Used Index Cnc Lathe With Drill/Mill Tool for sale (42,240)

Condition: like new (used), Year of construction: 2023, turning diameter 620 mm turning length 1500 mm control Siemens 808D spindle bore 100 mm turning diameter over slide 420 mm spindle turning speed range 10 - 4000 U/min main drive 41 kW rapid traverse speed 10000 mm/min total power requirement 65 kW weight of the machine ca. 9 t dimensions of the machine ca. 6,4 x 3,0 x 2,5 m Control unit CNC Siemens 808D new Drives/Servomotores, 24 month warranty on equipment Lrjdpfx Amolar N Njtep - Chip Conveyor - Tool cooling system - Tailstock - Tool changer (Tower) with 8 positions OPTIONAL INCLUDED - - piece support (Lunete)

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Lodpfsu Tln Nex Amterp Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Specifications Manufacturer MONFORTS Model RNC4 Year 1993 Description WE OFFER AN VERY NICE CONDITION MONFORTS CNC LATHE INCLUDING COMPLETE TOOLINGS DRAWERS FOR TOOLS MACHINE HAS LIVE TOOLS , DRIVEN TOOLS MACHINE IS CONECTED ON POWER TECHNICAL INFO: Lodpevk E A Tefx Amtorp Diameter 420 mm Distance between centers 600 mm CNC system Control System F Tools 12 positions Cross travel 250 mm Longitudinal travel 620 mm Hole through spindle 65 mm Spindle speed 70 - 4000 RPM Motor power 18,5 HP Weight 7500 Kg

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: Ledjxdmgvopfx Amtjrp CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex location: CNC tool milling machine Deckel, type FP 5–80, year of manufacture 1995, CNC control Dialog 12, universal table 750 x 520 mm. Travels X/Y/Z: 800/550/500 mm. Drive power: 9 kW. Quill stroke: 80 mm. Electronic handwheel. Spindle speeds: 32–5000 rpm. Feeds: 0–6000 mm/min. Weight: 4.5 t. Price: EUR 2,750 plus VAT, ex location. Lrsdpfjznhxhsx Amtsp

Condition: used, Universal Milling Machine DECKEL Type FP 1 Universal milling machine Lrsdsr U St Ujpfx Amtsp Machine No. 2101 – Year of manufacture: 1979 Manual travel X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 – S20x2 Spindle speed: 40–2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.5 and 1.9 kW, pole-changeable Electrical connection: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gear steps - Quill movement at the vertical milling head: 60 mm - Vertical milling head can be swiveled and extended horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant system integrated in the machine base - Standalone control cabinet - Original chip tray for mounting on the machine base - Electrical schematic available Required space (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg Good condition

Condition: used, CNC Milling Machine DECKEL Type FP 3 A Tool-tool milling machine with handwheels, also for conventional operation Serial No. 2206 - Built in 1982 GRUNDIG CNC 2101 CNC control system Travel paths X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle mount SK 40 Quill stroke 100 mm Spindle speed 25 - 2500 rpm, 21 steps Feed rate 5 - 500 mm/min, continuously variable Rapid traverse speed 1200 mm/min Spindle motor power: 2/4 kW, pole-changing Lredsv R E Rdepfx Amtep Power supply: 380 V, 50 Hz - GRUNDIG CNC 2101 CNC control system - Mechanical handwheels for all three axes - Universal tilt-and-turn table - Vertical milling head tilts and is manually adjustable by 200 mm - Hydro-mechanical tool clamping - Coolant system in the machine base - Protective enclosure at the front and sides with three hinged doors - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement: L x W x H: 1900 x 1700 x 1950 mm Weight: 1700 kg (machine 1540 kg + electrical cabinet 160 kg) Very good condition

Condition: used, Univ. universal milling machine DECKEL, Type FP 1 Machine No. 28317, Year of manufacture approx. 1960 Lredpfx Amsiy Ekvjtjp Travel distances: X: 245 mm, Y: 150 mm, Z: 340 mm Table size: 600 x 210 mm Spindle mount, horizontal: MK 4 - S20 x 2 Spindle speed, vertical: 95-1900 rpm, 12 steps Spindle speed, horizontal: 60-1200 rpm, 12 steps Motor power: 0.8 and 1.1 kW, pole-changing Power connection: 380 Volt, 50 Hz - Spindle speed controlled via 2 motor speeds and 6 gear stages - Feed in the X and Z axes - Coolant system with mechanical pump in the machine base - Quill travel on the vertical milling head: 60 mm - Vertical milling head swivels +/- 90° - Metal substructure made of angle iron with machine feet Space requirement L x W x H: 1100 x 900 x 1650 mm Weight: 650 kg Good condition

