Used Jagenberg Diana 105-2 for sale (85,403)

Condition: excellent (used), Year of construction: 1991, Available immediately 3 points 4 nossels Crash lock 1/3 fold cd fold vibrator on feeder Nwedpfsv E N R Dsx Ai Ten

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Manufacturer: Jagenberg Machine type: Folder-gluer with automatic packing machine Model: Diana 104-1 + Japack 40-2 Nodornkwrspfx Ai Tewn Year of manufacture: FKM 1997, overhauled 2020 Year of manufacture: Automatic packing machine 1985, overhauled 2020 Location: 41751 Viersen, North Rhine-Westphalia Format range: min. 50 mm, max. 1,040 mm Equipment of the Diana 104-1: - Pre-breaking station with device for pre-breaking the 3rd creasing line - Module 150 with servo-driven overrun folding - Bottom gluing unit with 5 mm glue disk, including pump (for 30 l hobbock) - Folding station - Threading station / central transport - Transfer station - Pneumatic collecting/pressing device - Digital position sensors - Electronic control system, including counter and start/stop removal control Mode - Top gluing unit (model year 2021/2022) from BaumerHHS, type Xact, with 4 channels, 3 glue nozzles, touchscreen interface, job memory, including stainless steel piston pump This machine is equipped for processing side-glued folding boxes, lock-bottom boxes, single-fold folding boxes, and 4-point erectable boxes. A compressor is not included. Other: The machine is in very good condition, ready for operation, and can be inspected during production upon request. Availability: Immediately We look forward to your inquiry. Your WS Quack + Fischer Team

Condition: excellent (used), Year of construction: 1977, functionality: fully functional, machine/vehicle number: 210927, total width: 2,000 mm, total length: 15,000 mm, total height: 1,400 mm, The machine is being sold because our company's processing division has been discontinued. This Jagenberg Diana gluing machine is the ultimate all-rounder for folding carton gluing. Most of our folding cartons had an open size between 14 and 30 cm, but with a maximum width of 125 cm, large formats are no problem either. The machine can handle straight-line, crash-lock bottom, as well as 4- and 6-corner gluing. It was operated in single-shift mode without any technical issues. We retrofitted the quality inspection system from hhs, which includes product type detection with an ejection station and glue application monitoring. All belts were regularly replaced. The electric motor has been completely overhauled with new windings. The machine's main drive is via a robust coupling system rather than belts, as is common with later models. The machine is user-friendly, with all units easily accessible. Its overall condition is excellent, with only age-related signs of use. If interested, we can provide a video via email. Nwedpfsx R Sn Iox Ai Tjn

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2433380060, overall weight: 176 kg, nominal power: 0.75 kW (1.02 HP), rotational speed (max.): 950 rpm, protection type (IP code): IP54, The devices in the COLOUR JET series are optimally designed for extracting paint mist and solvents at wet painting workstations. The front guide plate ensures that the mist is captured from below and at the side inlets, as solvents from paints settle and collect near the floor. At the same time, the guide plate enables uniform air distribution over the filter and protects the filter medium from direct exposure. Paint pigments are separated by the large-area replaceable filter, and the cleaned exhaust air is then discharged to the outside via a pipe or hose. Nwodpfozkgwnsx Ai Ten Dimensions (W x D x H) in mm: 1,012 x 1,405 x 943

Condition: used, Year of construction: 1989, Jagenberg Diana 65-1 folder gluer, production year 1989. - Straight line gluing - 3-point gluing, crash lock, lock bottom Nwjdpfx Aiew H Rc Nj Tjn - KQ glue system with 4 guns - Machine cleaned, in production – can be inspected upon request, in very good condition

