Used Holz-Her Sprint 1312 for sale (7,351)

Condition: used, Year of construction: 2006, Used machine Year of manufacture: 2006 Condition: completely overhauled Equipment and technical data: Nwsdewka H Sepfx Akuog - fitted with new glue application system - manually adjustable infeed fence - milling unit 1961 - edge feeder 1903 - glue application station 1906 with tracking nozzle - pressure unit 1816, pneumatic - end trimming unit 1822 - milling unit 1942 M for radius, chamfer, flush trimming - complete air nozzle - scraper unit 1929 - chip collection box - surface scraper 1964 - extraction hood set - complete safety covers - total length: 5,291 mm - workpiece thickness: min. 6 / max. 50 mm - edge band thickness depending on configuration: 0.4–5 mm - max. edge band height: 55 mm - minimum edge band strip length: 350 mm - max. edge band overhang/height per side: 3 mm - minimum workpiece width: 60 mm - minimum workpiece length: 180 mm - feed speed: 12.5 m/min - extraction: - jointing/milling unit: 900 m³/h - milling unit: 280 m³/h - scraper unit: 280 m³/h - static vacuum: - jointing/milling unit: 1,490 Pa - milling unit: 1,650 Pa - minimum air velocity: 20 m/sec - jointing/milling unit connection: 70 mm - scraper unit connection: 70 mm - compressed air: 6 bar Availability: short notice Location: Röllbach

Condition: used, Holz Her Sprint 1312 FÜ + PU Heavy-duty design – edge thickness 0.4 - 12 mm PLC screen control Pre-milling unit for application before the gluing section Fully automatic edge magazine for roll and strip material Glue application station for cartridges + PU bonding automatic tracing nozzle Workpiece height 6-55 mm End trimming unit for roll and strip material up to 12 mm edge thickness with adjustment from 0-10° angle of the trimming saws Milling unit, flush milling up to 12 mm, radius milling – bevel milling - 15° motorised - 4 axes Scraper unit for bevels and radii with 2 pneumatically operated scraper holders pneumatic infeed and outfeed Nwsdpfjx Eilqex Akueg Flat scraper unit – finishing Spray device – PU Machine in TOP CONDITION Available from stock Lieboch

Condition: used, Year of construction: 2020, machine/vehicle number: 462/2-003, Subscrisa, DDG INSOLVENCY I.P.U.R.L., cu sediul în Cluj-Napoca, str. Septimiu Albini, nr. 115, jud. Cluj, CIF RO27987796, nr. matricol: 2A0522, prin practician în insolvență Godorogea Daniel-Lucian în calitate de lichidator judiciar al societății ELEMENTO MOBILI S.R.L. - în faliment, in bankruptcy, en faillite, cu sediul social în mun. Dej, str. Dumbrava Roșie, nr. 6, et. parter, ap. 1, jud. Cluj, înregistrată la Registrul Comerțului de pe lângă Tribunalul Cluj, sub nr. J12/2389/2016, cod unic de înregistrare 36225390 desemnat în această calitate prin Încheierea Civilă nr. 1278 din data de 03.07.2025 pronunțată de Tribunalul Specializat Cluj în dosar nr. 442/1285/2025, organizează licitație publică cu strigare, cu preț în urcare, pentru vânzarea bunului identificat in prezentul anunt. Prima licitație va avea loc la data de 11.02.2026 la ora 15:00, la sediul DDG Insolvency I.P.U.R.L. din Cluj-Napoca, str. Septimiu Albini, nr. 115, jud. Cluj. În caz de neadjudecare licitația se repetă în data de 18.02.2026, 25.02.2026, 04.03.2026, 11.03.2026, 18.03.2026, în aceleași condiții și la aceeași oră. În vederea vizionării bunurilor, lichidatorul judiciar va stabili o zi de vizionare în data de 04.02.2026 între orele 10:00-14:00. Cei interesați de vizionare sunt invitați să contacteze lichidatorul judiciar și să își exprime intenția de participare, anterior datei stabilite. În caz de adjudecare, lichidatorul judiciar va emite factura fiscală pentru contravaloarea bunurilor adjudecate. Conversia prețului în lei se va realiza la data emiterii facturii fiscale, utilizând cursul de schimb stabilit de BNR pentru acea dată. Nwedpfxsyfg Dfo Akueg Pasul de licitație este de 5% din prețul de pornire. Caietul de sarcini în vederea participării la licitație va fi întocmit de către lichidatorul judiciar în concordanță cu uzanțele în materie, va conține regulamentul de participare la licitație și se va valorifica de către practicianul în insolvență, la prețul de la prețul de 500 lei+TVA pentru bunurile de până la 5.000 euro și de 1.000 lei+TVA. pentru bunurile de peste 5.000 euro. Acesta poate fi achiziționat de la sediul lichidatorului judiciar, sau telefonic urmând a fi transmis participantului prin e-mail. Garanția de participare la licitație va fi în cuantum de 10% din prețul de pornire. Aceasta împreună cu documentația de înscriere la licitație vor trebui depuse cu cel puțin 24 de ore anterior datei licitației la sediul lichidatorului judiciar. Garanția de participare la licitație va fi dedusă din prețul bunurilor pentru care participantul a fost declarat adjudecatar și va fi restituită persoanelor care nu au fost declarate adjudecatari. La preț egal, va fi declarat adjudecatar persoana care se va angaja să achite întregul preț în termenul cel mai scurt. Termenul de plată al prețului va fi de 5 zile lucrătoare de la momentul adjudecării. În cazul în care nu se va achita și restul de preț, adjudecatarul va pierde avansul achitat cu titlu de garanție și nu va mai putea participa la următoarele licitații care se vor organiza.

