Used Inpress Control Lithec System For Heidelberg Xl75 for sale (67,435)

Condition: used, functionality: fully functional, first registration: 11/2024, Year of construction: 2024, We are offering this used LITHEC LithoFlash Inline HBDM XL75 Inpress Control Lithec Heidelberg XL75, year of manufacture 2024. The Lithec system is a suitable alternative to Heidelberg’s InpressControl. Type: LithoFlash® Inline HBDM XL75 Serial Number: GG 0326 Year of Manufacture: 10/2024 The system was removed because the press it was installed in has been sold to Asia, where there is no demand for this system. Inline measurement and control system for offset printing Reduced make-ready times increase job throughput. Significant waste reduction results in direct substrate cost savings. In addition, using a measurement and control system also ensures production quality. Hnjdpfx Aeyrp Umjkrsu Application Areas • For sheet-fed and web offset printing presses with a production width of 52–205 cm • Measurement and control of process ink and special color densities • Monitoring of tone value increase, print contrast, and trapping parameters Customer Benefits • High savings thanks to LithoDyn dynamic control • Minimal energy costs due to flashing LED • Clearly structured, user-friendly interface • Definable print control strips • Effective protection against contamination thanks to innovative glass/visor system • Long service life and low operating costs Measurement Methods and Sensors • Wear-free sensor system with integrated dust and dirt protection • Density measurement in accordance with ISO standards • Parallel measurement of all density channels over the entire print width • Measurement of each sheet • 0/45° optics • Maintenance-free, long-life LED measuring light • Polarizing filter • Measuring range: 0.0 – 2.2 D • Use of existing print control strips possible • Selectable height, width, and configuration of measurement fields (minimum size 3×4 mm) • Strip library for optional use of various print control strips • Reproducibility: 0.01 D depending on measurement conditions • Line speed up to 15 m/s Scope of Delivery • Sensor crossbar • Control unit, industrial PC with 23” touchscreen • For the operation of necessary electrical and mechanical assemblies • Advanced Dust Protection (enhanced contamination protection) • LithoDyn (dynamic control) • LithoJobChange (dynamically controlled job change) • LithoFlash One Shot (measurement and control with press at standstill) Naturally, the system can also be installed on machines other than the XL75, such as: KBA RMGT Komori Manroland If you have any questions or would like further information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Heidelberg XL 75 - 4 + L X – 2019 Serial Number : LS001746 Year of Manufacture : 2019 Impression Count : 100 mio imp. 4 colors + coater offset press of size 53 x 75 cm (C-Size) equipped with: • PRINECT PRESS CENTER XL 2 • INPRESS CONTROL 2 (Inline Color and Register Measurement System) • AUTOPLATE PRO (totally automatic plate change) • WALLSCREEN XL • SPEED : Option 18.000 Sheets Per Hour • COATING UNIT with chambered doctor blade and Anilox Roller (13 cm³ per m² cells) • Extended Delivery (X2) • Infra-Red Dryer • Preset PLUS Feeder & Delivery (full automatic Size Setting) • ALCOLOR dampening with VARIO • Technotrans Central Refrigeration CombiStar with Alcosmart • Ink Temperature Control • ALL Automatic washers (blanket, rollers and impression cylinders) • Air Transfer System • FilterStar • Steel Plate in feeder and delivery (for pallets) • Chromed cylinders Hnsdpoz Du Hhofx Akreu • AIRSTAR PRO (Air Supply Cabinet) • Pneumatic compressor • PowderStar Weko AP 500 Powder Spray • Advanced antistatic device in feeder & delivery • Electronic double sheet and side lays control • Powder/process air suction CleanStar Compact • Air Cooled machine • Can print up to 0,8 mm This machine is in excellent condition and is available immediately. It can be seen running in one Print Shop in France