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 Condition: Well-maintained Equipment: Gantry milling machine High-Z S-1400T/105 (Rev. 1.5 - Facelift 2016) with ball screws Travel: 1400 x 1050 x 110 mm (X/Y/Z) Machine control Zero-3 (Rev. 1.3) for High-Z series, 5-channel, 110 - 240 Volt, 50/60 Hz Milling kit for High-Z S-1350 or S-1400T/105, additional stabilization of the Z-axis when machining very hard materials Energy arm for S-1350 and S-1400/105 Cable harness for clean routing of cables and hoses from milling motor, spray mist cooling, etc. Nedpfozu T Smsx Ai Tjwn T-slot plate on base frame for High-Z S-1400T/105 - 1790x1160mm (NL2016) 1790 x 1160 x 76mm T-slot keys, 8 pcs with bridge, M6 - 10 pcs. incl. screws M6x25 6 pcs. clamping bars 50x20x10mm M6 Base frame for combination with enclosure for S-1400T/105 - 1790x1450x900mm (NL2016) SET - Suhner milling motor UAD 30-RF / 1050W - 3,500-30,000 RPM, 230 Volt, 50/60Hz incl. 8mm and 10mm collets Collet set for Kress and Suhner (UAx-30RF) milling motors, 3.00mm / 3.175mm (1/8") / 6.00mm Milling cutter set, 10-piece (shaft 3.175mm) Wood milling cutter: 2x1mm / 2x2mm / 1x3mm Aluminum/plastic: 2x1mm / 2x2mm / 1x3mm Extraction nozzle made of aluminum for Kress or Suhner milling spindle Hose nozzle with Ø 32 and 38mm Dimensions 135x60x30mm Tangential module EOT-3, stroke 3mm Oscillating with 3mm stroke Connection cable for EOT-3 / TCM-4 for High-Z series - 5m Tungsten carbide blade type E12 - cutting edge 12mm Tungsten carbide blade type E18 - cutting edge 13.5mm EcoCam EC-4 continuous cutting pad 4mm / roll width 2m Always delivered in 2m roll width!!! 1m2 = 2 x 0.5m Tangential grooving module TCT-1 Tool holder type KR for grooving module TCT-1 for ball-bearing grooving wheels Grooving wheel B14 Grooving wheel B24 Side channel compressor Rubin 220, 1.5KW/50Hz vacuum pump incl. 3m spiral hose 40mm 230V/50Hz / 9.5A / 190mbar -190mbar / 71dB(A) Maintenance set High-Z series Grease gun + grease cartridge 400g + 100ml oil Network switch 5-port 10/100 Mbit/s + LAN cable 1m, 5x 10/100Mbps-RJ45 ports with auto negotiation Kinetic-NC control software incl. CNC-Pod (LAN), network cable + USB charging cable Vacuum table VT-150100 - 1500x1000mm incl. through-milling mat and connecting hoses Location: NRW Availability: Short-term Sold on behalf of a customer! Technical data without guarantee!

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 364080, color channels: 2, paper width (max.): 1,000 mm, paper height (max.): 700 mm, counter reading (black): 345,000,000, counter reading (color): 345,000,000, type of input current: three-phase, KBA Rapida 105 offset press, equipped with a perfector and specially configured for printing on thin paper. Price: 99.500 EUR FCA Year of manufacture: 2002 Impressions: 345 million Format: 1000 × 700 mm Colours: 2+0 or 1+1 Perfector: Yes Equipment: Suitable for thin paper printing Nwsdoznuyxspfx Ai Ten Availability: August 2026

Condition: used, Year of construction: 1999, Format: 1650 mm Equipment: Automatic feeder unit Extended folding and transfer section Press/delivery section Conveyor-type delivery Linear rail-based manual adjustment elements Top control panel / operator panel Safety equipment (protective guards, emergency stop, etc.) Njdpfx Aeyz Acqei Town Gluing line (glue application infrastructure available) 5 glue gun nozzles for 3/4-point gluing, or alternatively for longitudinal seam gluing Cold glue (PVA) Valkomelton gluing system Glue Station / 4-Point ??? 4 GP, 1999 Breaker: Jagenberg, 1999, Separator / Breaker Mosca RO MP2, 2000, Bundler

Condition: good (used), Year of construction: 1990, machine/vehicle number: 1044951, Size 90 cm, straight line, lock bottom, 6 feeder belts, vibrator on feeder, pre-fold station, final fold station Nodpoyx Trdjfx Ai Tswn

