Used Keller Suction Unit for sale (32,783)

Condition: used, Year of construction: 2015, A Keller extraction system in need of repair is offered for sale. Extraction capacity: 7500m³/h, negative pressure: 250daPa, extraction ductwork: DN355/DN400, exhaust stack: DN560 including silencer, fan type: MAE , shaft power: 6.89kW, speed: 2915rpm. A service check including inspection of the filter elements and air-flow measurements was carried out in 2024. This revealed increased differential pressure across the filter cartridges, leaks and insufficient air flow. Including wall bracket. Documentation available. An on-site inspection is possible. Bsdpfxjz Hn Svo Ahmjdh

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: TAM-164, compressed air connection: 6 bar, input voltage: 400 V, total width: 1,880 mm, total length: 8,200 mm, total height: 1,950 mm, type of input current: three-phase, input current: 32 A, warranty duration: 3 months, pneumatic connection: 12 bar, power of the servo motor: 14,000 W, Equipment: CE marking, documentation/manual, type plate available, Used automatic KELLER Tampo master pad printing machine, designed for decorating pens and cylindrical parts. The machine enables 3-colour printing. The machine operates in fully automatic mode: the operator loads the parts into the feeder, and after completion of the process, the finished parts are automatically unloaded into a carton. The equipment includes a servo-driven chain conveyor, automatic part loading and unloading modules, a positioning station, an ionizer, three independent pad printing modules with an automatic pad cleaning system, hot-air drying between the individual printing stations, an IR drying tunnel after completion of the printing process, and a vision inspection system for print quality with automatic rejection of defective parts. Adjustable conveyor prisms and pneumatic rotary modules allow the machine settings to be adapted to different part dimensions. The machine is controlled by a Mitsubishi PLC and a 10″ HMI touchscreen, allowing recipes and process parameters to be managed. The machine is also equipped with a remote communication module. The production process starts with the automatic transfer of the part from the feeder onto the conveyor. The ionizer neutralizes electrostatic charges on the surface of the part before printing. The part is then positioned and transferred successively to three pad printing stations. Each station applies one colour, with hot-air drying between the individual printing stages. After completion of the three-colour printing process, the part passes through the IR drying tunnel and is then subjected to automatic vision inspection. Finished parts are automatically unloaded into a carton, while parts with detected defects are diverted to a separate container. Maximum graphic size: 60 × 60 mm Part dimensions: length 60–150 mm, diameter 8–14 mm. Machine output: up to 2400 pcs/h. Electrical power supply: 3 × 400 V, 32 A. Required compressed air pressure: 6–8 bar. The machine is operational and in working condition. A link to a video showing the machine in operation is provided below. Bjdpfx Ajz D Ht Tjhmjdh Before sale, the machine will undergo servicing, and we provide a 3-month warranty. The machine can be inspected and demonstrated in operation at our premises in Poland (European Union). The standard demonstration includes a presentation of the machine's operation. Upon request, we can perform paid technological tests using the customer's parts. The machine is sold in the condition and configuration shown in the photographs. Upon request, modifications or additional equipment can be provided according to the customer's individual requirements. Standard delivery terms: EXW. We can additionally arrange transport to a location anywhere in the world. Additional equipment: possibility of manufacturing dedicated tooling for a specific part and carrying out technological tests, including selection of printing parameters and consumables. The price is quoted in EUR.

Condition: like new (used), functionality: fully functional, machine/vehicle number: Nilfisk Industriesauger R104 V 4031600000, R104 X Product number: 4031600006 The industrial vacuum cleaners in the R series are designed to vacuum up and compress trimmings, cutting dust, and manufacturing waste of all kinds (plastics, paper fragments, or fabric scraps) in order to be able to return them to the recycling loop. Originates from a cleanroom manufacturing process, plastic granules. Industrial vacuum cleaner for compressible material. The industrial vacuum cleaners in the R series are designed to vacuum up and compress trimmings, cutting dust, and manufacturing waste of all kinds (plastics, paper fragments, or fabric scraps) in order to be able to return them to the recycling loop. • Reduces downtime through continuous cleaning • Compression and easy removal of the collected material • Dust removal from the work environment • Recycling of trimmings • Flexible due to different performance classes • Container sizes, maintenance-free • Simple monitoring • Unattended operation possible. Nilfisk industrial vacuum cleaner R104 V 4031600000 Article number: NILFISK-4031600000 R104 X Product number: 4031600006 The industrial vacuum cleaners in the R series are designed to vacuum up and compress trimmings, cutting dust, and manufacturing waste of all kinds (plastics, paper fragments, or fabric scraps) in order to be able to return them to the recycling loop. Industrial vacuum cleaner for compressible material Bdodpfx Aew D Upzehmsh The industrial vacuum cleaners in the R series are designed to vacuum up and compress trimmings, cutting dust, and manufacturing waste of all kinds (plastics, paper fragments, or fabric scraps) in order to be able to return them to the recycling loop.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, The device comes with a new belt, a spare belt, and additional brushes. It includes a complete set of BOECK brushes with sandpaper, as well as extra wire brushes for removing oxides, as shown in the photo. The set also features a complete extraction system with industrial filters (filter ventilation unit) from Keller. Bjdpfx Ahox Ht Rvomjdh