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Heidelberg XL 106 - 4 + LX - 2018 Year of Manufacture : 2018 Serial Number : FS002358 Impression Count : 93 mio imp. 4 colors + Coater Offset Press of size 75 x 106 cm Equipment : • High Pile Extended Delivery (X2) • Coating Unit with Anilox roller and chambered ductor Blade • Infra-Red Dryer DRYSTAR • PRINECT PRESS CENTER XL • WALLSCREEN XL • Prinect INPRESS CONTROL (Inline Color and Register Measurement System) • Heidelberg Autoplate PRO (fully automatic plate change) • Feeder & Delivery Preset PLUS (automatic Size Setting) • ALCOLOR dampening with VARIO • Ink Temperature Control • Technotrans Central Refrigeration CombiStar with Alcosmart – air cooled • ALL Automatic washers (blanket, rollers and impression cylinders) • WEKO AP 500 Powder Spray • Light-weight paper kit • FilterStar Compact • CleanStar Compact (Powder Exhauster) • Steel Plate in feeder and delivery • Chromed cylinders • AIRSTAR PRO (Air Supply Cabinet – air cooled) • Pneumatic compressor with compressed air dryer Hnsdpfxozw H Dno Akrsu • Antistatic device in feeder and delivery • SPEED : 18.000 Sheets Per Hour Fantastic machine – FULL OPTIONS ! In very good condition, very well maintained. Can be seen in production – available shortly

Condition: excellent (used), machine/vehicle number: CUTSTAR74/274, type of input current: three-phase, input voltage: 400 V, For sale: Heidelberg CutStar XL 75, an industrial roll-to-sheet feeding and cutting system designed for integration with Heidelberg Speedmaster XL 75 sheetfed offset printing presses. The CutStar system enables printing materials to be fed directly from rolls, automatically cut into individual sheets, and transferred to the printing press. This solution allows printing companies to use roll-fed materials in sheetfed offset production, helping to optimize material costs and improve production efficiency. The system is offered together with a Corona Plasma Plus surface treatment unit. Technical Specifications * Manufacturer: Heidelberg / Bielomatik Leuze GmbH + Co. KG * Model: CutStar XL 75 * Machine type: Roll-to-sheet feeder and cutter * Year of manufacture: 2011 * Serial number: CUTSTAR74/274 * Power supply: 3 × 400 V * Frequency: 50 Hz * Rated current: 52 A * Connected load: 40 kVA * Supply fuse protection: 100 A * Control voltage: AC 230 V / DC 24 V Included Equipment Hnodpfjz Ny A Hex Akrju * Heidelberg CutStar XL 75 roll-to-sheet feeding and cutting system * Corona Plasma Plus surface treatment unit * Electrical control cabinets * Associated components and accessories shown in the photographs Operating History and Condition The system was previously installed on a Heidelberg Speedmaster XL 75 printing press with over 200 million impressions. The equipment was fully operational and in very good technical condition before dismantling. The entire system was professionally dismantled by Heidelberg Polska technicians, ensuring proper disassembly and preparation for transportation. The equipment is currently dismantled, secured, and stored in our warehouse on transport pallets. Due to its dismantled condition, a live operational demonstration is not currently possible. Additional photographs and technical information can be provided upon request.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Heidelberg Speedmaster XL 75 - 4 + L X – 2019 Serial Number : LS001736 Year of Manufacture : 2019 Impression Count : Only 72 mio imp. ! 4 colors + coater offset press of size 53 x 75 cm (C-Size) equipped with: Hodpfeyt H A Rsx Akronu • PRINECT PRESS CENTER XL 2 • AXIS CONTROL 2 (Spectrophotometric colour measurement ) • AUTOPLATE PRO (totally automatic plate change) • COATING UNIT with chambered doctor blade and Anilox Roller (13 cm³ per m² cells) • Extended Delivery (X2) • Infra-Red Dryer • SPEED : Option 18.000 Sheets Per Hour • Preset PLUS Feeder & Delivery (full automatic Size Setting) • ALCOLOR dampening with VARIO • Technotrans Central Refrigeration CombiStar with Alcosmart • Ink Temperature Control • ALL Automatic washers (blanket, rollers and impression cylinders) • Air Transfer System • FilterStar • Steel Plate in feeder and delivery (for pallets) • Chromed cylinders • AIRSTAR PRO (Air Supply Cabinet) • Pneumatic compressor • PowderStar Weko AP 500 Powder Spray • Advanced antistatic device in feeder & delivery • Electronic double sheet and side lays control • Powder/process air suction CleanStar Compact • Air Cooled machine • Can print up to 0,8 mm Machine in very good condition… Available immediately Can be seen running, any print test welcome !

