Used Imatec Fu-145 for sale (4,436)

Condition: used, Year of construction: 1986, Universal Milling Machine Manufacturer: IMATEC, Type: FU-145 Year of manufacture: approx. 1986 Technical Specifications Manufacturer: IMATEC Type: FU-145 Year of manufacture: approx. 1986 Conventional Control System Travels X/Y/Z: 1000 / 300 / 500 mm Vertical Spindle Speeds: 38 - 1440 rpm Horizontal Spindle Speeds: 35 - 1500 rpm Spindle Mount: ISO 50 Milling Motor: 5.5 kW Connected Power: 7.0 kW Installation Dimensions: approx. L 2.0 x W 2.10 x H 2.2 m Weight: approx. 3.1 t Features • 3-axis digital display ELESTA • Table size: 1620 x 320 mm All information is subject to change without notice. A live demonstration is possible at any time in our exhibition hall. Nedpfx Aqswhm R Sjxjdc

Condition: used, x-travel 700 mm y-travel 250 mm z-travel 300 mm table-size 1000 x 230 mm spindle taper ISO 40 spindle turning speed range 35- 1500 U/min total power requirement 3,0 kW weight of the machine ca. 1,4 t dimensions 1,55 x 1,4 x 1,65 m Universal Milling Machine - Huron Head - Mounting Fixture for Huron Head Nodpfxev T Nqye Aqxjdc - Horizontal Counterholder - Documentation - Coolant System - Machine Feet

Condition: new, A robust concrete mixer with comfortable foot operation – the LESCHA SM 145 S FU is designed for regular mixing tasks on construction sites, in yards, and in industrial settings. The 500 W AC motor reliably drives the mixing drum. With a drum capacity of approximately 140 liters, the SM 145 S FU offers sufficient capacity for typical concrete and mortar work. The ergonomic handwheel with disc brake and foot operation enables stepless and controlled tilting of the mixing drum. The abrasion-resistant gray cast iron gear rim and drive pinion, as well as the robust, powder-coated construction, ensure a long service life. Highlights at a glance: * Approx. 140 l drum capacity * 500 W AC motor * 230 V mains connection * Handwheel with disc brake and foot operation * Stepless drum adjustment * Specially shaped mixing paddles * Gear rim and drive pinion made of gray cast iron * Robust, powder-coated construction * Splash-proof motor housing * Plastic wheels for easy transport Note: The mixers are stored in an open-air storage area until shipment. Minor dirt or weather residue does not constitute a defect or grounds for complaint. Dimensions (L × W × H): 132 × 71.5 × 133 cm Protection class: IP45 Drum adjustment: Handwheel with disc brake and foot operation Ndjdpfx As Abklheqxsc Sound power level LWA: 88.4 dB(A) Gear rim and drive pinion: Gray cast iron Mains connection: 230 V, 50 Hz Motor: AC motor Drum capacity: approx. 140 l Protection class: II Wheels: Plastic wheels, Ø 24 cm Power consumption P1: 500 W

Condition: reconditioned (used), Year of construction: 1999, Paper Unloader for High-Speed Guillotines – with Jogger and Bizerba Sheet-Counting Scale Automatic unloading and palletising after cutting Njdpfx Aohfhtksqxsdc Are you looking for an unloader for your guillotine, such as a Polar Transomat? This Knorr system can be used to unload your guillotine, offering a productivity-enhancing alternative to a pile lift. The Knorr unloader picks up the paper lifts using a clamp gripper and deposits them on the pallet with precise edge alignment. For this application, the unloader is positioned to the left of the guillotine. Additional application: Jogging and palletising counted paper sheets In combination with the included Knorr jogger and Bizerba sheet-counting scale, the system can also be used to stack and palletise counted batches of paper sheets. The sheet count is determined by weight using the paper-counting scale. The paper lift is then precisely aligned in the automatic jogger, and trapped air is expelled using the air-expulsion roller. The unloader picks up the prepared lift with its clamp gripper and deposits it on the pallet with precise edge alignment. The system offered comprises: - Knorr unloader with clamp gripper - Knorr automatic jogger with air-expulsion roller - Bizerba ITS industrial sheet-counting scale Please let us know how you intend to use the system so that we can discuss the appropriate integration into your production workflow.

