Used Illig Hsa 50 C for sale (75,455)

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 616, type of input current: AC, input voltage: 240 V, compressed air connection: 6 bar, film width: 480 mm, input current: 16 A, For sale is an ILLIG HSA 50 C blister packing machine, year of manufacture 1991. This is a high-performance automatic inline blister sealer with card feeder, suitable for film thicknesses from 150 µm to 400 µm (possibly higher, but not personally tested). The complete line is being offered (see pictures). Speed: 1–9 cycles/minute with 4-up production. Example: air freshener, 4 units per blister palette = 2000 blisters/hour. Approximate dimensions: 9m x 1m x 2.25m. Sealing plate size: 57x32cm. The machine is 100% functional and is still in operation. Inspection and trial run before purchase are possible. Location: Czech Republic (10 minutes past the Bavarian/Czech border at Furth im Wald). Pgodey Anifopfx Ag Djk

Condition: defective spare-parts repository (used), Manufacturer: Illig Type: HSA 50C Pgjdpouk Dwfofx Ag Djk The machine is incomplete and not operational! For spare parts only!!

Condition: ready for operation (used), Year of construction: 1989, operating hours: 38,907 h, functionality: fully functional, machine/vehicle number: 256, type of input current: three-phase, For sale: ILLIG HSA 50 RD blister machine, manufactured in 1989. This is a high-performance through-feed blister sealing machine with a carton feeder, film thickness: 150µm-600µm. The line is sold including a thermoforming station (currently disconnected as we have not used it). Speed: 5-18 cycles/min. For reference, lipstick blistering output is approximately 16,000 packs/8 hours. Dimensions (without forming station): 465x115 cm + 68 cm unloading station (currently dismantled). Maximum sealing area per tray: 50x30 cm. Maximum tray size: 57x35 cm. The machine is 100% fully operational and in continuous production. Inspection prior to purchase possible. POLAND. Pgodpfx Agsywhxce Dek

Condition: excellent (used), Year of construction: 1999, operating hours: 80,188 h, machine/vehicle number: 322, Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Packaging was produced especially for the dairy industry. Pgodpfx Asq Nn Hceg Dek The cycles are 18-25 strokes - depending on the cup weight.

Condition: ready for operation (used), Year of construction: 2005, Offered is an ILLIG HSA 30 RD - high-performance continuous sealing machine for blister packaging: blister films: PVC, PET APET/PETG, PS, film thickness: 150µm-600µm, lid materials: heat-sealable cardboard, aluminum composite films, Tyvek, sealing area X/Y max. approx. 500mm/300mm, forming depth max. approx. 100mm, 8-18 cycles/minute. Inspection possible by arrangement. Expected to be available June 2026. Psdpfeylbrkox Ag Djgk

Condition: ready for operation (used), Year of construction: 2004, An Illig slide blister machine is available. Blister length range: 110mm-500mm, blister width range: 50mm-280mm, max. blister depth: 80mm, fold-over edge. An on-site inspection is possible. Pjdpjyyplcjfx Ag Dogk