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, arm reach: 3,900 mm, conveyor belt length: 8,000 mm, conveyor belt width: 600 mm, product height (max.): 2,600 mm, No reserve price – guaranteed sale to the highest bidder! The machine's original price in 2021 was EUR 1,480,000 (net)! TECHNICAL DETAILS Performance and Capacity Hnedpfx Akexu Upmerou Processing capacity: 60 pallets per day Boxes per pallet: up to 54 units Maximum box weight with 54 boxes: 15 kg Overall height from top of pallet: 2,500 mm Maximum total height (including pallet): 2,600 mm Maximum total load: up to 500 kg Process Times Stacking time per box: 12–15 s Wrapping time: approx. 30 s AGV cycle time (incl. pallet change, wrapping, labeling, transport): about 4 min Transport and Material Flow AGV travel distance: approx. 70 m Number of pallet change positions: 6 Available positions during pallet change: 5 Robot Industrial robot: 6-axis articulated arm robot Payload: 120 kg Reach: 3,900 mm Availability: 99.9 % Protection class (robot): IP64 Robot control: KUKA, protection class IP54 Robot pedestal: height 1,500 mm Safety and Control Technology PLC: Siemens S7-1500 with MP 277 Touch Panel, 19" industrial PC panel Central safety control: with decentralized I/O modulation Profinet slave card: for PLC communication Safety light curtains: 1× A 1,500 mm with muting (3 for robot cell, 1 for door, 1 for wooden pallet stacking) Conveyor Technology and Pallet Handling Powered pallet conveyor: length 4 m, width 1,200 mm Pallet transfer station: GoPal E24/W for docking station Pallet station power unit: GoPal 400 / E24/W Pallet detection kit: included AGV System Transport unit: autonomous AGV GoBot GoPal E24/W Server: GoControl Operating unit: GoPal operating unit (1× call button) Interfaces: GoPal AUX Interface Box (I/O) Integration: fully integrated into AGV system Conveying Technology and Singulation Box conveying line: 17 m long, 600 mm wide Horizontal robot transfer section: 1 m Belt conveyor for boxes (new line): 8 m long, 600 mm wide Singulation system: pneumatic pusher Singulation stopper: included Pallet Stacking Systems Automatic pallet stacking system for Euro pallets: capacity 13 pallets, manufacturer e.g. Palomat or similar Automatic pallet stacking system for wooden pallets: capacity 13 pallets, manufacturer e.g. Palomat or similar MACHINE DETAILS System footprint: 5.6 m² (base area) Connected load: 38 kW Weight: 3,500 kg Note: Further information on the equipment configuration can be found in the attached specification sheet.

Year of construction: 2014, operating hours: 800 h, condition: like new (used), functionality: fully functional, We offer an automatic weighing and packaging line manufactured by BW Packaging Systems (formerly Simionato), built in 2014. The line is designed for the automatic portioning, weighing and packaging of dry food products such as nuts, dried fruits, seeds, cereals, confectionery and other free-flowing products. The machine is in excellent, like-new condition, has less than 1,000 operating hours and has been fully refurbished. It is fully operational, immediately available and ready for production. The weighing system has a capacity of up to 80 portions per minute, while the intermittent packaging unit operates at speeds of up to 40 packages per minute, depending on the product and packaging format. The combined metal detector and checkweigher shown in the pictures is available separately and is not included in the listed price. A complete maintenance history is available for every individual module of the line, including all service records and invoices. Full original CE documentation for the complete system is included, ensuring complete traceability and compliance. Hnjdpfx Aeznlbgekrou If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2014, Heidelberg XL75-4+LX Anicolor, ref. 3023 Year 2014 IR + hot air drying Hnedpfszrp Thsx Akrou Extended delivery length: 160 cm 185 million impressions Maximum sheet size: 607 x 750 mm Non-Stop feeder Non-Stop delivery In very good condition!!!!