Condition: ready for operation (used), Year of construction: 1974, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: Imatec Type: BM153-G-M3 Year of manufacture: 1974 Machine type: Tool milling machine SPINDLE Speed range: 10–510 rpm WORK TABLE Table dimensions: 1,100 × 260 mm Table slots: 3 Clamps: 2 CONTROL Digital display: 3-axis digital display, Fagor MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 1,500 mm Width: 1,500 mm Height: 1,800 mm Weight: 800 kg EQUIPMENT 3-axis digital display, Fagor Work table with 3 slots Njdpfx Aqj Ad Iwgexsdc 2 clamps

Condition: used, Year of construction: 1999, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 15 mm, height adjustment type: electric, feed rate X-axis: 20 m/min, total length: 9,200 mm, total width: 1,600 mm, overall weight: 4,000 kg, Equipment: CE marking, For sale: OTT Euromatic edge banding machine Machine data: * Year of manufacture: 1999 * Machine length: 9,200 mm * Machine weight: approx. 4,000 kg * Maximum edge thickness: 60 × 15 mm * Edge thickness up to 20 mm also possible (by adjusting the flush trimming unit) * Minimum workpiece width: 60 mm * Minimum workpiece length: 160 mm Equipment: 1. NC-controlled infeed fence 2. Joining milling unit 3. Glue application 4. Pressure zone 5. Miter saw (swivels 15°) 6. Flush trimming unit 7. NC-controlled chamfer milling cutter (0–3 mm) 8. Rounding milling cutter R2 9. Corner copying unit R2 (postforming processing possible) 10. Rounding scraping blades 11. Surface scraping blade 12. Oscillating buffing unit 13. NC-controlled upper pressure bridge Notes: * The dust extraction system is not included in the sale. * The machine will be disassembled by us and delivered to the workshop door. * Loading can be arranged upon request (not included in the purchase price). * The removal of the machine must be organized by the buyer and will be at their own expense. Nsdpfxsz S U S Io Aqxodc * Sale due to the purchase of a new machine. * Available from the 1st week of December 2026. * The machine can be inspected and tested at any time by prior appointment.

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, operating hours: 200 h, fuel type: diesel, axle configuration: 6x2, The aerial work platform was newly purchased and has only been used sparingly. It currently has approximately 200 operating hours and is in very good condition. Technical specifications: Type: DINO 210XT II Year of manufacture: 2024 Trailer-mounted articulated telescopic aerial work platform Air-cooled HATZ diesel engine, type 1B30 HD pump, 3 cm³ Cable remote control for the drive system Fixed dust box Ndodozvzz Sspfx Aqxoc Electric motor drive MyDINO Telematics included at no extra cost Data transfer for 36 months Extension of the warranty to 36 months Access to MyDINO data via app after registration Trackunit TU600-25 MyDINO Serial number: 5550404 4100 210XT Documents and accessories: Inspection book including test certificate EC declaration of conformity Proof of initial commissioning 2 operating manuals 2 maintenance manuals 1 spare parts catalog on USB stick 2 sets of keys Condition The aerial work platform was newly acquired and has only been used a few times. The operating hours are approximately 200 hours. Due to the limited use and the extensive equipment, the machine is in very good condition. Particularly interesting: Austrian type approval/individual approval, MyDINO Telematics including 36 months of data transfer, and extended warranty. Inspection is possible by appointment. Please contact us if you are seriously interested.

