Used Iq Flatman Tft Display for sale (9,249)

Condition: used,

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 8,000 kg Lifting height: 4,050 mm Fork length: 2,400 mm Mast: Duplex mast, free-lift mast without a central hydraulic cylinder Hydraulics: 3rd and 4th valve Fork adjustment: Hydraulically adjustable Side shifter: Present MACHINE DETAILS Manufacturer: Linde Type: H80/900T Year of manufacture: 2019 Drive type: LPG Operating hours: 16,052 h Own weight: 13,860 kg Overall length: 6,350 mm Overall width: 2,300 mm Overall height: 3,380 mm Front tires: Dual tires EQUIPMENT Nledpfx Abs Ad N A Ds Rjh Fork positioner with side shifter Multiple pallet fork Full cabin Air conditioning Heating Windshield wiper Roof window LED work light (front) LED work light (rear) Safety light (front) Safety light (rear) Comfort seat with lumbar support Seat heating LPG gas tank Color display Tilt angle indicator Lot number: 13 Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Nlsdpfxjz R Dyfe Ab Rsh Load Capacity Load capacity: 1,600 kg Mast Mast type: Duplex mast with full free lift Lifting height: 3,140 mm Free lift: available Forks Fork length: 1,200 mm Hydraulics 3rd hydraulic valve: available 4th auxiliary valve: available, prepared for fork positioner Side shifter: available Electric Drive Drive type: Electric Battery: 48 V, 6 PzS, 750 Ah Battery year of manufacture: 2021 Battery voltage in idle state: 50.2 V MACHINE DETAILS General Manufacturer: Linde Type: E16L Year of manufacture: 2020 Operating hours according to display: 14,963 h Own weight: 3,200 kg Dimensions Overall length: 3,300 mm Overall width: 1,100 mm Overall height: 2,100 mm Inspections and Service Service valid until: 09/2027 UVV (German accident prevention regulation) valid until: 09/2027 Previous owner: former Linde full-service unit EQUIPMENT Side shifter Semi-cabin Windshield with wiper LED work light, front LED work light, rear Comfort seat with lumbar support Seat heating Battery charger 4850, year of manufacture 2026 All dimensions are rounded values. No guarantee is given for typing or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 183

Condition: used, machine/vehicle number: H2X386V04438, Year of construction: 2019, operating hours: 22,572 h, load capacity: 1,800 kg, lifting height: 6,075 mm, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,800 kg Lifting height: 6,075 mm Fork length: 1,200 mm Fork adjustment range: 350–1,050 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Drive type: Electric Battery year of manufacture: 2023 Battery voltage: 48 V Battery type: 5 PzS Battery capacity: 625 Ah Measured idle voltage: 50.8 V Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,150 x 2,671 mm Own weight: 3,800 kg Service valid until: 07/2027 UVV valid until: 07/2027 Operating hours: 22,572 h EQUIPMENT Former Linde full-service unit Facelift model Display of the tilt angle Lateral fall-through guard, easily removable White, non-marking tires LED work light at the front LED work light at the rear Road traffic lighting with turn signals Comfort seat with lumbar support Nljdpfx Aoz Nyhvob Reh Seat heating 3rd and 4th hydraulic function Fork positioner Side shift All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 t is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible at a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 222

Condition: used, functionality: fully functional, Leary LS-4R Glue Application & Quality Control System (iQ Enabled), with Array module, Quantum glue valve, and Leary ejector. ###Identification Model: LS-4R Serial number: 20406 Part no.: 00140010, Rev. 16 CE marked, iQ enabled ###Configuration (as visible) Leary Array module mounted on an overhead gantry Leary Quantum glue valve with product detection sensor Central glue distribution manifold with 8 outlets, plus a purge valve and pressure gauge Leary PS9 sensors and Leary Quad sensor Leary ejector motor starter for automatic rejection Operator touchscreen display (Leary/Array) Column-mounted control cabinet with overhead gantry and signal tower Pneumatic piston glue pump on a mobile floor stand, with an inline glue filter and filter/regulator/lubricator for air preparation Separate electrical junction box with a complete cabling set Operating instructions for the PS9 sensors on the machine (in Dutch) Njdpe Afwpbjfx Ab Relh ###Note The buyer is responsible for disassembling the system; no tools are provided. The system is still connected to power.