Condition: good (used), Year of construction: 2004, clamping force: 23,000 kN, Clamping force: 2300 t Screw diameter: 135 mm Type: Horizontal Drive: Hydraulic Injection Moulding Machine – ENGEL DUO 11050/2300 Year of manufacture: 2004 Operating hours: 70,029 h 🔧 Clamping Unit Clamping force: 2300 kN Platen dimensions (H × W): 2900 × 2500 mm Distance between tie bars (H × V): 2000 × 1600 mm Min. / Max. mould height: 700 – 1890 mm Maximum opening stroke: 3800 mm 💉 Injection Unit Screw diameter: 135 mm Injection volume: 8870 cm³ Shot weight (PS): 8071 g Injection pressure: 1600 bar ⚙️ Additional Equipment and Features Screw replaced in 2011, reinforced type – suitable for special materials. Option for two-component injection (2-shot). Mould tilting function. Magnetic platens. 2 hydraulic core pulls. 36 heating zones for the mould. 10 hydraulic cascade zones installed (expandable). Machine interface languages: English, German. Dimensions and Weight Net weight (including control cabinet): approx. 131 t (machine 113 t + control cabinet 18 t) Engel 2300 tonnes - 2004. Screw replaced in 2011. Reinforced screw for special materials. Can be injected twice. Option with mould tilting. Nodpfx Aijz Rplyj Tswn Magnetic plates. 2 hydraulic cores. 36 heating zones for the mould 10 hydraulic cascades installed in the machine, there are more Screw diameter 135 mm Languages in the machine: English, German Machine without robot , machine in excellent condition

Condition: excellent (used), Year of construction: 1994, Ref: 11166 . 1994 Jagenberg 78-1 Carton Gluer Suitable carton styles:      •     Straight-line cartons      •     Lock-bottom cartons Feeder Section      •     6 × 25 mm feeder belts      •     Feeder vibrator / jogger motor      •     2 adjustable main feeder gates      •     Nip rollers Pre-Fold Section      •     2 carriers positioned throughout the pre-fold section      •     1st and 3rd crease line pre-fold facilities Gluing Systems      •      HHS electronic cold glue system with 3 Guns      •     Bottom glue pot with 3 mm glue disc Folding Section      •     2 carriers with central steel support for larger blanks Transfer / Trombone Station      •     Fitted with 2 adjustable carriers      •     Original Jagenberg counter and marker device Nsdpj Afhirefx Ai Tswn Delivery Conveyor Total length: 4.3 m      •     2.5 m top compression section with adjustable lever pressure      •     Flow control stacker drive Total Machine Length 10.5 Meters

Condition: new, working width: 105,000 mm, Seppi M. H3 105 flail mower / DEMO unit / Year of manufacture: 2023 / including MS03 adapter plate / in stock & immediately available Price: €10,790.00 net / €12,840.10 gross - Working width: 105 cm - Overall width: 117 cm - Depth: 80 cm - Height: 66 cm - Weight: 217 kg Nodpfxjznrp Dj Ai Tswn - Mulching head for mounting on a hydraulic arm - mulches grass and shrubs up to 3 cm in diameter - for excavators from 2 to 5 tons - for mounting on various adapter plates - floating mounting (parallelogram linkage) - indirect V-belt drive with 3 V-belts - drive designed for hydraulic motor depending on the flow rate of the carrier machine - housing made of wear-resistant AR400 steel - front protection with chains - rear protection made of rubber - reinforced support roller with double tapered roller bearing, height-adjustable - Color: red RAL3020 · anthracite RAL7021 OPT 039 Rotor with SMW flail (standard) - 9 pieces, part number 150.02.041 OPT 429 Hydraulic gear motor 17cm³ - with flow control valve and motor safety valve DRAIN SAFE TM, which protects the motor in case of incorrect use - required hydraulic pressure in bar (min-max): 150 - 250 - required hydraulic flow rate in l/min (min-max): 35 - 60 OPT 529 DRAINLESS system with pressure accumulator (NO leak oil line required!!) - including hoses and check valve OPT 372 hydraulic 190° swivel device 2 hydraulic lines are required: supply and return. No leak oil! In addition, a hydraulic circuit for the swivel ring is required. The unit is supplied without hoses and connections. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) are in stock and immediately available. We have a very large selection of various Seppi M. products in our warehouse that are immediately available! Please contact us for this at . If you wish, we will also be happy to provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. range for you! Errors and prior sale excepted! = More information = Year of manufacture: 2023 Please contact Marius Herden for more information.