Condition: used, Year of construction: 1992, machine/vehicle number: 690-N, Item No. 26299 High-performance geared column drilling machine Technical data: - Drilling capacity in steel ST 60: 40 mm - Drilling capacity in steel ST 60: 45 mm - Drill spindle taper: MK 4 - Thread cutting device - Drill spindle stroke: 200 mm - 9 drill spindle speeds: 61 - 1169 rpm - 4 feed rates: 0.1 / 0.4 mm/rev - Overhang: 375 mm - Max. distance table - drill spindle: 820 mm - Table with 2 T-slots: 600 x 400 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 1.1 / 1.3 kW - Space requirement: approx. W 600 x H 2400 x D 1050 mm Nsdozzpnqspfx Aqxodc - Weight: approx. 900 kg - Includes: - Right/left rotation - Coolant system - Lighting

Condition: used, mileage: 65,996 km, power: 107 kW (145.48 HP), first registration: 04/2021, fuel type: diesel, empty load weight: 1,948 kg, overall weight: 2,995 kg, next inspection (TÜV): 09/2027, fuel: diesel, color: white, driver cabin: other, gearing type: mechanical, emission class: none, suspension: other, number of seats: 3, total length: 4,999 mm, construction height: 2,500 mm, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, sliding door, soot filter, traction control, trailer coupling, * Please schedule an appointment for a consultation or test drive by phone before your visit. This will help you avoid waiting times, and we can dedicate enough time to assist you. * Non-smoking COMFORT * Rear hinged doors without glazing * Trailer coupling * Automatic activation for headlights * Daytime running lights LED * On-board computer * Sliding door, cargo/passenger compartment, right side * Diesel particulate filter * Parking assistance, rear * Mobile office package 1 * Exterior mirrors with wide-angle view Njdpfx Aozitqfsqxsdc * Full-LED headlights with LED signature C * Airbag, passenger side * Cargo compartment partition with pass-through option * Seats in the driver's cab: Double passenger seat, convertible * Pre-wiring for anti-theft/alarm system * Wheel covers * Model revision * Body/superstructure: Box body, high roof, standard * Pre-wiring for electrical equipment * Rear fog light * Heat-insulating glazing * Radio preparation * Rev counter * Interior filter: Pollen filter * Seat covering/upholstery: Fabric * Seats in the driver's cab: Passenger seat with armrest * Seats in the driver's cab: Driver's seat with armrest * Seats in the driver's cab: Driver's seat, comfort, 3-way adjustable * Keyless entry not included * Immobilizer * Tie-down points in the cargo compartment, side * Glove compartment with cooling function * Wheelbase 3098 mm * Adjustable steering column (steering wheel) * Electronic Stability Program (ESP) * Drive type: Front-wheel drive * Battery 85 Ah * Transmission: 6-speed * Low emission according to emission standard Euro 6d-TEMP * Fuel tank: 80 liters * Start/stop system * Engine: 2.0 L - 107 kW dCi Diesel Energy * Model: TRAFIC III X82 VAN * and much more * The above information is without guarantee. It does not constitute an agreed-upon specification. Errors and prior sale are reserved. * Our services: * Financing possible, even without a down payment * Registration service * Trade-in of your old car: * Delivery possible * Tire service, winter and summer tires available at an extra cost * We also speak various languages: * English, French, Spanish, Italian, Russian, Turkish, Serbian, Czech, Croatian, Bosnian, Macedonian, Slovenian, Bulgarian, Slovak * We look forward to your visit!