Condition: used, machine/vehicle number: H2X393V02496, Year of construction: 2019, operating hours: 17,217 h, load capacity: 3,500 kg, lifting height: 4,450 mm, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,500 kg Lifting height: 4,450 mm Fork length: 1,200 mm MACHINE DETAILS Mast type: Duplex mast Operating type: LPG Dimensions & Weight Nsdpez Nwugefx Ab Rjlh Dimensions (L x W x H): 4,100 x 1,350 x 2,964 mm Self-weight: 4,900 kg UVV certificate valid until: 04/2027 Next service due in: 388 hours Operating hours: 17,217 h EQUIPMENT Former Linde full-service unit Free-lift mast without center hydraulic cylinder Multi-directional fork positioner Side shifter Full cab Radio Heater Windshield wiper LED work light (front) LED work light (rear) Safety light (rear) Safety light (side) Comfort seat with lumbar support Seat heating Display of the tilt angle LPG gas exchange cylinder Hydraulics: 3rd + 4th valve All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 t is possible with a large forklift on site. Loading is carried out at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 166

Condition: ready for operation (used), functionality: fully functional, operating hours: 11,450 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 4,095 mm Fork length: 1,200 mm Mast type: Triplex (?) Hydraulic valves: 3rd and 4th valve Number of wheels: 4 MACHINE DETAILS Manufacturer: Linde Type: E30 HL Year of manufacture: 2020 Drive type: Electric Operating hours: 11,450 h Own weight: 6,300 kg Overall length: 3,800 mm Overall width: 1,300 mm Overall height: 2,724 mm Battery Battery voltage: 80 V Battery capacity: 775 Ah Battery manufacturing date: Week 23/2020 Measured battery voltage: 82.3 V Nodez R Dv Tepfx Ab Rolh Inspections and Maintenance Service valid until: UVV (Occupational Safety) valid until: EQUIPMENT Hydraulic fork positioner Side shifter Tilt angle display Facelift model Former Linde service unit All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is carried out at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In case of delayed collection, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 103

Condition: good (used), Year of construction: 2009, Position computer, computer, control unit, robot control, control, CNC control, control panel, computer monitor, screen, TFT industrial monitor -Manufacturer: Grenzebach, computer with monitor -Computer: BR Elektronik Type Mini PC 8000 -Monitor: IQ Automation Flatman TFT display type FK170SBRGD001 -Individual components: see photos -Number: 2x computers with monitor -Price/Distribution: per unit -Transport dimensions: 480/400/H210 mm Nsdpfxovn I Dne Ab Rjlh -Weight: 13 kg/piece

Condition: like new (used), Year of construction: 2024, operating hours: 200 h, functionality: fully functional, grinding length: 600 mm, grinding width: 400 mm, workpiece weight (max.): 1,000 kg, grinding height: 430 mm, grinding wheel diameter: 405 mm, table load: 1,000 kg, grinding wheel width: 50 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 500 rpm, grinding spindle motor power: 7,500 W, warranty duration: 12 months, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, First commissioning: 2024 Operating hours "grinding wheel in use": approx. 100 hours The machine will be completely inspected by the manufacturer OKAMOTO and delivered with an acceptance protocol for the geometry. Manufacturer's warranty: 12 months for delivery within the European Union and commissioning by T-Rade Service GmbH (commissioning optional in Germany: EUR 7,900, EU EUR 9,800) Design: Column feed Control: Fanuc Screen: Touchscreen Nlodpfjz Hc Sdjx Ab Rsh Workshop programming: for flat, groove, and step grinding (optional) Conventional operation of the machine possible (manual operation) Automatic multiple plunge cuts Teach-in functions: vertical, dressing, and reversing points Folding dresser with 3 diamonds next to the magnetic clamping plate Automatic compensation of dressing amount Longitudinal guides: double prism, hand-scraped with thermally symmetrical behavior, PTFE coated Maximum table load: 1,000 kg Hydraulic table drive X-axis Electric servo table drive Z-axis Electric servo grinding spindle drive Y-axis Travel in longitudinal direction: 950 mm Travel in transverse direction: 440 mm Travel table-new wheel (Ø 355 mm): 522 mm Grinding wheel standard: Ø355x38 mm Grinding wheel Ø max.: 405 mm Grinding wheel width max.: 50 mm Grinding wheel bore: Ø 127 mm Grinding spindle drive power: 7.5 kW Grinding spindle speed, infinitely variable: 500-2500 rpm Leveling screws and support plates Operating/programming/maintenance manual, operating tool LED lamp Machine paint: Dark gray/silver structure Machine dimensions approx. L x W x H: 3,560 x 2,900 x 2,210 mm Weight approx.: 4,950 kg Connection value: 15 kVA Accessories: Folding dresser with automatic compensation Coolant flushing gun Flanges 1 piece Grinding wheels 1 piece Commissioning and training by OKAMOTO is mandatory for the warranty. Optionally available: Electro-permanent magnet, transverse pole: 800x400 mm, p=13 mm, extra charge EUR 9,000.00 Band filter tank: 180 liters, extra charge: EUR 9,000.00 All information is non-binding, subject to prior sale. The machines remain our property until full payment. Our general terms and conditions apply. Delivery: ex works Delivery date: upon agreement (approx. 8 weeks) Prices: plus VAT Payment terms: strictly net, 10% with order, 90% before shipment The price for the machine as stated is valid only in Germany. Other EU countries at an extra charge upon request. No export of the machine.

