Used Homag Edgeteq S-500 for sale (77,199)

Condition: used, machine/vehicle number: 008586, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Csdpfsy In A Nex Ad Ajgt Operating Units: 8 nr

Condition: used, machine/vehicle number: 008585, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, PUR Cedpfx Adey In A As Aogt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 008587, Type of edging: Thin edge Codpfx Adey In Dgj Aegt Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm

Condition: excellent (used), Year of construction: 2018, Chassis for edge banding machines Was mounted on Homag Edgeteq S-200, KDF 1130 FC (1100kg). Will certainly also fit other machines, such as Brandt (minor modifications may be necessary) Length of U-section: approx. 1130mm Overall height incl. castors: approx. 150mm Csdpfew S Dmdjx Ad Aegt 4 sturdy steel swivel castors with grease fittings 2 locking brakes 2 leveling plates for height adjustment Machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller".

Condition: used, Year of construction: 2021, input voltage: 400 V, input current: 17 A, input frequency: 50 Hz, type of input current: three-phase, We are offering this used HOMAG EDGETEQ S-240 edgebander, year of manufacture 2021. The package includes a KOGI dual-bag chip extractor, 2.2 kW / 1650 Pa. The machine comes with an additional glue pot. An appraisal report is attached in the PDF. Type: EDGETEQ S-240 PROFI KDF 230 Machine number: 0-261-73-7111 Year of manufacture: 2021 Wiring diagram: 0-261-73-7111 Supply voltage: 400Y/230 V Number of phases: 3 Frequency: 50 Hz Maximum full-load current: 17.3 A Fuse: 20 A Short-circuit current: 5 kA Control voltage: 24 V Enclosure rating: NEMA 1 Largest motor: 4.6 A Largest heater current: 2.3 A Cjdpfx Ajy Exwfsd Aegt If you have any questions or require further information, please send us a message or contact us by phone.

Condition: refurbished (used), Year of construction: 2017, machine/vehicle number: 0-261-96-0637, Equipment: documentation/manual, Feeding and Discharge of Workpieces • Upper pressure belt • Variable feed rate: 8–18 m/min Csdpfoy Eft Tox Ad Ajgt • Front air-cushion table • Automatic infeed fence • Prepared for connection to return system Edge Banding • PUR pre-melter, capacity 2.5 kg/h • Glue pot QA65, quantity: 2 • Support for narrow workpieces • Automatic edge feed Workpiece Finishing • Anti-adhesive and cleaning fluid system • End trimming unit • Edge milling unit with R-2 and R-1 tooling • Flat scraper, top/bottom polishing unit • Multifunctional profile scraper unit with R-2 and R-1 tooling • Corner rounding unit with R2 tool, dual-motor MF50 Documentation • Language options: English, German, Croatian • Format: Data storage medium + paper documentation General Information • Year of manufacture: 2017 • Control system: HOMAG POWERTOUCH group • CE marking: YES • Availability: Ready for collection – April 2026 • Machine length: approx. 6,075 mm

Condition: used, machine/vehicle number: 008325, Position 1: Single Edgebanders HOMAG-EDGETEQ S-390 - LOOPTEQ O-300 Csdjx Hpkljpfx Ad Asgt Position 2: Panel Return Systems HOMAG-EDGETEQ S-390 - LOOPTEQ O-300

Condition: used, machine/vehicle number: 008323, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Csdpfx Aox Hpkxod Ajgt Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: reconditioned (used), Year of construction: 2019, machine/vehicle number: 0-261-04-6440, functionality: fully functional, Feeding and removing of workpieces: • Pressure beam with rollers • Variable feed speed 8-14 m/min • Automatic grooving fence • Glue pot QA65 Edge banding: • Multifunctional profile scraping unit with R-2 and R-1 tools • Corner rounding unit with R-2 tool Cjdpfx Aoykzdked Ajgt Finishing of the workpiece: • Anti-adhesive and cleaning fluid • End trimming unit • Edge milling unit with R-2 and R-1 tools • Flat scraper, top-bottom polishing unit • Prepared for connection to a return system Documentation • Selected language: Polish • Documentation in machine control, in printed form General information • Year of production: 2019 • Machine length: 5573 mm • HOMAG control - POWER TOUCH • CE mark • Processed meters: 800,000