Condition: used, mileage: 65,996 km, power: 107 kW (145.48 HP), first registration: 04/2021, fuel type: diesel, empty load weight: 1,948 kg, overall weight: 2,995 kg, next inspection (TÜV): 09/2027, fuel: diesel, color: white, driver cabin: other, gearing type: mechanical, emission class: none, suspension: other, number of seats: 3, total length: 4,999 mm, construction height: 2,500 mm, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, sliding door, soot filter, traction control, trailer coupling, * Please schedule an appointment for consultation or a test drive by phone before your visit. This will help you avoid waiting times, and we can dedicate sufficient time to you. * Non-smoking COMFORT * Rear double doors without glazing * Trailer coupling * Automatic activation for headlights * Daytime running lights LED * On-board computer * Sliding door, cargo/passenger compartment, right side * Diesel particulate filter * Parking assist, rear * Mobile office package 1 * Exterior mirrors with wide-angle view * Full-LED headlights with LED signature C * Airbag, passenger side * Cargo area partition with pass-through * Seats in the cab: double passenger seat, convertible * Pre-installation for anti-theft alarm system * Wheel covers * Model update * Body/superstructure: high-roof van, standard * Pre-installation for electrical equipment * Rear fog light * Heat-insulating glass Nsdpfx Aqszitqlexjdc * Radio preparation * Tachometer * Interior filter: pollen filter * Seat cover/upholstery: fabric * Seats in the cab: passenger seat with armrest * Seats in the cab: driver's seat with armrest * Seats in the cab: driver's seat, comfort version, 3-way adjustable * Keyless entry not included * Immobilizer * Tie-down points in the cargo area, side * Glove compartment with cooling function * Wheelbase 3098 mm * Adjustable steering column (steering wheel) * Traction control system (ASR) * Drive type: front-wheel drive * Battery 85 Ah * Transmission: 6-speed * Low emissions according to Euro 6d-TEMP emission standard * Fuel tank: 80 liters * Start/stop system for the engine * Engine: 2.0 L - 107 kW dCi Diesel Energy * Model: TRAFIC III X82 VAN * and much more * The above information is subject to change without notice. It does not constitute an agreed-upon specification. Errors and prior sale are reserved. * Our services: * Financing is possible, even without a down payment * Registration service * We will accept your old car as a trade-in * Delivery is possible * Tire service, winter and summer tires available for an extra charge * We also speak several languages: * English, French, Spanish, Italian, Russian, Turkish, Serbian, Czech, Croatian, Bosnian, Macedonian, Slovenian, Bulgarian, Slovak * We look forward to your visit!

Condition: good (used), Year of construction: 2000, Donau Danuflex 145 Donau Danuflex 145 high-speed radial drilling machine, year of manufacture 2000, in SUPER condition CE compliant!! Technical data: Year of manufacture: 2000 Drilling and threading capabilities Drilling capacity in steel: approx. 42 to 45 mm Threading: up to M36 Tool holder / spindle: MK 4 Spindle speed: 15 to 2,800 rpm (infinitely variable) [1, 2, 3] Travel distances & work area Outrigger travel: 1,050 mm Drilling radius: min. 540 mm / max. 1,590 mm Quill stroke: approx. 200 to 220 mm Column stroke (W-axis): approx. 450 mm Column diameter: 195 mm Table & dimensions Work table: typically approx. 1,200 x 750 mm with 5 T-slots Work table height: approx. 905 mm (ergonomic design for standing operation) Feed: automatic / stepless quill feed with electromagnetic feed clutch Equipment (standard): Threading device, hydraulic clamping for outrigger and lifting column, central lubrication and machine light Accessories and equipment: Several work tables About the machine: Offered is a Donau Danuflex 145 high-speed radial drilling machine. This high-speed radial drilling machine is in very good original condition. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Up to 3 fixed machining stations ensure maximum flexibility in the machining of workpieces, both large and small, as well as very long parts. Swivel tables allow the machining of angled bores. Large travel distances and workpiece heights up to 1500 mm are ensured. Effortless, simultaneous positioning to a drilling position in 3 axes. A self-centering spindle head positions itself precisely in centering bores. Concentric countersinking is achieved by self-centering countersinks in the bore. The guides are regularly lubricated by the central lubrication system. The Donau has been mechanically and electrically tested by us. Take the opportunity to inspect and try out the Donau on site under power. Nodpfxez Rwpyo Aqxodc You can find more drilling machines from well-known manufacturers on our website.

Condition: good (used), Polar Mohr TR 1EL 145-3 Transomat Paper Stacker The machine is ready to use. This is the most popular design from the German manufacturer. The Transomat can be placed on the left side of the guillotine. Weight: 1600 kg Power supply: 400 V Control panel. Air table. Ndodpfx Ajzz Hhueqxjc Chrome-plated table surface

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Nodpeznz Ezsfx Aqxsdc Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW • 2 sight glasses in the hopper • 2 level indicators Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Vacuum 2: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging.