Condition: new, functionality: fully functional, power: 460 kW (625.43 HP), fuel type: electric, Year of construction: 2026, Henan Mingyuan Heavy Industrial Equipment Co., Ltd. has established itself as a premier global manufacturer, providing integrated Sand and Gravel Production Lines that transform raw minerals into precision-graded materials. Pgsdsq Nywxepfx Ag Dek A MINGYUAN production line is not just a collection of machines; it is a synchronized system engineered for maximum throughput, minimal waste, and low operational costs. -1. Core Equipment Configuration The MINGYUAN system follows a multi-stage reduction philosophy to ensure particle shape and quality. Vibrating Feeder (GZQ Series):Ensures a continuous, uniform flow of raw material to the primary crusher. It features grizzly bars to pre-screen dirt and "fines," protecting the crusher from unnecessary wear. Primary Jaw Crusher (PE/C-Type): The "workhorse" designed for the initial breakdown of hard rocks (granite, basalt, river pebbles). MINGYUAN’s jaw crushers utilize a deep-chamber design for high crushing ratios. Secondary Crusher (Impact or Cone):Impact Crusher (PF Series): Ideal for medium-hard materials; produces highly cubic final products with excellent grain shape. Cone Crusher (Hydraulic/Spring): Preferred for high-hardness materials (granite/quartz) due to its high efficiency and low wear-part consumption. Sand Making Machine (VSI Series): The "finisher." It uses "stone-on-stone" or "stone-on-iron" technology to shape aggregates and produce high-fineness artificial sand. Vibrating Screen (YK Series): A high-frequency circular screen that classifies material into specific sizes (e.g., 0-5mm, 5-10mm, 10-20mm, 20-40mm). * Sand Washing Machine (XSD/LSX Series):Removes mud and impurities to ensure the final product meets strict concrete and asphalt standards. 2. Technical Specifications & Performance MINGYUAN offers scalable solutions tailored to project size, ranging from small-scale mobile units to massive industrial stationary plants. | Feature | MINGYUAN Standard Specifications | | Production Capacity | 50 – 600 $t/h$ (Tons Per Hour) | | Max Input Size | Up to 1,100mm (depending on Jaw model) | | Finished Product Size | 0-5mm, 5-10mm, 10-20mm, 20-40mm (customizable) | | Power System | High-efficiency AC Motors or Diesel-Electric Hybrid | | Control System| Centralized PLC Control Cabinet with safety interlocks | | Materials Processed | River stone, granite, limestone, basalt, iron ore, and C&D waste | 3. The MINGYUAN Technical Advantage What differentiates MINGYUAN in the global market is the "One-Stop" solution approach: 1. High Crushing Efficiency:Optimized crushing cavities increase the contact area between the material and the liners, reducing energy consumption per ton. 2. Environmental Compliance: Systems can be equipped with advanced dust suppression misting and fully enclosed belt conveyors to meet stringent urban environmental regulations. 3. Durability: Wear parts (jaw plates, blow bars, mantles) are manufactured using high-manganese and high-chrome alloys, significantly extending the time between maintenance cycles. 4. Flexible Layouts: Whether for a mountain quarry or a tight urban recycling site, MINGYUAN provides customized CAD layouts to optimize gravity-flow and reduce conveyor length. 4. Conclusion A MINGYUAN Sand and Gravel Production Line represents a strategic investment in efficiency. By combining primary strength with precision finishing and washing, the brand ensures that every ton of raw material is maximized for its commercial value.

Condition: new, Siemens 6SC6500-0NA01 HSA control SN 77023664, unused in sealed original packaging, 100% functional Pjdpfexag E Rex Ag Dogk

Condition: ready for operation (used), Siemens 1PH6107-4NF46 AC-HSA motor without fan and encoder SN:EDN60209506004, used, normal signs of wear, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire separately for charges for packing and shipping! Pgodpfxsx Dvu Nj Ag Dek

Year of construction: 2006, condition: good (used), Illig SK 74-C from a workshop for the disabled Pgodpfx Ajr Nv E Nsg Dek Year of construction 2006 serial no.426-0172 +2 pallets with approx. 38 rolls of film Dimensions in mm approx. 2200x1600x1600

Condition: new, Sand Gravel Fabrication Plant: Essential Solution for Modern Construction Needs In the construction and infrastructure industry, high-quality sand and gravel are critical raw materials for creating concrete, asphalt, and other foundational elements. A Sand Gravel Fabrication Plant is the cornerstone of producing these materials efficiently and at scale. With advanced technology, versatility, and scalability, these plants cater to a wide range of projects, ensuring consistent quality and meeting the growing demand for construction materials. This article explores the general introduction, features, and applications of sand gravel fabrication plants, including both stationary and mobile systems. General Introduction to Sand Gravel Fabrication Plants A sand gravel fabrication plant is a specialized facility designed to process raw materials such as sand, gravel, and aggregates into construction-grade products. These plants combine various equipment, including crushers, screens, conveyors, washers, and storage units, to convert raw materials into ready-to-use aggregates. There are two primary types of sand gravel fabrication plants: Stationary Fabrication Plants: Fixed installations designed for high-capacity production. Ideal for large-scale operations and long-term projects. Mobile Sand Gravel Fabrication Plants: Portable systems that can be transported to different project sites. Perfect for temporary operations and projects in remote locations. Both types are equipped with advanced machinery and automation systems to ensure high efficiency, precision, and sustainability. Applications of Sand Gravel Fabrication Plants Sand gravel fabrication plants are indispensable across multiple industries due to their ability to produce high-quality aggregates. Key applications include: 1. Construction and Infrastructure Produces sand and gravel for concrete, asphalt, and base materials. Supports large-scale infrastructure projects such as highways, bridges, airports, and railways. 2. Residential and Commercial Development Supplies aggregates for building foundations, driveways, landscaping, and drainage systems. Plays a vital role in residential housing and commercial property construction. 3. Road Construction Provides high-quality crushed stones and sand for roadbeds, pavements, and highways. Ensures durability and longevity of road surfaces. 4. Mining and Quarrying Efficiently processes mined materials into usable aggregates. Pgsdpfxevlwqle Ag Dok Enhances productivity in quarrying operations with optimized material handling systems. 5. Environmental Restoration Supplies aggregates for erosion control, land reclamation, and shoreline protection projects. Facilitates sustainable environmental rehabilitation efforts. 6. Recycling of Construction Waste Mobile sand gravel fabrication plants are ideal for recycling concrete and asphalt. Converts waste materials into usable aggregates, reducing landfill burden and promoting sustainability. Stationary vs. Mobile Sand Gravel Fabrication Plants Stationary Fabrication Plants Best For: Long-term, large-scale projects and industrial operations. Advantages: High-capacity production. Robust and durable structures. Advanced automation for minimal manual intervention.