Condition: good (used), Year of construction: 2010, Assembly machine / production line Previously, the upper and lower parts were assembled and pressed together using this device. Components include: Hnodpfx Akeglp Uyjrsu Kuka Scara KRC2sr robot, manufactured in 2010 Pneumatic control system Electrical control system with frequency inverter 4 conveyor belts Robot description: Type KR 5 scara R350 Working space volume KR 5 scara R550-Z320: 0.264 m3 Repeatability (ISO 9283) KR 5 scara R350: ±0.015 mm Reference point of working space: intersection of axes 3 and 4 Weight: approx. 20 kg Robot data sheet Control system data sheet You can find more new and used items in our shop! International shipping costs upon request! Item condition: used

Condition: like new (used), Year of construction: 2017, operating hours: 57 h, functionality: fully functional, machine/vehicle number: LS001402, FULL UV Size 53 x 75 cm, Anicolor, Wallscreen K Press Center XL 2, Alcolor VARIO dampening system, Combistar cooling and recirculation unit, Inking unit temperature control, Water-cooled machine, Autoplate PRO, Blanket wash, Roller wash, Impression cylinder wash, Coating unit, 2x UV interdeck dryer, 1 x UV end dryer, Powder spray, Extended delivery X2 module, Sheet brake, FOIL Print kit, Airstar Pro, Cleanstar Steel plate in feeder and delivery Hnodpfx Akox An Urerju

Condition: excellent (used), functionality: fully functional, controller manufacturer: Haas, Equipment: documentation/manual, 3-Axis Machining Center Manufacturer: Haas Type: VF-1 / VCE-500 Year of manufacture: 09-1998 Control system: Haas (retrofit) Operating hours: unknown Hnedpfxez Sy I Ij Akrou Serial number: 16XXX Technical data: ----- - Table size: 660 x 356 mm - Travel distances X-Y-Z: 508 x 406 x 508 mm - Spindle: max. 7,500 rpm - Spindle power: 11 kW - Tool holder: SK40 - Tool magazine with 20 stations - Coolant system - Programmable coolant nozzle - Chip conveyor - Footprint (L x W x H): 2.60 x 2.30 x 2.50 m - Weight: approx. 3.2 t Accessories: ----- - Documentation - SK-40 holder set Special features: ----- - Retrofitted with a newer Haas M17.04B control system! - In top condition.

Condition: used, Laserline Type: LPC03 Lascon laser system with Lascon controller LPC03 Laserline diode laser The diode laser ›LDM 500-60‹ has a wavelength of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 Wavelength of 935 nanometers +/- 10% Laser power: 550 W Supply voltage 100-264V +/- 10% Max. power consumption 1.7 kW Frequency 1 phase 47-63 Hz Laser class 1 Type: LDM 500-60 Lascon controller LPC03 The LPC03 has the processing power of a complete PC in a very small space. Instead of a hard drive, a removable flash disk has been installed. Due to the elimination of the hard drive and the extremely low heat generation, the LPC03 is therefore ideally suited for tasks in the field of measurement, control and regulation in an industrial environment. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also provides space for the PCI card PCI-1P. Hodpfx Akezdqkrsronu In conjunction with the LASCON measurement and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half Size CPU card Slots: 1 x PCI, length max. 180 mm Drives: none Storage medium: removable flash disk Connections: USB front; Ethernet, RS232, VGA, keypad, mouse, USB rear Housing: 212 mm x 80 mm x 250 mm (height x width x depth) Protection class: Front: IP40 Environment: 15°C - 40°C Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, LDS Dactron LDS Dactron COMET USB Shaker Control System Type: COM 200 Vibration Controller / Shaker Controller For sale is a used LDS Dactron COMET USB Shaker Control System, model COM 200. This system is suitable for electrodynamic shaker systems, vibration testing, and shock testing, including random, sine, and shock tests. Manufacturer / Model Manufacturer: LDS Dactron / Brüel & Kjaer Type: COMET USB Model: COM 200 Serial Number: 11303191 Made in U.S.A. Technical Specifications 2-channel shaker control system USB connection Power supply: 100 - 240 V Frequency: 47 - 63 Hz Current consumption: 0.5 A Suitable for random, swept-sine, and shock tests on electrodynamic vibration testing systems. Hnedpfx Akey Ugrpjrsu Software / Functions Installed software (as displayed): Shaker Control Version 8.1001 Library Version 6.3120 Unlocked module (as displayed in the software): Value Swept Sine Activated option (as displayed in the software): Real Time Data Exchange Calibration Calibration data (according to label): Calibration date: 2010-09-21 Due date: 2011-09-21 Note: The calibration has expired. Recalibration can be arranged by the buyer if required. Connections USB interface BNC connectors Power connector Other connections as shown in the images Scope of supply LDS Dactron COMET USB COM 200 Controller Power cable / connection cable as shown in the images Accessories as shown in the images Condition Used Optical condition as shown in the images Normal signs of storage and use Important note: All information has been provided to the best of our knowledge based on the images, nameplates, and manufacturer information. Shipping is possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by phone.