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 403, THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool (PRICE FOR TOOLS: € 2.500.- / FOR EACH TOOL): Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Vending machine cup capacity/capacity/contenance=223ml 593 // 460 // 8 // Coffee-to-go / thermo mug / thermo cup Filling capacity / Capacity / Contenance=300ml / 12 oz 509 // 452 // 6 // Ice cream cup: filled to the brim=140ml / Nlodpfx Abon D Ew Is Rjh Filling capacity with headspace 6mm: 120 ml 591 // 459 // 10 // Thermo mug ⌀ 81/180ml 740 // - // - // Standard cup with sealing edge ⌀ 75-120ml 3589 // 458 // 12 // Coffee-to-go / thermo mug / thermo cup: Filling capacity / Capacity / Contenance=80ml 595 // 456 // 10 // Vending cup / Gobelet pour automate: Filling capacity / Capacity / Contenance=150ml 210 // - // - // Baking case / technical part / plate or tray 8000 // 455 // - // Granule cup 180 ml / technical part with flat sealing edge

Condition: used, Manufacturer: Bosch Rexroth Product series: IndraControl V Type: VDP40.3BIN-D1-NN-MX Part number: R911171444 Device type: Operator panel / HMI Njdpszcgv Nefx Ab Rolh Display size: 15 inch TFT Resolution: 1024 × 768 pixels Membrane keypad: Integrated USB interfaces: Available Supply voltage: 24 V DC Degree of protection (front): IP65 Degree of protection (device): IP20 Bosch Rexroth IndraControl V operator panel VDP40.3BIN-D1-NN-MX – R911171444 Used, functionality not tested.

Condition: like new (used), Year of construction: 2016, operating hours: 500 h, functionality: fully functional, spindle speed (max.): 24,000 rpm, Gravograph IS 6000 IQ – CNC engraving machine – approx. 500 operating hours For sale is a very well-maintained Gravograph IS 6000 IQ with only approx. 500 operating hours. The machine is suitable for engraving and milling operations, for example, for the production of signs, lettering, and custom engravings. Machine data: Manufacturer: Gravograph / Gravotech Model: IS 6000 IQ Year of manufacture: 05/2016 Operating hours: approx. 500 Condition: used, very well maintained Equipment: Engraving software GS8-GRAPHIC incl. dongle Sturdy machine table with T-slots for workpiece clamping Matching base frame Wired hand control unit Extraction system on the machining head Spraying device 750 W high-frequency spindle kit for the IQ series according to the order confirmation from November 2017 The machine was purchased in December 2016. Its excellent condition and low usage with only approx. 500 operating hours are particularly noteworthy. Price: net 12,500 EUR Location: 09627 Bobritzsch-Hilbersdorf Availability: immediately Nljdpfoz D Htgjx Ab Rsh If you are interested, we look forward to receiving your inquiry.