Condition: used, Year of construction: 2003, total height: 1,750 mm, total length: 6,000 mm, total width: 1,600 mm, Colour: Grey Weight: 3.000 kg - Year: 2003 - Documentation available: No - CE certificate present: No - Serial number: 470/0-303 - Number of units [pcs]: 7 Nsdsy Uxf Iepfx Akuswg - └ 1st unit type: Glue unit - - Tools available: Yes - └ 2nd unit type: Pressure rollers - └ 3rd unit type: Cap unit - - Tools available: Yes - └ 4th unit type: Rough milling unit - - Tools available: Yes - └ 5th unit type: Fine milling unit - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Tools available: Yes - └ 7th unit type: Flat scraping unit - - Tools available: Yes - └ 8th unit type: Flat scraping unit - - Tools available: Yes - Max. panel thickness [mm]: 50 - Min. panel width [mm]: 60 - Min. panel length [mm]: 180 - Min. feed speed [m/min]: 8 - Max. feed speed [m/min]: 20 - Voltage [V]: 400 - Transport dimensions: 6000mm x 1600mm x 1750mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), CATALOGUE NUMBER 8010 TECHNICAL DATA Equipment: - platen - pre-milling - strip feed system - 2 glue tanks: for granules and cartridges - hot melt adhesive (granules) currently in the machine - guillotine – preliminary trimming of the veneer - 3 pressure rollers - 2 trimming units with saws for final trimming Nsdpfx Aey Uvmvjkujwg - 2 milling units for edge profiling (radius cutters) - corner rounding unit - sanding units – for removing excess glue - polishing units - stepless feed speed adjustment 8-18 mm - workpiece thickness 6-45 mm - minimum workpiece length 180 mm - minimum workpiece width 600 mm - maximum veneer thickness fed from a roll 3 mm - air consumption 6-8 bar - extraction nozzle diameter 7x80 mm, 1x130 mm - dimensions L/W/H 6650x1260x1700 mm - weight 1850 kg ADVANTAGES - Made in Germany - Spray system - Pre-milling and corner rounding - 2 glue tanks - Includes 4 additional milling cutters - Unpainted - Original DTR + CE documentation - Very good condition - Used veneer edging machine Net price: 49900 PLN Net price: 11881 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: good (used), Year of construction: 2015, functionality: unexamined, Edge banding machine HOLZ-HER Sprint 1329 Premium - Year of manufacture: 2015 - Immediately available - Includes air cushion table - Cartridge system & granulate - Touchscreen - Jointing - Gluing: GlueJet system - Trimming (2 motors) Nwsdpfx Akey S Habeueg - Multifunction milling - Corner copying (2 motors) - Radius and surface scraping blades - Buffing