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN Type PICOMAX 100-CNC 3 CNC Control HEIDENHAIN TNC 155 Manufacturer's No. 16186651 Year of Manufacture 1986 Spindle Taper FEHLMANN SF32 Drilling Capacity Ø 30 mm in steel Thread Cutting up to M20 in steel Travel X: 850 mm, Y: 435 mm Quill Stroke Z: 210 mm Vertical Movement of Milling Head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid Traverse X and Y 8 m/min. Rapid Traverse Z 4 m/min. Table Clamping Surface 1570 x 500 mm Distance Spindle Nose - Table 130 - 720 mm Overhang Spindle - Column 450 mm Spindle Speed 50 - 7100 RPM, stepless Spindle Drive 10 kW Total Connected Load 20 kW Mains Connection 400 Volt, 50 Hz - CNC Control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z quill adjustment - hydro-mechanical tool clamping FEHLMANN SF32 Ljdpfxohik Ezs Amterp - threading device - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shutdown via adjustable cams - 3D probe RENISHAW, Type MP 11F with FEHLMANN SF32 mount - 20 tool holders FEHLMANN SF32 - swiveling tool holder with 21 tool positions - coolant system in the machine frame - control cabinet fixed to the machine - documentation: operating manual, control manual and electrical diagrams Space Required L x W x H 2350 x 2000 x 2300 mm Weight 3.2 tons very good condition

Condition: used, Univ. universal tool milling machine DECKEL, Type FP 1 Machine No. 51265, Year of manufacture approx. 1967 Travel distances X: 300 mm, Y: 150 mm, Z: 340 mm Table size 600 x 200 mm Spindle mounting SK 40 - S20 x 2 Spindle speed 40-2000 rpm, 16 speeds Motor power 1.0 and 1.6 kW, pole-changing Mains connection 380 volts, 50 Hz - Feed in the X and Z axes - Spindle speed via 2 motor speeds and 8 gear stages - Quill movement on the vertical milling head 60 mm - Swivel, rotary, and tilting angle table - Coolant pump in the machine base - Adjacent control cabinet Space required L x W x H 1100 x 1100 x 1600 mm Weight 690 kg Ledpjghtvaofx Amterp Good condition

Condition: used, CNC Tool Milling Machine MIKRON Type WF 40C/3M with Heidenhain TNC 310 CNC path control Machine No. 440911 Year approx. 1985, overhauled and control retrofit in 11/2000 Travel distances X: 600 mm Y: 600 mm Z: 460 mm Table size 900 x 550 mm Spindle taper ISO 40 Lrjdpsw A Af Isfx Amtep Distance spindle nose - table max. 520 mm Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Rapid traverse speed X and Y = 5000 mm/min; Z = 4000 mm/min Quill stroke 100 mm Main spindle drive 4 and 5 kW Power connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - CNC path control Heidenhain TNC 310, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gear steps - Vertical milling head swivels left and right - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours shown - Control cabinet permanently attached to the machine rear - Coolant system integrated in the machine base - Swiveling operator panel - Electrical diagram, control manual available Space requirement L x W x H 2300 x 2000 x 2150 mm Weight 2900 kg Good condition

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Universal Milling Machine Machine No. 2101 - Year of manufacture: 1979 Lsdpfx Amor D T U Deterp Travel (manual) X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.4 / 1.8 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gearbox stages - Quill stroke at the vertical milling head: 60 mm - Vertical milling head tiltable and horizontally extendable by 100 mm - Fixed angle table 600 x 210 mm - Coolant system in the machine base - Separate control cabinet - Original chip tray mountable on machine base - Wiring diagram available Space required (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg In very good condition

Condition: used, Year of construction: 1988, Tool CNC Milling Machine HERMLE type UWF 1000 CNC Year of construction: 1988 Travel X: 700 mm Travel Y: 550 mm Travel Z: 500 mm Numerical Command: HEIDENHAIN TNC 155 Spindle ISO 40 Spindle: Ø 70 mm Spindle speed: from 25 to 3150 RPM Lrjdozm Sphjpfx Amtjp Table size: 1000 x 500 mm Vertical sleeve travel: 100 mm Swivel head Spindle motor: 6,9 kW Weight: 3,3 T