Condition: used, Year of construction: 2020, functionality: fully functional, Compact edgebanding machine of the EDGETEQ series for the small handicraft business with possibility of automatisation of the units. Basic equipment (2020): Control easyTouch Joint milling unit Gluing unit + 1 spare glue pot Cutting saw unit, double motor, pneu. adjustable Milling unit with manual adjust on flush, fibre, radius Form milling unit/Edgerounding unit Profile scraper, pneu. adjustable Flat scraper Buffing unit Technical data (2020): Machine length [mm]: 4.153 Workpiece width workpiece thickness 8 - 22 [mm]: 70 workpiece thickness 23 - 50 [mm]: 120 workpiece thickness 41 - 60 [mm]: 150 Workpiece thickness [mm]: 8 - 50 (opt. 8 - 60) Cgodpfx Adew Tcpme Aot Edge thickness [mm]: 0,4 - 3 Feed [m/min]: 11

Condition: used, Year of construction: 2018, operating hours: 7,610 h, total height: 1,650 mm, total length: 4,400 mm, total width: 1,000 mm, Colour: Grey Weight: 2.500 kg Price: On request - Details: - └ Description: Machine currently still has a malfunction to be fixed - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Operating hours: 7610 - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit Cgjdpfey Ewv Tjx Ad Aot - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Radius scraping unit - - Tools available: Yes - └ 7th unit type: Corner rounding unit - - Tools available: Yes - └ 8th unit type: Flat scraping unit - - Tools available: Yes - └ 9th unit type: Brushing unit - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 10.3 - Fuse [A]: 16 - Transport dimensions: 4400mm x 1000mm x 1650mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), FULL LINE of Double-side Sizing-Milling & Edge Banding, max working width mm 2500, with automatic handling. Composed of the following machines: X04004A) Double Loader "BARGSTEDT" TBH 500/D/30/14 with central motorised roller conveyor X04004B) Turning station (90°) lengthwise to crosswise "HOMAG" Mod. TDR31/25/12 X04004C) Splitter "HOMAG" Mod. FPR620/04/15/PS/LQ to split in two parts the unique panel X04004D) Seperation Station "BARGSTEDT" X04004E) Double-side Sizing & Edge Banding machine "HOMAG" Mod. KFR 620 / 19 / QA / 25 Cgsdpfx Adelikvhe Aot X04004F) 1° Automatic (through-feed) Multi Borer "WEEKE" Mod. BST 500 D X04004G) 2° Automatic (through-feed) Multi Borer "WEEKE" Mod. BST 500 D X04004H) Turning station (90°) crosswise to lengthwise "HOMAG" Mod. TDR 51/25/12 X04004I) Motorized belt transfer "HOMAG" TR 10/70/12 X04004L) Splitter "HOMAG" Mod. FPR620/04/15/PS/LQ to split in two parts the unique panel X04004M) Double Stacker "BARGSTEDT" Mod. TSP 420/40/30/12 BA with central motorised roller conveyor

Condition: used, Clamping plate, unit carrier, milled surface, welding table, welding table -Clamping surface width: 500 mm -Length of the table surface: 10930 mm Cgodpeb Uhpisfx Ad Ast -Height of table surface: 262 mm -Working height: 262 mm -Price: per piece -Number: 1x available -Transport dimensions: 11370/510/H240 mm -Weight: 2020 kg