Condition: used, Year of construction: 2023, operating hours: 1 h, MULAG Combination Mowing Device MKF 600 for Mounting on Unimog Mowing combination MKF600 consisting of: - Front boom mower MFK 500 - Verge mower MRF Base unit for single or dual-operator use, designed for front mounting plate size 5 with the following specification: Equipment Front Boom Mower MFK 500 * Designed for right-hand operation * Boom swivel range: 190 degrees * Hydraulically actuated collision protection with damping of the boom system via hydraulic accumulators * Hydraulic lateral shift of the boom by 1300 mm (in combination operation) / 1800 mm (in solo operation) * Float position of mowing units can be switched on/off * Quick-change device for mowing units * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve * Operating hours counter * Proportional mlcontrol permanent hydraulics included * (CAN bus technology) for the boom, including dual-cylinder actuation (multiple functions may be performed simultaneously) * Boom relief regulation type AER with stepless ground pressure adjustment via potentiometer, can be switched on/off * Operator information system with TFT color display, including system monitoring and diagnostic support * Multifunction lever mlbasic single-handed control unit with multifunction lever (ergonomically designed for right hand use, 4 functions on one plane. All functions are proportionally controllable) * Combination control panel * Control of both units via multifunction control lever * Oil cooling system with electric temperature monitoring included * Tool drive via front PTO * Hydraulic pump for 1st implement drive 62l / 340 bar * Hydraulic pump for 2nd implement drive 50l / 280 bar * Filled with Panolin HLP Synth, fully synthetic, rapidly biodegradable hydraulic oil * Telescopic boom system hydraulic adjustment for extending reach by 1,000 mm * Reach 6.50 m from vehicle center in combination operation * Reach 7.00 m from vehicle center in solo operation Njdpfxj Abkhpo Ab Rjlh * 2-way electro-hydraulic switching valve controlled from operator panel (additional hydraulic dual functions) * Hydraulic rotation device for mowing implements, swivel range of 230°, operable from control panel. Boom side integrated, including quick-change plate * Hydraulic couplings: Quick coupling kit for flat-sealing quick couplers on mower * Cable set ES6 Front Unimog Connection of operator panel via universal electrical interface ES6 of Unimog * Hydraulic stabilizer legs included, 2 pieces, height adjustable * LED work lights, 2 pieces, mounted on boom * High-pressure water hose routing on boom Verge Mower MRF 350 consisting of the following configuration: Verge Mower MRF 350 * For right-hand operation * Reach 3.50 m from vehicle center * Hydraulic lateral adjustment of verge mower by 1000 mm (in combination operation) * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve (knife shaft overrun limited to approx. 4 seconds) * Operating hours counter * Sensing automatic: control of the mowing head around obstacles. Mowing speed adjustment for evasive movement is steplessly adjustable by the operator at the control panel. * Single-hand operation unit with holder in Unimog Verge Mowing Head RMK 1200 * Working width: 1200 mm, Cutting thickness: max. 10 mm * MS-R blade * Knife shaft speed: approx. 3000 rpm * Standard sensing arm Mowing Head MK 1200 plus * Working width: 1200 mm, Cutting thickness:

Condition: new, Inspection camera micro CA-350, 3.5 inch, 640x480, 17mm LED, 4-cable, length 900mm, RIDGID Nljdpfxj Ab Dm Eo Ab Roh · With the option to record images and videos · Lightweight and compact design · Ideal for inspecting hard-to-reach or view areas · Such as boiler and supply lines, engine and machine parts that can only be accessed through small openings. Technical specifications: Cable length: 90 cm (extendable up to 9 m with optional extensions) Camera head: Aluminum, 17mm diameter (camera head and cable are waterproof up to 3 meters) Illumination: 4 adjustable LEDs Image rotation: 4 x 90° (360°) Viewing distance: 10 mm to ~ Field of view: 72° Photo format: Resolution 640 x 480, JPEG Video format: MP4 - Resolution (320 x 240) Frame rate: up to 30 FPS TV output: PAL / NTSC - selectable Internal memory: 235 MB External memory: SD card, max. 32GB (4GB included) Data output: USB data cable and SD card Power supply: 12 V Li-ion battery Weight: 2.5 kg (including battery) Audio recorder: yes, integrated (including headset) Accessories: Hook, magnet, and mirror (included) · Other technical features: Weight: 0.9 kg · Storage medium: SD card Camera head diameter: 17 mm Display size: 90 mm / 3.5" color TFT, resolution 320 x 240 Cable length: 90 cm

