Used Hera Hss Iii / 3100 X 2,0 for sale (61,260)

Condition: used, Year of construction: 1978, sheet width 3100 mm plate thickness 2 mm rear stop 1000 mm cutting angle 1°06 ° no. of strokes 45 Hub/min total power requirement 3,0 kW dimensions of the machine ca. 3600 x 2200 x 1600 mm weight 4500 kg Equipment: - Electric motorized backgauge - With digital ELGO position display - Manual cutting gap adjustment - 1x side stop with mm scale Hedpfx Ameuagxpogen - 2x support arms - 1x freely movable double foot switch - Front finger guard Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: used, Year of construction: 1981, sheet width 2600 mm plate thickness 5 mm rear stop 1000 mm cutting angle 1°06 ° no. of strokes 45 Hub/min voltage 380 V / 50 Hz total power requirement 5,5 kW weight 4500 kg dimensions of the machine ca. 3600 x 2200 x 1600 mm Equipment: • elektric-motoric back stop • manual die clearance Hsdpfxexuv Hyj Amgsn • 2 x lay-on arms • Foot switch • Knives as replacement

Condition: used, Max. cutting length: 3100 mm Max. sheet thickness: 6 mm at 490 N/mm² Motorized backgauge with digital display Manual cutting gap adjustment Cutting length variably adjustable Cutting edge lighting Hjdpfx Aew I Tu Nemgjn New knives

Condition: used, Hydr. swing cut guillotine shears HERA type HSS III No. 598 Year of manufacture 1986 Cutting length 3100 mm Cutting thickness 3 mm Stand projection 200 mm Blade strokes 25 strokes/min. Mains connection 380 Volt, 50 Hz Motor power 3 kW - Motorized adjustable backgauge 1070 mm - Actual value digital display for the backgauge - Cutting gap adjustment - Cutting length adjustment Hjdjq A I Upepfx Amgjn - Front side stop left 1000 mm - 4 sheet metal support arms 1000 mm - el. foot switch Space requirement without sheet support arms L x W x H 3630 x 2200 x 1600 mm Weight approx. 4000 kg good condition

Year of construction: 1988, condition: used, sheet width 1500 mm plate thickness 3 mm Hedolp U Txepfx Amgjn weight of the machine ca. 4 t dimensions of the machine ca. BxTxH 2000x1500x1800 mm

Condition: good (used), functionality: fully functional, Year of construction: 1998, Motorized Swivel Bending Machine Manufacturer: HERA, Type: SM4-30/6 Year of Manufacture: 1998 Technical Data Manufacturer: HERA Type: SM 4 Year of Manufacture: 1998 Capacity: 3020 x 6 mm Upper beam opening: 450 mm! Lower beam adjustment: 80 mm Working height: 900 mm Motor power, upper beam drive: 5.5 kW Motor power, bending beam drive: 11 kW Dimensions: approx. L 4.40 x W 1.60 (2.75 with rear stop) x H 1.85 m Weight: approx. 9 t Equipment: • Motorized bending beam adjustment for sheet thickness setting Hedsy U U Ixepfx Amgjn • Hydraulic upper tool clamping! • 2 bending rails, approx. 15 mm + 50 mm • 1 sharp rail • Goose foot tool, approx. 220 mm high, split • CNC-controlled rear stop • CNC control, Siemens S7 All information is without guarantee. An inspection under power is possible at any time in our showroom.

Condition: new, Technical Data for the Shelf Panel: Shelving System: Meta Type: Clip Scope of delivery includes: 01x Shelf panel, used Shelf designation: MS150-III Material finish: Sendzimir galvanized Dimensions: 1,000 x 500 x 40 mm Weight: 3.41 kg/piece Maximum load per shelf: 150 kg, with evenly distributed load. 04x Shelf support brackets 40 mm, used, galvanized silver, suitable for steel shelves with 40 mm upturned edge Finish: Zn blue + therm 4h, galvanized Color: Silver Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is required, additional costs will apply. These can be requested individually depending on the delivery location and scope of delivery. Hodpfxjy H Hkpo Amgsn

Condition: used, Technical data for the shelf panel: Shelving system: Meta Type: Clip Included in delivery: 01x Shelf panel, used Panel designation: MS150-III Material finish: Sendzimir galvanized Dimensions: 1,000 x 600 x 40 mm Weight: 3.93 kg|pc. Max. load per shelf panel: 150 kg with evenly distributed load Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information on the item: Hsdpfeyk T E Tjx Amgjn This item is only available for collection. If transportation or shipping of this item is required, additional costs will apply. These costs can be queried separately with us depending on the delivery location and the scope of delivery.