Condition: used, Year of construction: 2001, total height: 1,750 mm, total length: 5,650 mm, total width: 1,100 mm, Weight: 1.950 kg Price: On request - Year: 2001 - Documentation available: No - CE certificate present: No - Serial number: 468/0-103 - Transport dimensions: 5650mm x 1100mm x 1750mm (l x w x h) - Transport weight [kg]: 1950kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Nedpfxjxlqpds Akuswg Yorick Diebels

Condition: used, Edgebander Holzher Sprint 1317 pre-milling units glue application, glue cartridge pneumatic pre-cut guillotine pressure rollers trimming saws top-bottom milling units corner rounding Nwsdpfox Tf D Uex Akujg profile scraper flat scraper Max. edging height (mm): 50 Edge thickness from roll: 3 mm Feed speed: 10 m/min The machine requires servicing, adjustment, and calibration. It can be started and all units power on, but the front saw does not react to material and the corner rounding unit requires adjustment.

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Condition: Good (the machine has undergone extensive maintenance every year, most recently in March 2026!) Equipment: - iTronic – Adaptive pressure and glue quantity control with automatic, program-dependent fine adjustment - MOT SPS adjustable infeed fence - Automatic chain lubrication: Intelligent automatic transport chain lubrication - Edge Control 19 control system - EL GRM variable, 400V 50Hz, 2.2kW V2 SPRINT 1329 PERFORMANCE 400V 50Hz - Edge Control 19 control system with 18.5" touchscreen color display, 16:9 format - ECO MODE energy-saving mode: An automatic standby circuit - Jointing unit 1802 (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for jointing panel edges - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Edge feed 1901 SYNCHRO: automatic transport of coil and strip material - Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) - DW501 SPS motorized SPRINT - GM501 spray device after the printing unit with lubricant (recommended for high-gloss edges) - End trimming unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm) pneumatically tiltable 0/10° - Milling unit FR701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Air Stream System multi-cutter, diamond Ø 70.9 x 16 mm, Z = 2+2 - Form milling unit FF701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, left-hand rotation with CM technology - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, right-hand rotation with CM technology - Scraper unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the tracing rollers - HW reversible knives for scraper holder, R = 2.0 mm (2 pcs. required) - Flat scraper FK701 with pre- and post-sensing for removing adhesive residue - TR501 spray unit for infeed and outfeed (separating and cleaning agent) - Includes nesting shoes below with their own spray unit Nwedpfxey Hyl Ts Akueg Location: Hesse Availability: Approx. July 2026

Condition: used, Year of construction: 2021, functionality: fully functional, For Sale: Premium Holz-Her 1329 Multi Edgebander + Return-Master 5920 We are selling a high-end Holz-Her 1329 Multi edgebanding machine, including the Return-Master 5920 return system. The unit is 4 years old and in excellent condition. Original New Price: €138,000 + VAT Nedpsygrghefx Akuswg Our Price: €69,000 + VAT (50% savings) Why choose this machine? Get a premium, lightly used machine for the same price as a subsidized unit, but without the paperwork, bureaucracy, or long-term obligations of a grant application. Maintenance: Regularly serviced by the expert Dimpex technical team. Performance: High-spec "Multi" version for versatile production needs. Serious inquiries only, please.