Condition: used, Vötsch Type: NTUD 125/130/125 Pass-through oven Pgjdpfx Aey H Akrog Dok Last maintenance: 3.12.25 Temperature control in 3 zones: Control of the internal temperature via an electronic temperature control system, divided into 3 separate temperature zones and controlled by semiconductor switching devices. This ensures good temperature uniformity whether operating in fresh or recirculated air mode. Temperature program control: The CTC control system is operated via a dialog PC with TSI software for the heating control of each temperature zone, as well as the activation of the recirculation fans and damper control. Horizontal airflow with reversal: By switching the electronically or pneumatically actuated dampers, the airflow direction can be set from left to right or right to left. The airflow direction for each of the 3 zones can be independently adjusted. Vertical airflow: By shifting a cover plate in the oven ceiling. Useful floor area: The floor area can be driven on using customer-provided loading trolleys. Recirculation fans: Each zone is equipped with a radial fan. Usable space dimensions: 1300 mm height / 1250 mm width / 1250 mm depth External dimensions: 2490 mm height / 1770 mm width / 1810 mm depth Volume: 2000 liters Connection rating: 400V(N)PE AC 50/60 Hz 22 kVA Rated current: 32 A Power: 18 kW Nominal temperature: 50 to 150°C Weight: 1000 kg Condition: used Scope of delivery: (See photo) (Specifications and data subject to change and errors excepted!) We are happy to answer any further questions by phone.

Condition: excellent (used), CTS Type: TSS-70/350-A Water-cooled refrigeration unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. This unit is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Typical applications: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical specifications: Type: TSS-70/350-A Temperature range: Warm chamber: +50°C to +200°C Cold chamber: -70°C to +100°C Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 20.4 kW Rated current: approx. 36.5 A Refrigeration system: Refrigerant: R404A / R23 Precooling stage: approx. 6.0 kg Psdey Hkgbjpfx Ag Dsgk Cooling stage: approx. 3.0 kg Water-cooled Features / Equipment: - CTS control panel with touch display - Microprocessor-controlled regulation and monitoring system - Program operation - Digital setpoint and actual value display - 2-zone system (warm and cold chamber) - Automatic transfer basket for shock tests Technical design: - Warm and cold chamber separated - Transfer basket system for rapid temperature change - Test chamber made of stainless steel - Insert shelf / wire rack - Viewing window in door - Water cooling connections available - Integrated control cabinet Dimensions: External dimensions (HxWxD): approx. 2335 x 940 x 1820 mm Installation dimensions (HxWxD): approx. 1990 x 940 x 1652 mm Internal dimensions (HxWxD): approx. 410 x 480 x 660 mm Weight: approx. 950 kg Additional data: Protection class: IP 54 Operating overpressure: approx. 25 bar Test pressure: approx. 27.5 bar For your safety as a buyer, please note the following information! The following points are carried out on the chambers we offer before sale: 1. Functional check and replacement of necessary components 2. If needed, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run Condition: used Scope of delivery: see pictures (Specifications subject to change and errors excepted!) We are happy to answer any further questions by phone.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled chiller unit For sale is a high-quality thermal shock test chamber manufactured by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for thermal shock testing and is commonly used in industry, research, and quality assurance. Application fields: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K over time ±2 K spatially Temperature change rate: Max. 100 K/min on average for shock test cycles (without radiant heat) Transfer rate: ≤ 15 min in the range -65°C to +200°C with 10 kg ICs Transfer time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 16.7 kW Nominal current: approx. 26.8 A Site-side fuse: 32 A slow-blow Connection: Cekon 32 Cooling system: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features and equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Program operation (up to 100 test programs) - Digital setpoint/actual value display - RS232 interface - 2 free switching channels for controlling test objects on-site - Fault alarm with floating contact (rated for up to 30 V-DC, 2 A) - EMC tested Technical design: - Hot and cold chambers - Transport basket with spindle drive - Test chamber / basket made of stainless steel, Material no. 1.4301 - Insert basket made of stainless steel wire - Pipe duct NW 50 with closing plug - Compressed air connection 1/4" male - Pressureless condensate drain R 1/2" internal thread - Safety door lock - Lockable door with window Pjdpfxsy Hkfdj Ag Dogk Dimensions as per installation drawing: External dimensions approx.: 2335 x 940 x 1820 mm Entry dimensions approx.: 1990 x 940 x 1652 mm Test chamber dimensions: Height approx. 410 mm, Width approx. 480 mm, Depth approx. 660 mm Window: 300 x 300 mm Further data: Degree of protection: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average power consumption per test cycle: approx. 8 kWh For your assurance as a buyer, the following procedures are performed on all offered chambers beforehand: 1. Function check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented trial run Condition: used Scope of delivery: see pictures (Specifications subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests Pgodpfx Agey Hkd Hs Dsk - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: used, machine/vehicle number: 12659, Rotor diameter: 300 mm Rotor width: 500 mm 3-knife rotor 2 rows of stator knives Podoyr Tqropfx Ag Degk Infeed opening approx. 500 x 490 mm Drive motor: 22 kW