Condition: refurbished (used), Numerical Control Type Power Control Professional Software woodWOP / TopDrill BST No. 2 Through-feed motorized conveyoring belts (4 x Kw ?) No. 2 Horizontal units/supports (with Digital quota/axes display) No. 1 Drilling head for each horizontal unit (1 x Kw 1,5) No. 21 Splindles for each horizontal drilling head Max. working width (mm) 2500 Min. working width (mm) 250 No. 4 Bottom vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) Miscellanous Spindles for each drilling head of the bottom vertical supports Cedpfodz Uk Tex Ad Aogt No. 2 Top vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each top vertical unit (2 x Kw 1,5) Miscellanous Spindles for each drilling head of the top vertical supports No. 4 Vertical top pressure clamps Motorized carpet to evacuate chips and wastes Total installed power (Kw) 36

Condition: excellent (used), AUTOMATIC MULTI-BORER "WEEKE" In line with another machine possible Numerical Control Power Control Software WoodWop (TOPDRILL BST 500) Through-feed motorized transport belts (No.) 2 (with adjustable speed) Horizontal units/supports (No.) 2 Drilling heads/Blocks for each horizontal unit (No.) 2 Spindles for each horizontal drilling head (No.) 11 Max. working width (mm) 3000 Min. working width (mm) 250 Bottom vertical units/supports (No.) 6 Drilling heads/blocks for each bottom vertical unit (No.) 2 Csdpjh Ryhnjfx Ad Aogt Spindles for each drill head of the bottom vertical supports (No.) Various Top vertical units/supports (No.) 2 Drilling heads/block for each top vertical unit (No.) 2 Spindles for each drill head of the top vertical supports (No.) Vertical top pressure clamps (No.) 6 Transport belt to evacute chips (wastes) Quota (axes) digital display Total installed power (Kw) 26

Condition: refurbished (used), Numerical Control Type Power Control Software No. 2 Through-feed motorized conveyoring belts No. 2 Horizontal units/supports (with Digital quota/axes display) No. 2 Drilling heads for each horizontal unit (1 x Kw 1,5) Cgjdpfx Adjvhcbzo Ajt No. 11 Splindles for each horizontal drilling head Max. working width (mm) 3000 Min. working width (mm) 250 No. 6 Bottom vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) N. 11 Spindles for each drilling head of the bottom vertical supports No. 2 Top vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each top vertical unit (2 x Kw 1,5) N. 11 Spindles for each drilling head of the top vertical supports No. 6 Vertical top pressure clamps Motorized carpet to evacuate chips and wastes Total installed power (Kw) 50 / 60 (ca.)

Condition: excellent (used), Numerical Control Type Power Control Codsivawpjpfx Ad Asgt Software TOPDRILL BST 500 No. 2 Through-feed motorized conveyoring belts No. 2 Horizontal units/supports (with Digital quota/axes display) No. 1 Drilling head for each horizontal unit (1 x Kw 1,5) No. 21 Splindles for each horizontal drilling head Max. working width (mm) 2500 Min. working width (mm) 250 No. 4 Bottom vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) N. 11 Spindles for each drilling head of the bottom vertical supports No. 4 Vertical top pressure clamps Motorized carpet to evacuate chips and wastes Total installed power (Kw) 20

Condition: good (used), Technical data for pallet rack frame: Racking system: META (Thyssen) Type: Multipal S Included in delivery: 01x pallet rack frame, used Material color: Sendzimir galvanized Cgedpfeyz Tczsx Ad Aet Frame type: SR 85|20 Profile dimensions: 85 x 75 x 2.0 mm Including horizontal and diagonal braces, frame protectors and base plates The frames are pre-assembled (bolted lattice construction) Height: 7,000 mm Depth: 500 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for collection only. Transport or shipping beyond self-collection is subject to additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: used, machine/vehicle number: 003935, Max Panel Width: 1200 mm Cgsdpewucknsfx Ad Aot Max Panel Length: 40 mm Max feed speed: 60 m/min Operating Units: 3 nr