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: BF17034613, Technical characteristics: Core Specifications: - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm Nsdpfx Aqexx Scljxedc - Max. Feed Speed: 30 m/min - Max. Remnant Length: 300 mm - Required Air Pressure: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features: - Guide Channel: Manually interchangeable, made from Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable every 5 mm for optimal bar support. - Remnant Management: Rear extraction with self-centering extractor or front ejection. - Repositioning System: Optional rail allows axial or radial displacement up to 600 mm for lathe access. - Automation: Fully PLC controlled, with brushless motor and digital pneumatic valves for speed and thrust control. - Bar Storage: Single-level magazine, 235 mm capacity. Bar feeder details: TOP Automazione model: FU 352 Semi-automatic Bar Feeder for Horizontal Loading to Lathe (Autonomy depends on bar diameter) Dimensions: Bar feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1200 kg Main Features and Capabilities: - Digital HMI controller for manual operations Machine status: - In working condition

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: BF17034612, Technical characteristics: Core Specifications Bar Diameter (Round): 6 mm – 50 mm Bar Diameter (Hexagonal): 6 mm – 45 mm Ndedpfxoxx Sfao Aqxec Bar Diameter (Square): 6 mm – 37 mm Bar Length Options: 1200 mm – 3200 mm Maximum Feed Speed: 30 m/min Maximum Remnant Length: 300 mm Required Air Pressure: 6.5 – 7.5 bar Operating Voltage: 230V / 50 Hz Weight: 1200 kg Design & Features Guide Channel: Manually interchangeable, made of Vulkollan-type plastic, suitable for high-speed bar rotation. Front Steady Block: Interchangeable every 5 mm for optimal bar support. Remnant Management: Rear extraction via self-centering extractor or front ejection available. Repositioning System: An optional rail system enables axial or radial displacement up to 600 mm for lathe servicing. Automation: Fully PLC-controlled, equipped with a brushless motor and digital pneumatic valves for speed and thrust control. Bar Storage: Single-level magazine with a 235 mm loading capacity. Bar Feeder: TOP Automazione Model FU 352 SX SEMI-AUTOMATIC BAR FEEDER FOR HORIZONTAL LOADING TO LATHE (AUTONOMY DEPENDS ON BAR DIAMETER) Dimensions Bar Feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1200 kg Main Features and Capabilities: DIGITAL HMI CONTROLLER FOR MANUAL OPERATIONS Machine Status: OPERATING

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: 24406, functionality: fully functional, operating hours: 900 h, input voltage: 400 V, input frequency: 50 Hz, ⚙️ IMA BIMA CUT 145/330 – Technical Specifications (Main) 🔹 Working range (axis travel) • X axis: approx. 3300 mm • Y axis: approx. 1450 mm • Number of axes: 3 (typically X, Y, Z) 🔹 Spindle • Spindle power: approx. 18 kW • Applications: milling, drilling, and board nesting 🔹 Tool changer • Automatic tool changer (ATC): up to 18 positions 🔹 Material clamping system • Vacuum table with beams and suction cups 🔹 Saw unit • Saw projection: approx. 145 mm • Cutting length: approx. 330 mm ⸻ Njdpfxsykn Dwe Aqxedc 🛠️ Typical features and equipment • 5-sided drilling (top + X+/X−/Y+/Y− sides) • Saw unit for cutting and grooving • Optional horizontal milling aggregate (HBO) • Automatic loading and unloading table (depending on configuration) • Nesting system (panel optimization with simultaneous machining) • Automatic lubrication • Waste and chips conveyor (belt) ⸻ 📌 General information • Manufacturer: IMA Schelling (Germany) • Year of manufacture commonly found in offers: approx. 2010–2016 (often 2014) • Applications: furniture production, MDF panels, HPL, solid wood, nesting

Year of construction: 2010, operating hours: 3,037 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 139737, Multivac R-145 thermoformer from 2010, in excellent condition and recently removed from production. It can be used for both soft and hard film. Film width: 420 mm. Includes 4 moulds: No. 1: 375 x 184 mm, maximum depth 100 mm. No. 2: 355 x 187 mm, maximum depth 65 mm. No. 3: 1:2, 132 x 95 mm. No. 4: 1:3, 190 x 110 mm. Built-in vacuum pump and MAP machine. Ndedpfx Ajz I Dfzsqxjc