Condition: used, Year of construction: 2014, For inquiries: Zoltán Utasi +36 30 205 7380 • motorized pressure bridge adjustment • Electrical system for stepless feed 400 V / 50 Hz, 2.2 kW • “Control PPC 221 – with 8.4'' VGA color display” High-performance control with very simple operation • Edging pre-milling unit 1802, 400 V (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for pre-milling the panel edge • Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left-hand rotation For pre-milling unit 1801 / 1802 • Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right-hand rotation For pre-milling unit 1801 / 1802 • Edge feeding unit 1903 SYNCHRO automatic transport of rolls and strip material • Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) • Pressure unit 1913 pneumatic first roller driven, 2 additional pressure rollers with pneumatic individual control • Cut-off unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm) pneumatically swivelable 0/10° • Multifunction milling unit 1827 pneumatic (2 x 0.65 kW, 200 Hz, 12,000 rpm) • Vertical tracing rollers manual manual adjustment of the vertical tracing roller by 0.1 mm for milling edge overhang, e.g. for plastic edges • Cutter, diamond Ø 56 / 60 mm, Z = 2, R = 2.0 mm, left-hand rotation Diamond-coated, solid tool with CM technology (LEUCO system) with integrated chip extraction, patented ProLock-E • Cutter, diamond Ø 56 / 60 mm, Z = 2, R = 2.0 mm, right-hand rotation Diamond-coated, solid tool with CM technology (LEUCO system) with integrated chip extraction, patented ProLock-E • Corner copying unit 1832 (1 x 0.35 kW, 200 Hz, 12,000 rpm), for edge thickness up to 3 mm • Cutter, diamond Ø 53 mm x 10 mm x 16 mm, Z = 3, R = 2 mm, with CM technology (LEUCO system) with integrated chip extraction, for profiling unit 1832 • Scraper unit 1929 pneumatic including pneumatic adjustment (separately for top and bottom) • HW reversible knives for scraper holder 1929 / 1927 R = 2.0 mm (2 pcs required) • Flat scraper unit 1964 Removing glue residue for a clean glue joint. • Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Nsdpfxsx Huhcj Akuswg For final cleaning and edge polishing. With 2 textile discs, swivel range 0–5°

Condition: used, Holz Her Sprint 1317 Heavy-duty version – Edge thickness 0.4 – 8 mm SPS screen control Infeed ruler controlled via SPS Pre-milling unit for jointing before the gluing section Fully automatic edge magazine for coil and strip materials Glue application station for cartridges + PU bonding Glue application using nozzle technology Workpiece height 6-50 mm Glue height adjustment Pneumatic pressure unit Cutter unit 1918 for coil and strip material up to 8 mm edge thickness With pneumatic adjustment of miter saws from 0-10° angles Milling unit 1942 MOT2 for flush trimming 8 mm, radius milling, bevel milling – 15° Scraper unit for bevels and radii with 2 scraper holders Corner copying/milling unit 1832 for rounding corners up to 3 mm edge thickness in throughfeed Nwsdpfxey Ewv Hs Akujg Pneumatic engagement and disengagement Surface scraper unit – Finish Machine is OPERATIONAL and in GOOD CONDITION Ex works

Condition: excellent (used), Year of construction: 2005, Brand: HOLZ HER Model: SPRINT 1310 - CE Standard Automatic edge banding machine with cartridge-based glue system for processing wood, PVC, ABS, and veneer edging. Suitable for furniture, panel materials, custom manufacturing, kitchens, bathroom furniture, joineries, and much more – complies with CE standards. Technical Data: Min./Max. panel height: 6 – 45 mm Edge thickness: 0.4 – 6 mm Maximum glue pot height: 51 mm Minimum panel width: 60 mm Minimum panel length: 180 mm Feed speed: 8 m/min Compressed air: 6–7 bar Machine Features: Automatic feed for roll and strip material Cartridge glue system enables in-operation switching between EVA and PUR adhesives or changing glue color 3 pressure rollers, 1 driven End trimming unit with 2 motors, each 0.22 kW Multifunction unit with controlled axis for flush and chamfer trimming, with 2 motors at 0.6 kW each Surface scraper unit Radius scraper unit Buffing unit Soundproof hood Control: Rotatable and tiltable operator panel Nodpfx Aoy Emw Hjkuowg All units individually controllable Function display with text and graphics Aggregate pre-selection display Program list with names and numbers, self-diagnosis Approximate machine dimensions: 3900 x 1050 x 1800 mm (H) Weight: 1000 kg INCLUDES OTT Rondomat corner rounding unit Used machine information: • Technical data subject to change and prior sale. • Prices are ex-works, loaded free of charge! • The machine has been cleaned and function tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machines at location. • Special agreements are only valid in written form. (Enquiries will only be answered with your address and telephone number!)