Condition: as good as new (ex-display), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 0153, Specification Europa VS660 Centre height 330mm Distance between centres 1500mm Swing over bed 660mm Swing over cross slide 430mm Spindle bore (max. bar dia) 104mm Spindle nose mounting D1-11 Camlock Taper in spindle bore No. 7 Morse Swing in gap 860mm Width of bedways 480mm Total travel of cross slide 390mm Total travel of top slide 190mm Total travel of tailstock barrel 300mm Spindle speeds (infinitely variable) 18 – 1400rpm Drive vee belt and clutches Spindle motor 20HP Imperial pitches (73) 2-84TPI Nsdpfx Aonxi H Usb Rslh Diametral pitches (27) 8-72DP Metric pitches (51) 0.2 – 14mm Module pitches (20) 0.2 –3.5 MOD Approx. weight 3800 kg Machine in Imperial execution Europa VS660 Gap Bed Centre Lathe in stock in the UK Machine equipped with Fagor 2 axis DRO system with CSS ( Metric and imperial read out options) 3 jaw chuck Quick change toolpost and toolholders Rapid power traverse to saddle lighting Coolant system Chuck guard Rear splash guard

Condition: ready for operation (used), unipo 2TT1205CDN00 monitor unit TFT 12.1" consisting of 7FPT1462X503 12" UFP display unit + 7BXG0950GH01 UFP control unit, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Nledpfxsz Adfmo Ab Rsh

Year of construction: 2013, operating hours: 42,479 h, condition: good (used), functionality: fully functional, machine/vehicle number: M-iQ K-M54 V6 P6, For sale is a used, fully functional basket conveyor dishwasher from MEIKO. Technical specifications: Manufacturer: MEIKO Model: M-iQ K-M54 V6 P6 Year of manufacture: 2013 Length: approx. 5.30 m Basket dimensions: 500 x 500 mm Robust stainless steel construction Suitable for professional use in large kitchens, canteens, hotels, and catering establishments Condition: The machine is in used, well-maintained, and fully functional condition. The conveyor belt has been recently renewed, meaning that a significant wear part has already been replaced. The M-iQ series from MEIKO stands for high washing performance, efficient energy consumption, and reliable continuous operation in the professional kitchen environment. Inspection is possible by arrangement. I will gladly send further photos and technical information upon request. Used item sold without warranty, unless legally required. Nljdpeza A T Eefx Ab Rjh