Condition: ready for operation (used), Year of construction: 2018, Suction capacity: 3000m³/h, blower capacity (free-blowing): 4000m³/h, differential pressure: 1750Pa, dust storage capacity: 95l, filter cartridges: 2, machine dimensions X/Y/Z: approx. 1050mm/850mm/3000mm, weight: approx. 230kg. Documentation available. An on-site inspection is possible. Bdsdpfjxguc Dox Ahmjh

Condition: used, Year of construction: 2020, An FGC extraction system for the extraction of oil and coolant aerosols from one or more CNC machines is offered. Volumetric flow rate: 600m³/h, motor power: 1.5kW. Including telescopic stand. The filters should be replaced. An on-site inspection is possible. Bdedpfjzxr R Ajx Ahmjh

Year of construction: 2022, condition: new, Lundberg WasteTech 400 All-in-one Unit for Trim Edge Extraction Maximum extraction capacity: 6,000 m³/h (3,540 CFM) Maximum pipe diameter: 315 mm (1’-1”) Maximum extraction distance: up to 30 m (100’) Bjdpfx Asy Sbc Rohmsdh Dimensions (LxWxH): 2615 x 1300 x 3330 mm (8’-7” x 4’-3” x 10’-11”) Weight: 615 kg (1,356 lbs) Extraction fan power: 15 kW (20 HP) Power connection: 3-phase, 230-460V, 50-60 Hz Noise level: 68-72 dB(A) Colour: blue, RAL5010 Including the following accessories: Antistatic unit M5/M6 filter incl. pressure monitoring sensor WT400 frequency converter Bag level sensor TubeBag System (continuous bag) According to the manufacturer, simultaneous extraction from up to 24 trim edges is possible. The unit is in as-new condition and was only operated for a few hours. On-site inspection is possible. Original purchase price of the system approx. €65,000 incl. accessory options.

Year of construction: 1990, condition: used, LIQUIDATION SALE – IMMEDIATE AVAILABILITY Due to the closure of the production facility, we offer for sale a complete used technological line for the production of ceramic products, consisting mainly of HANDLE and KELLER equipment. Complete production line price: EUR 400.000 net, EXW, negotiable. To facilitate a quick sale, we also offer: • the complete production line, • individual production sections, • individual machines and equipment. Prices for individual machines are available upon request. Reasonable offers will be considered. Preference will be given to buyers able to complete the transaction and collect the equipment quickly. The line consists of the following machines and equipment: 1. Raw material pre-processing section • HANDLE R469 edge runner, year of manufacture 1955 • AGW 1065/1085 roller crusher, year of manufacture 1963 • WF 1080A roller crusher, year of manufacture 2005 • Belt conveyors – 4 units • Control cabinet 2. Forming section • HANDLE MDVG 920B mixer, year of manufacture 1990 • HANDLE PZG 56A/50 extrusion press, year of manufacture 1990 • KELLER type 4155 cutter, year of manufacture 1990 • Belt conveyors – 4 units • Control cabinet Bjdpfx Ahjy Nzpremedh The equipment is characterized by robust construction, durability and straightforward maintenance. The production line was in continuous operation until the end of 2025 and is available for inspection at the plant in Panoszów, Poland. The machines are available immediately. Quick completion of the transaction and prompt collection are preferred. Please specify in your inquiry whether you are interested in the complete line, a production section or a particular machine. Additional technical information, photographs and individual prices are available upon request.