Condition: used, Fanuc Type: M-420I A A05B-1040-B201 / R-J3IB A05B-2474-B250 Fanuc robot with control unit Fanuc robot M-420I A The M-420iA series is the latest generation of FANUC Robotics' high-speed family of industrial robots. Based on a simple and reliable design, the M-420iA offers sophisticated motion control and consistent performance with high productivity. The series is supported by an intelligent robot controller. The M-420iA is a four-axis, servo-driven, modular robot designed for high-speed packaging and material handling. M-420iA - 4 axes of motion, 40 kg payload. Programming teach pendant Hedpfx Aezdit Tskrjnu Large work envelope with a horizontal reach of 1855 mm Repeatability of +/- 0.5 mm at full speed and full payload throughout the entire work envelope. Linear motion speeds up to 4200 mm/s. Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: good (used), FOBA FD84S sensor for YAG laser marking systems For sale is a used FD84S sensor from the manufacturer FOBA. This sensor is intended for use in YAG laser marking systems. Technical details: Manufacturer: FOBA Model: FD84S / S50 Design: Sensor / laser control component Laser class (system application): 4 Wavelength: 1064 nm Laser power (system application): 70 W Pulse power: 10 kW Hjdpfx Akexlq Exoronu Pulse duration: 70 ns Application area: Spare part / component for FOBA laser marking systems Condition: Used, functional Buy FOBA FD84S sensors and other items at affordable prices – Buy from the professional for the professional – You will find other attractive offers in our SHOP.

Condition: used, DÜRR Type: DÜRR 1K adhesive application system Dürr 1K adhesive application system with drum pump, dispenser, and heated hose (approx. 5m). Hodpfxjzgckco Akrjnu Technical machine description: Condition of the system: The drum pump, feed hoses, dispensing unit, etc., are contaminated with old adhesive and must be cleaned or replaced. The system has approximately 20 operating hours. The machine was used in a research facility. Year of manufacture: 2017 Air inlet pressure: Max. 6 bar Dimensions: Approx. 1.5 x 1 x 1.5 meters 1 adhesive control unit DÜRR (110017040) 1 single drum pump (110014004) Weight: approx. 300 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: like new (used), Year of construction: 2007, operating hours: 106 h, functionality: fully functional, color channels: 5-colour with coater, paper width (min.): 585 mm, paper width (max.): 740 mm, Great XL 75 machine in excellent condition and equipment Lacquer tower (chamber blade system) Prinect Axis Control Prinect Press Center with remote control for ink zones, ink ducts, and circumferential, lateral, and diagonal register with Job Memory Card and touch screen Alcolor Vario film dampening units with recirculation and cooling CombiStar ink unit temperature control (water-cooled) Autoplate XL fully automatic simultaneous plate changing system (plate change in 1 minute for 5 plates!!) Preset automatic format adjustment automatic ink roller cleaning device automatic blanket and impression cylinder cleaning device Hnsdpfjx S Npfsx Akrsu Grafix powder sprayer IR dryer DryStar 2000 Extended high pile delivery Standard accessories

