Used Ips Laminating Machine For Doors for sale (74,489)

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Barberan laminating machine for door frames Hodpfx Alsy Aibco Sel

Year of construction: 2009, condition: ready for operation (used), LAMINATING MACHINE FOR DOORS IPS MOD. PC-2500-SCBP Machine for the application of adhesive protective film on flat surfaces. Equipped with motorized feed with rollers and automatic cutting system. Machine for fixed height table line +/- 900 mm. Year 2009. Top and bottom gluing at the same time. TECHNICAL CHARACTERISTICS OF THE MACHINE - MINIMUM / MAXIMUM WORKING THICKNESS 15 / 50 MM - MAXIMUM WORKING WIDTH 2.400 MM - HEIGHT OF THE ROLLERS ADJUSTABLE TO THE FLOOR 840 / 950 MM Hjdpfehkr Ansx Al Ssl - TOTAL POWER CONSUMPTION 3 KW - MINIMUM AIR PRESSURE REQUIRED 6 BAR - VOLTAGE ELECTRICAL INSTALLATION 220 V - 380 V

Condition: like new (used), Thom Type SI Spout Inser­ter Machi­nes for inser­ting the spouts into pre­fa­bri­ca­ted pou­ches. Model - Thom SI‐900 Semi­au­to­ma­tic machi­ne Ide­al for sam­ple pro­duc­tion and small series pro­duc­tion Capa­ci­ty: Up to 10 pou­ches / min. Hjdpox Utd Eefx Al Sol Thom fil­ling and packa­ging machi­nes are in demand ever­y­whe­re whe­re fle­xi­ble packa­ges need to be fil­led (pou­ches / refills): in the food indus­try, the cos­me­tics and deter­gents indus­try or in the beverage fil­ling.

Condition: good (used), Laminating Machine Komfi Delta 76 Stacker Manufactured in 2016/2017. The machine is 100% operational and ready for operation. This is an advanced, high-performance machine, ideal for commercial laminating. The machine is in very good condition and ready for production. Technical specifications: Max sheet size: 760mm x 1120mm Min sheet size: 300mm x 220mm Min grammage: 115 gsm Max grammage: 600 gsm Operating temperature: 80-145°C Max operating speed: 35m/min Built-in Becker compressor Weight: 2800kg Hjdpoyur Nljfx Al Sol 380V power supply Additional air supply: 6 bar Power consumption: 18kW Pneumatic clamping, separation, and automatic feeding from a high stack, automatic stacker. Touch panel for easy operation. Sheet straightening module. Tool kit and foil included.

Condition: new, functionality: fully functional, Year of construction: 2025, travel distance X-axis: 50,000 mm, travel distance Y-axis: 4,000 mm, input voltage: 380 V, input frequency: 50 Hz, warranty duration: 24 months, Equipment: cooling unit, GS-50040LB (Bevel Cutting) Ultra-Large Format Laser Cutting Machine 40kW Bevel Cutting + 60kW Straight Cutting Dual Beam, Dual Head, Dual Ultra Ultra-Large Cutting Area: 50m × 4m Dual High-Power Cutting Heads – 60kW Straight & 40kW Bevel Cutting Precision Cutting for Ultra-Thick Plates Hedpfxsv Ng E To Al Sel Bevel Cutting Performance: ✔ Y-Bevel: 40kW | 20mm Carbon Steel | 1.4m/min ✔ K-Bevel: 40kW | 30mm Carbon Steel | 0.35m/min ✔ V-Bevel: 40kW | 50mm Carbon Steel | 0.2m/min ✔ Straight Cutting: 60kW | 150mm Carbon Steel | 0.3m/min Applications: Aerospace | Shipbuilding | Bridges | Heavy Machinery

Condition: new, Year of construction: 2024, functionality: fully functional, This powerful machine to meet the requirements of larger woodworking companies, ensuring exceptional sharpening results. Equipped with an electronic tooth counter and an autonomous cooling system. The ZM150 offers precise sharpening while maintainingoptimal operating conditions. With two electric motors, including a 150mm CBNdisk for sharpening and a motor reduction group for precise blade movement,this sharpener delivers outstanding performance. Hodsxiv Ugepfx Al Sel Power supply voltage - 380-400V Frequency - 50Hz Power - 0.20kVa Capacity - 65 teeth per min Blade width - 20 to 100 mm Tooth pitch - 6 -25mm Sharpening disc - Profiled 150mm CBN disc Weight - 115kg