Condition: new, Year of construction: 2024, Suction nozzle diameter: 150 mm Volume flow rate: 3000 m³/h Negative pressure: 3500 Pa Air velocity: 47 m/s Chip collection bag volume: 2 x 0.1426 m³ Filter area: 5 m² Filter cleaning: manual Motor power: 1.5 kW Bdsdpfx Ahjknyhhemjh Dimensions: Weight:

Condition: used, • Can rotate and tilt Bdjdpfjyf Ecmsx Ahmoh • Weight – 170 kg • Load capacity – 150 kg • With Demag chain hoist • Automatic suction cups • With pneumatic cylinder • 8 suction cups – 4 suction cups are continuously adjustable • 4 adjustable

Condition: new, Year of construction: 2025, Suction nozzle diameter: 260 mm Nominal volumetric flow rate: 7700 m³/h Chip collection bag volume: 2 x 290 l Filter cleaning: manual Motor power: 4.8 kW Bodohw I Szjpfx Ahmedh Dimensions: 1900 x 670 x 2800 mm (L x W x H) Weight: 88 kg

Condition: good (used), 210140 Surface Filter VARIO 4 – P, with cleaning control, without switchgear and control unit ex works. Price: on request + VAT (condition as illustrated in the photo). Incl. pre-separator. Motor power: 22 kW, 400 V, 50 Hz. Airflow: approx. 10,000 m³/h – 12,000 m³/h. Disposal: 3 x 50 L disposable containers. Subject to prior sale! Bodoy It Azspfx Ahmodh

Condition: good (used), 210138 Surface Filter UNI STAR X, with factory-installed control and switching unit. Price: on request + VAT (condition as shown in the photo). Motor power: 3.3 kW, 400 V, 50 Hz. Air flow rate: approx. 1,500 - 2,500 m³/h Disposal: 2 x 30 L disposable containers. Subject to prior sale! Bsdpfoy It Eiex Ahmjdh

Condition: good (used), 210137 Surface filter VARIO 2.3, with factory-installed switching and control unit. Price: on request + VAT (condition as shown in the photo). Motor power: 11 kW, 400 V, 50 Hz. Airflow: approx. 5,000 m³/h at 4,800 Pa. Disposal: single hopper support; 200 L lidded drum with pneumatic docking device. Subject to prior sale! Bodpfxoy It Dro Ahmodh

Condition: new, Year of construction: 2025, Suction nozzle diameter: 120 mm Volume flow rate: 1900 m³/h Negative pressure: 2500 Pa Chip collection bag volume: 1 x 1426 m³ Filter cleaning: manual Motor power: 1.1 kW Dimensions: 1000 x 500 x 1800 mm (L x W x H) Bdodpfxjh Ekx Is Ahmjh Weight: 39 kg

Year of construction: 2017, condition: as good as new (ex-display), Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A Bdedpjiiyr Sjfx Ahmoh 1 grinding wheel each coarse and fine Machine stand, emergency stop pushbutton and brake, and suction unit

Year of construction: 2018, condition: as good as new (ex-display), Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine Machine stand, emergency stop pushbutton and brake, and suction unit Also other models available from stock! Inquire about the current stock. Bodeiiyuqepfx Ahmodh

Condition: good (used), 210131 VARIO 2.2 surface filter, with switching and control unit installed at the factory. Price: on request + VAT (condition as shown in the photo). Motor power: 7.5 kW, 400 V, 50 Hz. Airflow: approx. 4,000 m³/h. Disposal: 2 x 30 L disposable containers. Subject to prior sale! Bdsdpfxorzrimj Ahmoh

Condition: used, 1. Four-way load chain 2. Raute electronic centering device with pendulum loader Bodpfx Ahjzka Sxjmedh 3. Keller sheeter with double telescopic spindle Model 10K 23T Maximum log diameter 1000mm Maximum log length 2300mm Minimum log length 800mm 120kW DC spindle motor Brushless motor for blade feed Year of manufacture 1988 3.4 Automatic wrapping unit

Year of construction: 1992, condition: good (used), Dust extraction system, manufacturer: KELLER LUFT-TECHNIK Type: UNI-STAR X-SL, year of manufacture: 1992 Motor: 3.3 kW Maximum air volume flow rate/hour: 2,300 Filter area: 30 m2 Bjdei E Td Hepfx Ahmjdh 8 cartridge filters are installed. Dimensions: 0.9 m x 1 m x 3.5 m, weight: approx. 1000 kg. In good working condition.