Condition: new, Year of construction: 2026, machine/vehicle number: PRASA HYDRAULICZNA TYPU C HPW 50 50 TON, functionality: fully functional, input voltage: 400 V, pressing force: 51 t, stroke length: 200 mm, table width: 400 mm, table length: 500 mm, pressing speed: 18 mm/s, Hydraulic C-Frame Press Our hydraulic C-frame press is a professional machine designed for precise and demanding machining operations. Thanks to its C-frame construction, it provides easy access to the working area, allowing the processing of larger components and convenient handling of material from different sides. Key Features High pressing force – ideal for bending, straightening, pressing, and assembling components. C-frame construction – improved ergonomics and excellent accessibility to the working area. Solid steel frame – ensures durability and safe operation. Precise hydraulic control – smooth adjustment of force and operating speed. Industrial and workshop applications – perfect for both large manufacturing plants and smaller workshops. Thanks to its versatility and robust construction, this press is suitable for many industries, from automotive and metalworking to technical service centers and tool shops. Specifications Pressing force: 500 kN (approx. 51 tons) Maximum pressure: 25 MPa Maximum opening: 500 mm Stroke: 200 mm Table dimensions: 500 × 400 mm Throat depth: 200 mm Downward speed: 19 mm/s Return speed: 18 mm/s Motor power: 4 kW Delivery to the customer is possible. The delivery cost is determined individually according to the quotation of the transport company. Podeyr D R Nepfx Ag Degk If you are interested in other machines, we encourage you to visit our website.

Condition: good (used), functionality: fully functional, mileage: 125,000 km, power: 110 kW (149.56 HP), first registration: 07/2011, fuel type: diesel, color: white, emission class: euro5, Year of construction: 2011, Equipment: ABS, air conditioning, Used truck ISUZU M 50 C 150 3-sided tipper, year 2011, engine 3000 150 hp, automatic transmission, tipper body length 3,300mm, wheelbase 2,500mm. total length of the truck 5,100mm, total weight 5000 kg (C license), payload 2,500 Kg, air conditioning, ABS, Euro 5, 70% tires, mechanical spring suspension, electric mirrors + windows, radio, Km 125,000, good condition. Pgedpfx Agouiyals Dsk INFO ENG: Used truck ISUZU M 50 C 150 3-sided tipper, first registration 2011, engine 3000 150 hp, automatic transmission, tipper body length 3,300mm, wheelbase 2,500mm. total length of the truck 5,100mm, total weight 5,000 kg (license C), payload 2,500 kg, air conditioning, ABS, Euro 5, 70% tyres, mechanical leaf spring suspension, electric mirrors + windows, radio, 125,000 km, good condition.

Condition: excellent (used), Year of construction: 1993, Center height: 250 mm Center width: 2000 mm Swing diameter: over bed 500 mm Spindle bore: 50.8 mm Spindle mount: size 6 Pgjdpfx Aov Dhzfsg Dsk Tailstock taper: 5 MK Spindle speeds: 22 - 2000 rpm Feeds: longitudinal/transverse 0.05-6.4/0.025-3.2 mm/rev Thread pitches: 80 - 1 mm Electrical connection: 380 V, 5.5 kW Space required: 3600 x 1100 x 1500 mm Weight: 1875 kg