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Features and technical data: - Machine completely overhauled: - New Glue Jet 301 glue application system (top part 1 mm) - All units inspected - All milling cutters resharpened - All knives replaced - Feed speed: 10 - 18 m/min - Workpiece length: min. 160 mm - Workpiece width: min. 60 mm - Workpiece thickness: 8 - 60 mm - Edge thickness: 0.4 - 8 mm - Electrically adjustable feed motor: 400 V / 50 Hz, 2.2 kW - Motorized pressure bridge adjustment - Automatic chain lubrication - PPC 315 control with 15" touchscreen - ECO MODE energy saving function - Infeed fence 1350 mm, motorized adjustment - Jointing unit 1802: - 2 x 2.0 kW, 200 Hz, 12,000 rpm with 2 jointing units for panel edge jointing - Diamond cutter, Ø 70 x 64 x 30 mm, Z2, left rotation for jointing unit - Diamond cutter, Ø 70 x 64 x 30 mm, Z2, right rotation for jointing unit - Edge feeder 1901 fully automatic - Glue application station Glu Jet GJ301 automatic: - 2.3 kW; 50 Hz - Granulate hopper - Pressure unit 1913 MOT - End trimming unit 1918 (60 mm) pneumatic - Multifunctional milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm left rotation - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm right rotation Nwodpfx Aewka Iiekusg - Profile milling unit 1833 MOT4: - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2.5 mm, left rotation with CM technology - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2.5 mm, right rotation with CM technology - Scraper unit 1929 MOT2: - Carbide reversible knives for scraper holder R = 2.5 mm (2 pcs. required) - Flat scraper 1964 - Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: short-term Location: 63934 Röllbach

Condition: good (used), Code: 0338 Brand: HOLZ HER Model: SPRINT 1310 - CE Standard Automatic edge bander with a cartridge-based adhesive system for wood edges, pvc, abs, veneer, suitable for furniture, panels, custom-made furnishings, kitchens, bathroom cabinets, carpentry shops, and various - CE Standard Features: Quick glue replacement: patented cartridge system that allows for quick and efficient switching between EVA and PUR glue during operation, or for changing glue colors - Simply replace the cartridge, no complicated cleaning of the glue tank is required - Ready for use in 3,5 minutes Technical data: Min/max panel height mm 6/45 Applicable edge thickness mm 0,4 - 6 Max gluing height mm 51 Min panel width mm 60 Min panel length mm 180 Feed speed mt/min 8 Composition: Nwjdpfxjyvh Syj Akusg Gluing unit: Automatic feed for roll and strip edging - Patented Holz Her cartridge system - Roller press unit Tilting front and rear end trimming unit - Motors 0,22 Kw Multifunction unit with controlled axis for trimming and chamfering - N° 2 motors 0,6 Kw Edge scraper unit Glue scraper unit for removing any glue residue Brush unit for perfect cleaning Holz Her control system: Rotatable and tiltable control panel - All units can be activated individually - Unit functions with text display and graphical support - Display for unit preselection - Program list with program names and numbers - Self-diagnosis Soundproof booth Compressed air 6-7 atm Overall dimensions mm 4300 x 1200 x 1675 h Weight kg 1700

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Edge Control control system with 18.5" touchscreen color monitor 16:9 Swiveling operator panel, Program storage, Motorized pressure bar adjustment, Feed via transport chain, Feed speed: 8-18 m/min Extendable workpiece support, Infeed fence with motorized adjustment Jointing unit 1961, Diamond jointing cutter for climb and counter rotation, Automatic adjustment to workpiece height Edge feed 1903 Pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 Multi-System Automatic glue height adjustment with sensor nozzle, Pressure regulator for adjusting the cartridge contact pressure, Use of PUR adhesives possible, Pressure unit 1913 MOT, First roller driven End trimming unit 1918 with pneumatic adjustment End trim saw pneumatically swiveling, Multifunction unit 1824 MOT 4 with multifunction cutter radii 1,2,3 mm Corner copying unit 1832 Corner copying up to 3 mm edge thickness Radius scraper 1929 MOT 2 With motorized adjustment of horizontal tracing rollers With pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper, Surfacing scraper 1964 For removing glue residue for a clean glue line With extraction hoods Spray unit 1856 for infeed and outfeed area Buffing unit 1940 For finishing and edge polishing ----- Technical Data ----- Edge thickness roll material: 3 mm, Edge thickness strip material: 8 mm, Max edge thickness for corner copying: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Nwedpev Sv Enofx Akusg Distance workpiece support: 470 mm, Support table diameter for edge material: 800 mm, End cut knife for coiled material up to: 3 mm, Heating time: 3.5 min, Jointing unit power: 2 x 2 kW, End trim saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours taken from a recording in 2022 Availability: short term Location: Röllbach