Condition: used, BÖLLHOFF Type: 6039402 Control unit for RIVSET blind riveting system Operating voltage: 400V 50 Hz Rated current: 13A Main fuse: 20 A Control voltage: 24 V Signal voltage: 10 V Year of manufacture: 2011 with Hydac cooling unit OK-EL2S/3.0/M/400-50/1 Hnedpfx Aszgaahjkreu The system was inspected by the manufacturer and is functional. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Lauda LAUDA Heat Transfer Unit ITH350/25kW – Industrial Temperature Control Unit For sale is a high-quality heat transfer unit from the LAUDA brand, model ITH350/25kW. Ideal for industrial applications, laboratories, or production processes that require precise temperature control. Special features: Robust construction, reliable for continuous operation Precise temperature control over a wide range Protection class IP54 – dust and splash water protected Technical data: Type: ITH350/25kW Article No.: LSI 51807 Supply voltage: 400 V / 3~ / PE / 50 Hz Power consumption: 28.5 kW Current consumption: 41 A Permissible temperature [TS]: +20°C … +350°C Protection class: IP 54 Heat transfer circuit: Medium: Marlotherm SH Minimum flow rate: 1 m³/h Nominal size: DN 25 Permissible max. operating pressure: 10 bar Weight: approx. 700 kg Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) Hodpfezii T Nsx Akrsnu We will be happy to answer any further questions you may have by telephone.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, Heidelberg Stahl SBP 86, year of manufacture 2005 Machine type: Stacker / Pressing stacker Manufacturer: Heidelberg / Stahl Model: SBP 86 Technical data Maximum product width: 860 mm Minimum size: 120 × 100 mm Maximum product thickness: 4 mm Maximum stack length: 800 mm Pressing force: 8,000 N Infeed height: 360–960 mm Power connection: 400 V Control system: MCT (model-dependent) Equipment and functions - Automatic stacker for folding machines - Pressing and bundling of folded printed sheets - Uniform and clean stack formation Hnjdpfx Aoz Rkb Ajkreu - Adjustable stack sizes - Suitable for processing leaflets, brochures, and folded sheets - Can be used behind Heidelberg Stahl folding machines Machine description: Heidelberg Stahl SBP 86 stacker for the automatic transfer, pressing, and stacking of folded printed sheets. Suitable for use behind folding machines. Robust and reliable design for industrial use.

Condition: excellent (used), I am offering for sale an Agilent Technologies Systems Controller, model 86030-30011. This is an industrial computer designed to work with Agilent's measuring and laboratory equipment. The device is housed in a robust, rack-mountable metal enclosure. Inside, there is a PC equipped with, among other things, a CD-ROM drive and a 3.5" floppy disk drive. Numerous communication ports are available on the rear, allowing it to interface with laboratory devices. Technical specifications: Manufacturer: Agilent Technologies Hedpsz Sndrofx Akrjnu Model: 86030-30011 Serial number: 50860C05 Power supply: 115/230 V AC Frequency: 50/60 Hz Current consumption: 10 A / 5 A Year of manufacture: 2009 (according to the nameplate) Connectors: LAN (RJ-45) VGA PS/2 (keyboard and mouse) COM (RS-232) LPT DAS 1800 interface Additional industrial/specialized connectors Visual condition: Normal signs of use in the form of minor scratches and dirt on the enclosure. The inside of the device appears to be complete. There is a sticker indicating an electrical inspection performed in 2014. Sold without any additional accessories, cables, or software. Included: Agilent Technologies 86030-30011 Controller – exactly as shown in the pictures.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Heidelberg CX 75 - 4 + L – 2018 Year of Manufacture : 2018 Impression Count : 55 mio imp. 4 colors + coater offset press of size 53 x 75 cm (C-Size) equipped with: Hnodoz E N A Tjpfx Akrsu • PRINECT PRESS CENTER • EASYCONTROL (Color Measurement System) • AUTOPLATE (automatic plate change) • SPEED : 15.000 Sheets Per Hour • COATING UNIT with chambered doctor blade and Anilox Roller • High Pile Delivery • Infra-Red Dryer • Preset Feeder & Delivery (automatic Size Setting) • ALCOLOR dampening with VARIO • Technotrans Central Refrigeration CombiStar • Ink Temperature Control • ALL Automatic washers (blanket, rollers and impression cylinders) • Steel Plate in feeder and delivery (for pallets) • Chromed cylinders • Antistatic Device • Pneumatic compressor • Weko AP 262 Powder Spray • Air Cooled machine • Can print up to 0,8 mm This machine is in excellent condition and is available immediately. It can be seen running in one Print Shop in Germany

Condition: good (used), The following Siemens Active Line modules are for sale. There are four available. Serial number: 1P 6SL3130-7ZE23-6AA3 Manufactured in Germany. Further information can be found in the pictures. All four devices have the same design, there may be slight variations. You will find the sticker for all four devices, with the corresponding number and other data. Hnjdorunmnepfx Akrju If you have any further questions or are interested, please contact us. Shipping can be organized at any time on request.