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Hedpfx Aoxlfwpel Ssl Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Hjdpfx Aoxligujl Sol Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: new, functionality: fully functional, Year of construction: 2025, The VSI (Vertical Shaft Impactor) sand making machine is a type of crusher designed to accelerate the crushing of aggregate and produce cubical-shaped sand. It is widely used in the field of construction, mining, and other similar industries. Here are key features and information about VSI sand making machines: Hjdoq Nd U Hepfx Al Sjl 1. Working Principle: - The VSI sand making machine operates on the principle of stone impacting stone or stone impacting iron. Material is fed into the center of the rotor, which accelerates to high speed to throw the material outward against a wear-resistant lining. 2. Rotor and Crushing Chamber: - The rotor is a crucial part of the VSI machine and is often designed with multiple pockets to facilitate material throwing and crushing. - The crushing chamber is lined with wear-resistant materials to endure the impact and abrasion during the crushing process. 3. Feedstock Control: - The feedstock (material to be crushed) can be controlled using a variable speed control system, allowing for adjustments to achieve the desired particle size. 4. Material Types: - VSI machines are suitable for processing various materials, including hard and abrasive materials such as rocks, ores, and minerals. 5. Cubical Shaping: - One of the significant advantages of VSI machines is their ability to produce cubical-shaped end products, which is desirable for high-quality concrete and asphalt production. 6. Adjustable Discharge: - The machine usually has an adjustable discharge opening, allowing for customization of the final product size. 7. Sand Production: - VSI sand making machines are primarily used to produce manufactured sand (M-sand) and crushed sand, which are essential components in the construction industry. 8. Maintenance: - Regular maintenance is required to ensure optimal performance and extend the machine's lifespan. This includes checking wear parts, lubrication, and addressing any issues promptly. 9. Variations: - Different manufacturers may offer variations of VSI machines with unique features or specifications. Common variations include open rotor and closed rotor designs. 10. Environmental Considerations: - VSI sand making machines are generally considered environmentally friendly as they produce less dust and noise compared to traditional crushers. 11. Manufacturers: - Well-known manufacturers produce VSI sand making machines, and it's crucial to choose a reputable supplier with a track record of providing reliable equipment. When considering a VSI sand making machine, factors such as feed size, capacity, and the desired end product specifications should be taken into account. Additionally, check the reputation of the manufacturer, and consider customer reviews and feedback regarding the specific model you are interested in.

Condition: ready for operation (used), functionality: fully functional, Rotary die cutter in very good condition, hardly used. Hedpfx Alexz Tn Ue Sel Contact details of a highly reputable die manufacturer can also be provided.

Condition: used, Year of construction: 2008, GENERAL TECHNICAL DATA: Performance Mechanical speed: up to 450 m/min Production speed: depending on substrates and adhesive system Web & Dimensions Maximum web width: 1330 mm Maximum laminating width: 1315 mm Minimum web width: 600 mm Roll Specifications Maximum roll diameter: • Unwinder: 1000 mm • Rewinder: 1000 mm Core diameters: • Unwinder: 3” / 6” (76 / 152 mm) • Rewinder: 6” (152 mm) Web Tension Unwinding: 500 N Rewinding (with taper tension): 550 N Electrical Data Voltage: 3 × 400 V ±10%, 50 Hz (without neutral) Total installed power: 85 kW Maximum input current: 120 A Hodpfx Aey Er A Ujl Sol Main switch: 150 A Pneumatic Requirements Pressure: 6 – 9 bar Consumption: 70 l/min Feed connection: 1/2” Hydraulic System Pressure: 3 bar Cooling consumption: up to 2700 l/h Feed connection: 1/2” Cooling System Water pressure: max. 5 bar Water temperature: 15–20°C Temperature difference: 4°C Pressure difference: 2.5 bar Flow rate: 2000 l/h Machine Configuration • Shaftless unwinder (primary & secondary) • Shaftless rewinder • Automatic web guiding system • Adhesive metering system (5-roll application unit) • Laminating unit with pressure rollers • Cooling calender • PLC-controlled drive system • Touch screen control interface Materials (Supported) • Aluminium (ALU) • BOPP • LDPE / LLDPE • Nylon (Cast) • OPA • PET / PETP • PP (Cast) • Paper Material Thickness Range Films: approx. 7 – 200 µm (depending on material) Paper: 40 – 200 gsm Working Conditions Temperature: 10 – 40°C Humidity: 30 – 90% (non-condensing) Additional Equipment • Optional water chiller: approx. 21 kW cooling capacity • Closed-loop cooling system possible Control & Automation • PLC control system • Inverter-driven motors • Recipe storage (up to 500 jobs) • Production monitoring (speed, meters, tension) • Emergency stop system