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 Equipment and technical data: Edge feed for rolls and strips Joining milling unit with 2 milling heads Adhesive application system cartridge 3-roll printing unit Cross-cut saw unit Radius milling unit Nsdpfovymdqjx Akuewg Radius scraper unit Corner copying unit Surface scraper Buffing unit Workpiece thickness min./max.: 6/50 mm Edging thickness: 0.4-15 mm Edging height max.: 55 mm Edging length strip min.: 350 mm Edging projection per side max.: 3 mm Workpiece width min.: 60 mm Workpiece length min.: 180 mm Feed speed: 12.5 m/min. Machine dimensions L x W x H 6480 x 1250 x 1690 mm Availability: short term Storage location: Flörsheim

Condition: reconditioned (used), Year of construction: 2001, machine/vehicle number: 315/0-110, functionality: fully functional, Top control panel Nodpfxoh Ux Suj Akuowg Edge feeding 1902 Glue application station 1906 cross-cut shear 1902 Printing unit 1816 Cross-cut unit 1918 Trimming unit 1942M Rounding scraper 1929 Form milling unit 1983 Surface scraper 1964 Buffing unit 1940 Weight approx. 970 kg Compressed air connection 6 bar suction connection Ø 120 mm Length approx. 5300 mm

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Features and technical data: - Control system with LCD display - Swiveling operator panel - Program memory - Manual pressure bridge adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond jointing cutters for up-cut and down-cut operation Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feeding of coil and strip material Adhesive application system 1906: - Cartridge system with sensor-controlled nozzle - Automatic reloading Nedpfxswka Nyj Akuswg - Use of PUR adhesives possible Pressure unit 1816: - With powered roller - Pneumatic control of the pressure unit End trimming unit 1918: - 2 x 0.22 kW - Swivels from 0 to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle at milling unit Corner copying unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - For plastic edging up to 3 mm - Chip collection box for radius scraper Surface scraper 1964: - Process-controlled surface scraper - Air nozzle at surface scraper Buffing unit 1940 Edge thickness, coil material: 3 mm Edge thickness, strip material: 5 mm Max. edge thickness, corner copying: 3 mm Workpiece thickness: 6-45 mm Workpiece thickness, corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8 m/min Distance, workpiece support: 470 mm Support plate diameter for edge material: 800 mm End trimming blade for coil material up to: 3 mm Heating up time: 3.5 min Jointing cutter power: 2 x 2 kW End saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Extraction nozzle jointing unit: 120 mm Extraction nozzle milling unit: 70 mm Extraction nozzle scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short notice