Condition: excellent (used), Weiss Type: WK 27'/50-150 Pedpfovx Nfbox Ag Dogk Climatic Test Chamber Water-cooled Technical Data: Test Chamber Designation: WK 27'/50-150 External Dimensions Height 3500 mm, Width 3400 mm, Depth 6000 mm Control Cabinet Dimensions Height 2000 mm, Width 2400 mm, Depth 400 mm Internal Dimensions Height 3000 mm, Width 3000 mm, Depth 3000 mm Floor load capacity: 30,000 N/m³ (surface load) Test chamber volume: approx. 27,000 liters Specimen mass: 1000 kg Cooling / Heating Operation -50°C to 150°C Heating rate: 1.0 K/min Cooling rate: 1.0 K/min Temperature stability: ±0.3 to 1.0 K (over time) Temperature stability: ±0.1 to 0.5 K (over time) Climatic Operation 10 to 90°C Humidity: 10...98% rH Temperature stability: ±0.1 to 0.5 K (over time) Dew point range: +4 to +84°C 3/N / PE AC 400 V ±10% 50 Hz Weight: 7000 kg Refrigerants: R23 and R404A Equipped with extra floor plates to increase floor load capacity Important safety information for buyers: The following steps are carried out on all chambers we offer in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. After successful inspection, the chambers undergo a trial run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Subject to alterations and errors in the technical data and specifications!) If you have further questions, we are happy to assist you by phone.

Condition: used, mileage: 131,000 km, power: 118 kW (160.44 HP), fuel type: diesel, fuel: diesel, color: yellow, gearing type: mechanical, emission class: euro6, Year of construction: 2021, Year of manufacture: 2021 Cab: double VAT/margin: VAT qualifying = Additional options and accessories = - Rear air suspension = Remarks = 6-seater PTO Hydraulic Like new Pedpfjymdh Rsx Ag Djgk

Condition: new, Year of construction: 2025, functionality: fully functional, We would like to sell 28 rolls of Polyskin "S" Surlyn film – uncoated. Thickness: 0.150 mm Pgedpox Tf N Rofx Ag Djk Width: 540 mm Running length: 300 m

Condition: new, functionality: fully functional, working width: 510 mm, area performance: 2,040 m²/h, overall weight: 112 kg, input voltage: 230 V, water tank capacity: 60 l, Technical specifications: Condition - NEW! Catalog number: 1.127-002.0 Power supply: 230V cable Drive: Propulsion via brush rotation Brush working width (mm): 510 Suction working width (mm): 900 Fresh/dirty water tank capacity (l): 60 / 60 Theoretical cleaning capacity (m²/h): 2040 Brush speed (rpm): 180 Brush contact pressure (g/cm² / kg): 27.3 – 28.5 / 20 – 23 Water consumption (l/min): max. 2.3 Sound pressure level (dB(A)): 67 Color: anthracite Total weight with water (kg): 112 Weight without accessories (kg): 52 Dimensions (L × W × H) (mm): 1170 × 570 × 1025 Scope of delivery and equipment: 900mm V-shaped suction bar with oil-resistant polyurethane rubber pads 510mm red disc brush - medium-hard Features: 2-tank system Advantages: - Self-explanatory symbols and clear control panel. Solenoid valve for automatic water shut-off after releasing the dead man's switch. Easy operation thanks to a few yellow-coded controls. - Highly maneuverable and easy to handle. Excellent visibility of the area to be cleaned. - Designed for daily use. Robust, durable, and reliable machine. Psdpfxeya Et Us Ag Degk Key features: - Options for attaching hooks, containers, mops, etc. - Additional cleaning supplies can be carried. - Excellent value for money.

Condition: excellent (used), CTS Temperature test chamber T-55/1000 Li water-cooled Temperature range: -50°C to +100°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Nominal current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 The type designation of the CTS cabinet series is composed as follows: z. e.g. type T -55/1000/Li 1) T means: temperature 2) -55 means: lower temperature -55 °C 3) 1000 means: 1000 liter test chamber volume 4) Li means: special equipment for tests with lithium-ion accumulators Control: Pjdpfx Aovba Raog Degk 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for on-site test material control Test room lighting: energy-efficient, high-intensity LED light strip mounted on the door Insert grid: Stainless steel, support surface 970 x 980 mm Load per shelf max. 35 kg Total load with max. grating load 100 kg 1a Feed-through NW50 1b Feed-through 2x NW125 1c Entry port 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat compensation approx. 4000 W at +20°C approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without heat compensation and without additional equipment. Options may affect the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, width, approx. 860 mm, depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, width, approx. 1270 mm, depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Nominal current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) Mass approx. 1000 kg Heat output to the installation room 10.4 kW Cooling unit: water-cooled, low-noise, fully hermetic Infinitely variable output adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, functionality: fully functional, machine/vehicle number: 515060G00101, Year of construction: 2016, operating hours: 881 h, load capacity: 1,000 kg, fuel type: electric,