for painting and drying workpieces and features an integrated exhaust/extraction system. Technical data: Manufacturer: Luft- und Trockentechnik GmbH Type: KSP 6-BT Year of manufacture: 1992 Manufacturer's number: 029.700 Usable volume: approx. 72 m³ Lhsdpfxoz D Evyo Aiqol Total volume: approx. 81 m³ Minimum exhaust air volume flow: 1,440 m³/h Maximum permissible oven temperature: 90 °C Maximum solvent quantity: 4,302 g/oven load The painting booth has dimensions of 6 x 4 meters. The system includes an exhaust duct with extraction via the roof. In addition, a suspension/transport system is located in the ceiling area, to which workpieces or painting racks can be attached and moved through the work area. Dismantling will be carried out by the buyer.