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 974/1-810, functionality: fully functional, operating hours: 1,483 h, workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, controller model: Edge Control 19 mit 18,5" Touchscreen, The machine was last serviced in February 2026! The machine has the following configuration: Grooving cutter head 1802 Motor power: 2 x 2.0 kW 1. Cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation for grooving cutter head 2. Cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation for grooving cutter head Edge feeder 1901 SYNCHRO (fully automatic) Nwodpfx Akjy Tw Edeuog Glue application station Glu Jet GJ301 (automatic) Power: 2.3 kW, 50 Hz Cartridges: Storage compartment for 14 cartridges (1.4 kg) GluJet collection container Pressure unit 1913 MOT Cutting unit 1918 (60 mm) pneumatic Multi-function cutter head 1826 MOT4 Motor power: 2 x 0.65 kW Air Stream System cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm, left-hand rotation Air Stream System cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm, right-hand rotation Profile cutter head 1833 MOT4 1. Cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, left-hand rotation with CM technology 2. Cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, right-hand rotation with CM technology Scraping blade unit 1929 MOT4 Carbide indexable inserts for scraping blade holder R = 2 mm (2 pcs. required) Surface scraping blade FK 701 Smoothing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Spray device 1856 TECHNICAL DETAILS Feed speed: 10 - 18 m/min Workpiece length min: 160 mm Workpiece width min: 60 mm Workpiece thickness: 8 - 60 mm Edge height max.: 65 mm Edge thickness roll material: 0.4 - 3 mm Edge thickness strip material max.: 8 mm MACHINE DETAILS Control: Edge Control 19 with 18.5" touchscreen Infeed guide length: 1,350 mm Electrical system for stepless feed: 400 V / 50 Hz Feed electric motor: 2.2 kW Operating hours: 1,483 h EQUIPMENT Motorized pressure bridge adjustment Nesting - touch probe vertical top & bottom Edition 18 package ECO MODE energy-saving mode ITronic system

Condition: used, machine/vehicle number: 008369, X axis working area: 3100 mm Y axis working area: 1600 mm Working Table: Flat table Main Electrospindle power: 10 KW Number of controlled axes: 4 axes Nwsdpfxox A Tine Akusg Total number of drilling spindles: 14 Total number of tool changer positions: 6

Condition: excellent (used), Year of construction: 2019, 2019 Holz-Her 7017K CNC Machining Center Nwedsy Symnopfx Akuog Serial Number: 207/1-903; Series: BAZ19V2; Machining Dimensions (Edge Routing): in X=3.540 mm / in Y = 1.287 mm (minus cutter radius): Cutter unit: 6.5 kW ceramic bearings, 1.000 - 18.000 RPM; Vector speed: 100 m/min; Protection equipment: Light grid (1-field machining); Workpiece support: 6 consoles, incl. 8 stops, Laser pointer; Drilling head: 14 Spindle (10V | 4 H), Incl, sawing unit for grooving in X-direction; Workpiece clamping: 100 m3/h vacuum pump, low maintenance dry-running pump; Tool changer: 12-compartment Pick-up tool changer with tool cover; Software: CAMPUS software package, incl. aCADemy, CAD/CAM module.

Condition: excellent (used), HOLZ-HER ProMaster 7125 machining center - used Console machine, additional connections for pneumatic clamps, pneumatic workpiece stops with double-acting cylinders, pneumatic feeding aids, hardened, dust-protected prism guides, helical toothed rack and pinion drive (X-axis), ball screw spindles on Y and Z axes, network card for remote maintenance, switch cabinet cooling with heat exchanger, handheld control unit, C-axis, A-axis, rotating disc tool changer, incl. safety fence, incl. anti-fatigue mats, pendulum operation possible, ceiling laser for positioning suction cups / workpiece, central lubrication, manual, incl. material removal simulation ----- Technical data ----- Machining length (contour milling - radius) X: max 3,605 mm, Machining length (contour milling - radius) Y: 1,335 mm, max. travel speed X: 100 m/min, max. travel speed Y: 100 m/min, max. travel speed Z: 25 m/min, max. workpiece length X: 200 mm, Machine control software: CAMPUS HOPS, Main spindle motor power: 9.5 kW (S6), Main spindle speed: 1,000 - 24,000 rpm, Main spindle arbor: HSK 63, Spindle cooling: coolant, Drilling unit motor power: 3 kW, Drilling spindle arbor: M10, Morse taper 11mm, Number of vertical drilling spindles: 10 pcs, No. of horizontal double drilling spindles in X-direction: 1 pc, No. of horizontal double drilling spindles in Y-direction: 1 pc, Number of consoles: 6 pcs, Number of tools in changer: 18 pcs, Vacuum pump capacity: 140 m³/h, Extraction connection Ø: 250 mm, required volume flow: 5,300 m³/h, required static vacuum: 2,500-3,000 Pa, Compressed air connection: 6 bar, Compressed air consumption: 300 l/min, Dimensions incl. fence (L x W x H): 6,712 x 4,585 x 2,760 mm, Nsdpfx Aoy Uxxnskuowg Weight: approx. 3,800 kg Quality information: - complete basic cleaning - electrical system checked - pneumatics checked - adjusted according to manufacturer's specifications - ready for immediate use