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: BF15063528, Technical characteristics: Core Specifications: - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max. Feed Speed: 30 m/min - Max. Remnant Length: 300 mm - Required Air Pressure: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features: - Guide Channel: Manually interchangeable, made from Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable every 5 mm for optimal bar support. - Remnant Management: Rear extraction with self-centering extractor or front ejection. - Repositioning System: Optional rail allows axial or radial displacement up to 600 mm for lathe access. - Automation: Fully PLC controlled, with brushless motor and digital pneumatic valves for speed and thrust control. - Bar Storage: Single-level magazine, 235 mm capacity. Bar feeder details: TOP Automazione model: FU 352 Ndedpfx Aqjxx Si Ejxsc Semi-automatic Bar Feeder for Horizontal Loading to Lathe (Autonomy depends on bar diameter) Dimensions: Bar feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1200 kg Main Features and Capabilities: - Digital HMI controller for manual operations Machine status: - In working condition

Condition: excellent (used), For sale: Mannesmann Demag AF06-L-M-0-145-1 geared motor with a three-phase Demag ZBA90 A4 B020 motor. The unit is fully functional, tested, and ready for operation. The visual condition is good, with normal signs of use. Notes: * One mounting lug has been cut – this does not affect the operation or correct mounting of the geared motor. * There is a small crack on the plastic motor cover, which does not affect the operation of the unit. Technical data: Manufacturer: Mannesmann Demag AG Gearbox model: AF06-L-M-0-145-1 Motor model: Demag ZBA90 A4 B020 Power: 1.1 kW Supply: 3×400 V AC, 50 Hz Brake voltage: 180 V DC Rated current: 2.80 A Njdpfoz Snpzex Aqxedc Motor speed: 1400 rpm Output speed: approx. 23 rpm Gear ratio: i = 60.1 Brake torque: 20 Nm Cos φ: 0.75 Ingress protection: IP54 Insulation class: F Weight: 21.2 kg

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: BF15063530, Technical Characteristics: Core Specifications - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Max Remnant Length: 300 mm - Air Pressure Required: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features Nodoxx R Nqjpfx Aqxodc - Guide Channel: Manually interchangeable, made of Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable every 5 mm for optimal bar support. - Remnant Management: Offers rear extraction via self-centering extractor or front ejection. - Repositioning System: Optional rail system allows axial or radial displacement up to 600 mm for lathe servicing. - Automation: Fully PLC controlled with brushless motor and digital pneumatic valves for speed and thrust regulation. - Bar Storage: Single-level magazine with a 235 mm load capacity. Bar Feeder: TOP Automazione Model: FU 352 - Dimensions (L×W×H): 3500 × 800 × 1200 mm - Weight: 1200 kg Main Features and Capabilities: - HMI digital controller for manual operations. Machine Status: WORKING - Set of guide channels and accessories for bar clamping worn - Set of bearings for pusher head worn

Condition: used, Year of construction: 2014, operating hours: 182 h, functionality: fully functional, machine/vehicle number: 1404392, type of input current: three-phase, input voltage: 380 V, We are offering this used Autobond FL 106 X 145 laminating machine, manufactured in 2014, for sale. The control system was renewed in 2020. Since then, 232,314 sheets have been processed and the machine has run for 182 hours. Unfortunately, the values before the replacement were not recorded. Ndodozkkmmjpfx Aqxec Machine type: FL 106 X 145 Serial number: 1404392 Rated voltage: 380/415 + N V Patent number: Year of manufacture: 2014 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 161 kg, input voltage: 230 V, spindle speed (max.): 3,700 rpm, spindle mount: MK 2, input frequency: 50 Hz, Twister FU-200 lathe, purchased on April 13, 2021, including roughing gouges and extensive clamping accessories. Suitable for woodturning, round parts, bowls, handles, small series production, and creative workshop projects. Key technical data: - Machine type: Lathe / Woodturning lathe - Center height: approx. 200 mm - Turning diameter: approx. 395 mm - Distance between centers: approx. 715 mm, optionally extendable - Motor power: approx. 1.5 kW - Speed range: 2 belt stages, approx. 60–1350 rpm and 180–3750 rpm - Spindle connection: M33 x 3.5 with ASR Euro safety groove - Tailstock/spindle taper: MK2 - Includes roughing gouges and extensive clamping accessories as per inventory list - Rotatable and adjustable headstock for flexible machining - Attractive complete package for hobby woodturners, workshops, schools, and makerspaces Ndsdpfx Aqozuyt Rjxec No warranty