Condition: new, Year of construction: 2025, functionality: fully functional, power: 7 kW (9.52 HP), input voltage: 400 V, type of input current: three-phase, cutting height (max.): 120 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, actuation type: electric, Equipment: CE marking, saw blade guard, scorer, Efficient and precise cutting with high ease of operation thanks to the electromotive adjustment of the main saw blade (height/angle) and the parallel fence. Powerful motor, speed up to 5,000 rpm, scoring saw speed up to 8,000 rpm. Double roller carriage, the heart of the panel saw, smooth-running and durable. Cutting length max. 3,200 mm Safe operation thanks to proven safety devices. Equipment: Machine frame: Torsionally rigid and self-supporting guarantees the necessary smooth running and stability Control: PLC control Electromotive height adjustment and tilt 0-45° for the main and scoring saw blade via push and hold button. Saw unit: Powerful motors for excellent cutting performance Drive power/speed of the main saw spindle with automatic brake Main saw motor 7 kW, speed adjustment by switching over the drive belt, speeds 5,000 / 4,000 / 3,000 rpm Speed of the scoring saw 8,000 rpm Quick-change system for the main saw blade Saw blade angle is displayed numerically Double roller carriage: Linear, round guide rails ensure a precise and durable system with high-quality cutting results and a long service life Small rollers inside the carriage guarantee smooth sliding during cutting incl. upper carriage locking Carriage length 3,200 mm Parallel fence: max. width 1,250 mm with electromotive adjustment removable fence High-quality work table made of robust sheet steel guarantees high rigidity Safety zone starts approx. 200 mm in front of the saw blade Crosscut fence: Cross position of the panel is displayed numerically with telescopic device for cuts up to 3,100 mm and 90° guarantee Njdpjz Dwftofx Ab Rslh Robust, gap-free flap units are easy to move Fence ruler is removable Cutting to length on the crosscut fence on the sliding carriage 3 digital displays with fine adjustment for high repeatability Display up to max. 3,200 mm Extraction: to prevent flying chips and dust protects the operator from hazards Table extension and table widening Design: Clamping shoe, sliding stick, sliding and return handle Miter stop for manual mounting on the sliding carriage Technical data: Main saw: Saw blade diameter 400 mm, speed 3,000/4,000/5,000 rpm, motor 7 kW S1 Scoring saw: Saw blade diameter 120 mm, speed 8,000 rpm, motor 0.75 kW S1 Saw blade tilt 0-45° Max. cutting depth at 45°: 85 mm Max. cutting depth at 90°: 125 mm Parallel fence: max. 1,250 mm Sliding carriage: 3,200 x 418 mm Max. cutting capacity: 3,200 mm Height adjustment: electromotive Angle adjustment: electromotive Table size: 1,020 (690+720) mm Extraction: Diameter 100 mm Space requirement: 6,700 x 3,900 x 1,890 mm CE marking in accordance with EU directives including documentation and maintenance instructions Saw blades are not included in the scope of delivery.

Condition: ready for operation (used), functionality: fully functional, Loma IQ metal detector Tunnel: 75 cm wide, 22 cm high Strip: 130 cm wide, 360 cm long, 75 cm high Perfectly working, ready to use. Located locally: Hungary (EU) Nlsdpfx Ajzhgx Teb Roh

Condition: used, Year of construction: 2015, Includes freewheeling function for AutoTrac. Display has small bubbles. Nljdpfe Ad Erzex Ab Rjh

Condition: good (used), Year of construction: 1998, Aerator TFT Rotoplus 400 straight from production AERATOR Manufactured by TANIS FOOD TEC Model RotoCompact TFT RP400 Jaar 1998 Including movable frame with product pomp and flowmeter. Holding tank also used for CIP Cool unit for mixing head integrated Siemens PLC control with recipes and CIP cycle Nsdjt N Um Iepfx Ab Rjlh Capacity 250 kg/hr of product including CIP pomp including dosing system for cleaning and sanatization

Condition: new, input voltage: 400 V, welding current at 60% duty cycle: 400 A, welding current at 100% duty cycle: 300 A, welding current (min.): 25 A, welding current (max.): 400 A, Lorch iQS series – Top-level welding for maximum productivity in industrial manufacturing Maximum performance and reproducible quality: The Lorch iQS series is a powerful, digitally networked MIG-MAG welding system for demanding industrial applications. The newly developed inverter generates an exceptionally stable and smooth arc. All parameters can be continuously adjusted to the optimal operating point – for high-quality, reproducible welds on steel, stainless steel, and aluminum. The iQS is suitable for both manual welding and robotic integration, providing a future-proof platform for modern manufacturing companies. Less spatter, less rework: The innovative Smart Process Control Engine enables continuous development of the available welding programs. New processes and functions can be transferred to the system, ensuring that users always work with the latest technology. The integrated RCS module improves short-circuiting in particular: the process runs more cleanly, the weld pool is easier to control, and spatter formation is reduced. This increases weld quality and reduces time-consuming and costly rework – especially on thin sheets under 3 mm. Lorch Speed processes for higher productivity: Depending on the configuration, proven Lorch processes such as SpeedPulse XT, SpeedArc, SpeedTwin, SpeedRoot, SpeedUp, and SpeedCold are available. They enable higher welding speeds, better penetration, attractive weld bead surfaces, and precise process control. Users receive a flexibly configurable solution for a wide range of materials, weld geometries, and welding positions. Intuitive operation with Smart Cockpit: The robust 7-inch Smart Cockpit can be operated via touchscreen or rotary control – even with welding gloves. A clear menu guides users, displaying only suitable material, wire, and gas combinations, thereby reducing incorrect settings. Important parameters can be accessed immediately via the configurable QuickAccess menu. Current values are visualized during welding; subsequently, the Hold function indicates whether the specified parameters have been met. Networked, robust, and easy to service: WLAN and Lorch Connect enable the recording, documentation, and analysis of welding data, as well as updates and future function upgrades. The encapsulated air duct, the dust-protected electronics area, and the modular design simplify maintenance and ensure uncomplicated service. Optionally, the robust MF-09 wire feeder complements the system with 4x4 drive, a quick-change system, and various chassis and transport options. Technical performance variants: The iQS 3 offers a welding range of 25 to 320 A, and the iQS 5 offers a range of 25 to 400 A. Both models operate on 3-phase power supplies from 380 to 480 V, have an IP23S protection rating, and a robust 4x4 wire feed unit. The equipment and scope of delivery depend on the chosen configuration. Document 1: technical details IQS series (EN) Document 2: brochure IQS series (EN) Document 3: technical data IQS series (DE) Document 4: brochure IQS series (DE) Nljdpfx Abszwfgbe Roh