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 2,900 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, CNC Drilling and Milling Center Donau DANUSYS 2910, Year of manufacture 2002, overhauled Technical Data: Control: Heidenhain iTNC 530 Travel distances (X, Y, Z axis): 2900 / 1000 / 700 mm Milling capacity in St 60: 300 cm³/min Drilling in solid St 60: ø 40 mm Tapping: M30 Lrsdpfx Amszlx Axetop Feed rate (X, Y, Z axis): 7 / 7 / 7 m/min Spindle: HSK 63, 15,000 rpm Coolant: internal (IKZ) and external (AKZ) Tool changer with 32 positions, divided into 2 x 16 slots Overhauled components: - Spindle fully overhauled and rewound by the manufacturer - Spindle controller repaired - Overhaul of Heidenhain power supply unit - Main computer (MC422) and control unit (CC422) checked (Heidenhain) - Carriage and guide rail of the Y-axis replaced Additional accessories: Handwheel HR 410 Chip conveyor with integrated coolant tank Documentation (operating manual, various manuals for installed components, circuit diagram, etc.) Sale ex stock; Subject to prior sale

Year of construction: 1988, condition: ready for operation (used), A Maho CNC universal tool milling and drilling machine is available. Travel X/Y/Z: 800mm/450mm/500mm, Table dimensions X/Y: 1200mm/600mm, Tool holder: SK40, Speed: 3150rpm, Feed rate: 1500mm/min, Rapid traverse: 3m/min, Quill stroke: 50mm, Resolution: 0.001mm. Machine dimensions X/Y/Z: approx. 3850mm/4400mm/2050mm, Weight: approx. 4100kg, Control: Philips CNC 432. The machine was partially overhauled in 2006. Documentation vorhanden. An on-site inspection is possible. Lredszka N Djpfx Amtep

Condition: good (used), Year of construction: 2012, 300mm max cutting diameter, 510mm mm max turned length, 51mm bar capacity, 11kW motor, Spindle speed 6,000 rpm, milling speed 6,000 rpm, Lrodpozg Eb Defx Amtsp sub-spindle speed 6,000rpm, C axis 0.001 degrees, Fanuc oi-Series Control, 3 Jaw Chuck, Tool setter, 12 Station turret, parts catcher, parts conveyor

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 10125101, turning diameter over cross slide: 340 mm, turning length: 1,000 mm, turning diameter: 595 mm, spindle bore: 64 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 260 mm, Equipment: bar feeder, chip conveyor, documentation/manual, Machined had crash 1 year ago. It was repaired by Okuma service. Changed new bed, ball srew, all original bearings, revolver repair. But main spindle runout is ~0,3mm and this was not fixed. Machine after repair was all time operational state. It could manufacture simple parts. Drill, thread, turn nice from bigger dimensions. But manufacture precise parts need additional repair of spindle to fix runout. Together with tool holders 20-30+ and chuck jaws 30+ . There are 3 active tools milling/drilling 90deg Also mist separator And bar feeder or 4000mm lenth Lrsdpfxozlarho Amtjp Chip conveyor

Condition: excellent (used), functionality: fully functional, collet bore: 200 mm, very nice EMCO metal lathe with interchangeable tool holders and a drilling and milling unit. Lodpfx Aezh Hifjmtorp

Year of construction: 2008, condition: ready for operation (used), A CNC high-speed machining center OPS Ingersoll in gantry design is available. Materials: graphite/copper/aluminum/plastics/hard machining, travel X/Y/Z: 700mm/550mm/450mm, table dimensions X/Y: 850mm/700mm, max. workpiece weight: 2000kg, tool holder to table distance range: 20mm-520mm, tool holder: HSK-E40, spindle: Fischer mW 9/10-4, speed: 42000rpm, spindle power: 17kW, spindle runout accuracy: µm, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 3200mm/2500mm/2700mm, weight: approx. 9000kg, control: Andronic 2060. Documentation available. An on-site inspection is possible. Ledpozh Nhwjfx Amtjrp

Year of construction: 1998, condition: ready for operation (used), A CNC PCB drilling and milling machine for PCB manufacturing is available. Stations: 2, Speed: 125000rpm, Collet: 3.175mm, Tool diameter range: 0.1mm-6.35mm, Working dimensions X/Y: 630mm/765mm, Positioning accuracy: 5µm, Repeatability: 4µm, Rapid traverse: 25m/min. Documentation available. An on-site inspection is possible. Ljdozhw Thopfx Amtjrp