Condition: new, Technical data for shelf panel: Shelving system: Meta Type: Clip Scope of delivery: 01x shelf panel, used Panel designation: MS150-III Material colour: Sendzimir galvanized Dimensions: 1,300 x 600 x 40 mm Weight: 5.11 kg/unit Maximum load per shelf panel: 150 kg with evenly distributed load Hodpeyk R Rmjfx Amgsn Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is required, additional costs will apply. These can be requested from us individually, depending on delivery location and scope.

Condition: used, Year of construction: 2000, sheet width 3020 mm Hsdpfx Amjyk Dicsgsn plate thickness 5 mm distance between columns 3020 mm Control Simatec OP7 stroke 450 mm back stop - adjustable 1000 mm work height max. 900 mm total power requirement 22 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 4200 x 1600/2900 x 2000 mm Features: - Motorized backstop, 1000 mm - Motorized upper crossbar adjustment - Motorized lower crossbar adjustment - Side protection - Foot switch - Operating instructions

Condition: used, Year of construction: 2002, sheet thickness: 13sheet length: 3060motor: 30Stroke/min: 12messurements (LxWxH): 4000 x 2300 x 2600weight approx.: 11900Baykal 3100x13 cutting machine– Year of Manufacture 2002 This high-performance guillotine shear stands out with its robust construction and excellent cutting precision. Its substantial weight ensures stable, low-vibration operation, making it ideal for demanding industrial applications. Technical Specifications: Year of Manufacture: 2002 Cutting Capacity (St 42): 13 mm Hjdey D U Dfspfx Amgjn Cutting Length: 3060 mm Main Motor Power: 30 kW Main Voltage: 380 V / 50 Hz / 3 Phase System Pressure: 260 bar Dimensions & Weight: Width: 2300 mm Lenght: 4000 mm Height: 2600 mm Weight: 11,900 kg The machine is currently under power and available for inspection and testing at any time.

Condition: used, Z-conveyor, conveyor belt with metal slat belt GÖSSLING Metal belt conveyor, belt conveyor, stationary conveyor Machine No.: 15867 Year of manufacture: 2005 Usable length: 3100 mm Belt width: 400 mm Frame profile height: 70 mm Insertion width: 465 mm Lower insertion length: approx. 1500 mm Conveyor incline length: approx. 800 mm Upper discharge belt length: approx. 600 mm Height offset: approx. 170 mm Belt speed: approx. 22 m/min. Conveying height - discharge height: approx. 1220 to 1390 mm Insertion height: approx. 1050 to 1270 mm Hodpfewvv Rwox Amgon Belt drive motor output: approx. 0.37 kW Power supply: 400 Volt, 50 Hz - Metal slat chain made of stainless steel - Belt drive via NORD gear motor - Robust sheet steel construction - Height adjustable via hydraulic lift in the base - Mobile on fixed castors Required floor space L x W x H: 3160 x 750 x ... mm Weight: 420 kg Good condition

Condition: used, Belt Conveyor, Belt Conveyor System, MFP Conveyor Technology Machine No.: 17565 Year of Manufacture: 2018 Usable length: 3100 mm Belt width: 600 mm Belt length: approx. 6400 mm Frame profile height: 35 mm Deflection roller diameter: 20 mm Hodpfjwrihnsx Amgsn Belt speed: 10 m/min to 45 m/min Conveyor height: approx. 1120 mm Motor power: 140 Watts Power supply: 230 Volt, 50 Hz - Infinitely variable belt speed via potentiometer on ROFRE frequency inverter, type 897 - Reversible operation (right/left running) - Belt drive via INTERROLL drum motor - Stable sheet steel construction with closed steel plate under the conveyor belt - 1 piece height adjustable subframe HAACON with hand crank, conveyor height approx. 950 to 1150 mm - HAACON subframe mounted on steel plate, length 750 mm x width 500 mm x thickness 30 mm - 1 fixed support foot without height adjustment as transport support - Fully mobile on fixed castors Overall dimensions L x W x H: 3180 x 760 x 1150 mm Weight: 250 kg Good condition

Year of construction: 1978, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1978 Specifications Metric US Standard Rolling width 3050 mm Rolling thickness 3x toproll Ø 60 mm Rolling thickness 5x toproll Ø 70 mm Rolling thickness prebending 50 mm Top Roll Ø 630 mm Bottom Roll Ø Hsdpfokvm S Nox Amgjn 600 mm Side roll Ø 500 mm Number of rolls 4 Rolling speed 0 - 5 Adjustiment lower roll 200 mm/min. Adjustment side rolls 200 mm/min. Number of driven rolls 2 Power 120 kW Dimensions (Estimate) Length 5790 mm Width 4200 mm Height 4200 mm Weight 85000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1995, roller (top) diameter: 330 mm, sheet thickness (max.): 23 mm, Manufacturer: IMCAR Type: SIHR Year of manufacture: 1995 Extended end for profile bending rolls (Pipe & T-Angle) Central lubrication Hjdpewpku Djfx Amgen Digital readout position side rolls Fully hydraulic machine Hydraulic drop end Hardened rolls Specifications Metric US Standard Roll width: 3100 mm Sheet thickness at 3 x top roll Ø: 18 mm Sheet thickness at 5 x top roll Ø: 23 mm Sheet thickness for initial bending: 20 mm Top roll Ø: 330 mm Side roll Ø: 310 mm Number of rolls: 3 Bending speed: 0 - 5 Side roll adjustment: 200 mm/min. Number of driven rolls: 2 Power: 15 kW Dimensions (estimated) Length: 5250 mm Width: 1700 mm Height: 1700 mm Weight: 11900 kg Please note: The information on this page has been provided to the best of our knowledge, and wherever possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend you check all critical details.