Condition: used, Year of construction: 2015, Used GS3 2630 display, with AutoTrac and section control activation, and iTEC Pro activation for turning automation. Minor bubbles in the display; includes display mount and wiring harness. Additional activations are available for an extra charge. Nlsdpfx Ae Afia Seb Rsh

Condition: used, machine/vehicle number: H2X386V12010, Year of construction: 2019, operating hours: 14,594 h, load capacity: 1,600 kg, lifting height: 3,145 mm, mast type: duplex, overall weight: 3,200 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 3,145 mm Load capacity: 1,600 kg MACHINE DETAILS Mast design: Duplex mast with full free lift Battery voltage: 48 V Battery type: 6 PzS Battery capacity: 750 Ah Battery idle voltage: 51.13 V Service valid until: 10/2027 UVV (Occupational Safety) valid until: 10/2027 Dimensions & Weight Dimensions (L × W × H): 3,200 × 1,100 × 2,121 mm Weight: 3,200 kg Operating hours: 14,594 h EQUIPMENT Former Linde full-service unit EVO facelift model Color display Tilt angle display Side shifter Semi-cab Windshield with windshield wiper Roof window LED work light, front LED work light, rear Comfort seat with lumbar support Seat heating High-quality charger, year of manufacture 2026 Additional hydraulics: 3rd valve Additional hydraulics: 4th additional valve for fork positioner All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Nodsz S Ntaepfx Ab Rjlh Collection conditions: Side loading up to 6 tons is possible using a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 188

Condition: excellent (used), functionality: fully functional, Loma Systems IQ² | Pipeline Metal Detector Manufacturer: Loma Systems Model: IQ² (IQ2) Aperture diameter: Ø 53 mm Overall dimensions: 550 mm x 500 mm x 1530 mm The Loma Systems IQ² is an advanced, industrial metal detector specifically designed for inspecting products conveyed through pressurized pipelines. Devices from the British brand Loma are synonymous with reliability and the highest sensitivity in the food inspection systems industry. This model is designed for use with liquid, semi-liquid, viscous, and dense fillings. Thanks to its 53 mm aperture diameter, the detector is perfectly suited for continuous monitoring of meat masses (sausage and hot dog fillings), pâtés, sauces, soups, jams, liquid dairy products (processed cheeses), and fats. The IQ² series machine is characterized by exceptional precision in detecting metal contaminants – both magnetic (iron) and non-magnetic (brass, aluminum), as well as the most difficult to detect stainless steel. Njdjy Ub Urjpfx Ab Rjlh Key features and advantages: - Pipeline integration (Inline): The device's construction enables seamless inline installation directly behind vacuum filling machines from leading brands, before clipping machines or in pumping systems. - Advanced IQ² technology: An intelligent microprocessor and an automatic product learning system effectively compensate for the so-called "product effect" (often occurring with conductive, moist, and salty fillings). This prevents false alarms and downtime on the production line.