Condition: used, Year of construction: 1998, Technical details: total power requirement: 3,3 kw volume capacity: k.A. m³/h rated current: 14 - 15 / 8 - 8,5 A filter: Größe ca. B:660xT:1000xH:1060mm mm motor capacity: 3,3 kW weight of the machine approx.: 600 kg Bdsdsvdczajpfx Ahmjh dimensions L x W x H: 1,45 x 0,8 x 2,0 m Dry separator with fan is sold as is. Built-in sheet steel construction Filter surface VARIO T 1.5 f=50 Hz Filter: 6 filter elements; dust extraction via container Ø 300 x H: 380mm Fan: Intake opening Ø 250 m; connected load 380V Exhaust air opening via ceiling External operation (was integrated in a laser cutting system Trumpf) *

Condition: used, Year of construction: 2012, type of input current: three-phase, filter area: 62 m², suction capacity: 2,500 m³/h, negative pressure: 9,000 Pa, Dust extractor, welding fume extractor, self-cleaning pneumatic filter, vacuum dust collector, absorber for plasma, laser, sandblasting, and all types of dry dust. The filter is pneumatically cleaned with compressed air pulses during operation, resulting in high device efficiency. Large filtration area requiring minimal space. High mechanical stability of the filter material ensures long service life. Compared to conventional rigid filters, it causes minimal pressure loss. Short bursts of compressed air during the filtration process provide effective filter cleaning. Fan power: 7.5 kW Capacity: 2,500 m³/h at a pressure of up to 9,000 Pa Filter cartridges: 11 pcs Filtration surface: 62 m² The device is equipped with an automatic system for impregnating cartridge filters. The extractor is designed for special applications where the filtered fumes and dust may be moist and sticky. Adding impregnating agent captures moisture from the fume, protecting the filters from clogging. Bedpfxsxrpmzo Ahmodh In this case, the lifespan of the cartridge filters is increased. Stock number: 0981

Condition: used, Year of construction: 1999, suction capacity: 5,600 m³/h, negative pressure: 3,000 Pa, Dust extraction, welding fume extraction, self-cleaning filter, pneumatic, vacuum dust extractor, plasma, laser, sandblasting and all types of dry dust. Filter cleaned pneumatically with compressed air pulses during operation, which results in high efficiency of the device. Sinbran filter cartridges. SINBRAN filter cartridges are environmentally friendly and therefore suitable for use in the pharmaceutical and food industries. They are suitable for separating aerosols of organic materials, such as those created during laser cutting operations. Bdjdpfx Asvxtkzehmjh SINBRAN filter cartridges combine the advantages of membrane filters with the advantages of rigid body filters: Large filter surface requiring minimal space. High mechanical load capacity, very long life cycle, low pressure drop and high filtration efficiency is a new approach to dust removal that achieves impressive filtration results, even in particularly difficult applications. High mechanical stability of the filter material ensures long service life. Compared to conventional rigid filters it causes minimal pressure loss. Short compressed air pulses during the filtration process ensure effective filter cleaning. 7.5 Kw fan Efficiency 5600 m3/h Sinbran filter inserts 12 pcs. Negative pressure 3000 Pa

Condition: excellent (used), Year of construction: 2008, 1 x Oil Mist Extractor Keller Lufttechnik OENA-0.5-K-H11 Year of manufacture: 2008 In very good condition. Bedpsxvrw Dsfx Ahmsdh The extraction unit can be inspected at our warehouse.

Condition: used, Absaugarm aus Metallrohr und wird für das Punktschweißen, Laboranwendungen und die Nebelabsaugung Ventilatoren der FUA Serie können als Direktmontagelüfter für Absaugarme Suction Arm is ideal for grinding, polishing and other types of high-dusting Operations Absaugung - Ventilator / Suction - Fan Plymovent MMH-100-15 - FUA-1300 Baujahr / Year 2007 - Serial-No. 7402 Einsatzmöglichkeiten: Punktschweißen / Spot welding Schleifen und Polieren / Grinding and polishing Laboranwendungen / Laboratory Applikation Nebelabsaugung / Mist collection Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Bsdpfxjz Hwyps Ahmedh On Stock Emskirchen/Nürnberg - Available Immediately - Can be test