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) Safety cabin (enclosure) of the working head Numerical Control PowerControl PC86 power Touch (Software woodWOP) Separate electric and command cabinet No. 2 Workpieces fixing clamps (for the panels introduction in the working area) WEEKE Prepositioning Unit - to position workpieces in machine with clamp grippers faster. In-feeding working table (panel support) and Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 (2 x 4 mm) Csdpfxoyyvtts Ad Ajgt Maximum workpiece dimensions (X -Y- Z) mm 3000 x 1000 (option mm 1300) x 80 (2 x 40 mm) Two panels simultaneously processables (in Z axe) Separate electric and command cabinet WORKING GROUPS (TOP): 2V42, 2H8X/2Y, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 42 Vertical drilling spindles (power Kw 2.3) No. 10 Horizontal drilling spindles (8 in X + 2 in Y) WORKING GROUPS (BOTTOM) 2V42, 2H8X/2Y, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 42 Vertical drilling spindles (power Kw 2.3) No. 10 Horizontal drilling spindles (8 in X + 2 in Y)

Condition: used, machine/vehicle number: 006622, Max. panel width: 2100 mm Max. panel length: 2850 mm Max. panel stack height from the ground: 2100 mm Lifting capacity: 250 Kg Movement system: suction cups. Cgodpfx Aou T Tt Tod Ast

Year of construction: 2011, condition: ready for operation (used), Main Drive Number of axis 3 This 3-axis HOMAG WEEKE OPTIMAT BHX 500 was manufactured in 2011. It features a robust CNC processing center with a working area of 2500 mm by 1300 mm, main electrospindle power of 6 KW, and a maximum panel thickness of 80 mm. It includes 84 drilling spindles and dual milling spindles, each offering 6 KW at 18000 rpm. If you are looking to get high-quality CNC capabilities, consider the HOMAG WEEKE OPTIMAT BHX 500 machine we have for sale. Contact us for more information. Cgedpfx Adox D Nvgo Ajt Application Types CNC Wood Machining

Condition: excellent (used), Year of construction: 2021, operating hours: 140 h, functionality: fully functional, feed length X-axis: 3,050 mm, feed length Y-axis: 1,250 mm, feed length Z-axis: 80 mm, input frequency: 50 Hz, input current: 29 A, working width: 3,050 mm, We offer this very good HOMAG DRILLTEQ V-500 throughfeed drilling machine, year of construction 2021. Working dimension X 3.050 mm Working dimension Y 1.250 mm Working dimension Z 80 mm Number of milling spindles 1 Main motor power 10 kW Rotation speed max 24.000 rpm Tool clamping system HSK-F63 Tool changer positions 4 Vertical drilling spindles 15 Horizontal drilling spindles in X 6 Horizontal drilling spindles in Y 4 Groove saw 90° turnable Vertical working surface Machine table Feed-through technology Special workpiece clamping system clamp gripper Barcode reader Safety device enclosed cabin Control Homag powerTouch, HOMAG POWER CONTROL Software HOMAG WOODWOP 7.2 Conformity marking Cedeylp Slopfx Ad Aogt CE mark Category: Machining centre Type designation: DRILLTEQ V-500 Subtype: OPTIMAT BHX200 Machine number: 0-250-73-7195 Wiring diagram: 0-250-73-7195 Supply voltage: 400Y/230 V Neutral conductor: yes Phases: 3 Frequency: 50 Hz Maximum operating full load current: 29 A Fuse rating: 35 A Control voltage: 24 V If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Profile scraper unit, profile scraper, flat scraper unit, finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine -HOMAG finishing unit allows you to smooth the milled edges for optimal appearance of the edge overhang -with scanning of 2 sides each -scraping blade from above and below Cgodpfx Adsb Sc Sts Aet -Quantity: 1 piece available -Dimensions: 500/450/H650 mm -Weight: 60 kg

Condition: used, Unit carrier, clamping plate traversing table, for unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG unit carrier for milling units -with heavy leadership -laterally movable -with counter -Table height: 272 mm -Table surface: 1555 x 300 mm -Table thickness: 18 mm -Dimensions: 1555/500/H272 mm Codpeb Uhp Sefx Ad Asgt -Weight: 190 kg