Condition: good (used), Year of construction: 1995, CNC Universal Milling and Drilling Machine Stock number: 3101 Manufacturer: Deckel MAHO Year of manufacture: 1996 Type: MH 600W Machine number: 662106 Operating hours: 33,066 h Control system: Heidenhain Travel ranges x-y-z: 600 – 400 – 450 mm Quill stroke: 80 mm Table: 900 x 480 mm Spindle speed range: 20 to 4,000 rpm Feed rate: 1 to 4,000 mm/min Rapid traverse x and z axes: 6,000 mm/min y axis: 5,000 mm/min Spindle mount: ISO 40 Tool magazine: 16 positions Equipment/accessories: Tool changer, 4th axis, various attachments Ledpfx Amszg S Iqjtjrp Defects: Right-hand door needs to be straightened, discs on the right and left sides are missing Condition: good Connection: 12 kW Weight: approx. 3.2 t Dimensions: 2,400 x 3,200 x 1,900 mm

Year of construction: 1989, condition: used, functionality: fully functional, Lot of used machine tools Lrodpfxszg E Hyj Amtjp TRANSPORT TO BE AGREED UPON DURING PURCHASE or QUOTATION: -MT180 TRI-PHASE LATHE -INGERS 175 tri-phase LATHE -LEGOR 300 tri-phase -ANSELMI 180 tri-phase LATHE -Idroming 600 (DRM) - GRINDING MACHINE -BERGONZI FS 870 RADIAL DRILLING MACHINE -FRESA Prvomajska 1 -FRESA Prvomajska 2 -SERRMAC RAG 25/L tri-phase COLUMN DRILLING MACHINE -ITALERI Tri-phase COLUMN DRILLING MACHINE -BIMARK MOD. 30 Tri-phase COLUMN DRILLING MACHINE -Fratelli Rosa Milano tri-phase COLUMN DRILLING MACHINE -Mola Salmoiraghi tri-phase Technical details for each machine are shown in the photos. Transport costs to be determined during the quotation process. For any information, please do not hesitate to contact us. Machines intended for countries outside the EU.

Condition: used, CNC turning machine MONFORTS, type RNC 300 MultiTurn with driven tools and Y-axis Year of manufacture 2005 CNC control system FANUC Series 18i-TB Maximum turning diameter over the bed cover 380 mm Spindle bore 67 mm Spindle speed 25 - 5000 rpm Lrodpfx Amszfau Aotep Tool turret 12 stations Tool holder, cylindrical VDI 30 mm Motor power, spindle drive 23 kW Total power consumption 41 kVA Mains connection 400 volts, 50 Hz, 63 amps - with tailstock, chuck and collet chuck system - 3-jaw chuck SCHUNK ROTA NCD Ø 165 mm with a large number of chuck jaws - Collet chuck system HAINBUCH 65, without collets (only one collet as a sample) - 25 tool holders VDI 30 - 4 driven tools with collet ER 25 - Chip conveyor with integrated coolant system - approx. 20,000 operating hours Machine footprint with chip conveyor L x W x H approx. 4100 x 2600 x 2100 mm Footprint of the base machine L x W x H 3000 x 2400 x 2100 mm Weight approx. 6 tons very good condition

Condition: not inspected (used), Faceplate: 2500 mm Swinging diameter: 3200 mm Lrjdpszdk A Ujfx Amtop Max. turning height under tool: 2500 mm Max. workpiece height under support: 2780 mm Max. workpiece weight: 25 tons Cross slide: 2000 mm Ram travel, vertical: 1600 mm Ram travel, horizontal: 1800 mm Ram cross-section: 250 x 300 mm Smallest distance between two rams: 1150 mm Faceplate drive: 71 kW Faceplate speed: 125 rpm Milling drive motor: 18 kW Milling drive speed: 1600 rpm Milling drive torque: 710 Nm

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 250 mm, feed length Z-axis: 160 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 480 mm, spindle speed (max.): 9,000 rpm, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 1 m/min, spindle speed (min.): 100 rpm, quill stroke: 160 mm, table width: 320 mm, table length: 880 mm, X-500, Y-250 , Z- quill stroke 160 , W- traverse path machine head 480 , table 880 x 320 , max. 320 kg , fixture SF 32 , 100-9000 rpm , 5 kW , 60 Nm , Heidenhauin TNC 124 Many accessories Lredpfx Asq R Rb Hjmtep