Condition: good (used), D&K Europa System B2 Laminator The machine is 100% operational and ready to use. This advanced, high-performance machine is ideal for commercial laminating. Technical specifications: Max sheet size: 540mm x 740mm Min sheet size: 210mm x 220mm Min weight: 115 gsm Max weight: 400 gsm Operating temperature: 80-145°C Weight: 750 kg 380V power supply Chrome-plated steel cylinder Pneumatic clamping, separation, and automatic high-stack feeding. Sheet feeding accuracy: ±2.0mm. Touchpad for easy operation. Sheet straightening module. Sheet discharge jogger. Hedpfxey Hgkio Al Ssl

Condition: good (used), Mobile delivery for folding machine Heidelberg SAK-66 Fully operational, ready for production. Manufactured in Heidelberg, Germany. Hjdoy Ehknspfx Al Sel Brand new belts. Can be connected to any Heidelberg folding machine, with smooth delivery speed adjustment. Height and angle adjustment.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, type of input current: AC, Equipment: compressor, Foliant VEGA 400a Fully Automatic Laminating Machine Hedpfxoyxyzrj Al Sol

Condition: excellent (used), Overview Now in stock at Glendale we have this Refurbished Foliant Vega 400A Automated Laminator with Digital Foiling. This B3+ laminator has been fully refurbished to excellent working condition and is designed for heavy duty digital output and B3 litho lamination. The Vega 400A is a compact industrial laminating machine capable of speeds of up to 18 metres per minute, producing over 2,000 SRA3 sheets per hour. It features a deep pile vacuum feeder, high speed bump separator, and non-stick pressure roller, ensuring reliable feeding and consistent lamination quality across both digital and offset printed sheets. The system includes an adjustable twin decurl unit for offset and digital prints, a digital foiling module for foil, holographic, glitter, and spot-UV style finishes, and the optional jogger reception unit for neat sheet delivery. The integrated pneumatic compressor allows the machine to operate without any external air supply, making it a versatile and compact finishing solution. The system has seen light use within a small digital printing operation and has processed under 75,000 laminated sheets since new. Key Features Rising pile vacuum feeder with belt head Built-in Becker vacuum pump Quick change film shaft with tension control Film capacity up to 3000 metres (22–42 micron) Inline trim slitter and perforating wheel Twin adjustable decurl system Heated chrome laminating roller Pneumatically adjustable pressure High speed bump separator Touchscreen control system Optional jogger reception included Why Buy the Refurbished Foliant Vega 400A? The Refurbished Foliant Vega 400A provides a highly productive and versatile laminating solution for print businesses producing both digital and offset work. Key benefits include: Production speeds of up to 18 metres per minute Output of over 2000 SRA3 sheets per hour Integrated digital foiling capability for premium finishes Twin decurl system for digital and litho prints Integrated compressor – no external air supply required Compact industrial footprint Fast warm-up time of under 10 minutes Optional jogger delivery included This system allows printers to produce high quality laminated products while also adding premium finishing effects such as digital foil and decorative lamination. Hodpfx Aeyxp Nxsl Sol Specifications Manufacturer Foliant Model Vega 400A Max sheet size 380mm x 660mm Min sheet size 200mm x 200mm Paper weight 115gsm - 500gsm Max speed 18 metres per minute Laminating roller pressure Pneumatic Feeder Automatic Suction Vacuum Belt Seperator Automatic bump rollers Decurl bar Standard - in run adjustable Air compressor Integrated as standard Warm up time 8 minutes Temperature range 80 - 140°C Jogger reception Included Power requirement 230/240v 50/60Hz Machine weight 370kg Machine dimensions with jogger (L)1980mm x (W)820mm x (H)1230mm

Year of construction: 2009, condition: excellent (used), functionality: fully functional, Foliant Gemini 400G Automatic Laminator Hodpfsvrd E Aex Al Sel Fully Automatic Digital Print Laminating Machine. Deep Pile Auto Feeder - 300mm Paper stack capacity Max sheet size B3 (380mm wide) Max production speed 15 m/min ( 1,800 x SRA3 sheets per hour) Built-in compressor for high-pressure laminating rollers. Auto-control for miss-sheet detection and quality control. Large roll film capacity. (up to 3,000 m) In-line sheet separation. Delivery into a paper jogger 220/240 volt - 50Hz