Condition: new, working width: 105,000 mm, For inquiries regarding the attachment, Mr. Herden will assist you (by phone at ...). Seppi M. H3 105 Mulcher / incl. rotation motor / NEW / in stock & immediately available Price: €10,590.00 net / €12,602.10 gross - Working width: 105 cm - Overall width: 117 cm - Depth: 80 cm - Height: 66 cm - Weight: 217 kg - Mulching head for mounting on a hydraulic boom - Mulches grass and brush up to 3 cm Ø Nodpfx Aeyix Htji Town - Suitable for excavators from 2 to 5 tons - Compatible with various mounting plate systems - Floating mount (parallelogram guide) - Indirect V-belt drive with 3 V-belts - Drive suitable for hydraulic motor depending on the carrier machine's hydraulic flow - Housing made of wear-resistant AR400 steel - Front protection with chains - Rear protection with rubber guard - Reinforced support roller with double taper roller bearings, height-adjustable - Color: red RAL3020 · anthracite RAL7021 OPT 039 Rotor with SMW hammers (standard) - 9 pcs., part number 150.02.041 OPT 429 Hydraulic gear motor 17 cm³ - With flow control valve and "DRAIN SAFE TM" motor safety valve protects the motor in the event of incorrect use - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow in l/min (min-max): 35 - 60 OPT 529 DRAINLESS system with pressure accumulator (NO drain line required!) - Including hoses and check valve OPT 372 Hydraulic 190° rotation device Optional: MS03 adapter plate incl. intermediate flange, bolts and installation = €700 net Two hydraulic lines are required: supply and return. No drain line needed! Additionally, a separate hydraulic circuit is required for the rotator. The machine is delivered without hoses or couplings. Many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We have a wide selection of various Seppi M. products available from stock! Feel free to contact us at / . Upon request, we are happy to provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply you with the complete Seppi M. product range! Subject to errors and prior sale! = More information = Contact Marius Herden for more information.

Condition: new, Year of construction: 2024, Special offer: €42,000 (instead of €49,900), excluding VAT. Immediately available / Made in Italy Included premium features: - Heidenhain ND5023 3-axis position display - 5-position length stop for the carriage - SRW-Amestra Multifix C quick-change tool holder with 4 inserts - LED work area lighting - Set of leveling pads from Spinelli Standard features: - Double mechanical clutch - Electromagnetic brake - Rapid traverse - Air supply on the tailstock to facilitate movement along the bed - Bed, legs, headstock, tailstock and carriage made of cast iron - Bed guides are induction hardened and ground - Headstock with induction hardened and ground gears - Spindle is mounted on high-precision bearings - Friction-free movement of the carriage - Electrical system in an airtight cabinet with components from Siemens and/or Schneider - Spindle reduction sleeve - 2 dead centers - Chuck guard with microswitch, turret plexiglass guard, rear guard covering the entire machine length, guard for leadscrew and feed rods, emergency stop button - Chip tray on wheels - Cooling system with electric pump - Central lubrication of the guides with automatic pump - Traveling and steady rest - Service tools and wrenches, test certificate, electrical diagram, operating and maintenance manual - Machine built according to EC standards Optional features: - 3- / 4-jaw chuck Technical data: - Center height: 260 mm - Swing over bed: 520 mm - Swing over carriage: 300 mm - Swing over cross slide: 690 mm - Distance between centers: 1500 mm - Bed width: 400 mm - Spindle bore: 105 mm - Spindle nose: 11" Camlock - Spindle speed steps: 12 - Spindle speed: 16 - 1200 rpm - Main motor power (S1 - 100%): 7.5 kW (optional 9.2 kW) - Longitudinal feed: (93) 0.028 - 6.43 / (65) 0.063 - 2.52 mm/rev - Cross feed: (93) 0.012 - 2.73 / (65) 0.027 - 1.07 mm/rev - Metric threads: (54) 0.5 - 224 / (22) 1 - 14 mm - Whitworth: (54) 1/8 - 72 / (25) 2 - 28 tpi - Module threads: (54) 0.5 - 112 / (18) 0.5 - 7 mm - Diametral pitch: (54) 1/4 - 64 / (24) 4 - 56 dp - Cross slide travel: 340 mm - Compound slide travel: 150 mm - Tailstock quill diameter: 85 mm - Tailstock quill travel: 200 mm - Tailstock quill taper: MK5 - Total weight: 3200 kg Nsdpfxopq R Rds Ai Tjwn