Year of construction: 1980, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1980 Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø 130 mm Rolling thickness 5x toproll Ø 140 mm Rolling thickness prebending 120 mm Top Roll Ø 950 mm Bottom Roll Ø 850 mm Side roll Ø 180 mm Number of rolls 4 Rolling speed 2 + 4 Adjustiment lower roll 0 - 400 mm/min. Adjustment side rolls 0 - 400 mm/min. Number of driven rolls 2 Power Hodpjkvm Szofx Amgen 132 + 37 kW Dimensions (Estimate) Length 12000 mm Width 5440 mm Height 5650 mm Weight 286000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2010, travel distance X-axis: 14,000 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 35,000 m/min, rapid traverse Y-axis: 35,000 m/min, rapid traverse Z-axis: 35,000 m/min, spindle speed (max.): 5,000 rpm, rotational speed (max.): 5,000 rpm, total width: 5,000 mm, total height: 4,900 mm, total length: 22,000 mm, table length: 14,000 mm, table width: 2,000 mm, table load: 50,000 kg, FP model, ideal for a wide range of applications involving medium to large-sized components. Floor-type milling and boring machine - High dynamics with traverse speeds up to 35 m/min - INA linear guideway system - Hydro-mechanical clamping slides - Orthogonal milling head enables machining at any desired angle Technical data: - X-axis travel: 14,000 mm Hedjvn S E Nepfx Amgon - Y-axis travel: 2,600 mm - Z-axis travel: 1,500 mm - Table length: 14,000 mm - Table width: 2,000 mm - Table load capacity: 50,000 kg - Spindle power: 43 kW - Spindle speeds: up to 5,000 rpm - Spindle taper: ISO 50 / BT / MK - X-axis feed rate: 35,000 mm/min - Y-axis feed rate: 35,000 mm/min - Z-axis feed rate: 35,000 mm/min - Automatic orthogonal milling head positioning: 1° increments - Operating hours: 3,500 h - Machine length: 22,000 mm - Machine width: 5,000 mm - Machine height: 4,900 mm - Machine weight: 31,000 kg

Condition: used, mileage: 143,000 km, power: 220 kW (299.12 HP), first registration: 02/2020, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,480 mm, loading space width: 2,470 mm, loading space height: 2,010 mm, Equipment: ABS, air conditioning, tail-lift, We are very pleased that our offer has caught your interest and would already like to assure you that you can purchase a high-quality and competitively priced vehicle with a fully documented service history from our company! Certified sliding wall body BÄR tail lift, 2,000 kg capacity Tow coupling (pintle eye) Tow ball coupling Air conditioning German vehicle Registration / Customs Service We arrange vehicle registration and export documents / EUR 1 certificate and manufacturer’s declaration for export purposes. Financing On request, we are happy to provide you with a lease-purchase or financing offer. Service TÜV test (periodic inspection) / UVV LBW (tail lift safety test) / LGS inspection / Tachograph calibration and installation of OBU device as well as service by our authorized brand workshop before delivery. Toll / Road Charges Toll can be booked on site. Arrival / Distances Wittlich train station: 500 m Frankfurt Airport: 150 km Frankfurt-Hahn Airport: 40 km Hodpfxey R Ih Do Amgsn Luxembourg Airport: 75 km Sale in accordance with our General Terms and Conditions. The information provided online is a non-binding description and does not constitute guaranteed features. The seller is not liable for typographical or data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: good (used), functionality: fully functional, FOR SALE: Darley GS 3100 x 16 – Heavy-Duty Hydraulic Guillotine Shear Looking for a powerhouse for heavy plate shearing? Available is a high-quality hydraulic shear from the Dutch specialist Darley. This machine is built for demanding industrial environments and offers exceptional cutting capacity. TECHNICAL SPECIFICATIONS • Model: Darley GS 3100 x 16 • Year of Manufacture: 1989 • Max Cutting Length: 3100 mm • Max Plate Thickness: 16 mm (steel 450 N/mm²) • Cutting Angle: 2° • Motor Power: 22 kW • Machine Weight: Approx. 12,000 kg • Hydraulics: 400 L tank, 30 MPa max pressure • Voltage: 380 V KEY BENEFITS • High Capacity: A 16 mm cutting thickness over 3 meters is a rare and highly sought-after feature. • Stability: Hedpfxjy Rvdae Amgjn The 12-ton mass ensures vibration-free and precise cutting even under heavy loads. • Reliability: Darley machines are famous for their over-engineered structures, making them extremely durable for long-term industrial use. An excellent choice for workshops handling heavy plates and requiring absolute operational reliability.