Condition: ready for operation (used), * Brand: Metso /CFBK * Model: screening machine for wet screening * Stock: 2 pieces * 1x Type: 20/60-3 Hodpsyymydsfx Al Sjl * Surface : 6000 x 2000 mm - 3 decks. * incl.: springs and 22 kW E-motor. * 1x Type: 17/50-3 * Surface : 5000 x 1700 mm - 3 decks. * incl.: springs and 15 kW E-motor.

Condition: excellent (used), functionality: fully functional, Thermal laminating machine complete with: Automatic Feeder, Pneumatic Pressure Roller, Pile Delivery, Jogger Hodoyyyraepfx Al Sjl

Condition: excellent (used), Year of construction: 2009, operating hours: 110 h, functionality: fully functional, type of input current: three-phase, overall weight: 3,500 kg, Coating and laminating system. For paper and film. Rewinding and unwinding with automatic web edge and web tension control. Laminating unit is cooled. Max. 30 m/min. Working width 650 mm. The machine was only used in the laboratory for tests. Only 110 operating hours since new Hotmelt or dispersion can be used. Hotmelt is melted in a separate extruder and fed to the application unit via a heated hose. Roll or reverse roll is possible. Powerful IR dryer . Exhaust air system and cooling unit can be included. Ma. Roll diameter 800 mm. Core 3 1/2 ". Pneumatic winding shafts. Hsdort Iqbspfx Al Ssl

Condition: ready for operation (used), * Brand: Flämrich Hsdpfeywndfox Al Sel * Model: screening machine for fine materials * Surface: 1600 x 600 mm – 1 deck * Driving: 4 kW E-motor

Condition: ready for operation (used), * Brand: Eirich Hodpfx Aeywmuvel Ssl * Model: screening machine for fine materials. * Surface: 3000 x 1600 mm – 1 deck * Driving: 4 kW E-motor * On stock: 2 pieces.

Condition: good (used), functionality: fully functional, Very well preserved laminating machine, working width 65cm Hedpfx Aovxvarjl Sel

Condition: excellent (used), Year of construction: 2020, Complete filleting line. Includes a Baader IS-026 heading machine with take off conveyor. Into BADDER 588 filleting line Working range (approx.) Hodpfou Dahbjx Al Ssl Cod: 400–2,500 g / 35–70 cm Haddock: 400–2,300 g / 35–65 cm Saithe: 400–2,000 g / 35–62 cm Hake: 160–800 g / 20–47 cm Alaska Pollack (h+g): 150–450 g Throuput Up to 35 fish/ to 40 fish/min. With trimming / packing conveyors. Video is available of the complete line running on request

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, input voltage: 230 V, type of input current: three-phase, working height: 150 mm, We offer this very well-maintained SCM Multiflex C window and door machining center, year of manufacture 1995. Purchase date: June 1995 Tenoning carriage power: 15 hp Profiling spindle power: 10 hp each Tenoning spindle height: 320 mm Profiling spindle height: 320 mm Hsdpfsyvhnuex Al Sel Electrical connection: 3x230 V Glazing bead recovery system The machine is still in very good working order. It has had only one owner throughout all these years, used exclusively in a family carpentry workshop (father and son). Therefore, the machine is certainly not worn out. Reason for sale is the modernization of the machinery fleet. A new SCM corner joint machine has been acquired. The machine remains fully operational and can be inspected and tested until June. All features and functions are still intact. Sold without tooling (cutters).

Condition: ready for operation (used), Year of construction: 2004, ➢ Speed 10-80 m/min. ➢ Minimum Sheet Size: 22 x 30 cm ➢ Maximum Sheet Size: 72 x 102 cm ➢ Sheet Production: >10.000/h ➢ Sheet Weight SF: 100-600 g/m2 ➢ Adhevise Application SF: 1.5 – 4.0 g/m2 ➢ Working Width 72 cm ➢ Film Thickness 10-50 µM Hsdpfx Asyzcikjl Sol ➢ Film Roll Diameter 350 mm ➢ Energy Consumption 24/66 kW ➢ It is Very Good Condition ➢ Available Immediately.