Year of construction: 2021, condition: excellent (used), functionality: fully functional, machine/vehicle number: C115101, Four CSF Inox (Italy) hygienic centrifugal pumps, year 2021, professionally decommissioned from an INEOS production facility by qualified engineers. In service for under 12 months — excellent, near-new condition. Ndsdpfjzmt Ufox Aqxec Four pumps available across three models: 1 x CS 32-110-2-1/BD — 0.75 kW, 1–12 m³/h at 1.6 bar, 1.5" tri-clamp 2 x CS 32-145-2-1.5/BD — 1.1 kW, 1–13 m³/h at 2 bar, 1.5" tri-clamp 1 x CS 50-175-2-10/BD — 7.5 kW, 1–54 m³/h at 4.1 bar, 2.5" inlet / 2" outlet tri-clamp All units: 316L stainless steel, 6-vane open impeller, EHEDG/3A hygienic design. ATEX pump II 3G Ex h IIB T4...T3 Gc with Orange1 Ex db IIC T4 Gb flameproof motors, IP66, inverter duty. Suitable for solvent, fragrance, cosmetics, food, beverage and pharmaceutical duties in hazardous areas. Available individually or as a set. Tracht Ltd supplies hygienic and sanitary process equipment. Viewings by appointment; collection and delivery can be arranged. Sold EXW Manchester, UK. Price on request. Please send an enquiry for individual quotes or a package price for the full set — we respond quickly.

Condition: good (used), Year of construction: 1990, machine/vehicle number: 14076, Offer 26143 Technical data: - Maximum turning height 165 mm - Maximum turning length 750 mm - Turning diameter over bed 330 mm - Turning diameter over compound slide 170 mm - Spindle bore 42 mm - Taper of tailstock quill MK 3 - Travel of tailstock quill 140 mm - Spindle speeds 18 - 2000 rpm - Feeds longitudinal + facing - Metric thread pitches Nedpfozdq I Rox Aqxjdc - Inch threads - Module threads - Drive 400 V / 1.5 / 2.8 kW - Including: - 2 x 3-jaw chuck - Steady rest - 4 x HSS tool holders - Various turning tools - Space requirement approx. B 1800 x H 1150 x D 900 mm - Weight approx. 800 kg

Condition: used, Year of construction: 2020, Overview Compact bottling line for craft beer, built in 2020 by CDA (Chabot Delrieu Associés, France). The B-HOP monobloc labels, fills and caps glass bottles in one stainless-steel frame, fed by a rotary infeed table and discharging onto an outfeed table. Delivered with format parts for 75 cl bottles and additional tooling for 33 cl long-neck bottles; both formats are capped with 26 mm crown caps. Output up to 700 bottles/h. The line has been dismantled and is stored ready for transport. Technical data Nsdpfx Ae Afkq Eeqxedc - Year of manufacture: 2020 - Output: up to 700 bottles/h - Product: beer - Containers: glass bottles, 75 cl and 33 cl long neck - Functions: labelling, filling, capping - Capping: crown cap 26 mm, for both the 75 cl and the 33 cl format - Electrical supply: 220 V / 16 A, 2 kW - Compressed air: max. 28 m³/h at constant 6 bar, compressor tank 200 L - Product inlet: DN40 Macon male connection at the pump inlet - Footprint: approx. 4,118 x 2,427 mm, plus door and cabinet clearance (approx. 3,254 mm deep) - Height: approx. 2,450 mm; conveyor height approx. 925 mm - Control: touchscreen HMI Scope of Delivery - Labelling, filling and capping monobloc | CDA | B-HOP | 2020 - Rotary infeed table | CDA | diameter 1,000 mm, standalone | 2020 - Outfeed table | CDA | 2020 - Format parts for 75 cl bottles - Additional tooling for 33 cl long-neck bottles, including fixed-plate roller Condition Dismantled and stored. Inspection by appointment. Availability Available immediately. Location: France.