Condition: used, Year of construction: 2014, x-travel 1060 mm Nodpfe Aaq T Njx Ai Town y-travel 520 mm z-travel 610 mm control Siemens weight of the machine ca. 5900 kg

Condition: new, working width: 105,000 mm, For inquiries regarding the attachment, Mr. Herden will be happy to assist you by phone. Seppi M. H3 105 Mulcher / NEW / in stock & immediately available Price: €6,490.00 net / €7,723.10 gross - Working width: 105 cm - Total width: 117 cm - Depth: 80 cm - Height: 66 cm - Weight: 217 kg - Mulcher head for mounting on a hydraulic arm - Mulches grass and brushwood up to 3 cm diameter Nwodjyix Hmspfx Ai Tjn - Suitable for excavators from 2 to 5 tonnes - Can be fitted to various adapter plates - Floating mount (parallelogram linkage) - Indirect V-belt drive with 3 V-belts - Drive prepared for hydraulic motor, depending on the hydraulic flow of the carrier machine - Housing made of wear-resistant AR400 steel - Front protection with chains - Rear protection made of rubber - Reinforced support roller with double-taper roller bearings, height-adjustable - Color: red RAL3020 · anthracite RAL7021 OPT 039 Rotor with SMW hammer flails (standard) - 9 pieces, Part No. 150.02.041 OPT 429 Hydraulic gear motor 17cm³ - With flow control valve and DRRAIN SAFE™ motor safety valve protecting the motor from incorrect use - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic oil flow rate in l/min (min-max): 35 - 60 Optional: MS03 adapter plate incl. bolts and installation = €530.00 net 3 hydraulic lines required: pressure, return, and leakage oil. The unit is supplied without hoses and fittings. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. We have a very large selection of various Seppi M. products in stock for immediate delivery! Mr. Herden (phone number) is happy to assist you. Upon request, we are also pleased to provide you with a financing offer. We are an official sales and service partner for Westtech. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official DMS sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Weber MT sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! = Further information = Intended use: Agriculture Please contact Marius Herden for more information.

Condition: excellent (used), Year of construction: 2006, _M 46_ _Engel VC 1050/220 HL_ Clamping force: 220 t Year of manufacture: 2006 Control system: CC 200 Screw diameter: 55 mm Screw type: POM Njdpfjzu R H Ujx Ai Tswn Min. mold height: 300 mm Max. opening stroke: 750 mm Max. platen distance: 1,050 mm Ejector stroke: 180 mm Tie-bar spacing (H × V): 860 × 830 mm Platen size: 560 × 600 mm Quick clamp: Yes Core pull: 2× Needle shut-off: 2×