Condition: new, Panel saw HOLZ-HER 1255 SECTOR pro - Exhibition machine - Cutting height 2,200 mm Cutting length 5,300 mm Vertical perfection from HOLZ-HER The vertical panel saws from HOLZ-HER combine proven technology from over 50 years of experience and a rock-solid design that offers you a unique price-performance ratio. offer you a unique price-performance ratio. Your advantages: - Fully welded frame Extremely high rigidity - Precise cutting quality - Finished cut for immediate edge banding - Powerful saw motor with 4 kW output - Space-saving panel layout with a installation area from 4 m² - Smooth and ergonomic operation TRK extraction system (optional in all CE countries): Workstations must meet the highest requirements when it comes to health and safety. HOLZ-HER saws are among the cleanest and safest in the safest in the world. Accessories The extensive range of accessories extends from convenient digital dimension displays through to our our patented Super Cut plus scoring system. TECHNICAL DATA Vertical panel saw for cutting panel-shaped wood materials wood-based materials such as chipboard, MDF, veneer panels, multiplex, etc, veneer panels, multiplex etc. Basic machine: Completely welded frame with extremely high Nwjdpfx Asu R Syijkueg rigidity. Precise guidance of the saw beam / saw unit saw unit for an accurate cut. Manual feed feed for vertical and horizontal cutting. Cutting depth: max. 60 mm Saw beam: Sturdy saw beam guided on precision guides. Pneumatic locking of the saw beam at the top and bottom. Electrically monitored in vertical cut Saw unit: Smooth and ergonomic operation for plunging and and removal of the saw unit. Immersion lever can be lever can be folded down in the upper position for precise immersion of the saw unit. Generously dimensioned lever for easy pivoting. Housing cover opens the complete opens the complete saw unit for easy tool change change incl. ProLock quick-action chuck. Light cut-out: Riving knife can be retracted. Control panel: Efficient operation of the machine. Ergonomically positioned at eye level. Lower workpiece support: Sturdy, wear-free stainless steel support. Support up to the cutting line: Narrow workpieces cannot tip or fall through Extraction: Effective extraction with two connections: Saw unit Ø 120 mm, frame end Ø 100 mm (with TRK variant) Lifting roller transport system: Manually liftable and lowerable rollers for easy and and gentle panel transport. Measuring tape: For displaying dimensions for horizontal cutting with three manual dimension displays: Absolute dimension from the lower workpiece support Absolute dimension from the middle workpiece support Serial cuts from the top edge of the panel This offer is an equipment package. The following items and options are already included in the price: - Sliding grid - Manual longitudinal stop for vertical cutting - Digital dimension display for horizontal cut - 3 adjustable stop points in the saw beam - TRK SH 2.200 suction device - Strip stop for recurring horizontal cuts - new exhibition machine -

Condition: excellent (used), Panel Saw HOLZ-HER 1255 -used- Welded frame with extremely high rigidity, pneumatically retracting shifting grid, stable latching of the saw carriage at both top and bottom, latch monitoring in vertical cut electrically controlled, foldable plunge lever on the saw unit, retractable riving knife for cut-outs, operator panel at eye level, digital display on the longitudinal fence, digital display for horizontal cut, strip cutting device, roller lift transport system, trim-capable support surface, dust extraction device TRK, dust-tested. ----- Technical Data ----- Cutting length: 5200 mm, Cutting height: 2200 mm, Trimming height: 2100 mm, Cutting depth: 60 mm, Minimum height on folding rail: 120 mm, Saw blade Ø: 250 mm, Motor: 4 kW, Extraction port Ø: 120/100 mm, Compressed air: 6 bar, Required space (LxWxH): 6500x1650x3050 mm, Weight: 900 kg Nwsdoyyzp Hjpfx Akueg Quality Information: - Fence strips replaced / refurbished - Comprehensive basic inspection - Complete basic cleaning - Electrical system checked - Immediately operational