Condition: new, Automation cabinet, control system cabinet, switchgear cabinet, Siemens SPPA - T2000 Control system and cabinet design Siemens switchgear cabinet, SPPA - T2000 AS 620B R903, Siemens 8 MF cabinet Hodpfx Akstzbdkorenu SPPA FUM R standard cabinet 6DP2623-1GG10-0XX0-Z Switchgear cabinet, Siemens sppa-t2000 8 MF cabinet AS 620 B R903 6DP2623-1GG10-0XX0-Z B15+Y88 Y88=A5E03444617 B15: with cross connection Component set for earthquake reinforcement, front and rear Double doors 2 x partition Transporting eyelets Cabinet indicator lamp Height × Width × Depth: 2200 × 900 × 400 mm Degree of protection IEC60529: IP20 Protected against solid foreign objects (diameter ≥ 12 mm), no protection against water Central section module carrier: 1 x reduced AP FUM-B-BGT: 3 x EU 903 module carrier with 2 x Profibus connection IM616 and control system monitoring with 1 x Fum210 Sys 36 fuse slots Color: RAL 7032 switchgear cabinet, Siemens Module designation Fum210/6DP1210-8BC Teleperm XP binary module Profibus connection interface module IM616 6DP1616-8BA More items in other sizes - new and used - can be found in our shop! International shipping costs available upon request!

Condition: used, Fill Type: Fill 5-axis guided CFRP trimming system, Type: SM - 03 Fill 3D ULTRASONIC CUTTER 3D ULTRASONIC CUTTER The 3D ultrasonic cutter from Fill enables three-dimensional contour trimming of fiber-reinforced plastics using ultrasound-activated cutting systems. Your advantages: Ergonomic loading and unloading Easy creation of trimming programs (NC control) Space-saving system concept (alternative to a robot) High repeatability High process stability Simple and fast tool changes Possible integration into an overall process chain The principle: The linear axis portal enables precise guidance of the ultrasonic knife with low space requirements and simple kinematics. The Siemens CNC 840 D control allows the trimming device to be programmed like a machine tool. Tool corrections or path changes can be easily performed directly on the machine. The machine is equipped with a 20 kHz ultrasonic cutting unit as standard. However, it can also be equipped with alternative systems. The knife is equipped with a separate rotary axis to cut tight radii and save other axis movements (5 + 1 axes). Technical data: Machine data Component length max. 1,000 mm Component width max. 900 mm Component height max. 400 mm Path repeatability +- 0.1 mm Positioning accuracy +- 0.2 mm Load capacity approx. 30 kg Electrical control: Siemens Sinumerik 840D sl Technical data, complete system: Hnsdpfx Akjzdy Iajrou Fill 5-axis guided CFRP trimming system, Type: SM - 03 Electricity: Mains voltage: 3 x 400 V AC Mains frequency: 50 Hz Rated current: 30 A Fuse: min. 50 A / max. 63 A Control voltage: 24 V DC Pneumatics: Quality class compressed air: according to ISO 8573-1:2010 Inlet air: 5/6/4 System pressure: min. 6 bar Supply connections Illustrations in "Connection diagram" on page 3/7. Noise: Continuous sound pressure level: 80 dB(A) Dimensions: Length: approx. 3920 mm, Width: approx. 3400 mm, Height: approx. 3500 mm Weight: Total weight: approx. 1500 kg Painting: Base frame pebble gray: RAL 7032 Cross-members pebble gray: RAL 7032 Moving parts pebble gray: RAL 7032 Control cabinets light gray: RAL 7035 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have by phone.