Condition: excellent (used), Year of construction: 2004, ENGEL DUO 11050/2300 Injection Molding Machine Manufacturer: ENGEL Model: DUO 11050/2300 Year of manufacture: 2004 Operating hours: 70,029 h Type: Hydraulic injection molding machine Category: Large-size injection molding machine Clamping force: 23,000 kN / 2300 tons Clamping Unit Clamping force: 23,000 kN Dimensions of mold mounting plates: 2900 x 2500 mm Distance between columns: 2000 x 1600 mm Minimum mold height: 700 mm Maximum mold height: 1890 mm Maximum opening width: 3800 mm Injection Unit Nsdpfx Ajzkatcsi Town Screw diameter: 135 mm Injection volume: 8870 cm3 Injection weight (PS): 8071 g Injection pressure: 1600 bar Additional equipment according to available data Number of hydraulic cores: 2 Number of mold heating zones: 36 Number of hydraulic cascades: 10 Magnetic platens Mold tilting option Screw replaced in 2011 Screw reinforced for special materials Machine without robot Dimensions and weight Weight of the main unit: 113 t Weight of the control cabinet / additional components: 18 t Approximate total weight: 131 t

Condition: good (used), Year of construction: 2011, operating hours: 78,000 h, functionality: fully functional, clamping force: 2,200 kN, screw diameter: 55 mm, injection pressure: 1,615 bar, total length: 5,700 mm, total width: 1,700 mm, total height: 2,200 mm, overall weight: 12,200 kg, warehouse no.: 503731 manufacturer: ENGEL type: Victory 1050-220 spex controller: CC 200 A02 year of construction: 2011 operation hours: 78000 h Njdpfx Aijz D U Ilj Tewn clamping force: 2200 kN size of mould plates h x v: 880 x 830 mm min. mould height: 300 mm max. open daylight: 1050 mm opening stroke: 750 mm screw diameter: 55 mm injection volume: 510 ccm Spritzdruck: 1615 bar equipment included: screen text german core pulling hydraulically 2x machine incl. Handling Anti vibration mounts mould heating 8x technical data robot-system handling type: Linear manufacture: ENGEL controller: Viper 6 year of construction: 2011 measures of machine l x w x h: 5.7m x 1.7m x 2.2m total weight: 12200KG

Condition: excellent (used), Year of construction: 2017, ENGEL DUO 11050/2300 injection molding machine Year of manufacture: 2004 Operating hours: 70,029 h Type: hydraulic, two-platen, large-format injection molding machine Clamping unit • Clamping force: 23,000 kN / 2300 t • Dimensions of mounting plates: 2900 × 2500 mm • Distance between columns: 2000 × 1600 mm • Minimum mold height: 700 mm • Maximum mold height: 1890 mm • Maximum opening width: 3800 mm Injection unit • Screw diameter: 135 mm • Injection volume: 8870 cm³ • Injection shot weight for PS: 8071 g • Maximum injection pressure: 1600 bar • Screw: replaced in 2011 • Screw design: reinforced, adapted for processing special materials Additional equipment • Magnetic plates for mold mounting – functional and ready for use Nedpfx Aiozvwl Ts Tswn • Number of hydraulic cores: 2 • Number of mold heating zones / hot runner channels: 36 • Number of hydraulic cascades: 10 • Mold tilting option • Robot: not included Magnetic mold clamping system The machine is equipped with functional magnetic plates, enabling quick mold mounting and replacement. The system is fully operational and constitutes a significant piece of additional equipment for the machine, especially with frequent mold changes. Machine weight • Weight of the main unit: approx. 113 t • Weight of the control cabinet and additional elements: approx. 18 t • Total approximate weight: approx. 131 t

Condition: ready for operation (used), Year of construction: 1999, Vertical machining center / EUMACH MC 1050 P - Heidenhain 426 -CE marking -Heidenhain 426 control system -Oil cooler -COMPLETE TECHNICAL SPECIFICATIONS – SEE PHOTOS -Complete documentation Njdpfozmqigox Ai Tewn Dimensions: L x W x H 2.8 x 3.45 x 2.8 meters / Weight: 6500 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 32,000 h, functionality: fully functional, clamping force: 2,100 kN, screw diameter: 50 mm, clearance between the columns: 580,580 mm, injection weight: 402 g, opening stroke: 690 mm, installation height: 340 mm, Incl. Geiger robot Midiliner F 10.0 year 2011, Conveyor and safety cage Nodpfx Aie Aarbbj Tjwn