Condition: excellent (used), Technical data: Year of construction: 2000; revision in 2023 Working length: 3100 mm column width: 2650 mm Hedpfer Idvpjx Amgjn Pressing force: 200 to CNC control: ESA S630, Windows Graphics 2D (new in 2023) Controlled axes: Y1 / Y2; X CNC table bending compensation: Wila Moducrown throat depth: 250 mm Stroke: 200 mm Motor power: 15 kW Dimensions (length x width x height): approx. 3600 x 2200 x 2900 mm Weight: approx. 12 tons The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear according to the age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2024, Manufacturer: ERMAKSAN Fibermark | Model: POWER-BEND FALCON 3100 X 220 | Serial number: 00033121-ERH | Year of manufacture: 2024 | Capacity: 3100 x 220 tons | Descent speed: 180 mm/s | DELEM DA-65T CNC control (touch panel); Bending length: 3100 mm; 18.5 kW power | Machine weight: 11,286 kg; Safety clearance: 8 mm | IP protection class: 54 | Control voltage: 422 V; Back gauge (X: 800 mm, R: 250 mm, ZI-22); Hydraulic tool clamping system; Roller-type drive unit; and much more. | Dimensions: approx. 2250 mm x 2700 mm x 5050 mm (W x H x L) | Approx. 11.29 kg | Color: Orange/Grey | Structure: Steel | Working area: 220 | The given dimensions are approximate values. All other information without guarantee. Hedpfx Amsy N Dnksgsn

Condition: used, Year of construction: 2000, Control system retrofit 2026: CybTouch 15 Windows Hjdpswn Ebvjfx Amgen Press force 100 t Bending length 3100 mm Stroke 215 mm Safety distance 350 mm Frame width 3250 mm Compressed air max. 8 bar Closing speed 200 mm/s Pressing speed 1-10 mm/sec Total power requirement 7.5 kW Machine weight approx. 8,000 kg Dimensions L-W-H 3450x2000x2800 mm

Condition: good (used), End mill, end mill, cutter, shell cutter Hedpsy A Ehfjfx Amgen -Manufacturer: Fette, end mill with longitudinal groove, 2 pieces -Type: Fette 75 x 75H Sp 880 HSS -Hole: Ø 27 mm -Cutting material: HSS -Price/Fee: complete -Transport dimensions: 155/75/H75 mm -Weight: 3.3 kg

Condition: used, Year of construction: 1998, sheet width 3060 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3100 mm down holder 16 Stück no. of strokes max. 10 - 15 Hub/min oil volume 160 ltr. cutting angle 1.6 ° back stop - adjustable 6.0 - 750 mm Control ELGO P9521 total power requirement 18.5 kW weight 6300 kg range L-W-H 3900 x 2300 x 1630 mm Features: - Robust electro-hydraulic swing beam shear - ELGO digital display model P9521, for electric backgauge * Backgauge travel X = 750 mm * Backgauge-free ball screw drive * Travel speed 100 mm/s - 1x stable side stop * With T-slot, flip-stop, and millimeter scale - 2x stable front support arms Hodpfx Amjyq Szmogjn - Electric cutting length limiter * Cutting length limiter to increase the stroke rate/min. - Manual cutting gap adjustment * Centrally operated on the right side stand - Front support plates - Front finger/interference guard - Inching operation with push buttons on the left control panel - Protective grille = safety device behind the machine - Operating instructions

Condition: used, Year of construction: 2008, sheet width 3100 mm plate thickness 6 mm rear stop 1000 mm cutting angle 1,2 ° down holder 14 Stk no. of strokes 18 Hub/min oil volume 150 l total power requirement 11 kW dimensions of the machine ca. 3900 x 1900 x 1600 mm Hedsvuz Tpspfx Amgsn weight 5500 kg Equipment: - Hydraulic swing cut shears - ELGO control system - Electric backgauge 1000 mm - Manual cutting gap adjustment - Cutting length limitation - Ball rollers in the table - 2x front support arms - 1x front side stop with scale - Front finger guard, hinged - Rear safety device (protective grille + light barrier) - Foot switch - Operating instructions