Condition: good (used), 380 VoltFixed speed More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. Nodpez Rdr Ijfx Ai Town See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: used, mileage: 400,000 km, power: 280 kW (380.69 HP), first registration: 07/2005, fuel type: diesel, overall weight: 36,000 kg, axle configuration: > 3 axles, color: white, gearing type: mechanical, emission class: euro3, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, SCANIA 114 G 380 8 x 4 HIAB CRANE 2 x LIFT AXLE *ROLL-OFF TIPPER----VEHICLE HISTORY * VEHICLE ORIGINATES FROM THE NETHERLANDS * DELIVERY TO ALL PORTS POSSIBLE UPON REQUEST VEHICLE EQUIPMENT * MANUAL GEARBOX * RETARDER * STEERING AXLE * CRUISE CONTROL * 2 X LIFT AXLE Nwedjy Sq Ehjpfx Ai Ton * HIAB LOADING CRANE * TYPE: 105 Z * 7.8 M LONG * TRAILER COUPLING * ROOF SPOTLIGHTS * TOOL BOX * GVW: 36,000 KG * PAYLOAD: 15,032 KG * VERY GOOD TYRES * IMMEDIATELY OPERATIONAL FOR MORE INFORMATION: ----EXPORT DECLARATION, CUSTOMS EXW WITHIN 10 MIN. (APPROVED EXPORTER) 5 DAY, 15 DAY, 30 DAY LICENSE PLATES, AND 15 DAY AUSTRIAN PLATES EURO 1 TECH. DATA SHEET (DATA TECNICI) RESERVATIONS FOR VEHICLES ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID For sales to the EU and third countries, a deposit/guarantee of at least €500.00 / €1,000.00 will be levied. Subject to change, error, and prior sale! More vehicles can be found on our website. Sale only according to our General Terms and Conditions – see website Important note – Important information: Despite careful verification of all details in our offer, errors may occur. Some may be due to transmission errors in the systems of the various platform providers. Therefore, we point out that all information is provided without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer in terms of §145 BGB. Rather, it is for information purposes regarding contract initiation. The information provided here is without guarantee and does not constitute warranted characteristics.

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (available by phone at [phone number]). Seppi M. MINI-BMS 105 / 5-10 tons / Forestry Mulcher / CUT CONTROL / DEMO unit / Year of manufacture: 2023 / In stock & immediately available Price: €14,090.00 net / €16,767.10 gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher for excavator mounting - For mulching along riverbanks, in forests and other hard-to-reach areas - Mulches bushes and shrubs up to 10 cm in diameter - For excavators from 5-10 tons - For mounting on various attachment plates - Drive designed for hydraulic motor, depending on the flow rate of the carrier machine - Indirect V-belt drive with 5 V-belts Nwjdsyltv Uspfx Ai Ton - Reinforced housing made of wear-resistant AR 400 steel - Forged counter-blades - Hydraulically adjustable hood - Continuous hinge over the entire hood length - Front protection with chains - Rear protection with chains - Support skids, height-adjustable, reinforced with a carbide plate - Color: red RAL3020 · anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide pads) 21 pieces, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29-58 cm³ and overpressure valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow rate in l/min (min-max): 60 - 130 Intermediate adapter for BE314 Z1 - Approx. 200 mm high Optional: MS08 adapter plate incl. screws and mounting = €1,410.00 net We have many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. For the drive, a self-contained hydraulic system is recommended. 3 hydraulic lines are required: supply, return and drain. An additional double-acting hydraulic connection is required for the hydraulic hood. The unit is supplied without hoses, connections and attachment plate. Upon request, we will also provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telescopic loader sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply you with the complete Seppi M. program! Errors and prior sale excepted! Internal No.: 170048 Year of manufacture: 2023 Please contact Marius Herden for further information.